summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2008-01-31Merge branch 'for-2.6.25' of git://git.secretlab.ca/git/linux-2.6-mpc52xxPaul Mackerras25-443/+478
2008-01-29[POWERPC] 83xx: Clean up / convert mpc83xx board DTS files to v1 format.Paul Gortmaker15-985/+999
This patch converts the remaining 83xx boards to the dts-v1 format. This includes the mpc8313_rdb, mpc832x_mds, mpc8323_rdb, mpc8349emitx, mpc8349emitxgp and the mpc836x_mds. The mpc8315_rdb mpc834x_mds, mpc837[789]_*, and sbc8349 were already dts-v1 and only undergo minor changes for the sake of formatting consistency across the whole group of boards; i.e. the idea being that you can do a "diff -u board_A.dts board_B.dts" and see something meaningful. The general rule I've applied is that entries for values normally parsed by humans are left in decimal (i.e. IRQ, cache size, clock rates, basic counts and indexes) and all other data (i.e. reg and ranges, IRQ flags etc.) remain in hex. I've used dtc to confirm that the output prior to this changeset matches the output after this changeset is applied for all boards. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Only invalidate TLB0 and TLB1Kumar Gala1-10/+0
All current 85xx/e500 implementations only have two TLB arrays. We are wasting cycles by invalidating TLB2 and TLB3. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Fix typo in mpc837x compatible entriesKim Phillips3-3/+3
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: convert sbc85* boards to use machine_device_initcallKumar Gala2-8/+4
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: rework platform KconfigKumar Gala5-30/+910
* Allow multiple boards to be selected in a single build * Removed Kconfig option '83xx' which existed only for compat with arch/ppc * Removed Kconfig option 'PPC_MPC836x' since its not used * Renamed Kconfig option 'MPC834x' to 'PPC_MPC834x' to match others * Added a multiplatform 83xx defconfig (mpc83xx_defconfig). Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: rework platform KconfigKumar Gala4-27/+1536
* Allow multiple boards to be selected in a single build * Removed Kconfig option '85xx' which existed only for compat with arch/ppc * Added a multiplatform 85xx defconfig (mpc85xx_defconfig). This builds all 85xx boards except sbc8560 and stx_gp3 since these to boards have board specific ifdef in driver code that may break all other boards Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 86xx: Remove unused IRQ definesKumar Gala1-86/+0
86xx uses the flat device tree for all its needs so we dont need explicit IRQ info. Its not clear why this code existed since 86xx never existed in arch/ppc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: Explicitly set address-cells and size cells for muramPaul Gortmaker4-2/+10
Currently there are several dts that don't specify address or size cells for the muram. This causes dtc to use default values, one of which is an address-cells of two, and this breaks the parsing of the muram ranges, which is assuming an address-cells of one. For example: Warning (reg_format): "reg" property in /qe@e0100000/muram@10000/data-only@0 has invalid length (8 bytes) (#address-cells == 2, #size-cells == 1) Explicitly setting the address and size cells gets it parsed properly and gets rid of the four dtc warnings. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Convert StorCenter DTS file to /dts-v1/ format.Jon Loeliger1-35/+38
Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 86xx: Convert all 86xx DTS files to /dts-v1/ format.Jon Loeliger2-279/+281
Also fixed a few minor indent problems as well. Signed-off-by: Jon Loeliger <jdl@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[PPC] Remove 85xx from arch/ppcKumar Gala63-14608/+20
85xx exists in arch/powerpc as well as cuImage support to boot from a u-boot that doesn't support device trees. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[PPC] Remove 83xx from arch/ppcKumar Gala23-3097/+15
83xx exists in arch/powerpc as well as cuImage support to boot from a u-boot that doesn't support device trees. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc837x rdb defconfigKim Phillips1-0/+887
Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc837[789]_rdb dts filesKim Phillips3-0/+888
Add the dts files for the MPC838xE Reference Development Board (RDB). The board is a mini-ITX reference board with 256M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, SATA, and serial. the difference among the three files is the 8377 has two, the 8378 none, and the 8379 has four sata controllers. partially based on the 8379 mds device trees. Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add MPC837x RDB platform supportKim Phillips3-1/+107
