summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2005-11-11[PATCH] PCI: automatically set device_driver.ownerLaurent riffard4-12/+22
A nice feature of sysfs is that it can create the symlink from the driver to the module that is contained in it. It requires that the device_driver.owner is set, what is not the case for many PCI drivers. This patch allows pci_register_driver to set automatically the device_driver.owner for any PCI driver. Credits to Al Viro who suggested the method. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> -- drivers/ide/setup-pci.c | 12 +++++++----- drivers/pci/pci-driver.c | 9 +++++---- include/linux/ide.h | 3 ++- include/linux/pci.h | 10 ++++++++-- 4 files changed, 22 insertions(+), 12 deletions(-)
2005-11-11[PATCH] pci-driver: store_new_id() not inlineRandy Dunlap1-1/+1
store_new_id() should not be (and cannot be) inline; the function pointer is stored in a device_attribute table. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] PCI: NCR 53c810 quirkIvan Kokshaysky2-14/+15
Move the PPC fixup for old NCR 810 controllers to generic quirks - it's needed for Alpha, x86 and other architectures that use setup-bus.c. Thanks to Jay Estabrook for pointing out the issue. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] PCI: Fix VIA 686 PCI quirk namesMeelis Roos1-2/+2
The quirk names for VIA 686 are mistyped in 2.6.14 (686 vs 868). S3 868 influence? :) Here is a patch to correct them. Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: fix handling of power faults during hotplugrajesh.shah@intel.com1-5/+2
The current pciehp implementation reports a power-fail error even if the condition has cleared by the time the corresponding interrupt handling code gets a chance to run. This patch fixes this problem. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: clean-up how we request control of hotplug hardwarerajesh.shah@intel.com5-19/+89
This patch further tweaks how we request control of hotplug controller hardware from BIOS. We first search the ACPI namespace corresponding to a specific hotplug controller looking for an _OSC or OSHP method. On failure, we successively move to the ACPI parent object, till we hit the highest level host bridge in the hierarchy. This allows for different types of BIOS's which place the _OSC/OSHP methods at various places in the acpi namespace, while still not encroaching on the namespace of some other root level host bridge. This patch also introduces a new load time option (pciehp_force) that allows us to bypass all _OSC/OSHP checking. Not supporting these methods seems to be be the most common ACPI firmware problem we've run into. This will still _not_ allow the pciehp driver to work correctly if the BIOS really doesn't support pciehp (i.e. if it doesn't generate a hotplug interrupt). Use this option with caution. Some BIOS's may deliberately not build any _OSC/OSHP methods to make sure it retains control the hotplug hardware. Using the pciehp_force parameter for such systems can lead to two separate entities trying to control the same hardware. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: request control of each hotplug controller individuallyrajesh.shah@intel.com3-15/+10
This patch tweaks the way pciehp requests control of the hotplug hardware from BIOS. It now tries to invoke the ACPI _OSC method for a specific hotplug controller only, rather than walking the entire acpi namespace invoking all possible _OSC methods under all host bridges. This allows us to gain control of each hotplug controller individually, even if BIOS fails to give us control of some other hotplug controller in the system. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: reduce debug message verbosityrajesh.shah@intel.com4-69/+28
Reduce the number of debug messages generated if pciehp debug is enabled. I tried to restrict this to removing debug messages that are either early-driver-debug type messages, or print information that can be inferred through other debug prints. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: miscellaneous cleanupsrajesh.shah@intel.com7-133/+41
Remove un-necessary header includes, remove dead code, remove some hardcoded constants... Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: remove redundant data structuresrajesh.shah@intel.com4-734/+65
