| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull pci fix from Bjorn Helgaas:
"Revert a commit that reduced the number of IRQs used but resulted in
interrupt storms (Bjorn Helgaas)"
* tag 'pci-v5.17-fixes-4' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI/portdrv: Do not setup up IRQs if there are no users"
|
|
This reverts commit 0e8ae5a6ff5952253cd7cc0260df838ab4c21009.
0e8ae5a6ff59 ("PCI/portdrv: Do not setup up IRQs if there are no users")
reduced usage of IRQs when we don't think we need them. But Joey, Sergiu,
and David reported choppy GUI rendering, systems that became unresponsive
every few seconds, incorrect values reported by cpufreq, and high IRQ 16
CPU usage.
Joey bisected the issues to 0e8ae5a6ff59, so revert it until we figure out
a better solution.
Link: https://lore.kernel.org/r/20220210222717.GA658201@bhelgaas
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215533
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215546
Reported-by: Joey Corleone <joey.corleone@mail.ru>
Reported-by: Sergiu Deitsch <sergiu.deitsch@gmail.com>
Reported-by: David Spencer <dspencer577@gmail.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org # v5.16+
Cc: Jan Kiszka <jan.kiszka@siemens.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid undefined behavior when stack backtracing, which
manifests in GCC as incorrect stack addresses
- A few fixes for the XIP kernels
- A fix to tracking NUMA state on CPU hotplug
- Support for the recently relesaed binutils-2.38, which changed the
default ISA version to one without CSRs or fence.i in 'I' extension
* tag 'riscv-for-linus-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix build with binutils 2.38
riscv: cpu-hotplug: clear cpu from numa map when teardown
riscv: extable: fix err reg writing in dedicated uaccess handler
riscv/mm: Add XIP_FIXUP for riscv_pfn_base
riscv/mm: Add XIP_FIXUP for phys_ram_base
riscv: Fix XIP_FIXUP_FLASH_OFFSET
riscv: eliminate unreliable __builtin_frame_address(1)
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Enable Cortex-A510 erratum 2051678 by default as we do with other
errata.
- arm64 IORT: Check the node revision for PMCG resources to cope with
old firmware based on a broken revision of the spec that had no way
to describe the second register page (when an implementation is using
the recommended RELOC_CTRS feature).
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
ACPI/IORT: Check node revision for PMCG resources
arm64: Enable Cortex-A510 erratum 2051678 by default
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fixes from Rafael Wysocki:
"These revert two commits that turned out to be problematic and fix two
issues related to wakeup from suspend-to-idle on x86.
Specifics:
- Revert a recent change that attempted to avoid issues with
conflicting address ranges during PCI initialization, because it
turned out to introduce a regression (Hans de Goede).
- Revert a change that limited EC GPE wakeups from suspend-to-idle to
systems based on Intel hardware, because it turned out that systems
based on hardware from other vendors depended on that functionality
too (Mario Limonciello).
- Fix two issues related to the handling of wakeup interrupts and
wakeup events signaled through the EC GPE during suspend-to-idle on
x86 (Rafael Wysocki)"
* tag 'acpi-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
PM: s2idle: ACPI: Fix wakeup interrupts handling
ACPI: PM: s2idle: Cancel wakeup before dispatching EC GPE
ACPI: PM: Revert "Only mark EC GPE for wakeup on Intel systems"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 fixes from Andreas Gruenbacher:
- Revert debug commit that causes unexpected data corruption
- Fix muti-block reservation regression
* tag 'gfs2-v5.16-rc3-fixes2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Fix gfs2_release for non-writers regression
Revert "gfs2: check context in gfs2_glock_put"
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request
- nvme-tcp: fix bogus request completion when failing to send AER
(Sagi Grimberg)
- add the missing nvme_complete_req tracepoint for batched
completion (Bean Huo)
- Revert of the loop async autoclear issue that has continued to plague
us this release. A few patchsets exists to improve this, but they are
too invasive to be considered at this point (Tetsuo)
* tag 'block-5.17-2022-02-11' of git://git.kernel.dk/linux-block:
loop: revert "make autoclear operation asynchronous"
nvme-tcp: fix bogus request completion when failing to send AER
nvme: add nvme_complete_req tracepoint for batched completion
|
|
Pull io_uring fixes from Jens Axboe:
- Fix a false-positive warning from an older gcc (Alviro)
- Allow oom killer invocations from io_uring_setup (Shakeel)
* tag 'io_uring-5.17-2022-02-11' of git://git.kernel.dk/linux-block:
mm: io_uring: allow oom-killer from io_uring_setup
io_uring: Clean up a false-positive warning from GCC 9.3.0
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- use sleeping variants of GPIO accessors where needed
in gpio-aggregator
- never return kernel's internal error codes to user-space
in gpiolib core
- use the correct register for reading output values in
gpio-sifive
- fix line hogging in gpio-sim
* tag 'gpio-fixes-for-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: sim: fix hogs with custom chip labels
gpio: sifive: use the correct register to read output values
gpiolib: Never return internal error codes to user space
gpio: aggregator: Fix calling into sleeping GPIO controllers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
"A couple of additional fixes for 5.17-rc4:
- Fix compilation warnings in the sata_fsl driver (powerpc) (me)
- Disable TRIM commands on M88V29 devices as these commands are
failing despite the device reporting it supports TRIM (Zoltan)"
* tag 'ata-5.17-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-core: Disable TRIM on M88V29
ata: sata_fsl: fix sscanf() and sysfs_emit() format strings
|
|
Pull drm fixes from Dave Airlie:
"Regular fixes pull, mostly i915 and amd fixes, along with a
maintainers update for fbdev core.
