summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2025-09-19Linux 6.1.153v6.1.153Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20250917123329.576087662@linuxfoundation.org Tested-by: Hardik Garg <hargar@linux.microsoft.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Peter Schneider <pschneider1968@googlemail.com> Tested-by: Brett A C Sheffield <bacs@librecast.net> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19net: hsr: hsr_slave: Fix the promiscuous mode in offload modeRavi Gunasekaran1-1/+2
commit b11c81731c810efe592e510bb0110e0db6877419 upstream. commit e748d0fd66ab ("net: hsr: Disable promiscuous mode in offload mode") disables promiscuous mode of slave devices while creating an HSR interface. But while deleting the HSR interface, it does not take care of it. It decreases the promiscuous mode count, which eventually enables promiscuous mode on the slave devices when creating HSR interface again. Fix this by not decrementing the promiscuous mode count while deleting the HSR interface when offload is enabled. Fixes: e748d0fd66ab ("net: hsr: Disable promiscuous mode in offload mode") Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240322100447.27615-1-r-gunasekaran@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19soc: qcom: mdt_loader: Deal with zero e_shentsizeBjorn Andersson1-5/+7
commit 25daf9af0ac1bf12490b723b5efaf8dcc85980bc upstream. Firmware that doesn't provide section headers leave both e_shentsize and e_shnum 0, which obvious isn't compatible with the newly introduced stricter checks. Make the section-related checks conditional on either of these values being non-zero. Fixes: 9f9967fed9d0 ("soc: qcom: mdt_loader: Ensure we don't read past the ELF header") Reported-by: Val Packett <val@packett.cool> Closes: https://lore.kernel.org/all/ece307c3-7d65-440f-babd-88cf9705b908@packett.cool/ Reported-by: Neil Armstrong <neil.armstrong@linaro.org> Closes: https://lore.kernel.org/all/aec9cd03-6fc2-4dc8-b937-8b7cf7bf4128@linaro.org/ Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com> Fixes: 9f35ab0e53cc ("soc: qcom: mdt_loader: Fix error return values in mdt_header_valid()") Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-QRD Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250730-mdt-loader-shentsize-zero-v1-1-04f43186229c@oss.qualcomm.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Cc: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19soc: qcom: mdt_loader: Fix error return values in mdt_header_valid()Dan Carpenter1-2/+2
commit 9f35ab0e53ccbea57bb9cbad8065e0406d516195 upstream. This function is supposed to return true for valid headers and false for invalid. In a couple places it returns -EINVAL instead which means the invalid headers are counted as true. Change it to return false. Fixes: 9f9967fed9d0 ("soc: qcom: mdt_loader: Ensure we don't read past the ELF header") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/db57c01c-bdcc-4a0f-95db-b0f2784ea91f@sabinyo.mountain Signed-off-by: Bjorn Andersson <andersson@kernel.org> Cc: Yongqin Liu <yongqin.liu@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19drm/i915/power: fix size for for_each_set_bit() in abox iterationJani Nikula1-3/+3
[ Upstream commit cfa7b7659757f8d0fc4914429efa90d0d2577dd7 ] for_each_set_bit() expects size to be in bits, not bytes. The abox mask iteration uses bytes, but it works by coincidence, because the local variable holding the mask is unsigned long, and the mask only ever has bit 2 as the highest bit. Using a smaller type could lead to subtle and very hard to track bugs. Fixes: 62afef2811e4 ("drm/i915/rkl: RKL uses ABOX0 for pixel transfers") Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: stable@vger.kernel.org # v5.9+ Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://lore.kernel.org/r/20250905104149.1144751-1-jani.nikula@intel.com Signed-off-by: Jani Nikula <jani.nikula@intel.com> (cherry picked from commit 7ea3baa6efe4bb93d11e1c0e6528b1468d7debf6) Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net> [ adapted struct intel_display *display parameters to struct drm_i915_private *dev_priv ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19drm/amdgpu: fix a memory leak in fence cleanup when unloadingAlex Deucher1-3/+0
[ Upstream commit 7838fb5f119191403560eca2e23613380c0e425e ] Commit b61badd20b44 ("drm/amdgpu: fix usage slab after free") reordered when amdgpu_fence_driver_sw_fini() was called after that patch, amdgpu_fence_driver_sw_fini() effectively became a no-op as the sched entities we never freed because the ring pointers were already set to NULL. Remove the NULL setting. Reported-by: Lin.Cao <lincao12@amd.com> Cc: Vitaly Prosyak <vitaly.prosyak@amd.com> Cc: Christian König <christian.koenig@amd.com> Fixes: b61badd20b44 ("drm/amdgpu: fix usage slab after free") Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit a525fa37aac36c4591cc8b07ae8957862415fbd5) Cc: stable@vger.kernel.org [ Adapt to conditional check ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19phy: ti-pipe3: fix device leak at unbindJohan Hovold1-0/+13
commit e19bcea99749ce8e8f1d359f68ae03210694ad56 upstream. Make sure to drop the reference to the control device taken by of_find_device_by_node() during probe when the driver is unbound. Fixes: 918ee0d21ba4 ("usb: phy: omap-usb3: Don't use omap_get_control_dev()") Cc: stable@vger.kernel.org # 3.13 Cc: Roger Quadros <rogerq@kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20250724131206.2211-4-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19phy: tegra: xusb: fix device and OF node leak at probeJohan Hovold1-1/+5
commit bca065733afd1e3a89a02f05ffe14e966cd5f78e upstream. Make sure to drop the references taken to the PMC OF node and device by of_parse_phandle() and of_find_device_by_node() during probe. Note the holding a reference to the PMC device does not prevent the PMC regmap from going away (e.g. if the PMC driver is unbound) so there is no need to keep the reference. Fixes: 2d1021487273 ("phy: tegra: xusb: Add wake/sleepwalk for Tegra210") Cc: stable@vger.kernel.org # 5.14 Cc: JC Kuo <jckuo@nvidia.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20250724131206.2211-2-johan@kernel.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19dmaengine: dw: dmamux: Fix device reference leak in rzn1_dmamux_route_allocateMiaoqian Lin1-4/+11
