summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-20Linux 5.4.265v5.4.265Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20231218135042.748715259@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: kernelci.org bot <bot@kernelci.org> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20powerpc/ftrace: Fix stack teardown in ftrace_no_traceNaveen N Rao1-2/+2
commit 4b3338aaa74d7d4ec5b6734dc298f0db94ec83d2 upstream. Commit 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") added use of a new stack frame on ftrace entry to fix stack unwind. However, the commit missed updating the offset used while tearing down the ftrace stack when ftrace is disabled. Fix the same. In addition, the commit missed saving the correct stack pointer in pt_regs. Update the same. Fixes: 41a506ef71eb ("powerpc/ftrace: Create a dummy stackframe to fix stack unwind") Cc: stable@vger.kernel.org # v6.5+ Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20231130065947.2188860-1-naveen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20powerpc/ftrace: Create a dummy stackframe to fix stack unwindNaveen N Rao1-2/+11
commit 41a506ef71eb38d94fe133f565c87c3e06ccc072 upstream. With ppc64 -mprofile-kernel and ppc32 -pg, profiling instructions to call into ftrace are emitted right at function entry. The instruction sequence used is minimal to reduce overhead. Crucially, a stackframe is not created for the function being traced. This breaks stack unwinding since the function being traced does not have a stackframe for itself. As such, it never shows up in the backtrace: /sys/kernel/debug/tracing # echo 1 > /proc/sys/kernel/stack_tracer_enabled /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 4144 32 ftrace_call+0x4/0x44 1) 4112 432 get_page_from_freelist+0x26c/0x1ad0 2) 3680 496 __alloc_pages+0x290/0x1280 3) 3184 336 __folio_alloc+0x34/0x90 4) 2848 176 vma_alloc_folio+0xd8/0x540 5) 2672 272 __handle_mm_fault+0x700/0x1cc0 6) 2400 208 handle_mm_fault+0xf0/0x3f0 7) 2192 80 ___do_page_fault+0x3e4/0xbe0 8) 2112 160 do_page_fault+0x30/0xc0 9) 1952 256 data_access_common_virt+0x210/0x220 10) 1696 400 0xc00000000f16b100 11) 1296 384 load_elf_binary+0x804/0x1b80 12) 912 208 bprm_execve+0x2d8/0x7e0 13) 704 64 do_execveat_common+0x1d0/0x2f0 14) 640 160 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 Fix this by having ftrace create a dummy stackframe for the function being traced. With this, backtraces now capture the function being traced: /sys/kernel/debug/tracing # cat stack_trace Depth Size Location (17 entries) ----- ---- -------- 0) 3888 32 _raw_spin_trylock+0x8/0x70 1) 3856 576 get_page_from_freelist+0x26c/0x1ad0 2) 3280 64 __alloc_pages+0x290/0x1280 3) 3216 336 __folio_alloc+0x34/0x90 4) 2880 176 vma_alloc_folio+0xd8/0x540 5) 2704 416 __handle_mm_fault+0x700/0x1cc0 6) 2288 96 handle_mm_fault+0xf0/0x3f0 7) 2192 48 ___do_page_fault+0x3e4/0xbe0 8) 2144 192 do_page_fault+0x30/0xc0 9) 1952 608 data_access_common_virt+0x210/0x220 10) 1344 16 0xc0000000334bbb50 11) 1328 416 load_elf_binary+0x804/0x1b80 12) 912 64 bprm_execve+0x2d8/0x7e0 13) 848 176 do_execveat_common+0x1d0/0x2f0 14) 672 192 sys_execve+0x54/0x70 15) 480 64 system_call_exception+0x138/0x350 16) 416 416 system_call_common+0x160/0x2c4 This results in two additional stores in the ftrace entry code, but produces reliable backtraces. Fixes: 153086644fd1 ("powerpc/ftrace: Add support for -mprofile-kernel ftrace ABI") Cc: stable@vger.kernel.org Signed-off-by: Naveen N Rao <naveen@kernel.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230621051349.759567-1-naveen@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20mmc: block: Be sure to wait while busy in CQE error recoveryAdrian Hunter3-2/+7
commit c616696a902987352426fdaeec1b0b3240949e6b upstream. STOP command does not guarantee to wait while busy, but subsequent command MMC_CMDQ_TASK_MGMT to discard the queue will fail if the card is busy, so be sure to wait by employing mmc_poll_for_busy(). Fixes: 72a5af554df8 ("mmc: core: Add support for handling CQE requests") Cc: stable@vger.kernel.org Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Reviewed-by: Christian Loehle <christian.loehle@arm.com> Link: https://lore.kernel.org/r/20231103084720.6886-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20ring-buffer: Fix memory leak of free pageSteven Rostedt (Google)1-0/+2
commit 17d801758157bec93f26faaf5ff1a8b9a552d67a upstream. Reading the ring buffer does a swap of a sub-buffer within the ring buffer with a empty sub-buffer. This allows the reader to have full access to the content of the sub-buffer that was swapped out without having to worry about contention with the writer. The readers call ring_buffer_alloc_read_page() to allocate a page that will be used to swap with the ring buffer. When the code is finished with the reader page, it calls ring_buffer_free_read_page(). Instead of freeing the page, it stores it as a spare. Then next call to ring_buffer_alloc_read_page() will return this spare instead of calling into the memory management system to allocate a new page. Unfortunately, on freeing of the ring buffer, this spare page is not freed, and causes a memory leak. Link: https://lore.kernel.org/linux-trace-kernel/20231210221250.7b9cc83c@rorschach.local.home Cc: stable@vger.kernel.org Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Fixes: 73a757e63114d ("ring-buffer: Return reader page back into existing ring buffer") Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20team: Fix use-after-free when an option instance allocation failsFlorent Revest1-1/+3
commit c12296bbecc488623b7d1932080e394d08f3226b upstream. In __team_options_register, team_options are allocated and appended to the team's option_list. If one option instance allocation fails, the "inst_rollback" cleanup path frees the previously allocated options but doesn't remove them from the team's option_list. This leaves dangling pointers that can be dereferenced later by other parts of the team driver that iterate over options. This patch fixes the cleanup path to remove the dangling pointers from the list. As far as I can tell, this uaf doesn't have much security implications since it would be fairly hard to exploit (an attacker would need to make the allocation of that specific small object fail) but it's still nice to fix. Cc: stable@vger.kernel.org Fixes: 80f7c6683fe0 ("team: add support for per-port options") Signed-off-by: Florent Revest <revest@chromium.org> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20231206123719.1963153-1-revest@chromium.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modifyJames Houghton1-0/+6
