| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Link: https://lore.kernel.org/r/20250408104815.295196624@linuxfoundation.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a8dfb2168906944ea61acfc87846b816eeab882d upstream.
If the file system is corrupted, the header.stblindex variable
may become greater than 127. Because of this, an array access out
of bounds may occur:
------------[ cut here ]------------
UBSAN: array-index-out-of-bounds in fs/jfs/jfs_dtree.c:3096:10
index 237 is out of range for type 'struct dtslot[128]'
CPU: 0 UID: 0 PID: 5822 Comm: syz-executor740 Not tainted 6.13.0-rc4-syzkaller-00110-g4099a71718b0 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120
ubsan_epilogue lib/ubsan.c:231 [inline]
__ubsan_handle_out_of_bounds+0x121/0x150 lib/ubsan.c:429
dtReadFirst+0x622/0xc50 fs/jfs/jfs_dtree.c:3096
dtReadNext fs/jfs/jfs_dtree.c:3147 [inline]
jfs_readdir+0x9aa/0x3c50 fs/jfs/jfs_dtree.c:2862
wrap_directory_iterator+0x91/0xd0 fs/readdir.c:65
iterate_dir+0x571/0x800 fs/readdir.c:108
__do_sys_getdents64 fs/readdir.c:403 [inline]
__se_sys_getdents64+0x1e2/0x4b0 fs/readdir.c:389
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
---[ end trace ]---
Add a stblindex check for corruption.
Reported-by: syzbot <syzbot+9120834fc227768625ba@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=9120834fc227768625ba
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Cc: stable@vger.kernel.org
Signed-off-by: Roman Smirnov <r.smirnov@omp.ru>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit fdf480da5837c23b146c4743c18de97202fcab37 upstream.
During the "size_check" label in ea_get(), the code checks if the extended
attribute list (xattr) size matches ea_size. If not, it logs
"ea_get: invalid extended attribute" and calls print_hex_dump().
Here, EALIST_SIZE(ea_buf->xattr) returns 4110417968, which exceeds
INT_MAX (2,147,483,647). Then ea_size is clamped:
int size = clamp_t(int, ea_size, 0, EALIST_SIZE(ea_buf->xattr));
Although clamp_t aims to bound ea_size between 0 and 4110417968, the upper
limit is treated as an int, causing an overflow above 2^31 - 1. This leads
"size" to wrap around and become negative (-184549328).
The "size" is then passed to print_hex_dump() (called "len" in
print_hex_dump()), it is passed as type size_t (an unsigned
type), this is then stored inside a variable called
"int remaining", which is then assigned to "int linelen" which
is then passed to hex_dump_to_buffer(). In print_hex_dump()
the for loop, iterates through 0 to len-1, where len is
18446744073525002176, calling hex_dump_to_buffer()
on each iteration:
for (i = 0; i < len; i += rowsize) {
linelen = min(remaining, rowsize);
remaining -= rowsize;
hex_dump_to_buffer(ptr + i, linelen, rowsize, groupsize,
linebuf, sizeof(linebuf), ascii);
...
}
The expected stopping condition (i < len) is effectively broken
since len is corrupted and very large. This eventually leads to
the "ptr+i" being passed to hex_dump_to_buffer() to get closer
to the end of the actual bounds of "ptr", eventually an out of
bounds access is done in hex_dump_to_buffer() in the following
for loop:
for (j = 0; j < len; j++) {
if (linebuflen < lx + 2)
goto overflow2;
ch = ptr[j];
...
}
To fix this we should validate "EALIST_SIZE(ea_buf->xattr)"
before it is utilised.
Reported-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+4e6e7e4279d046613bc5@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=4e6e7e4279d046613bc5
Fixes: d9f9d96136cb ("jfs: xattr: check invalid xattr size more strictly")
Cc: stable@vger.kernel.org
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
switching
commit 7f81f27b1093e4895e87b74143c59c055c3b1906 upstream.
Kairui reported a UAF issue in print_graph_function_flags() during
ftrace stress testing [1]. This issue can be reproduced if puting a
'mdelay(10)' after 'mutex_unlock(&trace_types_lock)' in s_start(),
and executing the following script:
$ echo function_graph > current_tracer
$ cat trace > /dev/null &
$ sleep 5 # Ensure the 'cat' reaches the 'mdelay(10)' point
$ echo timerlat > current_tracer
The root cause lies in the two calls to print_graph_function_flags
within print_trace_line during each s_show():
* One through 'iter->trace->print_line()';
* Another through 'event->funcs->trace()', which is hidden in
print_trace_fmt() before print_trace_line returns.
Tracer switching only updates the former, while the latter continues
to use the print_line function of the old tracer, which in the script
above is print_graph_function_flags.
Moreover, when switching from the 'function_graph' tracer to the
'timerlat' tracer, s_start only calls graph_trace_close of the
'function_graph' tracer to free 'iter->private', but does not set
it to NULL. This provides an opportunity for 'event->funcs->trace()'
to use an invalid 'iter->private'.
To fix this issue, set 'iter->private' to NULL immediately after
freeing it in graph_trace_close(), ensuring that an invalid pointer
is not passed to other tracers. Additionally, clean up the unnecessary
'iter->private = NULL' during each 'cat trace' when using wakeup and
irqsoff tracers.
[1] https://lore.kernel.org/all/20231112150030.84609-1-ryncsn@gmail.com/
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Zheng Yejian <zhengyejian1@huawei.com>
Link: https://lore.kernel.org/20250320122137.23635-1-wutengda@huaweicloud.com
Fixes: eecb91b9f98d ("tracing: Fix memleak due to race between current_tracer and trace")
Closes: https://lore.kernel.org/all/CAMgjq7BW79KDSCyp+tZHjShSzHsScSiJxn5ffskp-QzVM06fxw@mail.gmail.com/
Reported-by: Kairui Song <kasong@tencent.com>
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit a41fcca4b342811b473bbaa4b44f1d34d87fcce6 upstream.
