| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 2de8a1b46756b5a79d8447f99afdfe49e914225a ]
Move/reorder some functions to remove sc16is7xx_ier_set() and
sc16is7xx_stop_tx() prototypes declarations.
No functional change.
sc16is7xx_ier_set() was introduced in
commit cc4c1d05eb10 ("sc16is7xx: Properly resume TX after stop").
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Link: https://lore.kernel.org/r/20231221231823.2327894-16-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1c05bf6c0262 ("serial: sc16is7xx: remove useless enable of enhanced features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 22a048b0749346b6e3291892d06b95278d5ba84a ]
This macro is not used anywhere.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230905181649.134720-1-hugo@hugovil.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1c05bf6c0262 ("serial: sc16is7xx: remove useless enable of enhanced features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f3d12ec847b945d5d65846c85f062d07d5e73164 ]
DbC may add 1024 bogus bytes to the beginneing of the receiving endpoint
if DbC hw triggers a STALL event before any Transfer Blocks (TRBs) for
incoming data are queued, but driver handles the event after it queued
the TRBs.
This is possible as xHCI DbC hardware may trigger spurious STALL transfer
events even if endpoint is empty. The STALL event contains a pointer
to the stalled TRB, and "remaining" untransferred data length.
As there are no TRBs queued yet the STALL event will just point to first
TRB position of the empty ring, with '0' bytes remaining untransferred.
DbC driver is polling for events, and may not handle the STALL event
before /dev/ttyDBC0 is opened and incoming data TRBs are queued.
The DbC event handler will now assume the first queued TRB (length 1024)
has stalled with '0' bytes remaining untransferred, and copies the data
This race situation can be practically mitigated by making sure the event
handler handles all pending transfer events when DbC reaches configured
state, and only then create dev/ttyDbC0, and start queueing transfers.
The event handler can this way detect the STALL events on empty rings
and discard them before any transfers are queued.
This does in practice solve the issue, but still leaves a small possible
gap for the race to trigger.
We still need a way to distinguish spurious STALLs on empty rings with '0'
bytes remaing, from actual STALL events with all bytes transmitted.
Cc: stable <stable@kernel.org>
Fixes: dfba2174dc42 ("usb: xhci: Add DbC support in xHCI driver")
Tested-by: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cab63934c33b12c0d1e9f4da7450928057f2c142 ]
Event polling delay is set to 0 if there are any pending requests in
either rx or tx requests lists. Checking for pending requests does
not work well for "IN" transfers as the tty driver always queues
requests to the list and TRBs to the ring, preparing to receive data
from the host.
This causes unnecessary busylooping and cpu hogging.
Only set the event polling delay to 0 if there are pending tx "write"
transfers, or if it was less than 10ms since last active data transfer
in any direction.
Cc: Łukasz Bartosik <ukaszb@chromium.org>
Fixes: fb18e5bb9660 ("xhci: dbc: poll at different rate depending on data transfer activity")
Cc: stable@vger.kernel.org
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20250505125630.561699-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 03e3d9c2bd85cda941b3cf78e895c1498ac05c5f ]
Queue event polling work with 0 delay in case there are pending transfers
queued up. This is part 2 of a 3 part series that roughly triples dbc
performace when using adb push and pull over dbc.
Max/min push rate after patches is 210/118 MB/s, pull rate 171/133 MB/s,
tested with large files (300MB-9GB) by Łukasz Bartosik
First performance improvement patch was commit 31128e7492dc
("xhci: dbc: add dbgtty request to end of list once it completes")
Cc: Łukasz Bartosik <ukaszb@chromium.org>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20241227120142.1035206-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit de3edd47a18fe05a560847cc3165871474e08196 ]
xhci DbC driver polls the host controller for DbC events at a reduced
rate when DbC is enabled but there are no active data transfers.
Allow users to modify this reduced poll interval via dbc_poll_interval_ms
sysfs entry. Unit is milliseconds and accepted range is 0 to 5000.
Max interval of 5000 ms is selected as it matches the common 5 second
timeout used in usb stack.
Default value is 64 milliseconds.
A long interval is useful when users know there won't be any activity
on systems connected via DbC for long periods, and want to avoid
battery drainage due to unnecessary CPU usage.
Example being Android Debugger (ADB) usage over DbC on ChromeOS systems
running Android Runtime.
[minor changes and rewording -Mathias]
Co-developed-by: Samuel Jacob <samjaco@google.com>
Signed-off-by: Samuel Jacob <samjaco@google.com>
Signed-off-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240626124835.1023046-5-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fb18e5bb96603cc79d97f03e4c05f3992cf28624 ]
DbC driver starts polling for events immediately when DbC is enabled.
The current polling interval is 1ms, which keeps the CPU busy, impacting
power management even when there are no active data transfers.
Solve this by polling at a slower rate, with a 64ms interval as default
until a transfer request is queued, or if there are still are pending
unhandled transfers at event completion.
Tested-by: Uday M Bhat <uday.m.bhat@intel.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240229141438.619372-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit edf1664f3249a091a2b91182fc087b3253b0b4c2 ]
When DbC is enabled the first port on the xHC host acts as a usb device.
xHC provides the descriptors automatically when the DbC device is
enumerated. Most of the values are hardcoded, but some fields such as
idProduct, idVendor, bcdDevice and bInterfaceProtocol can be modified.
Add sysfs entries that allow userspace to change these.
User can only change them before dbc is enabled, i.e. before writing
"enable" to dbc sysfs file as we don't want these values to change while
device is connected, or during enumeration.
Add documentation for these entries in
Documentation/ABI/testing/sysfs-bus-pci-drivers-xhci_hcd
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230317154715.535523-9-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: f3d12ec847b9 ("xhci: dbc: fix bogus 1024 byte prefix if ttyDBC read races with stall event")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit c3496c052ac36ea98ec4f8e95ae6285a425a2457 ]
The call to 'continue_if' was missing: it properly marks a subtest as
'skipped' if the attached condition is not valid.
Without that, the test is wrongly marked as passed on older kernels.