commit aa2e1e4563d3ab689ffa86ca1412ecbf9fd3b308 upstream. The reference taken by of_find_device_by_node() must be released when not needed anymore. Add missing put_device() call to fix device reference leaks. Fixes: 134d9c52fca2 ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support") Cc: stable@vger.kernel.org Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20250902090358.2423285-1-linmq006@gmail.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19dmaengine: qcom: bam_dma: Fix DT error handling for num-channels/eesStephan Gerhold1-2/+6
commit 5068b5254812433e841a40886e695633148d362d upstream. When we don't have a clock specified in the device tree, we have no way to ensure the BAM is on. This is often the case for remotely-controlled or remotely-powered BAM instances. In this case, we need to read num-channels from the DT to have all the necessary information to complete probing. However, at the moment invalid device trees without clock and without num-channels still continue probing, because the error handling is missing return statements. The driver will then later try to read the number of channels from the registers. This is unsafe, because it relies on boot firmware and lucky timing to succeed. Unfortunately, the lack of proper error handling here has been abused for several Qualcomm SoCs upstream, causing early boot crashes in several situations [1, 2]. Avoid these early crashes by erroring out when any of the required DT properties are missing. Note that this will break some of the existing DTs upstream (mainly BAM instances related to the crypto engine). However, clearly these DTs have never been tested properly, since the error in the kernel log was just ignored. It's safer to disable the crypto engine for these broken DTBs. [1]: https://lore.kernel.org/r/CY01EKQVWE36.B9X5TDXAREPF@fairphone.com/ [2]: https://lore.kernel.org/r/20230626145959.646747-1-krzysztof.kozlowski@linaro.org/ Cc: stable@vger.kernel.org Fixes: 48d163b1aa6e ("dmaengine: qcom: bam_dma: get num-channels and num-ees from dt") Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> Link: https://lore.kernel.org/r/20250212-bam-dma-fixes-v1-8-f560889e65d8@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19USB: gadget: dummy-hcd: Fix locking bug in RT-enabled kernelsAlan Stern1-4/+4
commit 8d63c83d8eb922f6c316320f50c82fa88d099bea upstream. Yunseong Kim and the syzbot fuzzer both reported a problem in RT-enabled kernels caused by the way dummy-hcd mixes interrupt management and spin-locking. The pattern was: local_irq_save(flags); spin_lock(&dum->lock); ... spin_unlock(&dum->lock); ... // calls usb_gadget_giveback_request() local_irq_restore(flags); The code was written this way because usb_gadget_giveback_request() needs to be called with interrupts disabled and the private lock not held. While this pattern works fine in non-RT kernels, it's not good when RT is enabled. RT kernels handle spinlocks much like mutexes; in particular, spin_lock() may sleep. But sleeping is not allowed while local interrupts are disabled. To fix the problem, rewrite the code to conform to the pattern used elsewhere in dummy-hcd and other UDC drivers: spin_lock_irqsave(&dum->lock, flags); ... spin_unlock(&dum->lock); usb_gadget_giveback_request(...); spin_lock(&dum->lock); ... spin_unlock_irqrestore(&dum->lock, flags); This approach satisfies the RT requirements. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Fixes: b4dbda1a22d2 ("USB: dummy-hcd: disable interrupts during req->complete") Reported-by: Yunseong Kim <ysk@kzalloc.com> Closes: <https://lore.kernel.org/linux-usb/5b337389-73b9-4ee4-a83e-7e82bf5af87a@kzalloc.com/> Reported-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com Closes: <https://lore.kernel.org/linux-usb/68ac2411.050a0220.37038e.0087.GAE@google.com/> Tested-by: syzbot+8baacc4139f12fa77909@syzkaller.appspotmail.com CC: Sebastian Andrzej Siewior <bigeasy@linutronix.de> CC: stable@vger.kernel.org Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/bb192ae2-4eee-48ee-981f-3efdbbd0d8f0@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19hrtimers: Unconditionally update target CPU base after offline timer migrationXiongfeng Wang1-8/+3
[ Upstream commit e895f8e29119c8c966ea794af9e9100b10becb88 ] When testing softirq based hrtimers on an ARM32 board, with high resolution mode and NOHZ inactive, softirq based hrtimers fail to expire after being moved away from an offline CPU: CPU0 CPU1 hrtimer_start(..., HRTIMER_MODE_SOFT); cpu_down(CPU1) ... hrtimers_cpu_dying() // Migrate timers to CPU0 smp_call_function_single(CPU0, returgger_next_event); retrigger_next_event() if (!highres && !nohz) return; As retrigger_next_event() is a NOOP when both high resolution timers and NOHZ are inactive CPU0's hrtimer_cpu_base::softirq_expires_next is not updated and the migrated softirq timers never expire unless there is a softirq based hrtimer queued on CPU0 later. Fix this by removing the hrtimer_hres_active() and tick_nohz_active() check in retrigger_next_event(), which enforces a full update of the CPU base. As this is not a fast path the extra cost does not matter. [ tglx: Massaged change log ] Fixes: 5c0930ccaad5 ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") Co-developed-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Frederic Weisbecker <frederic@kernel.org> Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/all/20250805081025.54235-1-wangxiongfeng2@huawei.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19hrtimer: Rename __hrtimer_hres_active() to hrtimer_hres_active()Jiapeng Chong1-13/+8
[ Upstream commit b7c8e1f8a7b4352c1d0b4310686385e3cf6c104a ] The function hrtimer_hres_active() are defined in the hrtimer.c file, but not called elsewhere, so rename __hrtimer_hres_active() to hrtimer_hres_active() and remove the old hrtimer_hres_active() function. kernel/time/hrtimer.c:653:19: warning: unused function 'hrtimer_hres_active'. Fixes: 82ccdf062a64 ("hrtimer: Remove unused function") Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Link: https://lore.kernel.org/r/20240418023000.130324-1-jiapeng.chong@linux.alibaba.com Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8778 Stable-dep-of: e895f8e29119 ("hrtimers: Unconditionally update target CPU base after offline timer migration") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19hrtimer: Remove unused functionJiapeng Chong1-19/+1