Set the MMC_CAP_NEED_RSP_BUSY capability for the sdhci-pxav3 host to
prevent conversion of R1B responses to R1. Without this, the eMMC card
in the samsung,coreprimevelte smartphone using the Marvell PXA1908 SoC
with this mmc host doesn't probe with the ETIMEDOUT error originating in
__mmc_poll_for_busy.
Note that the other issues reported for this phone and host, namely
floods of "Tuning failed, falling back to fixed sampling clock" dmesg
messages for the eMMC and unstable SDIO are not mitigated by this
change.
Link: https://lore.kernel.org/r/20200310153340.5593-1-ulf.hansson@linaro.org/
Link: https://lore.kernel.org/r/D7204PWIGQGI.1FRFQPPIEE2P9@matfyz.cz/
Link: https://lore.kernel.org/r/20250115-pxa1908-lkml-v14-0-847d24f3665a@skole.hr/
Cc: stable@vger.kernel.org
Signed-off-by: Karel Balej <balejk@matfyz.cz>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Duje Mihanović <duje.mihanovic@skole.hr>
Link: https://lore.kernel.org/r/20250310140707.23459-1-balejk@matfyz.cz
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 2da31ea2a085cd189857f2db0f7b78d0162db87a upstream.
Like the ASUS Vivobook X1504VAP and Vivobook X1704VAP, the ASUS Vivobook 14
X1404VAP has its keyboard IRQ (1) described as ActiveLow in the DSDT, which
the kernel overrides to EdgeHigh breaking the keyboard.
$ sudo dmidecode
[…]
System Information
Manufacturer: ASUSTeK COMPUTER INC.
Product Name: ASUS Vivobook 14 X1404VAP_X1404VA
[…]
$ grep -A 30 PS2K dsdt.dsl | grep IRQ -A 1
IRQ (Level, ActiveLow, Exclusive, )
{1}
Add the X1404VAP to the irq1_level_low_skip_override[] quirk table to fix
this.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219224
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Anton Shyndin <mrcold.il@gmail.com>
Link: https://patch.msgid.link/20250318160903.77107-1-pmenzel@molgen.mpg.de
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 3ef938c3503563bfc2ac15083557f880d29c2e64 upstream.
On the following path, flush_tlb_range() can be used for zapping normal
PMD entries (PMD entries that point to page tables) together with the PTE
entries in the pointed-to page table:
collapse_pte_mapped_thp
pmdp_collapse_flush
flush_tlb_range
The arm64 version of flush_tlb_range() has a comment describing that it can
be used for page table removal, and does not use any last-level
invalidation optimizations. Fix the X86 version by making it behave the
same way.
Currently, X86 only uses this information for the following two purposes,
which I think means the issue doesn't have much impact:
- In native_flush_tlb_multi() for checking if lazy TLB CPUs need to be
IPI'd to avoid issues with speculative page table walks.
- In Hyper-V TLB paravirtualization, again for lazy TLB stuff.
The patch "x86/mm: only invalidate final translations with INVLPGB" which
is currently under review (see
<https://lore.kernel.org/all/20241230175550.4046587-13-riel@surriel.com/>)
would probably be making the impact of this a lot worse.
Fixes: 016c4d92cd16 ("x86/mm/tlb: Add freed_tables argument to flush_tlb_mm_range")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20250103-x86-collapse-flush-fix-v1-1-3c521856cfa6@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit d90c9de9de2f1712df56de6e4f7d6982d358cabe upstream.
TSC could be reset in deep ACPI sleep states, even with invariant TSC.
That's the reason we have sched_clock() save/restore functions, to deal
with this situation. But what happens is that such functions are guarded
with a check for the stability of sched_clock - if not considered stable,
the save/restore routines aren't executed.
On top of that, we have a clear comment in native_sched_clock() saying
that *even* with TSC unstable, we continue using TSC for sched_clock due
to its speed.
In other words, if we have a situation of TSC getting detected as unstable,
it marks the sched_clock as unstable as well, so subsequent S3 sleep cycles
could bring bogus sched_clock values due to the lack of the save/restore
mechanism, causing warnings like this:
[22.954918] ------------[ cut here ]------------
[22.954923] Delta way too big! 18446743750843854390 ts=18446744072977390405 before=322133536015 after=322133536015 write stamp=18446744072977390405
[22.954923] If you just came from a suspend/resume,
[22.954923] please switch to the trace global clock:
[22.954923] echo global > /sys/kernel/tracing/trace_clock
[22.954923] or add trace_clock=global to the kernel command line
[22.954937] WARNING: CPU: 2 PID: 5728 at kernel/trace/ring_buffer.c:2890 rb_add_timestamp+0x193/0x1c0
Notice that the above was reproduced even with "trace_clock=global".
The fix for that is to _always_ save/restore the sched_clock on suspend
cycle _if TSC is used_ as sched_clock - only if we fallback to jiffies
the sched_clock_stable() check becomes relevant to save/restore the
sched_clock.
Debugged-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250215210314.351480-1-gpiccoli@igalia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
commit 4279e72cab31dd3eb8c89591eb9d2affa90ab6aa upstream.
The function call “dmaengine_unmap_put(unmap)” was used in an if branch.
The same call was immediately triggered by a subsequent goto statement.
Thus avoid such a call repetition.
This issue was detected by using the Coccinelle software.
Fixes: 5648e56d03fa ("NTB: ntb_perf: Add full multi-port NTB API support")
Cc: stable@vger.kernel.org
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[ Upstream commit fd99d6ed20234b83d65b9c5417794343577cf3e5 ]
After a suspend/resume cycle on a down interface, it will come up as
ERROR-ACTIVE.
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state STOPPED (berr-counter tx 0 rx 0) restart-ms 1000
$ sudo systemctl suspend
$ ip -details -s -s a s dev flexcan0
3: flexcan0: <NOARP,ECHO> mtu 16 qdisc pfifo_fast state DOWN group default qlen 10
link/can promiscuity 0 allmulti 0 minmtu 0 maxmtu 0
can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 1000
And only set CAN state to CAN_STATE_ERROR_ACTIVE when resume process
has no issue, otherwise keep in CAN_STATE_SLEEPING as suspend did.
