summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-12-23Merge tag 'samsung-cleanup' of ↵Olof Johansson9-26/+16
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/cleanup From Kukjin Kim: Samsung cleanup for v3.14 - remove unused SAMSUNG_GPIOLIB_4BIT and IRQF_DISABLED - constify immutable PMU data table and PM clksrc register - make const struct for sleep_save * tag 'samsung-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: EXYNOS: Constify clksrc immutable register restore tables ARM: SAMSUNG: Let s3c_pm_do_restore_*() take const sleep_save ARM: EXYNOS: Constify data tables for pmu ARM: SAMSUNG: remove IRQF_DISABLED ARM: SAMSUNG: remove unused SAMSUNG_GPIOLIB_4BIT Kconfig parameter Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-22Merge tag 'zynq-cleanup-for-3.14' of git://git.xilinx.com/linux-xlnx into ↵Olof Johansson4-22/+27
next/cleanup From Michal Simek: ARM: Xilinx Zynq cleanup patches for v3.14 This branch contains these fixes: - SMP cleanups - platform initialization cleanup * tag 'zynq-cleanup-for-3.14' of git://git.xilinx.com/linux-xlnx: ARM: zynq: remove unnecessary setting of cpu_present_mask arm: zynq: Set proper GIC flags arm: zynq: Use of_platform_populate instead of bus_probe arm: zynq: Add support for zynq_cpu_kill function arm: zynq: Invalidate L1 in secondary boot arm: zynq: platsmp: Remove CPU presence check Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-12ARM: at91: remove AT91_PROGRAMMABLE_CLOCKS configuration optionNicolas Ferre14-29/+2
This AT91 specific Kconfig option removed the code that dealt with programmable clocks. Each AT91 SoC embeds programmable clocks and there is little gain to remove this code in case that such a clock is not used. If this option is not selected, it causes certain drivers to fail to build. We simply remove this option instead of adding code just to build a workaround. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
2013-12-12ARM: mmp: build sram driver aloneQiao Zhou3-1/+7
sram driver can be used by many chips besides CPU_MMP2, and so build it alone. Also need to select MMP_SRAM for MMP_TDMA driver. Reported-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Qiao Zhou <zhouqiao@marvell.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-12ARM: pxa: Remove unused variablesThierry Reding1-4/+0
The conf and of_id variables are assigned but never used, so they may as well just be removed. Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Acked-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-12ARM: pxa: remove IRQF_DISABLEDMichael Opdenacker10-17/+13
This flag is a NOOP since 2.6.35 and can be removed. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Acked-by: Eric Miao <eric.y.miao@gmail.com> Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> [olof: Fixed compilation failure for pcm990-baseboard] Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-12ARM: clean up cache handling in platform codeNicolas Pitre7-14/+7
We have a handy macro to replace open coded __cpuc_flush_dcache_area(() and outer_clean_range() sequences. Let's use it. No functional change. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-12ARM: at91: remove redundant dependencyYanis Moreno1-1/+0
This removes the "depends on SOC_SAM_V7" statement in a Kconfig section that's under an "if SOC_SAM_V7" condition (same parameter). Signed-off-by: Yanis Moreno <yanis.moreno63@gmail.com> Reviewed-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-12ARM: EXYNOS: Constify clksrc immutable register restore tablesDaniel Kurtz1-2/+2
The clksrc tables are constant, they are not used to store register values at suspend. size arch/arm/mach-exynos/pm.o text data bss 1591 212 12 // Before 1671 132 12 // After Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-12ARM: SAMSUNG: Let s3c_pm_do_restore_*() take const sleep_saveDaniel Kurtz2-4/+4
The restore functions do not modify the passed in struct sleep_save, so that parameter can be const. This allows us to pass in const struct. This allows us to use const structs sleep_save to define system registers that will always be restored to a constant value. Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-12ARM: EXYNOS: Constify data tables for pmuDaniel Kurtz1-7/+7
