summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-07-21Linux 5.4.207v5.4.207Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220719114552.477018590@linuxfoundation.org Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Hulk Robot <hulkrobot@huawei.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21can: m_can: m_can_tx_handler(): fix use after free of skbMarc Kleine-Budde1-2/+3
commit 2e8e79c416aae1de224c0f1860f2e3350fa171f8 upstream. can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch. Fixes: 80646733f11c ("can: m_can: update to support CAN FD features") Link: https://lore.kernel.org/all/20220317081305.739554-1-mkl@pengutronix.de Cc: stable@vger.kernel.org Reported-by: Hangyu Hua <hbh25y@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> [sudip: adjust context] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottleIlpo Järvinen1-2/+21
commit 211565b100993c90b53bf40851eacaefc830cfe0 upstream. The driver must provide throttle and unthrottle in uart_ops when it sets UPSTAT_AUTORTS. Add them using existing stop_rx & enable_interrupts functions. Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status) Cc: stable <stable@kernel.org> Cc: Lukas Wunner <lukas@wunner.de> Reported-by: Nuno Gonçalves <nunojpg@gmail.com> Tested-by: Nuno Gonçalves <nunojpg@gmail.com> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21serial: stm32: Clear prev values before setting RTS delaysIlpo Järvinen1-0/+2
commit 5c5f44e36217de5ead789ff25da71c31c2331c96 upstream. The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though). Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode") Cc: stable <stable@kernel.org> Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21serial: 8250: fix return error code in serial8250_request_std_resource()Yi Yang1-1/+3
commit 6e690d54cfa802f939cefbd2fa2c91bd0b8bd1b6 upstream. If port->mapbase = NULL in serial8250_request_std_resource() , it need return a error code instead of 0. If uart_set_info() fail to request new regions by serial8250_request_std_resource() but the return value of serial8250_request_std_resource() is 0, The system incorrectly considers that the resource application is successful and does not attempt to restore the old setting. A null pointer reference is triggered when the port resource is later invoked. Signed-off-by: Yi Yang <yiyang13@huawei.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21tty: serial: samsung_tty: set dma burst_size to 1Chanho Park1-3/+2
commit f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 upstream. The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable <stable@kernel.org> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Chanho Park <chanho61.park@samsung.com> Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21usb: dwc3: gadget: Fix event pending checkThinh Nguyen1-1/+3
commit 7441b273388b9a59d8387a03ffbbca9d5af6348c upstream. The DWC3_EVENT_PENDING flag is used to protect against invalid call to top-half interrupt handler, which can occur when there's a delay in software detection of the interrupt line deassertion. However, the clearing of this flag was done prior to unmasking the interrupt line, creating opportunity where the top-half handler can come. This breaks the serialization and creates a race between the top-half and bottom-half handler, resulting in losing synchronization between the controller and the driver when processing events. To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at the end of the bottom-half handler. Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21usb: typec: add missing uevent when partner support PDLinyu Yuan1-0/+1
commit 6fb9e1d94789e8ee5a258a23bc588693f743fd6c upstream. System like Android allow user control power role from UI, it is possible to implement application base on typec uevent to refresh UI, but found there is chance that UI show different state from typec attribute file. In typec_set_pwr_opmode(), when partner support PD, there is no uevent send to user space which cause the problem. Fix it by sending uevent notification when change power mode to PD. Fixes: bdecb33af34f ("usb: typec: API for controlling USB Type-C Multiplexers") Cc: stable@vger.kernel.org Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com> Link: https://lore.kernel.org/r/1656662934-10226-1-git-send-email-quic_linyyuan@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21USB: serial: ftdi_sio: add Belimo device idsLucien Buchmann2-0/+9