Fixes: 4de349e786a3 ("can: flexcan: fix resume function")
Cc: stable@vger.kernel.org
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20250314110145.899179-1-haibo.chen@nxp.com
Reported-by: Marc Kleine-Budde <mkl@pengutronix.de>
Closes: https://lore.kernel.org/all/20250314-married-polar-elephant-b15594-mkl@pengutronix.de
[mkl: add newlines]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fda8c491db2a90ff3e6fbbae58e495b4ddddeca3 ]
devm_kasprintf() returns NULL when memory allocation fails. Currently,
com20020pci_probe() does not check for this case, which results in a
NULL pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue and ensure
no resources are left allocated.
Fixes: 6b17a597fc2f ("arcnet: restoring support for multiple Sohard Arcnet cards")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Link: https://patch.msgid.link/20250402135036.44697-1-bsdhenrymartin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a58d882841a0750da3c482cd3d82432b1c7edb77 ]
The mv88e6xxx has an internal PPU that polls PHY state. If we want to
access the internal PHYs, we need to disable the PPU first. Because
that is a slow operation, a 10ms timer is used to re-enable it,
canceled with every access, so bulk operations effectively only
disable it once and re-enable it some 10ms after the last access.
If a PHY is accessed and then the mv88e6xxx module is removed before
the 10ms are up, the PPU re-enable ends up accessing a dangling pointer.
This especially affects probing during bootup. The MDIO bus and PHY
registration may succeed, but registration with the DSA framework
may fail later on (e.g. because the CPU port depends on another,
very slow device that isn't done probing yet, returning -EPROBE_DEFER).
In this case, probe() fails, but the MDIO subsystem may already have
accessed the MIDO bus or PHYs, arming the timer.
This is fixed as follows:
- If probe fails after mv88e6xxx_phy_init(), make sure we also call
mv88e6xxx_phy_destroy() before returning
- In mv88e6xxx_remove(), make sure we do the teardown in the correct
order, calling mv88e6xxx_phy_destroy() after unregistering the
switch device.
- In mv88e6xxx_phy_destroy(), destroy both the timer and the work item
that the timer might schedule, synchronously waiting in case one of
the callbacks already fired and destroying the timer first, before
waiting for the work item.
- Access to the PPU is guarded by a mutex, the worker acquires it
with a mutex_trylock(), not proceeding with the expensive shutdown
if that fails. We grab the mutex in mv88e6xxx_phy_destroy() to make
sure the slow PPU shutdown is already done or won't even enter, when
we wait for the work item.
Fixes: 2e5f032095ff ("dsa: add support for the Marvell 88E6131 switch chip")
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Link: https://patch.msgid.link/20250401135705.92760-1-david.oberhollenzer@sigma-star.at
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7ac6ea4a3e0898db76aecccd68fb2c403eb7d24e ]
Using RTEXT_FILTER_SKIP_STATS is incorrectly skipping non-stats IPv6
netlink attributes on link dump. This causes issues on userspace tools,
e.g iproute2 is not rendering address generation mode as it should due
to missing netlink attribute.
Move the filling of IFLA_INET6_STATS and IFLA_INET6_ICMP6STATS to a
helper function guarded by a flag check to avoid hitting the same
situation in the future.
Fixes: d5566fd72ec1 ("rtnetlink: RTEXT_FILTER_SKIP_STATS support to avoid dumping inet/inet6 stats")
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250402121751.3108-1-ffmancera@riseup.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit fccd2b711d9628c7ce0111d5e4938652101ee30a ]
When a peer attempts to establish a connection, vsock_connect() contains
a loop that waits for the state to be TCP_ESTABLISHED. However, the
other peer can be fast enough to accept the connection and close it
immediately, thus moving the state to TCP_CLOSING.
When this happens, the peer in the vsock_connect() is properly woken up,
but since the state is not TCP_ESTABLISHED, it goes back to sleep
until the timeout expires, returning -ETIMEDOUT.
If the socket state is TCP_CLOSING, waiting for the timeout is pointless.
vsock_connect() can return immediately without errors or delay since the
connection actually happened. The socket will be in a closing state,
but this is not an issue, and subsequent calls will fail as expected.
We discovered this issue while developing a test that accepts and
immediately closes connections to stress the transport switch between
two connect() calls, where the first one was interrupted by a signal
(see Closes link).
Reported-by: Luigi Leonardi <leonardi@redhat.com>
Closes: https://lore.kernel.org/virtualization/bq6hxrolno2vmtqwcvb5bljfpb7mvwb3kohrvaed6auz5vxrfv@ijmd2f3grobn/
Fixes: d021c344051a ("VSOCK: Introduce VM Sockets")
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Tested-by: Luigi Leonardi <leonardi@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Link: https://patch.msgid.link/20250328141528.420719-1-sgarzare@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce8fe975fd99b49c29c42e50f2441ba53112b2e8 ]
In the current implementation, skbprio enqueue/dequeue contains an assertion
that fails under certain conditions when SKBPRIO is used as a child qdisc under
TBF with specific parameters. The failure occurs because TBF sometimes peeks at
packets in the child qdisc without actually dequeuing them when tokens are
unavailable.
This peek operation creates a discrepancy between the parent and child qdisc
queue length counters. When TBF later receives a high-priority packet,
SKBPRIO's queue length may show a different value than what's reflected in its
internal priority queue tracking, triggering the assertion.
The fix removes this overly strict assertions in SKBPRIO, they are not
necessary at all.
Reported-by: syzbot+a3422a19b05ea96bee18@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=a3422a19b05ea96bee18
Fixes: aea5f654e6b7 ("net/sched: add skbprio scheduler")
Cc: Nishanth Devarajan <ndev2021@gmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://patch.msgid.link/20250329222536.696204-2-xiyou.wangcong@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 078aabd567de3d63d37d7673f714e309d369e6e2 ]
When calling netlbl_conn_setattr(), addr->sa_family is used
to determine the function behavior. If sk is an IPv4 socket,
but the connect function is called with an IPv6 address,
the function calipso_sock_setattr() is triggered.
Inside this function, the following code is executed:
sk_fullsock(__sk) ? inet_sk(__sk)->pinet6 : NULL;
Since sk is an IPv4 socket, pinet6 is NULL, leading to a
null pointer dereference.