primarily based on mpc837x mds code. Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add the mpc8315 rdb defconfigKim Phillips1-0/+1417
Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: ipic: add interrupt vector 94Kim Phillips1-0/+6
This is used on the mpc8315 SoC for TDM DMA error interrupts. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: enable FSL SATA driver config for Freescale SoCsKim Phillips1-1/+1
The mpc8315 shares the same SATA controller as the mpc837x, and likelihood is that future SoCs from Freescale will also. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add the MPC8315E RDB dtsKim Phillips1-0/+287
Add the dts for the MPC8315E Reference Development Board (RDB). The board is a mini-ITX reference board with 128M DDR2, 8M flash, 32M NAND, USB, PCI, gigabit ethernet, SATA, and serial. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: add base platform support for the mpc8315 rdb boardKim Phillips2-2/+3
mpc8315 identical to mpc8313 here, just check compatible. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: fold the mpc8313 platform into the mpc831x platformKim Phillips4-27/+18
prepare for adding support for the mpc8315 rdb, since they are identical wrt platform code. Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] fsl_spi: stop using device_type = "spi"Anton Vorontsov14-70/+96
Also: - rename "fsl_spi" to "fsl,spi"; - add and use cell-index property, if found; - split probing code out of fsl_spi_init, thus we can call it for legacy device_type probing and new "compatible" probing. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28spi_mpc83xx: use brg-frequency for SPI in QEAnton Vorontsov2-18/+34
In case of QE we can use brg-frequency (which is qeclk/2). Thus no need to divide sysclk in the spi_mpc83xx. This patch also adds code to use get_brgfreq() on QE chips. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28ucc_geth: get rid of device_type for mdioAnton Vorontsov5-7/+7
device_type property is bogus, thus use proper compatible. Also change compatible property to "fsl,ucc-mdio". Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] QE: get rid of most device_types and modelAnton Vorontsov11-66/+117
Now we're searching for "fsl,qe", "fsl,qe-muram", "fsl,qe-muram-data" and "fsl,qe-ic". Unfortunately it's still impossible to remove device_type = "qe" from the existing device trees because older u-boots are looking for it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: some minor cleanups for stx_gp3 and tqm85xxKumar Gala7-13/+5
* "simple-bus" covers all our needs for of_platform_bus_probe() * make device tree name just 'soc' not 'soc85..' Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: mpc834x_mds - Convert device tree source to dts-v1Paul Gortmaker1-125/+127
Move mpc834x_mds device tree source forward to dts-v1 format. Nothing too complex in this one, so it boils down to just adding a bunch of 0x in the right places and converting clock speeds to decimal. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] CPM: Move definition of buffer descriptor to cpm.hJochen Friedrich3-129/+73
Buffer descriptors are used by both CPM1 and CPM2. Move the definitions from the cpm dependent include file to common cpm.h Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] CPM: Rename commproc to cpm1 and cpm2_common.c to cpm2.cJochen Friedrich28-38/+38
Rename commproc.[ch] to cpm1.[ch] to be more consistent with cpm2. Also rename cpm2_common.c to cpm2.c as suggested by Scott Wood. Adjust the includes accordingly. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Get rid of conditional includes of board specific setupJochen Friedrich3-22/+2
Directly include mpc885ads.h from mpc885ads_setup.c. Now we can get rid of the arch dependent includes in mpc8xx.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Remove sysdev/commproc.hJochen Friedrich9-20/+28
Move cpm1 specific prototypes to asm/commproc.h and mpc8xx specific prototypes to asm/mpc8xx.h. Adjust includes accordingly. Remove now unneeded sysdev/commproc.h. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Remove unneeded and misspelled prototype m8xx_calibrate_decrJochen Friedrich1-1/+0
m8xx_calibrate_decr seems to be a misspelled prototype for mpc8xx_calibrate_decr. As it's not needed anyways, just remove it. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Rename m8xx_pic_init to mpc8xx_pics_initJochen Friedrich6-7/+6
m8xx_pic_init calls both mpc8xx_pic_init and cpm_pic_init. Renaming the function to use the same name space as the rest of the mpc8xx specific funtions and to be more meaningful. m8xx_pic_init is declared in ppc8xx_pic.h but defined nowhere in the ppc tree. Remove it. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 8xx: Remove unused m8xx_cpm_hostalloc/free/dump()Jochen Friedrich4-83/+0
