summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-01-30iwl3945: fix deep sleep when removing the driver.Abbas, Mohamed3-7/+10
A warning message "MAC is in deep sleep" sometimes happen when user removes the driver. This warning is related to card not being ready. In __iwl3945_down function some of the going down steps are in wrong order, to fix this this patch do the following: 1- make sure we are calling iwl3945_apm_reset and iwl3945_apm_stop in the right order. 2- make sure we set CSR_GP_CNTRL_REG_FLAG_INIT_DONE in apm_reset before poll on CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY. 3- set correct polling counter. This fixes bug http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1834 Signed-off-by: mohamed abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwl3945: Use iwl-rfkillSamuel Ortiz6-199/+43
Here again, the rfkill routines are duplicated between agn and 3945. Let's move the agn one to iwlcore, and so we can get rid of the 3945 ones. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlagn: fix agn rate scalingAbbas, Mohamed1-8/+23
Sometime Tx reply rate different than what rate scale expecting causing rate scale to bail out. This could cause failing to commit LQ cmd. This patch will try to solve this instead of just bail out. It also make sure we start with a valid rate. Signed-off-by: mohamed abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: allow user to set max rateAbbas, Mohamed2-0/+45
allow user to set max rate through #iwconfig <inteface> rate XXX. mac80211 will try to force this if user set it, but driver is not in sync which cause mac80211 to report wrong current rate. This patch will check if max rate is set and force it in rate scaling Signed-off-by: mohamed abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Enable dynamic power save in ath9k.Vivek Natarajan6-4/+66
This patch implements dynamic power save feature for ath9k. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: add recognition of Intel WiFi Link 100 SeriesJay Sternberg4-0/+75
add configuration for new Intel WiFi Link 100 series as part of the iwlagn driver under the umbrella of 5000 family of devices. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: add recognition of Intel WiFi Link 6000 and 6050 SeriesJay Sternberg5-0/+229
add configuration for new Intel WiFi Link Series as part of the iwlagn driver under the umbrella of 5000 family of devices. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: remove static from 5000 structuresJay Sternberg2-2/+6
remove static from config structures which will be used by new hardware that is similar to 5000. This way the new devices can use them without the new structures having to be stored in the already overloaded iwl-5000.c file. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: correct Kconfig to prevent following entries from not indentingJay Sternberg1-9/+9
defining configurations that are not visible caused the following entries to not be indented. changing the tree structure to name the top level selection and have all others reference IWLWIFI directly corrects this issue. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: eliminate power_data_39.Winkler, Tomas4-74/+45
This patch eliminates 3945 power_data structure and make use of of iwl_power_data. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: remove unused or twice defined members in iwl_privWinkler, Tomas5-18/+12
This patch removes user_txpower_limit and max_channel_txpower_limit and use tx_power_user_lmt and tx_power_channel_lmt instead call_post_assoc_from_beacon is not used Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: kill scan39Winkler, Tomas2-8/+6
scan and scan39 can be represented by void * in iwl_priv Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwl3945: Use iwl-hcmd host command routinesSamuel Ortiz4-257/+34
With the previously added tfd related ops, we can now use the iwl-tx.c host command enqueue routine. Since the 3945 host command specific routines are identical to the agn ones, we can just remove them from the 3945 code. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: Add TFD library operationsSamuel Ortiz8-163/+176
The TFD structures for 3945 and agn HWs are fundamentally different. We thus need to define operations for attaching and freeing them. This will allow us to share a fair amount of code (cmd and tx queue related) between both drivers. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwl3945: Use iwl_txq_update_write_ptrSamuel Ortiz1-58/+9
The iwl3945 and the iwl versions are identical. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwl3945: add debugging for wrong command queueChatre, Reinette1-1/+8
We encountered a problem related to this BUG and need to obtain more debugging information. See bug report at http://marc.info/?l=linux-wireless&m=123147215829854&w=2 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: kill iwl3945_scan_cancel and iwl3945_scan_cancel_timeoutWinkler, Tomas1-64/+12
This patch removes iwl3945_scan_cancel and iwl3945_scan_cancel_timeout because iwl_scan_cancel iwl_scan_cancel_timeout are just same. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: fix iwl_mac_set_key and iwl3945_mac_set_keyWinkler, Tomas2-20/+13
