summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-01-18Linux 5.4.229v5.4.229Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20230116154909.645460653@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Link: https://lore.kernel.org/r/20230117124648.308618956@linuxfoundation.org Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18tipc: call tipc_lxc_xmit without holding node_read_lockXin Long1-3/+9
commit 88956177db179e4eba7cd590971961857d1565b8 upstream. When sending packets between nodes in netns, it calls tipc_lxc_xmit() for peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv() might be called, and it's pretty much like in tipc_rcv(). Currently the local 'node rw lock' is held during calling tipc_lxc_xmit() to protect the peer_net not being freed by another thread. However, when receiving these packets, tipc_node_add_conn() might be called where the peer 'node rw lock' is acquired. Then a dead lock warning is triggered by lockdep detector, although it is not a real dead lock: WARNING: possible recursive locking detected -------------------------------------------- conn_server/1086 is trying to acquire lock: ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] but task is already holding lock: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&n->lock#2); lock(&n->lock#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by conn_server/1086: #0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \ at: tipc_accept+0x9c0/0x10b0 [tipc] #1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \ at: tipc_accept+0x363/0x10b0 [tipc] #2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] #3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \ at: tipc_sk_rcv+0x2da/0x1b40 [tipc] Call Trace: <TASK> dump_stack_lvl+0x44/0x5b __lock_acquire.cold.77+0x1f2/0x3d7 lock_acquire+0x1d2/0x610 _raw_write_lock_bh+0x38/0x80 tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] tipc_sk_finish_conn+0x21e/0x640 [tipc] tipc_sk_filter_rcv+0x147b/0x3030 [tipc] tipc_sk_rcv+0xbb4/0x1b40 [tipc] tipc_lxc_xmit+0x225/0x26b [tipc] tipc_node_xmit.cold.82+0x4a/0x102 [tipc] __tipc_sendstream+0x879/0xff0 [tipc] tipc_accept+0x966/0x10b0 [tipc] do_accept+0x37d/0x590 This patch avoids this warning by not holding the 'node rw lock' before calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock() should be enough, as in cleanup_net() when freeing the netns, it calls synchronize_rcu() before the free is continued. Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes sense to call it under rcu_read_lock(). Note that the right lock order must be: rcu_read_lock(); tipc_node_read_lock(n); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); instead of: tipc_node_read_lock(n); rcu_read_lock(); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); and we have to call tipc_node_read_lock/unlock() twice in tipc_node_xmit(). Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18ocfs2: fix freeing uninitialized resource on ocfs2_dlm_shutdownHeming Zhao2-5/+6
commit 550842cc60987b269e31b222283ade3e1b6c7fc8 upstream. After commit 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job before return error"), any procedure after ocfs2_dlm_init() fails will trigger crash when calling ocfs2_dlm_shutdown(). ie: On local mount mode, no dlm resource is initialized. If ocfs2_mount_volume() fails in ocfs2_find_slot(), error handling will call ocfs2_dlm_shutdown(), then does dlm resource cleanup job, which will trigger kernel crash. This solution should bypass uninitialized resources in ocfs2_dlm_shutdown(). Link: https://lkml.kernel.org/r/20220815085754.20417-1-heming.zhao@suse.com Fixes: 0737e01de9c4 ("ocfs2: ocfs2_mount_volume does cleanup job before return error") Signed-off-by: Heming Zhao <heming.zhao@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18tipc: Add a missing case of TIPC_DIRECT_MSG typeHoang Le3-2/+8
commit 8b1e5b0a99f04bda2d6c85ecfe5e68a356c10914 upstream. In the commit f73b12812a3d ("tipc: improve throughput between nodes in netns"), we're missing a check to handle TIPC_DIRECT_MSG type, it's still using old sending mechanism for this message type. So, throughput improvement is not significant as expected. Besides that, when sending a large message with that type, we're also handle wrong receiving queue, it should be enqueued in socket receiving instead of multicast messages. Fix this by adding the missing case for TIPC_DIRECT_MSG. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Reported-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18tty: serial: tegra: Handle RX transfer in PIO mode if DMA wasn't startedDmitry Osipenko1-19/+16
commit 1f69a1273b3f204a9c00dc3bbdcc4afcd0787428 upstream. It is possible to get an instant RX timeout or end-of-transfer interrupt before RX DMA was started, if transaction is less than 16 bytes. Transfer should be handled in PIO mode in this case because DMA can't handle it. This patch brings back the original behaviour of the driver that was changed by accident by a previous commit, it fixes occasional Bluetooth HW initialization failures which I started to notice recently. Fixes: d5e3fadb7012 ("tty: serial: tegra: Activate RX DMA transfer by request") Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200209164415.9632-1-digetx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18tipc: fix use-after-free in tipc_disc_rcv()Tuong Lien1-3/+3
commit 31e4ccc99eda8a5a7e6902c98bee6e78ffd3edb9 upstream. In the function 'tipc_disc_rcv()', the 'msg_peer_net_hash()' is called to read the header data field but after the message skb has been freed, that might result in a garbage value... This commit fixes it by defining a new local variable to store the data first, just like the other header fields' handling. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18Revert "usb: ulpi: defer ulpi_register on ulpi_read_id timeout"Ferry Toth1-1/+1
commit b659b613cea2ae39746ca8bd2b69d1985dd9d770 upstream. This reverts commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac. This patch results in some qemu test failures, specifically xilinx-zynq-a9 machine and zynq-zc702 as well as zynq-zed devicetree files, when trying to boot from USB drive. Link: https://lore.kernel.org/lkml/20221220194334.GA942039@roeck-us.net/ Fixes: 8a7b31d545d3 ("usb: ulpi: defer ulpi_register on ulpi_read_id timeout") Cc: stable@vger.kernel.org Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221222205302.45761-1-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18mm: Always release pages to the buddy allocator in memblock_free_late().Aaron Thompson1-1/+7
commit 115d9d77bb0f9152c60b6e8646369fa7f6167593 upstream. If CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, memblock_free_pages() only releases pages to the buddy allocator if they are not in the deferred range. This is correct for free pages (as defined by for_each_free_mem_pfn_range_in_zone()) because free pages in the deferred range will be initialized and released as part of the deferred init process. memblock_free_pages() is called by memblock_free_late(), which is used to free reserved ranges after memblock_free_all() has run. All pages in reserved ranges have been initialized at that point, and accordingly, those pages are not touched by the deferred init process. This means that currently, if the pages that memblock_free_late() intends to release are in the deferred range, they will never be released to the buddy allocator. They will forever be reserved. In addition, memblock_free_pages() calls kmsan_memblock_free_pages(), which is also correct for free pages but is not correct for reserved pages. KMSAN metadata for reserved pages is initialized by kmsan_init_shadow(), which runs shortly before memblock_free_all(). For both of these reasons, memblock_free_pages() should only be called for free pages, and memblock_free_late() should call __free_pages_core() directly instead. One case where this issue can occur in the wild is EFI boot on x86_64. The x86 EFI code reserves all EFI boot services memory ranges via memblock_reserve() and frees them later via memblock_free_late() (efi_reserve_boot_services() and efi_free_boot_services(), respectively). If any of those ranges happens to fall within the deferred init range, the pages will not be released and that memory will be unavailable. For example, on an Amazon EC2 t3.micro VM (1 GB) booting via EFI: v6.2-rc2: # grep -E 'Node|spanned|present|managed' /proc/zoneinfo Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 178867 v6.2-rc2 + patch: # grep -E 'Node|spanned|present|managed' /proc/zoneinfo Node 0, zone DMA spanned 4095 present 3999 managed 3840 Node 0, zone DMA32 spanned 246652 present 245868 managed 222816 # +43,949 pages Fixes: 3a80a7fa7989 ("mm: meminit: initialise a subset of struct pages if CONFIG_DEFERRED_STRUCT_PAGE_INIT is set") Signed-off-by: Aaron Thompson <dev@aaront.org> Link: https://lore.kernel.org/r/01010185892de53e-e379acfb-7044-4b24-b30a-e2657c1ba989-000000@us-west-2.amazonses.com Signed-off-by: Mike Rapoport (IBM) <rppt@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18efi: fix NULL-deref in init error pathJohan Hovold1-3/+6