This patch fixes the issue by checking if inet6_sk(sk)
returns a NULL pointer before accessing pinet6.
Signed-off-by: Debin Zhu <mowenroot@163.com>
Signed-off-by: Bitao Ouyang <1985755126@qq.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Fixes: ceba1832b1b2 ("calipso: Set the calipso socket label to match the secattr.")
Link: https://patch.msgid.link/20250401124018.4763-1-mowenroot@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8144e9c8f30fb23bb736a5d24d5c9d46965563c4 ]
Make sure we are not using DB's which were remapped for link status.
Fixes: f6e51c354b60 ("ntb: intel: split out the gen3 code")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit de203da734fae00e75be50220ba5391e7beecdf9 ]
There is a kernel API ntb_mw_clear_trans() would pass 0 to both addr and
size. This would make xlate_pos negative.
[ 23.734156] switchtec switchtec0: MW 0: part 0 addr 0x0000000000000000 size 0x0000000000000000
[ 23.734158] ================================================================================
[ 23.734172] UBSAN: shift-out-of-bounds in drivers/ntb/hw/mscc/ntb_hw_switchtec.c:293:7
[ 23.734418] shift exponent -1 is negative
Ensuring xlate_pos is a positive or zero before BIT.
Fixes: 1e2fd202f859 ("ntb_hw_switchtec: Check for alignment of the buffer in mw_set_trans()")
Signed-off-by: Yajun Deng <yajun.deng@linux.dev>
Reviewed-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0f5cce3fc55b08ee4da3372baccf4bcd36a98396 ]
Leak fixes back in 2008 missed one case - if we are trying to set affinity
and spufs_mkdir() fails, we need to drop the reference to neighbor.
Fixes: 58119068cb27 "[POWERPC] spufs: Fix memory leak on SPU affinity"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d1ca8698ca1332625d83ea0d753747be66f9906d ]
It's called from spufs_fill_dir(), and caller of that will do
spufs_rmdir() in case of failure. That does remove everything
we'd managed to create, but... the problem dentry is still
negative. IOW, it needs to be explicitly dropped.
Fixes: 3f51dd91c807 "[PATCH] spufs: fix spufs_fill_dir error path"
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 815f80ad20b63830949a77c816e35395d5d55144 ]
pwm_num is set to 7 for these chips, but NCT6776_REG_PWM_MODE and
NCT6776_PWM_MODE_MASK only contain 6 values.
Fix this by adding another 0 to the end of each array.
Signed-off-by: Tasos Sahanidis <tasos@tasossah.com>
Link: https://lore.kernel.org/r/20250312030832.106475-1-tasos@tasossah.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 80b5f90158d1364cbd80ad82852a757fc0692bf2 ]
In can_send() and can_receive() CAN messages and CAN filter matches are
counted to be visible in the CAN procfs files.
KCSAN detected a data race within can_send() when two CAN frames have
been generated by a timer event writing to the same CAN netdevice at the
same time. Use atomic operations to access the statistics in the hot path
to fix the KCSAN complaint.
Reported-by: syzbot+78ce4489b812515d5e4d@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/67cd717d.050a0220.e1a89.0006.GAE@google.com
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Reviewed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://patch.msgid.link/20250310143353.3242-1-socketcan@hartkopp.net
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 85b2b9c16d053364e2004883140538e73b333cdb ]
A circular lock dependency splat has been seen involving down_trylock():
======================================================
WARNING: possible circular locking dependency detected
6.12.0-41.el10.s390x+debug
------------------------------------------------------
dd/32479 is trying to acquire lock:
0015a20accd0d4f8 ((console_sem).lock){-.-.}-{2:2}, at: down_trylock+0x26/0x90
but task is already holding lock:
000000017e461698 (&zone->lock){-.-.}-{2:2}, at: rmqueue_bulk+0xac/0x8f0
the existing dependency chain (in reverse order) is:
-> #4 (&zone->lock){-.-.}-{2:2}:
-> #3 (hrtimer_bases.lock){-.-.}-{2:2}:
-> #2 (&rq->__lock){-.-.}-{2:2}:
-> #1 (&p->pi_lock){-.-.}-{2:2}:
-> #0 ((console_sem).lock){-.-.}-{2:2}:
The console_sem -> pi_lock dependency is due to calling try_to_wake_up()
while holding the console_sem raw_spinlock. This dependency can be broken
by using wake_q to do the wakeup instead of calling try_to_wake_up()
under the console_sem lock. This will also make the semaphore's
raw_spinlock become a terminal lock without taking any further locks
underneath it.
The hrtimer_bases.lock is a raw_spinlock while zone->lock is a
spinlock. The hrtimer_bases.lock -> zone->lock dependency happens via
the debug_objects_fill_pool() helper function in the debugobjects code.
-> #4 (&zone->lock){-.-.}-{2:2}:
__lock_acquire+0xe86/0x1cc0
lock_acquire.part.0+0x258/0x630
lock_acquire+0xb8/0xe0
_raw_spin_lock_irqsave+0xb4/0x120
rmqueue_bulk+0xac/0x8f0
__rmqueue_pcplist+0x580/0x830
rmqueue_pcplist+0xfc/0x470
rmqueue.isra.0+0xdec/0x11b0
get_page_from_freelist+0x2ee/0xeb0
__alloc_pages_noprof+0x2c2/0x520
alloc_pages_mpol_noprof+0x1fc/0x4d0
alloc_pages_noprof+0x8c/0xe0
allocate_slab+0x320/0x460
___slab_alloc+0xa58/0x12b0
__slab_alloc.isra.0+0x42/0x60
kmem_cache_alloc_noprof+0x304/0x350
fill_pool+0xf6/0x450
debug_object_activate+0xfe/0x360
enqueue_hrtimer+0x34/0x190
__run_hrtimer+0x3c8/0x4c0
__hrtimer_run_queues+0x1b2/0x260
hrtimer_interrupt+0x316/0x760
do_IRQ+0x9a/0xe0
do_irq_async+0xf6/0x160
Normally a raw_spinlock to spinlock dependency is not legitimate
and will be warned if CONFIG_PROVE_RAW_LOCK_NESTING is enabled,
but debug_objects_fill_pool() is an exception as it explicitly
allows this dependency for non-PREEMPT_RT kernel without causing
PROVE_RAW_LOCK_NESTING lockdep splat. As a result, this dependency is
legitimate and not a bug.
