summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-10-07bonding: add Speed/Duplex information to /proc/net/bonding/bondKrzysztof Oledzki1-0/+2
Effect: Slave Interface: eth5 MII Status: up Speed: 10000 Mbps Duplex: full Link Failure Count: 0 Permanent HW addr: XX:XX:XX:XX:XX:XX Slave queue ID: 0 Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07neigh: RCU conversion of struct neighbourEric Dumazet2-54/+88
This is the second step for neighbour RCU conversion. (first was commit d6bf7817 : RCU conversion of neigh hash table) neigh_lookup() becomes lockless, but still take a reference on found neighbour. (no more read_lock()/read_unlock() on tbl->lock) struct neighbour gets an additional rcu_head field and is freed after an RCU grace period. Future work would need to eventually not take a reference on neighbour for temporary dst (DST_NOCACHE), but this would need dst->_neighbour to use a noref bit like we did for skb->_dst. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bonding: reread information about speed and duplex when interface goes upKrzysztof Piotr Oledzki1-0/+2
When an interface was enslaved when it was down, bonding thinks it has speed -1 even after it goes up. This leads into selecting a wrong active interface in active/backup mode on mixed 10G/1G or 1G/100M environment. before: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. after: bonding: bond0: link status definitely up for interface eth5, 10000 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bonding: print information about speed and duplex seen by the driverKrzysztof Piotr Oledzki1-2/+3
before: bonding: bond0: link status definitely up for interface eth5 bonding: bond0: link status definitely up for interface eth0 after: bonding: bond0: link status definitely up for interface eth5, 100 Mbps full duplex. bonding: bond0: link status definitely up for interface eth0, 100 Mbps full duplex. Signed-off-by: Krzysztof Piotr Oledzki <ole@ans.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: update version to 1.60.00-1Dmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: properly initialize FW statsDmitry Kravkov1-0/+13
Client statistics need to be initialized to -1 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: code beautifyDmitry Kravkov7-233/+318
This patch does not include any functional changes. The changes are: empty lines, indentation and comments. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x, cnic: Fix SPQ return creditDmitry Kravkov4-47/+91
Return proper L2 and L5 SPQ (slow path queue) credits. Previously, all SPQ events were counted as L5 types. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: move msix table initialization to probe()Dmitry Kravkov4-134/+228
Decide which interrupt mode to use (MSI-X, MSI, INTa) only once in probe() and initialize appropriate structures. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: use L1_CACHE_BYTES instead of magic numberDmitry Kravkov1-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: use proper constants for dma_unmap* callsDmitry Kravkov2-2/+2
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: remove unused fields in main driver structureDmitry Kravkov1-7/+0
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: remove unused parameter in reuse_rx_skb()Dmitry Kravkov2-3/+3
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: Add 57712 supportDmitry Kravkov14-790/+3428
57712 HW supported with same set of features as for 57710/57711 Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: change type of spq_left to atomicDmitry Kravkov3-13/+11
The field is now accessed from different contexts. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: rename MF related fieldsDmitry Kravkov5-47/+47
MF (multi-function) mode supported not only by 57711E (E1H) devices, but also by coming 57712E, then we use more generic names. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: remove old FW filesDmitry Kravkov2-23040/+0
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x, cnic, bnx2i: use new FW/HSIDmitry Kravkov19-3222/+4764
This is the new FW HSI blob and the relevant definitions without logic changes. It also included code adaptation for new HSI. New features are not enabled. New FW/HSI includes: - Support for 57712 HW - Future support for VF (not used) - Improvements in FW interrupts scheme - FW FCoE hooks (stubs for future usage) Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: add 6.0.34 fw filesDmitry Kravkov3-0/+38096
