summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-15Linux 5.19.9v5.19.9Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220913140410.043243217@linuxfoundation.org Tested-by: Ronald Warsow <rwarsow@gmx.de> Tested-by: Fenil Jain <fkjainco@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15drm/amd/display: Removing assert statements for LinuxSaaem Rizvi5-9/+30
commit 149f6d1a6035a7aa6595ac6eeb9c8f566b2103cd upstream. [WHY] Assert statements causing several bugs on Linux DM [HOW] Removing assert statement for Linux DM (ASSERT(result == VBIOSSMC_Result_OK)). Also adding logging statements for setting dcfclk. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216092 Fixes: c1b972a18d05 ("drm/amd/display: Insert pulling smu busy status before sending another request") Reviewed-by: Gabe Teeger <Gabe.Teeger@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15drm/amd/display: Add SMU logging codeSaaem Rizvi5-0/+48
commit 4b33b5ffcf68de3a43e7dddc91c5dc86e6ed8587 upstream. [WHY] Logging for SMU response value after the wait allows us to know immediately what the response value was. Makes it easier to debug should the value be anything other than OK. [HOW] Using the the already available DC SMU logging functions. Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by: Charlene Liu <Charlene.Liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15iommu: Fix false ownership failure on AMD systems with PASID activatedJason Gunthorpe2-2/+21
commit 2380f1e8195ef612deea1dc7a3d611c5d2b9b56a upstream. The AMD IOMMU driver cannot activate PASID mode on a RID without the RID's translation being set to IDENTITY. Further it requires changing the RID's page table layout from the normal v1 IOMMU_DOMAIN_IDENTITY layout to a different v2 layout. It does this by creating a new iommu_domain, configuring that domain for v2 identity operation and then attaching it to the group, from within the driver. This logic assumes the group is already set to the IDENTITY domain and is being used by the DMA API. However, since the ownership logic is based on the group's domain pointer equaling the default domain to detect DMA API ownership, this causes it to look like the group is not attached to the DMA API any more. This blocks attaching drivers to any other devices in the group. In a real system this manifests itself as the HD-audio devices on some AMD platforms losing their device drivers. Work around this unique behavior of the AMD driver by checking for equality of IDENTITY domains based on their type, not their pointer value. This allows the AMD driver to have two IDENTITY domains for internal purposes without breaking the check. Have the AMD driver properly declare that the special domain it created is actually an IDENTITY domain. Cc: Robin Murphy <robin.murphy@arm.com> Cc: stable@vger.kernel.org Fixes: 512881eacfa7 ("bus: platform,amba,fsl-mc,PCI: Add device DMA ownership management") Reported-by: Takashi Iwai <tiwai@suse.de> Tested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/0-v1-ea566e16b06b+811-amd_owner_jgg@nvidia.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15iommu/virtio: Fix interaction with VFIOJean-Philippe Brucker1-0/+11
commit 91c98fe7941499e4127cdc359c30841b873dd43a upstream. Commit e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence") requires IOMMU drivers to advertise IOMMU_CAP_CACHE_COHERENCY, in order to be used by VFIO. Since VFIO does not provide to userspace the ability to maintain coherency through cache invalidations, it requires hardware coherency. Advertise the capability in order to restore VFIO support. The meaning of IOMMU_CAP_CACHE_COHERENCY also changed from "IOMMU can enforce cache coherent DMA transactions" to "IOMMU_CACHE is supported". While virtio-iommu cannot enforce coherency (of PCIe no-snoop transactions), it does support IOMMU_CACHE. We can distinguish different cases of non-coherent DMA: (1) When accesses from a hardware endpoint are not coherent. The host would describe such a device using firmware methods ('dma-coherent' in device-tree, '_CCA' in ACPI), since they are also needed without a vIOMMU. In this case mappings are created without IOMMU_CACHE. virtio-iommu doesn't need any additional support. It sends the same requests as for coherent devices. (2) When the physical IOMMU supports non-cacheable mappings. Supporting those would require a new feature in virtio-iommu, new PROBE request property and MAP flags. Device drivers would use a new API to discover this since it depends on the architecture and the physical IOMMU. (3) When the hardware supports PCIe no-snoop. It is possible for assigned PCIe devices to issue no-snoop transactions, and the virtio-iommu specification is lacking any mention of this. Arm platforms don't necessarily support no-snoop, and those that do cannot enforce coherency of no-snoop transactions. Device drivers must be careful about assuming that no-snoop transactions won't end up cached; see commit e02f5c1bb228 ("drm: disable uncached DMA optimization for ARM and arm64"). On x86 platforms, the host may or may not enforce coherency of no-snoop transactions with the physical IOMMU. But according to the above commit, on x86 a driver which assumes that no-snoop DMA is compatible with uncached CPU mappings will also work if the host enforces coherency. Although these issues are not specific to virtio-iommu, it could be used to facilitate discovery and configuration of no-snoop. This would require a new feature bit, PROBE property and ATTACH/MAP flags. Cc: stable@vger.kernel.org Fixes: e8ae0e140c05 ("vfio: Require that devices support DMA cache coherence") Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Link: https://lore.kernel.org/r/20220825154622.86759-1-jean-philippe@linaro.org Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15iommu/vt-d: Correctly calculate sagaw value of IOMMULu Baolu1-3/+25
commit 53fc7ad6edf210b497230ce74b61b322a202470c upstream. The Intel IOMMU driver possibly selects between the first-level and the second-level translation tables for DMA address translation. However, the levels of page-table walks for the 4KB base page size are calculated from the SAGAW field of the capability register, which is only valid for the second-level page table. This causes the IOMMU driver to stop working if the hardware (or the emulated IOMMU) advertises only first-level translation capability and reports the SAGAW field as 0. This solves the above problem by considering both the first level and the second level when calculating the supported page table levels. Fixes: b802d070a52a1 ("iommu/vt-d: Use iova over first level") Cc: stable@vger.kernel.org Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20220817023558.3253263-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15arm64/bti: Disable in kernel BTI when cross section thunks are brokenMark Brown1-0/+2
