summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-09-07ipw2200: use is_zero_ether_addr() and is_broadcast_ether_addr()Wei Yongjun1-9/+2
Using is_zero_ether_addr() and is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07ipw2100: use is_zero_ether_addr() and is_broadcast_ether_addr()Wei Yongjun1-9/+2
Using is_zero_ether_addr() and is_broadcast_ether_addr() instead of directly use memcmp() to determine if the ethernet address is all zeros. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07wireless: ath9k-htc: only load firmware in needMing Lei2-12/+25
It is not necessary to hold the firmware memory during the whole driver lifetime, and obviously it does waste memory. Suppose there are 4 ath9k-htc usb dongles working, kernel has to consume about 4*50KBytes RAM to cache firmware for all dongles. After applying the patch, kernel only caches one single firmware image in RAM for all ath9k-htc devices just during system suspend/resume cycle. When system is ready for loading firmware, ath9k-htc can request the loading from usersapce. During system resume, ath9k-htc still can load the firmware which was cached in kernel memory before system suspend. Cc: ath9k-devel@lists.ath9k.org Cc: "Luis R. Rodriguez" <mcgrof@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Cc: Senthil Balasubramanian <senthilb@qca.qualcomm.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07bcma: don't leak memory for PCIE, MIPS, GBIT coresSaul St. John1-0/+10
bcma_scan_bus allocates a bcma_core for each core found on the bus, but the memory for cores handled by the bcma driver itself was not being freed when the bus was unregistered. This patch adds special handling for the PCIE, MIPS, and GBIT COMMON cores, to ensure that their memory allocation is freed as well. Note that this patch doesn't address the memory allocated for the CC core, as that was corrected in my previous patch "bcma: register cc core driver, device." Cc: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Saul St. John <saul.stjohn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-09-07Merge branch 'for-john' of ↵John W. Linville6-39/+37
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-09-07Merge branch 'for-john' of ↵John W. Linville6-17/+18
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-09-05cfg80211: fix indentationHila Gonen1-1/+1
checkpatch pointed out an issue, fix it. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05iwlwifi: remove radio_config from eeprom_dataDavid Spinadel1-2/+0
No one uses it. Signed-off-by: David Spinadel <david.spinadel@intel.com> Reviewed-by: Amit Beka <amit.beka@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05iwlwifi: reduce overhead if tracing disabledJohannes Berg2-36/+23
Tracing commands builds an array of trace data items even when the tracepoint is disabled. Instead, loop in the tracepoint assignment. This reduces overhead if tracing is compiled into the driver but not enabled and slightly reduces overall driver size as well: text data bss dec hex filename 114514 6509 48 121071 1d8ef before/iwlwifi.ko 114189 6509 48 120746 1d7aa after/iwlwifi.ko Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Max Stepanov <Max.Stepanov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05iwlwifi: report A-MPDU statusJohannes Berg3-0/+13
Since the firmware will give us an A-MPDU bit and only a single PHY information packet for all the subframes in an A-MPDU, we can easily report the minimal A-MPDU information for radiotap. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05Merge remote-tracking branch 'wireless-next/master' into iwlwifi-nextJohannes Berg6557-122652/+353557
2012-09-05wext: include wireless event id when it has a size problemArend van Spriel1-4/+4
The wext code checks is the event data is within size limits. When this check fails a message is logged with violating size. This patch adds the event id to put us on the right track for resolving that violation. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05mac80211: don't use kerneldoc for ieee80211_add_rx_radiotap_headerJohannes Berg1-1/+1
Doing so creates warnings, but the function is internal and not part of the 802.11 docbooks, so it from kerneldoc. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05cfg80211: add kerneldoc entry for "vht_cap"Robert P. J. Day1-0/+1
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-05cfg80211: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-4/+2
Using list_move_tail() instead of list_del() + list_add_tail(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04iwlwifi: fix antenna bitmaskJohannes Berg1-1/+1
The device only supports a maximum of three antennas, and only three bits are used, the fourth bit is the A-MPDU indicator. The only consequence of this is reporting invalid information in radiotap, so this isn't an important change. Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-09-04mac80211: Do not check for valid hw_queues for P2P_DEVICEIlan Peer1-7/+9
A P2P Device interface does not have a netdev, and is not expected to be used for transmitting data, so there is no need to assign hw queues for it. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-23Merge branch 'for-john' of ↵John W. Linville3-1/+46
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
2012-08-22Merge branch 'for-john' of ↵John W. Linville15-93/+241
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
2012-08-22mac80211: Fix AP mode regressionSujith Manoharan1-1/+1
Commit mac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp changed the return value when the probe response template is not present. Revert to the earlier value of 1 - this fixes AP mode for drivers like ath9k. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-22carl9170: report A-MPDU statusChristian Lamparter2-4/+12
Because the hardware reports whenever an frame was either at the start, in the middle or at the end of a A-MPDU, we can easily report the information for radiotap. Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-22ath9k_htc: implement sta_rc_update() mac80211 callbackAntonio Quartulli1-0/+29
In case of changes in the supported rates set for a given station, it is now possible to use this callback to update the current internal state of the station in the htc driver. Reported-by: Gui Iribarren <gui@altermundi.net> Signed-off-by: Antonio Quartulli <ordex@autistici.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-22bcma: detect and register NAND flash deviceRafał Miłecki5-4/+48
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-22bcma: detect and register serial flash deviceRafał Miłecki6-4/+146
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-22Merge branch 'for-john' of ↵John W. Linville84-617/+1245
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Conflicts: drivers/net/wireless/mac80211_hwsim.c
2012-08-21Revert "rfkill: remove dead code"AceLan Kao2-0/+45
