summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-12-19Linux 5.4.228v5.4.228Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20221215172905.468656378@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Hulk Robot <hulkrobot@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-19ASoC: ops: Correct bounds check for second channel on SX controlsCharles Keepax1-2/+3
commit f33bcc506050f89433a52a3052054d4ebd37b1c1 upstream. Currently the check against the max value for the control is being applied after the value has had the minimum applied and been masked. But the max value simply indicates the number of volume levels on an SX control, and as such should just be applied on the raw value. Fixes: 97eea946b939 ("ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221125162348.1288005-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-19can: mcba_usb: Fix termination command argumentYasushi SHOJI1-3/+7
[ Upstream commit 1a8e3bd25f1e789c8154e11ea24dc3ec5a4c1da0 ] Microchip USB Analyzer can activate the internal termination resistors by setting the "termination" option ON, or OFF to to deactivate them. As I've observed, both with my oscilloscope and captured USB packets below, you must send "0" to turn it ON, and "1" to turn it OFF. From the schematics in the user's guide, I can confirm that you must drive the CAN_RES signal LOW "0" to activate the resistors. Reverse the argument value of usb_msg.termination to fix this. These are the two commands sequence, ON then OFF. > No. Time Source Destination Protocol Length Info > 1 0.000000 host 1.3.1 USB 46 URB_BULK out > > Frame 1: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) > USB URB > Leftover Capture Data: a80000000000000000000000000000000000a8 > > No. Time Source Destination Protocol Length Info > 2 4.372547 host 1.3.1 USB 46 URB_BULK out > > Frame 2: 46 bytes on wire (368 bits), 46 bytes captured (368 bits) > USB URB > Leftover Capture Data: a80100000000000000000000000000000000a9 Signed-off-by: Yasushi SHOJI <yashi@spacecubics.com> Link: https://lore.kernel.org/all/20221124152504.125994-1-yashi@spacecubics.com Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-19can: sja1000: fix size of OCR_MODE_MASK defineHeiko Schocher1-1/+1
[ Upstream commit 26e8f6a75248247982458e8237b98c9fb2ffcf9d ] bitfield mode in ocr register has only 2 bits not 3, so correct the OCR_MODE_MASK define. Signed-off-by: Heiko Schocher <hs@denx.de> Link: https://lore.kernel.org/all/20221123071636.2407823-1-hs@denx.de Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-19pinctrl: meditatek: Startup with the IRQs disabledRicardo Ribalda1-3/+6
[ Upstream commit 11780e37565db4dd064d3243ca68f755c13f65b4 ] If the system is restarted via kexec(), the peripherals do not start with a known state. If the previous system had enabled an IRQs we will receive unexected IRQs that can lock the system. [ 28.109251] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] [ 28.109263] Modules linked in: [ 28.109273] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.79-14458-g4b9edf7b1ac6 #1 9f2e76613148af94acccd64c609a552fb4b4354b [ 28.109284] Hardware name: Google Elm (DT) [ 28.109290] pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 28.109298] pc : __do_softirq+0xa0/0x388 [ 28.109309] lr : __do_softirq+0x70/0x388 [ 28.109316] sp : ffffffc008003ee0 [ 28.109321] x29: ffffffc008003f00 x28: 000000000000000a x27: 0000000000000080 [ 28.109334] x26: 0000000000000001 x25: ffffffefa7b350c0 x24: ffffffefa7b47480 [ 28.109346] x23: ffffffefa7b3d000 x22: 0000000000000000 x21: ffffffefa7b0fa40 [ 28.109358] x20: ffffffefa7b005b0 x19: ffffffefa7b47480 x18: 0000000000065b6b [ 28.109370] x17: ffffffefa749c8b0 x16: 000000000000018c x15: 00000000000001b8 [ 28.109382] x14: 00000000000d3b6b x13: 0000000000000006 x12: 0000000000057e91 [ 28.109394] x11: 0000000000000000 x10: 0000000000000000 x9 : ffffffefa7b47480 [ 28.109406] x8 : 00000000000000e0 x7 : 000000000f424000 x6 : 0000000000000000 [ 28.109418] x5 : ffffffefa7dfaca0 x4 : ffffffefa7dfadf0 x3 : 000000000000000f [ 28.109429] x2 : 0000000000000000 x1 : 0000000000000100 x0 : 0000000001ac65c5 [ 28.109441] Call trace: [ 28.109447] __do_softirq+0xa0/0x388 [ 28.109454] irq_exit+0xc0/0xe0 [ 28.109464] handle_domain_irq+0x68/0x90 [ 28.109473] gic_handle_irq+0xac/0xf0 [ 28.109480] call_on_irq_stack+0x28/0x50 [ 28.109488] do_interrupt_handler+0x44/0x58 [ 28.109496] el1_interrupt+0x30/0x58 [ 28.109506] el1h_64_irq_handler+0x18/0x24 [ 28.109512] el1h_64_irq+0x7c/0x80 [ 28.109519] arch_local_irq_enable+0xc/0x18 [ 28.109529] default_idle_call+0x40/0x140 [ 28.109539] do_idle+0x108/0x290 [ 28.109547] cpu_startup_entry+0x2c/0x30 [ 28.109554] rest_init+0xe8/0xf8 [ 28.109562] arch_call_rest_init+0x18/0x24 [ 28.109571] start_kernel+0x338/0x42c [ 28.109578] __primary_switched+0xbc/0xc4 [ 28.109588] Kernel panic - not syncing: softlockup: hung tasks Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Link: https://lore.kernel.org/r/20221122-mtk-pinctrl-v1-1-bedf5655a3d2@chromium.org Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-19ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()Mark Brown1-0/+6
[ Upstream commit 97eea946b93961fffd29448dcda7398d0d51c4b2 ] The bounds checks in snd_soc_put_volsw_sx() are only being applied to the first channel, meaning it is possible to write out of bounds values to the second channel in stereo controls. Add appropriate checks. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220511134137.169575-2-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-19nfp: fix use-after-free in area_cache_get()Jialiang Wang1-1/+2