Anyway, semaphore is the only locking primitive left that is still
using try_to_wake_up() to do wakeup inside critical section, all the
other locking primitives had been migrated to use wake_q to do wakeup
outside of the critical section. It is also possible that there are
other circular locking dependencies involving printk/console_sem or
other existing/new semaphores lurking somewhere which may show up in
the future. Let just do the migration now to wake_q to avoid headache
like this.
Reported-by: yzbot+ed801a886dfdbfe7136d@syzkaller.appspotmail.com
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20250307232717.1759087-3-boqun.feng@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 14672f059d83f591afb2ee1fff56858efe055e5a ]
The ftrace selftest reported a failure because writing -1 to
sched_rt_runtime_us returns -EBUSY. This happens when the possible
CPUs are different from active CPUs.
Active CPUs are part of one root domain, while remaining CPUs are part
of def_root_domain. Since active cpumask is being used, this results in
cpus=0 when a non active CPUs is used in the loop.
Fix it by looping over the online CPUs instead for validating the
bandwidth calculations.
Signed-off-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juri Lelli <juri.lelli@redhat.com>
Link: https://lore.kernel.org/r/20250306052954.452005-2-sshegde@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 011ea742a25a77bac3d995f457886a67d178c6f0 ]
If a data sector on an OFS floppy contains a value > 0x1e8 (the
largest amount of data that fits in the sector after its header), then
an Amiga reading the file can return corrupt data, by taking the
overlarge size at its word and reading past the end of the buffer it
read the disk sector into!
The cause: when affs_write_end_ofs() writes data to an OFS filesystem,
the new size field for a data block was computed by adding the amount
of data currently being written (into the block) to the existing value
of the size field. This is correct if you're extending the file at the
end, but if you seek backwards in the file and overwrite _existing_
data, it can lead to the size field being larger than the maximum
legal value.
This commit changes the calculation so that it sets the size field to
the max of its previous size and the position within the block that we
just wrote up to.
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e4cf8ec4de4e13f156c1d61977d282d90c221085 ]
If I write a file to an OFS floppy image, and try to read it back on
an emulated Amiga running Workbench 1.3, the Amiga reports a disk
error trying to read the file. (That is, it's unable to read it _at
all_, even to copy it to the NIL: device. It isn't a matter of getting
the wrong data and being unable to parse the file format.)
This is because the 'sequence number' field in the OFS data block
header is supposed to be based at 1, but affs writes it based at 0.
All three locations changed by this patch were setting the sequence
number to a variable 'bidx' which was previously obtained by dividing
a file position by bsize, so bidx will naturally use 0 for the first
block. Therefore all three should add 1 to that value before writing
it into the sequence number field.
With this change, the Amiga successfully reads the file.
For data block reference: https://wiki.osdev.org/FFS_(Amiga)
Signed-off-by: Simon Tatham <anakin@pobox.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7774e3920029398ad49dc848b23840593f14d515 ]
The firmware dumps can be pretty big, and since we use single
pages for each SG table entry, even the table itself may end
up being an order-5 allocation. Build chained tables so that
we need not allocate a higher-order table here.
This could be improved and cleaned up, e.g. by using the SG
pool code or simply kvmalloc(), but all of that would require
also updating the devcoredump first since that frees it all,
so we need to be more careful. SG pool might also run against
the CONFIG_ARCH_NO_SG_CHAIN limitation, which is irrelevant
here.
Also use _devcd_free_sgtable() for the error paths now, much
simpler especially since it's in two places now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250209143303.697c7a465ac9.Iea982df46b5c075bfb77ade36f187d99a70c63db@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 09f37f2d7b21ff35b8b533f9ab8cfad2fe8f72f6 ]
sched_smt_active() can be called from noinstr code, so it should always
be inlined. The CONFIG_SCHED_SMT version already has __always_inline.
Do the same for its !CONFIG_SCHED_SMT counterpart.
Fixes the following warning:
vmlinux.o: error: objtool: intel_idle_ibrs+0x13: call to sched_smt_active() leaves .noinstr.text section
Fixes: 321a874a7ef8 ("sched/smt: Expose sched_smt_present static key")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/1d03907b0a247cf7fb5c1d518de378864f603060.1743481539.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503311434.lyw2Tveh-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0fdba88a211508984eb5df62008c29688692b134 ]
When number of RVU VFs > 64, the vfs value passed to "rvu_queue_work"
function is incorrect. Due to which mbox workqueue entries for
VFs 0 to 63 never gets added to workqueue.
Fixes: 9bdc47a6e328 ("octeontx2-af: Mbox communication support btw AF and it's VFs")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250327091441.1284-1-gakula@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c73f0b69648501978e8b3e8fa7eef7f4197d0481 ]
The calculation of bytes-dropped and bytes_dropped_nested is reversed.
Although it does not affect the final calculation of total_dropped,
it should still be modified.
Link: https://lore.kernel.org/20250223070106.6781-1-yangfeng59949@163.com
Fixes: 6c43e554a2a5 ("ring-buffer: Add ring buffer startup selftest")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e63d465f59011dede0a0f1d21718b59a64c3ff5c ]
If dib8000_set_dds()'s call to dib8000_read32() returns zero, the result
is a divide-by-zero. Prevent that from happening.
Fixes the following warning with an UBSAN kernel:
drivers/media/dvb-frontends/dib8000.o: warning: objtool: dib8000_tune() falls through to next function dib8096p_cfg_DibRx()
Fixes: 173a64cb3fcf ("[media] dib8000: enhancement")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/bd1d504d930ae3f073b1e071bcf62cae7708773c.1742852847.git.jpoimboe@kernel.org
Closes: https://lore.kernel.org/r/202503210602.fvH5DO1i-lkp@intel.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6287fbad1cd91f0c25cdc3a580499060828a8f30 ]
proc_pid_wchan() used to report kernel addresses to user space but that is
no longer the case today. Bring the comment above proc_pid_wchan() in
sync with the implementation.