commit 3c0696076aad60a2f04c019761921954579e1b0e upstream. It is currently possible for a userspace application to enter an infinite page fault loop when using HugeTLB pages implemented with contiguous PTEs when HAFDBS is not available. This happens because: 1. The kernel may sometimes write PTEs that are sw-dirty but hw-clean (PTE_DIRTY | PTE_RDONLY | PTE_WRITE). 2. If, during a write, the CPU uses a sw-dirty, hw-clean PTE in handling the memory access on a system without HAFDBS, we will get a page fault. 3. HugeTLB will check if it needs to update the dirty bits on the PTE. For contiguous PTEs, it will check to see if the pgprot bits need updating. In this case, HugeTLB wants to write a sequence of sw-dirty, hw-dirty PTEs, but it finds that all the PTEs it is about to overwrite are all pte_dirty() (pte_sw_dirty() => pte_dirty()), so it thinks no update is necessary. We can get the kernel to write a sw-dirty, hw-clean PTE with the following steps (showing the relevant VMA flags and pgprot bits): i. Create a valid, writable contiguous PTE. VMA vmflags: VM_SHARED | VM_READ | VM_WRITE VMA pgprot bits: PTE_RDONLY | PTE_WRITE PTE pgprot bits: PTE_DIRTY | PTE_WRITE ii. mprotect the VMA to PROT_NONE. VMA vmflags: VM_SHARED VMA pgprot bits: PTE_RDONLY PTE pgprot bits: PTE_DIRTY | PTE_RDONLY iii. mprotect the VMA back to PROT_READ | PROT_WRITE. VMA vmflags: VM_SHARED | VM_READ | VM_WRITE VMA pgprot bits: PTE_RDONLY | PTE_WRITE PTE pgprot bits: PTE_DIRTY | PTE_WRITE | PTE_RDONLY Make it impossible to create a writeable sw-dirty, hw-clean PTE with pte_modify(). Such a PTE should be impossible to create, and there may be places that assume that pte_dirty() implies pte_hw_dirty(). Signed-off-by: James Houghton <jthoughton@google.com> Fixes: 031e6e6b4e12 ("arm64: hugetlb: Avoid unnecessary clearing in huge_ptep_set_access_flags") Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Ryan Roberts <ryan.roberts@arm.com> Link: https://lore.kernel.org/r/20231204172646.2541916-3-jthoughton@google.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKSBaokun Li1-0/+4
commit 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 upstream. For files with logical blocks close to EXT_MAX_BLOCKS, the file size predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS. This can cause some blocks to be preallocated that will not be used. And after [Fixes], the following issue may be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:4653! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f Hardware name: linux,dummy-virt (DT) pc : ext4_mb_use_inode_pa+0x148/0x208 lr : ext4_mb_use_inode_pa+0x98/0x208 Call trace: ext4_mb_use_inode_pa+0x148/0x208 ext4_mb_new_inode_pa+0x240/0x4a8 ext4_mb_use_best_found+0x1d4/0x208 ext4_mb_try_best_found+0xc8/0x110 ext4_mb_regular_allocator+0x11c/0xf48 ext4_mb_new_blocks+0x790/0xaa8 ext4_ext_map_blocks+0x7cc/0xd20 ext4_map_blocks+0x170/0x600 ext4_iomap_begin+0x1c0/0x348 ========================================================= Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa(): ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len); if (ac->ac_o_ex.fe_logical >= ex.fe_logical) goto adjust_bex; The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to overflow to a very small value, which ultimately triggers a BUG_ON in ext4_mb_new_inode_pa() because pa->pa_free < len. The last logical block of an actual write request does not exceed EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue. The test case in [Link] can reproduce the above issue with 64k block size. Link: https://patchwork.kernel.org/project/fstests/list/?series=804003 Cc: <stable@kernel.org> # 6.4 Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20soundwire: stream: fix NULL pointer dereference for multi_linkKrzysztof Kozlowski1-3/+4
commit e199bf52ffda8f98f129728d57244a9cd9ad5623 upstream. If bus is marked as multi_link, but number of masters in the stream is not higher than bus->hw_sync_min_links (bus->multi_link && m_rt_count >= bus->hw_sync_min_links), bank switching should not happen. The first part of do_bank_switch() code properly takes these conditions into account, but second part (sdw_ml_sync_bank_switch()) relies purely on bus->multi_link property. This is not balanced and leads to NULL pointer dereference: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 ... Call trace: wait_for_completion_timeout+0x124/0x1f0 do_bank_switch+0x370/0x6f8 sdw_prepare_stream+0x2d0/0x438 qcom_snd_sdw_prepare+0xa0/0x118 sm8450_snd_prepare+0x128/0x148 snd_soc_link_prepare+0x5c/0xe8 __soc_pcm_prepare+0x28/0x1ec dpcm_be_dai_prepare+0x1e0/0x2c0 dpcm_fe_dai_prepare+0x108/0x28c snd_pcm_do_prepare+0x44/0x68 snd_pcm_action_single+0x54/0xc0 snd_pcm_action_nonatomic+0xe4/0xec snd_pcm_prepare+0xc4/0x114 snd_pcm_common_ioctl+0x1154/0x1cc0 snd_pcm_ioctl+0x54/0x74 Fixes: ce6e74d008ff ("soundwire: Add support for multi link bank switch") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20231124180136.390621-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20perf: Fix perf_event_validate_size() lockdep splatMark Rutland1-0/+10
commit 7e2c1e4b34f07d9aa8937fab88359d4a0fce468e upstream. When lockdep is enabled, the for_each_sibling_event(sibling, event) macro checks that event->ctx->mutex is held. When creating a new group leader event, we call perf_event_validate_size() on a partially initialized event where event->ctx is NULL, and so when for_each_sibling_event() attempts to check event->ctx->mutex, we get a splat, as reported by Lucas De Marchi: WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080 This only happens for a new event which is its own group_leader, and in this case there cannot be any sibling events. Thus it's safe to skip the check for siblings, which avoids having to make invasive and ugly changes to for_each_sibling_event(). Avoid the splat by bailing out early when the new event is its own group_leader. Fixes: 382c27f4ed28f803 ("perf: Fix perf_event_validate_size()") Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/ Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/ Reported-by: Lucas De Marchi <lucas.demarchi@intel.com> Reported-by: Pengfei Xu <pengfei.xu@intel.com> Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20HID: hid-asus: add const to read-only outgoing usb bufferDenis Benato1-3/+3
