summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-12-29V4L/DVB (9659): uvcvideo: Use {get|set}_unaligned_le32 macrosLaurent Pinchart1-12/+6
Replace combination of endianess conversion and unaligned access macros with {get|set}_unaligned_*. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9658): em28xx: use em28xx_write_reg() for i2c clock setupDevin Heitmueller2-15/+58
Convert the calls that write the i2c clock register over to the new em28xx_write_reg() function that allows for or'ing bits Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9657): em28xx: add a functio to write on a single registerDevin Heitmueller2-0/+8
Introduce a new function that writes to a single register. This is useful because the vast majority of register writes are a single register, and this format permits or'ing register value bits together. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9654): new email addressJelle Foks3-5/+5
Please accept this patch to refer to my new email address Signed-off-by: Jelle Foks <jelle@foks.us> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9653): em28xx: improve AC97 handlingMauro Carvalho Chehab3-33/+74
AC97 devices provide several input and outputs. However, before this patch, em28xx device weren't properly allowing the usage of ac97 possible combinations. Also, several input volumes were left untouched, instead of making sure that the volumes were set on mute state. This patch improves support for ac97 devices by allowing to use any inputs, and making sure that unused inputs are set on mute state. Yet, some work is still needed to select the AC97 output. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9652): em28xx: merge AC97 vendor id's into a single varMauro Carvalho Chehab2-6/+8
This makes easier to identify vendor ID, since AC97 vendors are generally identified by 3 bytes. The remaining byte is used by the vendor to identify its devices. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9651): em28xx: Improve audio handlingMauro Carvalho Chehab3-117/+226
This patch properly implements audio handling on em28xx. Before this patch, it was assumed that every device has an Empia 202 audio chip. However, this is not true. After this patch, specific AC97 chipset setup and configurations can be done. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9650): em28xx: replace magic numbers to something more meaningfulMauro Carvalho Chehab1-126/+126
audio mux entries were described by 0 and 1 magic numers. Use an enum alias for each entry type. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9649): em28xx: remove two amux entries used only on one cardMauro Carvalho Chehab1-2/+2
This patch parepares for an audio refactor patch that auto-detects ac97 chips. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9648): em28xx: get audio config from em28xx registerDevin Heitmueller3-1/+52
Make use of the em28xx chip configuration register to determine whether we have AC97 audio, I2S audio, or no audio support at all. Thanks for Ray Lu from Empia for providing the em2860/em2880 datasheet. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9644): em28xx: add em2750 to the list of known em28xx chip idsDevin Heitmueller2-0/+4
Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9643): em28xx: remove the previous register namesMauro Carvalho Chehab2-9/+4
Previously, AC97 registers were named as if they were part of em28xx device, generating some confusion. Replace such names for a more general naming convention. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9642): Add AC97 registers found on em28xx devicesMauro Carvalho Chehab1-0/+52
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9641): Add chip ID's for em2820 and em2840Mauro Carvalho Chehab2-0/+8
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9638): drivers/media: use ARRAY_SIZEJulia Lawall5-8/+8
ARRAY_SIZE is more concise to use when the size of an array is divided by the size of its type or the size of its first element. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @i@ @@ @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(E[...])) + ARRAY_SIZE(E) @depends on i using "paren.iso"@ type T; T[] E; @@ - (sizeof(E)/sizeof(T)) + ARRAY_SIZE(E) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9637): usb vendor_ids/product_ids are __le16Harvey Harrison1-6/+6
Noticed by sparse: drivers/media/dvb/dvb-usb/af9015.c:756:25: warning: restricted __le16 degrades to integer drivers/media/dvb/dvb-usb/af9015.c:744:28: warning: restricted __le16 degrades to integer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9636): dvb: cinergyt2 annotate struct endianness, remove unused ↵Harvey Harrison2-7/+6