Link: https://lkml.kernel.org/r/20250319210222.1518771-1-bvanassche@acm.org
Fixes: b2f73922d119 ("fs/proc, core/debug: Don't expose absolute kernel addresses via wchan")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Cc: Kees Cook <kees@kernel.org>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89aaeaf84231157288035b366cb6300c1c6cac64 ]
The pyrf_event__new() method copies the event obtained from the perf
ring buffer to a structure that will then be turned into a python object
for further consumption, so it copies perf_event.header.size bytes to
its 'event' member:
$ pahole -C pyrf_event /tmp/build/perf-tools-next/python/perf.cpython-312-x86_64-linux-gnu.so
struct pyrf_event {
PyObject ob_base; /* 0 16 */
struct evsel * evsel; /* 16 8 */
struct perf_sample sample; /* 24 312 */
/* XXX last struct has 7 bytes of padding, 2 holes */
/* --- cacheline 5 boundary (320 bytes) was 16 bytes ago --- */
union perf_event event; /* 336 4168 */
/* size: 4504, cachelines: 71, members: 4 */
/* member types with holes: 1, total: 2 */
/* paddings: 1, sum paddings: 7 */
/* last cacheline: 24 bytes */
};
$
It was doing so without checking if the event just obtained has more
than that space, fix it.
This isn't a proper, final solution, as we need to support larger
events, but for the time being we at least bounds check and document it.
Fixes: 877108e42b1b9ba6 ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-7-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 3de5a2bf5b4847f7a59a184568f969f8fe05d57f ]
To avoid a leak if we have the python object but then something happens
and we need to return the operation, decrement the offset of the newly
created object.
Fixes: 377f698db12150a1 ("perf python: Add struct evsel into struct pyrf_event")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-5-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1376c195e8ad327bb9f2d32e0acc5ac39e7cb30a ]
Some old cut'n'paste error, its "ip", so the description should be
"event ip", not "event type".
Fixes: 877108e42b1b9ba6 ("perf tools: Initial python binding")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/r/20250312203141.285263-2-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a406aff8c05115119127c962cbbbbd202e1973ef ]
The l_tree_depth field is 16-bit (__le16), but the actual maximum depth is
limited to OCFS2_MAX_PATH_DEPTH.
Add a check to prevent out-of-bounds access if l_tree_depth has an invalid
value, which may occur when reading from a corrupted mounted disk [1].
Link: https://lkml.kernel.org/r/20250214084908.736528-1-kovalev@altlinux.org
Fixes: ccd979bdbce9 ("[PATCH] OCFS2: The Second Oracle Cluster Filesystem")
Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org>
Reported-by: syzbot+66c146268dc88f4341fd@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=66c146268dc88f4341fd [1]
Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Changwei Ge <gechangwei@live.cn>
Cc: Jun Piao <piaojun@huawei.com>
Cc: Kurt Hackel <kurt.hackel@oracle.com>
Cc: Mark Fasheh <mark@fasheh.com>
Cc: Vasiliy Kovalev <kovalev@altlinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9986fb5164c8b21f6439cfd45ba36d8cc80c9710 ]
Patch series "powerpc/crash: use generic crashkernel reservation", v3.
Commit 0ab97169aa05 ("crash_core: add generic function to do reservation")
added a generic function to reserve crashkernel memory. So let's use the
same function on powerpc and remove the architecture-specific code that
essentially does the same thing.
The generic crashkernel reservation also provides a way to split the
crashkernel reservation into high and low memory reservations, which can
be enabled for powerpc in the future.
Additionally move powerpc to use generic APIs to locate memory hole for
kexec segments while loading kdump kernel.
This patch (of 7):
kexec_elf_load() loads an ELF executable and sets the address of the
lowest PT_LOAD section to the address held by the lowest_load_addr
function argument.
To determine the lowest PT_LOAD address, a local variable lowest_addr
(type unsigned long) is initialized to UINT_MAX. After loading each
PT_LOAD, its address is compared to lowest_addr. If a loaded PT_LOAD
address is lower, lowest_addr is updated. However, setting lowest_addr to
UINT_MAX won't work when the kernel image is loaded above 4G, as the
returned lowest PT_LOAD address would be invalid. This is resolved by
initializing lowest_addr to ULONG_MAX instead.
This issue was discovered while implementing crashkernel high/low
reservation on the PowerPC architecture.
Link: https://lkml.kernel.org/r/20250131113830.925179-1-sourabhjain@linux.ibm.com
Link: https://lkml.kernel.org/r/20250131113830.925179-2-sourabhjain@linux.ibm.com
Fixes: a0458284f062 ("powerpc: Add support code for kexec_file_load()")
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Acked-by: Hari Bathini <hbathini@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: Mahesh Salgaonkar <mahesh@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cf67629f7f637fb988228abdb3aae46d0c1748fe ]
No need to specify the array size, let the compiler figure that out.
This addresses this compiler warning that was noticed while build
testing on fedora rawhide:
31 15.81 fedora:rawhide : FAIL gcc version 15.0.1 20250225 (Red Hat 15.0.1-0) (GCC)
util/units.c: In function 'unit_number__scnprintf':
util/units.c:67:24: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
67 | char unit[4] = "BKMG";
| ^~~~~~
cc1: all warnings being treated as errors
Fixes: 9808143ba2e54818 ("perf tools: Add unit_number__scnprintf function")
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lore.kernel.org/r/20250310194534.265487-3-acme@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
ratio
[ Upstream commit df330c808182a8beab5d0f84a6cbc9cff76c61fc ]
If a match was not found, then the write_raw() callback would return
the odr index, not an error. Return -EINVAL if this occurs.
To avoid similar issues in future, introduce j, a new indexing variable
rather than using ret for this purpose.
Fixes: 79de2ee469aa ("iio: accel: mma8452: claim direct mode during write raw")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250217140135.896574-2-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0e14e062f5ff98aa15264dfa87c5f5e924028561 ]
Trying to record a trace on kernel with 64k pages resulted in -ENOMEM.
