summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-18serial: tegra: Add helper function for handling RX bufferJon Hunter1-42/+24
In the tegra UART driver there are three places where the RX DMA buffer is handled and pushed up to the tty layer. In all three instances the same functions are called and so instead of duplicating the code in three places, move this code to a new helper function and use this new function. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18serial: tegra: Remove redundant code and check in tegra_uart_stop_rx()Jon Hunter1-10/+7
The serial-tegra driver always uses DMA and hence the driver always allocates DMA channels. Therefore, the test to see if the RX DMA channel is initialised in tegra_uart_stop_rx() is unnecessary and so remove the test and the code that corresponds to the case where the RX DMA channel is not initialised. Please note that the call to tegra_uart_stop_rx() should always be before the call to tegra_uart_shutdown() which will uninitialise the RX DMA channel. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18serial: tegra: Remove unnecessary return statementsJon Hunter1-11/+0
Some functions in the serial-tegra driver have unnecessary return statements at the end of a void function and so remove them. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18serial: tegra: Handle another RX race conditionJon Hunter1-8/+2
Commit 853a699739fe ("serial: tegra: handle race condition on uart rx side") attempted to fix a race condition between the RX end of transmission interrupt and RX DMA completion callback. Despite this fix there is still another case where these two paths can race and result in duplicated data. The race condition is as follows: 1. DMA completion interrupt occurs and schedules tasklet to call DMA callback. 2. DMA callback for the UART driver starts to execute. This will copy the data from the DMA buffer and restart the DMA. This is done under uart port spinlock. 3. During the callback, UART interrupt is raised for end of receive. The UART ISR runs and waits to acquire port spinlock held by the DMA callback. 4. DMA callback gives up spinlock after copying the data, but before restarting DMA. 5. UART ISR acquires the spin lock and reads the same DMA buffer because DMA has not been restarted yet. The release of the spinlock during the DMA callback was introduced by commit 9b88748b362c ("tty: serial: tegra: drop uart_port->lock before calling tty_flip_buffer_push()") to fix a spinlock lock-up issue when calling tty_flip_buffer_push(). However, since then commit a9c3f68f3cd8 ("tty: Fix low_latency BUG") migrated tty_flip_buffer_push() to always use a workqueue, allowing tty_flip_buffer_push() to be called from within atomic sections. Therefore, we can remove the unlocking of the spinlock from the DMA callback and UART ISR and this will ensure that the race condition no longer occurs. Reported-by: Christopher Freeman <cfreeman@nvidia.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18serial: 8250_omap: Remove RTS clearPeter Hurley1-1/+0
Clearing UART_MCR_RTS or UART_MCR_XONANY is unnecessary; these bits are never set in the shadow mcr. The RTS clear is especially confusing. Signed-off-by: Peter Hurley <peter@hurleysoftware.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18serial: Enable Freescale 16550 workaround on armScott Wood2-2/+7
The same serial hardware is present on LS2080A which is arm64, and LS1021A which is arm32, so don't limit the workaround to PPC. Unlike PPC which uses arch/powerpc/kernel/legacy_serial.c, the ARM targets use drivers/tty/serial/of_serial.c, so add the handle_irq override check there as well. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18tty: serial: men_z135_uart.c: use mcb memory region size instead of ↵Andreas Werner1-8/+15
hardcoded one There is no need to hardcode the MEN_Z135_MEM_SIZE. The MCB subsystem already knowns the size which is located in the chameleon table. MCB parse the chameleon table to get the resources of each IP and provide the mcb_request_mem function to get those resources. Use mcb_request_mem to get the resources. This function also takes care of the memory region naming allocated by the driver for each of the instances. Signed-off-by: Andreas Werner <andy@wernerandy.de> Acked-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-18serial: atmel: fix compiler warning on address castAndre Przywara1-1/+1
Turning on KVM and LPAE support on top of a multi_v7_defconfig will produce a compiler warning in the Atmel serial driver: drivers/tty/serial/atmel_serial.c: In function 'atmel_verify_port': drivers/tty/serial/atmel_serial.c:2299:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] if ((void *)port->mapbase != ser->iomem_base) ^ Fix that by using the cast on the right hand side instead, as similar code already does in other drivers. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-12Merge 4.3-rc5 into tty-nextGreg Kroah-Hartman421-2011/+3234
We want the tty fixes and reverts in here as well so that people can properly test and use it. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-11Linux 4.3-rc5v4.3-rc5Linus Torvalds1-2/+2
2015-10-11Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fix from Thomas Gleixner: "Fix a long standing state race in finish_task_switch()" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/core: Fix TASK_DEAD race in finish_task_switch()
