summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-15Linux 5.17.8v5.17.8Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220513142228.651822943@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Fenil Jain<fkjainco@gmail.com> Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: fix invalid page pointer returned with FOLL_PIN gupsPeter Xu1-1/+1
commit 7196040e19ad634293acd3eff7083149d7669031 upstream. Patch series "mm/gup: some cleanups", v5. This patch (of 5): Alex reported invalid page pointer returned with pin_user_pages_remote() from vfio after upstream commit 4b6c33b32296 ("vfio/type1: Prepare for batched pinning with struct vfio_batch"). It turns out that it's not the fault of the vfio commit; however after vfio switches to a full page buffer to store the page pointers it starts to expose the problem easier. The problem is for VM_PFNMAP vmas we should normally fail with an -EFAULT then vfio will carry on to handle the MMIO regions. However when the bug triggered, follow_page_mask() returned -EEXIST for such a page, which will jump over the current page, leaving that entry in **pages untouched. However the caller is not aware of it, hence the caller will reference the page as usual even if the pointer data can be anything. We had that -EEXIST logic since commit 1027e4436b6a ("mm: make GUP handle pfn mapping unless FOLL_GET is requested") which seems very reasonable. It could be that when we reworked GUP with FOLL_PIN we could have overlooked that special path in commit 3faa52c03f44 ("mm/gup: track FOLL_PIN pages"), even if that commit rightfully touched up follow_devmap_pud() on checking FOLL_PIN when it needs to return an -EEXIST. Attaching the Fixes to the FOLL_PIN rework commit, as it happened later than 1027e4436b6a. [jhubbard@nvidia.com: added some tags, removed a reference to an out of tree module.] Link: https://lkml.kernel.org/r/20220207062213.235127-1-jhubbard@nvidia.com Link: https://lkml.kernel.org/r/20220204020010.68930-1-jhubbard@nvidia.com Link: https://lkml.kernel.org/r/20220204020010.68930-2-jhubbard@nvidia.com Fixes: 3faa52c03f44 ("mm/gup: track FOLL_PIN pages") Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reported-by: Alex Williamson <alex.williamson@redhat.com> Debugged-by: Alex Williamson <alex.williamson@redhat.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: David Hildenbrand <david@redhat.com> Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm,migrate: fix establishing demotion targetHuang Ying1-2/+5
commit fc89213a636c3735eb3386f10a34c082271b4192 upstream. In commit ac16ec835314 ("mm: migrate: support multiple target nodes demotion"), after the first demotion target node is found, we will continue to check the next candidate obtained via find_next_best_node(). This is to find all demotion target nodes with same NUMA distance. But one side effect of find_next_best_node() is that the candidate node returned will be set in "used" parameter, even if the candidate node isn't passed in the following NUMA distance checking, the candidate node will not be used as demotion target node for the following nodes. For example, for system as follows, node distances: node 0 1 2 3 0: 10 21 17 28 1: 21 10 28 17 2: 17 28 10 28 3: 28 17 28 10 when we establish demotion target node for node 0, in the first round node 2 is added to the demotion target node set. Then in the second round, node 3 is checked and failed because distance(0, 3) > distance(0, 2). But node 3 is set in "used" nodemask too. When we establish demotion target node for node 1, there is no available node. This is wrong, node 3 should be set as the demotion target of node 1. To fix this, if the candidate node is failed to pass the distance checking, it will be cleared in "used" nodemask. So that it can be used for the following node. The bug can be reproduced and fixed with this patch on a 2 socket server machine with DRAM and PMEM. Link: https://lkml.kernel.org/r/20220128055940.1792614-1-ying.huang@intel.com Fixes: ac16ec835314 ("mm: migrate: support multiple target nodes demotion") Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Yang Shi <shy828301@gmail.com> Cc: zhongjiang-ali <zhongjiang-ali@linux.alibaba.com> Cc: Xunlei Pang <xlpang@linux.alibaba.com> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm/mlock: fix potential imbalanced rlimit ucounts adjustmentMiaohe Lin1-0/+1