commit 02e1a114fdb71e59ee6770294166c30d437bf86a upstream. area_cache_get() is used to distribute cache->area and set cache->id, and if cache->id is not 0 and cache->area->kref refcount is 0, it will release the cache->area by nfp_cpp_area_release(). area_cache_get() set cache->id before cpp->op->area_init() and nfp_cpp_area_acquire(). But if area_init() or nfp_cpp_area_acquire() fails, the cache->id is is already set but the refcount is not increased as expected. At this time, calling the nfp_cpp_area_release() will cause use-after-free. To avoid the use-after-free, set cache->id after area_init() and nfp_cpp_area_acquire() complete successfully. Note: This vulnerability is triggerable by providing emulated device equipped with specified configuration. BUG: KASAN: use-after-free in nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) Write of size 4 at addr ffff888005b7f4a0 by task swapper/0/1 Call Trace: <TASK> nfp6000_area_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:760) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:884) Allocated by task 1: nfp_cpp_area_alloc_with_name (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:303) nfp_cpp_area_cache_add (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:802) nfp6000_init (drivers/net/ethernet/netronome/nfp/nfpcore/nfp6000_pcie.c:1230) nfp_cpp_from_operations (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:1215) nfp_pci_probe (drivers/net/ethernet/netronome/nfp/nfp_main.c:744) Freed by task 1: kfree (mm/slub.c:4562) area_cache_get.constprop.8 (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:873) nfp_cpp_read (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:924 drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cppcore.c:973) nfp_cpp_readl (drivers/net/ethernet/netronome/nfp/nfpcore/nfp_cpplib.c:48) Signed-off-by: Jialiang Wang <wangjialiang0806@163.com> Reviewed-by: Yinjun Zhang <yinjun.zhang@corigine.com> Acked-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220810073057.4032-1-wangjialiang0806@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-19block: unhash blkdev part inode when the part is deletedMing Lei1-0/+7
v5.11 changes the blkdev lookup mechanism completely since commit 22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get"), and small part of the change is to unhash part bdev inode when deleting partition. Turns out this kind of change does fix one nasty issue in case of BLOCK_EXT_MAJOR: 1) when one partition is deleted & closed, disk_put_part() is always called before bdput(bdev), see blkdev_put(); so the part's devt can be freed & re-used before the inode is dropped 2) then new partition with same devt can be created just before the inode in 1) is dropped, then the old inode/bdev structurein 1) is re-used for this new partition, this way causes use-after-free and kernel panic. It isn't possible to backport the whole big patchset of "merge struct block_device and struct hd_struct v4" for addressing this issue. https://lore.kernel.org/linux-block/20201128161510.347752-1-hch@lst.de/ So fixes it by unhashing part bdev in delete_partition(), and this way is actually aligned with v5.11+'s behavior. Backported from the following 5.10.y commit: 5f2f77560591 ("block: unhash blkdev part inode when the part is deleted") Reported-by: Shiwei Cui <cuishw@inspur.com> Tested-by: Shiwei Cui <cuishw@inspur.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.cz> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-19mm/hugetlb: fix races when looking up a CONT-PTE/PMD size hugetlb pageBaolin Wang3-19/+30
commit fac35ba763ed07ba93154c95ffc0c4a55023707f upstream. On some architectures (like ARM64), it can support CONT-PTE/PMD size hugetlb, which means it can support not only PMD/PUD size hugetlb (2M and 1G), but also CONT-PTE/PMD size(64K and 32M) if a 4K page size specified. So when looking up a CONT-PTE size hugetlb page by follow_page(), it will use pte_offset_map_lock() to get the pte entry lock for the CONT-PTE size hugetlb in follow_page_pte(). However this pte entry lock is incorrect for the CONT-PTE size hugetlb, since we should use huge_pte_lock() to get the correct lock, which is mm->page_table_lock. That means the pte entry of the CONT-PTE size hugetlb under current pte lock is unstable in follow_page_pte(), we can continue to migrate or poison the pte entry of the CONT-PTE size hugetlb, which can cause some potential race issues, even though they are under the 'pte lock'. For example, suppose thread A is trying to look up a CONT-PTE size hugetlb page by move_pages() syscall under the lock, however antoher thread B can migrate the CONT-PTE hugetlb page at the same time, which will cause thread A to get an incorrect page, if thread A also wants to do page migration, then data inconsistency error occurs. Moreover we have the same issue for CONT-PMD size hugetlb in follow_huge_pmd(). To fix above issues, rename the follow_huge_pmd() as follow_huge_pmd_pte() to handle PMD and PTE level size hugetlb, which uses huge_pte_lock() to get the correct pte entry lock to make the pte entry stable. Mike said: Support for CONT_PMD/_PTE was added with bb9dd3df8ee9 ("arm64: hugetlb: refactor find_num_contig()"). Patch series "Support for contiguous pte hugepages", v4. However, I do not believe these code paths were executed until migration support was added with 5480280d3f2d ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages") I would go with 5480280d3f2d for the Fixes: targe. Link: https://lkml.kernel.org/r/635f43bdd85ac2615a58405da82b4d33c6e5eb05.1662017562.git.baolin.wang@linux.alibaba.com Fixes: 5480280d3f2d ("arm64/mm: enable HugeTLB migration for contiguous bit HugeTLB pages") Signed-off-by: Baolin Wang <baolin.wang@linux.alibaba.com> Suggested-by: Mike Kravetz <mike.kravetz@oracle.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: David Hildenbrand <david@redhat.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org> [5.4: Fixup contextual diffs before pin_user_pages()] Signed-off-by: Samuel Mendoza-Jonas <samjonas@amazon.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-19x86/smpboot: Move rcu_cpu_starting() earlierPaul E. McKenney2-2/+1