New firmware files for all bnx2x devices Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07bnx2x: create folder for bnx2x firmware filesDmitry Kravkov5-5/+6
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07cnic: Fine-tune ring init code.Michael Chan2-6/+19
Initialize the rings only during cnic_uio_open() and shut them down during cnic_uio_close(). Check for the new bit CNIC_LCL_FL_RINGS_INITED before checking for ring interrupt. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07cnic: Use pfid for internal memory offsets.Michael Chan2-70/+75
The pfid (physical function ID) is the same as PCI function on production devices. The pfid for future devices will be different and will be used for internal memory offsets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07cnic: Pass cp pointer to BNX2X_HW_CID.Michael Chan2-11/+11
Preparation work for upcoming firmware interface changes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07[PATCH net-next] tg3: Set real_num_rx_queues for non-multiq devsMatt Carlson1-0/+1
Commit 2ddaad397c47de012dfb956b0c05540da1a0dde5 entitled "tg3: Use netif_set_real_num_{rx,tx}_queues()" added a new call to netif_set_real_num_rx_queues in tg3_enable_msix(). This call also needs to be added to the legacy path to correctly reflect the actual number of rx queues. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-07Merge branch 'vhost-net-next' of ↵David S. Miller3-12/+57
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2010-10-06bna: scope and dead code cleanupRasesh Mody11-692/+170
As suggested by Stephen Hemminger: 1) Made functions and data structures static wherever possible. 2) Removed unused code. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bna: fix interrupt handlingRasesh Mody1-21/+27
This fix handles the case when IRQ handler is called (for shared IRQs) even before the driver is ready to handle interrupts. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06fib: RCU conversion of fib_lookup()Eric Dumazet10-77/+72
fib_lookup() converted to be called in RCU protected context, no reference taken and released on a contended cache line (fib_clntref) fib_table_lookup() and fib_semantic_match() get an additional parameter. struct fib_info gets an rcu_head field, and is freed after an rcu grace period. Stress test : (Sending 160.000.000 UDP frames on same neighbour, IP route cache disabled, dual E5540 @2.53GHz, 32bit kernel, FIB_HASH) (about same results for FIB_TRIE) Before patch : real 1m31.199s user 0m13.761s sys 23m24.780s After patch: real 1m5.375s user 0m14.997s sys 15m50.115s Before patch Profile : 13044.00 15.4% __ip_route_output_key vmlinux 8438.00 10.0% dst_destroy vmlinux 5983.00 7.1% fib_semantic_match vmlinux 5410.00 6.4% fib_rules_lookup vmlinux 4803.00 5.7% neigh_lookup vmlinux 4420.00 5.2% _raw_spin_lock vmlinux 3883.00 4.6% rt_set_nexthop vmlinux 3261.00 3.9% _raw_read_lock vmlinux 2794.00 3.3% fib_table_lookup vmlinux 2374.00 2.8% neigh_resolve_output vmlinux 2153.00 2.5% dst_alloc vmlinux 1502.00 1.8% _raw_read_lock_bh vmlinux 1484.00 1.8% kmem_cache_alloc vmlinux 1407.00 1.7% eth_header vmlinux 1406.00 1.7% ipv4_dst_destroy vmlinux 1298.00 1.5% __copy_from_user_ll vmlinux 1174.00 1.4% dev_queue_xmit vmlinux 1000.00 1.2% ip_output vmlinux After patch Profile : 13712.00 15.8% dst_destroy vmlinux 8548.00 9.9% __ip_route_output_key vmlinux 7017.00 8.1% neigh_lookup vmlinux 4554.00 5.3% fib_semantic_match vmlinux 4067.00 4.7% _raw_read_lock vmlinux 3491.00 4.0% dst_alloc vmlinux 3186.00 3.7% neigh_resolve_output vmlinux 3103.00 3.6% fib_table_lookup vmlinux 2098.00 2.4% _raw_read_lock_bh vmlinux 2081.00 2.4% kmem_cache_alloc vmlinux 2013.00 2.3% _raw_spin_lock vmlinux 1763.00 2.0% __copy_from_user_ll vmlinux 1763.00 2.0% ip_output vmlinux 1761.00 2.0% ipv4_dst_destroy vmlinux 1631.00 1.9% eth_header vmlinux 1440.00 1.7% _raw_read_unlock_bh vmlinux Reference results, if IP route cache is enabled : real 0m29.718s user 0m10.845s sys 7m37.341s 25213.00 29.5% __ip_route_output_key vmlinux 9011.00 10.5% dst_release vmlinux 4817.00 5.6% ip_push_pending_frames vmlinux 4232.00 5.0% ip_finish_output vmlinux 3940.00 4.6% udp_sendmsg vmlinux 3730.00 4.4% __copy_from_user_ll vmlinux 3716.00 4.4% ip_route_output_flow vmlinux 2451.00 2.9% __xfrm_lookup vmlinux 2221.00 2.6% ip_append_data vmlinux 1718.00 2.0% _raw_spin_lock_bh vmlinux 1655.00 1.9% __alloc_skb vmlinux 1572.00 1.8% sock_wfree vmlinux 1345.00 1.6% kfree vmlinux Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bonding: add retransmit membership reports tunableFlavio Leitner5-0/+72