State information is currently stored in per-slot as well as per-pci-function data structures in pciehp. There's a lot of overlap in the information kept, and some of it is never used. This patch consolidates the state information to per-slot and eliminates unused data structures. The biggest change is to eliminate the pci_func structure and the code around managing its lists. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] pciehp: reduce dependence on ACPIrajesh.shah@intel.com8-993/+96
Reduce the PCI Express hotplug driver's dependence on ACPI. We don't walk the acpi namespace anymore to build a list of bridges and devices. We go to ACPI only to run the _OSC or _OSHP methods to transition control of hotplug hardware from system BIOS to the hotplug driver, and to run the _HPP method to get hotplug device parameters like cache line size, latency timer and SERR/PERR enable from BIOS. Note that one of the side effects of this patch is that pciehp does not automatically enable the hot-added device or its DMA bus mastering capability now. It expects the device driver to do that. This may break some drivers and we will have to fix them as they are reported. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] patch 1/8] pciehp: use the PCI core for hotplug resource managementrajesh.shah@intel.com6-3237/+85
This patch converts the pci express hotplug controller driver to use the PCI core for resource management. This eliminates a lot of duplicated code and integrates pciehp with the system's normal PCI handling code. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11[PATCH] PCI: add pci_find_next_capability()Roland Dreier2-14/+34
Some devices have more than one capability of the same type. For example, the PCI header for the PathScale InfiniPath looks like: 04:01.0 InfiniBand: Unknown device 1fc1:000d (rev 02) Subsystem: Unknown device 1fc1:000d Flags: bus master, fast devsel, latency 0, IRQ 193 Memory at fea00000 (64-bit, non-prefetchable) [size=2M] Capabilities: [c0] HyperTransport: Slave or Primary Interface Capabilities: [f8] HyperTransport: Interrupt Discovery and Configuration There are _two_ HyperTransport capabilities, and the PathScale driver wants to look at both of them. The current pci_find_capability() API doesn't work for this, since it only allows us to get to the first capability of a given type. The patch below introduces a new pci_find_next_capability(), which can be used in a loop like for (pos = pci_find_capability(pdev, <ID>); pos; pos = pci_find_next_capability(pdev, pos, <ID>)) { /* ... */ } Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-11Merge branch 'release' of ↵Linus Torvalds19-190/+475
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6
2005-11-11Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds24-149/+240
2005-11-11Merge master.kernel.org:/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds1-2/+2
2005-11-11Merge branch 'for-linus' of ↵Linus Torvalds20-162/+465
master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
2005-11-11[PATCH] Don't print per-cpu vm stats for offline cpus.Dave Jones1-1/+1
I just hit a page allocation error on a kernel configured to support 64 CPUs. It spewed 60 completely useless unnecessary lines of info. Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-11[DCCP]: Alter website for DCCP in MAINTAINERSIan McDonald1-1/+1
Website for DCCP is now hosted at OSDL Signed-off-by: Ian McDonald <imcdnzl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-11[DCCP]: Create Documentation/networking/dccp.txtIan McDonald1-0/+56
This patch is a first go at some documentation. Please advise if gmail has mangled patch and I will revert to an attachment: Signed-off-by: Ian McDonald <imcdnzl@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-11[NET]: Annotate h_proto in struct ethhdrPavel Roskin1-1/+3
The protocol field in ethernet headers is big-endian and should be annotated as such. This patch allows detection of missing ntohs() calls on the ethernet protocol field when sparse is run with __CHECK_ENDIAN__ defined. This is a revised version that includes <linux/types.h> so that the userspace programs are not confused by __be16. Thanks to David S. Miller. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-11[NET]: Detect hardware rx checksum faults correctlyHerbert Xu19-134/+173