[ Upstream commit 703c13fe3c9af557d312f5895ed6a5fda2711104 ] In cases where runtime services are not supported or have been disabled, the runtime services workqueue will never have been allocated. Do not try to destroy the workqueue unconditionally in the unlikely event that EFI initialisation fails to avoid dereferencing a NULL pointer. Fixes: 98086df8b70c ("efi: add missed destroy_workqueue when efisubsys_init fails") Cc: stable@vger.kernel.org Cc: Li Heng <liheng40@huawei.com> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18arm64: cmpxchg_double*: hazard against entire exchange variableMark Rutland2-2/+2
[ Upstream commit 031af50045ea97ed4386eb3751ca2c134d0fc911 ] The inline assembly for arm64's cmpxchg_double*() implementations use a +Q constraint to hazard against other accesses to the memory location being exchanged. However, the pointer passed to the constraint is a pointer to unsigned long, and thus the hazard only applies to the first 8 bytes of the location. GCC can take advantage of this, assuming that other portions of the location are unchanged, leading to a number of potential problems. This is similar to what we fixed back in commit: fee960bed5e857eb ("arm64: xchg: hazard against entire exchange variable") ... but we forgot to adjust cmpxchg_double*() similarly at the same time. The same problem applies, as demonstrated with the following test: | struct big { | u64 lo, hi; | } __aligned(128); | | unsigned long foo(struct big *b) | { | u64 hi_old, hi_new; | | hi_old = b->hi; | cmpxchg_double_local(&b->lo, &b->hi, 0x12, 0x34, 0x56, 0x78); | hi_new = b->hi; | | return hi_old ^ hi_new; | } ... which GCC 12.1.0 compiles as: | 0000000000000000 <foo>: | 0: d503233f paciasp | 4: aa0003e4 mov x4, x0 | 8: 1400000e b 40 <foo+0x40> | c: d2800240 mov x0, #0x12 // #18 | 10: d2800681 mov x1, #0x34 // #52 | 14: aa0003e5 mov x5, x0 | 18: aa0103e6 mov x6, x1 | 1c: d2800ac2 mov x2, #0x56 // #86 | 20: d2800f03 mov x3, #0x78 // #120 | 24: 48207c82 casp x0, x1, x2, x3, [x4] | 28: ca050000 eor x0, x0, x5 | 2c: ca060021 eor x1, x1, x6 | 30: aa010000 orr x0, x0, x1 | 34: d2800000 mov x0, #0x0 // #0 <--- BANG | 38: d50323bf autiasp | 3c: d65f03c0 ret | 40: d2800240 mov x0, #0x12 // #18 | 44: d2800681 mov x1, #0x34 // #52 | 48: d2800ac2 mov x2, #0x56 // #86 | 4c: d2800f03 mov x3, #0x78 // #120 | 50: f9800091 prfm pstl1strm, [x4] | 54: c87f1885 ldxp x5, x6, [x4] | 58: ca0000a5 eor x5, x5, x0 | 5c: ca0100c6 eor x6, x6, x1 | 60: aa0600a6 orr x6, x5, x6 | 64: b5000066 cbnz x6, 70 <foo+0x70> | 68: c8250c82 stxp w5, x2, x3, [x4] | 6c: 35ffff45 cbnz w5, 54 <foo+0x54> | 70: d2800000 mov x0, #0x0 // #0 <--- BANG | 74: d50323bf autiasp | 78: d65f03c0 ret Notice that at the lines with "BANG" comments, GCC has assumed that the higher 8 bytes are unchanged by the cmpxchg_double() call, and that `hi_old ^ hi_new` can be reduced to a constant zero, for both LSE and LL/SC versions of cmpxchg_double(). This patch fixes the issue by passing a pointer to __uint128_t into the +Q constraint, ensuring that the compiler hazards against the entire 16 bytes being modified. With this change, GCC 12.1.0 compiles the above test as: | 0000000000000000 <foo>: | 0: f9400407 ldr x7, [x0, #8] | 4: d503233f paciasp | 8: aa0003e4 mov x4, x0 | c: 1400000f b 48 <foo+0x48> | 10: d2800240 mov x0, #0x12 // #18 | 14: d2800681 mov x1, #0x34 // #52 | 18: aa0003e5 mov x5, x0 | 1c: aa0103e6 mov x6, x1 | 20: d2800ac2 mov x2, #0x56 // #86 | 24: d2800f03 mov x3, #0x78 // #120 | 28: 48207c82 casp x0, x1, x2, x3, [x4] | 2c: ca050000 eor x0, x0, x5 | 30: ca060021 eor x1, x1, x6 | 34: aa010000 orr x0, x0, x1 | 38: f9400480 ldr x0, [x4, #8] | 3c: d50323bf autiasp | 40: ca0000e0 eor x0, x7, x0 | 44: d65f03c0 ret | 48: d2800240 mov x0, #0x12 // #18 | 4c: d2800681 mov x1, #0x34 // #52 | 50: d2800ac2 mov x2, #0x56 // #86 | 54: d2800f03 mov x3, #0x78 // #120 | 58: f9800091 prfm pstl1strm, [x4] | 5c: c87f1885 ldxp x5, x6, [x4] | 60: ca0000a5 eor x5, x5, x0 | 64: ca0100c6 eor x6, x6, x1 | 68: aa0600a6 orr x6, x5, x6 | 6c: b5000066 cbnz x6, 78 <foo+0x78> | 70: c8250c82 stxp w5, x2, x3, [x4] | 74: 35ffff45 cbnz w5, 5c <foo+0x5c> | 78: f9400480 ldr x0, [x4, #8] | 7c: d50323bf autiasp | 80: ca0000e0 eor x0, x7, x0 | 84: d65f03c0 ret ... sampling the high 8 bytes before and after the cmpxchg, and performing an EOR, as we'd expect. For backporting, I've tested this atop linux-4.9.y with GCC 5.5.0. Note that linux-4.9.y is oldest currently supported stable release, and mandates GCC 5.1+. Unfortunately I couldn't get a GCC 5.1 binary to run on my machines due to library incompatibilities. I've also used a standalone test to check that we can use a __uint128_t pointer in a +Q constraint at least as far back as GCC 4.8.5 and LLVM 3.9.1. Fixes: 5284e1b4bc8a ("arm64: xchg: Implement cmpxchg_double") Fixes: e9a4b795652f ("arm64: cmpxchg_dbl: patch in lse instructions when supported by the CPU") Reported-by: Boqun Feng <boqun.feng@gmail.com> Link: https://lore.kernel.org/lkml/Y6DEfQXymYVgL3oJ@boqun-archlinux/ Reported-by: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/lkml/Y6GXoO4qmH9OIZ5Q@hirez.programming.kicks-ass.net/ Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20230104151626.3262137-1-mark.rutland@arm.com Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18arm64: atomics: remove LL/SC trampolinesMark Rutland1-31/+9
[ Upstream commit b2c3ccbd0011bb3b51d0fec24cb3a5812b1ec8ea ] When CONFIG_ARM64_LSE_ATOMICS=y, each use of an LL/SC atomic results in a fragment of code being generated in a subsection without a clear association with its caller. A trampoline in the caller branches to the LL/SC atomic with with a direct branch, and the atomic directly branches back into its trampoline. This breaks backtracing, as any PC within the out-of-line fragment will be symbolized as an offset from the nearest prior symbol (which may not be the function using the atomic), and since the atomic returns with a direct branch, the caller's PC may be missing from the backtrace. For example, with secondary_start_kernel() hacked to contain atomic_inc(NULL), the resulting exception can be reported as being taken from cpus_are_stuck_in_kernel(): | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 | Mem abort info: | ESR = 0x0000000096000004 | EC = 0x25: DABT (current EL), IL = 32 bits | SET = 0, FnV = 0 | EA = 0, S1PTW = 0 | FSC = 0x04: level 0 translation fault | Data abort info: | ISV = 0, ISS = 0x00000004 | CM = 0, WnR = 0 | [0000000000000000] user address but active_mm is swapper | Internal error: Oops: 96000004 [#1] PREEMPT SMP | Modules linked in: | CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.19.0-11219-geb555cb5b794-dirty #3 | Hardware name: linux,dummy-virt (DT) | pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) | pc : cpus_are_stuck_in_kernel+0xa4/0x120 | lr : secondary_start_kernel+0x164/0x170 | sp : ffff80000a4cbe90 | x29: ffff80000a4cbe90 x28: 0000000000000000 x27: 0000000000000000 | x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 | x23: 0000000000000000 x22: 0000000000000000 x21: 0000000000000000 | x20: 0000000000000001 x19: 0000000000000001 x18: 0000000000000008 | x17: 3030383832343030 x16: 3030303030307830 x15: ffff80000a4cbab0 | x14: 0000000000000001 x13: 5d31666130663133 x12: 3478305b20313030 | x11: 3030303030303078 x10: 3020726f73736563 x9 : 726f737365636f72 | x8 : ffff800009ff2ef0 x7 : 0000000000000003 x6 : 0000000000000000 | x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000100 | x2 : 0000000000000000 x1 : ffff0000029bd880 x0 : 0000000000000000 | Call trace: | cpus_are_stuck_in_kernel+0xa4/0x120 | __secondary_switched+0xb0/0xb4 | Code: 35ffffa3 17fffc6c d53cd040 f9800011 (885f7c01) | ---[ end trace 0000000000000000 ]--- This is confusing and hinders debugging, and will be problematic for CONFIG_LIVEPATCH as these cases cannot be unwound reliably. This is very similar to recent issues with out-of-line exception fixups, which were removed in commits: 35d67794b8828333 ("arm64: lib: __arch_clear_user(): fold fixups into body") 4012e0e22739eef9 ("arm64: lib: __arch_copy_from_user(): fold fixups into body") 139f9ab73d60cf76 ("arm64: lib: __arch_copy_to_user(): fold fixups into body") When the trampolines were introduced in commit: addfc38672c73efd ("arm64: atomics: avoid out-of-line ll/sc atomics") The rationale was to improve icache performance by grouping the LL/SC atomics together. This has never been measured, and this theoretical benefit is outweighed by other factors: * As the subsections are collapsed into sections at object file granularity, these are spread out throughout the kernel and can share cachelines with unrelated code regardless. * GCC 12.1.0 has been observed to place the trampoline out-of-line in specialised __ll_sc_*() functions, introducing more branching than was intended. * Removing the trampolines has been observed to shrink a defconfig kernel Image by 64KiB when building with GCC 12.1.0. This patch removes the LL/SC trampolines, meaning that the LL/SC atomics will be inlined into their callers (or placed in out-of line functions using regular BL/RET pairs). When CONFIG_ARM64_LSE_ATOMICS=y, the LL/SC atomics are always called in an unlikely branch, and will be placed in a cold portion of the function, so this should have minimal impact to the hot paths. Other than the improved backtracing, there should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20220817155914.3975112-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18arm64: atomics: format whitespace consistentlyMark Rutland2-50/+50
[ Upstream commit 8e6082e94aac6d0338883b5953631b662a5a9188 ] The code for the atomic ops is formatted inconsistently, and while this is not a functional problem it is rather distracting when working on them. Some have ops have consistent indentation, e.g. | #define ATOMIC_OP_ADD_RETURN(name, mb, cl...) \ | static inline int __lse_atomic_add_return##name(int i, atomic_t *v) \ | { \ | u32 tmp; \ | \ | asm volatile( \ | __LSE_PREAMBLE \ | " ldadd" #mb " %w[i], %w[tmp], %[v]\n" \ | " add %w[i], %w[i], %w[tmp]" \ | : [i] "+r" (i), [v] "+Q" (v->counter), [tmp] "=&r" (tmp) \ | : "r" (v) \ | : cl); \ | \ | return i; \ | } While others have negative indentation for some lines, and/or have misaligned trailing backslashes, e.g. | static inline void __lse_atomic_##op(int i, atomic_t *v) \ | { \ | asm volatile( \ | __LSE_PREAMBLE \ | " " #asm_op " %w[i], %[v]\n" \ | : [i] "+r" (i), [v] "+Q" (v->counter) \ | : "r" (v)); \ | } This patch makes the indentation consistent and also aligns the trailing backslashes. This makes the code easier to read for those (like myself) who are easily distracted by these inconsistencies. This is intended as a cleanup. There should be no functional change as a result of this patch. Signed-off-by: Mark Rutland <mark.rutland@arm.com> Cc: Boqun Feng <boqun.feng@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20211210151410.2782645-2-mark.rutland@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Stable-dep-of: 031af50045ea ("arm64: cmpxchg_double*: hazard against entire exchange variable") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18drm/virtio: Fix GEM handle creation UAFRob Clark1-1/+9
[ Upstream commit 52531258318ed59a2dc5a43df2eaf0eb1d65438e ] Userspace can guess the handle value and try to race GEM object creation with handle close, resulting in a use-after-free if we dereference the object after dropping the handle's reference. For that reason, dropping the handle's reference must be done *after* we are done dereferencing the object. Signed-off-by: Rob Clark <robdclark@chromium.org> Reviewed-by: Chia-I Wu <olvaffe@gmail.com> Fixes: 62fb7a5e1096 ("virtio-gpu: add 3d/virgl support") Cc: stable@vger.kernel.org Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221216233355.542197-2-robdclark@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18x86/resctrl: Fix task CLOSID/RMID update racePeter Newman1-1/+11
[ Upstream commit fe1f0714385fbcf76b0cbceb02b7277d842014fc ] When the user moves a running task to a new rdtgroup using the task's file interface or by deleting its rdtgroup, the resulting change in CLOSID/RMID must be immediately propagated to the PQR_ASSOC MSR on the task(s) CPUs. x86 allows reordering loads with prior stores, so if the task starts running between a task_curr() check that the CPU hoisted before the stores in the CLOSID/RMID update then it can start running with the old CLOSID/RMID until it is switched again because __rdtgroup_move_task() failed to determine that it needs to be interrupted to obtain the new CLOSID/RMID. Refer to the diagram below: CPU 0 CPU 1 ----- ----- __rdtgroup_move_task(): curr <- t1->cpu->rq->curr __schedule(): rq->curr <- t1 resctrl_sched_in(): t1->{closid,rmid} -> {1,1} t1->{closid,rmid} <- {2,2} if (curr == t1) // false IPI(t1->cpu) A similar race impacts rdt_move_group_tasks(), which updates tasks in a deleted rdtgroup. In both cases, use smp_mb() to order the task_struct::{closid,rmid} stores before the loads in task_curr(). In particular, in the rdt_move_group_tasks() case, simply execute an smp_mb() on every iteration with a matching task. It is possible to use a single smp_mb() in rdt_move_group_tasks(), but this would require two passes and a means of remembering which task_structs were updated in the first loop. However, benchmarking results below showed too little performance impact in the simple approach to justify implementing the two-pass approach. Times below were collected using `perf stat` to measure the time to remove a group containing a 1600-task, parallel workload. CPU: Intel(R) Xeon(R) Platinum P-8136 CPU @ 2.00GHz (112 threads) # mkdir /sys/fs/resctrl/test # echo $$ > /sys/fs/resctrl/test/tasks # perf bench sched messaging -g 40 -l 100000 task-clock time ranges collected using: # perf stat rmdir /sys/fs/resctrl/test Baseline: 1.54 - 1.60 ms smp_mb() every matching task: 1.57 - 1.67 ms [ bp: Massage commit message. ] Fixes: ae28d1aae48a ("x86/resctrl: Use an IPI instead of task_work_add() to update PQR_ASSOC MSR") Fixes: 0efc89be9471 ("x86/intel_rdt: Update task closid immediately on CPU in rmdir and unmount") Signed-off-by: Peter Newman <peternewman@google.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Reviewed-by: Reinette Chatre <reinette.chatre@intel.com> Reviewed-by: Babu Moger <babu.moger@amd.com> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20221220161123.432120-1-peternewman@google.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18x86/resctrl: Use task_curr() instead of task_struct->on_cpu to prevent ↵Reinette Chatre1-9/+5