Allow sysadmins to configure the number of multicast membership report sent on a link failure event. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bonding: fix to rejoin multicast groups immediatelyFlavio Leitner1-8/+8
The IGMP specs states that if the system receives a membership report, it shouldn't send another for the next minute. However, if a link failure happens right after that, the backup slave and the switch connected to this slave will not know about the multicast and the traffic will hang for about a minute. This patch fixes it to rejoin multicast groups immediately after a failover restoring the multicast traffic. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06bonding: rejoin multicast groups on VLANsFlavio Leitner2-11/+50
During a failover, the IGMP membership is sent to update the switch restoring the traffic, but it misses groups added to VLAN devices running on top of bonding devices. This patch changes it to iterate over all VLAN devices on top of it sending IGMP memberships too. Signed-off-by: Flavio Leitner <fleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06ehea: converting msleeps to waitqueue on check_sqs() functionBreno Leitao2-7/+12
Removing the msleep() call in check_sqs() function, and replacing by a wait queue. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06ehea: using wait queues instead of msleep on ehea_flush_sqBreno Leitao2-7/+13
This patch just remove a msleep loop and change to wait queue, making the code cleaner. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06ixgbevf: declare functions as staticEmil Tantilov3-4/+2
Following patch fixes warnings reported by `make namespacecheck` Reported by Stephen Hemminger CC: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Acked-by: Greg Rose <greg.v.rose@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06AF_UNIX: Implement SO_TIMESTAMP and SO_TIMETAMPNS on Unix socketsAlban Crequy1-0/+5
Userspace applications can already request to receive timestamps with: setsockopt(sockfd, SOL_SOCKET, SO_TIMESTAMP, ...) Although setsockopt() returns zero (success), timestamps are not added to the ancillary data. This patch fixes that on SOCK_DGRAM and SOCK_SEQPACKET Unix sockets. Signed-off-by: Alban Crequy <alban.crequy@collabora.co.uk> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06net neigh: RCU conversion of neigh hash tableEric Dumazet6-100/+170
David This is the first step for RCU conversion of neigh code. Next patches will convert hash_buckets[] and "struct neighbour" to RCU protected objects. Thanks [PATCH net-next] net neigh: RCU conversion of neigh hash table Instead of storing hash_buckets, hash_mask and hash_rnd in "struct neigh_table", a new structure is defined : struct neigh_hash_table { struct neighbour **hash_buckets; unsigned int hash_mask; __u32 hash_rnd; struct rcu_head rcu; }; And "struct neigh_table" has an RCU protected pointer to such a neigh_hash_table. This means the signature of (*hash)() function changed: We need to add a third parameter with the actual hash_rnd value, since this is not anymore a neigh_table field. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06net neigh: neigh_delete() and neigh_add() changesEric Dumazet1-22/+17
neigh_delete() and neigh_add() dont need to touch device refcount, we hold RTNL when calling them, so device cannot disappear under us. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-06net: add a core netdev->rx_dropped counterEric Dumazet11-34/+26
In various situations, a device provides a packet to our stack and we drop it before it enters protocol stack : - softnet backlog full (accounted in /proc/net/softnet_stat) - bad vlan tag (not accounted) - unknown/unregistered protocol (not accounted) We can handle a per-device counter of such dropped frames at core level, and automatically adds it to the device provided stats (rx_dropped), so that standard tools can be used (ifconfig, ip link, cat /proc/net/dev) This is a generalization of commit 8990f468a (net: rx_dropped accounting), thus reverting it. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05vhost: max s/g to match qemuJason Wang3-12/+57