[ Upstream commit 82ccdf062a64f3c4ac575c16179ce68edbbbe8e4 ] The function is defined, but not called anywhere: kernel/time/hrtimer.c:1880:20: warning: unused function '__hrtimer_peek_ahead_timers'. Remove it. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20240322070441.29646-1-jiapeng.chong@linux.alibaba.com Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8611 Stable-dep-of: e895f8e29119 ("hrtimers: Unconditionally update target CPU base after offline timer migration") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19regulator: sy7636a: fix lifecycle of power good gpioAndreas Kemnade1-3/+4
[ Upstream commit c05d0b32eebadc8be6e53196e99c64cf2bed1d99 ] Attach the power good gpio to the regulator device devres instead of the parent device to fix problems if probe is run multiple times (rmmod/insmod or some deferral). Fixes: 8c485bedfb785 ("regulator: sy7636a: Initial commit") Signed-off-by: Andreas Kemnade <akemnade@kernel.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Peng Fan <peng.fan@nxp.com> Message-ID: <20250906-sy7636-rsrc-v1-2-e2886a9763a7@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19dmaengine: ti: edma: Fix memory allocation size for queue_priority_mapAnders Roxell1-2/+2
[ Upstream commit e63419dbf2ceb083c1651852209c7f048089ac0f ] Fix a critical memory allocation bug in edma_setup_from_hw() where queue_priority_map was allocated with insufficient memory. The code declared queue_priority_map as s8 (*)[2] (pointer to array of 2 s8), but allocated memory using sizeof(s8) instead of the correct size. This caused out-of-bounds memory writes when accessing: queue_priority_map[i][0] = i; queue_priority_map[i][1] = i; The bug manifested as kernel crashes with "Oops - undefined instruction" on ARM platforms (BeagleBoard-X15) during EDMA driver probe, as the memory corruption triggered kernel hardening features on Clang. Change the allocation to use sizeof(*queue_priority_map) which automatically gets the correct size for the 2D array structure. Fixes: 2b6b3b742019 ("ARM/dmaengine: edma: Merge the two drivers under drivers/dma/") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Link: https://lore.kernel.org/r/20250830094953.3038012-1-anders.roxell@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19dmaengine: idxd: Fix double free in idxd_setup_wqs()Dan Carpenter1-16/+17
[ Upstream commit 39aaa337449e71a41d4813be0226a722827ba606 ] The clean up in idxd_setup_wqs() has had a couple bugs because the error handling is a bit subtle. It's simpler to just re-write it in a cleaner way. The issues here are: 1) If "idxd->max_wqs" is <= 0 then we call put_device(conf_dev) when "conf_dev" hasn't been initialized. 2) If kzalloc_node() fails then again "conf_dev" is invalid. It's either uninitialized or it points to the "conf_dev" from the previous iteration so it leads to a double free. It's better to free partial loop iterations within the loop and then the unwinding at the end can handle whole loop iterations. I also renamed the labels to describe what the goto does and not where the goto was located. Fixes: 3fd2f4bc010c ("dmaengine: idxd: fix memory leak in error handling path of idxd_setup_wqs") Reported-by: Colin Ian King <colin.i.king@gmail.com> Closes: https://lore.kernel.org/all/20250811095836.1642093-1-colin.i.king@gmail.com/ Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/aJnJW3iYTDDCj9sk@stanley.mountain Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19hsr: use hsr_for_each_port_rtnl in hsr_port_get_hsrHangbin Liu2-1/+4
[ Upstream commit 393c841fe4333cdd856d0ca37b066d72746cfaa6 ] hsr_port_get_hsr() iterates over ports using hsr_for_each_port(), but many of its callers do not hold the required RCU lock. Switch to hsr_for_each_port_rtnl(), since most callers already hold the rtnl lock. After review, all callers are covered by either the rtnl lock or the RCU lock, except hsr_dev_xmit(). Fix this by adding an RCU read lock there. Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-3-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19hsr: use rtnl lock when iterating over portsHangbin Liu3-10/+13
[ Upstream commit 8884c693991333ae065830554b9b0c96590b1bb2 ] hsr_for_each_port is called in many places without holding the RCU read lock, this may trigger warnings on debug kernels. Most of the callers are actually hold rtnl lock. So add a new helper hsr_for_each_port_rtnl to allow callers in suitable contexts to iterate ports safely without explicit RCU locking. This patch only fixed the callers that is hold rtnl lock. Other caller issues will be fixed in later patches. Fixes: c5a759117210 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20250905091533.377443-2-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19net: hsr: Add VLAN CTAG filter supportMurali Karicheri1-1/+79
[ Upstream commit 1a8a63a5305e95519de6f941922dfcd8179f82e5 ] This patch adds support for VLAN ctag based filtering at slave devices. The slave ethernet device may be capable of filtering ethernet packets based on VLAN ID. This requires that when the VLAN interface is created over an HSR/PRP interface, it passes the VID information to the associated slave ethernet devices so that it updates the hardware filters to filter ethernet frames based on VID. This patch adds the required functions to propagate the vid information to the slave devices. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: MD Danish Anwar <danishanwar@ti.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20241106091710.3308519-3-danishanwar@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 8884c6939913 ("hsr: use rtnl lock when iterating over ports") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19net: hsr: Add support for MC filtering at the slave deviceMurali Karicheri1-1/+66
[ Upstream commit 36b20fcdd9663ced36d3aef96f0eff8eb79de4b8 ] When MC (multicast) list is updated by the networking layer due to a user command and as well as when allmulti flag is set, it needs to be passed to the enslaved Ethernet devices. This patch allows this to happen by implementing ndo_change_rx_flags() and ndo_set_rx_mode() API calls that in turns pass it to the slave devices using existing API calls. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: 8884c6939913 ("hsr: use rtnl lock when iterating over ports") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19net: hsr: Disable promiscuous mode in offload modeRavi Gunasekaran3-4/+17