Otherwise just some build fixes and vc4 HDMI fixes.
fbdev:
- MAINTAINERS: add Daniel as fbdev core module maintainer
- build warning fix
- implicit type cast fix
panel:
- simple: Fix assignments from panel_dpi_probe()
privacy-screen:
- fix docs warning
i915:
- non-x86 build fix
- ttm error propogation fix
- drrs on hsw/ivb disabled
- BIOS readout fixes
- missing stackdepot oops fix
amd:
- DCN 3.1 display fixes
- GC 10.3.1 harvest fix
- Page flip irq fix
- hwmon label fix
- DCN 2.0 display fix
rockchip:
- fix HDMI error cleanup
- fix RK3399 VOP register fields
vc4:
- HDMI fixes
- remove redundant code"
* tag 'drm-fixes-2022-02-11' of git://anongit.freedesktop.org/drm/drm: (25 commits)
drm/amdgpu/display: change pipe policy for DCN 2.0
drm/amd/pm: fix hwmon node of power1_label create issue
drm/amd/display: keep eDP Vdd on when eDP stream is already enabled
drm/amd/display: fix yellow carp wm clamping
drm/amd/display: Cap pflip irqs per max otg number
drm/amdgpu: add utcl2_harvest to gc 10.3.1
display/amd: decrease message verbosity about watermarks table failure
drm/rockchip: vop: Correct RK3399 VOP register fields
drm/rockchip: dw_hdmi: Do not leave clock enabled in error case
MAINTAINERS: Add entry for fbdev core
fbcon: Avoid 'cap' set but not used warning
drm/privacy-screen: Fix sphinx warning
drm/i915: Workaround broken BIOS DBUF configuration on TGL/RKL
drm/i915: Populate pipe dbuf slices more accurately during readout
drm/i915: Allow !join_mbus cases for adlp+ dbuf configuration
drm/i915: Fix header test for !CONFIG_X86
drm/i915/ttm: Return some errors instead of trying memcpy move
drm/i915: Disable DRRS on IVB/HSW port != A
drm/i915: Fix oops due to missing stack depot
drm/vc4: crtc: Fix redundant variable assignment
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fixes to the RTLA tooling
- A fix to a tp_printk overriding tp_printk_stop_on_boot on the
command line
* tag 'trace-v5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Fix tp_printk option related with tp_printk_stop_on_boot
MAINTAINERS: Add RTLA entry
rtla: Fix segmentation fault when failing to enable -t
rtla/trace: Error message fixup
rtla/utils: Fix session duration parsing
rtla: Follow kernel version
|
|
When a file is opened for writing, the vfs code (do_dentry_open)
calls get_write_access for the inode, thus incrementing the inode's write
count. That writer normally then creates a multi-block reservation for
the inode (i_res) that can be re-used by other writers, which speeds up
writes for applications that stupidly loop on open/write/close.
When the writes are all done, the multi-block reservation should be
deleted when the file is closed by the last "writer."