Qemu supports up to UIO_MAXIOV s/g so we have to match that because guest drivers may rely on this. Allocate indirect and log arrays dynamically to avoid using too much contigious memory and make the length of hdr array to match the header length since each iovec entry has a least one byte. Test with copying large files w/ and w/o migration in both linux and windows guests. Signed-off-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-10-05ppp: Use a real SKB control block in fragmentation engine.David S. Miller1-21/+25
Do this instead of subverting fields in skb proper. The macros that could very easily match variable or function names were also just asking for trouble. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05ipv6: make __ipv6_isatap_ifid staticstephen hemminger2-4/+1
Another exported symbol only used in one file Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05fib: fib_rules_cleanup can be staticstephen hemminger2-3/+1
fib_rules_cleanup_ups is only defined and used in one place. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05fib: cleanupsEric Dumazet3-182/+206
Code style cleanups before upcoming functional changes. C99 initializer for fib_props array. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05wimax: make functions localstephen hemminger6-23/+11
Make wimax variables and functions local if possible. Compile tested only. This also removes a couple of unused EXPORT_SYMBOL. If this breaks some out of tree code, please fix that by putting the code in the kernel tree. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05qlcnic: remove dead codestephen hemminger2-176/+0
This driver has several pieces of dead code (found by running make namespacecheck). This patch removes them. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05caif: remove duplicated includeNicolas Kaiser1-1/+0
Remove duplicated include. Signed-off-by: Nicolas Kaiser <nikai@nikai.net> Acked-by: Sjur Braendeland <sjur.brandeland@stericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05don't let BCM63XX_PHY depend on non-existant symbolUwe Kleine-König1-1/+0
The kernel doesn't have a symbol called BCM63XX. There is a symbol BCM63XX_ENET (introduced in 9b1fc55a0500, 6 weeks after 09bb9aa0ed that introduced BCM63XX_PHY), but the driver compiles without that, too. Cc: Maxime Bizon <mbizon@freebox.fr> Cc: Florian Fainelli <florian@openwrt.org> Cc: David S. Miller <davem@davemloft.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05net/phy: fix many "defined but unused" warningsUwe Kleine-König15-15/+15
MODULE_DEVICE_TABLE only expands to something if it's compiled for a module. So when building-in support for the phys, the mdio_device_id tables are unused. Marking them with __maybe_unused fixes the following warnings: drivers/net/phy/bcm63xx.c:134: warning: 'bcm63xx_tbl' defined but not used drivers/net/phy/broadcom.c:933: warning: 'broadcom_tbl' defined but not used drivers/net/phy/cicada.c:162: warning: 'cicada_tbl' defined but not used drivers/net/phy/davicom.c:222: warning: 'davicom_tbl' defined but not used drivers/net/phy/et1011c.c:114: warning: 'et1011c_tbl' defined but not used drivers/net/phy/icplus.c:137: warning: 'icplus_tbl' defined but not used drivers/net/phy/lxt.c:226: warning: 'lxt_tbl' defined but not used drivers/net/phy/marvell.c:724: warning: 'marvell_tbl' defined but not used drivers/net/phy/micrel.c:234: warning: 'micrel_tbl' defined but not used drivers/net/phy/national.c:154: warning: 'ns_tbl' defined but not used drivers/net/phy/qsemi.c:141: warning: 'qs6612_tbl' defined but not used drivers/net/phy/realtek.c:82: warning: 'realtek_tbl' defined but not used drivers/net/phy/smsc.c:257: warning: 'smsc_tbl' defined but not used drivers/net/phy/ste10Xp.c:135: warning: 'ste10Xp_tbl' defined but not used drivers/net/phy/vitesse.c:195: warning: 'vitesse_tbl' defined but not used Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05net: relax rtnl_dereference()David S. Miller1-4/+6
rtnl_dereference() is used in contexts where RTNL is held, to fetch an RCU protected pointer. Updates to this pointer are prevented by RTNL, so we dont need smp_read_barrier_depends() and the ACCESS_ONCE() provided in rcu_dereference_check(). rtnl_dereference() is mainly a macro to document the locking invariant. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-10-05ipvs: Use frag walker helper in SCTP proto support.David S. Miller1-9/+10
Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Simon Horman <horms@verge.net.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-26 04:37:07 +0300