summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-02-23Linux 5.4.269v5.4.269Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20240221125940.058369148@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: kernelci.org bot <bot@kernelci.org> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23of: gpio unittest kfree() wrong objectFrank Rowand1-1/+1
commit fb227f597d612c6660888d1947e68a25fed7b9cc upstream. kernel test robot reported "WARNING: held lock freed!" triggered by unittest_gpio_remove(). unittest_gpio_remove() was unexpectedly called due to an error in overlay tracking. The remove had not been tested because the gpio overlay removal tests have not been implemented. kfree() gdev instead of pdev. Fixes: f4056e705b2e ("of: unittest: add overlay gpio test to catch gpio hog problem") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Frank Rowand <frank.rowand@sony.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23of: unittest: fix EXPECT text for gpio hog errorsFrank Rowand1-8/+8
commit e85860e5bc077865a04f0a88d0b0335d3200484a upstream. The console message text for gpio hog errors does not match what unittest expects. Fixes: f4056e705b2ef ("of: unittest: add overlay gpio test to catch gpio hog problem") Signed-off-by: Frank Rowand <frank.rowand@sony.com> Link: https://lore.kernel.org/r/20211029013225.2048695-1-frowand.list@gmail.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23net: bcmgenet: Fix EEE implementationFlorian Fainelli3-14/+17
commit a9f31047baca57d47440c879cf259b86f900260c upstream. We had a number of short comings: - EEE must be re-evaluated whenever the state machine detects a link change as wight be switching from a link partner with EEE enabled/disabled - tx_lpi_enabled controls whether EEE should be enabled/disabled for the transmit path, which applies to the TBUF block - We do not need to forcibly enable EEE upon system resume, as the PHY state machine will trigger a link event that will do that, too Fixes: 6ef398ea60d9 ("net: bcmgenet: add EEE support") Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20230606214348.2408018-1-florian.fainelli@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23Revert "Revert "mtd: rawnand: gpmi: Fix setting busy timeout setting""Max Krummenacher1-1/+1
This reverts commit 15a3adfe75937c9e4e0e48f0ed40dd39a0e526e2. The backport of [1] relies on having [2] also backported. Having only one of the two results in a bogus hw->timing1 setting. If only [2] is backportet the 16 bit register value likely underflows resulting in a busy_wait_timeout of 0. Or if only [1] is applied the value likely overflows with chances of having last 16 LSBs all 0 which would then result in a busy_wait_timeout of 0 too. Both cases may lead to NAND data corruption, e.g. on a Colibri iMX7 setup this has been seen. [1] commit 0fddf9ad06fd ("mtd: rawnand: gpmi: Set WAIT_FOR_READY timeout based on program/erase times") [2] commit 06781a5026350 ("mtd: rawnand: gpmi: Fix setting busy timeout setting") Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23netfilter: nf_tables: fix pointer math issue in nft_byteorder_eval()Dan Carpenter3-5/+6
commit c301f0981fdd3fd1ffac6836b423c4d7a8e0eb63 upstream. The problem is in nft_byteorder_eval() where we are iterating through a loop and writing to dst[0], dst[1], dst[2] and so on... On each iteration we are writing 8 bytes. But dst[] is an array of u32 so each element only has space for 4 bytes. That means that every iteration overwrites part of the previous element. I spotted this bug while reviewing commit caf3ef7468f7 ("netfilter: nf_tables: prevent OOB access in nft_byteorder_eval") which is a related issue. I think that the reason we have not detected this bug in testing is that most of time we only write one element. Fixes: ce1e7989d989 ("netfilter: nft_byteorder: provide 64bit le/be conversion") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> [Ajay: Modified to apply on v5.4.y] Signed-off-by: Ajay Kaher <ajay.kaher@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23lsm: new security_file_ioctl_compat() hookAlfred Piccioni7-2/+66
commit f1bb47a31dff6d4b34fb14e99850860ee74bb003 upstream. Some ioctl commands do not require ioctl permission, but are routed to other permissions such as FILE_GETATTR or FILE_SETATTR. This routing is done by comparing the ioctl cmd to a set of 64-bit flags (FS_IOC_*). However, if a 32-bit process is running on a 64-bit kernel, it emits 32-bit flags (FS_IOC32_*) for certain ioctl operations. These flags are being checked erroneously, which leads to these ioctl operations being routed to the ioctl permission, rather than the correct file permissions. This was also noted in a RED-PEN finding from a while back - "/* RED-PEN how should LSM module know it's handling 32bit? */". This patch introduces a new hook, security_file_ioctl_compat(), that is called from the compat ioctl syscall. All current LSMs have been changed to support this hook. Reviewing the three places where we are currently using security_file_ioctl(), it appears that only SELinux needs a dedicated compat change; TOMOYO and SMACK appear to be functional without any change. Cc: stable@vger.kernel.org Fixes: 0b24dcb7f2f7 ("Revert "selinux: simplify ioctl checking"") Signed-off-by: Alfred Piccioni <alpic@google.com> Reviewed-by: Stephen Smalley <stephen.smalley.work@gmail.com> [PM: subject tweak, line length fixes, and alignment corrections] Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23drm/msm/dsi: Enable runtime PMKonrad Dybcio1-0/+4
[ Upstream commit 6ab502bc1cf3147ea1d8540d04b83a7a4cb6d1f1 ] Some devices power the DSI PHY/PLL through a power rail that we model as a GENPD. Enable runtime PM to make it suspendable. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/543352/ Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-2-a11a751f34f0@linaro.org Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23PM: runtime: Have devm_pm_runtime_enable() handle ↵Douglas Anderson2-0/+10
pm_runtime_dont_use_autosuspend() [ Upstream commit b4060db9251f919506e4d672737c6b8ab9a84701 ] The PM Runtime docs say: Drivers in ->remove() callback should undo the runtime PM changes done in ->probe(). Usually this means calling pm_runtime_disable(), pm_runtime_dont_use_autosuspend() etc. >From grepping code, it's clear that many people aren't aware of the need to call pm_runtime_dont_use_autosuspend(). When brainstorming solutions, one idea that came up was to leverage the new-ish devm_pm_runtime_enable() function. The idea here is that: * When the devm action is called we know that the driver is being removed. It's the perfect time to undo the use_autosuspend. * The code of pm_runtime_dont_use_autosuspend() already handles the case of being called when autosuspend wasn't enabled. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23PM: runtime: add devm_pm_runtime_enable helperDmitry Baryshkov2-0/+21