unnecessary IPI [ Upstream commit e0ad6dc8969f790f14bddcfd7ea284b7e5f88a16 ] James reported in [1] that there could be two tasks running on the same CPU with task_struct->on_cpu set. Using task_struct->on_cpu as a test if a task is running on a CPU may thus match the old task for a CPU while the scheduler is running and IPI it unnecessarily. task_curr() is the correct helper to use. While doing so move the #ifdef check of the CONFIG_SMP symbol to be a C conditional used to determine if this helper should be used to ensure the code is always checked for correctness by the compiler. [1] https://lore.kernel.org/lkml/a782d2f3-d2f6-795f-f4b1-9462205fd581@arm.com Reported-by: James Morse <james.morse@arm.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lkml.kernel.org/r/e9e68ce1441a73401e08b641cc3b9a3cf13fe6d4.1608243147.git.reinette.chatre@intel.com Stable-dep-of: fe1f0714385f ("x86/resctrl: Fix task CLOSID/RMID update race") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()Christophe JAILLET1-1/+3
[ Upstream commit 142e821f68cf5da79ce722cb9c1323afae30e185 ] A clk, prepared and enabled in mtk_iommu_v1_hw_init(), is not released in the error handling path of mtk_iommu_v1_probe(). Add the corresponding clk_disable_unprepare(), as already done in the remove function. Fixes: b17336c55d89 ("iommu/mediatek: add support for mtk iommu generation one HW") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Yong Wu <yong.wu@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/593e7b7d97c6e064b29716b091a9d4fd122241fb.1671473163.git.christophe.jaillet@wanadoo.fr Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18iommu/mediatek-v1: Add error handle for mtk_iommu_probeYong Wu1-4/+18
[ Upstream commit ac304c070c54413efabf29f9e73c54576d329774 ] In the original code, we lack the error handle. This patch adds them. Signed-off-by: Yong Wu <yong.wu@mediatek.com> Link: https://lore.kernel.org/r/20210412064843.11614-2-yong.wu@mediatek.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Stable-dep-of: 142e821f68cf ("iommu/mediatek-v1: Fix an error handling path in mtk_iommu_v1_probe()") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18net/mlx5: Fix ptp max frequency adjustment rangeRahul Rameshbabu1-1/+1
[ Upstream commit fe91d57277eef8bb4aca05acfa337b4a51d0bba4 ] .max_adj of ptp_clock_info acts as an absolute value for the amount in ppb that can be set for a single call of .adjfine. This means that a single call to .getfine cannot be greater than .max_adj or less than -(.max_adj). Provides correct value for max frequency adjustment value supported by devices. Fixes: 3d8c38af1493 ("net/mlx5e: Add PTP Hardware Clock (PHC) support") Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18net/mlx5: Rename ptp clock infoEran Ben Elisha1-1/+1
[ Upstream commit aac2df7f022eccb5d117f07b1e231410db1a863a ] Fix a typo in ptp_clock_info naming: mlx5_p2p -> mlx5_ptp. Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Stable-dep-of: fe91d57277ee ("net/mlx5: Fix ptp max frequency adjustment range") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18net/sched: act_mpls: Fix warning during failed attribute validationIdo Schimmel1-1/+7
[ Upstream commit 9e17f99220d111ea031b44153fdfe364b0024ff2 ] The 'TCA_MPLS_LABEL' attribute is of 'NLA_U32' type, but has a validation type of 'NLA_VALIDATE_FUNCTION'. This is an invalid combination according to the comment above 'struct nla_policy': " Meaning of `validate' field, use via NLA_POLICY_VALIDATE_FN: NLA_BINARY Validation function called for the attribute. All other Unused - but note that it's a union " This can trigger the warning [1] in nla_get_range_unsigned() when validation of the attribute fails. Despite being of 'NLA_U32' type, the associated 'min'/'max' fields in the policy are negative as they are aliased by the 'validate' field. Fix by changing the attribute type to 'NLA_BINARY' which is consistent with the above comment and all other users of NLA_POLICY_VALIDATE_FN(). As a result, move the length validation to the validation function. No regressions in MPLS tests: # ./tdc.py -f tc-tests/actions/mpls.json [...] # echo $? 0 [1] WARNING: CPU: 0 PID: 17743 at lib/nlattr.c:118 nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 Modules linked in: CPU: 0 PID: 17743 Comm: syz-executor.0 Not tainted 6.1.0-rc8 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:nla_get_range_unsigned+0x1d8/0x1e0 lib/nlattr.c:117 [...] Call Trace: <TASK> __netlink_policy_dump_write_attr+0x23d/0x990 net/netlink/policy.c:310 netlink_policy_dump_write_attr+0x22/0x30 net/netlink/policy.c:411 netlink_ack_tlv_fill net/netlink/af_netlink.c:2454 [inline] netlink_ack+0x546/0x760 net/netlink/af_netlink.c:2506 netlink_rcv_skb+0x1b7/0x240 net/netlink/af_netlink.c:2546 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:6109 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2482 ___sys_sendmsg net/socket.c:2536 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2565 __do_sys_sendmsg net/socket.c:2574 [inline] __se_sys_sendmsg net/socket.c:2572 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2572 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://lore.kernel.org/netdev/CAO4mrfdmjvRUNbDyP0R03_DrD_eFCLCguz6OxZ2TYRSv0K9gxA@mail.gmail.com/ Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Reported-by: Wei Chen <harperchen1110@gmail.com> Tested-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230107171004.608436-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18nfc: pn533: Wait for out_urb's completion in pn533_usb_send_frame()Minsuk Kang1-3/+41
[ Upstream commit 9dab880d675b9d0dd56c6428e4e8352a3339371d ] Fix a use-after-free that occurs in hcd when in_urb sent from pn533_usb_send_frame() is completed earlier than out_urb. Its callback frees the skb data in pn533_send_async_complete() that is used as a transfer buffer of out_urb. Wait before sending in_urb until the callback of out_urb is called. To modify the callback of out_urb alone, separate the complete function of out_urb and ack_urb. Found by a modified version of syzkaller. BUG: KASAN: use-after-free in dummy_timer Call Trace: memcpy (mm/kasan/shadow.c:65) dummy_perform_transfer (drivers/usb/gadget/udc/dummy_hcd.c:1352) transfer (drivers/usb/gadget/udc/dummy_hcd.c:1453) dummy_timer (drivers/usb/gadget/udc/dummy_hcd.c:1972) arch_static_branch (arch/x86/include/asm/jump_label.h:27) static_key_false (include/linux/jump_label.h:207) timer_expire_exit (include/trace/events/timer.h:127) call_timer_fn (kernel/time/timer.c:1475) expire_timers (kernel/time/timer.c:1519) __run_timers (kernel/time/timer.c:1790) run_timer_softirq (kernel/time/timer.c:1803) Fixes: c46ee38620a2 ("NFC: pn533: add NXP pn533 nfc device driver") Signed-off-by: Minsuk Kang <linuxlovemin@yonsei.ac.kr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18hvc/xen: lock console list traversalRoger Pau Monne1-17/+29
[ Upstream commit c0dccad87cf68fc6012aec7567e354353097ec1a ] The currently lockless access to the xen console list in vtermno_to_xencons() is incorrect, as additions and removals from the list can happen anytime, and as such the traversal of the list to get the private console data for a given termno needs to happen with the lock held. Note users that modify the list already do so with the lock taken. Adjust current lock takers to use the _irq{save,restore} helpers, since the context in which vtermno_to_xencons() is called can have interrupts disabled. Use the _irq{save,restore} set of helpers to switch the current callers to disable interrupts in the locked region. I haven't checked if existing users could instead use the _irq variant, as I think it's safer to use _irq{save,restore} upfront. While there switch from using list_for_each_entry_safe to list_for_each_entry: the current entry cursor won't be removed as part of the code in the loop body, so using the _safe variant is pointless. Fixes: 02e19f9c7cac ('hvc_xen: implement multiconsole support') Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/20221130163611.14686-1-roger.pau@citrix.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18tipc: fix unexpected link reset due to discovery messagesTung Nguyen1-4/+8