Fixes: b5e2fb832f48 ("selftests: mptcp: add explicit test case for remove/readd")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-4-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit f92199f551e617fae028c5c5905ddd63e3616e18 ]
To prevent test instability in the "delete re-add signal" test caused by
ADD_ADDR retransmissions, disable retransmissions for this test by setting
net.mptcp.add_addr_timeout to 0.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250815-net-mptcp-misc-fixes-6-17-rc2-v1-6-521fe9957892@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: c3496c052ac3 ("selftests: mptcp: join: mark 'delete re-add signal' as skipped if not supported")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 268eb6fb908bc82ce479e4dba9a2cad11f536c9c ]
Only i.MX8MP need dma-range property to let USB controller work properly.
Remove dma-range from required list and add limitation for imx8mp.
Fixes: d2a704e29711 ("dt-bindings: usb: dwc3-imx8mp: add imx8mp dwc3 glue bindings")
Cc: stable <stable@kernel.org>
Reviewed-by: Jun Li <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit e84cb860ac3ce67ec6ecc364433fd5b412c448bc ]
The special C-flag case expects the ADD_ADDR to be received when
switching to 'fully-established'. But for various reasons, the ADD_ADDR
could be sent after the "4th ACK", and the special case doesn't work.
On NIPA, the new test validating this special case for the C-flag failed
a few times, e.g.
102 default limits, server deny join id 0
syn rx [FAIL] got 0 JOIN[s] syn rx expected 2
Server ns stats
(...)
MPTcpExtAddAddrTx 1
MPTcpExtEchoAdd 1
Client ns stats
(...)
MPTcpExtAddAddr 1
MPTcpExtEchoAddTx 1
synack rx [FAIL] got 0 JOIN[s] synack rx expected 2
ack rx [FAIL] got 0 JOIN[s] ack rx expected 2
join Rx [FAIL] see above
syn tx [FAIL] got 0 JOIN[s] syn tx expected 2
join Tx [FAIL] see above
I had a suspicion about what the issue could be: the ADD_ADDR might have
been received after the switch to the 'fully-established' state. The
issue was not easy to reproduce. The packet capture shown that the
ADD_ADDR can indeed be sent with a delay, and the client would not try
to establish subflows to it as expected.
A simple fix is not to mark the endpoints as 'used' in the C-flag case,
when looking at creating subflows to the remote initial IP address and
port. In this case, there is no need to try.
Note: newly added fullmesh endpoints will still continue to be used as
expected, thanks to the conditions behind mptcp_pm_add_addr_c_flag_case.
Fixes: 4b1ff850e0c1 ("mptcp: pm: in-kernel: usable client side with C-flag")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251020-net-mptcp-c-flag-late-add-addr-v1-1-8207030cb0e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ applied to pm_netlink.c instead of pm_kernel.c ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 35561bab768977c9e05f1f1a9bc00134c85f3e28 ]
The include/generated/asm-offsets.h is generated in Kbuild during
compiling from arch/SRCARCH/kernel/asm-offsets.c. When we want to
generate another similar offset header file, circular dependency can
happen.
For example, we want to generate a offset file include/generated/test.h,
which is included in include/sched/sched.h. If we generate asm-offsets.h
first, it will fail, as include/sched/sched.h is included in asm-offsets.c
and include/generated/test.h doesn't exist; If we generate test.h first,
it can't success neither, as include/generated/asm-offsets.h is included
by it.
In x86_64, the macro COMPILE_OFFSETS is used to avoid such circular
dependency. We can generate asm-offsets.h first, and if the
COMPILE_OFFSETS is defined, we don't include the "generated/test.h".
And we define the macro COMPILE_OFFSETS for all the asm-offsets.c for this
purpose.
Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 45c222468d33202c07c41c113301a4b9c8451b8f ]
After setting the BTRFS_ROOT_FORCE_COW flag on the root we are doing a
full write barrier, smp_wmb(), but we don't need to, all we need is a
smp_mb__after_atomic(). The use of the smp_wmb() is from the old days
when we didn't use a bit and used instead an int field in the root to
signal if cow is forced. After the int field was changed to a bit in
the root's state (flags field), we forgot to update the memory barrier
in create_pending_snapshot() to smp_mb__after_atomic(), but we did the
change in commit_fs_roots() after clearing BTRFS_ROOT_FORCE_COW. That
happened in commit 27cdeb7096b8 ("Btrfs: use bitfield instead of integer
data type for the some variants in btrfs_root"). On the reader side, in
should_cow_block(), we also use the counterpart smp_mb__before_atomic()
which generates further confusion.
So change the smp_wmb() to smp_mb__after_atomic(). In fact we don't
even need any barrier at all since create_pending_snapshot() is called
in the critical section of a transaction commit and therefore no one
can concurrently join/attach the transaction, or start a new one, until
the transaction is unblocked. By the time someone starts a new transaction
and enters should_cow_block(), a lot of implicit memory barriers already
took place by having acquired several locks such as fs_info->trans_lock
and extent buffer locks on the root node at least. Nevertlheless, for
consistency use smp_mb__after_atomic() after setting the force cow bit
in create_pending_snapshot().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2f5b8095ea47b142c56c09755a8b1e14145a2d30 ]
Currently we have this odd behaviour:
1) At btrfs_replay_log() we drop the reference of the log root tree if
the call to btrfs_recover_log_trees() failed;
2) But if the call to btrfs_recover_log_trees() did not fail, we don't
drop the reference in btrfs_replay_log() - we expect that
btrfs_recover_log_trees() does it in case it returns success.
Let's simplify this and make btrfs_replay_log() always drop the reference
on the log root tree, not only this simplifies code as it's what makes
sense since it's btrfs_replay_log() who grabbed the reference in the first
place.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a7f3dfb8293c4cee99743132d69863a92e8f4875 ]
Replace max_t() followed by min_t() with a single clamp().