commit 29368e09392123800e5e2bf0f3eda91f16972e52 upstream. The call to rcu_cpu_starting() in mtrr_ap_init() is not early enough in the CPU-hotplug onlining process, which results in lockdep splats as follows: ============================= WARNING: suspicious RCU usage 5.9.0+ #268 Not tainted ----------------------------- kernel/kprobes.c:300 RCU-list traversed in non-reader section!! other info that might help us debug this: RCU used illegally from offline CPU! rcu_scheduler_active = 1, debug_locks = 1 no locks held by swapper/1/0. stack backtrace: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.9.0+ #268 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-1ubuntu1 04/01/2014 Call Trace: dump_stack+0x77/0x97 __is_insn_slot_addr+0x15d/0x170 kernel_text_address+0xba/0xe0 ? get_stack_info+0x22/0xa0 __kernel_text_address+0x9/0x30 show_trace_log_lvl+0x17d/0x380 ? dump_stack+0x77/0x97 dump_stack+0x77/0x97 __lock_acquire+0xdf7/0x1bf0 lock_acquire+0x258/0x3d0 ? vprintk_emit+0x6d/0x2c0 _raw_spin_lock+0x27/0x40 ? vprintk_emit+0x6d/0x2c0 vprintk_emit+0x6d/0x2c0 printk+0x4d/0x69 start_secondary+0x1c/0x100 secondary_startup_64_no_verify+0xb8/0xbb This is avoided by moving the call to rcu_cpu_starting up near the beginning of the start_secondary() function. Note that the raw_smp_processor_id() is required in order to avoid calling into lockdep before RCU has declared the CPU to be watched for readers. Link: https://lore.kernel.org/lkml/160223032121.7002.1269740091547117869.tip-bot2@tip-bot2/ Reported-by: Qian Cai <cai@redhat.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Cc: Joel Fernandes <joel@joelfernandes.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-19net: bpf: Allow TC programs to call BPF_FUNC_skb_change_headLorenzo Colitti1-0/+2
commit 6f3f65d80dac8f2bafce2213005821fccdce194c upstream. This allows TC eBPF programs to modify and forward (redirect) packets from interfaces without ethernet headers (for example cellular) to interfaces with (for example ethernet/wifi). The lack of this appears to simply be an oversight. Tested: in active use in Android R on 4.14+ devices for ipv6 cellular to wifi tethering offload. Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14Linux 5.4.227v5.4.227Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20221212130917.599345531@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14can: esd_usb: Allow REC and TEC to return to zeroFrank Jungclaus1-0/+6
[ Upstream commit 918ee4911f7a41fb4505dff877c1d7f9f64eb43e ] We don't get any further EVENT from an esd CAN USB device for changes on REC or TEC while those counters converge to 0 (with ecc == 0). So when handling the "Back to Error Active"-event force txerr = rxerr = 0, otherwise the berr-counters might stay on values like 95 forever. Also, to make life easier during the ongoing development a netdev_dbg() has been introduced to allow dumping error events send by an esd CAN USB device. Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device") Signed-off-by: Frank Jungclaus <frank.jungclaus@esd.eu> Link: https://lore.kernel.org/all/20221130202242.3998219-2-frank.jungclaus@esd.eu Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: mvneta: Fix an out of bounds checkDan Carpenter1-4/+1
[ Upstream commit cdd97383e19d4afe29adc3376025a15ae3bab3a3 ] In an earlier commit, I added a bounds check to prevent an out of bounds read and a WARN(). On further discussion and consideration that check was probably too aggressive. Instead of returning -EINVAL, a better fix would be to just prevent the out of bounds read but continue the process. Background: The value of "pp->rxq_def" is a number between 0-7 by default, or even higher depending on the value of "rxq_number", which is a module parameter. If the value is more than the number of available CPUs then it will trigger the WARN() in cpu_max_bits_warn(). Fixes: e8b4fc13900b ("net: mvneta: Prevent out of bounds read in mvneta_config_rss()") Signed-off-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/Y5A7d1E5ccwHTYPf@kadam Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ipv6: avoid use-after-free in ip6_fragment()Eric Dumazet1-0/+5
[ Upstream commit 803e84867de59a1e5d126666d25eb4860cfd2ebe ] Blamed commit claimed rcu_read_lock() was held by ip6_fragment() callers. It seems to not be always true, at least for UDP stack. syzbot reported: BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:245 [inline] BUG: KASAN: use-after-free in ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 Read of size 8 at addr ffff88801d403e80 by task syz-executor.3/7618 CPU: 1 PID: 7618 Comm: syz-executor.3 Not tainted 6.1.0-rc6-syzkaller-00012-g4312098baf37 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x45d mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 ip6_dst_idev include/net/ip6_fib.h:245 [inline] ip6_fragment+0x2724/0x2770 net/ipv6/ip6_output.c:951 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fde3588c0d9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fde365b6168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00007fde359ac050 RCX: 00007fde3588c0d9 RDX: 000000000000ffdc RSI: 00000000200000c0 RDI: 000000000000000a RBP: 00007fde358e7ae9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fde35acfb1f R14: 00007fde365b6300 R15: 0000000000022000 </TASK> Allocated by task 7618: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 __kasan_slab_alloc+0x82/0x90 mm/kasan/common.c:325 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x2b4/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 ip6_rt_pcpu_alloc net/ipv6/route.c:1369 [inline] rt6_make_pcpu_route net/ipv6/route.c:1417 [inline] ip6_pol_route+0x901/0x1190 net/ipv6/route.c:2254 pol_lookup_func include/net/ip6_fib.h:582 [inline] fib6_rule_lookup+0x52e/0x6f0 net/ipv6/fib6_rules.c:121 ip6_route_output_flags_noref+0x2e6/0x380 net/ipv6/route.c:2625 ip6_route_output_flags+0x76/0x320 net/ipv6/route.c:2638 ip6_route_output include/net/ip6_route.h:98 [inline] ip6_dst_lookup_tail+0x5ab/0x1620 net/ipv6/ip6_output.c:1092 ip6_dst_lookup_flow+0x90/0x1d0 net/ipv6/ip6_output.c:1222 ip6_sk_dst_lookup_flow+0x553/0x980 net/ipv6/ip6_output.c:1260 udpv6_sendmsg+0x151d/0x2c80 net/ipv6/udp.c:1554 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 7599: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 kasan_set_track+0x25/0x30 mm/kasan/common.c:52 kasan_save_free_info+0x2e/0x40 mm/kasan/generic.c:511 ____kasan_slab_free mm/kasan/common.c:236 [inline] ____kasan_slab_free+0x160/0x1c0 mm/kasan/common.c:200 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x8b/0x1c0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] kmem_cache_free+0xee/0x5c0 mm/slub.c:3683 dst_destroy+0x2ea/0x400 net/core/dst.c:127 rcu_do_batch kernel/rcu/tree.c:2250 [inline] rcu_core+0x81f/0x1980 kernel/rcu/tree.c:2510 __do_softirq+0x1fb/0xadc kernel/softirq.c:571 Last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] skb_release_head_state+0x250/0x2a0 net/core/skbuff.c:838 skb_release_all net/core/skbuff.c:852 [inline] __kfree_skb net/core/skbuff.c:868 [inline] kfree_skb_reason+0x151/0x4b0 net/core/skbuff.c:891 kfree_skb_list_reason+0x4b/0x70 net/core/skbuff.c:901 kfree_skb_list