These tables are all immutable, make them const to save 4416 bytes of RAM. size arch/arm/mach-exynos/pmu.o text data bss 848 4420 4 // before 5264 4 4 // after Signed-off-by: Daniel Kurtz <djkurtz@chromium.org> Reviewed-by: Tomasz Figa <t.figa@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-12ARM: SAMSUNG: remove IRQF_DISABLEDMichael Opdenacker3-4/+3
This patch proposes to remove the use of the IRQF_DISABLED flag. It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-12ARM: SAMSUNG: remove unused SAMSUNG_GPIOLIB_4BIT Kconfig parameterMichael Opdenacker2-9/+0
This removes the SAMSUNG_GPIOLIB_4BIT Kconfig parameter, which was no longer used anywhere in the source code and Makefiles. Signed-off-by: Michael Opdenacker <michael.opdenacker@free-electrons.com> Reviewed-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-12-10ARM: zynq: remove unnecessary setting of cpu_present_maskSudeep KarkadaNagesha1-9/+0
This patch also removes setting cpu_present_mask as platforms should only re-initialize it in smp_prepare_cpus() if present != possible. Cc: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-12-10arm: zynq: Set proper GIC flagsSoren Brinkmann1-0/+9
Zynq is able to wake up on any IRQ, so flag it with IRQCHIP_SKIP_SET_WAKE, and we want to mask off the IRQs when going to suspend to avoid transient effects so also flag this with IRQCHIP_MASK_ON_SUSPEND. This is essentially, making the same changes as commit 'ARM: ux500: set proper GIC flags' (sha1: 7e1f97ea8ffa66679252520dbbbd6ec413ecae68) for Zynq. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-12-10arm: zynq: Use of_platform_populate instead of bus_probeSoren Brinkmann1-6/+1
All new boards should be using this function instead of of_platform_bus_probe. Two side effects: 1. Possible to probe node which are not in the bus 2. Remove bus_id table from platform code Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-12-10arm: zynq: Add support for zynq_cpu_kill functionMichal Simek1-0/+9
Use simple hook to slcr to stop cpu. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-12-10arm: zynq: Invalidate L1 in secondary bootSoren Brinkmann3-2/+8
During boot, Linux initiates a clean-invalidate operation only, resulting in faulty data to be written to the memory system during resume. Therefore invalidate the L1 in the secondary boot path to avoid these issues. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-12-10arm: zynq: platsmp: Remove CPU presence checkSoren Brinkmann1-5/+0
The generic code already checks that the CPU being requested is legal if the cpu possible/present masks are set correctly. Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-12-05Merge tag 'at91-cleanup' of git://github.com/at91linux/linux-at91 into ↵Olof Johansson46-375/+4237
next/cleanup From Nicolas Ferre: AT91: Move to Common Clock Framework and sama5d3 implementation This is the first step to move AT91 to the CCF. - core CCF and drivers for most of the clocks - use of CCF for sama5d3 (100% DT-based) * tag 'at91-cleanup' of git://github.com/at91linux/linux-at91: (22 commits) ARM: at91/dt: remove old clk material ARM: at91: move sama5d3 SoC to common clk ARM: at91/dt: define sama5d3xek's main clk frequency ARM: at91/dt: define sama5d3 clocks ARM: at91: prepare common clk transition for sama5d3 SoC ARM: at91: prepare sama5 dt boards transition to common clk ARM: at91: add new compatible strings for pmc driver ARM: at91: move pit timer to common clk framework dt: binding: add at91 clks dt bindings documentation clk: at91: add PMC smd clock clk: at91: add PMC usb clock clk: at91: add PMC utmi clock clk: at91: add PMC programmable clocks clk: at91: add PMC peripheral clocks clk: at91: add PMC system clocks clk: at91: add PMC master clock clk: at91: add PMC pll clocks clk: at91: add PMC main clock clk: at91: add PMC macro file for dt definitions clk: at91: add PMC base support ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-05Merge commit 'fixes' into next/cleanupOlof Johansson32-114/+575