2015-10-11Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds3-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Glexiner: "Fix build breakage on powerpc in perf tools" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools: Fix build break on powerpc due to sample_reg_masks
2015-10-11Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull maintainer email update from Thomas Gleixner: "Change Matt Fleming's email address in the maintainers file" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Change Matt Fleming's email address
2015-10-11Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "Three trivial commits: - Fix a kerneldoc regression - Export handle_bad_irq to unbreak a driver in next - Add an accessor for the of_node field so refactoring in next does not depend on merge ordering" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqdomain: Add an accessor for the of_node field genirq: Fix handle_bad_irq kerneldoc comment genirq: Export handle_bad_irq
2015-10-11Merge tag 'scsi-fixes' of ↵Linus Torvalds3-14/+33
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "This is a set of three bug fixes, two of which are regressions from recent updates (the 3ware one from 4.1 and the device handler fixes from 4.2)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: 3w-9xxx: don't unmap bounce buffered commands scsi_dh: Use the correct module name when loading device handler libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop
2015-10-11Merge tag 'md/4.3-rc4-fix' of git://neil.brown.name/mdLinus Torvalds2-4/+4
Pull md bugfix from Neil Brown: "One bug fix for raid1/raid10. Very careless bug earler in 4.3-rc, now fixed :-)" * tag 'md/4.3-rc4-fix' of git://neil.brown.name/md: crash in md-raid1 and md-raid10 due to incorrect list manipulation
2015-10-11MAINTAINERS: Change Matt Fleming's email addressMatt Fleming1-2/+2
My Intel email address will soon expire. Replace it with my personal address so people still know where to send patches. Signed-off-by: Matt Fleming <matt.fleming@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1444494136-10333-1-git-send-email-matt@codeblueprint.co.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-10Merge tag 'usb-4.3-rc5' of ↵Linus Torvalds9-4/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small USB and PHY fixes and quirk updates for 4.3-rc5. Nothing major here, full details in the shortlog, and all of these have been in linux-next for a while" * tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: Add device quirk for Logitech PTZ cameras USB: chaoskey read offset bug USB: Add reset-resume quirk for two Plantronics usb headphones. usb: renesas_usbhs: Add support for R-Car H3 usb: renesas_usbhs: fix build warning if 64-bit architecture usb: gadget: bdc: fix memory leak phy: berlin-sata: Fix module autoload for OF platform driver phy: rockchip-usb: power down phy when rockchip phy probe phy: qcom-ufs: fix build error when the component is built as a module
2015-10-10Merge tag 'tty-4.3-rc5' of ↵Linus Torvalds6-28/+79
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a few bug fixes for the tty core that resolve reported issues, and some serial driver fixes as well (including the much-reported imx driver problem) All of these have been in linux-next with no reported problems" * tag 'tty-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: drivers/tty: require read access for controlling terminal serial: 8250: add uart_config entry for PORT_RT2880 tty: fix data race on tty_buffer.commit tty: fix data race in tty_buffer_flush tty: fix data race in flush_to_ldisc tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c serial: atmel: fix error path of probe function tty: don't leak cdev in tty_cdev_add() Revert "serial: imx: remove unbalanced clk_prepare"
2015-10-10Merge tag 'staging-4.3-rc5' of ↵Linus Torvalds2-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging fixes from Greg KH: "Here are two tiny staging tree fixes for 4.3-rc5. One fixes the broken speakup subsystem as reported by a user, and the other removes an entry in the MAINTAINERS file for a developer that doesn't want to be listed anymore" * tag 'staging-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: speakup: fix speakup-r regression MAINTAINERS: Remove myself as nvec co-maintainer
2015-10-10Merge tag 'char-misc-4.3-rc5' of ↵Linus Torvalds4-8/+19
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small fixes for some misc drivers that resolve some reported issues. All of these have been linux-next for a while" * tag 'char-misc-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mcb: Fix error handling in mcb_pci_probe() mei: hbm: fix error in state check logic nvmem: sunxi: Check for memory allocation failure nvmem: core: Fix memory leak in nvmem_cell_write nvmem: core: Handle shift bits in-place if cell->nbits is non-zero nvmem: core: fix the out-of-range leak in read/write()
2015-10-10Merge git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-12/+8
Pull MIPS fixes from Ralf Baechle: - MIPS didn't define the new ioremap_uc. Defined it as an alias for ioremap_uncached. - Replace workaround for MIPS16 build issue with a correct one. * git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Define ioremap_uc MIPS: UAPI: Ignore __arch_swab{16,32,64} when using MIPS16 Revert "MIPS: UAPI: Fix unrecognized opcode WSBH/DSBH/DSHD when using MIPS16."