commit 5c2a956c3eea173b2bc89f632507c0eeaebf6c4a upstream. user_shm_lock forgets to set allowed to 0 when get_ucounts fails. So the later user_shm_unlock might do the extra dec_rlimit_ucounts. Fix this by resetting allowed to 0. Link: https://lkml.kernel.org/r/20220310132417.41189-1-linmiaohe@huawei.com Fixes: d7c9e99aee48 ("Reimplement RLIMIT_MEMLOCK on top of ucounts") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Hugh Dickins <hughd@google.com> Cc: Herbert van den Bergh <herbert.van.den.bergh@oracle.com> Cc: Chris Mason <chris.mason@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm/hwpoison: fix error page recovered but reported "not recovered"Naoya Horiguchi1-1/+3
commit 046545a661af2beec21de7b90ca0e35f05088a81 upstream. When an uncorrected memory error is consumed there is a race between the CMCI from the memory controller reporting an uncorrected error with a UCNA signature, and the core reporting and SRAR signature machine check when the data is about to be consumed. If the CMCI wins that race, the page is marked poisoned when uc_decode_notifier() calls memory_failure() and the machine check processing code finds the page already poisoned. It calls kill_accessing_process() to make sure a SIGBUS is sent. But returns the wrong error code. Console log looks like this: mce: Uncorrected hardware memory error in user-access at 3710b3400 Memory failure: 0x3710b3: recovery action for dirty LRU page: Recovered Memory failure: 0x3710b3: already hardware poisoned Memory failure: 0x3710b3: Sending SIGBUS to einj_mem_uc:361438 due to hardware memory corruption mce: Memory error not recovered kill_accessing_process() is supposed to return -EHWPOISON to notify that SIGBUS is already set to the process and kill_me_maybe() doesn't have to send it again. But current code simply fails to do this, so fix it to make sure to work as intended. This change avoids the noise message "Memory error not recovered" and skips duplicate SIGBUSs. [tony.luck@intel.com: reword some parts of commit message] Link: https://lkml.kernel.org/r/20220113231117.1021405-1-naoya.horiguchi@linux.dev Fixes: a3f5d80ea401 ("mm,hwpoison: send SIGBUS with error virutal address") Signed-off-by: Naoya Horiguchi <naoya.horiguchi@nec.com> Reported-by: Youquan Song <youquan.song@intel.com> Cc: Tony Luck <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: userfaultfd: fix missing cache flush in mcopy_atomic_pte() and ↵Muchun Song1-0/+3
__mcopy_atomic() commit 7c25a0b89a487878b0691e6524fb5a8827322194 upstream. userfaultfd calls mcopy_atomic_pte() and __mcopy_atomic() which do not do any cache flushing for the target page. Then the target page will be mapped to the user space with a different address (user address), which might have an alias issue with the kernel address used to copy the data from the user to. Fix this by insert flush_dcache_page() after copy_from_user() succeeds. Link: https://lkml.kernel.org/r/20220210123058.79206-7-songmuchun@bytedance.com Fixes: b6ebaedb4cb1 ("userfaultfd: avoid mmap_sem read recursion in mcopy_atomic") Fixes: c1a4de99fada ("userfaultfd: mcopy_atomic|mfill_zeropage: UFFDIO_COPY|UFFDIO_ZEROPAGE preparation") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: shmem: fix missing cache flush in shmem_mfill_atomic_pte()Muchun Song1-1/+3
commit 19b482c29b6f3805f1d8e93015847b89e2f7f3b1 upstream. userfaultfd calls shmem_mfill_atomic_pte() which does not do any cache flushing for the target page. Then the target page will be mapped to the user space with a different address (user address), which might have an alias issue with the kernel address used to copy the data from the user to. Insert flush_dcache_page() in non-zero-page case. And replace clear_highpage() with clear_user_highpage() which already considers the cache maintenance. Link: https://lkml.kernel.org/r/20220210123058.79206-6-songmuchun@bytedance.com Fixes: 8d1039634206 ("userfaultfd: shmem: add shmem_mfill_zeropage_pte for userfaultfd support") Fixes: 4c27fe4c4c84 ("userfaultfd: shmem: add shmem_mcopy_atomic_pte for userfaultfd support") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: hugetlb: fix missing cache flush in hugetlb_mcopy_atomic_pte()Muchun Song1-1/+2