[ Upstream commit e748d0fd66abc4b1c136022e4e053004fce2b792 ] When port-to-port forwarding for interfaces in HSR node is enabled, disable promiscuous mode since L2 frame forward happens at the offloaded hardware. Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230614114710.31400-1-r-gunasekaran@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 8884c6939913 ("hsr: use rtnl lock when iterating over ports") Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19can: xilinx_can: xcan_write_frame(): fix use-after-free of transmitted SKBAnssi Hannula1-8/+8
[ Upstream commit ef79f00be72bd81d2e1e6f060d83cf7e425deee4 ] can_put_echo_skb() takes ownership of the SKB and it may be freed during or after the call. However, xilinx_can xcan_write_frame() keeps using SKB after the call. Fix that by only calling can_put_echo_skb() after the code is done touching the SKB. The tx_lock is held for the entire xcan_write_frame() execution and also on the can_get_echo_skb() side so the order of operations does not matter. An earlier fix commit 3d3c817c3a40 ("can: xilinx_can: Fix usage of skb memory") did not move the can_put_echo_skb() call far enough. Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Fixes: 1598efe57b3e ("can: xilinx_can: refactor code in preparation for CAN FD support") Link: https://patch.msgid.link/20250822095002.168389-1-anssi.hannula@bitwise.fi [mkl: add "commit" in front of sha1 in patch description] [mkl: fix indention] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19can: j1939: j1939_local_ecu_get(): undo increment when j1939_local_ecu_get() ↵Tetsuo Handa1-1/+4
fails [ Upstream commit 06e02da29f6f1a45fc07bd60c7eaf172dc21e334 ] Since j1939_sk_bind() and j1939_sk_release() call j1939_local_ecu_put() when J1939_SOCK_BOUND was already set, but the error handling path for j1939_sk_bind() will not set J1939_SOCK_BOUND when j1939_local_ecu_get() fails, j1939_local_ecu_get() needs to undo priv->ents[sa].nusers++ when j1939_local_ecu_get() returns an error. Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/e7f80046-4ff7-4ce2-8ad8-7c3c678a42c9@I-love.SAKURA.ne.jp Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19can: j1939: j1939_sk_bind(): call j1939_priv_put() immediately when ↵Tetsuo Handa1-0/+3
j1939_local_ecu_get() failed [ Upstream commit f214744c8a27c3c1da6b538c232da22cd027530e ] Commit 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") expects that a call to j1939_priv_put() can be unconditionally delayed until j1939_sk_sock_destruct() is called. But a refcount leak will happen when j1939_sk_bind() is called again after j1939_local_ecu_get() from previous j1939_sk_bind() call returned an error. We need to call j1939_priv_put() before j1939_sk_bind() returns an error. Fixes: 25fe97cb7620 ("can: j1939: move j1939_priv_put() into sk_destruct callback") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://patch.msgid.link/4f49a1bc-a528-42ad-86c0-187268ab6535@I-love.SAKURA.ne.jp Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19i40e: fix IRQ freeing in i40e_vsi_request_irq_msix error pathMichal Schmidt1-1/+1
[ Upstream commit 915470e1b44e71d1dd07ee067276f003c3521ee3 ] If request_irq() in i40e_vsi_request_irq_msix() fails in an iteration later than the first, the error path wants to free the IRQs requested so far. However, it uses the wrong dev_id argument for free_irq(), so it does not free the IRQs correctly and instead triggers the warning: Trying to free already-free IRQ 173 WARNING: CPU: 25 PID: 1091 at kernel/irq/manage.c:1829 __free_irq+0x192/0x2c0 Modules linked in: i40e(+) [...] CPU: 25 UID: 0 PID: 1091 Comm: NetworkManager Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy) Hardware name: [...] RIP: 0010:__free_irq+0x192/0x2c0 [...] Call Trace: <TASK> free_irq+0x32/0x70 i40e_vsi_request_irq_msix.cold+0x63/0x8b [i40e] i40e_vsi_request_irq+0x79/0x80 [i40e] i40e_vsi_open+0x21f/0x2f0 [i40e] i40e_open+0x63/0x130 [i40e] __dev_open+0xfc/0x210 __dev_change_flags+0x1fc/0x240 netif_change_flags+0x27/0x70 do_setlink.isra.0+0x341/0xc70 rtnl_newlink+0x468/0x860 rtnetlink_rcv_msg+0x375/0x450 netlink_rcv_skb+0x5c/0x110 netlink_unicast+0x288/0x3c0 netlink_sendmsg+0x20d/0x430 ____sys_sendmsg+0x3a2/0x3d0 ___sys_sendmsg+0x99/0xe0 __sys_sendmsg+0x8a/0xf0 do_syscall_64+0x82/0x2c0 entry_SYSCALL_64_after_hwframe+0x76/0x7e [...] </TASK> ---[ end trace 0000000000000000 ]--- Use the same dev_id for free_irq() as for request_irq(). I tested this with inserting code to fail intentionally. Fixes: 493fb30011b3 ("i40e: Move q_vectors from pointer to array to array of pointers") Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Reviewed-by: Subbaraya Sundeep <sbhatta@marvell.com> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19igb: fix link test skipping when interface is admin downKohei Enju1-4/+1
[ Upstream commit d709f178abca22a4d3642513df29afe4323a594b ] The igb driver incorrectly skips the link test when the network interface is admin down (if_running == false), causing the test to always report PASS regardless of the actual physical link state. This behavior is inconsistent with other drivers (e.g. i40e, ice, ixgbe, etc.) which correctly test the physical link state regardless of admin state. Remove the if_running check to ensure link test always reflects the physical link state. Fixes: 8d420a1b3ea6 ("igb: correct link test not being run when link is down") Signed-off-by: Kohei Enju <enjuk@amazon.com> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Tested-by: Rinitha S <sx.rinitha@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19docs: networking: can: change bcm_msg_head frames member to support flexible ↵Alex Tran1-1/+1