[ Upstream commit 06ae5afce8cc1f7621cc5c7751e449ce20d68af7 ] In the function asus_kbd_set_report the parameter buf is read-only as it gets copied in a memory portion suitable for USB transfer, but the parameter is not marked as const: add the missing const and mark const immutable buffers passed to that function. Signed-off-by: Denis Benato <benato.denis96@gmail.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: usb: qmi_wwan: claim interface 4 for ZTE MF290Lech Perczak1-0/+1
[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ] Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is: Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Cc: Bjørn Mork <bjorn@mork.no> Signed-off-by: Lech Perczak <lech.perczak@gmail.com> Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20asm-generic: qspinlock: fix queued_spin_value_unlocked() implementationLinus Torvalds1-1/+1
[ Upstream commit 125b0bb95dd6bec81b806b997a4ccb026eeecf8f ] We really don't want to do atomic_read() or anything like that, since we already have the value, not the lock. The whole point of this is that we've loaded the lock from memory, and we want to check whether the value we loaded was a locked one or not. The main use of this is the lockref code, which loads both the lock and the reference count in one atomic operation, and then works on that combined value. With the atomic_read(), the compiler would pointlessly spill the value to the stack, in order to then be able to read it back "atomically". This is the qspinlock version of commit c6f4a9002252 ("asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same bug for ticket locks. Cc: Guo Ren <guoren@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Waiman Long <longman@redhat.com> Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zbRkQ@mail.gmail.com/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20HID: multitouch: Add quirk for HONOR GLO-GXXX touchpadAoba K1-0/+5
[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ] Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device. The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX. Signed-off-by: Aoba K <nexp_0x17@outlook.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20HID: hid-asus: reset the backlight brightness level on resumeDenis Benato1-0/+19
[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ] Some devices managed by this driver automatically set brightness to 0 before entering a suspended state and reset it back to a default brightness level after the resume: this has the effect of having the kernel report wrong brightness status after a sleep, and on some devices (like the Asus RC71L) that brightness is the intensity of LEDs directly facing the user. Fix the above issue by setting back brightness to the level it had before entering a sleep state. Signed-off-by: Denis Benato <benato.denis96@gmail.com> Signed-off-by: Luke D. Jones <luke@ljones.dev> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20HID: add ALWAYS_POLL quirk for Apple kbOliver Neukum1-0/+1
[ Upstream commit c55092187d9ad7b2f8f5a8645286fa03997d442f ] These devices disconnect if suspended without remote wakeup. They can operate with the standard driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20platform/x86: intel_telemetry: Fix kernel doc descriptionsAndy Shevchenko1-2/+2
[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ] LKP found issues with a kernel doc in the driver: core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events' core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig' It looks like it were copy'n'paste typos when these descriptions had been introduced. Fix the typos. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/ Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.intel.com Reviewed-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bcache: avoid NULL checking to c->root in run_cache_set()Coly Li1-1/+1
[ Upstream commit 3eba5e0b2422aec3c9e79822029599961fdcab97 ] In run_cache_set() after c->root returned from bch_btree_node_get(), it is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL because bch_btree_node_get() will not return NULL pointer to caller. This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason. Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bcache: add code comments for bch_btree_node_get() and __bch_btree_node_alloc()Coly Li1-0/+7
[ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ] This patch adds code comments to bch_btree_node_get() and __bch_btree_node_alloc() that NULL pointer will not be returned and it is unnecessary to check NULL pointer by the callers of these routines. Signed-off-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20bcache: avoid oversize memory allocation by small stripe_sizeColy Li2-0/+3
[ Upstream commit baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c ] Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are used for dirty data writeback, their sizes are decided by backing device capacity and stripe size. Larger backing device capacity or smaller stripe size make these two arraies occupies more dynamic memory space. Currently bcache->stripe_size is directly inherited from queue->limits.io_opt of underlying storage device. For normal hard drives, its limits.io_opt is 0, and bcache sets the corresponding stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for devices do declare value for queue->limits.io_opt, small stripe_size (comparing to 1TB) becomes an issue for oversize memory allocations of bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the capacity of hard drives gets much larger in recent decade. For example a raid5 array assembled by three 20TB hardrives, the raid device capacity is 40TB with typical 512KB limits.io_opt. After the math calculation in bcache code, these two arraies will occupy 400MB dynamic memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is declared on a new 2TB hard drive, then these two arraies request 2GB and 512MB dynamic memory from kzalloc(). The result is that bcache device always fails to initialize on his system. To avoid the oversize memory allocation, bcache->stripe_size should not directly inherited by queue->limits.io_opt from the underlying device. This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size and set bcache device's stripe size against the declared limits.io_opt value from the underlying storage device, - If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will set its stripe size directly by this limits.io_opt value. - If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will set its stripe size by a value multiplying limits.io_opt and euqal or large than BCH_MIN_STRIPE_SZ. Then the minimal stripe size of a bcache device will always be >= 4MB. For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied by these two arraies will be 2.5MB in total. Such mount of memory allocated for bcache->stripe_sectors_dirty and bcache->full_dirty_stripes is reasonable for most of storage devices. Reported-by: Andrea Tomassetti <andrea.tomassetti-opensource@devo.com> Signed-off-by: Coly Li <colyli@suse.de> Reviewed-by: Eric Wheeler <bcache@lists.ewheeler.net> Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"Ming Lei1-0/+2