As was pointed by David Laight in
https://lore.kernel.org/linux-btrfs/20250906122458.75dfc8f0@pumpkin/
the calculation may overflow u32 when the input value is too large, so
clamp_t() is not used. In practice the expected values are in range of
megabytes to gigabytes (throughput limit) so the bug would not happen.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: David Sterba <dsterba@suse.com>
[ Use clamp() and add explanation. ]
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0d703963d297964451783e1a0688ebdf74cd6151 ]
The hint block group selection in the extent allocator is wrong in the
first place, as it can select the dedicated data relocation block group for
the normal data allocation.
Since we separated the normal data space_info and the data relocation
space_info, we can easily identify a block group is for data relocation or
not. Do not choose it for the normal data allocation.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e1c2c6c2c40ce99e0d2633b212f43c702c1a002 ]
Newer AMD systems can support up to 16 channels per EDAC "mc" device.
These are detected by the EDAC module running on the device, and the
current EDAC interface is appropriately enumerated.
The legacy EDAC sysfs interface however, provides device attributes for
channels 0 through 11 only. Consequently, the last four channels, 12
through 15, will not be enumerated and will not be visible through the
legacy sysfs interface.
Add additional device attributes to ensure that all 16 channels, if
present, are enumerated by and visible through the legacy EDAC sysfs
interface.
Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250916203242.1281036-1-avadhut.naik@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1cc1baef67ac6c09b74629ca053bf3fb812f7dc ]
The LFENCE retpoline mitigation is not secure but the kernel prints
inconsistent messages about this fact. The dmesg log says 'Mitigation:
LFENCE', implying the system is mitigated. But sysfs reports 'Vulnerable:
LFENCE' implying the system (correctly) is not mitigated.
Fix this by printing a consistent 'Vulnerable: LFENCE' string everywhere
when this mitigation is selected.
Signed-off-by: David Kaplan <david.kaplan@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250915134706.3201818-1-david.kaplan@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 153f9e74dec230f2e070e16fa061bc7adfd2c450 ]
get_perf_callchain() doesn't support cross-task unwinding for user space
stacks, have it return NULL if both the crosstask and user arguments are
set.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250820180428.426423415@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit dd831ac8221e691e9e918585b1003c7071df0379 upstream.
To prevent a potential crash in agg_dequeue (net/sched/sch_qfq.c)
when cl->qdisc->ops->peek(cl->qdisc) returns NULL, we check the return
value before using it, similar to the existing approach in sch_hfsc.c.
To avoid code duplication, the following changes are made:
1. Changed qdisc_warn_nonwc(include/net/pkt_sched.h) into a static
inline function.
2. Moved qdisc_peek_len from net/sched/sch_hfsc.c to
include/net/pkt_sched.h so that sch_qfq can reuse it.
3. Applied qdisc_peek_len in agg_dequeue to avoid crashing.
Signed-off-by: Xiang Mei <xmei5@asu.edu>
Reviewed-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://patch.msgid.link/20250705212143.3982664-1-xmei5@asu.edu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Link: https://lore.kernel.org/r/20251027183501.227243846@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Salvatore Bonaccorso <carnil@debian.org>
Tested-by: Slade Watkins <sr@sladewatkins.com>
Tested-by: Peter Schneider <pschneider1968@googlemail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ron Economos <re@w6rz.net>
Tested-by: Brett A C Sheffield <bacs@librecast.net>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Tested-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 6f40e50ceb99fc8ef37e5c56e2ec1d162733fef0 upstream.
handle_response() dereferences the payload as a 4-byte handle without
verifying that the declared payload size is at least 4 bytes. A malformed
or truncated message from ksmbd.mountd can lead to a 4-byte read past the
declared payload size. Validate the size before dereferencing.
This is a minimal fix to guard the initial handle read.
Fixes: 0626e6641f6b ("cifsd: add server handler for central processing and tranport layers")
Cc: stable@vger.kernel.org
Reported-by: Qianchang Zhao <pioooooooooip@gmail.com>
Signed-off-by: Qianchang Zhao <pioooooooooip@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 0c33aa1804d101c11ba1992504f17a42233f0e11 upstream.
Neoverse-V3AE is also affected by erratum #3312417, as described in its
Software Developer Errata Notice (SDEN) document:
Neoverse V3AE (MP172) SDEN v9.0, erratum 3312417
https://developer.arm.com/documentation/SDEN-2615521/9-0/
Enable the workaround for Neoverse-V3AE, and document this.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[ Ryan: Trivial backport ]
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3bbf004c4808e2c3241e5c1ad6cc102f38a03c39 upstream.
Add cputype definitions for Neoverse-V3AE. These will be used for errata
detection in subsequent patches.
These values can be found in the Neoverse-V3AE TRM:
https://developer.arm.com/documentation/SDEN-2615521/9-0/
... in section A.6.1 ("MIDR_EL1, Main ID Register").
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
[ Ryan: Trivial backport ]
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit a584c7734a4dd050451fcdd65c66317e15660e81 which is
commit 91b80cc5b39f00399e8e2d17527cad2c7fa535e2 upstream.
This fixes the following build error:
map_hugetlb.c: In function 'main':
map_hugetlb.c:79:25: warning: implicit declaration of function 'default_huge_page_size' [-Wimplicit-function-declaration]
79 | hugepage_size = default_huge_page_size();
Signed-off-by: Leon Hwang <leon.hwang@linux.dev>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit f04aad36a07cc17b7a5d5b9a2d386ce6fae63e93 upstream.
syzkaller discovered the following crash: (kernel BUG)
[ 44.607039] ------------[ cut here ]------------
[ 44.607422] kernel BUG at mm/userfaultfd.c:2067!
[ 44.608148] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 44.608814] CPU: 1 UID: 0 PID: 2475 Comm: reproducer Not tainted 6.16.0-rc6 #1 PREEMPT(none)
[ 44.609635] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 44.610695] RIP: 0010:userfaultfd_release_all+0x3a8/0x460
<snip other registers, drop unreliable trace>
[ 44.617726] Call Trace:
[ 44.617926] <TASK>
[ 44.619284] userfaultfd_release+0xef/0x1b0
[ 44.620976] __fput+0x3f9/0xb60
[ 44.621240] fput_close_sync+0x110/0x210
[ 44.622222] __x64_sys_close+0x8f/0x120
[ 44.622530] do_syscall_64+0x5b/0x2f0
[ 44.622840] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 44.623244] RIP: 0033:0x7f365bb3f227
Kernel panics because it detects UFFD inconsistency during
userfaultfd_release_all(). Specifically, a VMA which has a valid pointer
to vma->vm_userfaultfd_ctx, but no UFFD flags in vma->vm_flags.