commit c0a454b9044fdc99486853aa424e5b3be2107078 upstream. GCC does not insert a `bti c` instruction at the beginning of a function when it believes that all callers reach the function through a direct branch[1]. Unfortunately the logic it uses to determine this is not sufficiently robust, for example not taking account of functions being placed in different sections which may be loaded separately, so we may still see thunks being generated to these functions. If that happens, the first instruction in the callee function will result in a Branch Target Exception due to the missing landing pad. While this has currently only been observed in the case of modules having their main code loaded sufficiently far from their init section to require thunks it could potentially happen for other cases so the safest thing is to disable BTI for the kernel when building with an affected toolchain. [1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671 Reported-by: D Scott Phillips <scott@os.amperecomputing.com> [Bits of the commit message are lifted from his report & workaround] Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220905142255.591990-1-broonie@kernel.org Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15hwmon: (asus-ec-sensors) autoload module via DMI dataEugene Shalygin1-186/+222
[ Upstream commit 88700d1396bae72d9a4c23a48bbd98c1c2f53f3d ] Replace autoloading data based on the ACPI EC device with the DMI records for motherboards models. The ACPI method created a bug that when this driver returns error from the probe function because of the unsupported motherboard model, the ACPI subsystem concludes that the EC device does not work properly. Fixes: 5cd29012028d ("hwmon: (asus-ec-sensors) introduce ec_board_info struct for board data") Bug: https://bugzilla.kernel.org/show_bug.cgi?id=216412 Bug: https://bugzilla.redhat.com/show_bug.cgi?id=2121844 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220909155654.123398-2-eugene.shalygin@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (asus-ec-sensors) add definitions for ROG ZENITH II EXTREMEUrs Schroffenegger2-0/+48
[ Upstream commit 9992b19d756ab8f0889fcaf3e71ff93852e74694 ] Add definitions for ROG ZENITH II EXTREME and some unknown yet temperature sensors in the second EC bank. Details are available at [1, 2]. [1] https://github.com/zeule/asus-ec-sensors/pull/26 [2] https://github.com/zeule/asus-ec-sensors/issues/16 Signed-off-by: Urs Schroffenegger <nabajour@lampshade.ch> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220710202639.1812058-2-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Stable-dep-of: 88700d1396ba ("hwmon: (asus-ec-sensors) autoload module via DMI data") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (asus-ec-sensors) add missing sensors for X570-I GAMINGEugene Shalygin1-3/+4
[ Upstream commit 1c4e4f4a0e8d9ebe8be1c838fec4fb7053a989d9 ] VRM and chipset temperature for ROG STRIX X570-I GAMING were missing according to a user contribution to the LHM project [1]. [1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/767 Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220710085539.1682869-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Stable-dep-of: 88700d1396ba ("hwmon: (asus-ec-sensors) autoload module via DMI data") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (asus-ec-sensors) add support for Maximus XI HeroMichael Carns2-0/+38
[ Upstream commit 8f9eb10ff71d8e3beeee3f8d19050223600faf85 ] Add definitions for ROG MAXIMUS XI HERO and ROG MAXIMUS XI HERO (WI-FI) boards. Signed-off-by: Michael Carns <mike@carns.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220627225437.87462-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Stable-dep-of: 88700d1396ba ("hwmon: (asus-ec-sensors) autoload module via DMI data") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (asus-ec-sensors) add support for Strix Z690-a D4Shady Nawara2-0/+19
[ Upstream commit bae26b801f98bc902ab4a43c96947f3a0ce4f3a0 ] adds T_Sensor and VRM Temp sensors for the Asus Strix z690-a D4 motherboard Signed-off-by: Shady Nawara <shady.nawara@outlook.com> Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com> Link: https://lore.kernel.org/r/20220603122758.1561064-1-eugene.shalygin@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Stable-dep-of: 88700d1396ba ("hwmon: (asus-ec-sensors) autoload module via DMI data") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15Revert "arm64: kasan: Revert "arm64: mte: reset the page tag in page->flags""Sasha Levin4-0/+32
This reverts commit add4bc9281e8704e5ab15616b429576c84f453a2. On Mon, Sep 12, 2022 at 10:52:45AM +0100, Catalin Marinas wrote: >I missed this (holidays) and it looks like it's in stable already. On >its own it will likely break kasan_hw if used together with user-space >MTE as this change relies on two previous commits: > >70c248aca9e7 ("mm: kasan: Skip unpoisoning of user pages") >6d05141a3930 ("mm: kasan: Skip page unpoisoning only if __GFP_SKIP_KASAN_UNPOISON") > >The reason I did not cc stable is that there are other dependencies in >this area. The potential issues without the above commits were rather >theoretical, so take these patches rather as clean-ups/refactoring than >fixes. Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15perf stat: Fix L2 Topdown metrics disappear for raw eventsZhengjun Xing1-2/+3