m8xx_cpm_hostalloc is still defined in commproc.c, but no users are left in the kernel tree. m8xx_cpm_hostfree and m8xx_cpm_hostdump are only defined in the headers. Remove this dead code. Signed-off-by: Jochen Friedrich <jochen@scram.de> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add default config file for Wind River SBC8349 boardPaul Gortmaker1-0/+800
Default config file for SBC8349 board, suitable for use as with NFS as a root file system and gianfar as the NFS root device. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add device tree source for Wind River SBC834x board.Paul Gortmaker1-0/+243
This adds the device tree source for the Wind River SBC834x board. It is based on the MPC834x_MDS DTS, with the biggest difference being the lack of BCSR and the PCI2 that the MDS gets via the PIB. That, and this file is also dts-v1 format. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 83xx: Add support for Wind River SBC834x boardsPaul Gortmaker3-1/+124
This adds the basic support for the Wind River SBC834x boards. The SBC8349 is more common, although it should work on the SBC8347 board as well. Support is heavily based on the existing MPC834x_MDS code. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add default .config file for Wind River SBC8548Paul Gortmaker1-0/+741
This is a suitable .config file for building the WRS SBC8548 kernel to be used for NFS root via one of the TSEC interfaces and with serial console via the soc/16550 compatible UART. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8548 boardPaul Gortmaker1-0/+244
This adds a v1 device tree source for the Wind River SBC8548 board. The biggest difference between this and the MPC8548CDS reference platform is the absence of the CDS's Arcadia peripherals and physical access to the PCI#2 bus. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add basic support for Wind River SBC8548 boardPaul Gortmaker3-2/+178
This adds the basic support for the Wind River SBC8548 board, implemented as powerpc. It closely follows the implementation of the MPC8548CDS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add default .config file for Wind River SBC8560Paul Gortmaker1-0/+764
This is a suitable .config file for building the WRS SBC8560 kernel to be used for NFS root via one of the TSEC interfaces and with serial console via the 16550 compatible UART on the board. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] CPM2: Make support for the CPM2 optional on 8560 based boardsPaul Gortmaker2-8/+5
Currently there is no way to disable the CPM2 support. Some boards, like the SBC8560 have their own external UART and don't have any direct dependencies on the CPM for a serial console or anything else. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add v1 device tree source for Wind River SBC8560 boardPaul Gortmaker1-0/+330
This adds a v1 device tree source for the Wind River SBC8560 board. The biggest difference between this and the MPC8560ADS reference platform dts is the use of an external 16550 compatible UART instead of the CPM2. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 85xx: Add support for Wind River SBC8560 in arch/powerpcPaul Gortmaker3-2/+295
This adds support for the Wind River SBC8560 board, implemented as powerpc. It closely follows the implementation of the MPC8560ADS. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Reduce code duplication in legacy_serial, add UART parent typesPaul Gortmaker1-28/+17
The legacy_serial was treating each UART parent in a separate code block. Rather than continue this trend for the new parent IDs, this condenses all (soc, tsi, opb, plus two more new types) into one of_device_id array. The new types are wrs,epld-localbus for the Wind River sbc8560, and a more generic "simple-bus" as requested by Scott Wood. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] 82xx and embedded6xx: Use machine_*_initcall() hooks in platform codeGrant Likely3-12/+3
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Add docs for Freescale PowerQUICC SATA device tree nodesLi Yang1-0/+30
Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-28[POWERPC] Add docs for Freescale DMA & DMA channel device tree nodesZhang Wei1-0/+128
Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Ebony Zhu <ebony.zhu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2008-01-27[POWERPC] 85xx: Port TQM85xx boards over from arch/ppcKumar Gala11-0/+5300
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-02 14:27:19 +0300