summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-18X25: Move interrupt flag to bitfieldandrew hendry4-4/+7
Moves the x25 interrupt flag from char into bitfield. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18X25: Move qbit flag to bitfieldandrew hendry2-8/+15
Moves the X25 q bit flag from char into a bitfield to allow BKL cleanup. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18bnx2x: avoid TX timeout when stopping deviceStanislaw Gruszka1-4/+2
When stop device call netif_carrier_off() just after disabling TX queue to avoid possibility of netdev watchdog warning and ->ndo_tx_timeout() invocation. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18bnx2: Use netif_carrier_off() to prevent timeout.Michael Chan1-9/+5
Based on original patch from Stanislaw Gruszka <sgruszka@redhat.com>. Using netif_carrier_off() is better than updating all the ->trans_start on all the tx queues. netif_carrier_off() needs to be called after bnx2_disable_int_sync() to guarantee no race conditions with the serdes timers that can modify the carrier state. If the chip or phy is reset, carrier will turn back on when we get the link interrupt. If there is no reset, we need to turn carrier back on in bnx2_netif_start(). Again, the phy_lock prevents race conditions with the serdes timers. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18bnx2: Update 5709 MIPS firmware and version to 2.0.15.Michael Chan4-6062/+6085
New firmware fixes a performance regression on small packets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18bnx2: Fix register printouts during NETEV_WATCHDOG.Eddie Wai2-3/+14
Dump the correct MCP registers and add EMAC_RX_STATUS register during NETDEV_WATCHDOG for debugging. Signed-off-by: Eddie Wai <waie@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: mark device state failAmit Kumar Salecha1-2/+8
Device state need to be mark as FAILED, if fail to start firmware. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: remove unused registerAmit Kumar Salecha4-21/+0
Removing register defines which are not used by Qlgoic CNA device. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: fix internal loopback testSucheta Chakraborty1-0/+2
Reset/set DEV_UP bit during allocation and deallocation of resources. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: module param for firmware load optionAmit Kumar Salecha1-1/+8
By default fw is loaded from flash, user can change this priority using load_fw_file module param. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: fix rx bytes statisticsSucheta Chakraborty1-1/+1
Added lrobytes to it. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: change adapter name displaySucheta Chakraborty1-1/+6
Append mac address to adapter name. Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18qlcnic: fix memory leaksAnirban Chakraborty2-3/+4
Fixes memory leak in error path when memory allocation for adapter data structures fails. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: check for mii_bus platform dataSonic Zhang1-0/+6
If the platform data for the mii_bus is missing, gracefully error out rather than deference NULL pointers. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: handle timeouts with the MDIO registers gracefullyMike Frysinger1-19/+34
Have the low level MDIO functions pass back up timeout information so we don't waste time polling them multiple times when there is a problem, and so we don't let higher layers think the device is available when it isn't. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: use promiscuous flag for promiscuous modeSonic Zhang1-1/+1
Rather than using the Receive All Frames (RAF) bit to enable promiscuous mode, use the Promiscuous (PR) bit. This lowers overhead at runtime as we let the hardware process the packets that should actually be checked. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: add support for wake-on-lan magic packetsMichael Hennerich2-4/+75
Note that WOL works only in PM Suspend Standby Mode (Sleep Mode). Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: clear RXCKS if hardware generated checksum is not enabledSonic Zhang1-2/+3
Otherwise we might be get a setting mismatch from a previous module or bootloader and what the driver currently expects. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: deduce Ethernet FCS from hardware IP payload checksumSonic Zhang1-2/+33
IP checksum is based on 16-bit one's complement algorithm, so to deduce a value from checksum is equal to add its complement. Unfortunately, the Blackfin on-chip MAC checksum logic only works when the IP packet has a header length of 20 bytes. This is true for most IPv4 packets, but not for IPv6 packets or IPv4 packets which use header options. So only use the hardware checksum when appropriate. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jon Kowal <jon.kowal@dspecialists.de> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: invalid data cache only once for each new rx skb bufferSonic Zhang1-5/+8
The skb buffer isn't actually used until we finish transferring and pass it up to higher layers, so only invalidate the range once before we start receiving actual data. This also avoids the problem with data invalidating on Blackfin systems -- there is no invalidate-only, just invalidate+flush. So when running in writeback mode, there is the small (but not uncommon) possibility of the flush overwriting valid DMA-ed data from the cache. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: handler RX status errorsPeter Meerwald1-3/+14
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Graf Yang <graf.yang@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18netdev: bfin_mac: add support for IEEE 1588 PTPBarry Song3-1/+362
Newer on-chip MAC peripherals support IEEE 1588 PTP in the hardware, so extend the driver to support this functionality. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18net: No dst refcounting in ip_queue_xmit()Eric Dumazet1-2/+7