array [ Upstream commit 641427d5bf90af0625081bf27555418b101274cd ] The documentation of the 'bcm_msg_head' struct does not match how it is defined in 'bcm.h'. Changed the frames member to a flexible array, matching the definition in the header file. See commit 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members") Signed-off-by: Alex Tran <alex.t.tran@gmail.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://patch.msgid.link/20250904031709.1426895-1-alex.t.tran@gmail.com Fixes: 94dfc73e7cf4 ("treewide: uapi: Replace zero-length arrays with flexible-array members") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217783 Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19tunnels: reset the GSO metadata before reusing the skbAntoine Tenart1-0/+6
[ Upstream commit e3c674db356c4303804b2415e7c2b11776cdd8c3 ] If a GSO skb is sent through a Geneve tunnel and if Geneve options are added, the split GSO skb might not fit in the MTU anymore and an ICMP frag needed packet can be generated. In such case the ICMP packet might go through the segmentation logic (and dropped) later if it reaches a path were the GSO status is checked and segmentation is required. This is especially true when an OvS bridge is used with a Geneve tunnel attached to it. The following set of actions could lead to the ICMP packet being wrongfully segmented: 1. An skb is constructed by the TCP layer (e.g. gso_type SKB_GSO_TCPV4, segs >= 2). 2. The skb hits the OvS bridge where Geneve options are added by an OvS action before being sent through the tunnel. 3. When the skb is xmited in the tunnel, the split skb does not fit anymore in the MTU and iptunnel_pmtud_build_icmp is called to generate an ICMP fragmentation needed packet. This is done by reusing the original (GSO!) skb. The GSO metadata is not cleared. 4. The ICMP packet being sent back hits the OvS bridge again and because skb_is_gso returns true, it goes through queue_gso_packets... 5. ...where __skb_gso_segment is called. The skb is then dropped. 6. Note that in the above example on re-transmission the skb won't be a GSO one as it would be segmented (len > MSS) and the ICMP packet should go through. Fix this by resetting the GSO information before reusing an skb in iptunnel_pmtud_build_icmp and iptunnel_pmtud_build_icmpv6. Fixes: 4cb47a8644cc ("tunnels: PMTU discovery support for directly bridged IP packets") Reported-by: Adrian Moreno <amorenoz@redhat.com> Signed-off-by: Antoine Tenart <atenart@kernel.org> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Link: https://patch.msgid.link/20250904125351.159740-1-atenart@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19net: fec: Fix possible NPD in fec_enet_phy_reset_after_clk_enable()Stefan Wahren1-1/+2
[ Upstream commit 03e79de4608bdd48ad6eec272e196124cefaf798 ] The function of_phy_find_device may return NULL, so we need to take care before dereferencing phy_dev. Fixes: 64a632da538a ("net: fec: Fix phy_device lookup for phy_reset_after_clk_enable()") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: Richard Leitner <richard.leitner@skidata.com> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Wei Fang <wei.fang@nxp.com> Link: https://patch.msgid.link/20250904091334.53965-1-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2025-09-19USB: serial: option: add Telit Cinterion LE910C4-WWX new compositionsFabio Porcedda1-0/+11
commit a5a261bea9bf8444300d1067b4a73bedee5b5227 upstream. Add the following Telit Cinterion LE910C4-WWX new compositions: 0x1034: tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1034 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1036: tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1036 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1037: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1037 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x1038: tty (Telit custom) + tty (AT) + tty (AT) + rmnet T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 9 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1038 Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x103b: tty (diag) + tty (Telit custom) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=103b Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms 0x103c: tty (Telit custom) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=103c Rev=00.00 S: Manufacturer=Telit S: Product=LE910C4-WWX S: SerialNumber=93f617e7 C: #Ifs= 3 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19USB: serial: option: add Telit Cinterion FN990A w/audio compositionsFabio Porcedda1-0/+6
commit cba70aff623b104085ab5613fedd21f6ea19095a upstream. Add the following Telit Cinterion FN990A w/audio compositions: 0x1077: tty (diag) + adb + rmnet + audio + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1077 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=67e04c35 C: #Ifs=10 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I: If#= 4 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=03(O) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 5 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms 0x1078: tty (diag) + adb + MBIM + audio + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1078 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=67e04c35 C: #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=10 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 3 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I: If#= 5 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio I: If#= 6 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms 0x1079: RNDIS + tty (diag) + adb + audio + tty (AT/NMEA) + tty (AT) + tty (AT) + tty (AT) T: Bus=01 Lev=01 Prnt=01 Port=09 Cnt=01 Dev#= 23 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1bc7 ProdID=1079 Rev=05.04 S: Manufacturer=Telit Wireless Solutions S: Product=FN990 S: SerialNumber=67e04c35 C: #Ifs=11 Cfg#= 1 Atr=e0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 1 Cls=ef(misc ) Sub=04 Prot=01 Driver=rndis_host E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#=10 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I: If#= 4 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=20 Driver=snd-usb-audio I: If#= 5 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio I: If#= 6 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=20 Driver=snd-usb-audio E: Ad=84(I) Atr=0d(Isoc) MxPS= 68 Ivl=1ms I: If#= 7 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 8 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=88(I) Atr=03(Int.) MxPS= 10 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8a(I) Atr=03(Int.) MxPS= 10 Ivl=32ms Cc: stable@vger.kernel.org Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19dt-bindings: serial: brcm,bcm7271-uart: Constrain clocksKrzysztof Kozlowski1-1/+1