The inconsistency is caused in ksm_madvise(): when user calls madvise()
with MADV_UNMEARGEABLE on a VMA that is registered for UFFD in MINOR mode,
it accidentally clears all flags stored in the upper 32 bits of
vma->vm_flags.
Assuming x86_64 kernel build, unsigned long is 64-bit and unsigned int and
int are 32-bit wide. This setup causes the following mishap during the &=
~VM_MERGEABLE assignment.
VM_MERGEABLE is a 32-bit constant of type unsigned int, 0x8000'0000.
After ~ is applied, it becomes 0x7fff'ffff unsigned int, which is then
promoted to unsigned long before the & operation. This promotion fills
upper 32 bits with leading 0s, as we're doing unsigned conversion (and
even for a signed conversion, this wouldn't help as the leading bit is 0).
& operation thus ends up AND-ing vm_flags with 0x0000'0000'7fff'ffff
instead of intended 0xffff'ffff'7fff'ffff and hence accidentally clears
the upper 32-bits of its value.
Fix it by changing `VM_MERGEABLE` constant to unsigned long, using the
BIT() macro.
Note: other VM_* flags are not affected: This only happens to the
VM_MERGEABLE flag, as the other VM_* flags are all constants of type int
and after ~ operation, they end up with leading 1 and are thus converted
to unsigned long with leading 1s.
Note 2:
After commit 31defc3b01d9 ("userfaultfd: remove (VM_)BUG_ON()s"), this is
no longer a kernel BUG, but a WARNING at the same place:
[ 45.595973] WARNING: CPU: 1 PID: 2474 at mm/userfaultfd.c:2067
but the root-cause (flag-drop) remains the same.
[akpm@linux-foundation.org: rust bindgen wasn't able to handle BIT(), from Miguel]
Link: https://lore.kernel.org/oe-kbuild-all/202510030449.VfSaAjvd-lkp@intel.com/
Link: https://lkml.kernel.org/r/20251001090353.57523-2-acsjakub@amazon.de
Fixes: 7677f7fd8be7 ("userfaultfd: add minor fault registration mode")
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: SeongJae Park <sj@kernel.org>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Cc: Xu Xin <xu.xin16@zte.com.cn>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Peter Xu <peterx@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[acsjakub@amazon.de: adapt rust bindgen to older versions]
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 9daa5a8795865f9a3c93d8d1066785b07ded6073 upstream.
Starting with 'commit 2297791c92d0 ("s390/cio: dont unregister
subchannel from child-drivers")', cio no longer unregisters
subchannels when the attached device is invalid or unavailable.
As an unintended side-effect, the cio_ignore purge function no longer
removes subchannels for devices on the cio_ignore list if no CCW device
is attached. This situation occurs when a CCW device is non-operational
or unavailable
To ensure the same outcome of the purge function as when the
current cio_ignore list had been active during boot, update the purge
function to remove I/O subchannels without working CCW devices if the
associated device number is found on the cio_ignore list.
Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers")
Suggested-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit b2d99376c5d61eb60ffdb6c503e4b6c8f9712ddd ]
ksmbd.mount will give each interfaces list and bind_interfaces_only flags
to ksmbd server. Previously, the interfaces list was sent only
when bind_interfaces_only was enabled.
ksmbd server browse only interfaces list given from ksmbd.conf on
FSCTL_QUERY_INTERFACE_INFO IOCTL.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
unavailable RMID
[ Upstream commit 15292f1b4c55a3a7c940dbcb6cb8793871ed3d92 ]
Users can create as many monitoring groups as the number of RMIDs supported
by the hardware. However, on AMD systems, only a limited number of RMIDs
are guaranteed to be actively tracked by the hardware. RMIDs that exceed
this limit are placed in an "Unavailable" state.
When a bandwidth counter is read for such an RMID, the hardware sets
MSR_IA32_QM_CTR.Unavailable (bit 62). When such an RMID starts being tracked
again the hardware counter is reset to zero. MSR_IA32_QM_CTR.Unavailable
remains set on first read after tracking re-starts and is clear on all
subsequent reads as long as the RMID is tracked.
resctrl miscounts the bandwidth events after an RMID transitions from the
"Unavailable" state back to being tracked. This happens because when the
hardware starts counting again after resetting the counter to zero, resctrl
in turn compares the new count against the counter value stored from the
previous time the RMID was tracked.
This results in resctrl computing an event value that is either undercounting
(when new counter is more than stored counter) or a mistaken overflow (when
new counter is less than stored counter).
Reset the stored value (arch_mbm_state::prev_msr) of MSR_IA32_QM_CTR to
zero whenever the RMID is in the "Unavailable" state to ensure accurate
counting after the RMID resets to zero when it starts to be tracked again.
Example scenario that results in mistaken overflow
==================================================
1. The resctrl filesystem is mounted, and a task is assigned to a
monitoring group.
$mount -t resctrl resctrl /sys/fs/resctrl
$mkdir /sys/fs/resctrl/mon_groups/test1/
$echo 1234 > /sys/fs/resctrl/mon_groups/test1/tasks
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
21323 <- Total bytes on domain 0
"Unavailable" <- Total bytes on domain 1
Task is running on domain 0. Counter on domain 1 is "Unavailable".