[ Upstream commit f0c86a2bae4fd12bfa8bad4d43fb59fb498cdd14 ] In perf/Documentation/perf-stat.txt, for "--td-level" the default "0" means the max level that the current hardware support. So we need initialize the stat_config.topdown_level to TOPDOWN_MAX_LEVEL when “--td-level=0” or no “--td-level” option. Otherwise, for the hardware with a max level is 2, the 2nd level metrics disappear for raw events in this case. The issue cannot be observed for the perf stat default or "--topdown" options. This commit fixes the raw events issue and removes the duplicated code for the perf stat default. Before: # ./perf stat -e "cpu-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,ref-cycles,branches,branch-misses,{slots,topdown-retiring,topdown-bad-spec,topdown-fe-bound,topdown-be-bound,topdown-heavy-ops,topdown-br-mispredict,topdown-fetch-lat,topdown-mem-bound}" sleep 1 Performance counter stats for 'sleep 1': 1.03 msec cpu-clock # 0.001 CPUs utilized 1 context-switches # 966.216 /sec 0 cpu-migrations # 0.000 /sec 60 page-faults # 57.973 K/sec 1,132,112 instructions # 1.41 insn per cycle 803,872 cycles # 0.777 GHz 1,909,120 ref-cycles # 1.845 G/sec 236,634 branches # 228.640 M/sec 6,367 branch-misses # 2.69% of all branches 4,823,232 slots # 4.660 G/sec 1,210,536 topdown-retiring # 25.1% Retiring 699,841 topdown-bad-spec # 14.5% Bad Speculation 1,777,975 topdown-fe-bound # 36.9% Frontend Bound 1,134,878 topdown-be-bound # 23.5% Backend Bound 189,146 topdown-heavy-ops # 182.756 M/sec 662,012 topdown-br-mispredict # 639.647 M/sec 1,097,048 topdown-fetch-lat # 1.060 G/sec 416,121 topdown-mem-bound # 402.063 M/sec 1.002423690 seconds time elapsed 0.002494000 seconds user 0.000000000 seconds sys After: # ./perf stat -e "cpu-clock,context-switches,cpu-migrations,page-faults,instructions,cycles,ref-cycles,branches,branch-misses,{slots,topdown-retiring,topdown-bad-spec,topdown-fe-bound,topdown-be-bound,topdown-heavy-ops,topdown-br-mispredict,topdown-fetch-lat,topdown-mem-bound}" sleep 1 Performance counter stats for 'sleep 1': 1.13 msec cpu-clock # 0.001 CPUs utilized 1 context-switches # 882.128 /sec 0 cpu-migrations # 0.000 /sec 61 page-faults # 53.810 K/sec 1,137,612 instructions # 1.29 insn per cycle 881,477 cycles # 0.778 GHz 2,093,496 ref-cycles # 1.847 G/sec 236,356 branches # 208.496 M/sec 7,090 branch-misses # 3.00% of all branches 5,288,862 slots # 4.665 G/sec 1,223,697 topdown-retiring # 23.1% Retiring 767,403 topdown-bad-spec # 14.5% Bad Speculation 2,053,322 topdown-fe-bound # 38.8% Frontend Bound 1,244,438 topdown-be-bound # 23.5% Backend Bound 186,665 topdown-heavy-ops # 3.5% Heavy Operations # 19.6% Light Operations 725,922 topdown-br-mispredict # 13.7% Branch Mispredict # 0.8% Machine Clears 1,327,400 topdown-fetch-lat # 25.1% Fetch Latency # 13.7% Fetch Bandwidth 497,775 topdown-mem-bound # 9.4% Memory Bound # 14.1% Core Bound 1.002701530 seconds time elapsed 0.002744000 seconds user 0.000000000 seconds sys Fixes: 63e39aa6ae103451 ("perf stat: Support L2 Topdown events") Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220826140057.3289401-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15perf evlist: Always use arch_evlist__add_default_attrs()Kan Liang4-6/+23
[ Upstream commit a9c1ecdabc4f2ef04ef5334b8deb3a5c5910136d ] Current perf stat uses the evlist__add_default_attrs() to add the generic default attrs, and uses arch_evlist__add_default_attrs() to add the Arch specific default attrs, e.g., Topdown for x86. It works well for the non-hybrid platforms. However, for a hybrid platform, the hard code generic default attrs don't work. Uses arch_evlist__add_default_attrs() to replace the evlist__add_default_attrs(). The arch_evlist__add_default_attrs() is modified to invoke the same __evlist__add_default_attrs() for the generic default attrs. No functional change. Add default_null_attrs[] to indicate the arch specific attrs. No functional change for the arch specific default attrs either. Signed-off-by: Kan Liang <kan.liang@linux.intel.com> Acked-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220721065706.2886112-4-zhengjun.xing@linux.intel.com Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Stable-dep-of: f0c86a2bae4f ("perf stat: Fix L2 Topdown metrics disappear for raw events") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15iommu/vt-d: Fix possible recursive locking in intel_iommu_init()Lu Baolu3-26/+12
[ Upstream commit 9cd4f1434479f1ac25c440c421fbf52069079914 ] The global rwsem dmar_global_lock was introduced by commit 3a5670e8ac932 ("iommu/vt-d: Introduce a rwsem to protect global data structures"). It is used to protect DMAR related global data from DMAR hotplug operations. The dmar_global_lock used in the intel_iommu_init() might cause recursive locking issue, for example, intel_iommu_get_resv_regions() is taking the dmar_global_lock from within a section where intel_iommu_init() already holds it via probe_acpi_namespace_devices(). Using dmar_global_lock in intel_iommu_init() could be relaxed since it is unlikely that any IO board must be hot added before the IOMMU subsystem is initialized. This eliminates the possible recursive locking issue by moving down DMAR hotplug support after the IOMMU is initialized and removing the uses of dmar_global_lock in intel_iommu_init(). Fixes: d5692d4af08cd ("iommu/vt-d: Fix suspicious RCU usage in probe_acpi_namespace_devices()") Reported-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Link: https://lore.kernel.org/r/894db0ccae854b35c73814485569b634237b5538.1657034828.git.robin.murphy@arm.com Link: https://lore.kernel.org/r/20220718235325.3952426-1-baolu.lu@linux.intel.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (mr75203) enable polling for all VM channelsEliav Farber1-0/+13
[ Upstream commit e43212e0f55dc2d6b15d6c174cc0a64b25fab5e7 ] Configure ip-polling register to enable polling for all voltage monitor channels. This enables reading the voltage values for all inputs other than just input 0. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-7-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (mr75203) fix multi-channel voltage readingEliav Farber1-12/+17
[ Upstream commit 91a9e063cdcfca8fe642b078d6fae4ce49187975 ] Fix voltage allocation and reading to support all channels in all VMs. Prior to this change allocation and reading were done only for the first channel in each VM. This change counts the total number of channels for allocation, and takes into account the channel offset when reading the sample data register. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-6-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (mr75203) fix voltage equation for negative source inputEliav Farber1-2/+12