include/linux/skbuff.h:1227 [inline] ip6_fragment+0x2026/0x2770 net/ipv6/ip6_output.c:949 __ip6_finish_output net/ipv6/ip6_output.c:193 [inline] ip6_finish_output+0x9a3/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] ip6_local_out+0xb3/0x1a0 net/ipv6/output_core.c:161 ip6_send_skb+0xbb/0x340 net/ipv6/ip6_output.c:1966 udp_v6_send_skb+0x82a/0x18a0 net/ipv6/udp.c:1286 udp_v6_push_pending_frames+0x140/0x200 net/ipv6/udp.c:1313 udpv6_sendmsg+0x18da/0x2c80 net/ipv6/udp.c:1606 inet6_sendmsg+0x9d/0xe0 net/ipv6/af_inet6.c:665 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 sock_write_iter+0x295/0x3d0 net/socket.c:1108 call_write_iter include/linux/fs.h:2191 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x9ed/0xdd0 fs/read_write.c:584 ksys_write+0x1ec/0x250 fs/read_write.c:637 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Second to last potentially related work creation: kasan_save_stack+0x22/0x40 mm/kasan/common.c:45 __kasan_record_aux_stack+0xbc/0xd0 mm/kasan/generic.c:481 call_rcu+0x9d/0x820 kernel/rcu/tree.c:2798 dst_release net/core/dst.c:177 [inline] dst_release+0x7d/0xe0 net/core/dst.c:167 refdst_drop include/net/dst.h:256 [inline] skb_dst_drop include/net/dst.h:268 [inline] __dev_queue_xmit+0x1b9d/0x3ba0 net/core/dev.c:4211 dev_queue_xmit include/linux/netdevice.h:3008 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x51b/0x840 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:546 [inline] ip6_finish_output2+0x56c/0x1530 net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x694/0x1170 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:291 [inline] ip6_output+0x1f1/0x540 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:445 [inline] NF_HOOK include/linux/netfilter.h:302 [inline] NF_HOOK include/linux/netfilter.h:296 [inline] mld_sendpack+0xa09/0xe70 net/ipv6/mcast.c:1820 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 The buggy address belongs to the object at ffff88801d403dc0 which belongs to the cache ip6_dst_cache of size 240 The buggy address is located 192 bytes inside of 240-byte region [ffff88801d403dc0, ffff88801d403eb0) The buggy address belongs to the physical page: page:ffffea00007500c0 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d403 memcg:ffff888022f49c81 flags: 0xfff00000000200(slab|node=0|zone=1|lastcpupid=0x7ff) raw: 00fff00000000200 ffffea0001ef6580 dead000000000002 ffff88814addf640 raw: 0000000000000000 00000000800c000c 00000001ffffffff ffff888022f49c81 page dumped because: kasan: bad access detected page_owner tracks the page as allocated page last allocated via order 0, migratetype Unmovable, gfp_mask 0x112a20(GFP_ATOMIC|__GFP_NOWARN|__GFP_NORETRY|__GFP_HARDWALL), pid 3719, tgid 3719 (kworker/0:6), ts 136223432244, free_ts 136222971441 prep_new_page mm/page_alloc.c:2539 [inline] get_page_from_freelist+0x10b5/0x2d50 mm/page_alloc.c:4288 __alloc_pages+0x1cb/0x5b0 mm/page_alloc.c:5555 alloc_pages+0x1aa/0x270 mm/mempolicy.c:2285 alloc_slab_page mm/slub.c:1794 [inline] allocate_slab+0x213/0x300 mm/slub.c:1939 new_slab mm/slub.c:1992 [inline] ___slab_alloc+0xa91/0x1400 mm/slub.c:3180 __slab_alloc.constprop.0+0x56/0xa0 mm/slub.c:3279 slab_alloc_node mm/slub.c:3364 [inline] slab_alloc mm/slub.c:3406 [inline] __kmem_cache_alloc_lru mm/slub.c:3413 [inline] kmem_cache_alloc+0x31a/0x3d0 mm/slub.c:3422 dst_alloc+0x14a/0x1f0 net/core/dst.c:92 ip6_dst_alloc+0x32/0xa0 net/ipv6/route.c:344 icmp6_dst_alloc+0x71/0x680 net/ipv6/route.c:3261 mld_sendpack+0x5de/0xe70 net/ipv6/mcast.c:1809 mld_send_cr net/ipv6/mcast.c:2121 [inline] mld_ifc_work+0x720/0xdc0 net/ipv6/mcast.c:2653 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306 page last free stack trace: reset_page_owner include/linux/page_owner.h:24 [inline] free_pages_prepare mm/page_alloc.c:1459 [inline] free_pcp_prepare+0x65c/0xd90 mm/page_alloc.c:1509 free_unref_page_prepare mm/page_alloc.c:3387 [inline] free_unref_page+0x1d/0x4d0 mm/page_alloc.c:3483 __unfreeze_partials+0x17c/0x1a0 mm/slub.c:2586 qlink_free mm/kasan/quarantine.c:168 [inline] qlist_free_all+0x6a/0x170 mm/kasan/quarantine.c:187 kasan_quarantine_reduce+0x184/0x210 mm/kasan/quarantine.c:294 __kasan_slab_alloc+0x66/0x90 mm/kasan/common.c:302 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slab.h:737 [inline] slab_alloc_node mm/slub.c:3398 [inline] kmem_cache_alloc_node+0x304/0x410 mm/slub.c:3443 __alloc_skb+0x214/0x300 net/core/skbuff.c:497 alloc_skb include/linux/skbuff.h:1267 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1191 [inline] netlink_sendmsg+0x9a6/0xe10 net/netlink/af_netlink.c:1896 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xd3/0x120 net/socket.c:734 __sys_sendto+0x23a/0x340 net/socket.c:2117 __do_sys_sendto net/socket.c:2129 [inline] __se_sys_sendto net/socket.c:2125 [inline] __x64_sys_sendto+0xe1/0x1b0 net/socket.c:2125 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 1758fd4688eb ("ipv6: remove unnecessary dst_hold() in ip6_fragment()") Reported-by: syzbot+8c0ac31aa9681abb9e2d@syzkaller.appspotmail.com Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/r/20221206101351.2037285-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: plip: don't call kfree_skb/dev_kfree_skb() under spin_lock_irq()Yang Yingliang1-2/+2
[ Upstream commit 7d8c19bfc8ff3f78e5337107ca9246327fcb6b45 ] It is not allowed to call kfree_skb() or consume_skb() from hardware interrupt context or with interrupts being disabled. So replace kfree_skb/dev_kfree_skb() with dev_kfree_skb_irq() and dev_consume_skb_irq() under spin_lock_irq(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20221207015310.2984909-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14xen/netback: fix build warningJuergen Gross1-1/+1
[ Upstream commit 7dfa764e0223a324366a2a1fc056d4d9d4e95491 ] Commit ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") introduced a (valid) build warning. There have even been reports of this problem breaking networking of Xen guests. Fixes: ad7f402ae4f4 ("xen/netback: Ensure protocol headers don't fall in the non-linear area") Signed-off-by: Juergen Gross <jgross@suse.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com> Tested-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ethernet: aeroflex: fix potential skb leak in greth_init_rings()Zhang Changzhong1-0/+1