[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ] Inside blkg_for_each_descendant_pre(), both css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock, and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held() is called. Fix the warning by adding rcu read lock. Reported-by: Changhui Zhong <czhong@redhat.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20usb: aqc111: check packet for fixup for true limitOliver Neukum1-4/+4
[ Upstream commit ccab434e674ca95d483788b1895a70c21b7f016a ] If a device sends a packet that is inbetween 0 and sizeof(u64) the value passed to skb_trim() as length will wrap around ending up as some very large value. The driver will then proceed to parse the header located at that position, which will either oops or process some random value. The fix is to check against sizeof(u64) rather than 0, which the driver currently does. The issue exists since the introduction of the driver. Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20Revert "PCI: acpiphp: Reassign resources on bridge if necessary"Bjorn Helgaas1-6/+3
commit 5df12742b7e3aae2594a30a9d14d5d6e9e7699f4 upstream. This reverts commit 40613da52b13fb21c5566f10b287e0ca8c12c4e9 and the subsequent fix to it: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") 40613da52b13 fixed a problem where hot-adding a device with large BARs failed if the bridge windows programmed by firmware were not large enough. cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") fixed a problem with 40613da52b13: an ACPI hot-add of a device on a PCI root bus (common in the virt world) or firmware sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron 7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs. Unfortunately the combination of 40613da52b13 and cc22522fd55e caused other problems: - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails sometimes. - Dongli reported a similar problem with hot-add of SCSI disks. - Jonathan reported a console freeze during boot on bare metal due to an error in radeon GPU initialization. Revert both patches to avoid adding these problems. This means we will again see the problems with hot-adding devices with large BARs and the NULL pointer dereferences and suspend/resume issues that 40613da52b13 and cc22522fd55e were intended to fix. Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary") Fixes: cc22522fd55e ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus") Reported-by: Fiona Ebner <f.ebner@proxmox.com> Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.com Reported-by: Dongli Zhang <dongli.zhang@oracle.com> Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.com Reported-by: Jonathan Woithe <jwoithe@just42.net> Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.au Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variantsKai Vehmanen1-0/+2
commit 924f5ca2975b2993ee81a7ecc3c809943a70f334 upstream. On ASUSTeK Z170M PLUS and Z170 PRO GAMING systems, the display codec pins are not registered properly without the force-connect quirk. The codec will report only one pin as having external connectivity, but i915 finds all three connectors on the system, so the two drivers are not in sync. Issue found with DRM igt-gpu-tools test kms_hdmi_inject@inject-audio. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/9801 Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: Jani Saarinen <jani.saarinen@intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20231208132127.2438067-3-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20cred: switch to using atomic_long_tJens Axboe2-36/+36
commit f8fa5d76925991976b3e7076f9d1052515ec1fca upstream. There are multiple ways to grab references to credentials, and the only protection we have against overflowing it is the memory required to do so. With memory sizes only moving in one direction, let's bump the reference count to 64-bit and move it outside the realm of feasibly overflowing. Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-20appletalk: Fix Use-After-Free in atalk_ioctlHyunwoo Kim1-5/+4
[ Upstream commit 189ff16722ee36ced4d2a2469d4ab65a8fee4198 ] Because atalk_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with atalk_recvmsg(). A use-after-free for skb occurs with the following flow. ``` atalk_ioctl() -> skb_peek() atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() ``` Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: stmmac: Handle disabled MDIO busses from devicetreeAndrew Halaney1-1/+5
[ Upstream commit e23c0d21ce9234fbc31ece35663ababbb83f9347 ] Many hardware configurations have the MDIO bus disabled, and are instead using some other MDIO bus to talk to the MAC's phy. of_mdiobus_register() returns -ENODEV in this case. Let's handle it gracefully instead of failing to probe the MAC. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Andrew Halaney <ahalaney@redhat.com> Reviewed-by: Serge Semin <fancer.lancer@gmail.com> Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: stmmac: use dev_err_probe() for reporting mdio bus registration failureRasmus Villemoes2-4/+4