[ Upstream commit c244c092f1ed2acfb5af3d3da81e22367d3dd733 ] This unexpected behavior is observed: node 1 | node 2 ------ | ------ link is established | link is established reboot | link is reset up | send discovery message receive discovery message | link is established | link is established send discovery message | | receive discovery message | link is reset (unexpected) | send reset message link is reset | It is due to delayed re-discovery as described in function tipc_node_check_dest(): "this link endpoint has already reset and re-established contact with the peer, before receiving a discovery message from that node." However, commit 598411d70f85 has changed the condition for calling tipc_node_link_down() which was the acceptance of new media address. This commit fixes this by restoring the old and correct behavior. Fixes: 598411d70f85 ("tipc: make resetting of links non-atomic") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18tipc: eliminate checking netns if node establishedHoang Le1-9/+5
[ Upstream commit d408bef4bfa60bac665b6e7239269570039a968b ] Currently, we scan over all network namespaces at each received discovery message in order to check if the sending peer might be present in a host local namespaces. This is unnecessary since we can assume that a peer will not change its location during an established session. We now improve the condition for this testing so that we don't perform any redundant scans. Fixes: f73b12812a3d ("tipc: improve throughput between nodes in netns") Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: c244c092f1ed ("tipc: fix unexpected link reset due to discovery messages") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18tipc: improve throughput between nodes in netnsHoang Le8-11/+197
[ Upstream commit f73b12812a3d1d798b7517547ccdcf864844d2cd ] Currently, TIPC transports intra-node user data messages directly socket to socket, hence shortcutting all the lower layers of the communication stack. This gives TIPC very good intra node performance, both regarding throughput and latency. We now introduce a similar mechanism for TIPC data traffic across network namespaces located in the same kernel. On the send path, the call chain is as always accompanied by the sending node's network name space pointer. However, once we have reliably established that the receiving node is represented by a namespace on the same host, we just replace the namespace pointer with the receiving node/namespace's ditto, and follow the regular socket receive patch though the receiving node. This technique gives us a throughput similar to the node internal throughput, several times larger than if we let the traffic go though the full network stacks. As a comparison, max throughput for 64k messages is four times larger than TCP throughput for the same type of traffic. To meet any security concerns, the following should be noted. - All nodes joining a cluster are supposed to have been be certified and authenticated by mechanisms outside TIPC. This is no different for nodes/namespaces on the same host; they have to auto discover each other using the attached interfaces, and establish links which are supervised via the regular link monitoring mechanism. Hence, a kernel local node has no other way to join a cluster than any other node, and have to obey to policies set in the IP or device layers of the stack. - Only when a sender has established with 100% certainty that the peer node is located in a kernel local namespace does it choose to let user data messages, and only those, take the crossover path to the receiving node/namespace. - If the receiving node/namespace is removed, its namespace pointer is invalidated at all peer nodes, and their neighbor link monitoring will eventually note that this node is gone. - To ensure the "100% certainty" criteria, and prevent any possible spoofing, received discovery messages must contain a proof that the sender knows a common secret. We use the hash mix of the sending node/namespace for this purpose, since it can be accessed directly by all other namespaces in the kernel. Upon reception of a discovery message, the receiver checks this proof against all the local namespaces'hash_mix:es. If it finds a match, that, along with a matching node id and cluster id, this is deemed sufficient proof that the peer node in question is in a local namespace, and a wormhole can be opened. - We should also consider that TIPC is intended to be a cluster local IPC mechanism (just like e.g. UNIX sockets) rather than a network protocol, and hence we think it can justified to allow it to shortcut the lower protocol layers. Regarding traceability, we should notice that since commit 6c9081a3915d ("tipc: add loopback device tracking") it is possible to follow the node internal packet flow by just activating tcpdump on the loopback interface. This will be true even for this mechanism; by activating tcpdump on the involved nodes' loopback interfaces their inter-name space messaging can easily be tracked. v2: - update 'net' pointer when node left/rejoined v3: - grab read/write lock when using node ref obj v4: - clone traffics between netns to loopback Suggested-by: Jon Maloy <jon.maloy@ericsson.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Hoang Le <hoang.h.le@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: c244c092f1ed ("tipc: fix unexpected link reset due to discovery messages") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18regulator: da9211: Use irq handler when readyRicardo Ribalda1-5/+6
[ Upstream commit 02228f6aa6a64d588bc31e3267d05ff184d772eb ] If the system does not come from reset (like when it is kexec()), the regulator might have an IRQ waiting for us. If we enable the IRQ handler before its structures are ready, we crash. This patch fixes: [ 1.141839] Unable to handle kernel read from unreadable memory at virtual address 0000000000000078 [ 1.316096] Call trace: [ 1.316101] blocking_notifier_call_chain+0x20/0xa8 [ 1.322757] cpu cpu0: dummy supplies not allowed for exclusive requests [ 1.327823] regulator_notifier_call_chain+0x1c/0x2c [ 1.327825] da9211_irq_handler+0x68/0xf8 [ 1.327829] irq_thread+0x11c/0x234 [ 1.327833] kthread+0x13c/0x154 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Adam Ward <DLG-Adam.Ward.opensource@dm.renesas.com> Link: https://lore.kernel.org/r/20221124-da9211-v2-0-1779e3c5d491@chromium.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18EDAC/device: Fix period calculation in edac_device_reset_delay_period()Eliav Farber2-10/+9
commit e84077437902ec99eba0a6b516df772653f142c7 upstream. Fix period calculation in case user sets a value of 1000. The input of round_jiffies_relative() should be in jiffies and not in milli-seconds. [ bp: Use the same code pattern as in edac_device_workq_setup() for clarity. ] Fixes: c4cf3b454eca ("EDAC: Rework workqueue handling") Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Cc: <stable@kernel.org> Link: https://lore.kernel.org/r/20221020124458.22153-1-farbere@amazon.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18x86/boot: Avoid using Intel mnemonics in AT&T syntax asmPeter Zijlstra1-2/+2
commit 7c6dd961d0c8e7e8f9fdc65071fb09ece702e18d upstream. With 'GNU assembler (GNU Binutils for Debian) 2.39.90.20221231' the build now reports: arch/x86/realmode/rm/../../boot/bioscall.S: Assembler messages: arch/x86/realmode/rm/../../boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant arch/x86/realmode/rm/../../boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant arch/x86/boot/bioscall.S: Assembler messages: arch/x86/boot/bioscall.S:35: Warning: found `movsd'; assuming `movsl' was meant arch/x86/boot/bioscall.S:70: Warning: found `movsd'; assuming `movsl' was meant Which is due to: PR gas/29525 Note that with the dropped CMPSD and MOVSD Intel Syntax string insn templates taking operands, mixed IsString/non-IsString template groups (with memory operands) cannot occur anymore. With that maybe_adjust_templates() becomes unnecessary (and is hence being removed). More details: https://sourceware.org/bugzilla/show_bug.cgi?id=29525 Borislav Petkov further explains: " the particular problem here is is that the 'd' suffix is "conflicting" in the sense that you can have SSE mnemonics like movsD %xmm... and the same thing also for string ops (which is the case here) so apparently the agreement in binutils land is to use the always accepted suffixes 'l' or 'q' and phase out 'd' slowly... " Fixes: 7a734e7dd93b ("x86, setup: "glove box" BIOS calls -- infrastructure") Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/Y71I3Ex2pvIxMpsP@hirez.programming.kicks-ass.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18powerpc/imc-pmu: Fix use of mutex in IRQs disabled sectionKajol Jain2-71/+67