[ Upstream commit b3636a3a2c51715736d3ec45f635ed03191962ce ] A typical code pattern for pm_runtime_enable() call is to call it in the _probe function and to call pm_runtime_disable() both from _probe error path and from _remove function. For some drivers the whole remove function would consist of the call to pm_remove_disable(). Add helper function to replace this bolierplate piece of code. Calling devm_pm_runtime_enable() removes the need for calling pm_runtime_disable() both in the probe()'s error path and in the remove() function. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20210731195034.979084-2-dmitry.baryshkov@linaro.org Acked-by: Rafael J. Wysocki <rafael@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org> Stable-dep-of: 3d07a411b4fa ("drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nilfs2: fix potential bug in end_buffer_async_writeRyusuke Konishi1-3/+5
commit 5bc09b397cbf1221f8a8aacb1152650c9195b02b upstream. According to a syzbot report, end_buffer_async_write(), which handles the completion of block device writes, may detect abnormal condition of the buffer async_write flag and cause a BUG_ON failure when using nilfs2. Nilfs2 itself does not use end_buffer_async_write(). But, the async_write flag is now used as a marker by commit 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") as a means of resolving double list insertion of dirty blocks in nilfs_lookup_dirty_data_buffers() and nilfs_lookup_node_buffers() and the resulting crash. This modification is safe as long as it is used for file data and b-tree node blocks where the page caches are independent. However, it was irrelevant and redundant to also introduce async_write for segment summary and super root blocks that share buffers with the backing device. This led to the possibility that the BUG_ON check in end_buffer_async_write would fail as described above, if independent writebacks of the backing device occurred in parallel. The use of async_write for segment summary buffers has already been removed in a previous change. Fix this issue by removing the manipulation of the async_write flag for the remaining super root block buffer. Link: https://lkml.kernel.org/r/20240203161645.4992-1-konishi.ryusuke@gmail.com Fixes: 7f42ec394156 ("nilfs2: fix issue with race condition of competition between segments for dirty blocks") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+5c04210f7c7f897c1e7f@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000019a97c05fd42f8c8@google.com Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23sched/membarrier: reduce the ability to hammer on sys_membarrierLinus Torvalds1-0/+9
commit 944d5fe50f3f03daacfea16300e656a1691c4a23 upstream. On some systems, sys_membarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine. Reviewed-and-tested-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Acked-by: Borislav Petkov <bp@alien8.de> Fixes: 22e4ebb97582 ("membarrier: Provide expedited private command") Fixes: c5f58bd58f43 ("membarrier: Provide GLOBAL_EXPEDITED command") Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> [ converted to explicit mutex_*() calls - cleanup.h is not in this stable branch - gregkh ] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23net: prevent mss overflow in skb_segment()Eric Dumazet1-1/+2
commit 23d05d563b7e7b0314e65c8e882bc27eac2da8e7 upstream. Once again syzbot is able to crash the kernel in skb_segment() [1] GSO_BY_FRAGS is a forbidden value, but unfortunately the following computation in skb_segment() can reach it quite easily : mss = mss * partial_segs; 65535 = 3 * 5 * 17 * 257, so many initial values of mss can lead to a bad final result. Make sure to limit segmentation so that the new mss value is smaller than GSO_BY_FRAGS. [1] general protection fault, probably for non-canonical address 0xdffffc000000000e: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 1 PID: 5079 Comm: syz-executor993 Not tainted 6.7.0-rc4-syzkaller-00141-g1ae4cd3cbdd0 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> udp6_ufo_fragment+0xa0e/0xd00 net/ipv6/udp_offload.c:109 ipv6_gso_segment+0x534/0x17e0 net/ipv6/ip6_offload.c:120 skb_mac_gso_segment+0x290/0x610 net/core/gso.c:53 __skb_gso_segment+0x339/0x710 net/core/gso.c:124 skb_gso_segment include/net/gso.h:83 [inline] validate_xmit_skb+0x36c/0xeb0 net/core/dev.c:3626 __dev_queue_xmit+0x6f3/0x3d60 net/core/dev.c:4338 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x257/0x380 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x24c6/0x5220 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0xd5/0x180 net/socket.c:745 __sys_sendto+0x255/0x340 net/socket.c:2190 __do_sys_sendto net/socket.c:2202 [inline] __se_sys_sendto net/socket.c:2198 [inline] __x64_sys_sendto+0xe0/0x1b0 net/socket.c:2198 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x40/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f8692032aa9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 d1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fff8d685418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f8692032aa9 RDX: 0000000000010048 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 00000000000f4240 R08: 0000000020000540 R09: 0000000000000014 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fff8d685480 R13: 0000000000000001 R14: 00007fff8d685480 R15: 0000000000000003 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:skb_segment+0x181d/0x3f30 net/core/skbuff.c:4551 Code: 83 e3 02 e9 fb ed ff ff e8 90 68 1c f9 48 8b 84 24 f8 00 00 00 48 8d 78 70 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 04 02 84 c0 74 08 3c 03 0f 8e 8a 21 00 00 48 8b 84 24 f8 00 RSP: 0018:ffffc900043473d0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000010046 RCX: ffffffff886b1597 RDX: 000000000000000e RSI: ffffffff886b2520 RDI: 0000000000000070 RBP: ffffc90004347578 R08: 0000000000000005 R09: 000000000000ffff R10: 000000000000ffff R11: 0000000000000002 R12: ffff888063202ac0 R13: 0000000000010000 R14: 000000000000ffff R15: 0000000000000046 FS: 0000555556e7e380(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 0000000027ee2000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fixes: 3953c46c3ac7 ("sk_buff: allow segmenting based on frag sizes") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20231212164621.4131800-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23netfilter: ipset: Missing gc cancellations fixedJozsef Kadlecsik2-2/+4