variable, add static All noticed by sparse: drivers/media/dvb/dvb-usb/cinergyT2-core.c:35:5: warning: symbol 'disable_remote' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-core.c:48:23: warning: symbol 'cinergyt2_usb_device' was not declared. Should it be static? drivers/media/dvb/dvb-usb/cinergyT2-fe.c:160:15: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:190:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:208:9: warning: cast to restricted __le32 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:227:24: warning: cast to restricted __le16 drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: expected unsigned short [unsigned] [assigned] [usertype] tps drivers/media/dvb/dvb-usb/cinergyT2-fe.c:275:12: got restricted __le16 [usertype] <noident> drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: warning: incorrect type in assignment (different base types) drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: expected unsigned int [unsigned] [assigned] [usertype] freq drivers/media/dvb/dvb-usb/cinergyT2-fe.c:276:13: got restricted __le32 [usertype] <noident> Cc: Thierry Merle <thierry.merle@free.fr> Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9633): Put s5h1411 into low power mode at end of attach() callDevin Heitmueller1-0/+3
Place the s5h1411 into low power mode until first use (to handle the case where the user plugs in the device and then doesn't use it for a while). On the Pinnacle 801e, this brings the power usage from 126ma down to 82ma. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9630): Some boards need to specify tuner addressMauro Carvalho Chehab2-0/+2
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9629): Add support for the ATI TV Wonder HD 600 USB Remote ControlDevin Heitmueller3-0/+34
Add support for the ATI TV Wonder HD 600 USB Remote Control (required a new keymap) [mchehab@redhat.com: Fix CodingStyle] Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9628): em28xx: refactor IR supportDevin Heitmueller4-71/+147
Refactor the em28xx IR support based on the em2860/em2880 and em2874 datasheets. Tested on the HVR-950 (em2883), Pinnacle 800e (em2883), Pinnacle 80e (em2874) using the remote controls that came with those products. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9612): Fix key repetition with HVR-950 IRMauro Carvalho Chehab1-4/+17
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9611): em28xx: experimental support for HVR-950 IRMauro Carvalho Chehab1-4/+9
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9607): em28xx: Properly implement poll support for IR'sMauro Carvalho Chehab5-15/+237
The first em28xx were based on i2c IR's. However, some newer designs are coming with a polling-based IR. Those are done by reading a register set at em28xx. This patch adds core polling support for those devices. Later patches will add support for some device-specific IR's. This patch adds the same basic IR polling code used by bttv, cx88 and saa7134, and shares the common getkey masks defined at ir-common. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9591): v4l core: fix debug printk for enumberating frameratesMauro Carvalho Chehab1-3/+7
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9590): Add registration for Pinnacle 80e ATSC tunerDevin Heitmueller3-0/+36
Add registration for Pinnacle 80e ATSC tuner Register the em2874 based Pinnacle 80e device. Note that support for this device also requires the new drx-j driver (which is not available yet) Thanks for Ray Lu from Empia for providing the em2874 datasheet. Thanks to Joerg Schindler from Pinnacle for providing sample hardware. Thanks to Rainer Miethling from Pinnacle for providing engineering support. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9589): Properly support capture start on em2874Devin Heitmueller2-0/+27
Properly support capture start on em2874 The transport stream enable register moved in the em2874, so make it work properly. Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9588): Don't load em28xx audio module for digital-only devicesDevin Heitmueller3-8/+32
Rework the logic so that the em28xx-alsa module does not get loaded for devices that don't support analog audio (such as the em2874) Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9587): Handle changes to endpoint layout in em2874Devin Heitmueller1-13/+23
Empia moved around their endpoint configuration in newer chips, so accommodate the changes Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9586): Fix possible null pointer dereference in info messageDevin Heitmueller1-2/+4
Fix case where we could end up dereferencing a NULL pointer if dev->vdev or dev->vbi_dev were not set properly. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9585): Skip reading eeprom in newer Empia devicesDevin Heitmueller1-0/+11
Empia switched to a 16-bit addressable eeprom in newer devices. While we could certainly write a routine to read the eeprom, there is nothing of use in there that cannot be accessed through registers, and there is the risk that we could corrupt the eeprom (since a 16-bit read call is interpreted as a write call by 8-bit eeproms). So just be safe and bail out of the function. Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9584): Support different GPIO/GPO registers for newer devicesDevin Heitmueller4-7/+22
