summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-08-13rtlwifi: misspelled code and comments corrected.Cheolhyun Park2-2/+2
Signed-off-by: Cheolhyun Park <pch851130@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10ath: Make ath_opmode_to_string understand OCB modeBertold Van den Bergh1-0/+2
Make ath_opmode_to_string return "OCB" for NL80211_IFTYPE_OCB. Currently it will return "UNKNOWN". Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10bcma: fix access to host_pdev for PCIe devicesHauke Mehrtens2-3/+28
bus->host_pdev is part of a union so bus->host_pdev != NULL is probably also true for PCIe devices, because there it accesses bus->host_pci. If we access the dev member at the offset defined in struct platform_device in struct pci_dev instead we probably get something else. This patch adds a new function which returns the host dev struct and NULL if we do not have a host dev. When this gets registered on MIPS brcm47xx we do not have a host dev in some situations. This function could also be used in other places. This problem was introduced in this commit: commit cae761b5a6bdc597ba476a040fdcd5b4bc559b85 Author: Rafa? Mi?ecki <zajec5@gmail.com> Date: Sun Jun 28 17:17:13 2015 +0200 bcma: populate bus DT subnodes as platform_device-s Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10mt7601u: lock out rx path and tx status reportingJakub Kicinski5-3/+11
mac80211 requires that rx path does not run concurrently with tx status reporting. Add a spinlock which will ensure that. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10mt7601u: fix tx status reporting contextsJakub Kicinski4-4/+33
mac80211 requires that rx path does not run concurrently with tx status reporting. Since rx path is run in driver tasklet, tx status cannot be reported directly from interrupt context (there would be no way to lock it out). Add tasklet for tx and move all possible code from irq handler there. Note: tx tasklet is needed because workqueue is queued very rarely and that kills TCP performance. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10mt7601u: use correct ieee80211_rx variantJakub Kicinski1-1/+1
Rx is run inside a tasklet so ieee80211_rx() should be used instead of ieee80211_rx_ni(). Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10mt7601u: fix dma from stack addressJakub Kicinski3-35/+34
DMA to variables located on the stack is a bad idea. For simplicity and to avoid frequent allocations create a buffer inside the device structure. Protect this buffer with vendor_req_mutex. Don't protect vendor requests which don't use this buffer. Signed-off-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10wlcore: add p2p device supportEliad Peller8-27/+136
When starting a p2p mgmt interface, enable its device role. This allows us to keep the sta role disabled and scan on the dev role. In general, p2p management interfaces cannot send vif-specific commands to FW, as the vif role id is invalid. Only off-channel data and scans happen on this vif, so most ops are not relevant. If the vif is a p2p mgmt vif, block some mac80211 ops. Configure rate policies for p2p mgmt interface, as otherwise p2p packets come out with arbitrary rates. Since wpa_supplicant currently doesn't support standalone p2p device mode (without another attached managed interface), add p2p device to the allowed interface combinations without decreasing the allowed station count. Moreover, increase the station count in some cases, as AP mode usually starts as station interface, and the AP interface is now different from the p2p management one). Signed-off-by: Arik Nemtsov <arik@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10wlcore: add generic_cfg_feature command definitionsEliad Peller2-0/+45
Add definitions and function prototypes for generic_cfg command. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10wl18xx: use long intervals in sched scanEliad Peller5-6/+34
Add support for long intervals on sched scan. If configured, the original request interval will be used num_short_interval times, and then the long interval will be used. While on it, fix the scan command field names to reflect the expected value is in ms (rather than secs). These values will be taken from the conf file, so bump its version accordingly. Signed-off-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10wlcore/wl18xx : add time sync event handlingMachani, Yaniv3-6/+23
Added support for a new time sync event the event data contains the WiLink TSF value. To trigger the event, a HW modification is required, so as a supporting firmware binary. Signed-off-by: Yaniv Machani <yanivma@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-10mwifiex: correct TDLS link delete failure message priorityAmitkumar Karwar1-1/+1
Commit d8d2f19feb16 ("mwifiex: silence TDLS link delete failure for nonexistent link") lowers the priority of error message when TDLS link is already deleted. But it had got increased by commit acebe8c10a6e ("mwifiex: change dbg print func to mwifiex_dbg") Reported-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-07ath9k: fix build with CONFIG_ATH9K_STATION_STATISTICS=yFelix Fietkau1-17/+3