commit 7c239a071d1f04b7137789810807b4108d475c72 upstream. Those two product ids are known. Signed-off-by: Lucien Buchmann <lucien.buchmann@gmx.net> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-07-21signal handling: don't use BUG_ON() for debuggingLinus Torvalds1-4/+4
[ Upstream commit a382f8fee42ca10c9bfce0d2352d4153f931f5dc ] These are indeed "should not happen" situations, but it turns out recent changes made the 'task_is_stopped_or_trace()' case trigger (fix for that exists, is pending more testing), and the BUG_ON() makes it unnecessarily hard to actually debug for no good reason. It's been that way for a long time, but let's make it clear: BUG_ON() is not good for debugging, and should never be used in situations where you could just say "this shouldn't happen, but we can continue". Use WARN_ON_ONCE() instead to make sure it gets logged, and then just continue running. Instead of making the system basically unusuable because you crashed the machine while potentially holding some very core locks (eg this function is commonly called while holding 'tasklist_lock' for writing). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ARM: dts: stm32: use the correct clock source for CEC on stm32mp151Gabriel Fernandez1-1/+1
[ Upstream commit 78ece8cce1ba0c3f3e5a7c6c1b914b3794f04c44 ] The peripheral clock of CEC is not LSE but CEC. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21soc: ixp4xx/npe: Fix unused match warningLinus Walleij1-1/+1
[ Upstream commit 620f83b8326ce9706b1118334f0257ae028ce045 ] The kernel test robot found this inconsistency: drivers/soc/ixp4xx/ixp4xx-npe.c:737:34: warning: 'ixp4xx_npe_of_match' defined but not used [-Wunused-const-variable=] 737 | static const struct of_device_id ixp4xx_npe_of_match[] = { This is because the match is enclosed in the of_match_ptr() which compiles into NULL when OF is disabled and this is unnecessary. Fix it by dropping of_match_ptr() around the match. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20220626074315.61209-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21x86: Clear .brk area at early bootJuergen Gross1-0/+2
[ Upstream commit 38fa5479b41376dc9d7f57e71c83514285a25ca0 ] The .brk section has the same properties as .bss: it is an alloc-only section and should be cleared before being used. Not doing so is especially a problem for Xen PV guests, as the hypervisor will validate page tables (check for writable page tables and hypervisor private bits) before accepting them to be used. Make sure .brk is initially zero by letting clear_bss() clear the brk area, too. Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Link: https://lore.kernel.org/r/20220630071441.28576-3-jgross@suse.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21irqchip: or1k-pic: Undefine mask_ack for level triggered hardwareStafford Horne1-1/+0
[ Upstream commit 8520501346ed8d1c4a6dfa751cb57328a9c843f1 ] The mask_ack operation clears the interrupt by writing to the PICSR register. This we don't want for level triggered interrupt because it does not actually clear the interrupt on the source hardware. This was causing issues in qemu with multi core setups where interrupts would continue to fire even though they had been cleared in PICSR. Just remove the mask_ack operation. Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ASoC: madera: Fix event generation for rate controlsCharles Keepax1-3/+3
[ Upstream commit 980555e95f7cabdc9c80a07107622b097ba23703 ] madera_adsp_rate_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-5-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ASoC: madera: Fix event generation for OUT1 demuxCharles Keepax1-1/+7
[ Upstream commit e3cabbef3db8269207a6b8808f510137669f8deb ] madera_out1_demux_put returns the value of snd_soc_dapm_mux_update_power, which returns a 1 if a path was found for the kcontrol. This is obviously different to the expected return a 1 if the control was updated value. This results in spurious notifications to user-space. Update the handling to only return a 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ASoC: cs47l15: Fix event generation for low power mux controlCharles Keepax1-1/+4
[ Upstream commit 7f103af4a10f375b9b346b4d0b730f6a66b8c451 ] cs47l15_in1_adc_put always returns zero regardless of if the control value was updated. This results in missing notifications to user-space of the control change. Update the handling to return 1 when the value is changed. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220623105120.1981154-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ASoC: wm5110: Fix DRE controlCharles Keepax1-2/+6