Commit 0ec9b9ea4f83 broke that concept when it moved the call to
gfs2_rs_delete before the check for FMODE_WRITE. Non-writers have no
business removing the multi-block reservations of writers. In fact, if
someone opens and closes the file for RO while a writer has a
multi-block reservation, the RO closer will delete the reservation
midway through the write, and this results in:
kernel BUG at fs/gfs2/rgrp.c:677! (or thereabouts) which is:
BUG_ON(rs->rs_requested); from function gfs2_rs_deltree.
This patch moves the check back inside the check for FMODE_WRITE.
Fixes: 0ec9b9ea4f83 ("gfs2: Check for active reservation in gfs2_release")
Cc: stable@vger.kernel.org # v5.12+
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
It turns out that the might_sleep() call that commit 660a6126f8c3 adds
is triggering occasional data corruption in testing. We're not sure
about the root cause yet, but since this commit was added as a debugging
aid only, revert it for now.
This reverts commit 660a6126f8c3208f6df8d552039cda078a8426d1.
Fixes: 660a6126f8c3 ("gfs2: check context in gfs2_glock_put")
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
|
|
Merge a revert of a problematic commit for 5.17-rc4.
* acpi-x86:
x86/PCI: revert "Ignore E820 reservations for bridge windows on newer systems"
|
|
The kernel test robot is reporting that xfstest which does
umount ext2 on xfs
umount xfs
sequence started failing, for commit 322c4293ecc58110 ("loop: make
autoclear operation asynchronous") removed a guarantee that fput() of
backing file is processed before lo_release() from close() returns to
user mode.
And syzbot is reporting that deferring destroy_workqueue() from
__loop_clr_fd() to a WQ context did not help [1]. Revert that commit.
Link: https://syzkaller.appspot.com/bug?extid=831661966588c802aae9 [1]
Reported-by: kernel test robot <oliver.sang@intel.com>
Acked-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reported-by: syzbot <syzbot+831661966588c802aae9@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Link: https://lore.kernel.org/r/20220211071554.3424-1-penguin-kernel@I-love.SAKURA.ne.jp
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.17-2022-02-09:
amdgpu:
- DCN 3.1 display fixes
- GC 10.3.1 harvest fix
- Page flip irq fix
- hwmon label fix
- DCN 2.0 display fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220210041137.5926-1-alexander.deucher@amd.com
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Build fix for non-x86 platforms after remap_io_mmapping changes. (Lucas De Marchi)
- Correctly propagate errors during object migration blits. (Thomas Hellström)
- Disable DRRS support on HSW/IVB where it is not implemented yet. (Ville Syrjälä)
- Correct pipe dbuf BIOS configuration during readout. (Ville Syrjälä)
- Properly sanitise BIOS buf configuration on ADL-P+ for !join_mbus cases. (Ville Syrjälä)
- Fix oops due to missing stack depot. (Ville Syrjälä)
- Workaround broken BIOS DBUF configuration on TGL/RKL. (Ville Syrjälä)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YgTuYAtpaV3XAGmx@tursulin-mobl2
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
* drm/panel: simple: Fix assignments from panel_dpi_probe()
* drm/privacy-screen: Cleanups
* drm/rockchip: Fix HDMI error cleanup; Fix RK3399 VOP register fields
* drm/vc4: HDMI fixes; Cleanups
* fbdev: Add fbdev core module with Daniel as maintainer; Cleanups
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YgTf1Zsflzq3JSFo@linux-uq9g
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter and can.