[ Upstream commit 227a3a2fc31d8e4bb9c88d4804e19530af245b1b ] According to Moortec Embedded Voltage Monitor (MEVM) series 3 data sheet, the minimum input signal is -100mv and maximum input signal is +1000mv. The equation used to convert the digital word to voltage uses mixed types (*val signed and n unsigned), and on 64 bit machines also has different size, since sizeof(u32) = 4 and sizeof(long) = 8. So when measuring a negative input, n will be small enough, such that PVT_N_CONST * n < PVT_R_CONST, and the result of (PVT_N_CONST * n - PVT_R_CONST) will overflow to a very big positive 32 bit number. Then when storing the result in *val it will be the same value just in 64 bit (instead of it representing a negative number which will what happen when sizeof(long) = 4). When -1023 <= (PVT_N_CONST * n - PVT_R_CONST) <= -1 dividing the number by 1024 should result of in 0, but because ">> 10" is used, and the sign bit is used to fill the vacated bit positions, it results in -1 (0xf...fffff) which is wrong. This change fixes the sign problem and supports negative values by casting n to long and replacing the shift right with div operation. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-5-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (mr75203) update pvt->v_num and vm_num to the actual number of used ↵Eliav Farber1-0/+2
sensors [ Upstream commit bb9195bd6664d94d71647631593e09f705ff5edd ] This issue is relevant when "intel,vm-map" is set in device-tree, and defines a lower number of VMs than actually supported. This change is needed for all places that use pvt->v_num or vm_num later on in the code. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-4-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not definedEliav Farber1-8/+6
[ Upstream commit 81114fc3d27bf5b06b2137d2fd2b63da656a8b90 ] Bug - in case "intel,vm-map" is missing in device-tree ,'num' is set to 0, and no voltage channel infos are allocated. The reason num is set to 0 when "intel,vm-map" is missing is to set the entire pvt->vm_idx[] with incremental channel numbers, but it didn't take into consideration that same num is used later in devm_kcalloc(). If "intel,vm-map" does exist there is no need to set the unspecified channels with incremental numbers, because the unspecified channels can't be accessed in pvt_read_in() which is the only other place besides the probe functions that uses pvt->vm_idx[]. This change fixes the bug by moving the incremental channel numbers setting to be done only if "intel,vm-map" property is defined (starting loop from 0), and removing 'num = 0'. Fixes: 9d823351a337 ("hwmon: Add hardware monitoring driver for Moortec MR75203 PVT controller") Signed-off-by: Eliav Farber <farbere@amazon.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20220908152449.35457-3-farbere@amazon.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net: dsa: felix: tc-taprio intervals smaller than MTU should send at least ↵Vladimir Oltean1-4/+31
one packet [ Upstream commit 11afdc6526de0e0368c05da632a8c0d29fc60bb8 ] The blamed commit broke tc-taprio schedules such as this one: tc qdisc replace dev $swp1 root taprio \ num_tc 8 \ map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 \ base-time 0 \ sched-entry S 0x7f 990000 \ sched-entry S 0x80 10000 \ flags 0x2 because the gate entry for TC 7 (S 0x80 10000 ns) now has a static guard band added earlier than its 'gate close' event, such that packet overruns won't occur in the worst case of the largest packet possible. Since guard bands are statically determined based on the per-tc QSYS_QMAXSDU_CFG_* with a fallback on the port-based QSYS_PORT_MAX_SDU, we need to discuss what happens with TC 7 depending on kernel version, since the driver, prior to commit 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port"), did not touch QSYS_QMAXSDU_CFG_*, and therefore relied on QSYS_PORT_MAX_SDU. 1 (before vsc9959_tas_guard_bands_update): QSYS_PORT_MAX_SDU defaults to 1518, and at gigabit this introduces a static guard band (independent of packet sizes) of 12144 ns, plus QSYS::HSCH_MISC_CFG.FRM_ADJ (bit time of 20 octets => 160 ns). But this is larger than the time window itself, of 10000 ns. So, the queue system never considers a frame with TC 7 as eligible for transmission, since the gate practically never opens, and these frames are forever stuck in the TX queues and hang the port. 2 (after vsc9959_tas_guard_bands_update): Under the sole goal of enabling oversized frame dropping, we make an effort to set QSYS_QMAXSDU_CFG_7 to 1230 bytes. But QSYS_QMAXSDU_CFG_7 plays one more role, which we did not take into account: per-tc static guard band, expressed in L2 byte time (auto-adjusted for FCS and L1 overhead). There is a discrepancy between what the driver thinks (that there is no guard band, and 100% of min_gate_len[tc] is available for egress scheduling) and what the hardware actually does (crops the equivalent of QSYS_QMAXSDU_CFG_7 ns out of min_gate_len[tc]). In practice, this means that the hardware thinks it has exactly 0 ns for scheduling tc 7. In both cases, even minimum sized Ethernet frames are stuck on egress rather than being considered for scheduling on TC 7, even if they would fit given a proper configuration. Considering the current situation, with vsc9959_tas_guard_bands_update(), frames between 60 octets and 1230 octets in size are not eligible for oversized dropping (because they are smaller than QSYS_QMAXSDU_CFG_7), but won't be considered as eligible for scheduling either, because the min_gate_len[7] (10000 ns) minus the guard band determined by QSYS_QMAXSDU_CFG_7 (1230 octets * 8 ns per octet == 9840 ns) minus the guard band auto-added for L1 overhead by QSYS::HSCH_MISC_CFG.FRM_ADJ (20 octets * 8 ns per octet == 160 octets) leaves 0 ns for scheduling in the queue system proper. Investigating the hardware behavior, it becomes apparent that the queue system needs precisely 33 ns of 'gate open' time in order to consider a frame as eligible for scheduling to a tc. So the solution to this problem is to amend vsc9959_tas_guard_bands_update(), by giving the per-tc guard bands less space by exactly 33 ns, just enough for one frame to be scheduled in that interval. This allows the queue system to make forward progress for that port-tc, and prevents it from hanging. Fixes: 297c4de6f780 ("net: dsa: felix: re-enable TAS guard band mode") Reported-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15time64.h: consolidate uses of PSEC_PER_NSECVladimir Oltean3-4/+9