commit 348923665a0e50ad9fc0b3bb8127d3cb976691cc upstream. folio_copy() will copy the data from one page to the target page, then the target page will be mapped to the user space address, which might have an alias issue with the kernel address used to copy the data from the page to. There are 2 ways to fix this issue. 1) insert flush_dcache_page() after folio_copy(). 2) replace folio_copy() with copy_user_huge_page() which already considers the cache maintenance. We chose 2) way to fix the issue since architectures can optimize this situation. It is also make backports easier. Link: https://lkml.kernel.org/r/20220210123058.79206-5-songmuchun@bytedance.com Fixes: 8cc5fcbb5be8 ("mm, hugetlb: fix racy resv_huge_pages underflow on UFFDIO_COPY") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: hugetlb: fix missing cache flush in copy_huge_page_from_user()Muchun Song1-0/+2
commit e763243cc6cb1fcc720ec58cfd6e7c35ae90a479 upstream. userfaultfd calls copy_huge_page_from_user() which does not do any cache flushing for the target page. Then the target page will be mapped to the user space with a different address (user address), which might have an alias issue with the kernel address used to copy the data from the user to. Fix this issue by flushing dcache in copy_huge_page_from_user(). Link: https://lkml.kernel.org/r/20220210123058.79206-4-songmuchun@bytedance.com Fixes: fa4d75c1de13 ("userfaultfd: hugetlbfs: add copy_huge_page_from_user for hugetlb userfaultfd support") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Cc: Zi Yan <ziy@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15mm: fix missing cache flush for all tail pages of compound pageMuchun Song1-2/+5
commit 2771739a7162782c0aa6424b2e3dd874e884a15d upstream. The D-cache maintenance inside move_to_new_page() only consider one page, there is still D-cache maintenance issue for tail pages of compound page (e.g. THP or HugeTLB). THP migration is only enabled on x86_64, ARM64 and powerpc, while powerpc and arm64 need to maintain the consistency between I-Cache and D-Cache, which depends on flush_dcache_page() to maintain the consistency between I-Cache and D-Cache. But there is no issues on arm64 and powerpc since they already considers the compound page cache flushing in their icache flush function. HugeTLB migration is enabled on arm, arm64, mips, parisc, powerpc, riscv, s390 and sh, while arm has handled the compound page cache flush in flush_dcache_page(), but most others do not. In theory, the issue exists on many architectures. Fix this by not using flush_dcache_folio() since it is not backportable. Link: https://lkml.kernel.org/r/20220210123058.79206-3-songmuchun@bytedance.com Fixes: 290408d4a250 ("hugetlb: hugepage migration core") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Reviewed-by: Zi Yan <ziy@nvidia.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: David Rientjes <rientjes@google.com> Cc: Fam Zheng <fam.zheng@bytedance.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Lars Persson <lars.persson@axis.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Xiongchun Duan <duanxiongchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15udf: Avoid using stale lengthOfImpUseJan Kara1-4/+4
commit c1ad35dd0548ce947d97aaf92f7f2f9a202951cf upstream. udf_write_fi() uses lengthOfImpUse of the entry it is writing to. However this field has not yet been initialized so it either contains completely bogus value or value from last directory entry at that place. In either case this is wrong and can lead to filesystem corruption or kernel crashes. Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> CC: stable@vger.kernel.org Fixes: 979a6e28dd96 ("udf: Get rid of 0-length arrays in struct fileIdentDesc") Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definitionGleb Fotengauer-Malinovskiy1-1/+1