This patch fix iwl_mac_set_key function changed in patch "mac80211: clean up set_key callback" 1. removing 'static' const u8 *addr' that can possible cause conflict when two or more NICs are present in the system. 2. simplifying functions Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlwifi: make iwl-power.c more readableWinkler, Tomas1-27/+24
This patch rearrange code in iwl-power.c function to make it a little more readable. No functional changes. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: Fix MFP Association Comeback to use Timeout Interval IEJouni Malinen4-8/+15
The separate Association Comeback Time IE was removed from IEEE 802.11w and the Timeout Interval IE (from IEEE 802.11r) is used instead. The editing on this is still somewhat incomplete in IEEE 802.11w/D7.0, but still, the use of Timeout Interval IE is the expected mechanism. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath5k: remove stop/start calls from within suspend/resumeBob Copeland1-24/+7
mac80211 now takes down interfaces automatically during suspend so doing it in the driver is unnecessary. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: add suspend/resume callbacksBob Copeland4-0/+137
This patch introduces suspend and resume callbacks to mac80211, allowing mac80211 to quiesce its state (bringing down interfaces, removing keys, etc) in preparation for suspend. cfg80211 will call the suspend hook before the device suspend, and resume hook after the device resume. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30cfg80211: add PM hooksJohannes Berg2-0/+36
This should help implement suspend/resume in mac80211, these hooks will be run before the device is suspended and after it resumes. Therefore, they can touch the hardware as much as they want to. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: Fix drop-unencrypted for management framesJouni Malinen1-1/+4
ADDBA request Action frame was sent out before 4-way handshake was completed and the initial 802.11w code ended up dropping the frame even if MFP was not enabled. While the sending of Action frames this early is not really a good idea (will break with MFP enabled), we should not break this for the MFP disabled case. This patch fixes ieee80211_tx_h_select_key() not to drop management frames if MFP is disabled. If MFP is enabled, Action frames will be dropped before keys are set per IEEE 802.11w/D7.0. Other robust management frames (i.e., Deauthentication and Disassociation frames) are allowed unprotected prior to key configuration. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwlagn: fix hw-rfkill while the interface is downHelmut Schaa1-54/+56
Currently iwlagn is not able to report hw-killswitch events while the interface is down. This has implications on user space tools (like NetworkManager) relying on rfkill notifications to bring the interface up once the wireless gets enabled through a hw killswitch. Thus, enable the device already in iwl_pci_probe instead of iwl_up and enable interrups while the interface is down in order to get notified about killswitch state changes. The firmware loading is still done in iwl_up. Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30iwl3945: fix some warnings when compiled without debugHelmut Schaa1-0/+6
Fix the following warnings if compiled without CONFIG_IWLWIFI_DEBUG. drivers/net/wireless/iwlwifi/iwl3945-base.c: In function ‘iwl3945_rx_reply_add_sta’: drivers/net/wireless/iwlwifi/iwl3945-base.c:2748: warning: unused variable ‘pkt’ drivers/net/wireless/iwlwifi/iwl3945-base.c: In function ‘iwl3945_rx_scan_results_notif’: drivers/net/wireless/iwlwifi/iwl3945-base.c:2903: warning: unused variable ‘notif’ drivers/net/wireless/iwlwifi/iwl3945-base.c: In function ‘iwl3945_rx_scan_complete_notif’: drivers/net/wireless/iwlwifi/iwl3945-base.c:2928: warning: unused variable ‘scan_notif’ Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: trivial documentation fix (mesh_nexthop_lookup()).Rami Rosen1-1/+1
This patch fixes the documentation of mesh_nexthop_lookup() in mesh_hwmp.c. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: trivial documentation fixes (enum mesh_path_flags).Rami Rosen1-3/+3
This patch fixes documentation of enum mesh_path_flags in mesh.h. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: remove mesh_plink_close() method.Rami Rosen2-31/+0
This patch removes mesh_plink_close() method as it is unused. Signed-off-by: Rami Rosen <ramirose@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30mac80211: cleanup kmalloc/memset -> kcallocWei Yongjun1-3/+1
Transform calls kmalloc/memset to a single kcalloc. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath5k: notice a negative keytypeRoel Kluin1-1/+1
To notice a negative keytype Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30rt2x00: Add LED_MODE_ASUS supportIvo van Doorn3-3/+9
When the led mode is asus, the activity led mode must be registered otherwise the second LED will not be enabled. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30rt2x00: conf_tx() only need register access for WMM queuesIvo van Doorn2-30/+30