commit 76d588dddc459fefa1da96e0a081a397c5c8e216 upstream. Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event. Command to trigger the warning: # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5 Performance counter stats for 'sleep 5': 0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ 5.002117947 seconds time elapsed 0.000131000 seconds user 0.001063000 seconds sys Below is snippet of the warning in dmesg: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec preempt_count: 2, expected: 0 4 locks held by perf-exec/2869: #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90 #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0 #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510 #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510 irq event stamp: 4806 hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0 hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510 softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV Call Trace: dump_stack_lvl+0x98/0xe0 (unreliable) __might_resched+0x2f8/0x310 __mutex_lock+0x6c/0x13f0 thread_imc_event_add+0xf4/0x1b0 event_sched_in+0xe0/0x210 merge_sched_in+0x1f0/0x600 visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0 ctx_flexible_sched_in+0xcc/0x140 ctx_sched_in+0x20c/0x2a0 ctx_resched+0x104/0x1c0 perf_event_exec+0x340/0x510 begin_new_exec+0x730/0xef0 load_elf_binary+0x3f8/0x1e10 ... do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0 WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0 CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 #61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670 REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2) MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000 CFAR: c00000000013fb64 IRQMASK: 1 The above warning triggered because the current imc-pmu code uses mutex lock in interrupt disabled sections. The function mutex_lock() internally calls __might_resched(), which will check if IRQs are disabled and in case IRQs are disabled, it will trigger the warning. Fix the issue by changing the mutex lock to spinlock. Fixes: 8f95faaac56c ("powerpc/powernv: Detect and create IMC device") Reported-by: Michael Petlan <mpetlan@redhat.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> [mpe: Fix comments, trim oops in change log, add reported-by tags] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18netfilter: ipset: Fix overflow before widen in the bitmap_ip_create() function.Gavrilov Ilia1-2/+2
commit 9ea4b476cea1b7d461d16dda25ca3c7e616e2d15 upstream. When first_ip is 0, last_ip is 0xFFFFFFFF, and netmask is 31, the value of an arithmetic expression 2 << (netmask - mask_bits - 1) is subject to overflow due to a failure casting operands to a larger data type before performing the arithmetic. Note that it's harmless since the value will be checked at the next step. Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with SVACE. Fixes: b9fed748185a ("netfilter: ipset: Check and reject crazy /0 input parameters") Signed-off-by: Ilia.Gavrilov <Ilia.Gavrilov@infotecs.ru> Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18ext4: fix uninititialized value in 'ext4_evict_inode'Ye Bin1-0/+1
[ Upstream commit 7ea71af94eaaaf6d9aed24bc94a05b977a741cb9 ] Syzbot found the following issue: ===================================================== BUG: KMSAN: uninit-value in ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 ext4_evict_inode+0xdd/0x26b0 fs/ext4/inode.c:180 evict+0x365/0x9a0 fs/inode.c:664 iput_final fs/inode.c:1747 [inline] iput+0x985/0xdd0 fs/inode.c:1773 __ext4_new_inode+0xe54/0x7ec0 fs/ext4/ialloc.c:1361 ext4_mknod+0x376/0x840 fs/ext4/namei.c:2844 vfs_mknod+0x79d/0x830 fs/namei.c:3914 do_mknodat+0x47d/0xaa0 __do_sys_mknodat fs/namei.c:3992 [inline] __se_sys_mknodat fs/namei.c:3989 [inline] __ia32_sys_mknodat+0xeb/0x150 fs/namei.c:3989 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 Uninit was created at: __alloc_pages+0x9f1/0xe80 mm/page_alloc.c:5578 alloc_pages+0xaae/0xd80 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x1b5/0x1010 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0x10c3/0x2d60 mm/slub.c:3180 __slab_alloc mm/slub.c:3279 [inline] slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc_lru+0x6f3/0xb30 mm/slub.c:3429 alloc_inode_sb include/linux/fs.h:3117 [inline] ext4_alloc_inode+0x5f/0x860 fs/ext4/super.c:1321 alloc_inode+0x83/0x440 fs/inode.c:259 new_inode_pseudo fs/inode.c:1018 [inline] new_inode+0x3b/0x430 fs/inode.c:1046 __ext4_new_inode+0x2a7/0x7ec0 fs/ext4/ialloc.c:959 ext4_mkdir+0x4d5/0x1560 fs/ext4/namei.c:2992 vfs_mkdir+0x62a/0x870 fs/namei.c:4035 do_mkdirat+0x466/0x7b0 fs/namei.c:4060 __do_sys_mkdirat fs/namei.c:4075 [inline] __se_sys_mkdirat fs/namei.c:4073 [inline] __ia32_sys_mkdirat+0xc4/0x120 fs/namei.c:4073 do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline] __do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178 do_fast_syscall_32+0x33/0x70 arch/x86/entry/common.c:203 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:246 entry_SYSENTER_compat_after_hwframe+0x70/0x82 CPU: 1 PID: 4625 Comm: syz-executor.2 Not tainted 6.1.0-rc4-syzkaller-62821-gcb231e2f67ec #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 ===================================================== Now, 'ext4_alloc_inode()' didn't init 'ei->i_flags'. If new inode failed before set 'ei->i_flags' in '__ext4_new_inode()', then do 'iput()'. As after 6bc0d63dad7f commit will access 'ei->i_flags' in 'ext4_evict_inode()' which will lead to access uninit-value. To solve above issue just init 'ei->i_flags' in 'ext4_alloc_inode()'. Reported-by: syzbot+57b25da729eb0b88177d@syzkaller.appspotmail.com Signed-off-by: Ye Bin <yebin10@huawei.com> Fixes: 6bc0d63dad7f ("ext4: remove EA inode entry from mbcache on inode eviction") Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221117073603.2598882-1-yebin@huaweicloud.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18ext4: fix use-after-free in ext4_orphan_cleanupBaokun Li1-1/+2
[ Upstream commit a71248b1accb2b42e4980afef4fa4a27fa0e36f5 ] I caught a issue as follows: ================================================================== BUG: KASAN: use-after-free in __list_add_valid+0x28/0x1a0 Read of size 8 at addr ffff88814b13f378 by task mount/710 CPU: 1 PID: 710 Comm: mount Not tainted 6.1.0-rc3-next #370 Call Trace: <TASK> dump_stack_lvl+0x73/0x9f print_report+0x25d/0x759 kasan_report+0xc0/0x120 __asan_load8+0x99/0x140 __list_add_valid+0x28/0x1a0 ext4_orphan_cleanup+0x564/0x9d0 [ext4] __ext4_fill_super+0x48e2/0x5300 [ext4] ext4_fill_super+0x19f/0x3a0 [ext4] get_tree_bdev+0x27b/0x450 ext4_get_tree+0x19/0x30 [ext4] vfs_get_tree+0x49/0x150 path_mount+0xaae/0x1350 do_mount+0xe2/0x110 __x64_sys_mount+0xf0/0x190 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> [...] ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_orphan_cleanup --- loop1: assume last_orphan is 12 --- list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan) ext4_truncate --> return 0 ext4_inode_attach_jinode --> return -ENOMEM iput(inode) --> free inode<12> --- loop2: last_orphan is still 12 --- list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan); // use inode<12> and trigger UAF To solve this issue, we need to propagate the return value of ext4_inode_attach_jinode() appropriately. Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221102080633.1630225-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18ext4: lost matching-pair of trace in ext4_truncatezhengliang1-8/+9