Current release - new code bugs:
- sparx5: fix get_stat64 out-of-bound access and crash
- smc: fix netdev ref tracker misuse
Previous releases - regressions:
- eth: ixgbevf: require large buffers for build_skb on 82599VF, avoid
overflows
- eth: ocelot: fix all IP traffic getting trapped to CPU with PTP
over IP
- bonding: fix rare link activation misses in 802.3ad mode
Previous releases - always broken:
- tcp: fix tcp sock mem accounting in zero-copy corner cases
- remove the cached dst when uncloning an skb dst and its metadata,
since we only have one ref it'd lead to an UaF
- netfilter:
- conntrack: don't refresh sctp entries in closed state
- conntrack: re-init state for retransmitted syn-ack, avoid
connection establishment getting stuck with strange stacks
- ctnetlink: disable helper autoassign, avoid it getting lost
- nft_payload: don't allow transport header access for fragments
- dsa: fix use of devres for mdio throughout drivers
- eth: amd-xgbe: disable interrupts during pci removal
- eth: dpaa2-eth: unregister netdev before disconnecting the PHY
- eth: ice: fix IPIP and SIT TSO offload"
* tag 'net-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
net: dsa: mv88e6xxx: fix use-after-free in mv88e6xxx_mdios_unregister
net: mscc: ocelot: fix mutex lock error during ethtool stats read
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
net: mpls: Fix GCC 12 warning
dpaa2-eth: unregister the netdev before disconnecting from the PHY
skbuff: cleanup double word in comment
net: macb: Align the dma and coherent dma masks
mptcp: netlink: process IPv6 addrs in creating listening sockets
selftests: mptcp: add missing join check
net: usb: qmi_wwan: Add support for Dell DW5829e
vlan: move dev_put into vlan_dev_uninit
vlan: introduce vlan_dev_free_egress_priority
ax25: fix UAF bugs of net_device caused by rebinding operation
net: dsa: fix panic when DSA master device unbinds on shutdown
net: amd-xgbe: disable interrupts during pci removal
tipc: rate limit warning for received illegal binding update
net: mdio: aspeed: Add missing MODULE_DEVICE_TABLE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
"Build and run-time fixes to pidfd, clone3, and ir tests"
* tag 'linux-kselftest-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ir: fix build with ancient kernel headers
selftests: fixup build warnings in pidfd / clone3 tests
pidfd: fix test failure due to stack overflow on some arches
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"Fixes to the test and usage documentation"
* tag 'linux-kselftest-kunit-fixes-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Fix usage bug
kunit: fix missing f in f-string in run_checks.py
|
|
Since struct mv88e6xxx_mdio_bus *mdio_bus is the bus->priv of something
allocated with mdiobus_alloc_size(), this means that mdiobus_free(bus)
will free the memory backing the mdio_bus as well. Therefore, the
mdio_bus->list element is freed memory, but we continue to iterate
through the list of MDIO buses using that list element.
To fix this, use the proper list iterator that handles element deletion
by keeping a copy of the list element next pointer.
Fixes: f53a2ce893b2 ("net: dsa: mv88e6xxx: don't use devres for mdiobus")
Reported-by: Rafael Richter <rafael.richter@gin.de>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20220210174017.3271099-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-02-10
Dan Carpenter propagates an error in FEC configuration.
Jesse fixes TSO offloads of IPIP and SIT frames.
Dave adds a dedicated LAG unregister function to resolve a KASAN error
and moves auxiliary device re-creation after LAG removal to the service
task to avoid issues with RTNL lock.
* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ice: Avoid RTNL lock when re-creating auxiliary device
ice: Fix KASAN error in LAG NETDEV_UNREGISTER handler
ice: fix IPIP and SIT TSO offload
ice: fix an error code in ice_cfg_phy_fec()
====================
Link: https://lore.kernel.org/r/20220210170515.2609656-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
An ongoing workqueue populates the stats buffer. At the same time, a user
might query the statistics. While writing to the buffer is mutex-locked,
reading from the buffer wasn't. This could lead to buggy reads by ethtool.
This patch fixes the former blamed commit, but the bug was introduced in
the latter.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Fixes: 1e1caa9735f90 ("ocelot: Clean up stats update deferred work")
Fixes: a556c76adc052 ("net: mscc: Add initial Ocelot switch support")
Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/all/20220210150451.416845-2-colin.foster@in-advantage.com/
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
From version 2.38, binutils default to ISA spec version 20191213. This
means that the csr read/write (csrr*/csrw*) instructions and fence.i
instruction has separated from the `I` extension, become two standalone
extensions: Zicsr and Zifencei. As the kernel uses those instruction,
this causes the following build failure:
CC arch/riscv/kernel/vdso/vgettimeofday.o
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h: Assembler messages:
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
<<BUILDDIR>>/arch/riscv/include/asm/vdso/gettimeofday.h:71: Error: unrecognized opcode `csrr a5,0xc01'
The fix is to specify those extensions explicitely in -march. However as
older binutils version do not support this, we first need to detect
that.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Tested-by: Alexandre Ghiti <alexandre.ghiti@canonical.com>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
There is numa_add_cpu() when cpus online, accordingly, there should be
numa_remove_cpu() when cpus offline.
Signed-off-by: Pingfan Liu <kernelfans@gmail.com>
Fixes: 4f0e8eef772e ("riscv: Add numa support for riscv64 platform")
Cc: stable@vger.kernel.org
[Palmer: Add missing NUMA include]
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
If a call to re-create the auxiliary device happens in a context that has
already taken the RTNL lock, then the call flow that recreates auxiliary
device can hang if there is another attempt to claim the RTNL lock by the
auxiliary driver.