[ Upstream commit 839612d23ffd933174db911ce56dc3f3ca883ec5 ] I have a board where these two lines are always printed during boot: imx-dwmac 30bf0000.ethernet: Cannot register the MDIO bus imx-dwmac 30bf0000.ethernet: stmmac_dvr_probe: MDIO bus (id: 1) registration failed It's perfectly fine, and the device is successfully (and silently, as far as the console goes) probed later. Use dev_err_probe() instead, which will demote these messages to debug level (thus removing the alarming messages from the console) when the error is -EPROBE_DEFER, and also has the advantage of including the error code if/when it happens to be something other than -EPROBE_DEFER. While here, add the missing \n to one of the format strings. Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Link: https://lore.kernel.org/r/20220602074840.1143360-1-linux@rasmusvillemoes.dk Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: e23c0d21ce92 ("net: stmmac: Handle disabled MDIO busses from devicetree") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space()Nikolay Kuratov1-1/+1
[ Upstream commit 60316d7f10b17a7ebb1ead0642fee8710e1560e0 ] We need to do signed arithmetic if we expect condition `if (bytes < 0)` to be possible Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 06a8fc78367d ("VSOCK: Introduce virtio_vsock_common.ko") Signed-off-by: Nikolay Kuratov <kniv@yandex-team.ru> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20231211162317.4116625-1-kniv@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20sign-file: Fix incorrect return values checkYusong Gao1-6/+6
[ Upstream commit 829649443e78d85db0cff0c37cadb28fbb1a5f6f ] There are some wrong return values check in sign-file when call OpenSSL API. The ERR() check cond is wrong because of the program only check the return value is < 0 which ignored the return val is 0. For example: 1. CMS_final() return 1 for success or 0 for failure. 2. i2d_CMS_bio_stream() returns 1 for success or 0 for failure. 3. i2d_TYPEbio() return 1 for success and 0 for failure. 4. BIO_free() return 1 for success and 0 for failure. Link: https://www.openssl.org/docs/manmaster/man3/ Fixes: e5a2e3c84782 ("scripts/sign-file.c: Add support for signing with a raw signature") Signed-off-by: Yusong Gao <a869920004@gmail.com> Reviewed-by: Juerg Haefliger <juerg.haefliger@canonical.com> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20231213024405.624692-1-a869920004@gmail.com/ # v5 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: Remove acked SYN flag from packet in the transmit queue correctlyDong Chenchen1-0/+6
[ Upstream commit f99cd56230f56c8b6b33713c5be4da5d6766be1f ] syzkaller report: kernel BUG at net/core/skbuff.c:3452! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty #135 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452) Call Trace: icmp_glue_bits (net/ipv4/icmp.c:357) __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165) ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341) icmp_push_reply (net/ipv4/icmp.c:370) __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772) ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577) __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295) ip_output (net/ipv4/ip_output.c:427) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387) tcp_retransmit_skb (net/ipv4/tcp_output.c:3404) tcp_retransmit_timer (net/ipv4/tcp_timer.c:604) tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716) The panic issue was trigered by tcp simultaneous initiation. The initiation process is as follows: TCP A TCP B 1. CLOSED CLOSED 2. SYN-SENT --> <SEQ=100><CTL=SYN> ... 3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT 4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED 5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ... // TCP B: not send challenge ack for ack limit or packet loss // TCP A: close tcp_close tcp_send_fin if (!tskb && tcp_under_memory_pressure(sk)) tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag 6. FIN_WAIT_1 --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // TCP B: send challenge ack to SYN_FIN_ACK 7. ... <SEQ=301><ACK=101><CTL=ACK> <-- SYN-RECEIVED //challenge ack // TCP A: <SND.UNA=101> 8. FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic __tcp_retransmit_skb //skb->len=0 tcp_trim_head len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100 __pskb_trim_head skb->data_len -= len // skb->len=-1, wrap around ... ... ip_fragment icmp_glue_bits //BUG_ON If we use tcp_trim_head() to remove acked SYN from packet that contains data or other flags, skb->len will be incorrectly decremented. We can remove SYN flag that has been acked from rtx_queue earlier than tcp_trim_head(), which can fix the problem mentioned above. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Co-developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qed: Fix a potential use-after-free in qed_cxt_tables_allocDinghao Liu1-0/+1
[ Upstream commit b65d52ac9c085c0c52dee012a210d4e2f352611b ] qed_ilt_shadow_alloc() will call qed_ilt_shadow_free() to free p_hwfn->p_cxt_mngr->ilt_shadow on error. However, qed_cxt_tables_alloc() accesses the freed pointer on failure of qed_ilt_shadow_alloc() through calling qed_cxt_mngr_free(), which may lead to use-after-free. Fix this issue by setting p_mngr->ilt_shadow to NULL in qed_ilt_shadow_free(). Fixes: fe56b9e6a8d9 ("qed: Add module with basic common support") Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20231210045255.21383-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net/rose: Fix Use-After-Free in rose_ioctlHyunwoo Kim1-1/+3
[ Upstream commit 810c38a369a0a0ce625b5c12169abce1dd9ccd53 ] Because rose_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with rose_accept(). A use-after-free for skb occurs with the following flow. ``` rose_ioctl() -> skb_peek() rose_accept() -> skb_dequeue() -> kfree_skb() ``` Add sk->sk_receive_queue.lock to rose_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Link: https://lore.kernel.org/r/20231209100538.GA407321@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20atm: Fix Use-After-Free in do_vcc_ioctlHyunwoo Kim1-2/+5
[ Upstream commit 24e90b9e34f9e039f56b5f25f6e6eb92cdd8f4b3 ] Because do_vcc_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with vcc_recvmsg(). A use-after-free for skb occurs with the following flow. ``` do_vcc_ioctl() -> skb_peek() vcc_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() ``` Add sk->sk_receive_queue.lock to do_vcc_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <v4bel@theori.io> Link: https://lore.kernel.org/r/20231209094210.GA403126@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20atm: solos-pci: Fix potential deadlock on &tx_queue_lockChengfeng Ye1-2/+2