[ Upstream commit 0bc0ae9a5938d512fd5d44f11c9c04892dcf4961 ] The DRE controls on wm5110 should return a value of 1 if the DRE state is actually changed, update to fix this. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220621102041.1713504-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ASoC: ops: Fix off by one in range control validationMark Brown1-2/+2
[ Upstream commit 5871321fb4558c55bf9567052b618ff0be6b975e ] We currently report that range controls accept a range of 0..(max-min) but accept writes in the range 0..(max-min+1). Remove that extra +1. Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220604105246.4055214-1-broonie@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21net: sfp: fix memory leak in sfp_probe()Jianglei Nie1-1/+1
[ Upstream commit 0a18d802d65cf662644fd1d369c86d84a5630652 ] sfp_probe() allocates a memory chunk from sfp with sfp_alloc(). When devm_add_action() fails, sfp is not freed, which leads to a memory leak. We should use devm_add_action_or_reset() instead of devm_add_action(). Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/20220629075550.2152003-1-niejianglei2021@163.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21nvme: fix regression when disconnect a recovering ctrlRuozhu Li4-6/+19
[ Upstream commit f7f70f4aa09dc43d7455c060143e86a017c30548 ] We encountered a problem that the disconnect command hangs. After analyzing the log and stack, we found that the triggering process is as follows: CPU0 CPU1 nvme_rdma_error_recovery_work nvme_rdma_teardown_io_queues nvme_do_delete_ctrl nvme_stop_queues nvme_remove_namespaces --clear ctrl->namespaces nvme_start_queues --no ns in ctrl->namespaces nvme_ns_remove return(because ctrl is deleting) blk_freeze_queue blk_mq_freeze_queue_wait --wait for ns to unquiesce to clean infligt IO, hang forever This problem was not found in older kernels because we will flush err work in nvme_stop_ctrl before nvme_remove_namespaces.It does not seem to be modified for functional reasons, the patch can be revert to solve the problem. Revert commit 794a4cb3d2f7 ("nvme: remove the .stop_ctrl callout") Signed-off-by: Ruozhu Li <liruozhu@huawei.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21NFC: nxp-nci: don't print header length mismatch on i2c errorMichael Walle1-2/+6
[ Upstream commit 9577fc5fdc8b07b891709af6453545db405e24ad ] Don't print a misleading header length mismatch error if the i2c call returns an error. Instead just return the error code without any error message. Signed-off-by: Michael Walle <michael@walle.cc> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21net: tipc: fix possible refcount leak in tipc_sk_create()Hangyu Hua1-0/+1
[ Upstream commit 00aff3590fc0a73bddd3b743863c14e76fd35c0c ] Free sk in case tipc_sk_insert() fails. Signed-off-by: Hangyu Hua <hbh25y@gmail.com> Reviewed-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21platform/x86: hp-wmi: Ignore Sanitization Mode eventKai-Heng Feng1-0/+3
[ Upstream commit 9ab762a84b8094540c18a170e5ddd6488632c456 ] After system resume the hp-wmi driver may complain: [ 702.620180] hp_wmi: Unknown event_id - 23 - 0x0 According to HP it means 'Sanitization Mode' and it's harmless to just ignore the event. Cc: Jorge Lopez <jorge.lopez2@hp.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Link: https://lore.kernel.org/r/20220628123726.250062-1-kai.heng.feng@canonical.com Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21cpufreq: pmac32-cpufreq: Fix refcount leak bugLiang He1-0/+4
[ Upstream commit ccd7567d4b6cf187fdfa55f003a9e461ee629e36 ] In pmac_cpufreq_init_MacRISC3(), we need to add corresponding of_node_put() for the three node pointers whose refcount have been incremented by of_find_node_by_name(). Signed-off-by: Liang He <windhl@126.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21netfilter: br_netfilter: do not skip all hooks with 0 priorityFlorian Westphal1-3/+18