Merging in post-rc1 fixes that have gone into rc2/3 to avoid later conflicts. * commit 'fixes': (39 commits) arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk arm: socfpga: Enable ARM_TWD for socfpga ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16 ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot support ARM: multi_v7_defconfig: enable network for BeagleBone Black ARM: dts: Fix the name of supplies for smsc911x shared by OMAP ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm ARM: dts: omap3-beagle: Add omap-twl4030 audio support ARM: dts: omap4-sdp: Fix pin muxing for wl12xx ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM ARM: at91: add usart3 alias to dtsi ARM: at91: sama5d3: reduce TWI internal clock frequency mmc: omap: Fix I2C dependency and make driver usable with device tree mmc: omap: Fix DMA configuration to not rely on device id ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi ARM: dts: AM33XX IGEP0033: add USB support ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support ARM: dts: AM33XX BASE0033: add pinmux and user led support ... Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04Merge tag 'mvebu-soc-3.14' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson20-74/+36
next/cleanup From Jason Cooper: mvebu soc changes for v3.14 - orion: - remove IRQF_DISABLED - directly include some .h files - mvebu: - remove some sparse warnings - orion5x: - include cleanup - warning removal for C=1 - kirkwood: - remove legacy clock workarounds - stop rpinting a TCLK value of 0 for DT boards - dove: - warning removal for C=1 * tag 'mvebu-soc-3.14' of git://git.infradead.org/linux-mvebu: ARM: mvebu: fix some sparse warnings ARM: kirkwood: stop printk TCLK value at boot for DT boards ARM: orion5x: drop unused include from common.c ARM: Dove: Fix compiler warnings with C=1 builds ARM: Orion5x: Fix warnings when using C=1. ARM: Orion: Add missing includes ARM: kirkwood: remove lagacy clk workarounds arm: plat-orion: remove deprecated IRQF_DISABLED Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04Merge tag 'renesas-cleanup-for-v3.14' of ↵Olof Johansson13-93/+59
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup From Simon Horman: Renesas ARM based SoC cleanups for v3.14 * Tidy up clock table order for r7s72100, r8a7779, r8a7779, r8a7790, sh7372 and sh73a0 SoCs. * Tidy up camera-rcar header for r8a7779 SoC * Tidy up registration of VIN on r8a7779 SoC * Tidy up PFC registration on r8a7790 SoC * Correct typo in clocks for r8a7790 SoC * Don't use named resources for IPMMU, I2C and TMU on sh73a0 SoC * Don't use named resources for MMCIF and SDHI on ape6evm board * Don't use named resources for MMCIF on lager board * Tidy up device registration on lager board * Tidy up headers for bockw board * tag 'renesas-cleanup-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh7372: tidyup clock table order ARM: shmobile: r7s72100: tidyup clock table order ARM: shmobile: sh73a0: tidyup clock table order ARM: shmobile: r8a7779: cleanup registration of sh_eth ARM: shmobile: r8a7790: Correct typo in clocks ARM: shmobile: r8a7779: camera-rcar header cleanup ARM: shmobile: Add r8a7790_register_pfc() function ARM: shmobile: Cosmetic update of Lager DT Reference ARM: shmobile: r8a7779: cleanup registration of VIN ARM: shmobile: bockw: header cleanup ARM: shmobile: sh73a0: don't use named resource for IPMMU ARM: shmobile: sh73a0: don't use named resource for I2C ARM: shmobile: sh73a0: don't use named resource for TMU ARM: shmobile: lager: don't use named resource for MMCIF ARM: shmobile: ape6evm: don't use named resource for SDHI ARM: shmobile: ape6evm: don't use named resource for MMCIF Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04arm: dts: socfpga: Change some clocks of gate-clk type to perip-clkDinh Nguyen1-3/+4
Some of the clocks that were designated gate-clk do not have a gate, so change those clocks to be of periph-clk type. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04arm: socfpga: Enable ARM_TWD for socfpgaDinh Nguyen1-0/+1
Update Kconfig to enable TWD. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04ARM: multi_v7_defconfig: enable SDHCI_BCM_KONA and MMC_BLOCK_MINORS=16Olof Johansson1-0/+2
Enable MMC/SD on the Broadcom mobile platforms, and increase the block minors from the default 8 to 16 (since the Broadcom board by default has root on the 8th partition). Signed-off-by: Olof Johansson <olof@lixom.net> Cc: stable@vger.kernel.org # v3.12