[ Upstream commit 063a932b64db3317ec020c94466fe52923a15f60 ] The greth_init_rings() function won't free the newly allocated skb when dma_mapping_error() returns error, so add dev_kfree_skb() to fix it. Compile tested only. Fixes: d4c41139df6e ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/1670134149-29516-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ipv4: Fix incorrect route flushing when table ID 0 is usedIdo Schimmel1-0/+3
[ Upstream commit c0d999348e01df03e0a7f550351f3907fabbf611 ] Cited commit added the table ID to the FIB info structure, but did not properly initialize it when table ID 0 is used. This can lead to a route in the default VRF with a preferred source address not being flushed when the address is deleted. Consider the following example: # ip address add dev dummy1 192.0.2.1/28 # ip address add dev dummy1 192.0.2.17/28 # ip route add 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 100 # ip route add table 0 198.51.100.0/24 via 192.0.2.2 src 192.0.2.17 metric 200 # ip route show 198.51.100.0/24 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 100 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200 Both routes are installed in the default VRF, but they are using two different FIB info structures. One with a metric of 100 and table ID of 254 (main) and one with a metric of 200 and table ID of 0. Therefore, when the preferred source address is deleted from the default VRF, the second route is not flushed: # ip address del dev dummy1 192.0.2.17/28 # ip route show 198.51.100.0/24 198.51.100.0/24 via 192.0.2.2 dev dummy1 src 192.0.2.17 metric 200 Fix by storing a table ID of 254 instead of 0 in the route configuration structure. Add a test case that fails before the fix: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Table ID 0 TEST: Route removed in default VRF when source address deleted [FAIL] Tests passed: 8 Tests failed: 1 And passes after: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Table ID 0 TEST: Route removed in default VRF when source address deleted [ OK ] Tests passed: 9 Tests failed: 0 Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Reported-by: Donald Sharp <sharpd@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ipv4: Fix incorrect route flushing when source address is deletedIdo Schimmel2-1727/+1
[ Upstream commit f96a3d74554df537b6db5c99c27c80e7afadc8d1 ] Cited commit added the table ID to the FIB info structure, but did not prevent structures with different table IDs from being consolidated. This can lead to routes being flushed from a VRF when an address is deleted from a different VRF. Fix by taking the table ID into account when looking for a matching FIB info. This is already done for FIB info structures backed by a nexthop object in fib_find_info_nh(). Add test cases that fail before the fix: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [FAIL] TEST: Route in default VRF not removed [ OK ] RTNETLINK answers: File exists TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [FAIL] Tests passed: 6 Tests failed: 2 And pass after: # ./fib_tests.sh -t ipv4_del_addr IPv4 delete address route tests Regular FIB info TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Identical FIB info with different table ID TEST: Route removed from VRF when source address deleted [ OK ] TEST: Route in default VRF not removed [ OK ] TEST: Route removed in default VRF when source address deleted [ OK ] TEST: Route in VRF is not removed by address delete [ OK ] Tests passed: 8 Tests failed: 0 Fixes: 5a56a0b3a45d ("net: Don't delete routes in different VRFs") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14tipc: Fix potential OOB in tipc_link_proto_rcv()YueHaibing1-1/+3
[ Upstream commit 743117a997bbd4840e827295c07e59bcd7f7caa3 ] Fix the potential risk of OOB if skb_linearize() fails in tipc_link_proto_rcv(). Fixes: 5cbb28a4bf65 ("tipc: linearize arriving NAME_DISTR and LINK_PROTO buffers") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20221203094635.29024-1-yuehaibing@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: hisilicon: Fix potential use-after-free in hix5hd2_rx()Liu Jian1-1/+1
[ Upstream commit 433c07a13f59856e4585e89e86b7d4cc59348fab ] The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. Fixes: 57c5bc9ad7d7 ("net: hisilicon: add hix5hd2 mac driver") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20221203094240.1240211-2-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: hisilicon: Fix potential use-after-free in hisi_femac_rx()Liu Jian1-1/+1
[ Upstream commit 4640177049549de1a43e9bc49265f0cdfce08cfd ] The skb is delivered to napi_gro_receive() which may free it, after calling this, dereferencing skb may trigger use-after-free. Fixes: 542ae60af24f ("net: hisilicon: Add Fast Ethernet MAC driver") Signed-off-by: Liu Jian <liujian56@huawei.com> Link: https://lore.kernel.org/r/20221203094240.1240211-1-liujian56@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: thunderx: Fix missing destroy_workqueue of nicvf_rx_mode_wqYongqiang Liu1-1/+3
[ Upstream commit 42330a32933fb42180c52022804dcf09f47a2f99 ] The nicvf_probe() won't destroy workqueue when register_netdev() failed. Add destroy_workqueue err handle case to fix this issue. Fixes: 2ecbe4f4a027 ("net: thunderx: replace global nicvf_rx_mode_wq work queue for all VFs to private for each of them.") Signed-off-by: Yongqiang Liu <liuyongqiang13@huawei.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Link: https://lore.kernel.org/r/20221203094125.602812-1-liuyongqiang13@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: stmmac: fix "snps,axi-config" node property parsingJisheng Zhang1-4/+4
[ Upstream commit 61d4f140943c47c1386ed89f7260e00418dfad9d ] In dt-binding snps,dwmac.yaml, some properties under "snps,axi-config" node are named without "axi_" prefix, but the driver expects the prefix. Since the dt-binding has been there for a long time, we'd better make driver match the binding for compatibility. Fixes: afea03656add ("stmmac: rework DMA bus setting and introduce new platform AXI structure") Signed-off-by: Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20221202161739.2203-1-jszhang@kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14nvme initialize core quirks before calling nvme_init_subsystemPankaj Raghav1-4/+4