TCP outgoing packets can avoid two atomic ops, and dirtying of previously higly contended cache line using new refdst infrastructure. Note 1: loopback device excluded because of !IFF_XMIT_DST_RELEASE Note 2: UDP packets dsts are built before ip_queue_xmit(). Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18net: Use ip_route_input_noref() in input pathEric Dumazet3-5/+5
Use ip_route_input_noref() in ip fast path, to avoid two atomic ops per incoming packet. Note: loopback is excluded from this optimization in ip_rcv_finish() Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18net: implements ip_route_input_noref()Eric Dumazet2-6/+26
ip_route_input() is the version returning a refcounted dst, while ip_route_input_noref() returns a non refcounted one. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18net: add a noref bit on skb dstEric Dumazet12-25/+134
Use low order bit of skb->_skb_dst to tell dst is not refcounted. Change _skb_dst to _skb_refdst to make sure all uses are catched. skb_dst() returns the dst, regardless of noref bit set or not, but with a lockdep check to make sure a noref dst is not given if current user is not rcu protected. New skb_dst_set_noref() helper to set an notrefcounted dst on a skb. (with lockdep check) skb_dst_drop() drops a reference only if skb dst was refcounted. skb_dst_force() helper is used to force a refcount on dst, when skb is queued and not anymore RCU protected. Use skb_dst_force() in __sk_add_backlog(), __dev_xmit_skb() if !IFF_XMIT_DST_RELEASE or skb enqueued on qdisc queue, in sock_queue_rcv_skb(), in __nf_queue(). Use skb_dst_force() in dev_requeue_skb(). Note: dst_use_noref() still dirties dst, we might transform it later to do one dirtying per jiffies. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18rps: avoid one atomic in enqueue_to_backlogEric Dumazet1-2/+4
If CONFIG_SMP=y, then we own a queue spinlock, we can avoid the atomic test_and_set_bit() from napi_schedule_prep(). We now have same number of atomic ops per netif_rx() calls than with pre-RPS kernel. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18drivers/net/usb/asix.c: Fix unaligned accessesNeil Jones1-1/+33
Using this driver can cause unaligned accesses in the IP layer This has been fixed by aligning the skb data correctly using the spare room left over by the 4 byte header inserted between packets by the device. Signed-off-by: Neil Jones <NeilJay@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ibmveth: Add suspend/resume supportBrian King1-0/+12
Adds support for resuming from suspend for IBM virtual ethernet devices. We may have lost an interrupt over the suspend, so we just kick the interrupt handler to process anything that is outstanding. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-18ipv6 addrlabel: permit deletion of labels assigned to removed devFlorian Westphal1-4/+4
as addrlabels with an interface index are left alone when the interface gets removed this results in addrlabels that can no longer be removed. Restrict validation of index to adding new addrlabels. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-17Merge branch 'master' of ↵David S. Miller6-82/+166
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: include/linux/if_link.h
2010-05-16rtnetlink: make SR-IOV VF interface symmetricChris Wright2-53/+129
Now we have a set of nested attributes: IFLA_VFINFO_LIST (NESTED) IFLA_VF_INFO (NESTED) IFLA_VF_MAC IFLA_VF_VLAN IFLA_VF_TX_RATE This allows a single set to operate on multiple attributes if desired. Among other things, it means a dump can be replayed to set state. The current interface has yet to be released, so this seems like something to consider for 2.6.34. Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16qeth: synchronize configuration interfaceFrank Blaschka6-168/+242
Synchronize access to the drivers configuration interface. Also do not allow configuration changes during online/offline transition. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16qeth: new message if OLM limit is reachedUrsula Braun1-1/+9
z/OS may activate Optimized Latency Mode (OLM) for a connection through an OSA Express3 adapter, which reduces the number of allowed concurrent connections, if adapter is used in shared mode. Create a meaningful message, if activation of an OSA-connection fails due to an active OLM-connection on the shared OSA-adapter. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16qeth: exploit HW TX checksummingFrank Blaschka2-26/+69
OSA supports HW TX checksumming in layer 3 mode. Enable this feature and remove software fallback used for TSO. Cleanup checksum bits to indicate OSA can do checksumming only for IPv4 TCP and UDP. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16sctp: delete active ICMP proto unreachable timer when free transportWei Yongjun1-0/+4
transport may be free before ICMP proto unreachable timer expire, so we should delete active ICMP proto unreachable timer when transport is going away. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16net: congestion notifications are not dropped packetsEric Dumazet2-3/+3
vlan/macvlan start_xmit() can inform caller of congestion with NET_XMIT_CN return value. This doesnt mean packet was dropped. Increment normal stat counters instead of tx_dropped. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16net: Introduce sk_route_nocapsEric Dumazet5-6/+15
TCP-MD5 sessions have intermittent failures, when route cache is invalidated. ip_queue_xmit() has to find a new route, calls sk_setup_caps(sk, &rt->u.dst), destroying the sk->sk_route_caps &= ~NETIF_F_GSO_MASK that MD5 desperately try to make all over its way (from tcp_transmit_skb() for example) So we send few bad packets, and everything is fine when tcp_transmit_skb() is called again for this socket. Since ip_queue_xmit() is at a lower level than TCP-MD5, I chose to use a socket field, sk_route_nocaps, containing bits to mask on sk_route_caps. Reported-by: Bhaskar Dutta <bhaskie@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16tcp: fix MD5 (RFC2385) supportEric Dumazet2-28/+27