[ Upstream commit 15319a4e8ee4b098118591c6ccbd17237f841613 ] As &card->tx_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #2> pclose() --> spin_lock(&card->tx_queue_lock) <interrupt> --> solos_bh() --> fpga_tx() --> spin_lock(&card->tx_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on &card->tx_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 213e85d38912 ("solos-pci: clean up pclose() function") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20atm: solos-pci: Fix potential deadlock on &cli_queue_lockChengfeng Ye1-2/+2
[ Upstream commit d5dba32b8f6cb39be708b726044ba30dbc088b30 ] As &card->cli_queue_lock is acquired under softirq context along the following call chain from solos_bh(), other acquisition of the same lock inside process context should disable at least bh to avoid double lock. <deadlock #1> console_show() --> spin_lock(&card->cli_queue_lock) <interrupt> --> solos_bh() --> spin_lock(&card->cli_queue_lock) This flaw was found by an experimental static analysis tool I am developing for irq-related deadlock. To prevent the potential deadlock, the patch uses spin_lock_bh() on the card->cli_queue_lock under process context code consistently to prevent the possible deadlock scenario. Fixes: 9c54004ea717 ("atm: Driver for Solos PCI ADSL2+ card.") Signed-off-by: Chengfeng Ye <dg573847474@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_spi: Fix reset behaviorStefan Wahren1-1/+7
[ Upstream commit 1057812d146dd658c9a9a96d869c2551150207b5 ] In case of a reset triggered by the QCA7000 itself, the behavior of the qca_spi driver was not quite correct: - in case of a pending RX frame decoding the drop counter must be incremented and decoding state machine reseted - also the reset counter must always be incremented regardless of sync state Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-4-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Fix ethtool -G iface tx behaviorStefan Wahren1-3/+5
[ Upstream commit 96a7e861d9e04d07febd3011c30cd84cd141d81f ] After calling ethtool -g it was not possible to adjust the TX ring size again: # ethtool -g eth1 Ring parameters for eth1: Pre-set maximums: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 Current hardware settings: RX: 4 RX Mini: n/a RX Jumbo: n/a TX: 10 # ethtool -G eth1 tx 8 netlink error: Invalid argument The reason for this is that the readonly setting rx_pending get initialized and after that the range check in qcaspi_set_ringparam() fails regardless of the provided parameter. So fix this by accepting the exposed RX defaults. Instead of adding another magic number better use a new define here. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Suggested-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-3-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20qca_debug: Prevent crash on TX ring changesStefan Wahren2-5/+16
[ Upstream commit f4e6064c97c050bd9904925ff7d53d0c9954fc7b ] The qca_spi driver stop and restart the SPI kernel thread (via ndo_stop & ndo_open) in case of TX ring changes. This is a big issue because it allows userspace to prevent restart of the SPI kernel thread (via signals). A subsequent change of TX ring wrongly assume a valid spi_thread pointer which result in a crash. So prevent this by stopping the network traffic handling and temporary park the SPI thread. Fixes: 291ab06ecf67 ("net: qualcomm: new Ethernet over SPI driver for QCA7000") Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20231206141222.52029-2-wahrenst@gmx.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20net: ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIXMaciej Żenczykowski3-11/+11
[ Upstream commit bd4a816752bab609dd6d65ae021387beb9e2ddbd ] Lorenzo points out that we effectively clear all unknown flags from PIO when copying them to userspace in the netlink RTM_NEWPREFIX notification. We could fix this one at a time as new flags are defined, or in one fell swoop - I choose the latter. We could either define 6 new reserved flags (reserved1..6) and handle them individually (and rename them as new flags are defined), or we could simply copy the entire unmodified byte over - I choose the latter. This unfortunately requires some anonymous union/struct magic, so we add a static assert on the struct size for a little extra safety. Cc: David Ahern <dsahern@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Maciej Żenczykowski <maze@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-20afs: Fix refcount underflow from error handling raceDavid Howells1-1/+1
[ Upstream commit 52bf9f6c09fca8c74388cd41cc24e5d1bff812a9 ] If an AFS cell that has an unreachable (eg. ENETUNREACH) server listed (VL server or fileserver), an asynchronous probe to one of its addresses may fail immediately because sendmsg() returns an error. When this happens, a refcount underflow can happen if certain events hit a very small window. The way this occurs is: (1) There are two levels of "call" object, the afs_call and the rxrpc_call. Each of them can be transitioned to a "completed" state in the event of success or failure. (2) Asynchronous afs_calls are self-referential whilst they are active to prevent them from evaporating when they're not being processed. This reference is disposed of when the afs_call is completed. Note that an afs_call may only be completed once; once completed completing it again will do nothing. (3) When a call transmission is made, the app-side rxrpc code queues a Tx buffer for the rxrpc I/O thread to transmit. The I/O thread invokes sendmsg() to transmit it - and in the case of failure, it transitions the rxrpc_call to the completed state. (4) When an rxrpc_call is completed, the app layer is notified. In this case, the app is kafs and it schedules a work item to process events pertaining to an afs_call. (5) When the afs_call event processor is run, it goes down through the RPC-specific handler to afs_extract_data() to retrieve data from rxrpc - and, in this case, it picks up the error from the rxrpc_call and returns it. The error is then propagated to the afs_call and that is completed too. At this point the self-reference is released. (6) If the rxrpc I/O thread manages to complete the rxrpc_call within the window between rxrpc_send_data() queuing the request packet and checking for call completion on the way out, then rxrpc_kernel_send_data() will return the error from sendmsg() to the app. (7) Then afs_make_call() will see an error and will jump to the error handling path which will attempt to clean up the afs_call. (8) The problem comes when the