[ Upstream commit 6f2d71524bcfdeb1fcbd22a4a92a5b7b161ab224 ] A device might have a core quirk for NVME_QUIRK_IGNORE_DEV_SUBNQN (such as Samsung X5) but it would still give a: "missing or invalid SUBNQN field" warning as core quirks are filled after calling nvme_init_subnqn. Fill ctrl->quirks from struct core_quirks before calling nvme_init_subsystem to fix this. Tested on a Samsung X5. Fixes: ab9e00cc72fa ("nvme: track subsystems") Signed-off-by: Pankaj Raghav <p.raghav@samsung.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14NFC: nci: Bounds check struct nfc_target arraysKees Cook1-0/+6
[ Upstream commit e329e71013c9b5a4535b099208493c7826ee4a64 ] While running under CONFIG_FORTIFY_SOURCE=y, syzkaller reported: memcpy: detected field-spanning write (size 129) of single field "target->sensf_res" at net/nfc/nci/ntf.c:260 (size 18) This appears to be a legitimate lack of bounds checking in nci_add_new_protocol(). Add the missing checks. Reported-by: syzbot+210e196cef4711b65139@syzkaller.appspotmail.com Link: https://lore.kernel.org/lkml/0000000000001c590f05ee7b3ff4@google.com Fixes: 019c4fbaa790 ("NFC: Add NCI multiple targets support") Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221202214410.never.693-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14i40e: Disallow ip4 and ip6 l4_4_bytesPrzemyslaw Patynowski1-5/+1
[ Upstream commit d64aaf3f7869f915fd120763d75f11d6b116424d ] Return -EOPNOTSUPP, when user requests l4_4_bytes for raw IP4 or IP6 flow director filters. Flow director does not support filtering on l4 bytes for PCTYPEs used by IP4 and IP6 filters. Without this patch, user could create filters with l4_4_bytes fields, which did not do any filtering on L4, but only on L3 fields. Fixes: 36777d9fa24c ("i40e: check current configured input set when adding ntuple filters") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14i40e: Fix for VF MAC address 0Sylwester Dziedziuch1-0/+2
[ Upstream commit 08501970472077ed5de346ad89943a37d1692e9b ] After spawning max VFs on a PF, some VFs were not getting resources and their MAC addresses were 0. This was caused by PF sleeping before flushing HW registers which caused VIRTCHNL_VFR_VFACTIVE to not be set in time for VF. Fix by adding a sleep after hw flush. Fixes: e4b433f4a741 ("i40e: reset all VFs in parallel when rebuilding PF") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14i40e: Fix not setting default xps_cpus after resetMichal Jaron1-1/+18
[ Upstream commit 82e0572b23029b380464fa9fdc125db9c1506d0a ] During tx rings configuration default XPS queue config is set and __I40E_TX_XPS_INIT_DONE is locked. __I40E_TX_XPS_INIT_DONE state is cleared and set again with default mapping only during queues build, it means after first setup or reset with queues rebuild. (i.e. ethtool -L <interface> combined <number>) After other resets (i.e. ethtool -t <interface>) XPS_INIT_DONE is not cleared and those default maps cannot be set again. It results in cleared xps_cpus mapping until queues are not rebuild or mapping is not set by user. Add clearing __I40E_TX_XPS_INIT_DONE state during reset to let the driver set xps_cpus to defaults again after it was cleared. Fixes: 6f853d4f8e93 ("i40e: allow XPS with QoS enabled") Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Kamil Maziarz <kamil.maziarz@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: mvneta: Prevent out of bounds read in mvneta_config_rss()Dan Carpenter1-0/+3
[ Upstream commit e8b4fc13900b8e8be48debffd0dfd391772501f7 ] The pp->indir[0] value comes from the user. It is passed to: if (cpu_online(pp->rxq_def)) inside the mvneta_percpu_elect() function. It needs bounds checkeding to ensure that it is not beyond the end of the cpu bitmap. Fixes: cad5d847a093 ("net: mvneta: Fix the CPU choice in mvneta_percpu_elect") Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14xen-netfront: Fix NULL sring after live migrationLin Liu1-0/+6
[ Upstream commit d50b7914fae04d840ce36491d22133070b18cca9 ] A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time Signed-off-by: Lin Liu <lin.liu@citrix.com> Fixes: 4ec2411980d0 ([NET]: Do not check netif_running() and carrier state in ->poll()) Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: encx24j600: Fix invalid logic in reading of MISTAT registerValentina Goncharenko1-2/+2
[ Upstream commit 25f427ac7b8d89b0259f86c0c6407b329df742b2 ] A loop for reading MISTAT register continues while regmap_read() fails and (mistat & BUSY), but if regmap_read() fails a value of mistat is undefined. The patch proposes to check for BUSY flag only when regmap_read() succeed. Compile test only. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d70e53262f5c ("net: Microchip encx24j600 driver") Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: encx24j600: Add parentheses to fix precedenceValentina Goncharenko1-2/+2
[ Upstream commit 167b3f2dcc62c271f3555b33df17e361bb1fa0ee ] In functions regmap_encx24j600_phy_reg_read() and regmap_encx24j600_phy_reg_write() in the conditions of the waiting cycles for filling the variable 'ret' it is necessary to add parentheses to prevent wrong assignment due to logical operations precedence. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: d70e53262f5c ("net: Microchip encx24j600 driver") Signed-off-by: Valentina Goncharenko <goncharenko.vp@ispras.ru> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14mac802154: fix missing INIT_LIST_HEAD in ieee802154_if_add()Wei Yongjun1-0/+1
[ Upstream commit b3d72d3135d2ef68296c1ee174436efd65386f04 ] Kernel fault injection test reports null-ptr-deref as follows: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:cfg802154_netdev_notifier_call+0x120/0x310 include/linux/list.h:114 Call Trace: <TASK> raw_notifier_call_chain+0x6d/0xa0 kernel/notifier.c:87 call_netdevice_notifiers_info+0x6e/0xc0 net/core/dev.c:1944 unregister_netdevice_many_notify+0x60d/0xcb0 net/core/dev.c:1982 unregister_netdevice_queue+0x154/0x1a0 net/core/dev.c:10879 register_netdevice+0x9a8/0xb90 net/core/dev.c:10083 ieee802154_if_add+0x6ed/0x7e0 net/mac802154/iface.c:659 ieee802154_register_hw+0x29c/0x330 net/mac802154/main.c:229 mcr20a_probe+0xaaa/0xcb1 drivers/net/ieee802154/mcr20a.c:1316 ieee802154_if_add() allocates wpan_dev as netdev's private data, but not init the list in struct wpan_dev. cfg802154_netdev_notifier_call() manage the list when device register/unregister, and may lead to null-ptr-deref. Use INIT_LIST_HEAD() on it to initialize it correctly. Fixes: fcf39e6e88e9 ("ieee802154: add wpan_dev_list") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221130091705.1831140-1-weiyongjun@huaweicloud.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14selftests: rtnetlink: correct xfrm policy rule in kci_test_ipsec_offloadZhengchao Shao1-1/+1