commit 27c5a095e2518975e20a10102908ae8231699879 upstream. The patch fdb8e12cc2cc ("netfilter: ipset: fix performance regression in swap operation") missed to add the calls to gc cancellations at the error path of create operations and at module unload. Also, because the half of the destroy operations now executed by a function registered by call_rcu(), neither NFNL_SUBSYS_IPSET mutex or rcu read lock is held and therefore the checking of them results false warnings. Fixes: 97f7cf1cd80e ("netfilter: ipset: fix performance regression in swap operation") Reported-by: syzbot+52bbc0ad036f6f0d4a25@syzkaller.appspotmail.com Reported-by: Brad Spengler <spender@grsecurity.net> Reported-by: Стас Ничипорович <stasn77@gmail.com> Tested-by: Brad Spengler <spender@grsecurity.net> Tested-by: Стас Ничипорович <stasn77@gmail.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23netfilter: ipset: fix performance regression in swap operationJozsef Kadlecsik5-18/+65
commit 97f7cf1cd80eeed3b7c808b7c12463295c751001 upstream. The patch "netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test", commit 28628fa9 fixes a race condition. But the synchronize_rcu() added to the swap function unnecessarily slows it down: it can safely be moved to destroy and use call_rcu() instead. Eric Dumazet pointed out that simply calling the destroy functions as rcu callback does not work: sets with timeout use garbage collectors which need cancelling at destroy which can wait. Therefore the destroy functions are split into two: cancelling garbage collectors safely at executing the command received by netlink and moving the remaining part only into the rcu callback. Link: https://lore.kernel.org/lkml/C0829B10-EAA6-4809-874E-E1E9C05A8D84@automattic.com/ Fixes: 28628fa952fe ("netfilter: ipset: fix race condition between swap/destroy and kernel side add/del/test") Reported-by: Ale Crismani <ale.crismani@automattic.com> Reported-by: David Wang <00107082@163.com> Tested-by: David Wang <00107082@163.com> Signed-off-by: Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cacheOliver Upton1-0/+5
[ Upstream commit ad362fe07fecf0aba839ff2cc59a3617bd42c33f ] There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt. Cc: stable@vger.kernel.org Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240104183233.3560639-1-oliver.upton@linux.dev Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23mips: Fix max_mapnr being uninitialized on early stagesSerge Semin1-7/+5
[ Upstream commit e1a9ae45736989c972a8d1c151bc390678ae6205 ] max_mapnr variable is utilized in the pfn_valid() method in order to determine the upper PFN space boundary. Having it uninitialized effectively makes any PFN passed to that method invalid. That in its turn causes the kernel mm-subsystem occasion malfunctions even after the max_mapnr variable is actually properly updated. For instance, pfn_valid() is called in the init_unavailable_range() method in the framework of the calls-chain on MIPS: setup_arch() +-> paging_init() +-> free_area_init() +-> memmap_init() +-> memmap_init_zone_range() +-> init_unavailable_range() Since pfn_valid() always returns "false" value before max_mapnr is initialized in the mem_init() method, any flatmem page-holes will be left in the poisoned/uninitialized state including the IO-memory pages. Thus any further attempts to map/remap the IO-memory by using MMU may fail. In particular it happened in my case on attempt to map the SRAM region. The kernel bootup procedure just crashed on the unhandled unaligned access bug raised in the __update_cache() method: > Unhandled kernel unaligned access[#1]: > CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.7.0-rc1-XXX-dirty #2056 > ... > Call Trace: > [<8011ef9c>] __update_cache+0x88/0x1bc > [<80385944>] ioremap_page_range+0x110/0x2a4 > [<80126948>] ioremap_prot+0x17c/0x1f4 > [<80711b80>] __devm_ioremap+0x8c/0x120 > [<80711e0c>] __devm_ioremap_resource+0xf4/0x218 > [<808bf244>] sram_probe+0x4f4/0x930 > [<80889d20>] platform_probe+0x68/0xec > ... Let's fix the problem by initializing the max_mapnr variable as soon as the required data is available. In particular it can be done right in the paging_init() method before free_area_init() is called since all the PFN zone boundaries have already been calculated by that time. Cc: stable@vger.kernel.org Signed-off-by: Serge Semin <fancer.lancer@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23arch, mm: remove stale mentions of DISCONIGMEMMike Rapoport7-27/+6
[ Upstream commit d3c251ab95b69f3dc189c4657baeac1b4c050789 ] There are several places that mention DISCONIGMEM in comments or have stale code guarded by CONFIG_DISCONTIGMEM. Remove the dead code and update the comments. Link: https://lkml.kernel.org/r/20210608091316.3622-7-rppt@kernel.org Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: David Hildenbrand <david@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Matt Turner <mattst88@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Stable-dep-of: e1a9ae457369 ("mips: Fix max_mapnr being uninitialized on early stages") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23bus: moxtet: Add spi device tableSjoerd Simons1-0/+7
[ Upstream commit aaafe88d5500ba18b33be72458439367ef878788 ] The moxtet module fails to auto-load on. Add a SPI id table to allow it to do so. Signed-off-by: Sjoerd Simons <sjoerd@collabora.com> Cc: <stable@vger.kernel.org> Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23Revert "md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d"Junxiao Bi1-12/+0
[ Upstream commit bed9e27baf52a09b7ba2a3714f1e24e17ced386d ] This reverts commit 5e2cf333b7bd5d3e62595a44d598a254c697cd74. That commit introduced the following race and can cause system hung. md_write_start: raid5d: // mddev->in_sync == 1 set "MD_SB_CHANGE_PENDING" // running before md_write_start wakeup it waiting "MD_SB_CHANGE_PENDING" cleared >>>>>>>>> hung wakeup mddev->thread ... waiting "MD_SB_CHANGE_PENDING" cleared >>>> hung, raid5d should clear this flag but get hung by same flag. The issue reverted commit fixing is fixed by last patch in a new way. Fixes: 5e2cf333b7bd ("md/raid5: Wait for MD_SB_CHANGE_PENDING in raid5d") Cc: stable@vger.kernel.org # v5.19+ Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20231108182216.73611-2-junxiao.bi@oracle.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23tracing: Inform kmemleak of saved_cmdlines allocationSteven Rostedt (Google)1-0/+3