2013-12-04ARM: sunxi_defconfig: enable NFS, TMPFS, PRINTK_TIME and nfsroot supportOlof Johansson1-0/+7
This enables a few more options on the sunxi defconfigs such that I can use nfsroot to boot them (there is no local storage support yet). It also enables PRINTK_TIME and tmpfs since it's a common distro requirement. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-04Merge tag 'omap-for-v3.13/more-dt-regressions' of ↵Olof Johansson5-19/+34
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Few more legacy booting vs device tree booting fixes that people have noticed while booting things with device tree for things like omap4 WLAN, smsc911x, and beagle audio. Hopefully this will be it for the legacy booting vs device tree fixes for this -rc cycle. * tag 'omap-for-v3.13/more-dt-regressions' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Fix the name of supplies for smsc911x shared by OMAP ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdm ARM: dts: omap3-beagle: Add omap-twl4030 audio support ARM: dts: omap4-sdp: Fix pin muxing for wl12xx ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
2013-12-04ARM: multi_v7_defconfig: enable network for BeagleBone BlackOlof Johansson1-0/+1
BeagleBone Black uses the TI CPSW ethernet controller, enable it in the multi_v7_defconfig for testing coverage purposes. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Tony Lindgren <tony@atomide.com> Cc: stable@vger.kernel.org # v3.12
2013-12-04Merge tag 'at91-fixes' of git://github.com/at91linux/linux-at91 into fixesOlof Johansson3-3/+11
From Nicolas Ferre: AT91: second round of fixes for 3.13 - reduce IP frequency for I2C on sama5d3 - missing aliases directive for USART3 on 9x5 family - a PM symbol is missing if !CONFIG_PM * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91: fixed unresolved symbol "at91_pm_set_standby" when built without CONFIG_PM ARM: at91: add usart3 alias to dtsi ARM: at91: sama5d3: reduce TWI internal clock frequency
2013-12-04Merge tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson4-51/+112
fixes From Jason Cooper, mvebu DT fixes for v3.13: - mvebu - PCIe fixes now that we have test devices with more ports. - fix access to coherency registers * tag 'mvebu-dt-fixes-3.13' of git://git.infradead.org/linux-mvebu: ARM: mvebu: re-enable PCIe on Armada 370 DB ARM: mvebu: use the virtual CPU registers to access coherency registers ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260 ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable
2013-12-04Merge tag 'omap-for-v3.13/fixes-against-rc1-take2' of ↵Olof Johansson15-38/+396
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes From Tony Lindgren: Some omap related fixes that have come up with people moving to device tree only based booting for omap2+. The series contains a handful of fixes for the igep boards as they were one of the first omap3 boards to jump over completely to device tree based booting. So these can be considered regressions compared to booting igep in legacy mode with board files in v3.12. Also included are few other device tree vs legacy booting regressions: - yet more missing omap3 .dtsi entries that have showed up booting various boards with device tree only - n900 eMMC device tree fix - fixes for beagle USB EHCI - two fixes to make omap2420 MMC work As we're moving omap2+ to be device tree only for v3.14, I'd like to have v3.13 work equally well for legacy based booting and device tree based booting. So there will be likely few more device tree related booting patches trickling in. This series also includes a regression fix for the omap timer posted mode that may wrongly stay on from the bootloader for some SoCs. * tag 'omap-for-v3.13/fixes-against-rc1-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: mmc: omap: Fix I2C dependency and make driver usable with device tree mmc: omap: Fix DMA configuration to not rely on device id ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13) ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi ARM: dts: AM33XX IGEP0033: add USB support ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support ARM: dts: AM33XX BASE0033: add pinmux and user led support ARM: dts: AM33XX BASE0033: add pinmux and hdmi node to enable display ARM: dts: omap3-igep0020: Add pinmuxing for DVI output ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor ARM: dts: omap3-igep: Add support for LBEE1USJYC WiFi connected to SDIO ARM: dts: omap3-igep: Fix bus-width for mmc1 ARM: OMAP2+: dss-common: change IGEP's DVI DDC i2c bus ARM: OMAP2+: Disable POSTED mode for errata i103 and i767 ARM: OMAP2+: Fix eMMC on n900 with device tree ARM: OMAP2+: Add fixed regulator to omap2plus_defconfig ARM: OMAP2+: Fix more missing data for omap3.dtsi file Signed-off-by: Olof Johansson <olof@lixom.net>
