summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-02-29ALSA: hda/conexant - Clear unsol events on unused pinsTakashi Iwai1-0/+45
It seems that Lenovo machines (or codec chip itself?) leave the unsol event tags and the enablement-flag from other pins bogusly even on the unused pins. Although this shouldn't be too critical, it's better to clear them up sanely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-29ALSA: hda - Enable docking-station SPDIF for ThinkpadTakashi Iwai1-0/+1
The docking-station of Thinkpad X200 & co supports also an SPDIF output, and the corresponding pin 0x1c has to be enabled for using it. Reported-and-tested-by: Sebastian Glita <sebastian.glita@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-28ALSA: hda - Add position_fix=4 (COMBO) optionTakashi Iwai3-3/+22
This patch adds a new position_fix option value, 4, as a combo mode to use LPIB for playbacks and POSBUF for captures. It's the way recommended by Intel hardware guys. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-28ALSA: hda - Fix audio playback support on HP Zephyr systemVitaliy Kulikov1-0/+36
Enables port E of IDT 92HD91 codec as output and sets correct output phase between ports E and D and high pass filter. Signed-off-by: Vitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-23ALSA: hda - add id for Atom Cedar Trail HDMI codecWu Fengguang1-0/+2
[the order sorted by tiwai] Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: hda/via - Add a few sanity checksTakashi Iwai1-1/+10
Added sanity checks in a few places not to assume the pins having the certain amp caps or the input-source being always assigned to a mux. No actual bugs have been triggered by these, but surely better to be a bit more robust. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-22ALSA: hda/via - Don't create duplicated boost controlsTakashi Iwai1-1/+8
The driver may create duplicated mic boost controls when there are multiple mics with the very same type / location, and this leads to the error at actual kcontrol creation. It needs to check the validity of the created control and add a proper index if it's duplicated. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Small code cleanupsTakashi Iwai1-135/+5
A few clean-ups for post-static-quirk time: - Call alc_auto_init_std() statically in alc_init() instead of setting spec->init_hook in each caller. spec->init_hook field is left unused for any future use. - Move the call of set_capture_mixer() to to alc_parse_auto_config() instead of each caller. - Get rid of the ADC-filling and imux check in each parser function. This is no longer needed since the auto-parser always check ADCs and imux. It was only for the static quirks. - Kill unused defines Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Fix the wrong offset for two-speaker systemsTakashi Iwai1-1/+5
When the machine has two speakers but wants to put more multi-io jacks, the parser shouldn't consider about the shared DAC but try to assign the individual DACs. Otherwise the channel mapping would be fairly confused and lead to the wrong DACs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Fix the possible conflicts of Bass Speaker nameTakashi Iwai1-3/+6
When the multi-io is added to the two speaker output configuration, the parser would try to add yet another "Bass Speaker" control since it checks only cfg->line_outs. Add a workaround for it by simply passing the channel name in the case of multi-io outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Create individual mute switches for shared DACTakashi Iwai1-30/+20
Even if the outputs are using shared DACs, we can still create individual mute siwtches since they are assigned per pin. This allows to create, e.g. Speaker and Bass Speaker mute switches while the single volume is used for these outputs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Fix possible Oops with NULL input_muxTakashi Iwai1-0/+3
When BIOS is damn crazy and gives no pin-config at all, the driver might lead to a NULL dereference. Let's add a NULL check for such a case. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Parse aa-loopback items dynamicallyTakashi Iwai1-82/+22
Similarly in patch_via.c, parse the active analog-loopback connections and create a list dynamically rather than static arrays. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-21ALSA: hda/realtek - Remove the last static quirks for ALC882Takashi Iwai4-1141/+93
Resitance is futile. The remaining static model quirks for Apple machines with ALC882-compatible codecs are converted to the auto-parser now. We can remove all alc*_quirks.c finally. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Add model=fixup not to apply fix-upsTakashi Iwai1-0/+7
If anyone wants to debug the driver and avoid the existing fix-ups, pass model=nofixup option. Then the driver will skip to pick up the fixup list. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Drop all ALC880 static quirksTakashi Iwai4-860/+195
Finally the all static quirks for ALC880 are converted to the auto-parser. Since we are never sure whether the BIOS on so many old machines are really correct, the quirk table entries are copied as they are, but just providing the proper pin-config values accordingly. Since alc880_quirks.c is removed, alc882_quirks.c has to be adjusted slightly to be built again. There might be some compile warnings due to the remaining alc882 quirks, but these shall be killed sooner or later, I don't care it much at this point. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Drop model=asus* from ALC880Takashi Iwai3-130/+3
It turned out that BIOS on most of ASUS mobo's set the pin-config tables reasonably well for the auto-parser. We'd need GPIO setups, but should work as is other than that. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Rewrite ALC880 model=asus-w1v with auto-parserTakashi Iwai3-32/+6