2015-10-10Merge branch 'stable/for-linus-4.3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fixlet from Konrad Rzeszutek Wilk: "Enable the SWIOTLB under 32-bit PAE kernels. Nowadays most distros enable this due to CONFIG_HYPERVISOR|XEN=y which select SWIOTLB. But for those that are not interested in virtualization and wanting to use 32-bit PAE kernels and wanting to have working DMA operations - this configures it for them" * 'stable/for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: Enable it under x86 PAE
2015-10-10namei: results of d_is_negative() should be checked after dentry revalidationTrond Myklebust1-2/+6
Leandro Awa writes: "After switching to version 4.1.6, our parallelized and distributed workflows now fail consistently with errors of the form: T34: ./regex.c:39:22: error: config.h: No such file or directory From our 'git bisect' testing, the following commit appears to be the possible cause of the behavior we've been seeing: commit 766c4cbfacd8" Al Viro says: "What happens is that 766c4cbfacd8 got the things subtly wrong. We used to treat d_is_negative() after lookup_fast() as "fall with ENOENT". That was wrong - checking ->d_flags outside of ->d_seq protection is unreliable and failing with hard error on what should've fallen back to non-RCU pathname resolution is a bug. Unfortunately, we'd pulled the test too far up and ran afoul of another kind of staleness. The dentry might have been absolutely stable from the RCU point of view (and we might be on UP, etc), but stale from the remote fs point of view. If ->d_revalidate() returns "it's actually stale", dentry gets thrown away and the original code wouldn't even have looked at its ->d_flags. What we need is to check ->d_flags where 766c4cbfacd8 does (prior to ->d_seq validation) but only use the result in cases where we do not discard this dentry outright" Reported-by: Leandro Awa <lawa@nvidia.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=104911 Fixes: 766c4cbfacd8 ("namei: d_is_negative() should be checked...") Tested-by: Leandro Awa <lawa@nvidia.com> Cc: stable@vger.kernel.org # v4.1+ Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com> Acked-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-10-10Merge tag 'pm+acpi-4.3-rc5' of ↵Linus Torvalds3-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael Wysocki: "These are four fixes for bugs in the devfreq and cpufreq subsystems, including two regression fixes (one for a recent regression and one for a problem introduced in 4.2). Specifics: - Two fixes for cpufreq regressions, an acpi-cpufreq driver one introduced during the 4.2 cycle when we started to preserve cpufreq directories for offline CPUs and a general one introduced recently (Srinivas Pandruvada). - Two devfreq fixes, one for a double kfree() in an error code path and one for a confusing sysfs-related failure (Geliang Tang, Tobias Jakobi)" * tag 'pm+acpi-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: prevent lockup on reading scaling_available_frequencies cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus PM / devfreq: fix double kfree PM / devfreq: Fix governor_store()
2015-10-10Merge branch 'strscpy' of ↵Linus Torvalds1-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull strscpy powerpc fix from Chris Metcalf. Fix powerpc big-endian build. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: arch/powerpc: provide zero_bytemask() for big-endian
2015-10-10Merge tag 'sound-4.3-rc5' of ↵Linus Torvalds14-49/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "We see various small fixes, but nothing looks too scary, all are small gentle bug fixes: - Most of changes are for ASoC codecs: Realtek, SGTL5000, TAS2552, TLV320, WM8962 - A couple of dwc and imx-ssi fixes - Usual oneliner HD-audio quirks - An old emux synth code fix" * tag 'sound-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: MAINTAINERS: Remove wm97xx entry ASoC: tas2552: fix dBscale-min declaration ALSA: synth: Fix conflicting OSS device registration on AWE32 ALSA: hda - Disable power_save_node for