2. The task runs on domain 0 for a while and then moves to domain 1. The
counter starts incrementing on domain 1.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
7345357 <- Total bytes on domain 0
4545 <- Total bytes on domain 1
3. At some point, the RMID in domain 0 transitions to the "Unavailable"
state because the task is no longer executing in that domain.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
"Unavailable" <- Total bytes on domain 0
434341 <- Total bytes on domain 1
4. Since the task continues to migrate between domains, it may eventually
return to domain 0.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
17592178699059 <- Overflow on domain 0
3232332 <- Total bytes on domain 1
In this case, the RMID on domain 0 transitions from "Unavailable" state to
active state. The hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62) when
the counter is read and begins tracking the RMID counting from 0.
Subsequent reads succeed but return a value smaller than the previously
saved MSR value (7345357). Consequently, the resctrl's overflow logic is
triggered, it compares the previous value (7345357) with the new, smaller
value and incorrectly interprets this as a counter overflow, adding a large
delta.
In reality, this is a false positive: the counter did not overflow but was
simply reset when the RMID transitioned from "Unavailable" back to active
state.
Here is the text from APM [1] available from [2].
"In PQOS Version 2.0 or higher, the MBM hardware will set the U bit on the
first QM_CTR read when it begins tracking an RMID that it was not
previously tracking. The U bit will be zero for all subsequent reads from
that RMID while it is still tracked by the hardware. Therefore, a QM_CTR
read with the U bit set when that RMID is in use by a processor can be
considered 0 when calculating the difference with a subsequent read."
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3 Monitoring L3 Memory
Bandwidth (MBM).
[ bp: Split commit message into smaller paragraph chunks for better
consumption. ]
Fixes: 4d05bf71f157d ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org # needs adjustments for <= v6.17
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
(cherry picked from commit 15292f1b4c55a3a7c940dbcb6cb8793871ed3d92)
[babu.moger@amd.com: Fix conflict for v6.1 stable]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a91c8096590bd7801a26454789f2992094fe36da ]
The original code causes a circular locking dependency found by lockdep.
======================================================
WARNING: possible circular locking dependency detected
6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 Tainted: G S U
------------------------------------------------------
xe_fault_inject/5091 is trying to acquire lock:
ffff888156815688 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}, at: __flush_work+0x25d/0x660
but task is already holding lock:
ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&devcd->mutex){+.+.}-{3:3}:
mutex_lock_nested+0x4e/0xc0
devcd_data_write+0x27/0x90
sysfs_kf_bin_write+0x80/0xf0
kernfs_fop_write_iter+0x169/0x220
vfs_write+0x293/0x560
ksys_write+0x72/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x2bf/0x2660
do_syscall_64+0x93/0xb60
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (kn->active#236){++++}-{0:0}:
kernfs_drain+0x1e2/0x200
__kernfs_remove+0xae/0x400
kernfs_remove_by_name_ns+0x5d/0xc0
remove_files+0x54/0x70
sysfs_remove_group+0x3d/0xa0
sysfs_remove_groups+0x2e/0x60
device_remove_attrs+0xc7/0x100
device_del+0x15d/0x3b0
devcd_del+0x19/0x30
process_one_work+0x22b/0x6f0
worker_thread+0x1e8/0x3d0
kthread+0x11c/0x250
ret_from_fork+0x26c/0x2e0
ret_from_fork_asm+0x1a/0x30
-> #0 ((work_completion)(&(&devcd->del_wk)->work)){+.+.}-{0:0}:
__lock_acquire+0x1661/0x2860
lock_acquire+0xc4/0x2f0
__flush_work+0x27a/0x660
flush_delayed_work+0x5d/0xa0
dev_coredump_put+0x63/0xa0
xe_driver_devcoredump_fini+0x12/0x20 [xe]
devm_action_release+0x12/0x30
release_nodes+0x3a/0x120
devres_release_all+0x8a/0xd0
device_unbind_cleanup+0x12/0x80
device_release_driver_internal+0x23a/0x280
device_driver_detach+0x14/0x20
unbind_store+0xaf/0xc0
drv_attr_store+0x21/0x50
sysfs_kf_write+0x4a/0x80
kernfs_fop_write_iter+0x169/0x220
vfs_write+0x293/0x560
ksys_write+0x72/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x2bf/0x2660
do_syscall_64+0x93/0xb60
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of: (work_completion)(&(&devcd->del_wk)->work) --> kn->active#236 --> &devcd->mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&devcd->mutex);
lock(kn->active#236);
lock(&devcd->mutex);
lock((work_completion)(&(&devcd->del_wk)->work));
*** DEADLOCK ***
5 locks held by xe_fault_inject/5091:
#0: ffff8881129f9488 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x72/0xf0
#1: ffff88810c755078 (&of->mutex#2){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x123/0x220
#2: ffff8881054811a0 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x55/0x280
#3: ffff888156815620 (&devcd->mutex){+.+.}-{3:3}, at: dev_coredump_put+0x3f/0xa0
#4: ffffffff8359e020 (rcu_read_lock){....}-{1:2}, at: __flush_work+0x72/0x660
stack backtrace:
CPU: 14 UID: 0 PID: 5091 Comm: xe_fault_inject Tainted: G S U 6.16.0-rc6-lgci-xe-xe-pw-151626v3+ #1 PREEMPT_{RT,(lazy)}
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Micro-Star International Co., Ltd. MS-7D25/PRO Z690-A DDR4(MS-7D25), BIOS 1.10 12/13/2021
Call Trace:
<TASK>
dump_stack_lvl+0x91/0xf0
dump_stack+0x10/0x20
print_circular_bug+0x285/0x360
check_noncircular+0x135/0x150
? register_lock_class+0x48/0x4a0
__lock_acquire+0x1661/0x2860
lock_acquire+0xc4/0x2f0
? __flush_work+0x25d/0x660
? mark_held_locks+0x46/0x90
? __flush_work+0x25d/0x660
__flush_work+0x27a/0x660
? __flush_work+0x25d/0x660
? trace_hardirqs_on+0x1e/0xd0
? __pfx_wq_barrier_func+0x10/0x10
flush_delayed_work+0x5d/0xa0
dev_coredump_put+0x63/0xa0
xe_driver_devcoredump_fini+0x12/0x20 [xe]
devm_action_release+0x12/0x30
release_nodes+0x3a/0x120
devres_release_all+0x8a/0xd0
device_unbind_cleanup+0x12/0x80
device_release_driver_internal+0x23a/0x280
? bus_find_device+0xa8/0xe0
device_driver_detach+0x14/0x20
unbind_store+0xaf/0xc0
drv_attr_store+0x21/0x50
sysfs_kf_write+0x4a/0x80
kernfs_fop_write_iter+0x169/0x220
vfs_write+0x293/0x560
ksys_write+0x72/0xf0
__x64_sys_write+0x19/0x30
x64_sys_call+0x2bf/0x2660
do_syscall_64+0x93/0xb60
? __f_unlock_pos+0x15/0x20
? __x64_sys_getdents64+0x9b/0x130
? __pfx_filldir64+0x10/0x10
? do_syscall_64+0x1a2/0xb60
? clear_bhb_loop+0x30/0x80
? clear_bhb_loop+0x30/0x80
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x76e292edd574
Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d d5 ea 0e 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 55 48 89 e5 48 83 ec 20 48 89
RSP: 002b:00007fffe247a828 EFLAGS: 00000202 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000076e292edd574
RDX: 000000000000000c RSI: 00006267f6306063 RDI: 000000000000000b
RBP: 000000000000000c R08: 000076e292fc4b20 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00006267f6306063
R13: 000000000000000b R14: 00006267e6859c00 R15: 000076e29322a000
</TASK>
xe 0000:03:00.0: [drm] Xe device coredump has been deleted.