[ Upstream commit 85a0506c073332a3057f5a9635fa0d4db5a8e03b ] When testing in kci_test_ipsec_offload, srcip is configured as $dstip, it should add xfrm policy rule in instead of out. The test result of this patch is as follows: PASS: ipsec_offload Fixes: 2766a11161cc ("selftests: rtnetlink: add ipsec offload API test") Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Acked-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20221201082246.14131-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14net: dsa: ksz: Check return valueArtem Chernyshev1-1/+2
[ Upstream commit 3d8fdcbf1f42e2bb9ae8b8c0b6f202278c788a22 ] Return NULL if we got unexpected value from skb_trim_rcsum() in ksz_common_rcv() Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: bafe9ba7d908 ("net: dsa: ksz: Factor out common tag code") Signed-off-by: Artem Chernyshev <artem.chernyshev@red-soft.ru> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221201140032.26746-1-artem.chernyshev@red-soft.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14Bluetooth: Fix not cleanup led when bt_init failsChen Zhongjin1-1/+3
[ Upstream commit 2f3957c7eb4e07df944169a3e50a4d6790e1c744 ] bt_init() calls bt_leds_init() to register led, but if it fails later, bt_leds_cleanup() is not called to unregister it. This can cause panic if the argument "bluetooth-power" in text is freed and then another led_trigger_register() tries to access it: BUG: unable to handle page fault for address: ffffffffc06d3bc0 RIP: 0010:strcmp+0xc/0x30 Call Trace: <TASK> led_trigger_register+0x10d/0x4f0 led_trigger_register_simple+0x7d/0x100 bt_init+0x39/0xf7 [bluetooth] do_one_initcall+0xd0/0x4e0 Fixes: e64c97b53bc6 ("Bluetooth: Add combined LED trigger for controller power") Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14Bluetooth: 6LoWPAN: add missing hci_dev_put() in get_l2cap_conn()Wang ShaoBo1-0/+1
[ Upstream commit 747da1308bdd5021409974f9180f0d8ece53d142 ] hci_get_route() takes reference, we should use hci_dev_put() to release it when not need anymore. Fixes: 6b8d4a6a0314 ("Bluetooth: 6LoWPAN: Use connected oriented channel instead of fixed one") Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14af_unix: Get user_ns from in_skb in unix_diag_get_exact().Kuniyuki Iwashima1-8/+12
[ Upstream commit b3abe42e94900bdd045c472f9c9be620ba5ce553 ] Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/ Fixes: cae9910e7344 ("net: Add UNIX_DIAG_UID to Netlink UNIX socket diagnostics.") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Wei Chen <harperchen1110@gmail.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14igb: Allocate MSI-X vector when testingAkihiko Odaki1-0/+2
[ Upstream commit 28e96556baca7056d11d9fb3cdd0aba4483e00d8 ] Without this change, the interrupt test fail with MSI-X environment: $ sudo ethtool -t enp0s2 offline [ 43.921783] igb 0000:00:02.0: offline testing starting [ 44.855824] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Down [ 44.961249] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 51.272202] igb 0000:00:02.0: testing shared interrupt [ 56.996975] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is FAIL The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 4 Loopback test (offline) 0 Link test (on/offline) 0 Here, "4" means an expected interrupt was not delivered. To fix this, route IRQs correctly to the first MSI-X vector by setting IVAR_MISC. Also, set bit 0 of EIMS so that the vector will not be masked. The interrupt test now runs properly with this change: $ sudo ethtool -t enp0s2 offline [ 42.762985] igb 0000:00:02.0: offline testing starting [ 50.141967] igb 0000:00:02.0: testing shared interrupt [ 56.163957] igb 0000:00:02.0 enp0s2: igb: enp0s2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX The test result is PASS The test extra info: Register test (offline) 0 Eeprom test (offline) 0 Interrupt test (offline) 0 Loopback test (offline) 0 Link test (on/offline) 0 Fixes: 4eefa8f01314 ("igb: add single vector msi-x testing to interrupt test") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14e1000e: Fix TX dispatch conditionAkihiko Odaki1-2/+2
[ Upstream commit eed913f6919e253f35d454b2f115f2a4db2b741a ] e1000_xmit_frame is expected to stop the queue and dispatch frames to hardware if there is not sufficient space for the next frame in the buffer, but sometimes it failed to do so because the estimated maximum size of frame was wrong. As the consequence, the later invocation of e1000_xmit_frame failed with NETDEV_TX_BUSY, and the frame in the buffer remained forever, resulting in a watchdog failure. This change fixes the estimated size by making it match with the condition for NETDEV_TX_BUSY. Apparently, the old estimation failed to account for the following lines which determines the space requirement for not causing NETDEV_TX_BUSY: ``` /* reserve a descriptor for the offload context */ if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL)) count++; count++; count += DIV_ROUND_UP(len, adapter->tx_fifo_limit); ``` This issue was found when running http-stress02 test included in Linux Test Project 20220930 on QEMU with the following commandline: ``` qemu-system-x86_64 -M q35,accel=kvm -m 8G -smp 8 -drive if=virtio,format=raw,file=root.img,file.locking=on -device e1000e,netdev=netdev -netdev tap,script=ifup,downscript=no,id=netdev ``` Fixes: bc7f75fa9788 ("[E1000E]: New pci-express e1000 driver (currently for ICH9 devices only)") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14gpio: amd8111: Fix PCI device reference count leakXiongfeng Wang1-0/+4