IDT 92HD73xx chips ALSA: hda - Apply SPDIF pin ctl to MacBookPro 12,1 ALSA: hda: Add dock support for ThinkPad T550 ASoC: dwc: fix dma stop transferring issue ASoC: dwc: correct irq clear method ASoC: tlv320aic3x: Prevent writing reserved registers on tlv320aic3104 CODECs ASoC: rt5645: Correct the naming and setting of ADC Boost Volume Control ASoC: sgtl5000: fix wrong register MIC_BIAS_VOLTAGE setup on probe ASoC: wm8962: balance pm_runtime_enable ASoC: imx-ssi: Fix DAI hardware signal inversions ASoC: sgtl5000: fix error message output for MicBias voltage ASoC: db1200: Fix DAI link format for db1300 and db1550
2015-10-10Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-25/+9
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A Samsung driver fix and a handful of TI driver fixes" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: dflt: fix enable_reg validity check clk: ti: fix dual-registration of uart4_ick clk: ti: clk-7xx: Remove hardwired ABE clock configuration clk: samsung: fix cpu clock's flags checking
2015-10-10Merge tag 'mmc-v4.3-rc4' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds5-6/+22
Pull MMC fixes from Ulf Hansson: "MMC host: - omap_hsmmc: Fix boot regressions for omap4430 - omap_hsmmc: Fix legacy boot regression for omap3 - sdhci-pxav3: Fix some clock issues for Armada 38x - sdhci-pxav3: Fix error handling at probe - sdhci-of-at91: Fix clock stabilization problem" * tag 'mmc-v4.3-rc4' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk mmc: sdhci: add quirk SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST mmc: sdhci-pxav3: fix error handling of armada_38x_quirks mmc: sdhci-pxav3: disable clock inversion for HS MMC cards mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driver mmc: host: omap_hsmmc: Fix MMC for omap3 legacy booting Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status"
2015-10-10Merge tag 'dm-4.3-fixes-2' of ↵Linus Torvalds9-27/+44
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull dm fixes from Mike Snitzer: "Three stable fixes: - DM core AB-BA deadlock fix in the device destruction path (vs device creation's DM table swap). - DM raid fix to properly round up the region_size to the next power-of-2. - DM cache fix for a NULL pointer seen while switching from the "cleaner" cache policy. Two fixes for regressions introduced during the 4.3 merge: - request-based DM error propagation regressed due to incorrect changes introduced when adding the bi_error field to bio. - DM snapshot fix to only support snapshots that overflow if the client (e.g. lvm2) is prepared to deal with the associated snapshot status interface change" * tag 'dm-4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm snapshot: add new persistent store option to support overflow dm cache: fix NULL pointer when switching from cleaner policy dm: fix request-based dm error reporting dm raid: fix round up of default region size dm: fix AB-BA deadlock in __dm_destroy()
2015-10-10Merge branch 'for-linus-4.3' of ↵Linus Torvalds7-17/+35
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull btrfs fixes from Chris Mason: "These are small and assorted. Neil's is the oldest, I dropped the ball thinking he was going to send it in" * 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: support NFSv2 export Btrfs: open_ctree: Fix possible memory leak Btrfs: fix deadlock when finalizing block group creation Btrfs: update fix for read corruption of compressed and shared extents Btrfs: send, fix corner case for reference overwrite detection
2015-10-10Merge tag 'nfsd-4.3-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-2/+4
Pull nfsd bugfix from Bruce Fields: "Just one RDMA bugfix" * tag 'nfsd-4.3-1' of git://linux-nfs.org/~bfields/linux: svcrdma: handle rdma read with a non-zero initial page offset
2015-10-10Merge tag 'fixes-for-linus' of ↵Linus Torvalds14-9/+41