commit ee047e1d85d73496541c54bd4f432c9464e13e65 upstream. Lists should have fixed constraints, because binding must be specific in respect to hardware, thus add missing constraints to number of clocks. Cc: stable <stable@kernel.org> Fixes: 88a499cd70d4 ("dt-bindings: Add support for the Broadcom UART driver") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250812121630.67072-2-krzysztof.kozlowski@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19serial: sc16is7xx: fix bug in flow control levels initHugo Villeneuve1-12/+2
commit 535fd4c98452c87537a40610abba45daf5761ec6 upstream. When trying to set MCR[2], XON1 is incorrectly accessed instead. And when writing to the TCR register to configure flow control levels, we are incorrectly writing to the MSR register. The default value of $00 is then used for TCR, which means that selectable trigger levels in FCR are used in place of TCR. TCR/TLR access requires EFR[4] (enable enhanced functions) and MCR[2] to be set. EFR[4] is already set in probe(). MCR access requires LCR[7] to be zero. Since LCR is set to $BF when trying to set MCR[2], XON1 is incorrectly accessed instead because MCR shares the same address space as XON1. Since MCR[2] is unmodified and still zero, when writing to TCR we are in fact writing to MSR because TCR/TLR registers share the same address space as MSR/SPR. Fix by first removing useless reconfiguration of EFR[4] (enable enhanced functions), as it is already enabled in sc16is7xx_probe() since commit 43c51bb573aa ("sc16is7xx: make sure device is in suspend once probed"). Now LCR is $00, which means that MCR access is enabled. Also remove regcache_cache_bypass() calls since we no longer access the enhanced registers set, and TCR is already declared as volatile (in fact by declaring MSR as volatile, which shares the same address). Finally disable access to TCR/TLR registers after modifying them by clearing MCR[2]. Note: the comment about "... and internal clock div" is wrong and can be ignored/removed as access to internal clock div registers (DLL/DLH) is permitted only when LCR[7] is logic 1, not when enhanced features is enabled. And DLL/DLH access is not needed in sc16is7xx_startup(). Fixes: dfeae619d781 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20250731124451.1108864-1-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19tty: hvc_console: Call hvc_kick in hvc_write unconditionallyFabian Vogt1-3/+3
commit cfd956dcb101aa3d25bac321fae923323a47c607 upstream. After hvc_write completes, call hvc_kick also in the case the output buffer has been drained, to ensure tty_wakeup gets called. This fixes that functions which wait for a drained buffer got stuck occasionally. Cc: stable <stable@kernel.org> Closes: https://bugzilla.opensuse.org/show_bug.cgi?id=1230062 Signed-off-by: Fabian Vogt <fvogt@suse.de> Link: https://lore.kernel.org/r/2011735.PYKUYFuaPT@fvogt-thinkpad Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19Revert "net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO ↵Paolo Abeni1-0/+13
runtime PM wakeups" commit 63a796558bc22ec699e4193d5c75534757ddf2e6 upstream. This reverts commit 5537a4679403 ("net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups"), it breaks operation of asix ethernet usb dongle after system suspend-resume cycle. Link: https://lore.kernel.org/all/b5ea8296-f981-445d-a09a-2f389d7f6fdd@samsung.com/ Fixes: 5537a4679403 ("net: usb: asix: ax88772: drop phylink use in PM to avoid MDIO runtime PM wakeups") Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://patch.msgid.link/2945b9dbadb8ee1fee058b19554a5cb14f1763c1.1757601118.git.pabeni@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19Input: i8042 - add TUXEDO InfinityBook Pro Gen10 AMD to i8042 quirk tableChristoffer Sandberg1-0/+14
commit 1939a9fcb80353dd8b111aa1e79c691afbde08b4 upstream. Occasionally wakes up from suspend with missing input on the internal keyboard. Setting the quirks appears to fix the issue for this device as well. Signed-off-by: Christoffer Sandberg <cs@tuxedo.de> Signed-off-by: Werner Sembach <wse@tuxedocomputers.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20250826142646.13516-1-wse@tuxedocomputers.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19Input: iqs7222 - avoid enabling unused interruptsJeff LaBundy1-0/+3
commit c9ddc41cdd522f2db5d492eda3df8994d928be34 upstream. If a proximity event node is defined so as to specify the wake-up properties of the touch surface, the proximity event interrupt is enabled unconditionally. This may result in unwanted interrupts. Solve this problem by enabling the interrupt only if the event is mapped to a key or switch code. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/aKJxxgEWpNaNcUaW@nixie71 Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mm/memory-failure: fix VM_BUG_ON_PAGE(PagePoisoned(page)) when unpoison memoryMiaohe Lin1-4/+3
commit d613f53c83ec47089c4e25859d5e8e0359f6f8da upstream. When I did memory failure tests, below panic occurs: page dumped because: VM_BUG_ON_PAGE(PagePoisoned(page)) kernel BUG at include/linux/page-flags.h:616! Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 3 PID: 720 Comm: bash Not tainted 6.10.0-rc1-00195-g148743902568 #40 RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Call Trace: <TASK> unpoison_memory+0x2f3/0x590 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110 debugfs_attr_write+0x42/0x60 full_proxy_write+0x5b/0x80 vfs_write+0xd5/0x540 ksys_write+0x64/0xe0 do_syscall_64+0xb9/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f08f0314887 RSP: 002b:00007ffece710078 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000009 RCX: 00007f08f0314887 RDX: 0000000000000009 RSI: 0000564787a30410 RDI: 0000000000000001 RBP: 0000564787a30410 R08: 000000000000fefe R09: 000000007fffffff R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000009 R13: 00007f08f041b780 R14: 00007f08f0417600 R15: 00007f08f0416a00 </TASK> Modules linked in: hwpoison_inject ---[ end trace 0000000000000000 ]--- RIP: 0010:unpoison_memory+0x2f3/0x590 RSP: 0018:ffffa57fc8787d60 EFLAGS: 00000246 RAX: 0000000000000037 RBX: 0000000000000009 RCX: ffff9be25fcdc9c8 RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff9be25fcdc9c0 