Fixes: 01daccf74832 ("devcoredump : Serialize devcd_del work")
Cc: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: stable@vger.kernel.org # v6.1+
Signed-off-by: Maarten Lankhorst <dev@lankhorst.se>
Cc: Matthew Brost <matthew.brost@intel.com>
Acked-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250723142416.1020423-1-dev@lankhorst.se
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ replaced disable_delayed_work_sync() with cancel_delayed_work_sync() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 630785bfbe12c3ee3ebccd8b530a98d632b7e39d ]
The deprecation of the 'attr2' mount option in 6.18 wasn't entirely
successful because nobody noticed that the kernel never printed a
warning about attr2 being set in fstab if the only xfs filesystem is the
root fs; the initramfs mounts the root fs with no mount options; and the
init scripts only conveyed the fstab options by remounting the root fs.
Fix this by making it complain all the time.
Cc: stable@vger.kernel.org # v5.13
Fixes: 92cf7d36384b99 ("xfs: Skip repetitive warnings about mount options")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
[ Update existing xfs_fs_warn_deprecated() callers ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2eead19334516c8e9927c11b448fbe512b1f18a1 ]
Fix incorrect use of PTR_ERR_OR_ZERO() in topology_parse_cpu_capacity()
which causes the code to proceed with NULL clock pointers. The current
logic uses !PTR_ERR_OR_ZERO(cpu_clk) which evaluates to true for both
valid pointers and NULL, leading to potential NULL pointer dereference
in clk_get_rate().
Per include/linux/err.h documentation, PTR_ERR_OR_ZERO(ptr) returns:
"The error code within @ptr if it is an error pointer; 0 otherwise."
This means PTR_ERR_OR_ZERO() returns 0 for both valid pointers AND NULL
pointers. Therefore !PTR_ERR_OR_ZERO(cpu_clk) evaluates to true (proceed)
when cpu_clk is either valid or NULL, causing clk_get_rate(NULL) to be
called when of_clk_get() returns NULL.
Replace with !IS_ERR_OR_NULL(cpu_clk) which only proceeds for valid
pointers, preventing potential NULL pointer dereference in clk_get_rate().
Cc: stable <stable@kernel.org>
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Fixes: b8fe128dad8f ("arch_topology: Adjust initial CPU capacities with current freq")
Link: https://patch.msgid.link/20250923174308.1771906-1-kaushlendra.kumar@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 2c27aaee934a1b5229152fe33a14f1fdf50da143 ]
Do read-modify-write so that we re-use the characterized reset value as
specified in TRM [1] to program calibration wait time which defines number
of cycles to wait for after startup state machine is in bandgap enable
state.
This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's
AM62L and J721E SoC since earlier calibration wait time was getting
overwritten to zero value thus failing the PLL to lockup and causing
timeout.
[1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2):
Link: https://www.ti.com/lit/pdf/spruj83
Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4b5 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit a7075f501bd33c93570af759b6f4302ef0175168 ]
There was backward compatibility in the terms of mailbox API. Various
drivers from various OSes supporting 10G adapters from Intel portfolio
could easily negotiate mailbox API.
This convention has been broken since introducing API 1.4.
Commit 0062e7cc955e ("ixgbevf: add VF IPsec offload code") added support
for IPSec which is specific only for the kernel ixgbe driver. None of the
rest of the Intel 10G PF/VF drivers supports it. And actually lack of
support was not included in the IPSec implementation - there were no such
code paths. No possibility to negotiate support for the feature was
introduced along with introduction of the feature itself.
Commit 339f28964147 ("ixgbevf: Add support for new mailbox communication
between PF and VF") increasing API version to 1.5 did the same - it
introduced code supported specifically by the PF ESX driver. It altered API
version for the VF driver in the same time not touching the version
defined for the PF ixgbe driver. It led to additional discrepancies,
as the code provided within API 1.6 cannot be supported for Linux ixgbe
driver as it causes crashes.
The issue was noticed some time ago and mitigated by Jake within the commit
d0725312adf5 ("ixgbevf: stop attempting IPSEC offload on Mailbox API 1.5").
As a result we have regression for IPsec support and after increasing API
to version 1.6 ixgbevf driver stopped to support ESX MBX.
To fix this mess add new mailbox op asking PF driver about supported
features. Basing on a response determine whether to set support for IPSec
and ESX-specific enhanced mailbox.
New mailbox op, for compatibility purposes, must be added within new API
revision, as API version of OOT PF & VF drivers is already increased to
1.6 and doesn't incorporate features negotiate op.
Features negotiation mechanism gives possibility to be extended with new
features when needed in the future.