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Arnd Bergmann: "The fixes for this week include one small patch that was years in the making and that finally fixes using all eight CPUs on exynos542x. The rest are lots of minor changes for sunxi, imx, exynos and shmobile - fixing the minimum voltage for Allwinner A20 - thermal boot issue on SMDK5250. - invalid clock used for FIMD IOMMU. - audio on Renesas r8a7790/r8a7791 - invalid clock used for FIMD IOMMU - LEDs on exynos5422-odroidxu3-common - usb pin control for imx-rex - imx53: fix PMIC interrupt level - a Makefile typo" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420 ARM: dts: Fix bootup thermal issue on smdk5250 ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for sound ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain for sound arm-cci500: Don't enable PMU driver by default ARM: dts: fix usb pin control for imx-rex dts ARM: imx53: qsrb: fix PMIC interrupt level ARM: imx53: include IRQ dt-bindings header ARM: dts: add suspend opp to exynos4412 ARM: dts: Fix LEDs on exynos5422-odroidxu3 ARM: EXYNOS: reset Little cores when cpu is up ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications
2015-10-09dm snapshot: add new persistent store option to support overflowMike Snitzer6-18/+37
Commit 76c44f6d80 introduced the possibly for "Overflow" to be reported by the snapshot device's status. Older userspace (e.g. lvm2) does not handle the "Overflow" status response. Fix this incompatibility by requiring newer userspace code, that can cope with "Overflow", request the persistent store with overflow support by using "PO" (Persistent with Overflow) for the snapshot store type. Reported-by: Zdenek Kabelac <zkabelac@redhat.com> Fixes: 76c44f6d80 ("dm snapshot: don't invalidate on-disk image on snapshot write overflow") Reviewed-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2015-10-09Merge branches 'pm-devfreq' and 'pm-cpufreq'Rafael J. Wysocki289-1624/+2532
* pm-devfreq: PM / devfreq: fix double kfree PM / devfreq: Fix governor_store() * pm-cpufreq: cpufreq: prevent lockup on reading scaling_available_frequencies cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus
2015-10-09irqdomain: Add an accessor for the of_node fieldMarc Zyngier1-0/+5
As we're about to remove the of_node field from the irqdomain structure, introduce an accessor for it. Subsequent patches will take care of the actual repainting. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1444402211-1141-1-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09genirq: Fix handle_bad_irq kerneldoc commentArnd Bergmann1-1/+0
A recent cleanup removed the 'irq' parameter from many functions, but left the documentation for this in place for at least one function. This removes it. Fixes: bd0b9ac405e1 ("genirq: Remove irq argument from irq flow handlers") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: kbuild-all@01.org Cc: Austin Schuh <austin@peloton-tech.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/5400000.cD19rmgWjV@wuerfel Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09genirq: Export handle_bad_irqArnd Bergmann1-0/+1
A cleanup of the omap gpio driver introduced a use of the handle_bad_irq() function in a device driver that can be a loadable module. This broke the ARM allmodconfig build: ERROR: "handle_bad_irq" [drivers/gpio/gpio-omap.ko] undefined! This patch exports the handle_bad_irq symbol in order to allow the use in modules. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Santosh Shilimkar <ssantosh@kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Austin Schuh <austin@peloton-tech.com> Cc: Tony Lindgren <tony@atomide.com> Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/5847725.4IBopItaOr@wuerfel Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-09dm cache: fix NULL pointer when switching from cleaner policyJoe Thornber1-1/+1
The cleaner policy doesn't make use of the per cache block hint space in the metadata (unlike the other policies). When switching from the cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block) was observed. The crash was caused by bugs in dm-cache-metadata.c when trying to skip creation of the hint btree. The minimal fix is to change hint size for the cleaner policy to 4 bytes (only hint size supported). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