This happens due to a bug in calculating the number of table pages, which
returns zero. Fix the issue by rounding up.
$ perf record --kcore -e cs_etm/@tmc_etr55,cycacc,branch_broadcast/k --per-thread taskset --cpu-list 1 dd if=/dev/zero of=/dev/null
failed to mmap with 12 (Cannot allocate memory)
Fixes: 8ed536b1e283 ("coresight: catu: Add support for scatter gather tables")
Signed-off-by: Ilkka Koskinen <ilkka@os.amperecomputing.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250109215348.5483-1-ilkka@os.amperecomputing.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 81a82e8f33880793029cd6f8a766fb13b737e6a7 ]
In do_isofs_readdir() when assigning the variable
"struct iso_directory_record *de" the b_data field of the buffer_head
is accessed and an offset is added to it, the size of b_data is 2048
and the offset size is 2047, meaning
"de = (struct iso_directory_record *) (bh->b_data + offset);"
yields the final byte of the 2048 sized b_data block.
The first byte of the directory record (de_len) is then read and
found to be 31, meaning the directory record size is 31 bytes long.
The directory record is defined by the structure:
struct iso_directory_record {
__u8 length; // 1 byte
__u8 ext_attr_length; // 1 byte
__u8 extent[8]; // 8 bytes
__u8 size[8]; // 8 bytes
__u8 date[7]; // 7 bytes
__u8 flags; // 1 byte
__u8 file_unit_size; // 1 byte
__u8 interleave; // 1 byte
__u8 volume_sequence_number[4]; // 4 bytes
__u8 name_len; // 1 byte
char name[]; // variable size
} __attribute__((packed));
The fixed portion of this structure occupies 33 bytes. Therefore, a
valid directory record must be at least 33 bytes long
(even without considering the variable-length name field).
Since de_len is only 31, it is insufficient to contain
the complete fixed header.
The code later hits the following sanity check that
compares de_len against the sum of de->name_len and
sizeof(struct iso_directory_record):
if (de_len < de->name_len[0] + sizeof(struct iso_directory_record)) {
...
}
Since the fixed portion of the structure is
33 bytes (up to and including name_len member),
a valid record should have de_len of at least 33 bytes;
here, however, de_len is too short, and the field de->name_len
(located at offset 32) is accessed even though it lies beyond
the available 31 bytes.
This access on the corrupted isofs data triggers a KASAN uninitialized
memory warning. The fix would be to first verify that de_len is at least
sizeof(struct iso_directory_record) before accessing any
fields like de->name_len.
Reported-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com>
Tested-by: syzbot <syzbot+812641c6c3d7586a1613@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=812641c6c3d7586a1613
Fixes: 2deb1acc653c ("isofs: fix access to unallocated memory when reading corrupted filesystem")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://patch.msgid.link/20250211195900.42406-1-qasdev00@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
misplaced assignment
[ Upstream commit 2c118f50d7fd4d9aefc4533a26f83338b2906b7a ]
Commit:
2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
was intended to ensure alignment of the stack pointer; but it also moved
the initialization of the "stack" variable down into the loop header.
This was likely intended as a no-op cleanup, since the commit
message does not mention it; however, this caused a behavioral change
because the value of "regs" is different between the two places.
Originally, get_stack_pointer() used the regs provided by the caller; after
that commit, get_stack_pointer() instead uses the regs at the top of the
stack frame the unwinder is looking at. Often, there are no such regs at
all, and "regs" is NULL, causing get_stack_pointer() to fall back to the
task's current stack pointer, which is not what we want here, but probably
happens to mostly work. Other times, the original regs will point to
another regs frame - in that case, the linear guess unwind logic in
show_trace_log_lvl() will start unwinding too far up the stack, causing the
first frame found by the proper unwinder to never be visited, resulting in
a stack trace consisting purely of guess lines.
Fix it by moving the "stack = " assignment back where it belongs.
Fixes: 2e4be0d011f2 ("x86/show_trace_log_lvl: Ensure stack pointer is aligned, again")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-2-acd774364768@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2d8cb9ffe18c2f1e5bd07a19cbce85b26c1d0cf0 ]
If offset end up being high enough, right hand expression in functions
like sm501_gpio_set() shifted left for that number of bits, may
not fit in int type.
Just in case, fix that by using BIT() both as an option safe from
overflow issues and to make this step look similar to other gpio
drivers.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: f61be273d369 ("sm501: add gpiolib support")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://lore.kernel.org/r/20250115171206.20308-1-n.zhandarovich@fintech.ru
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 5ed3b0cb3f827072e93b4c5b6e2b8106fd7cccbd ]
When cur_qp isn't NULL, in order to avoid fetching the QP from
the radix tree again we check if the next cqe QP is identical to
the one we already have.
The bug however is that we are checking if the QP is identical by
checking the QP number inside the CQE against the QP number inside the
mlx5_ib_qp, but that's wrong since the QP number from the CQE is from
FW so it should be matched against mlx5_core_qp which is our FW QP
number.
Otherwise we could use the wrong QP when handling a CQE which could
cause the kernel trace below.
This issue is mainly noticeable over QPs 0 & 1, since for now they are
the only QPs in our driver whereas the QP number inside mlx5_ib_qp
doesn't match the QP number inside mlx5_core_qp.