To avoid this, any call to re-create auxiliary devices that comes from
an source that is holding the RTNL lock (e.g. netdev notifier when
interface exits a bond) should execute in a separate thread. To
accomplish this, add a flag to the PF that will be evaluated in the
service task and dealt with there.
Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Currently, the same handler is called for both a NETDEV_BONDING_INFO
LAG unlink notification as for a NETDEV_UNREGISTER call. This is
causing a problem though, since the netdev_notifier_info passed has
a different structure depending on which event is passed. The problem
manifests as a call trace from a BUG: KASAN stack-out-of-bounds error.
Fix this by creating a handler specific to NETDEV_UNREGISTER that only
is passed valid elements in the netdev_notifier_info struct for the
NETDEV_UNREGISTER event.
Also included is the removal of an unbalanced dev_put on the peer_netdev
and related braces.
Fixes: 6a8b357278f5 ("ice: Respond to a NETDEV_UNREGISTER event for LAG")
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Acked-by: Jonathan Toppins <jtoppins@redhat.com>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
The driver was avoiding offload for IPIP (at least) frames due to
parsing the inner header offsets incorrectly when trying to check
lengths.
This length check works for VXLAN frames but fails on IPIP frames
because skb_transport_offset points to the inner header in IPIP
frames, which meant the subtraction of transport_header from
inner_network_header returns a negative value (-20).
With the code before this patch, everything continued to work, but GSO
was being used to segment, causing throughputs of 1.5Gb/s per thread.
After this patch, throughput is more like 10Gb/s per thread for IPIP
traffic.
Fixes: e94d44786693 ("ice: Implement filter sync, NDO operations and bump version")
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
Propagate the error code from ice_get_link_default_override() instead
of returning success.
Fixes: ea78ce4dab05 ("ice: add link lenient and default override support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Tested-by: Gurucharan G <gurucharanx.g@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
When building with automatic stack variable initialization, GCC 12
complains about variables defined outside of switch case statements.
Move the variable outside the switch, which silences the warning:
./net/mpls/af_mpls.c:1624:21: error: statement will never be executed [-Werror=switch-unreachable]
1624 | int err;
| ^~~
Signed-off-by: Victor Erminpour <victor.erminpour@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The netdev should be unregistered before we are disconnecting from the
MAC/PHY so that the dev_close callback is called and the PHY and the
phylink workqueues are actually stopped before we are disconnecting and
destroying the phylink instance.
Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")
Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Remove the second 'to'.
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Single page and coherent memory blocks can use different DMA masks
when the macb accesses physical memory directly. The kernel is clever
enough to allocate pages that fit into the requested address width.
When using the ARM SMMU, the DMA mask must be the same for single
pages and big coherent memory blocks. Otherwise the translation
tables turn into one big mess.
[ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
[ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
[ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK
[ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
Since using the same DMA mask does not hurt direct 1:1 physical
memory mappings, this commit always aligns DMA and coherent masks.
Signed-off-by: Marc St-Amand <mstamand@ciena.com>
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 5.17
- nvme-tcp: fix bogus request completion when failing to send AER
(Sagi Grimberg)
- add the missing nvme_complete_req tracepoint for batched completion
(Bean Huo)"
* tag 'nvme-5.17-2022-02-10' of git://git.infradead.org/nvme:
nvme-tcp: fix bogus request completion when failing to send AER
nvme: add nvme_complete_req tracepoint for batched completion
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fix from Thomas Bogendoerfer:
"Device tree fix for Ingenic CI20"
* tag 'mips-fixes-5.17_3' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: DTS: CI20: fix how ddc power is enabled
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"Another audit fix, this time a single rather small but important fix
for an oops/page-fault caused by improperly accessing userspace
memory"
* tag 'audit-pr-20220209' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: don't deref the syscall args when checking the openat2 open_how::flags
|
|
The function tipc_mon_rcv() allows a node to receive and process
domain_record structs from peer nodes to track their views of the
network topology.
This patch verifies that the number of members in a received domain
record does not exceed the limit defined by MAX_MON_DOMAIN, something
that may otherwise lead to a stack overflow.
tipc_mon_rcv() is called from the function tipc_link_proto_rcv(), where
we are reading a 32 bit message data length field into a uint16. To
avert any risk of bit overflow, we add an extra sanity check for this in
that function. We cannot see that happen with the current code, but
future designers being unaware of this risk, may introduce it by
allowing delivery of very large (> 64k) sk buffers from the bearer
layer. This potential problem was identified by Eric Dumazet.