2015-10-09crash in md-raid1 and md-raid10 due to incorrect list manipulationMikulas Patocka2-4/+4
The commit 55ce74d4bfe1b9444436264c637f39a152d1e5ac (md/raid1: ensure device failure recorded before write request returns) is causing crash in the LVM2 testsuite test shell/lvchange-raid.sh. For me the crash is 100% reproducible. The reason for the crash is that the newly added code in raid1d moves the list from conf->bio_end_io_list to tmp, then tests if tmp is non-empty and then incorrectly pops the bio from conf->bio_end_io_list (which is empty because the list was alrady moved). Raid-10 has a similar bug. Kernel Fault: Code=15 regs=000000006ccb8640 (Addr=0000000100000000) CPU: 3 PID: 1930 Comm: mdX_raid1 Not tainted 4.2.0-rc5-bisect+ #35 task: 000000006cc1f258 ti: 000000006ccb8000 task.ti: 000000006ccb8000 YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00001000000001001111111000001111 Not tainted r00-03 000000ff0804fe0f 000000001059d000 000000001059f818 000000007f16be38 r04-07 000000001059d000 000000007f16be08 0000000000200200 0000000000000001 r08-11 000000006ccb8260 000000007b7934d0 0000000000000001 0000000000000000 r12-15 000000004056f320 0000000000000000 0000000000013dd0 0000000000000000 r16-19 00000000f0d00ae0 0000000000000000 0000000000000000 0000000000000001 r20-23 000000000800000f 0000000042200390 0000000000000000 0000000000000000 r24-27 0000000000000001 000000000800000f 000000007f16be08 000000001059d000 r28-31 0000000100000000 000000006ccb8560 000000006ccb8640 0000000000000000 sr00-03 0000000000249800 0000000000000000 0000000000000000 0000000000249800 sr04-07 0000000000000000 0000000000000000 0000000000000000 0000000000000000 IASQ: 0000000000000000 0000000000000000 IAOQ: 000000001059f61c 000000001059f620 IIR: 0f8010c6 ISR: 0000000000000000 IOR: 0000000100000000 CPU: 3 CR30: 000000006ccb8000 CR31: 0000000000000000 ORIG_R28: 000000001059d000 IAOQ[0]: call_bio_endio+0x34/0x1a8 [raid1] IAOQ[1]: call_bio_endio+0x38/0x1a8 [raid1] RP(r2): raid_end_bio_io+0x88/0x168 [raid1] Backtrace: [<000000001059f818>] raid_end_bio_io+0x88/0x168 [raid1] [<00000000105a4f64>] raid1d+0x144/0x1640 [raid1] [<000000004017fd5c>] kthread+0x144/0x160 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 55ce74d4bfe1 ("md/raid1: ensure device failure recorded before write request returns.") Fixes: 95af587e95aa ("md/raid10: ensure device failure recorded before write request returns.") Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-08cpufreq: prevent lockup on reading scaling_available_frequenciesSrinivas Pandruvada1-1/+3
When scaling_available_frequencies is read on an offlined cpu, then either lockup or junk values are displayed. This is caused by freed freq_table, which policy is using. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-08cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpusSrinivas Pandruvada1-0/+3
When freqdomain_cpus attribute is read from an offlined cpu, it will cause crash. This change prevents calling cpufreq_show_cpus when policy driver_data is NULL. Crash info: [ 170.814949] BUG: unable to handle kernel NULL pointer dereference at 0000000000000018 [ 170.814990] IP: [<ffffffff813b2490>] _find_next_bit.part.0+0x10/0x70 [ 170.815021] PGD 227d30067 PUD 229e56067 PMD 0 [ 170.815043] Oops: 0000 [#2] SMP [ 170.816022] CPU: 3 PID: 3121 Comm: cat Tainted: G D OE 4.3.0-rc3+ #33 ... ... [ 170.816657] Call Trace: [ 170.816672] [<ffffffff813b2505>] ? find_next_bit+0x15/0x20 [ 170.816696] [<ffffffff8160e47c>] cpufreq_show_cpus+0x5c/0xd0 [ 170.816722] [<ffffffffa031a409>] show_freqdomain_cpus+0x19/0x20 [acpi_cpufreq] [ 170.816749] [<ffffffff8160e65b>] show+0x3b/0x60 [ 170.816769] [<ffffffff8129b31c>] sysfs_kf_seq_show+0xbc/0x130 [ 170.816793] [<ffffffff81299be3>] kernfs_seq_show+0x23/0x30 [ 170.816816] [<ffffffff81240f2c>] seq_read+0xec/0x390 [ 170.816837] [<ffffffff8129a64a>] kernfs_fop_read+0x10a/0x160 [ 170.816861] [<ffffffff8121d9b7>] __vfs_read+0x37/0x100 [ 170.816883] [<ffffffff813217c0>] ? security_file_permission+0xa0/0xc0 [ 170.816909] [<ffffffff8121e2e3>] vfs_read+0x83/0x130 [ 170.816930] [<ffffffff8121f035>] SyS_read+0x55/0xc0 ... ... [ 170.817185] ---[ end trace bc6eadf82b2b965a ]--- Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.2+ <stable@vger.kernel.org> # 4.2+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-10-08mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirkludovic.desroches@atmel.com1-0/+1