error handling path in afs_make_call() tries to unconditionally drop an async afs_call's self-reference. This self-reference, however, may already have been dropped by afs_extract_data() completing the afs_call (9) The refcount underflows when we return to afs_do_probe_vlserver() and that tries to drop its reference on the afs_call. Fix this by making afs_make_call() attempt to complete the afs_call rather than unconditionally putting it. That way, if afs_extract_data() manages to complete the call first, afs_make_call() won't do anything. The bug can be forced by making do_udp_sendmsg() return -ENETUNREACH and sticking an msleep() in rxrpc_send_data() after the 'success:' label to widen the race window. The error message looks something like: refcount_t: underflow; use-after-free. WARNING: CPU: 3 PID: 720 at lib/refcount.c:28 refcount_warn_saturate+0xba/0x110 ... RIP: 0010:refcount_warn_saturate+0xba/0x110 ... afs_put_call+0x1dc/0x1f0 [kafs] afs_fs_get_capabilities+0x8b/0xe0 [kafs] afs_fs_probe_fileserver+0x188/0x1e0 [kafs] afs_lookup_server+0x3bf/0x3f0 [kafs] afs_alloc_server_list+0x130/0x2e0 [kafs] afs_create_volume+0x162/0x400 [kafs] afs_get_tree+0x266/0x410 [kafs] vfs_get_tree+0x25/0xc0 fc_mount+0xe/0x40 afs_d_automount+0x1b3/0x390 [kafs] __traverse_mounts+0x8f/0x210 step_into+0x340/0x760 path_openat+0x13a/0x1260 do_filp_open+0xaf/0x160 do_sys_openat2+0xaf/0x170 or something like: refcount_t: underflow; use-after-free. ... RIP: 0010:refcount_warn_saturate+0x99/0xda ... afs_put_call+0x4a/0x175 afs_send_vl_probes+0x108/0x172 afs_select_vlserver+0xd6/0x311 afs_do_cell_detect_alias+0x5e/0x1e9 afs_cell_detect_alias+0x44/0x92 afs_validate_fc+0x9d/0x134 afs_get_tree+0x20/0x2e6 vfs_get_tree+0x1d/0xc9 fc_mount+0xe/0x33 afs_d_automount+0x48/0x9d __traverse_mounts+0xe0/0x166 step_into+0x140/0x274 open_last_lookups+0x1c1/0x1df path_openat+0x138/0x1c3 do_filp_open+0x55/0xb4 do_sys_openat2+0x6c/0xb6 Fixes: 34fa47612bfe ("afs: Fix race in async call refcounting") Reported-by: Bill MacAllister <bill@ca-zephyr.org> Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1052304 Suggested-by: Jeffrey E Altman <jaltman@auristor.com> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/2633992.1702073229@warthog.procyon.org.uk/ # v1 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13Linux 5.4.264v5.4.264Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20231211182015.049134368@linuxfoundation.org Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13devcoredump: Send uevent once devcd is readyMukesh Ojha1-0/+3
[ Upstream commit af54d778a03853801d681c98c0c2a6c316ef9ca7 ] dev_coredumpm() creates a devcoredump device and adds it to the core kernel framework which eventually end up sending uevent to the user space and later creates a symbolic link to the failed device. An application running in userspace may be interested in this symbolic link to get the name of the failed device. In a issue scenario, once uevent sent to the user space it start reading '/sys/class/devcoredump/devcdX/failing_device' to get the actual name of the device which might not been created and it is in its path of creation. To fix this, suppress sending uevent till the failing device symbolic link gets created and send uevent once symbolic link is created successfully. Fixes: 833c95456a70 ("device coredump: add new device coredump class") Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1700232572-25823-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13devcoredump : Serialize devcd_del workMukesh Ojha1-2/+81
[ Upstream commit 01daccf748323dfc61112f474cf2ba81015446b0 ] In following scenario(diagram), when one thread X running dev_coredumpm() adds devcd device to the framework which sends uevent notification to userspace and another thread Y reads this uevent and call to devcd_data_write() which eventually try to delete the queued timer that is not initialized/queued yet. So, debug object reports some warning and in the meantime, timer is initialized and queued from X path. and from Y path, it gets reinitialized again and timer->entry.pprev=NULL and try_to_grab_pending() stucks. To fix this, introduce mutex and a boolean flag to serialize the behaviour. cpu0(X) cpu1(Y) dev_coredump() uevent sent to user space device_add() ======================> user space process Y reads the uevents writes to devcd fd which results into writes to devcd_data_write() mod_delayed_work() try_to_grab_pending() del_timer() debug_assert_init() INIT_DELAYED_WORK() schedule_delayed_work() debug_object_fixup() timer_fixup_assert_init() timer_setup() do_init_timer() /* Above call reinitializes the timer to timer->entry.pprev=NULL and this will be checked later in timer_pending() call. */ timer_pending() !hlist_unhashed_lockless(&timer->entry) !h->pprev /* del_timer() checks h->pprev and finds it to be NULL due to which try_to_grab_pending() stucks. */ Link: https://lore.kernel.org/lkml/2e1f81e2-428c-f11f-ce92-eb11048cb271@quicinc.com/ Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com> Link: https://lore.kernel.org/r/1663073424-13663-1-git-send-email-quic_mojha@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: af54d778a038 ("devcoredump: Send uevent once devcd is ready") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13smb: client: fix potential NULL deref in parse_dfs_referrals()Paulo Alcantara1-0/+2
[ Upstream commit 92414333eb375ed64f4ae92d34d579e826936480 ] If server returned no data for FSCTL_DFS_GET_REFERRALS, @dfs_rsp will remain NULL and then parse_dfs_referrals() will dereference it. Fix this by returning -EIO when no output data is returned. Besides, we can't fix it in SMB2_ioctl() as some FSCTLs are allowed to return no data as per MS-SMB2 2.2.32. Fixes: 9d49640a21bf ("CIFS: implement get_dfs_refer for SMB2+") Cc: stable@vger.kernel.org Reported-by: Robert Morris <rtm@csail.mit.edu> Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13cifs: Fix non-availability of dedup breaking generic/304David Howells1-1/+3