[ Upstream commit 837ced3a1a5d8bb1a637dd584711f31ae6b54d93 ] Time-sensitive networking code needs to work with PTP times expressed in nanoseconds, and with packet transmission times expressed in picoseconds, since those would be fractional at higher than gigabit speed when expressed in nanoseconds. Convert the existing uses in tc-taprio and the ocelot/felix DSA driver to a PSEC_PER_NSEC macro. This macro is placed in include/linux/time64.h as opposed to its relatives (PSEC_PER_SEC etc) from include/vdso/time64.h because the vDSO library does not (yet) need/use it. Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com> # for the vDSO parts Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15s390/boot: fix absolute zero lowcore corruption on bootAlexander Gordeev2-1/+2
[ Upstream commit 12dd19c159659ec9050f45dc8a2ff3c3917f4be3 ] Crash dump always starts on CPU0. In case CPU0 is offline the prefix page is not installed and the absolute zero lowcore is used. However, struct lowcore::mcesad is never assigned and stays zero. That leads to __machine_kdump() -> save_vx_regs() call silently stores vector registers to the absolute lowcore at 0x11b0 offset. Fixes: a62bc0739253 ("s390/kdump: add support for vector extension") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15iommu/amd: use full 64-bit value in build_completion_wait()John Sperbeck1-1/+2
[ Upstream commit 94a568ce32038d8ff9257004bb4632e60eb43a49 ] We started using a 64 bit completion value. Unfortunately, we only stored the low 32-bits, so a very large completion value would never be matched in iommu_completion_wait(). Fixes: c69d89aff393 ("iommu/amd: Use 4K page for completion wait write-back semaphore") Signed-off-by: John Sperbeck <jsperbeck@google.com> Link: https://lore.kernel.org/r/20220801192229.3358786-1-jsperbeck@google.com Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15swiotlb: avoid potential left shift overflowChao Gao1-1/+4
[ Upstream commit 3f0461613ebcdc8c4073e235053d06d5aa58750f ] The second operand passed to slot_addr() is declared as int or unsigned int in all call sites. The left-shift to get the offset of a slot can overflow if swiotlb size is larger than 4G. Convert the macro to an inline function and declare the second argument as phys_addr_t to avoid the potential overflow. Fixes: 26a7e094783d ("swiotlb: refactor swiotlb_tbl_map_single") Signed-off-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15bonding: accept unsolicited NA messageHangbin Liu1-5/+12
[ Upstream commit 592335a4164c3c41f57967223a1e1efe3a0c6eb3 ] The unsolicited NA message with all-nodes multicast dest address should be valid, as this also means the link could reach the target. Also rename bond_validate_ns() to bond_validate_na(). Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net: bonding: replace dev_trans_start() with the jiffies of the last ARP/NSVladimir Oltean2-16/+32
[ Upstream commit 06799a9085e12a778fe2851db550ab5911ad28fe ] The bonding driver piggybacks on time stamps kept by the network stack for the purpose of the netdev TX watchdog, and this is problematic because it does not work with NETIF_F_LLTX devices. It is hard to say why the driver looks at dev_trans_start() of the slave->dev, considering that this is updated even by non-ARP/NS probes sent by us, and even by traffic not sent by us at all (for example PTP on physical slave devices). ARP monitoring in active-backup mode appears to still work even if we track only the last TX time of actual ARP probes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 592335a4164c ("bonding: accept unsolicited NA message") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15i40e: Fix ADQ rate limiting for PFPrzemyslaw Patynowski2-1/+5
[ Upstream commit 45bb006d3c924b1201ed43c87a96b437662dcaa8 ] Fix HW rate limiting for ADQ. Fallback to kernel queue selection for ADQ, as it is network stack that decides which queue to use for transmit with ADQ configured. Reset PF after creation of VMDq2 VSIs required for ADQ, as to reprogram TX queue contexts in i40e_configure_tx_ring. Without this patch PF would limit TX rate only according to TC0. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15i40e: Refactor tc mqprio checksPrzemyslaw Patynowski3-11/+25
[ Upstream commit 2313e69c84c024a85d017a60ae925085de47530a ] Refactor bitwise checks for whether TC MQPRIO is enabled into one single method for improved readability. Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Stable-dep-of: 45bb006d3c92 ("i40e: Fix ADQ rate limiting for PF") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15kbuild: disable header exports for UML in a straightforward wayMasahiro Yamada1-2/+1
[ Upstream commit 1b620d539ccc18a1aca1613d9ff078115a7891a1 ] Previously 'make ARCH=um headers' stopped because of missing arch/um/include/uapi/asm/Kbuild. The error is not shown since commit ed102bf2afed ("um: Fix W=1 missing-include-dirs warnings") added arch/um/include/uapi/asm/Kbuild. Hard-code the unsupported architecture, so it works like before. Fixes: ed102bf2afed ("um: Fix W=1 missing-include-dirs warnings") Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15MIPS: loongson32: ls1c: Fix hang during startupYang Ling1-1/+0
[ Upstream commit 35508d2424097f9b6a1a17aac94f702767035616 ] The RTCCTRL reg of LS1C is obselete. Writing this reg will cause system hang. Fixes: 60219c563c9b6 ("MIPS: Add RTC support for Loongson1C board") Signed-off-by: Yang Ling <gnaygnil@gmail.com> Tested-by: Keguang Zhang <keguang.zhang@gmail.com> Acked-by: Keguang Zhang <keguang.zhang@gmail.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15Smack: Provide read control for io_uring_cmdCasey Schaufler1-0/+32
commit dd9373402280cf4715fdc8fd5070f7d039e43511 upstream. Limit io_uring "cmd" options to files for which the caller has Smack read access. There may be cases where the cmd option may be closer to a write access than a read, but there is no way to make that determination. Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Casey Schaufler <casey@schaufler-ca.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15selinux: implement the security_uring_cmd() LSM hookPaul Moore2-1/+25
commit f4d653dcaa4e4056e1630423e6a8ece4869b544f upstream. Add a SELinux access control for the iouring IORING_OP_URING_CMD command. This includes the addition of a new permission in the existing "io_uring" object class: "cmd". The subject of the new permission check is the domain of the process requesting access, the object is the open file which points to the device/file that is the target of the IORING_OP_URING_CMD operation. A sample policy rule is shown below: allow <domain> <file>:io_uring { cmd }; Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15lsm,io_uring: add LSM hooks for the new uring_cmd file opLuis Chamberlain5-0/+17