commit 2394ac4145ea91b92271e675a09af2a9ea6840b7 upstream. The allocation of the struct saved_cmdlines_buffer structure changed from: s = kmalloc(sizeof(*s), GFP_KERNEL); s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL); to: orig_size = sizeof(*s) + val * TASK_COMM_LEN; order = get_order(orig_size); size = 1 << (order + PAGE_SHIFT); page = alloc_pages(GFP_KERNEL, order); if (!page) return NULL; s = page_address(page); memset(s, 0, sizeof(*s)); s->saved_cmdlines = kmalloc_array(TASK_COMM_LEN, val, GFP_KERNEL); Where that s->saved_cmdlines allocation looks to be a dangling allocation to kmemleak. That's because kmemleak only keeps track of kmalloc() allocations. For allocations that use page_alloc() directly, the kmemleak needs to be explicitly informed about it. Add kmemleak_alloc() and kmemleak_free() around the page allocation so that it doesn't give the following false positive: unreferenced object 0xffff8881010c8000 (size 32760): comm "swapper", pid 0, jiffies 4294667296 hex dump (first 32 bytes): ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................ backtrace (crc ae6ec1b9): [<ffffffff86722405>] kmemleak_alloc+0x45/0x80 [<ffffffff8414028d>] __kmalloc_large_node+0x10d/0x190 [<ffffffff84146ab1>] __kmalloc+0x3b1/0x4c0 [<ffffffff83ed7103>] allocate_cmdlines_buffer+0x113/0x230 [<ffffffff88649c34>] tracer_alloc_buffers.isra.0+0x124/0x460 [<ffffffff8864a174>] early_trace_init+0x14/0xa0 [<ffffffff885dd5ae>] start_kernel+0x12e/0x3c0 [<ffffffff885f5758>] x86_64_start_reservations+0x18/0x30 [<ffffffff885f582b>] x86_64_start_kernel+0x7b/0x80 [<ffffffff83a001c3>] secondary_startup_64_no_verify+0x15e/0x16b Link: https://lore.kernel.org/linux-trace-kernel/87r0hfnr9r.fsf@kernel.org/ Link: https://lore.kernel.org/linux-trace-kernel/20240214112046.09a322d6@gandalf.local.home Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Fixes: 44dc5c41b5b1 ("tracing: Fix wasted memory in saved_cmdlines logic") Reported-by: Kalle Valo <kvalo@kernel.org> Tested-by: Kalle Valo <kvalo@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23pmdomain: core: Move the unused cleanup to a _sync initcallKonrad Dybcio1-1/+1
commit 741ba0134fa7822fcf4e4a0a537a5c4cfd706b20 upstream. The unused clock cleanup uses the _sync initcall to give all users at earlier initcalls time to probe. Do the same to avoid leaving some PDs dangling at "on" (which actually happened on qcom!). Fixes: 2fe71dcdfd10 ("PM / domains: Add late_initcall to disable unused PM domains") Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20231227-topic-pmdomain_sync_cleanup-v1-1-5f36769d538b@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23can: j1939: Fix UAF in j1939_sk_match_filter during setsockopt(SO_J1939_FILTER)Oleksij Rempel2-4/+19
commit efe7cf828039aedb297c1f9920b638fffee6aabc upstream. Lock jsk->sk to prevent UAF when setsockopt(..., SO_J1939_FILTER, ...) modifies jsk->filters while receiving packets. Following trace was seen on affected system: ================================================================== BUG: KASAN: slab-use-after-free in j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] Read of size 4 at addr ffff888012144014 by task j1939/350 CPU: 0 PID: 350 Comm: j1939 Tainted: G W OE 6.5.0-rc5 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: print_report+0xd3/0x620 ? kasan_complete_mode_report_info+0x7d/0x200 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] kasan_report+0xc2/0x100 ? j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] __asan_load4+0x84/0xb0 j1939_sk_recv_match_one+0x1af/0x2d0 [can_j1939] j1939_sk_recv+0x20b/0x320 [can_j1939] ? __kasan_check_write+0x18/0x20 ? __pfx_j1939_sk_recv+0x10/0x10 [can_j1939] ? j1939_simple_recv+0x69/0x280 [can_j1939] ? j1939_ac_recv+0x5e/0x310 [can_j1939] j1939_can_recv+0x43f/0x580 [can_j1939] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] ? raw_rcv+0x42/0x3c0 [can_raw] ? __pfx_j1939_can_recv+0x10/0x10 [can_j1939] can_rcv_filter+0x11f/0x350 [can] can_receive+0x12f/0x190 [can] ? __pfx_can_rcv+0x10/0x10 [can] can_rcv+0xdd/0x130 [can] ? __pfx_can_rcv+0x10/0x10 [can] __netif_receive_skb_one_core+0x13d/0x150 ? __pfx___netif_receive_skb_one_core+0x10/0x10 ? __kasan_check_write+0x18/0x20 ? _raw_spin_lock_irq+0x8c/0xe0 __netif_receive_skb+0x23/0xb0 process_backlog+0x107/0x260 __napi_poll+0x69/0x310 net_rx_action+0x2a1/0x580 ? __pfx_net_rx_action+0x10/0x10 ? __pfx__raw_spin_lock+0x10/0x10 ? handle_irq_event+0x7d/0xa0 __do_softirq+0xf3/0x3f8 do_softirq+0x53/0x80 </IRQ> <TASK> __local_bh_enable_ip+0x6e/0x70 netif_rx+0x16b/0x180 can_send+0x32b/0x520 [can] ? __pfx_can_send+0x10/0x10 [can] ? __check_object_size+0x299/0x410 raw_sendmsg+0x572/0x6d0 [can_raw] ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] ? apparmor_socket_sendmsg+0x2f/0x40 ? __pfx_raw_sendmsg+0x10/0x10 [can_raw] sock_sendmsg+0xef/0x100 sock_write_iter+0x162/0x220 ? __pfx_sock_write_iter+0x10/0x10 ? __rtnl_unlock+0x47/0x80 ? security_file_permission+0x54/0x320 vfs_write+0x6ba/0x750 ? __pfx_vfs_write+0x10/0x10 ? __fget_light+0x1ca/0x1f0 ? __rcu_read_unlock+0x5b/0x280 ksys_write+0x143/0x170 ? __pfx_ksys_write+0x10/0x10 ? __kasan_check_read+0x15/0x20 ? fpregs_assert_state_consistent+0x62/0x70 __x64_sys_write+0x47/0x60 do_syscall_64+0x60/0x90 ? do_syscall_64+0x6d/0x90 ? irqentry_exit+0x3f/0x50 ? exc_page_fault+0x79/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Allocated by task 348: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_alloc_info+0x1f/0x30 __kasan_kmalloc+0xb5/0xc0 __kmalloc_node_track_caller+0x67/0x160 j1939_sk_setsockopt+0x284/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Freed by task 349: kasan_save_stack+0x2a/0x50 kasan_set_track+0x29/0x40 kasan_save_free_info+0x2f/0x50 __kasan_slab_free+0x12e/0x1c0 __kmem_cache_free+0x1b9/0x380 kfree+0x7a/0x120 j1939_sk_setsockopt+0x3b2/0x450 [can_j1939] __sys_setsockopt+0x15c/0x2f0 __x64_sys_setsockopt+0x6b/0x80 do_syscall_64+0x60/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 9d71dd0c70099 ("can: add support of SAE J1939 protocol") Reported-by: Sili Luo <rootlab@huawei.com> Suggested-by: Sili Luo <rootlab@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Cc: stable@vger.kernel.org Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20231020133814.383996-1-o.rempel@pengutronix.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23irqchip/irq-brcmstb-l2: Add write memory barrier before exitDoug Berger1-1/+4