[ Upstream commit c2577862eeb0be94f151f2f1fff662b028061b00 ] When br_netfilter module is loaded, skbs may be diverted to the ipv4/ipv6 hooks, just like as if we were routing. Unfortunately, bridge filter hooks with priority 0 may be skipped in this case. Example: 1. an nftables bridge ruleset is loaded, with a prerouting hook that has priority 0. 2. interface is added to the bridge. 3. no tcp packet is ever seen by the bridge prerouting hook. 4. flush the ruleset 5. load the bridge ruleset again. 6. tcp packets are processed as expected. After 1) the only registered hook is the bridge prerouting hook, but its not called yet because the bridge hasn't been brought up yet. After 2), hook order is: 0 br_nf_pre_routing // br_netfilter internal hook 0 chain bridge f prerouting // nftables bridge ruleset The packet is diverted to br_nf_pre_routing. If call-iptables is off, the nftables bridge ruleset is called as expected. But if its enabled, br_nf_hook_thresh() will skip it because it assumes that all 0-priority hooks had been called previously in bridge context. To avoid this, check for the br_nf_pre_routing hook itself, we need to resume directly after it, even if this hook has a priority of 0. Unfortunately, this still results in different packet flow. With this fix, the eval order after in 3) is: 1. br_nf_pre_routing 2. ip(6)tables (if enabled) 3. nftables bridge but after 5 its the much saner: 1. nftables bridge 2. br_nf_pre_routing 3. ip(6)tables (if enabled) Unfortunately I don't see a solution here: It would be possible to move br_nf_pre_routing to a higher priority so that it will be called later in the pipeline, but this also impacts ebtables evaluation order, and would still result in this very ordering problem for all nftables-bridge hooks with the same priority as the br_nf_pre_routing one. Searching back through the git history I don't think this has ever behaved in any other way, hence, no fixes-tag. Reported-by: Radim Hrazdil <rhrazdil@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21virtio_mmio: Restore guest page size on resumeStephan Gerhold1-0/+3
[ Upstream commit e0c2ce8217955537dd5434baeba061f209797119 ] Virtio devices might lose their state when the VMM is restarted after a suspend to disk (hibernation) cycle. This means that the guest page size register must be restored for the virtio_mmio legacy interface, since otherwise the virtio queues are not functional. This is particularly problematic for QEMU that currently still defaults to using the legacy interface for virtio_mmio. Write the guest page size register again in virtio_mmio_restore() to make legacy virtio_mmio devices work correctly after hibernation. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Message-Id: <20220621110621.3638025-3-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21virtio_mmio: Add missing PM calls to freeze/restoreStephan Gerhold1-0/+23
[ Upstream commit ed7ac37fde33ccd84e4bd2b9363c191f925364c7 ] Most virtio drivers provide freeze/restore callbacks to finish up device usage before suspend and to reinitialize the virtio device after resume. However, these callbacks are currently only called when using virtio_pci. virtio_mmio does not have any PM ops defined. This causes problems for example after suspend to disk (hibernation), since the virtio devices might lose their state after the VMM is restarted. Calling virtio_device_freeze()/restore() ensures that the virtio devices are re-initialized correctly. Fix this by implementing the dev_pm_ops for virtio_mmio, similar to virtio_pci_common. Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com> Message-Id: <20220621110621.3638025-2-stephan.gerhold@kernkonzept.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21mm: sysctl: fix missing numa_stat when !CONFIG_HUGETLB_PAGEMuchun Song1-9/+11
[ Upstream commit 43b5240ca6b33108998810593248186b1e3ae34a ] "numa_stat" should not be included in the scope of CONFIG_HUGETLB_PAGE, if CONFIG_HUGETLB_PAGE is not configured even if CONFIG_NUMA is configured, "numa_stat" is missed form /proc. Move it out of CONFIG_HUGETLB_PAGE to fix it. Fixes: 4518085e127d ("mm, sysctl: make NUMA stats configurable") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: <stable@vger.kernel.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21sfc: fix kernel panic when creating VFÍñigo Huguet1-0/+3