TCP MD5 support uses percpu data for temporary storage. It currently disables preemption so that same storage cannot be reclaimed by another thread on same cpu. We also have to make sure a softirq handler wont try to use also same context. Various bug reports demonstrated corruptions. Fix is to disable preemption and BH. Reported-by: Bhaskar Dutta <bhaskie@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16net: Consistent skb timestampingEric Dumazet4-19/+49
With RPS inclusion, skb timestamping is not consistent in RX path. If netif_receive_skb() is used, its deferred after RPS dispatch. If netif_rx() is used, its done before RPS dispatch. This can give strange tcpdump timestamps results. I think timestamping should be done as soon as possible in the receive path, to get meaningful values (ie timestamps taken at the time packet was delivered by NIC driver to our stack), even if NAPI already can defer timestamping a bit (RPS can help to reduce the gap) Tom Herbert prefer to sample timestamps after RPS dispatch. In case sampling is expensive (HPET/acpi_pm on x86), this makes sense. Let admins switch from one mode to another, using a new sysctl, /proc/sys/net/core/netdev_tstamp_prequeue Its default value (1), means timestamps are taken as soon as possible, before backlog queueing, giving accurate timestamps. Setting a 0 value permits to sample timestamps when processing backlog, after RPS dispatch, to lower the load of the pre-RPS cpu. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16xfrm: fix policy unreferencing on larval dropTimo Teras1-1/+1
I mistakenly had the error path to use num_pols to decide how many policies we need to drop (cruft from earlier patch set version which did not handle socket policies right). This is wrong since normally we do not keep explicit references (instead we hold reference to the cache entry which holds references to policies). drop_pols is set to num_pols if we are holding the references, so use that. Otherwise we eventually BUG_ON inside xfrm_policy_destroy due to premature policy deletion. Signed-off-by: Timo Teras <timo.teras@iki.fi> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16net: adjust handle_macvlan to pass port struct to hookJiri Pirko3-10/+11
Now there's null check here and also again in the hook. Looking at bridge bits which are simmilar, port structure is rcu_dereferenced right away in handle_bridge and passed to hook. Looks nicer. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16skge: use the DMA state API instead of the pci equivalentsFUJITA Tomonori2-18/+18
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16net: reserve ports for applications using fixed port numbersAmerigo Wang8-2/+73
(Dropped the infiniband part, because Tetsuo modified the related code, I will send a separate patch for it once this is accepted.) This patch introduces /proc/sys/net/ipv4/ip_local_reserved_ports which allows users to reserve ports for third-party applications. The reserved ports will not be used by automatic port assignments (e.g. when calling connect() or bind() with port number 0). Explicit port allocation behavior is unchanged. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16sysctl: add proc_do_large_bitmapOctavian Purdila2-0/+163
The new function can be used to read/write large bitmaps via /proc. A comma separated range format is used for compact output and input (e.g. 1,3-4,10-10). Writing into the file will first reset the bitmap then update it based on the given input. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16sysctl: refactor integer handling proc codeAmerigo Wang1-161/+229
(Based on Octavian's work, and I modified a lot.) As we are about to add another integer handling proc function a little bit of cleanup is in order: add a few helper functions to improve code readability and decrease code duplication. In the process a bug is also fixed: if the user specifies a number with more then 20 digits it will be interpreted as two integers (e.g. 10000...13 will be interpreted as 100.... and 13). Behavior for EFAULT handling was changed as well. Previous to this patch, when an EFAULT error occurred in the middle of a write operation, although some of the elements were set, that was not acknowledged to the user (by shorting the write and returning the number of bytes accepted). EFAULT is now treated just like any other errors by acknowledging the amount of bytes accepted. Signed-off-by: Octavian Purdila <opurdila@ixiacom.com> Signed-off-by: WANG Cong <amwang@redhat.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16Merge branch 'master' of ↵David S. Miller11-117/+480
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2010-05-16bridge: update sysfs link names if port device names have changedSimon Arlott5-6/+42
Links for each port are created in sysfs using the device name, but this could be changed after being added to the bridge. As well as being unable to remove interfaces after this occurs (because userspace tools don't recognise the new name, and the kernel won't recognise the old name), adding another interface with the old name to the bridge will cause an error trying to create the sysfs link. This fixes the problem by listening for NETDEV_CHANGENAME notifications and renaming the link. https://bugzilla.kernel.org/show_bug.cgi?id=12743 Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16bridge: change console message interfacestephen hemminger10-62/+62
Use one set of macro's for all bridge messages. Note: can't use netdev_XXX macro's because bridge is purely virtual and has no device parent. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-05-16bridge: netpoll cleanupstephen hemminger3-28/+39
Move code around so that the ifdef for NETPOLL_CONTROLLER don't have to show up in main code path. The control functions should be in helpers that are only compiled if needed. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 21:27:41 +0300