commit b0344d6854d25a8b3b901c778b1728885dd99007 upstream. It was observed on Broadcom devices that use GIC v3 architecture L1 interrupt controllers as the parent of brcmstb-l2 interrupt controllers that the deactivation of the parent interrupt could happen before the brcmstb-l2 deasserted its output. This would lead the GIC to reactivate the interrupt only to find that no L2 interrupt was pending. The result was a spurious interrupt invoking handle_bad_irq() with its associated messaging. While this did not create a functional problem it is a waste of cycles. The hazard exists because the memory mapped bus writes to the brcmstb-l2 registers are buffered and the GIC v3 architecture uses a very efficient system register write to deactivate the interrupt. Add a write memory barrier prior to invoking chained_irq_exit() to introduce a dsb(st) on those systems to ensure the system register write cannot be executed until the memory mapped writes are visible to the system. [ florian: Added Fixes tag ] Fixes: 7f646e92766e ("irqchip: brcmstb-l2: Add Broadcom Set Top Box Level-2 interrupt controller") Signed-off-by: Doug Berger <opendmb@gmail.com> Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Florian Fainelli <florian.fainelli@broadcom.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240210012449.3009125-1-florian.fainelli@broadcom.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfp: flower: prevent re-adding mac index for bonded portDaniel de Villiers1-1/+1
commit 1a1c13303ff6d64e6f718dc8aa614e580ca8d9b4 upstream. When physical ports are reset (either through link failure or manually toggled down and up again) that are slaved to a Linux bond with a tunnel endpoint IP address on the bond device, not all tunnel packets arriving on the bond port are decapped as expected. The bond dev assigns the same MAC address to itself and each of its slaves. When toggling a slave device, the same MAC address is therefore offloaded to the NFP multiple times with different indexes. The issue only occurs when re-adding the shared mac. The nfp_tunnel_add_shared_mac() function has a conditional check early on that checks if a mac entry already exists and if that mac entry is global: (entry && nfp_tunnel_is_mac_idx_global(entry->index)). In the case of a bonded device (For example br-ex), the mac index is obtained, and no new index is assigned. We therefore modify the conditional in nfp_tunnel_add_shared_mac() to check if the port belongs to the LAG along with the existing checks to prevent a new global mac index from being re-assigned to the slave port. Fixes: 20cce8865098 ("nfp: flower: enable MAC address sharing for offloadable devs") CC: stable@vger.kernel.org # 5.1+ Signed-off-by: Daniel de Villiers <daniel.devilliers@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfp: use correct macro for LengthSelect in BAR configDaniel Basilio1-2/+4
commit b3d4f7f2288901ed2392695919b3c0e24c1b4084 upstream. The 1st and 2nd expansion BAR configuration registers are configured, when the driver starts up, in variables 'barcfg_msix_general' and 'barcfg_msix_xpb', respectively. The 'LengthSelect' field is ORed in from bit 0, which is incorrect. The 'LengthSelect' field should start from bit 27. This has largely gone un-noticed because NFP_PCIE_BAR_PCIE2CPP_LengthSelect_32BIT happens to be 0. Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Cc: stable@vger.kernel.org # 4.11+ Signed-off-by: Daniel Basilio <daniel.basilio@corigine.com> Signed-off-by: Louis Peens <louis.peens@corigine.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nilfs2: fix hang in nilfs_lookup_dirty_data_buffers()Ryusuke Konishi1-1/+7
commit 38296afe3c6ee07319e01bb249aa4bb47c07b534 upstream. Syzbot reported a hang issue in migrate_pages_batch() called by mbind() and nilfs_lookup_dirty_data_buffers() called in the log writer of nilfs2. While migrate_pages_batch() locks a folio and waits for the writeback to complete, the log writer thread that should bring the writeback to completion picks up the folio being written back in nilfs_lookup_dirty_data_buffers() that it calls for subsequent log creation and was trying to lock the folio. Thus causing a deadlock. In the first place, it is unexpected that folios/pages in the middle of writeback will be updated and become dirty. Nilfs2 adds a checksum to verify the validity of the log being written and uses it for recovery at mount, so data changes during writeback are suppressed. Since this is broken, an unclean shutdown could potentially cause recovery to fail. Investigation revealed that the root cause is that the wait for writeback completion in nilfs_page_mkwrite() is conditional, and if the backing device does not require stable writes, data may be modified without waiting. Fix these issues by making nilfs_page_mkwrite() wait for writeback to finish regardless of the stable write requirement of the backing device. Link: https://lkml.kernel.org/r/20240131145657.4209-1-konishi.ryusuke@gmail.com Fixes: 1d1d1a767206 ("mm: only enforce stable page writes if the backing device requires it") Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Reported-by: syzbot+ee2ae68da3b22d04cd8d@syzkaller.appspotmail.com Closes: https://lkml.kernel.org/r/00000000000047d819061004ad6c@google.com Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nilfs2: fix data corruption in dsync block recovery for small block sizesRyusuke Konishi1-3/+4
commit 67b8bcbaed4777871bb0dcc888fb02a614a98ab1 upstream. The helper function nilfs_recovery_copy_block() of nilfs_recovery_dsync_blocks(), which recovers data from logs created by data sync writes during a mount after an unclean shutdown, incorrectly calculates the on-page offset when copying repair data to the file's page cache. In environments where the block size is smaller than the page size, this flaw can cause data corruption and leak uninitialized memory bytes during the recovery process. Fix these issues by correcting this byte offset calculation on the page. Link: https://lkml.kernel.org/r/20240124121936.10575-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23ALSA: hda/conexant: Add quirk for SWS JS201Dbo liu1-0/+18
commit 4639c5021029d49fd2f97fa8d74731f167f98919 upstream. The SWS JS201D need a different pinconfig from windows driver. Add a quirk to use a specific pinconfig to SWS JS201D. Signed-off-by: bo liu <bo.liu@senarytech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240205013802.51907-1-bo.liu@senarytech.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23mmc: slot-gpio: Allow non-sleeping GPIO roAlexander Stein1-1/+5
commit cc9432c4fb159a3913e0ce3173b8218cd5bad2e0 upstream. This change uses the appropriate _cansleep or non-sleeping API for reading GPIO read-only state. This allows users with GPIOs that never sleepbeing called in atomic context. Implement the same mechanism as in commit 52af318c93e97 ("mmc: Allow non-sleeping GPIO cd"). Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240206083912.2543142-1-alexander.stein@ew.tq-group.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23x86/mm/ident_map: Use gbpages only where full GB page should be mapped.Steve Wahl1-5/+18