[ Upstream commit ada74c5539eba06cf8b47d068f92e0b3963a9a6e ] When creating VFs a kernel panic can happen when calling to efx_ef10_try_update_nic_stats_vf. When releasing a DMA coherent buffer, sometimes, I don't know in what specific circumstances, it has to unmap memory with vunmap. It is disallowed to do that in IRQ context or with BH disabled. Otherwise, we hit this line in vunmap, causing the crash: BUG_ON(in_interrupt()); This patch reenables BH to release the buffer. Log messages when the bug is hit: kernel BUG at mm/vmalloc.c:2727! invalid opcode: 0000 [#1] PREEMPT SMP NOPTI CPU: 6 PID: 1462 Comm: NetworkManager Kdump: loaded Tainted: G I --------- --- 5.14.0-119.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:vunmap+0x2e/0x30 ...skip... Call Trace: __iommu_dma_free+0x96/0x100 efx_nic_free_buffer+0x2b/0x40 [sfc] efx_ef10_try_update_nic_stats_vf+0x14a/0x1c0 [sfc] efx_ef10_update_stats_vf+0x18/0x40 [sfc] efx_start_all+0x15e/0x1d0 [sfc] efx_net_open+0x5a/0xe0 [sfc] __dev_open+0xe7/0x1a0 __dev_change_flags+0x1d7/0x240 dev_change_flags+0x21/0x60 ...skip... Fixes: d778819609a2 ("sfc: DMA the VF stats only when requested") Reported-by: Ma Yuying <yuma@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220713092116.21238-1-ihuguet@redhat.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21seg6: bpf: fix skb checksum in bpf_push_seg6_encap()Andrea Mayer1-1/+0
[ Upstream commit 4889fbd98deaf243c3baadc54e296d71c6af1eb0 ] Both helper functions bpf_lwt_seg6_action() and bpf_lwt_push_encap() use the bpf_push_seg6_encap() to encapsulate the packet in an IPv6 with Segment Routing Header (SRH) or insert an SRH between the IPv6 header and the payload. To achieve this result, such helper functions rely on bpf_push_seg6_encap() which, in turn, leverages seg6_do_srh_{encap,inline}() to perform the required operation (i.e. encap/inline). This patch removes the initialization of the IPv6 header payload length from bpf_push_seg6_encap(), as it is now handled properly by seg6_do_srh_{encap,inline}() to prevent corruption of the skb checksum. Fixes: fe94cc290f53 ("bpf: Add IPv6 Segment Routing helpers") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21seg6: fix skb checksum in SRv6 End.B6 and End.B6.Encaps behaviorsAndrea Mayer1-2/+0
[ Upstream commit f048880fc77058d864aff5c674af7918b30f312a ] The SRv6 End.B6 and End.B6.Encaps behaviors rely on functions seg6_do_srh_{encap,inline}() to, respectively: i) encapsulate the packet within an outer IPv6 header with the specified Segment Routing Header (SRH); ii) insert the specified SRH directly after the IPv6 header of the packet. This patch removes the initialization of the IPv6 header payload length from the input_action_end_b6{_encap}() functions, as it is now handled properly by seg6_do_srh_{encap,inline}() to avoid corruption of the skb checksum. Fixes: 140f04c33bbc ("ipv6: sr: implement several seg6local actions") Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21seg6: fix skb checksum evaluation in SRH encapsulation/insertionAndrea Mayer1-1/+4
[ Upstream commit df8386d13ea280d55beee1b95f61a59234a3798b ] Support for SRH encapsulation and insertion was introduced with commit 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels"), through the seg6_do_srh_encap() and seg6_do_srh_inline() functions, respectively. The former encapsulates the packet in an outer IPv6 header along with the SRH, while the latter inserts the SRH between the IPv6 header and the payload. Then, the headers are initialized/updated according to the operating mode (i.e., encap/inline). Finally, the skb checksum is calculated to reflect the changes applied to the headers. The IPv6 payload length ('payload_len') is not initialized within seg6_do_srh_{inline,encap}() but is deferred in seg6_do_srh(), i.e. the caller of seg6_do_srh_{inline,encap}(). However, this operation invalidates the skb checksum, since the 'payload_len' is updated only after the checksum is evaluated. To solve this issue, the initialization of the IPv6 payload length is moved from seg6_do_srh() directly into the seg6_do_srh_{inline,encap}() functions and before the skb checksum update takes place. Fixes: 6c8702c60b88 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels") Reported-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/all/20220705190727.69d532417be7438b15404ee1@uniroma2.it Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21sfc: fix use after free when disabling sriovÍñigo Huguet1-3/+7