[ Upstream commit 9a5d265fed014115f35e598022c956e5d2fb863e ] It should call trace exit in all return path for ext4_truncate. Signed-off-by: zhengliang <zhengliang6@huawei.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com> Link: https://lore.kernel.org/r/20200701083027.45996-1-zhengliang6@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Stable-dep-of: a71248b1accb ("ext4: fix use-after-free in ext4_orphan_cleanup") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18ext4: fix bug_on in __es_tree_search caused by bad quota inodeBaokun Li1-0/+2
[ Upstream commit d323877484765aaacbb2769b06e355c2041ed115 ] We got a issue as fllows: ================================================================== kernel BUG at fs/ext4/extents_status.c:202! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 810 Comm: mount Not tainted 6.1.0-rc1-next-g9631525255e3 #352 RIP: 0010:__es_tree_search.isra.0+0xb8/0xe0 RSP: 0018:ffffc90001227900 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 0000000077512a0f RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000002a10 RDI: ffff8881004cd0c8 RBP: ffff888177512ac8 R08: 47ffffffffffffff R09: 0000000000000001 R10: 0000000000000001 R11: 00000000000679af R12: 0000000000002a10 R13: ffff888177512d88 R14: 0000000077512a10 R15: 0000000000000000 FS: 00007f4bd76dbc40(0000)GS:ffff88842fd00000(0000)knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005653bf993cf8 CR3: 000000017bfdf000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_es_cache_extent+0xe2/0x210 ext4_cache_extents+0xd2/0x110 ext4_find_extent+0x5d5/0x8c0 ext4_ext_map_blocks+0x9c/0x1d30 ext4_map_blocks+0x431/0xa50 ext4_getblk+0x82/0x340 ext4_bread+0x14/0x110 ext4_quota_read+0xf0/0x180 v2_read_header+0x24/0x90 v2_check_quota_file+0x2f/0xa0 dquot_load_quota_sb+0x26c/0x760 dquot_load_quota_inode+0xa5/0x190 ext4_enable_quotas+0x14c/0x300 __ext4_fill_super+0x31cc/0x32c0 ext4_fill_super+0x115/0x2d0 get_tree_bdev+0x1d2/0x360 ext4_get_tree+0x19/0x30 vfs_get_tree+0x26/0xe0 path_mount+0x81d/0xfc0 do_mount+0x8d/0xc0 __x64_sys_mount+0xc0/0x160 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd </TASK> ================================================================== Above issue may happen as follows: ------------------------------------- ext4_fill_super ext4_orphan_cleanup ext4_enable_quotas ext4_quota_enable ext4_iget --> get error inode <5> ext4_ext_check_inode --> Wrong imode makes it escape inspection make_bad_inode(inode) --> EXT4_BOOT_LOADER_INO set imode dquot_load_quota_inode vfs_setup_quota_inode --> check pass dquot_load_quota_sb v2_check_quota_file v2_read_header ext4_quota_read ext4_bread ext4_getblk ext4_map_blocks ext4_ext_map_blocks ext4_find_extent ext4_cache_extents ext4_es_cache_extent __es_tree_search.isra.0 ext4_es_end --> Wrong extents trigger BUG_ON In the above issue, s_usr_quota_inum is set to 5, but inode<5> contains incorrect imode and disordered extents. Because 5 is EXT4_BOOT_LOADER_INO, the ext4_ext_check_inode check in the ext4_iget function can be bypassed, finally, the extents that are not checked trigger the BUG_ON in the __es_tree_search function. To solve this issue, check whether the inode is bad_inode in vfs_setup_quota_inode(). Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20221026042310.3839669-2-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18quota: Factor out setup of quota inodeJan Kara2-41/+69
[ Upstream commit c7d3d28360fdb3ed3a5aa0bab19315e0fdc994a1 ] Factor out setting up of quota inode and eventual error cleanup from vfs_load_quota_inode(). This will simplify situation for filesystems that don't have any quota inodes. Signed-off-by: Jan Kara <jack@suse.cz> Stable-dep-of: d32387748476 ("ext4: fix bug_on in __es_tree_search caused by bad quota inode") Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18jbd2: use the correct print formatBixuan Cui1-20/+20
[ Upstream commit d87a7b4c77a997d5388566dd511ca8e6b8e8a0a8 ] The print format error was found when using ftrace event: <...>-1406 [000] .... 23599442.895823: jbd2_end_commit: dev 252,8 transaction -1866216965 sync 0 head -1866217368 <...>-1406 [000] .... 23599442.896299: jbd2_start_commit: dev 252,8 transaction -1866216964 sync 0 Use the correct print format for transaction, head and tid. Fixes: 879c5e6b7cb4 ('jbd2: convert instrumentation from markers to tracepoints') Signed-off-by: Bixuan Cui <cuibixuan@linux.alibaba.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Link: https://lore.kernel.org/r/1665488024-95172-1-git-send-email-cuibixuan@linux.alibaba.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18usb: ulpi: defer ulpi_register on ulpi_read_id timeoutFerry Toth1-1/+1
[ Upstream commit 8a7b31d545d3a15f0e6f5984ae16f0ca4fd76aac ] Since commit 0f0101719138 ("usb: dwc3: Don't switch OTG -> peripheral if extcon is present") Dual Role support on Intel Merrifield platform broke due to rearranging the call to dwc3_get_extcon(). It appears to be caused by ulpi_read_id() on the first test write failing with -ETIMEDOUT. Currently ulpi_read_id() expects to discover the phy via DT when the test write fails and returns 0 in that case, even if DT does not provide the phy. As a result usb probe completes without phy. Make ulpi_read_id() return -ETIMEDOUT to its user if the first test write fails. The user should then handle it appropriately. A follow up patch will make dwc3_core_init() set -EPROBE_DEFER in this case and bail out. Fixes: ef6a7bcfb01c ("usb: ulpi: Support device discovery via DT") Cc: stable@vger.kernel.org Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Ferry Toth <ftoth@exalondelft.nl> Link: https://lore.kernel.org/r/20221205201527.13525-2-ftoth@exalondelft.nl Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18wifi: wilc1000: sdio: fix module autoloadingMichael Walle1-0/+1
[ Upstream commit 57d545b5a3d6ce3a8fb6b093f02bfcbb908973f3 ] There are no SDIO module aliases included in the driver, therefore, module autoloading isn't working. Add the proper MODULE_DEVICE_TABLE(). Cc: stable@vger.kernel.org Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20221027171221.491937-1-michael@walle.cc Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-01-18ipv6: raw: Deduct extension header length in rawv6_push_pending_framesHerbert Xu1-0/+4
commit cb3e9864cdbe35ff6378966660edbcbac955fe17 upstream. The total cork length created by ip6_append_data includes extension headers, so we must exclude them when comparing them against the IPV6_CHECKSUM offset which does not include extension headers. Reported-by: Kyle Zeng <zengyhkyle@gmail.com> Fixes: 357b40a18b04 ("[IPV6]: IPV6_CHECKSUM socket option can corrupt kernel memory") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18ixgbe: fix pci device refcount leakYang Yingliang1-5/+9
commit b93fb4405fcb5112c5739c5349afb52ec7f15c07 upstream. As the comment of pci_get_domain_bus_and_slot() says, it returns a PCI device with refcount incremented, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). In ixgbe_get_first_secondary_devfn() and ixgbe_x550em_a_has_mii(), pci_dev_put() is called to avoid leak. Fixes: 8fa10ef01260 ("ixgbe: register a mdiobus") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18platform/x86: sony-laptop: Don't turn off 0x153 keyboard backlight during probeHans de Goede1-7/+14
commit ad75bd85b1db69c97eefea07b375567821f6ef58 upstream. The 0x153 version of the kbd backlight control SNC handle has no separate address to probe if the backlight is there. This turns the probe call into a set keyboard backlight call with a value of 0 turning off the keyboard backlight. Skip probing when there is no separate probe address to avoid this. Link: https://bugzilla.redhat.com/show_bug.cgi?id=1583752 Fixes: 800f20170dcf ("Keyboard backlight control for some Vaio Fit models") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Mattia Dongili <malattia@linux.it> Link: https://lore.kernel.org/r/20221213122943.11123-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18drm/msm/adreno: Make adreno quirks not overwrite each otherKonrad Dybcio1-6/+4