commit d794734c9bbfe22f86686dc2909c25f5ffe1a572 upstream. When ident_pud_init() uses only gbpages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. On UV systems, this ends up including regions that will cause hardware to halt the system if accessed (these are marked "reserved" by BIOS). Even processor speculation into these regions is enough to trigger the system halt. Only use gbpages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full gbpage. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. [ dhansen: fix up comment formatting, simplifty changelog ] Signed-off-by: Steve Wahl <steve.wahl@hpe.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/all/20240126164841.170866-1-steve.wahl%40hpe.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23x86/Kconfig: Transmeta Crusoe is CPU family 5, not 6Aleksander Mazur1-1/+1
commit f6a1892585cd19e63c4ef2334e26cd536d5b678d upstream. The kernel built with MCRUSOE is unbootable on Transmeta Crusoe. It shows the following error message: This kernel requires an i686 CPU, but only detected an i586 CPU. Unable to boot - please use a kernel appropriate for your CPU. Remove MCRUSOE from the condition introduced in commit in Fixes, effectively changing X86_MINIMUM_CPU_FAMILY back to 5 on that machine, which matches the CPU family given by CPUID. [ bp: Massage commit message. ] Fixes: 25d76ac88821 ("x86/Kconfig: Explicitly enumerate i686-class CPUs in Kconfig") Signed-off-by: Aleksander Mazur <deweloper@wp.pl> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Acked-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20240123134309.1117782-1-deweloper@wp.pl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23serial: max310x: improve crystal stable clock detectionHugo Villeneuve1-5/+16
commit 93cd256ab224c2519e7c4e5f58bb4f1ac2bf0965 upstream. Some people are seeing a warning similar to this when using a crystal: max310x 11-006c: clock is not stable yet The datasheet doesn't mention the maximum time to wait for the clock to be stable when using a crystal, and it seems that the 10ms delay in the driver is not always sufficient. Jan Kundrát reported that it took three tries (each separated by 10ms) to get a stable clock. Modify behavior to check stable clock ready bit multiple times (20), and waiting 10ms between each try. Note: the first draft of the driver originally used a 50ms delay, without checking the clock stable bit. Then a loop with 1000 retries was implemented, each time reading the clock stable bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Suggested-by: Jan Kundrát <jan.kundrat@cesnet.cz> Link: https://www.spinics.net/lists/linux-serial/msg35773.html Link: https://lore.kernel.org/all/20240110174015.6f20195fde08e5c9e64e5675@hugovil.com/raw Link: https://github.com/boundarydevices/linux/commit/e5dfe3e4a751392515d78051973190301a37ca9a Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-3-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23serial: max310x: set default value when reading clock ready bitHugo Villeneuve1-1/+1
commit 0419373333c2f2024966d36261fd82a453281e80 upstream. If regmap_read() returns a non-zero value, the 'val' variable can be left uninitialized. Clear it before calling regmap_read() to make sure we properly detect the clock ready bit. Fixes: 4cf9a888fd3c ("serial: max310x: Check the clock readiness") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Link: https://lore.kernel.org/r/20240116213001.3691629-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23ring-buffer: Clean ring_buffer_poll_wait() error returnVincent Donnefort1-1/+1
commit 66bbea9ed6446b8471d365a22734dc00556c4785 upstream. The return type for ring_buffer_poll_wait() is __poll_t. This is behind the scenes an unsigned where we can set event bits. In case of a non-allocated CPU, we do return instead -EINVAL (0xffffffea). Lucky us, this ends up setting few error bits (EPOLLERR | EPOLLHUP | EPOLLNVAL), so user-space at least is aware something went wrong. Nonetheless, this is an incorrect code. Replace that -EINVAL with a proper EPOLLERR to clean that output. As this doesn't change the behaviour, there's no need to treat this change as a bug fix. Link: https://lore.kernel.org/linux-trace-kernel/20240131140955.3322792-1-vdonnefort@google.com Cc: stable@vger.kernel.org Fixes: 6721cb6002262 ("ring-buffer: Do not poll non allocated cpu buffers") Signed-off-by: Vincent Donnefort <vdonnefort@google.com> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23iio: magnetometer: rm3100: add boundary check for the value read from ↵zhili.liu1-2/+8
RM3100_REG_TMRC commit 792595bab4925aa06532a14dd256db523eb4fa5e upstream. Recently, we encounter kernel crash in function rm3100_common_probe caused by out of bound access of array rm3100_samp_rates (because of underlying hardware failures). Add boundary check to prevent out of bound access. Fixes: 121354b2eceb ("iio: magnetometer: Add driver support for PNI RM3100") Suggested-by: Zhouyi Zhou <zhouzhouyi@gmail.com> Signed-off-by: zhili.liu <zhili.liu@ucas.com.cn> Link: https://lore.kernel.org/r/1704157631-3814-1-git-send-email-zhouzhouyi@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23staging: iio: ad5933: fix type mismatch regressionDavid Schiller1-1/+1
commit 6db053cd949fcd6254cea9f2cd5d39f7bd64379c upstream. Commit 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") fixed a compiler warning, but introduced a bug that resulted in one of the two 16 bit IIO channels always being zero (when both are enabled). This is because int is 32 bits wide on most architectures and in the case of a little-endian machine the two most significant bytes would occupy the buffer for the second channel as 'val' is being passed as a void pointer to 'iio_push_to_buffers()'. Fix by defining 'val' as u16. Tested working on ARM64. Fixes: 4c3577db3e4f ("Staging: iio: impedance-analyzer: Fix sparse warning") Signed-off-by: David Schiller <david.schiller@jku.at> Link: https://lore.kernel.org/r/20240122134916.2137957-1-david.schiller@jku.at Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23tracing: Fix wasted memory in saved_cmdlines logicSteven Rostedt (Google)1-38/+37