Reported-by: Jacob Keller <jacob.e.keller@intel.com>
Closes: https://lore.kernel.org/intel-wired-lan/20241101-jk-ixgbevf-mailbox-v1-5-fixes-v1-0-f556dc9a66ed@intel.com/
Fixes: 0062e7cc955e ("ixgbevf: add VF IPsec offload code")
Fixes: 339f28964147 ("ixgbevf: Add support for new mailbox communication between PF and VF")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-4-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 53f0eb62b4d23d40686f2dd51776b8220f2887bb ]
E610 adapters no longer use the VFLINKS register to read PF's link
speed and linkup state. As a result VF driver cannot get actual link
state and it incorrectly reports 10G which is the default option.
It leads to a situation where even 1G adapters print 10G as actual
link speed. The same happens when PF driver set speed different than 10G.
Add new mailbox operation to let the VF driver request a PF driver
to provide actual link data. Update the mailbox api to v1.6.
Incorporate both ways of getting link status within the legacy
ixgbe_check_mac_link_vf() function.
Fixes: 4c44b450c69b ("ixgbevf: Add support for Intel(R) E610 device")
Co-developed-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com>
Signed-off-by: Andrzej Wilczynski <andrzejx.wilczynski@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20251009-jk-iwl-net-2025-10-01-v3-2-ef32a425b92a@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by negotiating supported features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4c44b450c69b676955c2790dcf467c1f969d80f1 ]
Add support for Intel(R) E610 Series of network devices. The E610
is based on X550 but adds firmware managed link, enhanced security
capabilities and support for updated server manageability
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by negotiating supported features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 208fff3f567e2a3c3e7e4788845e90245c3891b4 ]
PCI_VDEVICE_SUB generates the pci_device_id struct layout for
the specific PCI device/subdevice. Private data may follow the
output.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Piotr Kwapulinski <piotr.kwapulinski@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Stable-dep-of: a7075f501bd3 ("ixgbevf: fix mailbox API compatibility by negotiating supported features")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 9d5c4f5c7a2c7677e1b3942772122b032c265aae ]
Assuming the disk layout as below,
disk0: 0 --- 0x00035abfff
disk1: 0x00035ac000 --- 0x00037abfff
disk2: 0x00037ac000 --- 0x00037ebfff
and we want to read data from offset=13568 having len=128 across the block
devices, we can illustrate the block addresses like below.
0 .. 0x00037ac000 ------------------- 0x00037ebfff, 0x00037ec000 -------
| ^ ^ ^
| fofs 0 13568 13568+128
| ------------------------------------------------------
| LBA 0x37e8aa9 0x37ebfa9 0x37ec029
--- map 0x3caa9 0x3ffa9
In this example, we should give the relative map of the target block device
ranging from 0x3caa9 to 0x3ffa9 where the length should be calculated by
0x37ebfff + 1 - 0x37ebfa9.
In the below equation, however, map->m_pblk was supposed to be the original
address instead of the one from the target block address.
- map->m_len = min(map->m_len, dev->end_blk + 1 - map->m_pblk);
Cc: stable@vger.kernel.org
Fixes: 71f2c8206202 ("f2fs: multidevice: support direct IO")
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 0094e98bd1477a6b7d97c25b47b19a7317c35279 ]
Add a helper to deal with everything needed to return a f2fs_map_blocks
structure based on a lookup in the extent cache.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 9d5c4f5c7a2c ("f2fs: fix wrong block mapping for multi-devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cd8fc5226bef3a1fda13a0e61794a039ca46744a ]
The create argument is always identicaly to map->m_may_create, so use
that consistently.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 9d5c4f5c7a2c ("f2fs: fix wrong block mapping for multi-devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit cf342d3beda000b4c60990755ca7800de5038785 ]
This allows to keep the f2fs_do_map_lock based locking scheme
private to data.c.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Stable-dep-of: 9d5c4f5c7a2c ("f2fs: fix wrong block mapping for multi-devices")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 42f9c66a6d0cc45758dab77233c5460e1cf003df ]
Tegra already defines all BARs except BAR0 as BAR_RESERVED. This is
sufficient for pci-epf-test to not allocate backing memory and to not call
set_bar() for those BARs. However, marking a BAR as BAR_RESERVED does not
mean that the BAR gets disabled.
The host side driver, pci_endpoint_test, simply does an ioremap for all
enabled BARs and will run tests against all enabled BARs, so it will run
tests against the BARs marked as BAR_RESERVED.
After running the BAR tests (which will write to all enabled BARs), the
inbound address translation is broken. This is because the tegra controller
exposes the ATU Port Logic Structure in BAR4, so when BAR4 is written, the
inbound address translation settings get overwritten.
To avoid this, implement the dw_pcie_ep_ops .init() callback and start off
by disabling all BARs (pci-epf-test will later enable/configure BARs that
are not defined as BAR_RESERVED).
This matches the behavior of other PCIe endpoint drivers: dra7xx, imx6,
layerscape-ep, artpec6, dw-rockchip, qcom-ep, rcar-gen4, and uniphier-ep.
With this, the PCI endpoint kselftest test case CONSECUTIVE_BAR_TEST (which
was specifically made to detect address translation issues) passes.
Fixes: c57247f940e8 ("PCI: tegra: Add support for PCIe endpoint mode in Tegra194")
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250922140822.519796-7-cassel@kernel.org
[ changed .init field to .ep_init in pcie_ep_ops struct ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 5801e65206b065b0b2af032f7f1eef222aa2fd83 ]
When adding dependencies with drm_sched_job_add_dependency(), that
function consumes the fence reference both on success and failure, so in
the latter case the dma_fence_put() on the error path (xarray failed to
expand) is a double free.
Interestingly this bug appears to have been present ever since
commit ebd5f74255b9 ("drm/sched: Add dependency tracking"), since the code
back then looked like this:
drm_sched_job_add_implicit_dependencies():
...
for (i = 0; i < fence_count; i++) {
ret = drm_sched_job_add_dependency(job, fences[i]);
if (ret)
break;
}
for (; i < fence_count; i++)
dma_fence_put(fences[i]);
Which means for the failing 'i' the dma_fence_put was already a double
free. Possibly there were no users at that time, or the test cases were
insufficient to hit it.