commit 13ef096e342b00e30b95a90c6c13eee1f0bec4c5 upstream. So far the adreno quirks have all been assigned with an OR operator, which is problematic, because they were assigned consecutive integer values, which makes checking them with an AND operator kind of no bueno.. Switch to using BIT(n) so that only the quirks that the programmer chose are taken into account when evaluating info->quirks & ADRENO_QUIRK_... Fixes: 370063ee427a ("drm/msm/adreno: Add A540 support") Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org> Reviewed-by: Rob Clark <robdclark@gmail.com> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/516456/ Link: https://lore.kernel.org/r/20230102100201.77286-1-konrad.dybcio@linaro.org Signed-off-by: Rob Clark <robdclark@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18cifs: Fix uninitialized memory read for smb311 posix symlink createVolker Lendecke1-0/+1
commit a152d05ae4a71d802d50cf9177dba34e8bb09f68 upstream. If smb311 posix is enabled, we send the intended mode for file creation in the posix create context. Instead of using what's there on the stack, create the mfsymlink file with 0644. Fixes: ce558b0e17f8a ("smb3: Add posix create context for smb3.11 posix mounts") Cc: stable@vger.kernel.org Signed-off-by: Volker Lendecke <vl@samba.org> Reviewed-by: Tom Talpey <tom@talpey.com> Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18ALSA: hda/hdmi: Add a HP device 0x8715 to force connect listAdrian Chan1-0/+1
commit de1ccb9e61728dd941fe0e955a7a129418657267 upstream. Add the 'HP Engage Flex Mini' device to the force connect list to enable audio through HDMI. Signed-off-by: Adrian Chan <adchan@google.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAFClement Lecigne1-0/+4
[ Note: this is a fix that works around the bug equivalently as the two upstream commits: 1fa4445f9adf ("ALSA: control - introduce snd_ctl_notify_one() helper") 56b88b50565c ("ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF") but in a simpler way to fit with older stable trees -- tiwai ] Add missing locking in ctl_elem_read_user/ctl_elem_write_user which can be easily triggered and turned into an use-after-free. Example code paths with SNDRV_CTL_IOCTL_ELEM_READ: 64-bits: snd_ctl_ioctl snd_ctl_elem_read_user [takes controls_rwsem] snd_ctl_elem_read [lock properly held, all good] [drops controls_rwsem] 32-bits (compat): snd_ctl_ioctl_compat snd_ctl_elem_write_read_compat ctl_elem_write_read snd_ctl_elem_read [missing lock, not good] CVE-2023-0266 was assigned for this issue. Signed-off-by: Clement Lecigne <clecigne@google.com> Cc: stable@kernel.org # 5.12 and older Signed-off-by: Takashi Iwai <tiwai@suse.de> Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18net/ulp: prevent ULP without clone op from entering the LISTEN statusPaolo Abeni1-1/+15
commit 2c02d41d71f90a5168391b6a5f2954112ba2307c upstream. When an ULP-enabled socket enters the LISTEN status, the listener ULP data pointer is copied inside the child/accepted sockets by sk_clone_lock(). The relevant ULP can take care of de-duplicating the context pointer via the clone() operation, but only MPTCP and SMC implement such op. Other ULPs may end-up with a double-free at socket disposal time. We can't simply clear the ULP data at clone time, as TLS replaces the socket ops with custom ones assuming a valid TLS ULP context is available. Instead completely prevent clone-less ULP sockets from entering the LISTEN status. Fixes: 734942cc4ea6 ("tcp: ULP infrastructure") Reported-by: slipper <slipper.alive@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4b80c3d1dbe3d0ab072f80450c202d9bc88b4b03.1672740602.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18s390/percpu: add READ_ONCE() to arch_this_cpu_to_op_simple()Heiko Carstens1-1/+1
commit e3f360db08d55a14112bd27454e616a24296a8b0 upstream. Make sure that *ptr__ within arch_this_cpu_to_op_simple() is only dereferenced once by using READ_ONCE(). Otherwise the compiler could generate incorrect code. Cc: <stable@vger.kernel.org> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18s390/kexec: fix ipl report address for kdumpAlexander Egorenkov1-2/+3
commit c2337a40e04dde1692b5b0a46ecc59f89aaba8a1 upstream. This commit addresses the following erroneous situation with file-based kdump executed on a system with a valid IPL report. On s390, a kdump kernel, its initrd and IPL report if present are loaded into a special and reserved on boot memory region - crashkernel. When a system crashes and kdump was activated before, the purgatory code is entered first which swaps the crashkernel and [0 - crashkernel size] memory regions. Only after that the kdump kernel is entered. For this reason, the pointer to an IPL report in lowcore must point to the IPL report after the swap and not to the address of the IPL report that was located in crashkernel memory region before the swap. Failing to do so, makes the kdump's decompressor try to read memory from the crashkernel memory region which already contains the production's kernel memory. The situation described above caused spontaneous kdump failures/hangs on systems where the Secure IPL is activated because on such systems an IPL report is always present. In that case kdump's decompressor tried to parse an IPL report which frequently lead to illegal memory accesses because an IPL report contains addresses to various data. Cc: <stable@vger.kernel.org> Fixes: 99feaa717e55 ("s390/kexec_file: Create ipl report and pass to next kernel") Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18perf auxtrace: Fix address filter duplicate symbol selectionAdrian Hunter1-1/+1
commit cf129830ee820f7fc90b98df193cd49d49344d09 upstream. When a match has been made to the nth duplicate symbol, return success not error. Example: Before: $ cat file.c cat: file.c: No such file or directory $ cat file1.c #include <stdio.h> static void func(void) { printf("First func\n"); } void other(void); int main() { func(); other(); return 0; } $ cat file2.c #include <stdio.h> static void func(void) { printf("Second func\n"); } void other(void) { func(); } $ gcc -Wall -Wextra -o test file1.c file2.c $ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test Multiple symbols with name 'func' #1 0x1149 l func which is near main #2 0x1179 l func which is near other Disambiguate symbol name by inserting #n after the name e.g. func #2 Or select a global symbol by inserting #0 or #g or #G Failed to parse address filter: 'filter func @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test Failed to parse address filter: 'filter func #2 @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. After: $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test First func Second func [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] $ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns 1231062.526977619: tr strt 0 [unknown] => 558495708179 func 1231062.526977619: tr end call 558495708188 func => 558495708050 _init 1231062.526979286: tr strt 0 [unknown] => 55849570818d func 1231062.526979286: tr end return 55849570818f func => 55849570819d other Fixes: 1b36c03e356936d6 ("perf record: Add support for using symbols in address filters") Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-01-18docs: Fix the docs build with Sphinx 6.0Jonathan Corbet1-2/+4
commit 0283189e8f3d0917e2ac399688df85211f48447b upstream. Sphinx 6.0 removed the execfile_() function, which we use as part of the configuration process. They *did* warn us... Just open-code the functionality as is done in Sphinx itself. Tested (using SPHINX_CONF, since this code is only executed with an alternative config file) on various Sphinx versions from 2.5 through 6.0. Reported-by: Martin Liška <mliska@suse.cz> Cc: stable@vger.kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-03 01:56:18 +0300