commit 44dc5c41b5b1267d4dd037d26afc0c4d3a568acb upstream. While looking at improving the saved_cmdlines cache I found a huge amount of wasted memory that should be used for the cmdlines. The tracing data saves pids during the trace. At sched switch, if a trace occurred, it will save the comm of the task that did the trace. This is saved in a "cache" that maps pids to comms and exposed to user space via the /sys/kernel/tracing/saved_cmdlines file. Currently it only caches by default 128 comms. The structure that uses this creates an array to store the pids using PID_MAX_DEFAULT (which is usually set to 32768). This causes the structure to be of the size of 131104 bytes on 64 bit machines. In hex: 131104 = 0x20020, and since the kernel allocates generic memory in powers of two, the kernel would allocate 0x40000 or 262144 bytes to store this structure. That leaves 131040 bytes of wasted space. Worse, the structure points to an allocated array to store the comm names, which is 16 bytes times the amount of names to save (currently 128), which is 2048 bytes. Instead of allocating a separate array, make the structure end with a variable length string and use the extra space for that. This is similar to a recommendation that Linus had made about eventfs_inode names: https://lore.kernel.org/all/20240130190355.11486-5-torvalds@linux-foundation.org/ Instead of allocating a separate string array to hold the saved comms, have the structure end with: char saved_cmdlines[]; and round up to the next power of two over sizeof(struct saved_cmdline_buffers) + num_cmdlines * TASK_COMM_LEN It will use this extra space for the saved_cmdline portion. Now, instead of saving only 128 comms by default, by using this wasted space at the end of the structure it can save over 8000 comms and even saves space by removing the need for allocating the other array. Link: https://lore.kernel.org/linux-trace-kernel/20240209063622.1f7b6d5f@rorschach.local.home Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Vincent Donnefort <vdonnefort@google.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Mete Durlu <meted@linux.ibm.com> Fixes: 939c7a4f04fcd ("tracing: Introduce saved_cmdlines_size file") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23ext4: fix double-free of blocks due to wrong extents moved_lenBaokun Li1-4/+2
commit 55583e899a5357308274601364741a83e78d6ac4 upstream. In ext4_move_extents(), moved_len is only updated when all moves are successfully executed, and only discards orig_inode and donor_inode preallocations when moved_len is not zero. When the loop fails to exit after successfully moving some extents, moved_len is not updated and remains at 0, so it does not discard the preallocations. If the moved extents overlap with the preallocated extents, the overlapped extents are freed twice in ext4_mb_release_inode_pa() and ext4_process_freed_data() (as described in commit 94d7c16cbbbd ("ext4: Fix double-free of blocks with EXT4_IOC_MOVE_EXT")), and bb_free is incremented twice. Hence when trim is executed, a zero-division bug is triggered in mb_update_avg_fragment_size() because bb_free is not zero and bb_fragments is zero. Therefore, update move_len after each extent move to avoid the issue. Reported-by: Wei Chen <harperchen1110@gmail.com> Reported-by: xingwei lee <xrivendell7@gmail.com> Closes: https://lore.kernel.org/r/CAO4mrferzqBUnCag8R3m2zf897ts9UEuhjFQGPtODT92rYyR2Q@mail.gmail.com Fixes: fcf6b1b729bc ("ext4: refactor ext4_move_extents code base") CC: <stable@vger.kernel.org> # 3.18 Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240104142040.2835097-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23misc: fastrpc: Mark all sessions as invalid in cb_removeEkansh Gupta1-1/+1
commit a4e61de63e34860c36a71d1a364edba16fb6203b upstream. In remoteproc shutdown sequence, rpmsg_remove will get called which would depopulate all the child nodes that have been created during rpmsg_probe. This would result in cb_remove call for all the context banks for the remoteproc. In cb_remove function, session 0 is getting skipped which is not correct as session 0 will never become available again. Add changes to mark session 0 also as invalid. Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable <stable@kernel.org> Signed-off-by: Ekansh Gupta <quic_ekangupt@quicinc.com> Link: https://lore.kernel.org/r/20240108114833.20480-1-quic_ekangupt@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23binder: signal epoll threads of self-workCarlos Llamas1-0/+10
commit 97830f3c3088638ff90b20dfba2eb4d487bf14d7 upstream. In (e)poll mode, threads often depend on I/O events to determine when data is ready for consumption. Within binder, a thread may initiate a command via BINDER_WRITE_READ without a read buffer and then make use of epoll_wait() or similar to consume any responses afterwards. It is then crucial that epoll threads are signaled via wakeup when they queue their own work. Otherwise, they risk waiting indefinitely for an event leaving their work unhandled. What is worse, subsequent commands won't trigger a wakeup either as the thread has pending work. Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Cc: Arve Hjønnevåg <arve@android.com> Cc: Martijn Coenen <maco@android.com> Cc: Alice Ryhl <aliceryhl@google.com> Cc: Steven Moreland <smoreland@google.com> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Carlos Llamas <cmllamas@google.com> Link: https://lore.kernel.org/r/20240131215347.1808751-1-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23ALSA: hda/realtek: Enable headset mic on Vaio VJFE-ADLEdson Juliano Drosdeck1-0/+1
commit c7de2d9bb68a5fc71c25ff96705a80a76c8436eb upstream. Vaio VJFE-ADL is equipped with ALC269VC, and it needs ALC298_FIXUP_SPK_VOLUME quirk to make its headset mic work. Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20240201122114.30080-1-edson.drosdeck@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23xen-netback: properly sync TX responsesJan Beulich1-44/+40
commit 7b55984c96ffe9e236eb9c82a2196e0b1f84990d upstream. Invoking the make_tx_response() / push_tx_responses() pair with no lock held would be acceptable only if all such invocations happened from the same context (NAPI instance or dealloc thread). Since this isn't the case, and since the interface "spec" also doesn't demand that multicast operations may only be performed with no in-flight transmits, MCAST_{ADD,DEL} processing also needs to acquire the response lock around the invocations. To prevent similar mistakes going forward, "downgrade" the present functions to private helpers of just the two remaining ones using them directly, with no forward declarations anymore. This involves renaming what so far was make_tx_response(), for the new function of that name to serve the new (wrapper) purpose. While there, - constify the txp parameters, - correct xenvif_idx_release()'s status parameter's type, - rename {,_}make_tx_response()'s status parameters for consistency with xenvif_idx_release()'s. Fixes: 210c34dcd8d9 ("xen-netback: add support for multicast control") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/980c6c3d-e10e-4459-8565-e8fbde122f00@suse.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23nfc: nci: free rx_data_reassembly skb on NCI device cleanupFedor Pchelkin1-0/+4