This fixes CVE-2022-0435
Reported-by: Samuel Page <samuel.page@appgate.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Fixes: 35c55c9877f8 ("tipc: add neighbor monitoring framework")
Signed-off-by: Jon Maloy <jmaloy@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Samuel Page <samuel.page@appgate.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Mat Martineau says:
====================
mptcp: Fixes for 5.17
Patch 1 fixes a MPTCP selftest bug that combined the results of two
separate tests in the test output.
Patch 2 fixes a problem where advertised IPv6 addresses were not actually
available for incoming MP_JOIN requests.
====================
Link: https://lore.kernel.org/r/20220210012508.226880-1-mathew.j.martineau@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This change updates mptcp_pm_nl_create_listen_socket() to create
listening sockets bound to IPv6 addresses (where IPv6 is supported).
Fixes: 1729cf186d8a ("mptcp: create the listening socket for new port")
Acked-by: Geliang Tang <geliang.tang@suse.com>
Signed-off-by: Kishen Maloor <kishen.maloor@intel.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This function also writes the name of the test with its ID, making clear
a new test has been executed.
Without that, the ADD_ADDR results from this test was appended at the
end of the previous test causing confusions. Especially when the second
test was failing, we had:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
add[fail] got 2 ADD_ADDR[s] expected 3
In fact, this 17th test was OK but not the 18th one.
Now we have:
17 signal invalid addresses syn[ ok ] - synack[ ok ] - ack[ ok ]
add[ ok ] - echo [ ok ]
18 signal addresses race test syn[fail] got 2 JOIN[s] syn expected 3
- synack[fail] got 2 JOIN[s] synack expected
- ack[fail] got 2 JOIN[s] ack expected 3
add[fail] got 2 ADD_ADDR[s] expected 3
Fixes: 33c563ad28e3 ("selftests: mptcp: add_addr and echo race test")
Reported-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Dell DW5829e same as DW5821e except the CAT level.
DW5821e supports CAT16 but DW5829e supports CAT9.
Also, DW5829e includes normal and eSIM type.
Please see below test evidence:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e6 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0
D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1
P: Vendor=413c ProdID=81e4 Rev=03.18
S: Manufacturer=Dell Inc.
S: Product=DW5829e-eSIM Snapdragon X20 LTE
S: SerialNumber=0123456789ABCDEF
C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan
I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid
I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Acked-by: Bjørn Mork <bjorn@mork.no>
Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Fixes hangs on driver load with multiple displays on
DCN 2.0 parts.
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=215511
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1877
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1886
Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
As reported by Jeff, dereferencing the openat2 syscall argument in
audit_match_perm() to obtain the open_how::flags can result in an
oops/page-fault. This patch fixes this by using the open_how struct
that we store in the audit_context with audit_openat2_how().
Independent of this patch, Richard Guy Briggs posted a similar patch
to the audit mailing list roughly 40 minutes after this patch was
posted.
Cc: stable@vger.kernel.org
Fixes: 1c30e3af8a79 ("audit: add support for the openat2 syscall")
Reported-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
|
|
it will cause hwmon node of power1_label is not created.
v2:
the hwmon node of "power1_label" is always needed for all ASICs.
and the patch will remove ASIC type check for "power1_label".
Fixes: ae07970a0621d6 ("drm/amd/pm: add support for hwmon control of slow and fast PPT limit on vangogh")
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
Even if can_apply_edp_fast_boot is set to 1 at boot, this flag will
be cleared to 0 at S3 resume.
[How]
Keep eDP Vdd on when eDP stream is already enabled.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Zhan Liu <Zhan.Liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Fix clamping to match register field size
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Jasdeep Dhillon <jdhillon@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
[Why]
pflip interrupt order are mapped 1 to 1 to otg id.
e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2...
Linux DM registers pflip interrupts per number of crtcs.
In fused pipe case crtc numbers can be less than otg id.
e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2
so DM only registers irq_src 26,27.
This is a bug since if pipe#2 remains unfused DM never gets
otg2 pflip interrupt (irq_src=28)
That may results in gfx failure due to pflip timeout.
[How]
Register pflip interrupts per max num of otg instead of num_crtc
Signed-off-by: Roman Li <Roman.Li@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Confirmed with hardware team, there is harvesting for gc 10.3.1.
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