Here is the patch that introduces the generic skb_checksum_complete which also checks for hardware RX checksum faults. If that happens, it'll call netdev_rx_csum_fault which currently prints out a stack trace with the device name. In future it can turn off RX checksum. I've converted every spot under net/ that does RX checksum checks to use skb_checksum_complete or __skb_checksum_complete with the exceptions of: * Those places where checksums are done bit by bit. These will call netdev_rx_csum_fault directly. * The following have not been completely checked/converted: ipmr ip_vs netfilter dccp This patch is based on patches and suggestions from Stephen Hemminger and David S. Miller. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[BNX2]: simplify parameter checks in bnx2_{get,set}_eepromJohn W. Linville1-10/+2
Remove the superfluous parameter checking in bnx2_{get,set}_eeprom. The parameters are already validated in ethtool_{get,set}_eeprom. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[BNX2]: check return of dev_alloc_skb in bnx2_test_loopbackJohn W. Linville1-0/+2
Check return of dev_alloc_skb in bnx2_test_loopback, and handle appropriately. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[BNX2]: output driver name as prefix in error messageJohn W. Linville1-1/+1
Output driver name as prefix to "Unknown flash/EEPROM type." message. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[ATM]: [horizon] fix sparse warningsDave Jones1-2/+2
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Chas Williams <cmas@cmf.nrl.navy.mil> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[PATCH] kbuild: build breaks after -imacros was introducedZachary Amsden1-1/+1
I have to revert the recent addition of -imacros to the Makefile to get my tool chain to build. Without the change, below, I get: Note that this looks entirely like a toolchain bug. Here is the offending command: [pid 12163] execve("/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0", ["/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0", "-lang-asm", "-nostdinc", "-Iinclude", "-Iinclude/asm-i386/mach-default", "-D__GNUC__=3", "-D__GNUC_MINOR__=2", "-D__GNUC_PATCHLEVEL__=2", "-D__GXX_ABI_VERSION=102", "-D__ELF__", "-Dunix", "-D__gnu_linux__", "-Dlinux", "-D__ELF__", "-D__unix__", "-D__gnu_linux__", "-D__linux__", "-D__unix", "-D__linux", "-Asystem=posix", "-D__NO_INLINE__", "-D__STDC_HOSTED__=1", "-Acpu=i386", "-Amachine=i386", "-Di386", "-D__i386", "-D__i386__", "-D__tune_i386__", "-D__KERNEL__", "-D__ASSEMBLY__", "-isystem", "/usr/lib/gcc-lib/i386-redhat-linux/3.2.2/include", "-imacros", "include/linux/autoconf.h", "-MD", "arch/i386/kernel/.entry.o.d", "arch/i386/kernel/entry.S", "-o", "/tmp/ccOlsFJR.s"] Which should execute properly, I think. But it does not: zach-dev:linux-2.6.14-zach-work $ make CHK include/linux/version.h CHK include/linux/compile.h CHK usr/initramfs_list AS arch/i386/kernel/entry.o /usr/lib/gcc-lib/i386-redhat-linux/3.2.2/tradcpp0: output filename specified twice make[1]: *** [arch/i386/kernel/entry.o] Error 1 make: *** [arch/i386/kernel] Error 2 gcc (GCC) 3.2.2 20030222 (Red Hat Linux 3.2.2-5) Deprecating the -imacros fixes the build for me. It does not appear to be a simple argument overflow problem in trapcpp0, since deprecating all the defines reproduces the problem as well. Also, switching -imacros to -include fixes the problem. Signed-off-by: Zachary Amsden <zach@vmware.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2005-11-10[SPARC64]: Re-export uts_sem for solaris compat module.David S. Miller1-0/+2
Revert: b26b9bc58263acda274f82a9dde8b6d96559878a Signed-off-by: David S. Miller <davem@davemloft.net>
2005-11-10[IA64] utilize notify_die() for XPC disengageDean Nelson3-5/+107
XPC (as in arch/ia64/sn/kernel/xp*) has a need to notify other partitions (SGI Altix) whenever a partition is going down in order to get them to disengage from accessing the halting partition's memory. If this is not done before the reset of the hardware, the other partitions can find themselves encountering MCAs that bring them down. Signed-off-by: Dean Nelson <dcn@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-10[IA64] Replace kcalloc(1, with kzalloc.Panagiotis Issaris3-5/+5
Conversion from kcalloc(1, to kzalloc. Signed-off-by: Panagiotis Issaris <takis@issaris.org> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-11-10Pull add-mmio-to-proc-iomem into release branchTony Luck1-24/+82
2005-11-10Pull context-bitmap into release branchTony Luck4-76/+92
2005-11-10Pull extend-notify-die into release branchTony Luck5-60/+162
2005-11-10Pull memoryless-node-allocation into release branchTony Luck1-10/+9
2005-11-10Pull mca-check-psp into release branchTony Luck1-4/+13
2005-11-10Pull align-sig-frame into release branchTony Luck1-6/+5