kbuild bot reported that commit 592fa228f213 ("ath9k: remove struct ath_atx_ac") broke the build when CONFIG_ATH9K_STATION_STATISTICS is y. Reported-by: kbuild test robot <fengguang.wu@intel.com> Fixes: 592fa228f213 ("ath9k: remove struct ath_atx_ac") Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06Merge tag 'iwlwifi-next-for-kalle-2015-08-04' of ↵Kalle Valo58-921/+2572
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * Deprecate -10.ucode * Clean ups towards multiple Rx queues * Add support for longer CMD IDs. This will be required by new firmwares since we are getting close to the u8 limit. * bugfixes for the D0i3 power state * Add basic support for FTM * More random that doesn't really stand out
2015-08-06wlcore: add antenna diversity reading commentsGuy Mishol1-0/+6
add comments to the antenna diversity reading Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: add missing skb_push() in mwifiex_check_uap_capabiltiesAmitkumar Karwar1-0/+2
For PCIe/USB chipsets, preallocated skb buffers are reused for event handling. mwifiex_check_uap_capabilties() performs skb_pull(). This patch adds missing skb_push() to restore skb's data pointer/length. This bug was introduced by commit debfc6008169 ("mwifiex: update AP WMM settings from BSS_START event") Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06wl18xx: add dynamic fw tracesGuy Mishol5-1/+97
add option to dynamically configure the fw which debug traces to open Signed-off-by: Guy Mishol <guym@ti.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: corrections in PCIe event skb handlingAmitkumar Karwar1-0/+2
Preallocated event SKBs are getting reused for PCIe chipset. Their physical addresses are shared with firmware so that firmware can write data into them. This patch makes sure that SKB is cleared and length is set to default while submitting it to firmware. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: fix system crash observed during initialisationZhaoyang Liu1-1/+3
System crash was observed if one of the driver initialisation commands is timed out. The reason is our timeout handler triggers firmware dump, meanwhile driver initialisation error paths have already freed the adapter structure. Firmware hasn't yet completely initialized. So collecting firmware dump is not needed in this case. Command timeout handler is modified in this patch to fix the crash issue. Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: fix command timeout for PCIe chipsetsZhaoyang Liu2-5/+4
When WLAN interface is up and running, driver unload and load was causing command timeout error. We enable Rx data by updating RX ring read pointer in init_fw_port(). It should be done when FW is completely intialialised. Command timeout is fixed in this patch by moving init_fw_port() call to mwifiex_init_fw_complete(). Signed-off-by: Zhaoyang Liu <liuzy@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: using right aid value for tdls action frameXinming Hu1-1/+1
Variable pos is u8 here, so memcpy is needed to store u16 aid. At the same time, aid should be platform independent, upper layer utility(wpa_supplicant,etc.,) parse it as le16, so keep it le16 here. Signed-off-by: Xinming Hu <huxm@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06ath9k: remove the sched field in struct ath_atx_tidFelix Fietkau2-16/+8
Use list_empty(&tid->list) instead Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06ath9k: remove struct ath_atx_acFelix Fietkau2-99/+41
struct ath_atx_ac contains a list of active TIDs belonging to one WMM AC. This patch changes the code to track active station TIDs in the txq directly. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06ath9k: add fast-xmit supportFelix Fietkau1-0/+1
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06ath9k: setup rxfilter when offchannelJanusz.Dziedzic@tieto.com1-0/+3
Setup rxfiler correctly for offchannel ctx. This fix problem we didn't configure rxfilter, next didn't receive probe requests and next failed p2p_find. This was seen when ath9k loaded with use_chanctx=1 Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06ath9k: setup rxfilter for all chanctxJanusz.Dziedzic@tieto.com1-1/+3
While mac80211 setup this per HW, set same rxfilter configuration for all chanctx. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06ath9k: handle RoC cancel correctlyJanusz.Dziedzic@tieto.com3-10/+26
In case we will get ROC cancel from mac80211 we should not call ieee80211_remain_on_channel_expired(). In other case I hit such warning on MIPS and p2p negotiation failed (tested with use_chanctx=1). ath: phy0: Starting RoC period ath: phy0: Channel definition created: 2412 MHz ath: phy0: Assigned next_chan to 2412 MHz ath: phy0: Offchannel duration for chan 2412 MHz : 506632 ath: phy0: ath_chanctx_set_next: current: 2412 MHz, next: 2412 MHz ath: phy0: Stopping current chanctx: 2412 ath: phy0: Flush timeout: 200 ath: phy0: ath_chanctx_set_next: Set channel 2412 MHz ath: phy0: Set channel: 2412 MHz width: 0 ath: phy0: Reset to 2412 MHz, HT40: 0 fastcc: 0 ath: phy0: cur_chan: 2412 MHz, event: ATH_CHANCTX_EVENT_TSF_TIMER, state: ATH_CHANCTX_STATE_IDLE ath: phy0: ath_offchannel_channel_change: offchannel state: ATH_OFFCHANNEL_ROC_START ath: phy0: cur_chan: 2412 MHz, event: ATH_CHANCTX_EVENT_SWITCH, state: ATH_CHANCTX_STATE_IDLE ath: phy0: Cancel RoC ath: phy0: RoC aborted ath: phy0: RoC request on vif: 00:03:7f:4e:a0:cd, type: 1 duration: 500 ath: phy0: Starting RoC period ath: phy0: Channel definition created: 2412 MHz ath: phy0: Assigned next_chan to 2412 MHz ath: phy0: Offchannel duration for chan 2412 MHz : 506705 ath: phy0: ath_chanctx_set_next: current: 2412 MHz, next: 2412 MHz ath: phy0: ath_offchannel_channel_change: offchannel state: ATH_OFFCHANNEL_ROC_START ath: phy0: cur_chan: 2412 MHz, event: ATH_CHANCTX_EVENT_SWITCH, state: ATH_CHANCTX_STATE_IDLE ------------[ cut here ]------------ WARNING: CPU: 0 PID: 3312 at drivers/net/wireless/ath/ath9k/main.c:2319 Modules linked in: ath9k ath9k_common ath9k_hw ath mac80211 cfg80211 Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06ath9k: advertise p2p dev support when chanctxJanusz.Dziedzic@tieto.com1-1/+6
Advertise p2p device support when ath9k loaded with use_chanctx=1. This will fix problem, when first interface is an AP and next we would like to run p2p_find. Before p2p find (scan phase) failed with EOPNOTSUPP. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: simplify mwifiex_complete_cmdAndreas Fenkart3-11/+6
600f5d909a54("mwifiex: cleanup ioctl wait queue and abstraction layer") introduced the wakeup_interruptible suppression in mwifiex_complete_cmd b1a47aa5e1e1("mwifiex: fix system hang issue in cmd timeout error case") then added wakup_interruptible to mwifiex_cmd_timeout_func the single place setting a status of ETIMEDOUT. Instead of doing extra work, using the standard call-chain will have the same effect: mwifiex_cancel_pending_ioctl -> mwifiex_recycle_cmd_node -> mwifiex_insert_cmd_to_free_q -> mwifiex_complete_cmd -> wake_up_interruptible The difference is that previously the condition was not set to true, but that's probably just an oversight in b1a47aa5e1e1 and shouldn't have any consequence Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: remove CMD_F_CANCELED flagAndreas Fenkart2-14/+10
CMD_F_CANCELED was used to abort mwifiex_process_cmdresp in case it already started or starts processing the cmd. But this was probably not working the way intended: - it is racy: mwifiex_process_cmdresp might already have passed that test and is continuing to use the cmd node being recycled - mwifiex_process_cmdresp repeatedly uses adapter->curr_cmd which we just set to NULL - mwifiex_recycle_cmd_node will clear the flag The reason why it probably works is that mwifiex_cancel_pending_ioctl is only called from mwifiex_cmd_timeout_func, where the there is little chance of a command response still arriving Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: remove redundant reset of cmd_wait_q statusAndreas Fenkart1-1/+0
mwifiex_cancel_pending_ioctl is called only from mwifiex_cmd_timeout_func. There the wait_q status is set to -ETIMEDWAIT before calling this function. Whether we reset the status to -1 or leave it at -ETIMEDWAIT at end doesn't matter since both are != 0 hence mean failure Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: remove explicit mwifiex_complete_cmd callsAndreas Fenkart1-8/+2
standard call chain when releasing a cmd node: mwifiex_recycle_cmd_node -> mwifiex_insert_cmd_to_free_q -> mwifiex_complete_cmd, if wait_q_enabled calling mwifiex_complete_cmd explicitly and setting wait_q_enabled = false is redundant Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-06mwifiex: sdio: reset adapter using mmc_hw_resetAndreas Fenkart2-15/+39
Since 1fb654fd97ff("mmc: sdio: add reset callback to bus operations"), sdio cards can be power cycled using mmc_hw_reset. The use mmc_remove_host/mmc_add_host is discouraged, because these are internal functions to the mmc core and should only be used by mmc hosts Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Acked-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-08-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf-nextDavid S. Miller24-217/+461
Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next, they are: 1) A couple of cleanups for the netfilter core hook from Eric Biederman. 2) Net namespace hook registration, also from Eric. This adds a dependency with the rtnl_lock. This should be fine by now but we have to keep an eye on this because if we ever get the per-subsys nfnl_lock before rtnl we have may problems in the future. But we have room to remove this in the future by propagating the complexity to the clients, by registering hooks for the init netns functions. 3) Update nf_tables to use the new net namespace hook infrastructure, also from Eric. 4) Three patches to refine and to address problems from the new net namespace hook infrastructure. 5) Switch to alternate jumpstack in xtables iff the packet is reentering. This only applies to a very special case, the TEE target, but Eric Dumazet reports that this is slowing down things for everyone else. So let's only switch to the alternate jumpstack if the tee target is in used through a static key. This batch also comes with offline precalculation of the jumpstack based on the callchain depth. From Florian Westphal. 6) Minimal SCTP multihoming support for our conntrack helper, from Michal Kubecek. 7) Reduce nf_bridge_info per skbuff scratchpad area to 32 bytes, from Florian Westphal. 8) Fix several checkpatch errors in bridge netfilter, from Bernhard Thaler. 9) Get rid of useless debug message in ip6t_REJECT, from Subash Abhinov. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04iwlwifi: mvm: clean up fw-api-scan.hDavid Spinadel1-129/+0