2013-12-02ARM: dts: Fix the name of supplies for smsc911x shared by OMAPFlorian Vaussard1-2/+2
drivers/net/ethernet/smsc/smsc911x.c is expecting supplies named "vdd33a" and "vddvario". Currently the shared DTS file provides "vmmc" and "vmmc_aux", and the supply lookup will fail: smsc911x 2c000000.ethernet: Looking up vdd33a-supply from device tree smsc911x 2c000000.ethernet: Looking up vdd33a-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed smsc911x 2c000000.ethernet: Looking up vddvario-supply from device tree smsc911x 2c000000.ethernet: Looking up vddvario-supply property in node /ocp/gpmc@6e000000/ethernet@gpmc failed Fix it! Looks like commmit 6b2978ac40e4 (ARM: dts: Shared file for omap GPMC connected smsc911x) made the problem more visible by moving the smc911x configuration from the omap3-igep0020.dts file to the generic file. But it seems we've had this problem since commit d72b4415011e (ARM: dts: omap3-igep0020: Add SMSC911x LAN chip support). Tested on OMAP3 Overo platform. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> [tony@atomide.com: updated comments for the commits causing the problem] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02ARM: OMAP2+: Powerdomain: Fix unchecked dereference of arch_pwrdmRajendra Nayak1-1/+2
Commit 'cd8abed' "ARM: OMAP2+: Powerdomain: Remove the need to always have a voltdm associated to a pwrdm" leads to the following Smatch complaint: arch/arm/mach-omap2/powerdomain.c:131 _pwrdm_register() error: we previously assumed 'arch_pwrdm' could be null (see line 105) So, fix the unchecked dereference of arch_pwrdm. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02ARM: dts: omap3-beagle: Add omap-twl4030 audio supportJarkko Nikula1-0/+14
This adds typical McBSP2-TWL4030 audio description to the legacy Beagle Board. Signed-off-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02ARM: dts: omap4-sdp: Fix pin muxing for wl12xxBalaji T K1-6/+6
Mux mode for wlan/sdmmc5 should be MODE0 in pinmux_wl12xx_pins and Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes WLAN on omap4-sdp that got broken in v3.10 when we moved omap4 to boot using device tree only as I did not have the WL12XX card in my omap4 SDP to test with. The commit that attempted to make WL12XX working on omap4 SDP was 775d2418f309 (ARM: dts: Fix muxing and regulator for wl12xx on the SDIO bus for blaze). Signed-off-by: Balaji T K <balajitk@ti.com> [tony@atomide.com: updated comments for the regression] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02ARM: dts: omap4-panda-common: Fix pin muxing for wl12xxBalaji T K1-10/+10
pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. Fix the following error message: pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x SDIO card is not detected after moving pin mux to omap4_pmx_core since sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes a regression where WLAN did not work after a warm reset or after one up/down cycle that happened when we move omap4 to boot using device tree only. For reference, the kernel bug is described at: https://bugzilla.kernel.org/show_bug.cgi?id=63821 Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Balaji T K <balajitk@ti.com> [tony@atomide.com: update comments to describe the regression] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-12-02ARM: at91/dt: remove old clk materialBoris BREZILLON2-357/+0
This patch removes the old main clk node which is now useless as sama5d3 SoCs and boards are no longer compatible with the old at91 clk implementations. It also remove old clock definitions (clock definitions using at91 old clk framework). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02ARM: at91: move sama5d3 SoC to common clkBoris BREZILLON1-1/+0