commit 2a5840124009f133bd09fd855963551fb2cefe22 upstream. io-uring cmd support was added through ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd"), this extended the struct file_operations to allow a new command which each subsystem can use to enable command passthrough. Add an LSM specific for the command passthrough which enables LSMs to inspect the command details. This was discussed long ago without no clear pointer for something conclusive, so this enables LSMs to at least reject this new file operation. [0] https://lkml.kernel.org/r/8adf55db-7bab-f59d-d612-ed906b948d19@schaufler-ca.com Cc: stable@vger.kernel.org Fixes: ee692a21e9bf ("fs,io_uring: add infrastructure for uring-cmd") Signed-off-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15ASoC: mchp-spdiftx: Fix clang -Wbitfield-constant-conversionNathan Chancellor1-1/+1
commit 5c5c2baad2b55cc0a4b190266889959642298f79 upstream. A recent change in clang strengthened its -Wbitfield-constant-conversion to warn when 1 is assigned to a 1-bit signed integer bitfield, as it can only be 0 or -1, not 1: sound/soc/atmel/mchp-spdiftx.c:505:20: error: implicit truncation from 'int' to bit-field changes value from 1 to -1 [-Werror,-Wbitfield-constant-conversion] dev->gclk_enabled = 1; ^ ~ 1 error generated. The actual value of the field is never checked, just that it is not zero, so there is not a real bug here. However, it is simple enough to silence the warning by making the bitfield unsigned, which matches the mchp-spdifrx driver. Fixes: 06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller") Link: https://github.com/ClangBuiltLinux/linux/issues/1686 Link: https://github.com/llvm/llvm-project/commit/82afc9b169a67e8b8a1862fb9c41a2cd974d6691 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20220810010809.2024482-1-nathan@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15ASoC: mchp-spdiftx: remove references to mchp_i2s_capsClaudiu Beznea1-8/+0
commit 403fcb5118a0f4091001a537e76923031fb45eaf upstream. Remove references to struct mchp_i2s_caps as they are not used. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220727090814.2446111-3-claudiu.beznea@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15hwmon: (tps23861) fix byte order in resistance registerAlexandru Gagniuc1-4/+6
commit 1f05f65bddd6958d25b133f886da49c1d4bff3fa upstream. The tps23861 registers are little-endian, and regmap_read_bulk() does not do byte order conversion. On BE machines, the bytes were swapped, and the interpretation of the resistance value was incorrect. To make it work on both big and little-endian machines, use le16_to_cpu() to convert the resitance register to host byte order. Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Fixes: fff7b8ab22554 ("hwmon: add Texas Instruments TPS23861 driver") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220905142806.110598-1-mr.nuke.me@gmail.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-15perf record: Fix synthesis failure warningsAdrian Hunter1-2/+6
[ Upstream commit faf59ec8c3c3708c64ff76b50e6f757c6b4a1054 ] Some calls to synthesis functions set err < 0 but only warn about the failure and continue. However they do not set err back to zero, relying on subsequent code to do that. That changed with the introduction of option --synth. When --synth=no subsequent functions that set err back to zero are not called. Fix by setting err = 0 in those cases. Example: Before: $ perf record --no-bpf-event --synth=all -o /tmp/huh uname Couldn't synthesize bpf events. Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ] $ perf record --no-bpf-event --synth=no -o /tmp/huh uname Couldn't synthesize bpf events. After: $ perf record --no-bpf-event --synth=no -o /tmp/huh uname Couldn't synthesize bpf events. Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.014 MB /tmp/huh (7 samples) ] Fixes: 41b740b6e8a994e5 ("perf record: Add --synth option") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220907162458.72817-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15perf script: Fix Cannot print 'iregs' field for hybrid systemsZhengjun Xing1-0/+3
[ Upstream commit 82b2425fad2dd47204b3da589b679220f8aacc0e ] Commit b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records") adds a dummy event on hybrid systems to fix the symbol "unknown" issue when the workload is created in a P-core but runs on an E-core. The added dummy event will cause "perf script -F iregs" to fail. Dummy events do not have "iregs" attribute set, so when we do evsel__check_attr, the "iregs" attribute check will fail, so the issue happened. The following commit [1] has fixed a similar issue by skipping the attr check for the dummy event because it does not have any samples anyway. It works okay for the normal mode, but the issue still happened when running the test in the pipe mode. In the pipe mode, it calls process_attr() which still checks the attr for the dummy event. This commit fixed the issue by skipping the attr check for the dummy event in the API evsel__check_attr, Otherwise, we have to patch everywhere when evsel__check_attr() is called. Before: #./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5 Samples for 'dummy:HG' event do not have IREGS attribute set. Cannot print 'iregs' field. 0x120 [0x90]: failed to process type: 64 # After: # ./perf record -o - --intr-regs=di,r8,dx,cx -e br_inst_retired.near_call:p -c 1000 --per-thread true 2>/dev/null|./perf script -F iregs |head -5 ABI:2 CX:0x55b8efa87000 DX:0x55b8efa7e000 DI:0xffffba5e625efbb0 R8:0xffff90e51f8ae100 ABI:2 CX:0x7f1dae1e4000 DX:0xd0 DI:0xffff90e18c675ac0 R8:0x71 ABI:2 CX:0xcc0 DX:0x1 DI:0xffff90e199880240 R8:0x0 ABI:2 CX:0xffff90e180dd7500 DX:0xffff90e180dd7500 DI:0xffff90e180043500 R8:0x1 ABI:2 CX:0x50 DX:0xffff90e18c583bd0 DI:0xffff90e1998803c0 R8:0x58 # [1]https://lore.kernel.org/lkml/20220831124041.219925-1-jolsa@kernel.org/ Fixes: b91e5492f9d7ca89 ("perf record: Add a dummy event on hybrid systems to collect metadata records") Suggested-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220908070030.3455164-1-zhengjun.xing@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15perf dlfilter dlfilter-show-cycles: Fix types for print formatAdrian Hunter1-2/+2