2005-11-10[IB] umad: further ib_unregister_mad_agent() deadlock fixesRoland Dreier1-24/+63
The previous umad deadlock fix left ib_umad_kill_port() still vulnerable to deadlocking. This patch fixes that by downgrading our lock to a read lock when we might end up trying to reacquire the lock for reading. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] mthca: fix posting long lists of receive work requestsMichael S. Tsirkin3-5/+39
In Tavor mode, when posting a long list of receive work requests, a doorbell must be rung every 256 requests. Add code to do this when required. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] mthca: fix wraparound handling in mthca_cq_clean()Roland Dreier1-10/+6
Handle case where prod_index has wrapped around and become less than cq->cons_index by checking that their difference as a signed int is positive rather than comparing directly. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] mthca: fix posting of atomic operationsMichael S. Tsirkin1-4/+4
The size of work requests for atomic operations was computed incorrectly in mthca: all sizeofs need to be divided by 16. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] uverbs: have kernel return QP capabilitiesJack Morgenstein8-16/+98
Move the computation of QP capabilities (max scatter/gather entries, max inline data, etc) into the kernel, and have the uverbs module return the values as part of the create QP response. This keeps precise knowledge of device limits in the low-level kernel driver. This requires an ABI bump, so while we're making changes, get rid of the max_sge parameter for the modify SRQ command -- it's not used and shouldn't be there. Signed-off-by: Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] umad: get rid of unused mr arrayRoland Dreier1-25/+4
Now that ib_umad uses the new MAD sending interface, it no longer needs its own L_Key. So just delete the array of MRs that it keeps. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] Have cq_resize() method take an int, not int*Roland Dreier2-11/+3
Change the struct ib_device.resize_cq() method to take a plain integer that holds the new CQ size, rather than a pointer to an integer that it uses to return the new size. This makes the interface match the exported ib_resize_cq() signature, and allows the low-level driver to update the CQ size with proper locking if necessary. No in-tree drivers are exporting this method yet. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] mthca: fix typo in catastrophic error pollingRoland Dreier1-1/+1
Fix a typo in the rearming of the catastrophic error polling timer: we should rearm the timer as long as the stop flag is _not_ set. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IPoIB] no need to set skb->dev right before freeing skbRoland Dreier1-13/+4
For cut-and-paste reasons, the IPoIB driver was setting skb->dev right before calling dev_kfree_skb_any(). Get rid of this. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IB] umad: avoid potential deadlock when unregistering MAD agentsRoland Dreier1-12/+17
ib_unregister_mad_agent() completes all pending MAD sends and waits for the agent's send_handler routine to return. umad's send_handler() calls queue_packet(), which does down_read() on the port mutex to look up the agent ID. This means that the port mutex cannot be held for writing while calling ib_unregister_mad_agent(), or else it will deadlock. This patch fixes all the calls to ib_unregister_mad_agent() in the umad module to avoid this deadlock. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10[IPoIB] add path record information in debugfsRoland Dreier5-49/+231
Add ibX_path files to debugfs that contain information about the IPoIB path cache. IPoIB ARP only gives GIDs, which the IPoIB driver must resolve to real IB paths through the ib_sa module. For debugging, when the ARP table looks OK but traffic isn't flowing, it's useful to be able to see if the resolution from GID to path worked. Also clean up the formatting of the existing _mcg debugfs files. Signed-off-by: Roland Dreier <rolandd@cisco.com>
2005-11-10Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds98-2540/+11839
2005-11-10[PATCH] Don't auto-reap traced childrenOleg Nesterov1-1/+1
If a task is being traced we never auto-reap it even if it might look like its parent doesn't care. The tracer obviously _does_ care. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-fixes-2.6Linus Torvalds8-26/+12