[ Upstream commit 691a41d8da4b34fe72f09393505f55f28a8f34ec ] Deduplication isn't supported on cifs, but cifs doesn't reject it, instead treating it as extent duplication/cloning. This can cause generic/304 to go silly and run for hours on end. Fix cifs to indicate EOPNOTSUPP if REMAP_FILE_DEDUP is set in ->remap_file_range(). Note that it's unclear whether or not commit b073a08016a1 is meant to cause cifs to return an error if REMAP_FILE_DEDUP. Fixes: b073a08016a1 ("cifs: fix that return -EINVAL when do dedupe operation") Cc: stable@vger.kernel.org Suggested-by: Dave Chinner <david@fromorbit.com> cc: Xiaoli Feng <fengxiaoli0714@gmail.com> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: Darrick Wong <darrick.wong@oracle.com> cc: fstests@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/3876191.1701555260@warthog.procyon.org.uk/ Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13Revert "btrfs: add dmesg output for first mount and last unmount of a ↵Greg Kroah-Hartman2-5/+1
filesystem" This reverts commit dd94ffab1b6d84b3ba9a8d09b6b0f44610d397eb which is commit 2db313205f8b96eea467691917138d646bb50aef upstream. As pointed out by many, the disk_super structure is NOT initialized before it is dereferenced in the function fs/btrfs/disk-io.c:open_ctree() that this commit adds, so something went wrong here. Revert it for now until it gets straightened out. Link: https://lore.kernel.org/r/5b0eb360-3765-40e1-854a-9da6d97eb405@roeck-us.net Link: https://lore.kernel.org/r/20231209172836.GA2154579@dev-arch.thelio-3990X Reported-by: Guenter Roeck <linux@roeck-us.net> Reported-by: Nathan Chancellor <nathan@kernel.org> Cc: Anand Jain <anand.jain@oracle.com> Cc: Qu Wenruo <wqu@suse.com> Cc: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13tools headers UAPI: Sync linux/perf_event.h with the kernel sourcesNamhyung Kim1-1/+4
commit 65ba872a6971c11ceb342c3330f059289c0e6bdb upstream. To pick the trivial change in: 119a784c81270eb8 ("perf/core: Add a new read format to get a number of lost samples") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220819003644.508916-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13drop_monitor: Require 'CAP_SYS_ADMIN' when joining "events" groupIdo Schimmel3-1/+8
commit e03781879a0d524ce3126678d50a80484a513c4b upstream. The "NET_DM" generic netlink family notifies drop locations over the "events" multicast group. This is problematic since by default generic netlink allows non-root users to listen to these notifications. Fix by adding a new field to the generic netlink multicast group structure that when set prevents non-root users or root without the 'CAP_SYS_ADMIN' capability (in the user namespace owning the network namespace) from joining the group. Set this field for the "events" group. Use 'CAP_SYS_ADMIN' rather than 'CAP_NET_ADMIN' because of the nature of the information that is shared over this group. Note that the capability check in this case will always be performed against the initial user namespace since the family is not netns aware and only operates in the initial network namespace. A new field is added to the structure rather than using the "flags" field because the existing field uses uAPI flags and it is inappropriate to add a new uAPI flag for an internal kernel check. In net-next we can rework the "flags" field to use internal flags and fold the new field into it. But for now, in order to reduce the amount of changes, add a new field. Since the information can only be consumed by root, mark the control plane operations that start and stop the tracing as root-only using the 'GENL_ADMIN_PERM' flag. Tested using [1]. Before: # capsh -- -c ./dm_repo # capsh --drop=cap_sys_admin -- -c ./dm_repo After: # capsh -- -c ./dm_repo # capsh --drop=cap_sys_admin -- -c ./dm_repo Failed to join "events" multicast group [1] $ cat dm.c #include <stdio.h> #include <netlink/genl/ctrl.h> #include <netlink/genl/genl.h> #include <netlink/socket.h> int main(int argc, char **argv) { struct nl_sock *sk; int grp, err; sk = nl_socket_alloc(); if (!sk) { fprintf(stderr, "Failed to allocate socket\n"); return -1; } err = genl_connect(sk); if (err) { fprintf(stderr, "Failed to connect socket\n"); return err; } grp = genl_ctrl_resolve_grp(sk, "NET_DM", "events"); if (grp < 0) { fprintf(stderr, "Failed to resolve \"events\" multicast group\n"); return grp; } err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE); if (err) { fprintf(stderr, "Failed to join \"events\" multicast group\n"); return err; } return 0; } $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o dm_repo dm.c Fixes: 9a8afc8d3962 ("Network Drop Monitor: Adding drop monitor implementation & Netlink protocol") Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231206213102.1824398-3-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-12-13psample: Require 'CAP_NET_ADMIN' when joining "packets" groupIdo Schimmel1-1/+2
commit 44ec98ea5ea9cfecd31a5c4cc124703cb5442832 upstream. The "psample" generic netlink family notifies sampled packets over the "packets" multicast group. This is problematic since by default generic netlink allows non-root users to listen to these notifications. Fix by marking the group with the 'GENL_UNS_ADMIN_PERM' flag. This will prevent non-root users or root without the 'CAP_NET_ADMIN' capability (in the user namespace owning the network namespace) from joining the group. Tested using [1]. Before: # capsh -- -c ./psample_repo # capsh --drop=cap_net_admin -- -c ./psample_repo After: # capsh -- -c ./psample_repo # capsh --drop=cap_net_admin -- -c ./psample_repo Failed to join "packets" multicast group [1] $ cat psample.c #include <stdio.h> #include <netlink/genl/ctrl.h> #include <netlink/genl/genl.h> #include <netlink/socket.h> int join_grp(struct nl_sock *sk, const char *grp_name) { int grp, err; grp = genl_ctrl_resolve_grp(sk, "psample", grp_name); if (grp < 0) { fprintf(stderr, "Failed to resolve \"%s\" multicast group\n", grp_name); return grp; } err = nl_socket_add_memberships(sk, grp, NFNLGRP_NONE); if (err) { fprintf(stderr, "Failed to join \"%s\" multicast group\n", grp_name); return err; } return 0; } int main(int argc, char **argv) { struct nl_sock *sk; int err; sk = nl_socket_alloc(); if (!sk) { fprintf(stderr, "Failed to allocate socket\n"); return -1; } err = genl_connect(sk); if (err) { fprintf(stderr, "Failed to connect socket\n"); return err; } err = join_grp(sk, "config"); if (err) return err; err = join_grp(sk, "packets"); if (err) return err; return 0; } $ gcc -I/usr/include/libnl3 -lnl-3 -lnl-genl-3 -o psample_repo psample.c Fixes: 6ae0a6286171 ("net: Introduce psample, a new genetlink channel for packet sampling") Reported-by: "The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20231206213102.1824398-2-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-11 00:05:59 +0300