The Atmel sdhci device needs the SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk. Without it, the internal clock could never stabilised when changing the sd clock frequency. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci: add quirk SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RSTludovic.desroches@atmel.com2-0/+7
The Atmel sdhci device needs a new quirk. sdhci_set_clock set the Clock Control Register to 0 before computing the new value and writing it. It disables the internal clock which causes a reset mecanism. If we write the new value before this reset mecanism is done, it will prevent the stabilisation of the internal clock, so a delay is needed. This delay is about 2-3 cycles of the base clock. To be safe, a 1 ms delay is used. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci-pxav3: fix error handling of armada_38x_quirksMarcin Wojtas1-1/+1
In case of armada_38x_quirks error, all clocks should be cleaned-up, same as after mv_conf_mbus_windows failure. Signed-off-by: Marcin Wojtas <mw@semihalf.com> Cc: <stable@vger.kernel.org> # v4.2 Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci-pxav3: disable clock inversion for HS MMC cardsNadav Haklai1-0/+3
According to 'FE-2946959' erratum the clock inversion option is needed to support slow frequencies when the card input hold time requirement is high. This setting is not required for high speed MMC and might cause timing violation. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Cc: <stable@vger.kernel.org> # v4.2 Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driverNadav Haklai1-0/+1
shci-pxav3 driver is enabling by default the SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN quirk. However this quirk is not required for Armada 38x and leads to wrong clock setting in the divider. Signed-off-by: Nadav Haklai <nadavh@marvell.com> Signed-off-by: Marcin Wojtas <mw@semihalf.com> Cc: <stable@vger.kernel.org> # v4.2 Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08arch/powerpc: provide zero_bytemask() for big-endianChris Metcalf1-0/+5
For some reason, only the little-endian flavor of powerpc provided the zero_bytemask() implementation. Reported-by: Michal Sojka <sojkam1@fel.cvut.cz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Chris Metcalf <cmetcalf@ezchip.com>
2015-10-08mmc: host: omap_hsmmc: Fix MMC for omap3 legacy bootingTony Lindgren1-3/+3
Starting with commit 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") MMC on omap3 stopped working for legacy booting. This is because legacy booting sets up some of the resource in the platform init code, and for optional regulators always seem to return -EPROBE_DEFER for the legacy booting. Let's fix the issue by checking for device tree based booting for now. Then when omap3 boots in device tree only mode, this patch can be just reverted. Fixes: 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-08Revert "mmc: host: omap_hsmmc: use regulator_is_enabled to find pbias status"Tony Lindgren1-2/+6
This reverts commit c55d7a0553643a7e8f120688b82b594471084d3c. Without reverting this commit we get "unbalanced disables for pbias_mmc_omap4" errors on omap4430. It seems that 4430 and 4460 behave in a different way for the PBIAS regulator registers and until that has been debugged further we cannot rely on the regulator status registers in hardare on 4430. Fixes: 7d607f917008 ("mmc: host: omap_hsmmc: use devm_regulator_get_optional() for vmmc") Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Nishanth Menon <nm@ti.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 00:09:31 +0300