The bug was then only noticed and fixed after
commit 9c2ba265352a ("drm/scheduler: use new iterator in drm_sched_job_add_implicit_dependencies v2")
landed, with its fixup of
commit 4eaf02d6076c ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies").
At that point it was a slightly different flavour of a double free, which
commit 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
noticed and attempted to fix.
But it only moved the double free from happening inside the
drm_sched_job_add_dependency(), when releasing the reference not yet
obtained, to the caller, when releasing the reference already released by
the former in the failure case.
As such it is not easy to identify the right target for the fixes tag so
lets keep it simple and just continue the chain.
While fixing we also improve the comment and explain the reason for taking
the reference and not dropping it.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Fixes: 963d0b356935 ("drm/scheduler: fix drm_sched_job_add_implicit_dependencies harder")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/dri-devel/aNFbXq8OeYl3QSdm@stanley.mountain/
Cc: Christian König <christian.koenig@amd.com>
Cc: Rob Clark <robdclark@chromium.org>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: Philipp Stanner <phasta@kernel.org>
Cc: Christian König <ckoenig.leichtzumerken@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org # v5.16+
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20251015084015.6273-1-tvrtko.ursulin@igalia.com
[ applied to drm_sched_job_add_implicit_dependencies instead of drm_sched_job_add_resv_dependencies ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 8ecb790ea8c3fc69e77bace57f14cf0d7c177bd8 ]
Unlike other strings in the ext4 superblock, we rely on tune2fs to
make sure s_mount_opts is NUL terminated. Harden
parse_apply_sb_mount_options() by treating s_mount_opts as a potential
__nonstring.
Cc: stable@vger.kernel.org
Fixes: 8b67f04ab9de ("ext4: Add mount options in superblock")
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Message-ID: <20250916-tune2fs-v2-1-d594dc7486f0@mit.edu>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
[ added sizeof() third argument to strscpy_pad() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 4b47a8601b71ad98833b447d465592d847b4dc77 ]
Avoid a crash if a pNFS client should happen to send a LAYOUTCOMMIT
operation on a FlexFiles layout.
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/linux-nfs/152f99b2-ba35-4dec-93a9-4690e625dccd@oracle.com/T/#t
Cc: Thomas Haynes <loghyr@hammerspace.com>
Cc: stable@vger.kernel.org
Fixes: 9b9960a0ca47 ("nfsd: Add a super simple flex file server")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ removed struct svc_rqst parameter from nfsd4_ff_proc_layoutcommit ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 56094ad3eaa21e6621396cc33811d8f72847a834 ]
When user calls open_by_handle_at() on some inode that is not cached, we
will create disconnected dentry for it. If such dentry is a directory,
exportfs_decode_fh_raw() will then try to connect this dentry to the
dentry tree through reconnect_path(). It may happen for various reasons
(such as corrupted fs or race with rename) that the call to
lookup_one_unlocked() in reconnect_one() will fail to find the dentry we
are trying to reconnect and instead create a new dentry under the
parent. Now this dentry will not be marked as disconnected although the
parent still may well be disconnected (at least in case this
inconsistency happened because the fs is corrupted and .. doesn't point
to the real parent directory). This creates inconsistency in
disconnected flags but AFAICS it was mostly harmless. At least until
commit f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon")
which removed adding of most disconnected dentries to sb->s_anon list.
Thus after this commit cleanup of disconnected dentries implicitely
relies on the fact that dput() will immediately reclaim such dentries.
However when some leaf dentry isn't marked as disconnected, as in the
scenario described above, the reclaim doesn't happen and the dentries
are "leaked". Memory reclaim can eventually reclaim them but otherwise
they stay in memory and if umount comes first, we hit infamous "Busy
inodes after unmount" bug. Make sure all dentries created under a
disconnected parent are marked as disconnected as well.
Reported-by: syzbot+1d79ebe5383fc016cf07@syzkaller.appspotmail.com
Fixes: f1ee616214cb ("VFS: don't keep disconnected dentries on d_anon")
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ relocated DCACHE_DISCONNECTED propagation from d_alloc_parallel() to d_alloc() ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit d68886bae76a4b9b3484d23e5b7df086f940fa38 ]
The data type of loca_last_write_offset is newoffset4 and is switched
on a boolean value, no_newoffset, that indicates if a previous write
occurred or not. If no_newoffset is FALSE, an offset is not given.
This means that client does not try to update the file size. Thus,
server should not try to calculate new file size and check if it fits
into the segment range. See RFC 8881, section 12.5.4.2.
Sometimes the current incorrect logic may cause clients to hang when
trying to sync an inode. If layoutcommit fails, the client marks the
inode as dirty again.
Fixes: 9cf514ccfacb ("nfsd: implement pNFS operations")
Cc: stable@vger.kernel.org
Co-developed-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Konstantin Evtushenko <koevtushenko@yandex.com>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[ removed rqstp parameter from proc_layoutcommit ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 274365a51d88658fb51cca637ba579034e90a799 ]
Remove dprintk in nfsd4_layoutcommit. These are not needed
in day to day usage, and the information is also available
in Wireshark when capturing NFS traffic.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: d68886bae76a ("NFSD: Fix last write offset handling in layoutcommit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit 832738e4b325b742940761e10487403f9aad13e8 ]
Compilers may optimize the layout of C structures, so we should not rely
on sizeof struct and memcpy to encode and decode XDR structures. The byte
order of the fields should also be taken into account.
This patch adds the correct functions to handle the deviceid4 structure
and removes the pad field, which is currently not used by NFSD, from the
runtime state. The server's byte order is preserved because the deviceid4
blob on the wire is only used as a cookie by the client.
Signed-off-by: Sergey Bashirov <sergeybashirov@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Stable-dep-of: d68886bae76a ("NFSD: Fix last write offset handling in layoutcommit")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