[ Upstream commit ebe41da5d47ac0fff877e57bd14c54dccf168827 ] Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching. Set the pointer to NULL at release time to not trying to read it later. Reproducer and dmesg log (note that kfence doesn't detect it every time): $ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs $ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224): efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] efx_ef10_pci_sriov_disable+0x38/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k allocated by task 6771 on cpu 10 at 3137.860196s: pci_alloc_dev+0x21/0x60 pci_iov_add_virtfn+0x2a2/0x320 sriov_enable+0x212/0x3e0 efx_ef10_sriov_configure+0x67/0x80 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xba/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae freed by task 6771 on cpu 12 at 3170.991309s: device_release+0x34/0x90 kobject_cleanup+0x3a/0x130 pci_iov_remove_virtfn+0xd9/0x120 sriov_disable+0x30/0xe0 efx_ef10_pci_sriov_disable+0x57/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 3c5eb87605e85 ("sfc: create vports for VFs and assign random MAC addresses") Reported-by: Yanghang Liu <yanghliu@redhat.com> Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Acked-by: Martin Habets <habetsm.xilinx@gmail.com> Link: https://lore.kernel.org/r/20220712062642.6915-1-ihuguet@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21net: ftgmac100: Hold reference returned by of_get_child_by_name()Liang He1-1/+14
[ Upstream commit 49b9f431ff0d845a36be0b3ede35ec324f2e5fee ] In ftgmac100_probe(), we should hold the refernece returned by of_get_child_by_name() and use it to call of_node_put() for reference balance. Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Signed-off-by: Liang He <windhl@126.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ipv4: Fix data-races around sysctl_ip_dynaddr.Kuniyuki Iwashima2-3/+3
[ Upstream commit e49e4aff7ec19b2d0d0957ee30e93dade57dab9e ] While reading sysctl_ip_dynaddr, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21raw: Fix a data-race around sysctl_raw_l3mdev_accept.Kuniyuki Iwashima1-1/+1
[ Upstream commit 1dace014928e6e385363032d359a04dee9158af0 ] While reading sysctl_raw_l3mdev_accept, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 6897445fb194 ("net: provide a sysctl raw_l3mdev_accept for raw socket lookup with VRFs") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21icmp: Fix a data-race around sysctl_icmp_ratemask.Kuniyuki Iwashima1-1/+1
[ Upstream commit 1ebcb25ad6fc3d50fca87350acf451b9a66dd31e ] While reading sysctl_icmp_ratemask, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21icmp: Fix a data-race around sysctl_icmp_ratelimit.Kuniyuki Iwashima1-1/+2
[ Upstream commit 2a4eb714841f288cf51c7d942d98af6a8c6e4b01 ] While reading sysctl_icmp_ratelimit, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21drm/i915/gt: Serialize TLB invalidates with GT resetsChris Wilson1-1/+14
[ Upstream commit a1c5a7bf79c1faa5633b918b5c0666545e84c4d1 ] Avoid trying to invalidate the TLB in the middle of performing an engine reset, as this may result in the reset timing out. Currently, the TLB invalidate is only serialised by its own mutex, forgoing the uncore lock, but we can take the uncore->lock as well to serialise the mmio access, thereby serialising with the GDRST. Tested on a NUC5i7RYB, BIOS RYBDWi35.86A.0380.2019.0517.1530 with i915 selftest/hangcheck. Cc: stable@vger.kernel.org # v4.4 and upper Fixes: 7938d61591d3 ("drm/i915: Flush TLBs before releasing backing store") Reported-by: Mauro Carvalho Chehab <mchehab@kernel.org> Tested-by: Mauro Carvalho Chehab <mchehab@kernel.org> Reviewed-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Chris Wilson <chris.p.wilson@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com> Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1e59a7c45dd919a530256b9ac721ac6ea86c0677.1657639152.git.mchehab@kernel.org (cherry picked from commit 33da97894758737895e90c909f16786052680ef4) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ARM: dts: sunxi: Fix SPI NOR campatible on Orange Pi ZeroMichal Suchanek1-1/+1
[ Upstream commit 884b66976a7279ee889ba885fe364244d50b79e7 ] The device tree should include generic "jedec,spi-nor" compatible, and a manufacturer-specific one. The macronix part is what is shipped on the boards that come with a flash chip. Fixes: 45857ae95478 ("ARM: dts: orange-pi-zero: add node for SPI NOR") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20220708174529.3360-1-msuchanek@suse.de Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ARM: dts: at91: sama5d2: Fix typo in i2s1 nodeRyan Wanner1-1/+1