ASUS W1V has a sane pin-config table set by BIOS. The only missing piece is the setup of GPIO1. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Rewrite ALC880 model=z71v with auto-parserTakashi Iwai3-59/+20
ASUS Z71V has a totally broken BIOS setup (at least the info I got), thus we need to override the whole pin-config table to make the auto-parser working correctly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Rewrite ALC880 model=uniwill-dig with auto-parserTakashi Iwai2-14/+13
ALC880 model=uniwill-dig requires the fix-up of bogus BIOS pin default configurations. Other than that, it's pretty normal. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Rewrite ALC880 model=uniwill with auto-parserTakashi Iwai4-131/+12
The model=uniwill would work almost as is, but a couple of adjustments are needed to make the mutli-io working correctly. The headphone and speaker pins have to be marked properly in pin configs. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Rewrite ALC880 model=uniwill-p53 with auto-parserTakashi Iwai2-94/+1
Uniwill p53 has a sane BIOS setup but just needs the volume-knob handling like Fujitsu laptops with ALC880. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Rewrite ALC880 model=F1734 with auto-parserTakashi Iwai3-86/+24
Similar as the previous patch for model=fujitsu, we can now move the static quirk for F1734 to the auto-parser. The only difference is the default pin configurations: F1734 has less pins than Amilo's. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Rewrite ALC880 model=futjisu with auto-parserTakashi Iwai3-36/+74
Now adding the support for the volume-knob widget, we can move the static quirk for ALC880 model=fujitsu to the auto-parser completely. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-20ALSA: hda/realtek - Apply probe-fixup really after probingTakashi Iwai1-16/+16
Move the call of alc_apply_fixup() with ALC_FIXUP_ACT_PROBE after the whole setups of patch_ops & co, so that the fix-up function may override the default setup. This will be needed for installing the own unsol event handler (e.g. for volume-knob controls). Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17ALSA: hda/realtek - Replace ALC880 model=tcl with auto-parserTakashi Iwai3-59/+13
It needs a few extra setups for EAPD, but others look fairly straightforward. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17ALSA: hda/realtek - Drop ALC880 model=clevoTakashi Iwai3-46/+11
Clevo machines with ALC880 are all well with proper BIOS setup. It seems still requiring the additional COEF setup for the EAPD. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17ALSA: hda/realtek - Refactor the DAC filler functionTakashi Iwai1-77/+77
Refactor the DAC filling function to be used for both the primary line outputs and extra outputs using the individual badness tables. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17ALSA: hda/realtek - Rewrite ALC880 model=w810 with auto-parserTakashi Iwai3-84/+14
The Medion W810 with ALC880 has a typical BIOS bug, copying the pin-defaults without disabling the unused pins. At least, the pin 0x17 must be disabled. Also, it requires GPIO-2 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17ALSA: hda/realtek - Rewrite ALC880 model=lg with the auto-parserTakashi Iwai3-159/+14
ALC880 model=lg could work fine with the auto-parser due to the recent rewrite, but it still needs the manual adjustment; namely, the BIOS leaves unused pins as some real active jacks. This confuses the parser. Thus we just cover these pins and override the pin-configs as a fix-up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17ALSA: hda/realtek - Adjust badness calculation for multi-iosTakashi Iwai1-62/+134
Try harder to fit the multi-io pins also by checking the hard-wired connections for multi-ios. Also, the badness values are adjusted to prioritize the multi-ios as more valuable. These changes will enable the multi-io on some machines without losing the current capability. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-17ALSA: hda/realtek - Show multi-io pins in debug printsTakashi Iwai1-0/+5
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Try harder to fit the single-connectionsTakashi Iwai1-33/+91
So far, the Realtek driver tires to assign the single-connected routes for all pins only once at the beginning. However, since some DACs have been already mapped, the rest pins might have also single conections. In this patch, the driver does the single-connection assignment in a loop until all possbile single-connections are checked. This will improve the DAC assignment, e.g. for ASUS G72. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Finer tuning of auto-parser with badness evaluationTakashi Iwai1-84/+293
This patch improves the Realtek auto-parser for assigning the DACs and mixers in more suitable ways by evaluating the assignment with "badness" calculations. When assigning a DAC hinders the assignment of individual DACs for other pins, some badness point is given. Similarly, when it blocks the assignment of unique mixer controls, another badness point is added. Also, if no DAC, even shared DAC, can be assigned, more badness is pointed. Finally, comparing the accumulated badness, the best route is chosen among several trials. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Improve the signel-connection checkTakashi Iwai1-1/+5
When the connections from the pin selector contain only two widgets, a route to DAC and the aa-mixer, it's certainly a single connection. In such a case, get_dac_if_single() should return the connected DAC, too. This will improve the detection of the individual DAC assignment for each pin. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16Merge branch 'fix/hda' into topic/hdaTakashi Iwai7-12/+48
The fix for bitmap-overflow in Realtek codec driver is needed for the further development of the auto-parser with badness evaluation.