[ Upstream commit 45fecdb9f658d9c82960c98240bc0770ade19aca ] for_each_pci_dev() is implemented by pci_get_device(). The comment of pci_get_device() says that it will increase the reference count for the returned pci_dev and also decrease the reference count for the input pci_dev @from if it is not NULL. If we break for_each_pci_dev() loop with pdev not NULL, we need to call pci_dev_put() to decrease the reference count. Add the missing pci_dev_put() after the 'out' label. Since pci_dev_put() can handle NULL input parameter, there is no problem for the 'Device not found' branch. For the normal path, add pci_dev_put() in amd_gpio_exit(). Fixes: f942a7de047d ("gpio: add a driver for GPIO pins found on AMD-8111 south bridge chips") Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14drm/bridge: ti-sn65dsi86: Fix output polarity setting bugQiqi Zhang1-2/+2
[ Upstream commit 8c115864501fc09932cdfec53d9ec1cde82b4a28 ] According to the description in ti-sn65dsi86's datasheet: CHA_HSYNC_POLARITY: 0 = Active High Pulse. Synchronization signal is high for the sync pulse width. (default) 1 = Active Low Pulse. Synchronization signal is low for the sync pulse width. CHA_VSYNC_POLARITY: 0 = Active High Pulse. Synchronization signal is high for the sync pulse width. (Default) 1 = Active Low Pulse. Synchronization signal is low for the sync pulse width. We should only set these bits when the polarity is negative. Fixes: a095f15c00e2 ("drm/bridge: add support for sn65dsi86 bridge driver") Signed-off-by: Qiqi Zhang <eddy.zhang@rock-chips.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Tested-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20221125104558.84616-1-eddy.zhang@rock-chips.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ca8210: Fix crash by zero initializing dataHauke Mehrtens1-1/+1
[ Upstream commit 1e24c54da257ab93cff5826be8a793b014a5dc9c ] The struct cas_control embeds multiple generic SPI structures and we have to make sure these structures are initialized to default values. This driver does not set all attributes. When using kmalloc before some attributes were not initialized and contained random data which caused random crashes at bootup. Fixes: ded845a781a5 ("ieee802154: Add CA8210 IEEE 802.15.4 device driver") Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Link: https://lore.kernel.org/r/20221121002201.1339636-1-hauke@hauke-m.de Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14ieee802154: cc2520: Fix error return code in cc2520_hw_init()Ziyang Xuan1-1/+1
[ Upstream commit 4d002d6a2a00ac1c433899bd7625c6400a74cfba ] In cc2520_hw_init(), if oscillator start failed, the error code should be returned. Fixes: 0da6bc8cc341 ("ieee802154: cc2520: adds driver for TI CC2520 radio") Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com> Link: https://lore.kernel.org/r/20221120075046.2213633-1-william.xuanziyang@huawei.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-12-14can: af_can: fix NULL pointer dereference in can_rcv_filterOliver Hartkopp1-2/+2
commit 0acc442309a0a1b01bcdaa135e56e6398a49439c upstream. Analogue to commit 8aa59e355949 ("can: af_can: fix NULL pointer dereference in can_rx_register()") we need to check for a missing initialization of ml_priv in the receive path of CAN frames. Since commit 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") the check for dev->type to be ARPHRD_CAN is not sufficient anymore since bonding or tun netdevices claim to be CAN devices but do not initialize ml_priv accordingly. Fixes: 4e096a18867a ("net: introduce CAN specific pointer in the struct net_device") Reported-by: syzbot+2d7f58292cb5b29eb5ad@syzkaller.appspotmail.com Reported-by: Wei Chen <harperchen1110@gmail.com> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/all/20221206201259.3028-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14HID: core: fix shift-out-of-bounds in hid_report_raw_eventZhangPeng1-0/+3
commit ec61b41918587be530398b0d1c9a0d16619397e5 upstream. Syzbot reported shift-out-of-bounds in hid_report_raw_event. microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) > 32! (swapper/0) ====================================================================== UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20 shift exponent 127 is too large for 32-bit type 'int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322 snto32 drivers/hid/hid-core.c:1323 [inline] hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline] hid_process_report drivers/hid/hid-core.c:1665 [inline] hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998 hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066 hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284 __usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671 dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers+0x76a/0x980 kernel/time/timer.c:1790 run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803 __do_softirq+0x277/0x75b kernel/softirq.c:571 __irq_exit_rcu+0xec/0x170 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107 ====================================================================== If the size of the integer (unsigned n) is bigger than 32 in snto32(), shift exponent will be too large for 32-bit type 'int', resulting in a shift-out-of-bounds bug. Fix this by adding a check on the size of the integer (unsigned n) in snto32(). To add support for n greater than 32 bits, set n to 32, if n is greater than 32. Reported-by: syzbot+8b1641d2f14732407e23@syzkaller.appspotmail.com Fixes: dde5845a529f ("[PATCH] Generic HID layer - code split") Signed-off-by: ZhangPeng <zhangpeng362@huawei.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14HID: hid-lg4ff: Add check for empty lbufAnastasia Belova1-0/+6
commit d180b6496143cd360c5d5f58ae4b9a8229c1f344 upstream. If an empty buf is received, lbuf is also empty. So lbuf is accessed by index -1. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: f31a2de3fe36 ("HID: hid-lg4ff: Allow switching of Logitech gaming wheels between compatibility modes") Signed-off-by: Anastasia Belova <abelova@astralinux.ru> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-12-14HID: usbhid: Add ALWAYS_POLL quirk for some miceAnkit Patel2-0/+6
commit f6d910a89a2391e5ce1f275d205023880a33d3f8 upstream. Some additional USB mouse devices are needing ALWAYS_POLL quirk without which they disconnect and reconnect every 60s. Add below devices to the known quirk list. CHERRY VID 0x046a, PID 0x000c MICROSOFT VID 0x045e, PID 0x0783 PRIMAX VID 0x0461, PID 0x4e2a Signed-off-by: Ankit Patel <anpatel@nvidia.com> Signed-off-by: Haotien Hsu <haotienh@nvidia.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-12 20:19:31 +0300