[ Upstream commit 1706623e940347ad23fdf77910eca4905dc37f91 ] Avoid compiler warning about format %llu that expects long long unsigned int but argument has type __u64. Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com> Fixes: c3afd6e50fce824f ("perf dlfilter: Add dlfilter-show-cycles") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20220905074735.4513-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15libperf evlist: Fix per-thread mmaps for multi-threaded targetsAdrian Hunter1-0/+50
[ Upstream commit 7864d8f7c088aad988c44c631f1ceed9179cf2cf ] The offending commit removed mmap_per_thread(), which did not consider the different set-output rules for per-thread mmaps i.e. in the per-thread case set-output is used for file descriptors of the same thread not the same cpu. This was not immediately noticed because it only happens with multi-threaded targets and we do not have a test for that yet. Reinstate mmap_per_thread() expanding it to cover also system-wide per-cpu events i.e. to continue to allow the mixing of per-thread and per-cpu mmaps. Debug messages (with -vv) show the file descriptors that are opened with sys_perf_event_open. New debug messages are added (needs -vvv) that show also which file descriptors are mmapped and which are redirected with set-output. In the per-cpu case (cpu != -1) file descriptors for the same CPU are set-output to the first file descriptor for that CPU. In the per-thread case (cpu == -1) file descriptors for the same thread are set-output to the first file descriptor for that thread. Example (process 17489 has 2 threads): Before (but with new debug prints): $ perf record --no-bpf-event -vvv --per-thread -p 17489 <SNIP> sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6 <SNIP> libperf: idx 0: mmapping fd 5 libperf: idx 0: set output fd 6 -> 5 failed to mmap with 22 (Invalid argument) After: $ perf record --no-bpf-event -vvv --per-thread -p 17489 <SNIP> sys_perf_event_open: pid 17489 cpu -1 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 17490 cpu -1 group_fd -1 flags 0x8 = 6 <SNIP> libperf: mmap_per_thread: nr cpu values (may include -1) 1 nr threads 2 libperf: idx 0: mmapping fd 5 libperf: idx 1: mmapping fd 6 <SNIP> [ perf record: Woken up 2 times to write data ] [ perf record: Captured and wrote 0.018 MB perf.data (15 samples) ] Per-cpu example (process 20341 has 2 threads, same as above): $ perf record --no-bpf-event -vvv -p 20341 <SNIP> sys_perf_event_open: pid 20341 cpu 0 group_fd -1 flags 0x8 = 5 sys_perf_event_open: pid 20342 cpu 0 group_fd -1 flags 0x8 = 6 sys_perf_event_open: pid 20341 cpu 1 group_fd -1 flags 0x8 = 7 sys_perf_event_open: pid 20342 cpu 1 group_fd -1 flags 0x8 = 8 sys_perf_event_open: pid 20341 cpu 2 group_fd -1 flags 0x8 = 9 sys_perf_event_open: pid 20342 cpu 2 group_fd -1 flags 0x8 = 10 sys_perf_event_open: pid 20341 cpu 3 group_fd -1 flags 0x8 = 11 sys_perf_event_open: pid 20342 cpu 3 group_fd -1 flags 0x8 = 12 sys_perf_event_open: pid 20341 cpu 4 group_fd -1 flags 0x8 = 13 sys_perf_event_open: pid 20342 cpu 4 group_fd -1 flags 0x8 = 14 sys_perf_event_open: pid 20341 cpu 5 group_fd -1 flags 0x8 = 15 sys_perf_event_open: pid 20342 cpu 5 group_fd -1 flags 0x8 = 16 sys_perf_event_open: pid 20341 cpu 6 group_fd -1 flags 0x8 = 17 sys_perf_event_open: pid 20342 cpu 6 group_fd -1 flags 0x8 = 18 sys_perf_event_open: pid 20341 cpu 7 group_fd -1 flags 0x8 = 19 sys_perf_event_open: pid 20342 cpu 7 group_fd -1 flags 0x8 = 20 <SNIP> libperf: mmap_per_cpu: nr cpu values 8 nr threads 2 libperf: idx 0: mmapping fd 5 libperf: idx 0: set output fd 6 -> 5 libperf: idx 1: mmapping fd 7 libperf: idx 1: set output fd 8 -> 7 libperf: idx 2: mmapping fd 9 libperf: idx 2: set output fd 10 -> 9 libperf: idx 3: mmapping fd 11 libperf: idx 3: set output fd 12 -> 11 libperf: idx 4: mmapping fd 13 libperf: idx 4: set output fd 14 -> 13 libperf: idx 5: mmapping fd 15 libperf: idx 5: set output fd 16 -> 15 libperf: idx 6: mmapping fd 17 libperf: idx 6: set output fd 18 -> 17 libperf: idx 7: mmapping fd 19 libperf: idx 7: set output fd 20 -> 19 <SNIP> [ perf record: Woken up 7 times to write data ] [ perf record: Captured and wrote 0.020 MB perf.data (17 samples) ] Fixes: ae4f8ae16a078964 ("libperf evlist: Allow mixing per-thread and per-cpu mmaps") Reported-by: Tomáš Trnka <trnka@scm.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216441 Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: https://lore.kernel.org/r/20220905114209.8389-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15sch_sfb: Also store skb len before calling child enqueueToke Høiland-Jørgensen1-1/+2
[ Upstream commit 2f09707d0c972120bf794cfe0f0c67e2c2ddb252 ] Cong Wang noticed that the previous fix for sch_sfb accessing the queued skb after enqueueing it to a child qdisc was incomplete: the SFB enqueue function was also calling qdisc_qstats_backlog_inc() after enqueue, which reads the pkt len from the skb cb field. Fix this by also storing the skb len, and using the stored value to increment the backlog after enqueueing. Fixes: 9efd23297cca ("sch_sfb: Don't assume the skb is still around after enqueueing to child") Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Acked-by: Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220905192137.965549-1-toke@toke.dk Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net: phy: lan87xx: change interrupt src of link_up to comm_readyArun Ramadoss1-4/+54
[ Upstream commit 5382033a35227c57a349d74752ad2527780159a9 ] Currently phy link up/down interrupt is enabled using the LAN87xx_INTERRUPT_MASK register. In the lan87xx_read_status function, phy link is determined using the T1_MODE_STAT_REG register comm_ready bit. comm_ready bit is set using the loc_rcvr_status & rem_rcvr_status. Whenever the phy link is up, LAN87xx_INTERRUPT_SOURCE link_up bit is set first but comm_ready bit takes some time to set based on local and remote receiver status. As per the current implementation, interrupt is triggered using link_up but the comm_ready bit is still cleared in the read_status function. So, link is always down. Initially tested with the shared interrupt mechanism with switch and internal phy which is working, but after implementing interrupt controller it is not working. It can fixed either by updating the read_status function to read from LAN87XX_INTERRUPT_SOURCE register or enable the interrupt mask for comm_ready bit. But the validation team recommends the use of comm_ready for link detection. This patch fixes by enabling the comm_ready bit for link_up in the LAN87XX_INTERRUPT_MASK_2 register (MISC Bank) and link_down in LAN87xx_INTERRUPT_MASK register. Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220905152750.5079-1-arun.ramadoss@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15io_uring: recycle kbuf recycle on tw requeuePavel Begunkov1-0/+1