[ Upstream commit 2fdf15b50a46e366740df4cccbe2343269b4ff55 ] Fix typo in i2s1 causing errors in dt binding validation. Change assigned-parrents to assigned-clock-parents to match i2s0 node formatting. Fixes: 1ca81883c557 ("ARM: dts: at91: sama5d2: add nodes for I2S controllers") Signed-off-by: Ryan Wanner <Ryan.Wanner@microchip.com> [claudiu.beznea: use imperative addressing in commit description, remove blank line after fixes tag, fix typo in commit message] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220707215812.193008-1-Ryan.Wanner@microchip.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ipv4: Fix a data-race around sysctl_fib_sync_mem.Kuniyuki Iwashima1-1/+1
[ Upstream commit 73318c4b7dbd0e781aaababff17376b2894745c0 ] While reading sysctl_fib_sync_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid a data-race. Fixes: 9ab948a91b2c ("ipv4: Allow amount of dirty memory from fib resizing to be controllable") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21icmp: Fix data-races around sysctl.Kuniyuki Iwashima1-2/+3
[ Upstream commit 48d7ee321ea5182c6a70782aa186422a70e67e22 ] While reading icmp sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 4cdf507d5452 ("icmp: add a global rate limitation") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21cipso: Fix data-races around sysctl.Kuniyuki Iwashima2-6/+8
[ Upstream commit dd44f04b9214adb68ef5684ae87a81ba03632250 ] While reading cipso sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 446fda4f2682 ("[NetLabel]: CIPSOv4 engine") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21net: Fix data-races around sysctl_mem.Kuniyuki Iwashima1-1/+1
[ Upstream commit 310731e2f1611d1d13aae237abcf8e66d33345d5 ] While reading .sysctl_mem, it can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21inetpeer: Fix data-races around sysctl.Kuniyuki Iwashima1-4/+8
[ Upstream commit 3d32edf1f3c38d3301f6434e56316f293466d7fb ] While reading inetpeer sysctl variables, they can be changed concurrently. So, we need to add READ_ONCE() to avoid data-races. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21net: stmmac: dwc-qos: Disable split header for Tegra194Jon Hunter1-0/+1
[ Upstream commit 029c1c2059e9c4b38f97a06204cdecd10cfbeb8a ] There is a long-standing issue with the Synopsys DWC Ethernet driver for Tegra194 where random system crashes have been observed [0]. The problem occurs when the split header feature is enabled in the stmmac driver. In the bad case, a larger than expected buffer length is received and causes the calculation of the total buffer length to overflow. This results in a very large buffer length that causes the kernel to crash. Why this larger buffer length is received is not clear, however, the feedback from the NVIDIA design team is that the split header feature is not supported for Tegra194. Therefore, disable split header support for Tegra194 to prevent these random crashes from occurring. [0] https://lore.kernel.org/linux-tegra/b0b17697-f23e-8fa5-3757-604a86f3a095@nvidia.com/ Fixes: 67afd6d1cfdf ("net: stmmac: Add Split Header support and enable it in XGMAC cores") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20220706083913.13750-1-jonathanh@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ASoC: sgtl5000: Fix noise on shutdown/removeFrancesco Dolcini2-0/+10
[ Upstream commit 040e3360af3736348112d29425bf5d0be5b93115 ] Put the SGTL5000 in a silent/safe state on shutdown/remove, this is required since the SGTL5000 produces a constant noise on its output after it is configured and its clock is removed. Without this change this is happening every time the module is unbound/removed or from reboot till the clock is enabled again. The issue was experienced on both a Toradex Colibri/Apalis iMX6, but can be easily reproduced everywhere just playing something on the codec and after that removing/unbinding the driver. Fixes: 9b34e6cc3bc2 ("ASoC: Add Freescale SGTL5000 codec support") Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Fabio Estevam <festevam@denx.de> Link: https://lore.kernel.org/r/20220624101301.441314-1-francesco.dolcini@toradex.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-07-21ima: Fix a potential integer overflow in ima_appraise_measurementHuaxin Lu1-1/+2
[ Upstream commit d2ee2cfc4aa85ff6a2a3b198a3a524ec54e3d999 ] When the ima-modsig is enabled, the rc passed to evm_verifyxattr() may be negative, which may cause the integer overflow problem. Fixes: 39b07096364a ("ima: Implement support for module-style appended signatures") Signed-off-by: Huaxin Lu <luhuaxin1@huawei.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-02 16:57:49 +0300