Remove outdated and unused definitions Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: mvm: add wide firmware command support for debug triggersSara Sharon1-3/+4
Add support for extended command id in triggers handling. Extended command id header contains group id in addition to command id. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: mvm: add wide firmware command infrastructure for RXAvraham Stern1-2/+5
Add support for extended firmware event header that contains a group id as well as the command id. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: add wide firmware command support for notificationsSara Sharon12-17/+26
Add support for extended command id in notification system. Extended command id header contains group id in addition to command id. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: make various functions void in the file rs.cNicholas Krause1-30/+21
This makes various functions in the file rs.c void due to these functions never returning a error code to signal to their callers if and how they have failed to complete their intended work. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: mvm: move TX PN assignment for CCMP to the driverJohannes Berg4-23/+50
Move the TX PN assignment (for CCMP only) to the driver. This prepares the driver for future DSO (driver segmentation offload) where it will split an SKB into multiple MPDUs by itself. For TDLS, split out the CCMP TX command handling so that it won't get a PN assigned, the firmware assigns the PN in that case. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04netfilter: ip6t_REJECT: Remove debug messages from reject_tg6()Subash Abhinov Kasiviswanathan1-5/+0
Make it similar to reject_tg() in ipt_REJECT. Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2015-08-04Merge branch 'cxgb4-next'David S. Miller5-20/+506
Hariprasad Shenai says: ==================== add meminfo, bist status and misc. fixes This patch series adds the following. Add support to dump memory address range of various hw modules Add support to dump edc bist status during ecc error Read correct bits of who am i register for T6 adapter and update T6 register range This patch series has been created against net-next tree and includes patches on cxgb4 and cxgb4vf driver. We have included all the maintainers of respective drivers. Kindly review the change and let us know in case of any review comments. V2: PATCH 3/4 ("cxgb4/cxgb4vf: read the correct bits of PL Who Am I register") Fix switch statement in get_chip_type() and some more style fixes based on review comment by Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4: Update T6 register rangesHariprasad Shenai1-14/+12
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4/cxgb4vf: read the correct bits of PL Who Am I registerHariprasad Shenai4-4/+45
Read the correct bits of PL Who Am I for the Source PF field which has changed in T6 Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4: Add support to dump edc bist statusHariprasad Shenai2-2/+42
Add support to dump edc bist status for ECC data errors Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04cxgb4: Add debugfs support to dump meminfoHariprasad Shenai2-0/+407
Add debug support to dump memory address ranges of various hardware modules of the adapter. Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-04iwlwifi: pcie: reset write pointer on ict resetEliad Peller2-2/+4
Since the CSR_DRAM_INIT_TBL_WRITE_POINTER bit wasn't set on ict reset, in some flows (like disable ict followed by immediate reset ict) the driver and hardware went out of sync (the driver cleared the ict_index, while the hw kept it intact). Fix it by setting the flag when resetting ict. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: call d3_suspend/resume in d0i3 case as wellEliad Peller3-21/+34
Some CSR registers have to be configured also in case of suspend/resume with unified image (which doesn't includes reconfiguration flow). Reuse the existing d3_suspend/d3_resume trans ops, while making sure some configurations are a bit different, according to the wowlan type. After this change, we no longer need the special wowlan_d0i3 configurations done in iwl_pci_resume, as they are already being done in the d3_resume op. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: mvm: ignore CQM when setting beacon filtering in D0i3 enter flowGregory Greenman1-3/+4
CQM overwrites a few thresholds in the bf command. On the other hand, when entering D0i3 the thresholds are set to higher values on purpose, so ignore CQM in this case. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-08-04iwlwifi: mvm: fix beacon filtering temperature thresholds for D0i3Gregory Greenman1-1/+1
The slow filtering threshold should be higher in D0i3 case. Signed-off-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-09 14:44:43 +0300