Empia moved the location of the GPIO/GPO registers in newer devices. Add the ability to specify the relocated registers (including caching of register contents). Thanks for Ray Lu from Empia for providing the em2874 datasheet. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9583): Remember chip id of devices at initializationDevin Heitmueller2-0/+2
When setting up the device, remember the chip id, so we can control behavior in the future without having to read the register continuously. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9582): Add a EM28XX_NODECODER option to the list of available decodersDevin Heitmueller1-0/+1
Add a EM28XX_NODECODER option to the list of available decoders. This option becomes important for devices that do not have analog support. Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9581): Remove unused variable from em28xx-audio.cDevin Heitmueller1-1/+1
Remove unused variable from em28xx-audio.c Fix warning for unused "ret" variable Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9580): Add chip id for em2874 to list of known chipsDevin Heitmueller2-0/+5
Add em2874 chip id Add chip id for em2874 to list of known chips Signed-off-by: Devin Heitmueller <devin.heitmueller@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9579): v4l core: a few get ioctls were lacking memory cleanMauro Carvalho Chehab1-0/+15
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9578): v4l core: add support for enumerating frame sizes and intervalsMauro Carvalho Chehab2-0/+73
video_ioctl2 lacks implementation of those two ioctls: - VIDIOC_ENUM_FRAMESIZES and VIDIOC_ENUM_FRAMEINTERVALS Adds implementation for those. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9577): saa7134-dvb: MFE attachment clean-up for saa-7134 dvbDarron Broad1-17/+7
This cleans-up MFE attachment for saa-7134 dvb devices. note: MFE is not fully implemented here yet. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9576): cx88-dvb: MFE attachment clean-up for HVR-3000/4000Darron Broad1-61/+57
This cleans-up MFE attachment for these cards plus two cases of potential memory leak on attachment failure. Signed-off-by: Darron Broad <darron@kewl.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9572a): Whitespace cleanupMauro Carvalho Chehab1-2/+2
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9570): uvcvideo: Handle failed video GET_{MIN|MAX|DEF} requests ↵Laurent Pinchart4-141/+66
more gracefully Failed requests will now generate a one-time warning message instead of the usual "Failed to query..." error, which should be more user-friendly. The driver will also recover automatically from failed GET_MIN/GET_MAX requests when the device is half-broken without requiring the MINMAX quirk (fully broken devices still need the quirk). Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9563): gspca: Let gspca handle the webcam 0471:0328 instead of sn9c102.Jean-Francois Moine2-1/+3
According to http://bugzilla.kernel.org/show_bug.cgi?id=11997, the driver sn9c102 does not work for this webcam. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9560): gspca: Let gspca handle the webcam 0c45:602c instead of sn9c102.Jean-Francois Moine2-1/+3
According to http://bugzilla.kernel.org/show_bug.cgi?id=11920, the driver sn9c102 does not work for this webcam. Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9548): gspca: Fix Kconfig CodingStyleFrederic Cand1-71/+71
Signed-off-by: Frederic Cand <frederic.cand@anevia.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9540): dsbr100: add disabled controls and fix versionAlexey Klimov1-3/+23
Patch adds disabled controls in v4l2_queryctrl struct. Also version of driver corrected. -- Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9539): dsbr100: add suspend and resumeAlexey Klimov1-4/+41
This patch adds support for suspend and resume methods in driver. Without this kradio and gnomeradio crashes during resume. Also .supports_autosuspend in usb_driver struct set equal to 0 to avoid suspending of module if usb_autosuspend enabled. Signed-off-by: Alexey Klimov <klimov.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9572): Whitespace cleanupMauro Carvalho Chehab1-5/+5
Some recent patches added a few bad whitespaces. Remove that. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9569): uvcvideo: Sort the frame descriptors during parsingLaurent Pinchart1-3/+22
The UVC specification does not require frame descriptors to be sorted by bFrameIndex. At least one camera (145f:013e) is known not to sort the descriptors properly, so they need to be sorted during parsing as the driver then accesses them by index. Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-29V4L/DVB (9568): uvcvideo: Add support for Lenovo Thinkpad SL500 integrated ↵Laurent Pinchart1-0/+9
webcam Signed-off-by: Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-30 17:46:08 +0300