BUG: kernel NULL pointer dereference, address: 0000000000000012
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP
CPU: 0 UID: 0 PID: 7927 Comm: kworker/u62:1 Not tainted 6.14.0-rc3+ #189
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
Workqueue: ib-comp-unb-wq ib_cq_poll_work [ib_core]
RIP: 0010:mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
Code: 03 00 00 8d 58 ff 21 cb 66 39 d3 74 39 48 c7 c7 3c 89 6e a0 0f b7 db e8 b7 d2 b3 e0 49 8b 86 60 03 00 00 48 c7 c7 4a 89 6e a0 <0f> b7 5c 98 02 e8 9f d2 b3 e0 41 0f b7 86 78 03 00 00 83 e8 01 21
RSP: 0018:ffff88810511bd60 EFLAGS: 00010046
RAX: 0000000000000010 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff88885fa1b3c0 RDI: ffffffffa06e894a
RBP: 00000000000000b0 R08: 0000000000000000 R09: ffff88810511bc10
R10: 0000000000000001 R11: 0000000000000001 R12: ffff88810d593000
R13: ffff88810e579108 R14: ffff888105146000 R15: 00000000000000b0
FS: 0000000000000000(0000) GS:ffff88885fa00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000012 CR3: 00000001077e6001 CR4: 0000000000370eb0
Call Trace:
<TASK>
? __die+0x20/0x60
? page_fault_oops+0x150/0x3e0
? exc_page_fault+0x74/0x130
? asm_exc_page_fault+0x22/0x30
? mlx5_ib_poll_cq+0x4c7/0xd90 [mlx5_ib]
__ib_process_cq+0x5a/0x150 [ib_core]
ib_cq_poll_work+0x31/0x90 [ib_core]
process_one_work+0x169/0x320
worker_thread+0x288/0x3a0
? work_busy+0xb0/0xb0
kthread+0xd7/0x1f0
? kthreads_online_cpu+0x130/0x130
? kthreads_online_cpu+0x130/0x130
ret_from_fork+0x2d/0x50
? kthreads_online_cpu+0x130/0x130
ret_from_fork_asm+0x11/0x20
</TASK>
Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Signed-off-by: Patrisious Haddad <phaddad@nvidia.com>
Reviewed-by: Edward Srouji <edwards@nvidia.com>
Link: https://patch.msgid.link/4ada09d41f1e36db62c44a9b25c209ea5f054316.1741875692.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 30cc7b0d0e9341d419eb7da15fb5c22406dbe499 ]
The charge input threshold voltage register on the MAX77693 PMIC accepts
four values: 0x0 for 4.3v, 0x1 for 4.7v, 0x2 for 4.8v and 0x3 for 4.9v.
Due to an oversight, the driver calculated the values for 4.7v and above
starting from 0x0, rather than from 0x1 ([(4700000 - 4700000) / 100000]
gives 0).
Add 1 to the calculation to ensure that 4.7v is converted to a register
value of 0x1 and that the other two voltages are converted correctly as
well.
Fixes: 87c2d9067893 ("power: max77693: Add charger driver for Maxim 77693")
Signed-off-by: Artur Weber <aweber.kernel@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250316-max77693-charger-input-threshold-fix-v1-1-2b037d0ac722@gmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 57e2428f8df8263275344566e02c277648a4b7f1 ]
PUSH_REGS with save_ret=1 is used by interrupt entry helper functions that
initially start with a UNWIND_HINT_FUNC ORC state.
However, save_ret=1 means that we clobber the helper function's return
address (and then later restore the return address further down on the
stack); after that point, the only thing on the stack we can unwind through
is the IRET frame, so use UNWIND_HINT_IRET_REGS until we have a full
pt_regs frame.
( An alternate approach would be to move the pt_regs->di overwrite down
such that it is the final step of pt_regs setup; but I don't want to
rearrange entry code just to make unwinding a tiny bit more elegant. )
Fixes: 9e809d15d6b6 ("x86/entry: Reduce the code footprint of the 'idtentry' macro")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20250325-2025-03-unwind-fixes-v1-1-acd774364768@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0079e77c08de692cb20b38e408365c830a44b1ef ]
The bit index of the peripheral clock for mmc A is wrong
This was probably not a problem for mmc A as the peripheral is likely left
enabled by the bootloader.
No issues has been reported so far but it could be a problem, most likely
some form of conflict between the ethernet and mmc A clock, breaking
ethernet on init.
Use the value provided by the documentation for mmc A before this
becomes an actual problem.
Fixes: 085a4ea93d54 ("clk: meson: g12a: add peripheral clock controller")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-mmca-fix-v1-1-5af421f58b64@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7915d7d5407c026fa9343befb4d3343f7a345f97 ]
The 32k clock reference a parent 'cts_slow_oscin' with a fixme note saying
that this clock should be provided by AO controller.
The HW probably has this clock but it does not exist at the moment in
any controller implementation. Furthermore, referencing clock by the global
name should be avoided whenever possible.
There is no reason to keep this hack around, at least for now.
Fixes: 14c735c8e308 ("clk: meson-gxbb: Add EE 32K Clock for CEC")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241220-amlogic-clk-gxbb-32k-fixes-v1-2-baca56ecf2db@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8995f8f108c3ac5ad52b12a6cfbbc7b3b32e9a58 ]
Several clocks used by both g12a and g12b use the g12a cpu A clock hw
pointer as clock parent. This is incorrect on g12b since the parents of
cluster A cpu clock are different. Also the hw clock provided as parent to
these children is not even registered clock on g12b.
Fix the problem by reverting to the global namespace and let CCF pick
the appropriate, as it is already done for other clocks, such as
cpu_clk_trace_div.
Fixes: 25e682a02d91 ("clk: meson: g12a: migrate to the new parent description method")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20241213-amlogic-clk-g12a-cpua-parent-fix-v1-1-d8c0f41865fe@baylibre.com
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 37826f0a8c2f6b6add5179003b8597e32a445362 ]
The ib_post_receive_mads() function handles posting receive work
requests (WRs) to MAD QPs and is called in two cases:
1) When a MAD port is opened.
2) When a receive WQE is consumed upon receiving a new MAD.
Whereas, if MADs arrive during the port open phase, a race condition
might cause an extra WR to be posted, exceeding the QP’s capacity.
This leads to failures such as:
infiniband mlx5_0: ib_post_recv failed: -12
infiniband mlx5_0: Couldn't post receive WRs
infiniband mlx5_0: Couldn't start port
infiniband mlx5_0: Couldn't open port 1
Fix this by checking the current receive count before posting a new WR.
If the QP’s receive queue is full, do not post additional WRs.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Maher Sanalla <msanalla@nvidia.com>
Link: https://patch.msgid.link/c4984ba3c3a98a5711a558bccefcad789587ecf1.1741875592.git.leon@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