2012-02-16ALSA: hda/realtek - Fix overflow of vol/sw check bitmapTakashi Iwai1-3/+8
The bitmap introduced in the commit [527e4d73: ALSA: hda/realtek - Fix missing volume controls with ALC260] is too narrow for some codecs, which may have more NIDs than 0x20, thus it may overflow the bitmap array on them. Just double the number to cover all and also add a sanity-check code to be safer. Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Disable static fixups for ASUS with ALC269Takashi Iwai1-1/+1
We've enabled the static fixups for ASUS machines with ALC269 codec, just for making things compatible during the transition to the auto- parser. However, it seems that the static configurations do more harmful than good, as some of entries don't match with the actual hardware setups. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Remove leftover static quirks for ALC260Takashi Iwai4-778/+9
Now we can clean up all static quirks for ALC260. Also many codes in alc_quirks.c can be ripped off since they have been used only by ALC260 static quirks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Drop model=fujitsu from ALC260 static quirksTakashi Iwai2-143/+0
The model works with the auto-parser as is, thus now good to drop. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Drop model=favorit100 for ALC260Takashi Iwai3-130/+1
It's working with the auto-parser just with the standard GPIO 1 setup. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Add the support for HP Presario B1900Takashi Iwai1-0/+8
HP Presario B1900 needs a similar hack like Replacer, toggling GPIO1 per the jack state, in addition to the COEF setup used for other Acer laptops. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Replace ALC260 model=replacer with the auto-parserTakashi Iwai3-77/+44
The support for Replacer 627V in the auto-parser needs the unique unsol event handling: although the machine has a single output pin 0x0f, it's used for both the headphone and the speaker, and the driver needs to toggle the output route via GPIO 1. In addition, it needs a special COEF setup with 0x3050. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Replace ALC260 model=acer with the auto-parserTakashi Iwai3-147/+7
The ALC260 model=acer needs GPIO1 setup. It could be selected well if the codec SSID is set properly by BIOS, but to make sure, enable it forcibly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-16ALSA: hda/realtek - Add the fixup codes for ALC260 model=willTakashi Iwai3-47/+24
The model=will for ALC260 requires the pin 0x0f to be a headphone and some special verbs for the COEF to turn on the amp. Now added these as fixup entries and removed the static model quirk. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-15ALSA: usb-audio: avoid integer overflow in create_fixed_stream_quirk()Xi Wang3-4/+7
A malicious USB device could feed in a large nr_rates value. This would cause the subsequent call to kmemdup() to allocate a smaller buffer than expected, leading to out-of-bounds access. This patch validates the nr_rates value and reuses the limit introduced in commit 4fa0e81b ("ALSA: usb-audio: fix possible hang and overflow in parse_uac2_sample_rate_range()"). Signed-off-by: Xi Wang <xi.wang@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-14ALSA: intel8x0: Fix default inaudible sound on Gateway M520Daniel T Chen1-0/+6
BugLink: https://bugs.launchpad.net/bugs/930842 The reporter states that audio is inaudible by default without muting 'External Amplifier'. Add a quirk to handle his SSID so that changing the control is not necessary. Reported-and-tested-by: Benjamin Carlson <elderbubba0810@gmail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-02-14Merge tag 'asoc-3.3' of ↵Takashi Iwai1-5/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus A simple fix from Morimoto-san for the pointer() operation in the FSI driver.
2012-02-13Merge branch 'fix/acer-alc889-fix' into fix/hdaTakashi Iwai1-0/+23
Conflicts: sound/pci/hda/patch_realtek.c Merged back the fix for Acer Aspire 6935 with ALC889 codec. The fix commit was based on 3.2 kernel so that it can be applied to stable kernel cleanly.
2012-02-13ALSA: hda - Fix silent speaker output on Acer Aspire 6935Takashi Iwai1-0/+23
Since 3.2 kernel, the driver starts trying to assign the multi-io DACs before the speaker, thus it assigns DAC2/3 for multi-io and DAC4 for the speaker for a standard laptop setup like a HP, a speaker, a mic-in and a line-in. However, on Acer Aspire 6935, it seems that the speaker pin 0x14 must be connected with either DAC1 or 2; otherwise it results in silence by some reason, although the codec itself allows the routing to DAC3/4. As a workaround, the connection list of each pin is reduced to be mapped to either only DAC1/2 or DAC3/4, so that the compatible assignment as in kernel 3.1 is achieved. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42740 Cc: <stable@kernel.org> [v3.2+] Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-10 17:57:33 +0300