RBP: 0000000000300000 R08: ffffffffb4956f88 R09: 0000000000009ffb R10: 0000000000000284 R11: ffffffffb4926fa0 R12: ffffe6b00c000000 R13: ffff9bdb453dfd00 R14: 0000000000000000 R15: fffffffffffffffe FS: 00007f08f04e4740(0000) GS:ffff9be25fcc0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564787a30410 CR3: 000000010d4e2000 CR4: 00000000000006f0 Kernel panic - not syncing: Fatal exception Kernel Offset: 0x31c00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) ---[ end Kernel panic - not syncing: Fatal exception ]--- The root cause is that unpoison_memory() tries to check the PG_HWPoison flags of an uninitialized page. So VM_BUG_ON_PAGE(PagePoisoned(page)) is triggered. This can be reproduced by below steps: 1.Offline memory block: echo offline > /sys/devices/system/memory/memory12/state 2.Get offlined memory pfn: page-types -b n -rlN 3.Write pfn to unpoison-pfn echo <pfn> > /sys/kernel/debug/hwpoison/unpoison-pfn This scenario can be identified by pfn_to_online_page() returning NULL. And ZONE_DEVICE pages are never expected, so we can simply fail if pfn_to_online_page() == NULL to fix the bug. Link: https://lkml.kernel.org/r/20250828024618.1744895-1-linmiaohe@huawei.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Naoya Horiguchi <nao.horiguchi@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> [ Adjust context ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19kernfs: Fix UAF in polling when open file is releasedChen Ridong1-18/+36
commit 3c9ba2777d6c86025e1ba4186dc5cd930e40ec5f upstream. A use-after-free (UAF) vulnerability was identified in the PSI (Pressure Stall Information) monitoring mechanism: BUG: KASAN: slab-use-after-free in psi_trigger_poll+0x3c/0x140 Read of size 8 at addr ffff3de3d50bd308 by task systemd/1 psi_trigger_poll+0x3c/0x140 cgroup_pressure_poll+0x70/0xa0 cgroup_file_poll+0x8c/0x100 kernfs_fop_poll+0x11c/0x1c0 ep_item_poll.isra.0+0x188/0x2c0 Allocated by task 1: cgroup_file_open+0x88/0x388 kernfs_fop_open+0x73c/0xaf0 do_dentry_open+0x5fc/0x1200 vfs_open+0xa0/0x3f0 do_open+0x7e8/0xd08 path_openat+0x2fc/0x6b0 do_filp_open+0x174/0x368 Freed by task 8462: cgroup_file_release+0x130/0x1f8 kernfs_drain_open_files+0x17c/0x440 kernfs_drain+0x2dc/0x360 kernfs_show+0x1b8/0x288 cgroup_file_show+0x150/0x268 cgroup_pressure_write+0x1dc/0x340 cgroup_file_write+0x274/0x548 Reproduction Steps: 1. Open test/cpu.pressure and establish epoll monitoring 2. Disable monitoring: echo 0 > test/cgroup.pressure 3. Re-enable monitoring: echo 1 > test/cgroup.pressure The race condition occurs because: 1. When cgroup.pressure is disabled (echo 0 > cgroup.pressure), it: - Releases PSI triggers via cgroup_file_release() - Frees of->priv through kernfs_drain_open_files() 2. While epoll still holds reference to the file and continues polling 3. Re-enabling (echo 1 > cgroup.pressure) accesses freed of->priv epolling disable/enable cgroup.pressure fd=open(cpu.pressure) while(1) ... epoll_wait kernfs_fop_poll kernfs_get_active = true echo 0 > cgroup.pressure ... cgroup_file_show kernfs_show // inactive kn kernfs_drain_open_files cft->release(of); kfree(ctx); ... kernfs_get_active = false echo 1 > cgroup.pressure kernfs_show kernfs_activate_one(kn); kernfs_fop_poll kernfs_get_active = true cgroup_file_poll psi_trigger_poll // UAF ... end: close(fd) To address this issue, introduce kernfs_get_active_of() for kernfs open files to obtain active references. This function will fail if the open file has been released. Replace kernfs_get_active() with kernfs_get_active_of() to prevent further operations on released file descriptors. Fixes: 34f26a15611a ("sched/psi: Per-cgroup PSI accounting disable/re-enable interface") Cc: stable <stable@kernel.org> Reported-by: Zhang Zhaotian <zhangzhaotian@huawei.com> Signed-off-by: Chen Ridong <chenridong@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20250822070715.1565236-2-chenridong@huaweicloud.com [ Drop llseek bits ] Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mm/khugepaged: fix the address passed to notifier on testing youngWei Yang1-2/+2
[ Upstream commit 394bfac1c7f7b701c2c93834c5761b9c9ceeebcf ] Commit 8ee53820edfd ("thp: mmu_notifier_test_young") introduced mmu_notifier_test_young(), but we are passing the wrong address. In xxx_scan_pmd(), the actual iteration address is "_address" not "address". We seem to misuse the variable on the very beginning. Change it to the right one. [akpm@linux-foundation.org fix whitespace, per everyone] Link: https://lkml.kernel.org/r/20250822063318.11644-1-richard.weiyang@gmail.com Fixes: 8ee53820edfd ("thp: mmu_notifier_test_young") Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Dev Jain <dev.jain@arm.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Nico Pache <npache@redhat.com> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: Barry Song <baohua@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mm/khugepaged: convert hpage_collapse_scan_pmd() to use foliosVishal Moola (Oracle)1-10/+10
[ Upstream commit 5c07ebb372d66423e508ecfb8e00324f8797f072 ] Replaces 5 calls to compound_head(), and removes 1385 bytes of kernel text. Link: https://lkml.kernel.org/r/20231020183331.10770-3-vishal.moola@gmail.com Signed-off-by: Vishal Moola (Oracle) <vishal.moola@gmail.com> Reviewed-by: Rik van Riel <riel@surriel.com> Reviewed-by: Yang Shi <shy828301@gmail.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Stable-dep-of: 394bfac1c7f7 ("mm/khugepaged: fix the address passed to notifier on testing young") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mtd: nand: raw: atmel: Respect tAR, tCLR in read setup timingAlexander Sverdlin1-3/+13
[ Upstream commit fd779eac2d659668be4d3dbdac0710afd5d6db12 ] Having setup time 0 violates tAR, tCLR of some chips, for instance TOSHIBA TC58NVG2S3ETAI0 cannot be detected successfully (first ID byte being read duplicated, i.e. 98 98 dc 90 15 76 14 03 instead of 98 dc 90 15 76 ...). Atmel Application Notes postulated 1 cycle NRD_SETUP without explanation [1], but it looks more appropriate to just calculate setup time properly. [1] Link: https://ww1.microchip.com/downloads/aemDocuments/documents/MPU32/ApplicationNotes/ApplicationNotes/doc6255.pdf Cc: stable@vger.kernel.org Fixes: f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Tested-by: Alexander Dahl <ada@thorsis.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mtd: nand: raw: atmel: Fix comment in timings preparationAlexander Dahl1-1/+1