This patch removes the selection of AT91_USE_OLD_CLK when selecting sama5d3 SoC support. This will enable automatically enable COMMON_CLK_AT91 option and add support for at91 common clk implementation. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02ARM: at91/dt: define sama5d3xek's main clk frequencyBoris BREZILLON1-0/+6
Define the main clock frequency for the new main clock node in sama5d3xcm.dtsi. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02ARM: at91/dt: define sama5d3 clocksBoris BREZILLON8-1/+482
Define sama5d3 clocks in sama5d3 device tree. Add references to the appropriate clocks in each peripheral. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02ARM: at91: prepare common clk transition for sama5d3 SoCBoris BREZILLON1-1/+5
This patch encloses sama5d3 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02ARM: at91: prepare sama5 dt boards transition to common clkBoris BREZILLON1-1/+9
This patch prepare the transition to common clk for sama5 dt boards by replacing the timer init callback. Clocks registration cannot be done in early init callback (as formerly done by the old clk implementation) because it requires dynamic allocation which is not ready yet during early init. In the other hand, at91 clocks must be registered before at91sam926x_pit_init is called because PIT (Periodic Interval Timer) driver request the master clk (mck). A new function (at91sama5_dt_timer_init) is created to fullfil these needs. This function registers all at91 clks using the dt definition before calling the PIT init function. The device tree clock registration is enabled only if common clk is selected. Else the old clk registration is been done during at91_dt_initialize call. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02ARM: at91: add new compatible strings for pmc driverBoris BREZILLON1-0/+5
This patch adds new compatible string for PMC node to prepare the transition to common clk. These compatible string come from pmc driver in clk subsystem and are needed to provide new device tree compatibility with old at91 clks (device tree using common clks will use the new compatible strings). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02ARM: at91: move pit timer to common clk frameworkBoris BREZILLON1-1/+13
Use device tree to get the source clock of the PIT (Periodic Interval Timer). If the clock is not found in device tree (or dt is not enabled) we'll try to get it using clk_lookup definitions. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02dt: binding: add at91 clks dt bindings documentationBoris BREZILLON1-0/+339
This patch adds new at91 clks dt bindings documentation. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC smd clockBoris BREZILLON5-0/+189
This patch adds at91 smd (Soft Modem) clock implementation using common clk framework. Not used by any driver right now. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC usb clockBoris BREZILLON5-0/+434
This patch adds new at91 usb clock implementation using common clk framework. This clock is used to clock usb ports (ohci, ehci and udc). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC utmi clockBoris BREZILLON5-0/+179
This adds new at91 utmi clock implementation using common clk framework. This clock is a pll with a fixed factor (x40). It is used as a source for usb clock. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2013-12-02clk: at91: add PMC programmable clocksBoris BREZILLON4-0/+392
This patch adds new at91 programmable clocks implementation using common clk framework. A programmable clock is a clock which can be exported on a given pin to clock external devices. Each programmable clock is given an id (from 0 to 8). The number of available programmable clocks depends on the SoC you're using. Programmable clock driver only implements the clock setting (clock rate and parent setting). It must be chained to a system clock in order to enable/disable the generated clock. The PCKX pins used to output the clock signals must be assigned to the appropriate peripheral (see atmel's datasheets). Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-12 19:15:10 +0300