conf_tx() in rt61pci and rt73usb only have to check once if the queue_idx indicates a non-WMM queue and break of the function immediately if that is the case. Only the WMM queues need to have the TX configuration written to the registers. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30rt2x00: Update copyright year to 2009Ivo van Doorn31-31/+31
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30Move orinoco Kconfig entries into drivers/net/wireless/orinoco/KconfigAndrey Borzenkov2-121/+121
Since driver now lives in separate subdirectory, move Kconfig entries in own file so they can be tweaked indepndently. It complements "orinoco: Move sources to a subdirectory". Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30p54spi: remove arch specific dependenciesChristian Lamparter2-19/+28
On Friday 16 January 2009 20:33:43 Kalle Valo wrote: > N800 and N810 support is not on mainline yet, for stlc45xx I decided > to add module parameters for the gpio numbers. Here's the commit from > stlc45xx repo: > > http://gitorious.org/projects/stlc45xx/repos/mainline/commits/35afc5df0027d02d49e6f5bf986dcc4deb4ee6cf This is the same patch for p54spi. It removes all N800/N810 specific code from p54spi, so the driver can be used on other architectures, or configurations as well. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30p54usb: fix conflict with recent usb changesChristian Lamparter1-6/+8
A recent change in the usb core "USB: change interface to usb_lock_device_for_reset()" conflicts with "p54usb: utilize usb_reset_device for 3887". Sadly, we have to call usb_reset_device before we can upload the firmware on 3887. Unless someone figures out how to reliably stop the 3887 so the hardware is still usable next time we want to start it. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Cleanup buffer type assignmentSujith1-17/+11
The buffer state is already cleared in ATH_TXBUF_RESET. Remove redundant code clearing the type variable. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Revamp TX aggregationSujith2-222/+93
This patch cleans up the convoluted buffer management logic for TX aggregation. Both aggregation creation and completion are addressed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Handle holding descriptor in TX completion properlySujith1-8/+11
If the current holding descriptor is the last one in the TX queue, *and* it has been marked as STALE, then move it to the free list and bail out, as it has already been processed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Add a helper function to wake mac80211 queuesSujith1-11/+18
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Merge queue draining functionsSujith4-57/+55
The TX queue draining routines have confusing names, rename them approprately and merge ath_drain_txdataq() with ath_drain_all_txq(). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Remove ath_tx_stopdma and call ath9k_hw_stoptxdma directlySujith1-13/+9
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Reorganize code in xmit.cSujith3-1424/+1180
This patch starts cleaning up all the crufty code in transmission path, grouping functions into logical blocks. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: Update short guard interval in rate controlSujith1-0/+2
The rate control algorithm needs to know if a STA allows short guard interval, fixing this allows RC to use the correct table. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: rateCodeToIndex is not used, remove itSujith2-14/+0
Calculation of rate indices from ratecode is done in recv.c in a straightforward manner for both HT and legacy rates. This variable is not needed anymore. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30nl80211: New command for adding extra IE(s) into management framesJouni Malinen7-6/+246
A new nl80211 command, NL80211_CMD_SET_MGMT_EXTRA_IE, can be used to add arbitrary IE data into the end of management frames. The interface allows extra IEs to be configured for each management frame subtype, but only some of them (ProbeReq, ProbeResp, Auth, (Re)AssocReq, Deauth, Disassoc) are currently accepted in mac80211 implementation. This makes it easier to implement IEEE 802.11 extensions like WPS and FT that add IE(s) into some management frames. In addition, this can be useful for testing and experimentation purposes. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: enable support for AR9100Gabor Juhos1-0/+3
Because we have support for the AR9100 devices now, we can enable them. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: fix null pointer dereference in ani monitor codeGabor Juhos1-3/+3
In 'ath9k_ani_reset' the 'ahp->ah_curani' will be initialized only if 'DO_ANI(ah)' true. In 'ath9k_hw_ani_monitor' we are using 'ahp->ah_curani' unconditionally, and it will cause a NULL pointer dereference on AR9100. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-01-30ath9k: fix ar5416Addac_9100 valuesGabor Juhos1-1/+1
Writing the register at offset 0x98c4 causes a deadlock on the AR913x SoCs. Although i don't have detailed knowledge about these registers, but if i change the register offset according to the 'ar5416Addac' table, it works. Additionally there is no reference to the 0x98c4 elsewhere. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Imre Kaloz <kaloz@openwrt.org> Tested-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 23:39:06 +0300