commit bfb007aebe6bff451f7f3a4be19f4f286d0d5d9c upstream. rx_data_reassembly skb is stored during NCI data exchange for processing fragmented packets. It is dropped only when the last fragment is processed or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received. However, the NCI device may be deallocated before that which leads to skb leak. As by design the rx_data_reassembly skb is bound to the NCI device and nothing prevents the device to be freed before the skb is processed in some way and cleaned, free it on the NCI device cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Cc: stable@vger.kernel.org Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/ Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23kbuild: Fix changing ELF file type for output of gen_btf for big endianNathan Chancellor1-2/+7
commit e3a9ee963ad8ba677ca925149812c5932b49af69 upstream. Commit 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF") changed the ELF type of .btf.vmlinux.bin.o to ET_REL via dd, which works fine for little endian platforms: 00000000 7f 45 4c 46 02 01 01 00 00 00 00 00 00 00 00 00 |.ELF............| -00000010 03 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................| +00000010 01 00 b7 00 01 00 00 00 00 00 00 80 00 80 ff ff |................| However, for big endian platforms, it changes the wrong byte, resulting in an invalid ELF file type, which ld.lld rejects: 00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............| -00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| +00000010 01 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| Type: <unknown>: 103 ld.lld: error: .btf.vmlinux.bin.o: unknown file type Fix this by updating the entire 16-bit e_type field rather than just a single byte, so that everything works correctly for all platforms and linkers. 00000000 7f 45 4c 46 02 02 01 00 00 00 00 00 00 00 00 00 |.ELF............| -00000010 00 03 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| +00000010 00 01 00 16 00 00 00 01 00 00 00 00 00 10 00 00 |................| Type: REL (Relocatable file) While in the area, update the comment to mention that binutils 2.35+ matches LLD's behavior of rejecting an ET_EXEC input, which occurred after the comment was added. Cc: stable@vger.kernel.org Fixes: 90ceddcb4950 ("bpf: Support llvm-objcopy for vmlinux BTF") Link: https://github.com/llvm/llvm-project/pull/75643 Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Fangrui Song <maskray@google.com> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Justin Stitt <justinstitt@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> [nathan: Fix silent conflict due to lack of 7d153696e5db in older trees] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23firewire: core: correct documentation of fw_csr_string() kernel APITakashi Sakamoto1-4/+3
commit 5f9ab17394f831cb7986ec50900fa37507a127f1 upstream. Against its current description, the kernel API can accepts all types of directory entries. This commit corrects the documentation. Cc: stable@vger.kernel.org Fixes: 3c2c58cb33b3 ("firewire: core: fw_csr_string addendum") Link: https://lore.kernel.org/r/20240130100409.30128-2-o-takashi@sakamocchi.jp Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"Lee Duncan1-12/+8
commit 977fe773dcc7098d8eaf4ee6382cb51e13e784cb upstream. This reverts commit 1a1975551943f681772720f639ff42fbaa746212. This commit causes interrupts to be lost for FCoE devices, since it changed sping locks from "bh" to "irqsave". Instead, a work queue should be used, and will be addressed in a separate commit. Fixes: 1a1975551943 ("scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock") Signed-off-by: Lee Duncan <lduncan@suse.com> Link: https://lore.kernel.org/r/c578cdcd46b60470535c4c4a953e6a1feca0dffd.1707500786.git.lduncan@suse.com Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-23i2c: i801: Fix block process call transactionsJean Delvare1-2/+2
[ Upstream commit c1c9d0f6f7f1dbf29db996bd8e166242843a5f21 ] According to the Intel datasheets, software must reset the block buffer index twice for block process call transactions: once before writing the outgoing data to the buffer, and once again before reading the incoming data from the buffer. The driver is currently missing the second reset, causing the wrong portion of the block buffer to be read. Signed-off-by: Jean Delvare <jdelvare@suse.de> Reported-by: Piotr Zakowski <piotr.zakowski@intel.com> Closes: https://lore.kernel.org/linux-i2c/20240213120553.7b0ab120@endymion.delvare/ Fixes: 315cd67c9453 ("i2c: i801: Add Block Write-Block Read Process Call support") Reviewed-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23i2c: i801: Remove i801_set_block_buffer_modeHeiner Kallweit1-12/+5
[ Upstream commit 1e1d6582f483a4dba4ea03445e6f2f05d9de5bcf ] If FEATURE_BLOCK_BUFFER is set then bit SMBAUXCTL_E32B is supported and there's no benefit in reading it back. Origin of this check seems to be 14 yrs ago when people were not completely sure which chip versions support the block buffer mode. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Tested-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@kernel.org> Stable-dep-of: c1c9d0f6f7f1 ("i2c: i801: Fix block process call transactions") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-02-23usb: f_mass_storage: forbid async queue when shutdown happenyuan linyu1-2/+18
commit b2d2d7ea0dd09802cf5a0545bf54d8ad8987d20c upstream. When write UDC to empty and unbind gadget driver from gadget device, it is possible that there are many queue failures for mass storage function. The root cause is mass storage main thread alaways try to queue request to receive a command from host if running flag is on, on platform like dwc3, if pull down called, it will not queue request again and return -ESHUTDOWN, but it not affect running flag of mass storage function. Check return code from mass storage function and clear running flag if it is -ESHUTDOWN, also indicate start in/out transfer failure to break loops. Cc: stable <stable@kernel.org> Signed-off-by: yuan linyu <yuanlinyu@hihonor.com> Reviewed-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20240123034829.3848409-1-yuanlinyu@hihonor.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 17:31:56 +0300