This reverts commit 2e48928d8a0f38c1b5c81eb3f1294de8a6382c68. Those functions are needed and should not be removed, or there is no way to set the rfkill led trigger name. Signed-off-by: AceLan Kao <acelan.kao@canonical.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-21iwlwifi: fix FW restart on init FWAmit Beka1-2/+7
When unregistered with mac80211, we can't call its functionality for FW restart, so avoid it and prevent automatic FW restart for the init firmware. Signed-off-by: Amit Beka <amit.beka@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-21iwlwifi: fix the preparation of the cardEmmanuel Grumbach1-9/+8
There is no need to check if the ownership has been relinquished but we should rather try to get it in a loop. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: clean up ieee80211_subif_start_xmitJohannes Berg1-17/+6
There's no need to carry around a return value that is always NETDEV_TX_OK anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: pass channel to ieee80211_send_probe_reqJohannes Berg4-7/+11
In multi-channel scenarios, the channel that we will transmit a probe request on isn't always the current channel (which will be NULL anyway) but will instead be the channel that the AP is on. Pass the channel to the ieee80211_send_probe_req() function so it can be used in the different scenarios. The scan code continues to pass the current channel, of course. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: convert ops checks to WARN_ONJohannes Berg1-7/+5
There's no need to BUG_ON when a driver registers invalid operations, warn and return an error. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: check operating channel in scanJohannes Berg1-5/+4
The optimisation of scanning only on the current channel should check the operating channel. Also modify it to compare channel pointer rather than the frequency. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use RX status band instead of current bandJohannes Berg1-1/+1
Even for single-channel devices it is possible that we switch the channel temporarily (e.g. for scanning) but while doing so process a received frame that was still received on the old channel, so checking the current band is racy. Use the band from status instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: don't assume channel is set in tracingJohannes Berg1-3/+6
With the move to multi-channel and away from drv_config(), hw.conf.channel will not always be set, only for devices using the current API instead of the new channel context APIs. Check the channel is set before adding its frequency to the trace data. Also break some overly long lines in the code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: use oper_channel in rate initJohannes Berg1-1/+1
Using hw.conf.channel is wrong as it could be the temporary channel if the station is added from the workqueue while the device is already on another channel. Use oper_channel instead. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove freq/chantype from debugfsJohannes Berg1-32/+0
You can now get these values through iw, and they conflict with multi-channel work. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove almost unused local variableJohannes Berg1-5/+2
In ieee80211_beacon_get_tim() we can use the txrc.sband instead of a separate local variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: mesh: don't use global channel typeJohannes Berg2-8/+10
Using local->_oper_channel_type in the mesh code is completely wrong as this value is the combination of the various interface channel types and can be a different value from the mesh interface in case there are multiple virtual interfaces. Use sdata->vif.bss_conf.channel_type instead as it tracks the per-vif channel type. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: simplify buffers in aes_128_cmac_vectorJohannes Berg1-5/+1
There's no need to use a single scratch buffer and calculate offsets into it, just use two separate buffers for the separate variables. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211_hwsim: add support for P2P DeviceJohannes Berg1-1/+3
Advertise support for P2P Device in hwsim to be able to test it. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTFJohannes Berg2-1/+19
Some devices like the current iwlwifi implementation require that the P2P interface address match the P2P Device address (only one P2P interface is supported.) Add the HW flag IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF that allows drivers to request that P2P Interfaces added while a P2P Device is active get the same MAC address by default. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: support P2P Device abstractionJohannes Berg10-96/+226
After cfg80211 got a P2P Device abstraction, add support to mac80211. Whether it really is supported or not will depend on whether or not the driver has support for it, but mac80211 needs to change to be able to support drivers that need a P2P Device. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20cfg80211: add P2P Device abstractionJohannes Berg9-20/+265
In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: make ieee80211_beacon_connection_loss_work staticJohannes Berg2-2/+1
There's no need to declare the function in the header file since it's only used in a single place, so make it static. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: check size of channel switch IE when parsingJohannes Berg3-11/+9
The channel switch IE has a fixed size, so we can discard it in parsing if it's not the right size and use the right struct pointer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: fix CSA handling timerJohannes Berg1-3/+2
The time until the channel switch is in TU, not in milliseconds, so use TU_TO_EXP_TIME() to correctly program the timer. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: clean up CSA handling codeJohannes Berg1-18/+16
Clean up the CSA handling code by moving some of it out of the if and using a C99 initializer for the struct passed to the driver method. While at it, also add a comment that we should wait for a beacon after switching the channel. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: remove unneeded 'bssid' variableJohannes Berg1-4/+2
There's no need to copy the BSSID just to print it, remove the unnecessary variable. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20mac80211: support A-MPDU status reportingJohannes Berg2-15/+80
Support getting A-MPDU status information from the drivers and reporting it to userspace via radiotap in the standard fields. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-08-20wireless: add radiotap A-MPDU status fieldJohannes Berg2-0/+13
Define the A-MPDU status field in radiotap, also update the radiotap parser for it and the MCS field that was apparently missed last time. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-11 03:52:39 +0300