[ Upstream commit 336d28a8f38013a069f2d46e73aaa1880ef17a47 ] When we queue a request via tw for execution it's not going to be executed immediately, so when io_queue_async() hits IO_APOLL_READY and queues a tw but doesn't try to recycle/consume the buffer some other request may try to use the the buffer. Fixes: c7fb19428d67 ("io_uring: add support for ring mapped supplied buffers") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/a19bc9e211e3184215a58e129b62f440180e9212.1662480490.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net/smc: Fix possible access to freed memory in link clearYacan Liu4-0/+13
[ Upstream commit e9b1a4f867ae9c1dbd1d71cd09cbdb3239fb4968 ] After modifying the QP to the Error state, all RX WR would be completed with WC in IB_WC_WR_FLUSH_ERR status. Current implementation does not wait for it is done, but destroy the QP and free the link group directly. So there is a risk that accessing the freed memory in tasklet context. Here is a crash example: BUG: unable to handle page fault for address: ffffffff8f220860 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page PGD f7300e067 P4D f7300e067 PUD f7300f063 PMD 8c4e45063 PTE 800ffff08c9df060 Oops: 0002 [#1] SMP PTI CPU: 1 PID: 0 Comm: swapper/1 Kdump: loaded Tainted: G S OE 5.10.0-0607+ #23 Hardware name: Inspur NF5280M4/YZMB-00689-101, BIOS 4.1.20 07/09/2018 RIP: 0010:native_queued_spin_lock_slowpath+0x176/0x1b0 Code: f3 90 48 8b 32 48 85 f6 74 f6 eb d5 c1 ee 12 83 e0 03 83 ee 01 48 c1 e0 05 48 63 f6 48 05 00 c8 02 00 48 03 04 f5 00 09 98 8e <48> 89 10 8b 42 08 85 c0 75 09 f3 90 8b 42 08 85 c0 74 f7 48 8b 32 RSP: 0018:ffffb3b6c001ebd8 EFLAGS: 00010086 RAX: ffffffff8f220860 RBX: 0000000000000246 RCX: 0000000000080000 RDX: ffff91db1f86c800 RSI: 000000000000173c RDI: ffff91db62bace00 RBP: ffff91db62bacc00 R08: 0000000000000000 R09: c00000010000028b R10: 0000000000055198 R11: ffffb3b6c001ea58 R12: ffff91db80e05010 R13: 000000000000000a R14: 0000000000000006 R15: 0000000000000040 FS: 0000000000000000(0000) GS:ffff91db1f840000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffff8f220860 CR3: 00000001f9580004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> _raw_spin_lock_irqsave+0x30/0x40 mlx5_ib_poll_cq+0x4c/0xc50 [mlx5_ib] smc_wr_rx_tasklet_fn+0x56/0xa0 [smc] tasklet_action_common.isra.21+0x66/0x100 __do_softirq+0xd5/0x29c asm_call_irq_on_stack+0x12/0x20 </IRQ> do_softirq_own_stack+0x37/0x40 irq_exit_rcu+0x9d/0xa0 sysvec_call_function_single+0x34/0x80 asm_sysvec_call_function_single+0x12/0x20 Fixes: bd4ad57718cc ("smc: initialize IB transport incl. PD, MR, QP, CQ, event, WR") Signed-off-by: Yacan Liu <liuyacan@corp.netease.com> Reviewed-by: Tony Lu <tonylu@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net: ethernet: mtk_eth_soc: check max allowed hash in mtk_ppe_check_skbLorenzo Bianconi1-0/+3
[ Upstream commit f27b405ef43319a3ceefc2123245201a63ed4e00 ] Even if max hash configured in hw in mtk_ppe_hash_entry is MTK_PPE_ENTRIES - 1, check theoretical OOB accesses in mtk_ppe_check_skb routine Fixes: c4f033d9e03e9 ("net: ethernet: mtk_eth_soc: rework hardware flow table management") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net: ethernet: mtk_eth_soc: fix typo in __mtk_foe_entry_clearLorenzo Bianconi1-1/+1
[ Upstream commit 0e80707d94e4c88f9879bdafcbaceb13432ec1f4 ] Set ib1 state to MTK_FOE_STATE_UNBIND in __mtk_foe_entry_clear routine. Fixes: 33fc42de33278 ("net: ethernet: mtk_eth_soc: support creating mac address based offload entries") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net: dsa: felix: access QSYS_TAG_CONFIG under tas_lock in ↵Vladimir Oltean1-2/+2
vsc9959_sched_speed_set [ Upstream commit a4bb481aeb9d84cb53112a478e6db4705b794c34 ] The read-modify-write of QSYS_TAG_CONFIG from vsc9959_sched_speed_set() runs unlocked with respect to the other functions that access it, which are vsc9959_tas_guard_bands_update(), vsc9959_qos_port_tas_set() and vsc9959_tas_clock_adjust(). All the others are under ocelot->tas_lock, so move the vsc9959_sched_speed_set() access under that lock as well, to resolve the concurrency. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-15net: dsa: felix: disable cut-through forwarding for frames oversized for ↵Vladimir Oltean1-43/+79
tc-taprio [ Upstream commit 843794bbdef83955ae5b43dfafc355c3786e2145 ] Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605, frames even way larger than 601 octets are transmitted even though these should be considered as oversized, according to the documentation, and dropped. Since oversized frame dropping depends on frame size, which is only known at the EOF stage, and therefore not at SOF when cut-through forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_* into consideration for traffic classes that are cut-through. Since cut-through forwarding has no UAPI to control it, and the driver enables it based on the mantra "if we can, then why not", the strategy is to alter vsc9959_cut_through_fwd() to take into consideration which tc's have oversize frame dropping enabled, and disable cut-through for them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the cut-through determination process. There are 2 strategies for vsc9959_cut_through_fwd() to determine whether a tc has oversized dropping enabled or not. One is to keep a bit mask of traffic classes per port, and the other is to read back from the hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the feature is enabled). We choose reading back from registers, because struct ocelot_port is shared with drivers (ocelot, seville) that don't support either cut-through nor tc-taprio, and we don't have a felix specific extension of struct ocelot_port. Furthermore, reading registers from the Felix hardware is quite cheap, since they are memory-mapped. Fixes: 55a515b1f5a9 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-02 22:43:20 +0300