[ Upstream commit 1c60e027ffdebd36f4da766d9c9abbd1ea4dd8f9 ] Looks like a copy'n'paste mistake introduced when initially adding the dynamic timings feature with commit f9ce2eddf176 ("mtd: nand: atmel: Add ->setup_data_interface() hooks"). The context around this and especially the code itself suggests 'read' is meant instead of write. Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20240226122537.75097-1-ada@thorsis.com Stable-dep-of: fd779eac2d65 ("mtd: nand: raw: atmel: Respect tAR, tCLR in read setup timing") Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mm/damon/lru_sort: avoid divide-by-zero in damon_lru_sort_apply_parameters()Quanmin Yan1-0/+3
commit 711f19dfd783ffb37ca4324388b9c4cb87e71363 upstream. Patch series "mm/damon: avoid divide-by-zero in DAMON module's parameters application". DAMON's RECLAIM and LRU_SORT modules perform no validation on user-configured parameters during application, which may lead to division-by-zero errors. Avoid the divide-by-zero by adding validation checks when DAMON modules attempt to apply the parameters. This patch (of 2): During the calculation of 'hot_thres' and 'cold_thres', either 'sample_interval' or 'aggr_interval' is used as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Additionally, since 'aggr_interval' is already required to be set no smaller than 'sample_interval' in damon_set_attrs(), only the case where 'sample_interval' is zero needs to be checked. Link: https://lkml.kernel.org/r/20250827115858.1186261-2-yanquanmin1@huawei.com Fixes: 40e983cca927 ("mm/damon: introduce DAMON-based LRU-lists Sorting") Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: ze zuo <zuoze1@huawei.com> Cc: <stable@vger.kernel.org> [6.0+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mm/damon/reclaim: avoid divide-by-zero in damon_reclaim_apply_parameters()Quanmin Yan1-0/+3
commit e6b543ca9806d7bced863f43020e016ee996c057 upstream. When creating a new scheme of DAMON_RECLAIM, the calculation of 'min_age_region' uses 'aggr_interval' as the divisor, which may lead to division-by-zero errors. Fix it by directly returning -EINVAL when such a case occurs. Link: https://lkml.kernel.org/r/20250827115858.1186261-3-yanquanmin1@huawei.com Fixes: f5a79d7c0c87 ("mm/damon: introduce struct damos_access_pattern") Signed-off-by: Quanmin Yan <yanquanmin1@huawei.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: ze zuo <zuoze1@huawei.com> Cc: <stable@vger.kernel.org> [6.1+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19mm/damon/sysfs: fix use-after-free in state_show()Stanislav Fort1-5/+9
commit 3260a3f0828e06f5f13fac69fb1999a6d60d9cff upstream. state_show() reads kdamond->damon_ctx without holding damon_sysfs_lock. This allows a use-after-free race: CPU 0 CPU 1 ----- ----- state_show() damon_sysfs_turn_damon_on() ctx = kdamond->damon_ctx; mutex_lock(&damon_sysfs_lock); damon_destroy_ctx(kdamond->damon_ctx); kdamond->damon_ctx = NULL; mutex_unlock(&damon_sysfs_lock); damon_is_running(ctx); /* ctx is freed */ mutex_lock(&ctx->kdamond_lock); /* UAF */ (The race can also occur with damon_sysfs_kdamonds_rm_dirs() and damon_sysfs_kdamond_release(), which free or replace the context under damon_sysfs_lock.) Fix by taking damon_sysfs_lock before dereferencing the context, mirroring the locking used in pid_show(). The bug has existed since state_show() first accessed kdamond->damon_ctx. Link: https://lkml.kernel.org/r/20250905101046.2288-1-disclosure@aisle.com Fixes: a61ea561c871 ("mm/damon/sysfs: link DAMON for virtual address spaces monitoring") Signed-off-by: Stanislav Fort <disclosure@aisle.com> Reported-by: Stanislav Fort <disclosure@aisle.com> Reviewed-by: SeongJae Park <sj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: SeongJae Park <sj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19libceph: fix invalid accesses to ceph_connection_v1_infoIlya Dryomov1-3/+4
commit cdbc9836c7afadad68f374791738f118263c5371 upstream. There is a place where generic code in messenger.c is reading and another place where it is writing to con->v1 union member without checking that the union member is active (i.e. msgr1 is in use). On 64-bit systems, con->v1.auth_retry overlaps with con->v2.out_iter, so such a read is almost guaranteed to return a bogus value instead of 0 when msgr2 is in use. This ends up being fairly benign because the side effect is just the invalidation of the authorizer and successive fetching of new tickets. con->v1.connect_seq overlaps with con->v2.conn_bufs and the fact that it's being written to can cause more serious consequences, but luckily it's not something that happens often. Cc: stable@vger.kernel.org Fixes: cd1a677cad99 ("libceph, ceph: implement msgr2.1 protocol (crc and secure modes)") Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19fuse: prevent overflow in copy_file_range return valueMiklos Szeredi1-1/+1
commit 1e08938c3694f707bb165535df352ac97a8c75c9 upstream. The FUSE protocol uses struct fuse_write_out to convey the return value of copy_file_range, which is restricted to uint32_t. But the COPY_FILE_RANGE interface supports a 64-bit size copies. Currently the number of bytes copied is silently truncated to 32-bit, which may result in poor performance or even failure to copy in case of truncation to zero. Reported-by: Florian Weimer <fweimer@redhat.com> Closes: https://lore.kernel.org/all/lhuh5ynl8z5.fsf@oldenburg.str.redhat.com/ Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()") Cc: <stable@vger.kernel.org> # v4.20 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2025-09-19fuse: check if copy_file_range() returns larger than requested sizeMiklos Szeredi1-0/+3
commit e5203209b3935041dac541bc5b37efb44220cc0b upstream. Just like write(), copy_file_range() should check if the return value is less or equal to the requested number of bytes. Reported-by: Chunsheng Luo <luochunsheng@ustc.edu> Closes: https://lore.kernel.org/all/20250807062425.694-1-luochunsheng@ustc.edu/ Fixes: 88bc7d5097a1 ("fuse: add support for copy_file_range()") Cc: <stable@vger.kernel.org> # v4.20 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-06 07:30:17 +0300