commit a36e07dfe6ee71e209383ea9288cd8d1617e14f9 upstream. The definition of RFKILL_IOCTL_MAX_SIZE introduced by commit 54f586a91532 ("rfkill: make new event layout opt-in") is unusable since it is based on RFKILL_IOC_EXT_SIZE which has not been defined. Fix that by replacing the undefined constant with the constant which is intended to be used in this definition. Fixes: 54f586a91532 ("rfkill: make new event layout opt-in") Cc: stable@vger.kernel.org # 5.11+ Signed-off-by: Gleb Fotengauer-Malinovskiy <glebfm@altlinux.org> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Link: https://lore.kernel.org/r/20220506172454.120319-1-glebfm@altlinux.org [add commit message provided later by Dmitry] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-15Bluetooth: Fix the creation of hdev->nameItay Iellin2-3/+6
commit 103a2f3255a95991252f8f13375c3a96a75011cd upstream. Set a size limit of 8 bytes of the written buffer to "hdev->name" including the terminating null byte, as the size of "hdev->name" is 8 bytes. If an id value which is greater than 9999 is allocated, then the "snprintf(hdev->name, sizeof(hdev->name), "hci%d", id)" function call would lead to a truncation of the id value in decimal notation. Set an explicit maximum id parameter in the id allocation function call. The id allocation function defines the maximum allocated id value as the maximum id parameter value minus one. Therefore, HCI_MAX_ID is defined as 10000. Signed-off-by: Itay Iellin <ieitayie@gmail.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12Linux 5.17.7v5.17.7Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220510130741.600270947@linuxfoundation.org Tested-by: Justin M. Forbes <jforbes@fedoraproject.org> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Fox Chen <foxhlchen@gmail.com> Tested-by: Slade Watkins <slade@sladewatkins.com> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Zan Aziz <zanaziz313@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Fenil Jain<fkjainco@gmail.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Jiri Slaby <jirislaby@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Update comment about link going down after link-upMarek Behún1-2/+6
commit 92f4ffecc4170ce29e67a1f8d51c168c3de95fb2 upstream. Update the comment about what happens when link goes down after we have checked for link-up. If a PIO request is done while link-down, we have a serious problem. Link: https://lore.kernel.org/r/20220110015018.26359-23-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Drop __maybe_unused from advk_pcie_disable_phy()Marek Behún1-1/+1
commit 0c36ab437e1d94b6628b006a1d48f05ea3b0b222 upstream. This function is now always used in driver remove method, drop the __maybe_unused attribute. Link: https://lore.kernel.org/r/20220110015018.26359-22-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Don't mask irq when mappingPali Rohár1-1/+0
commit befa71000160b39c1bf6cdfca6837bb5e9d372d7 upstream. By default, all Legacy INTx interrupts are masked, so there is no need to mask this interrupt during irq_map() callback. Link: https://lore.kernel.org/r/20220110015018.26359-21-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Remove irq_mask_ack() callback for INTx interruptsPali Rohár1-1/+0
commit b08e5b53d17be58eb2311d6790a84fe2c200ee47 upstream. Callback for irq_mask_ack() is the same as for irq_mask(). As there is no special handling for irq_ack(), there is no need to define irq_mask_ack() too. Link: https://lore.kernel.org/r/20220110015018.26359-20-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Use separate INTA interrupt for emulated root bridgePali Rohár1-2/+67
commit 815bc313686783e3a1823ec0efc332c70e6bd976 upstream. Emulated root bridge currently provides only one Legacy INTA interrupt which is used for reporting PCIe PME and ERR events and handled by kernel PCIe PME and AER drivers. Aardvark HW reports these PME and ERR events separately, so there is no need to mix real INTA interrupt and emulated INTA interrupt for PCIe PME and AER drivers. Register a new advk-RP (as in Root Port) irq chip and a new irq domain for emulated root bridge and use this new separate irq domain for providing INTA interrupt from emulated root bridge for PME and ERR events. The real INTA interrupt from real devices is now separate. A custom map_irq callback function on PCI host bridge structure is used to allocate IRQ mapping for emulated root bridge from new irq domain. Original callback of_irq_parse_and_map_pci() is used for all other devices as before. Link: https://lore.kernel.org/r/20220110015018.26359-19-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Fix support for PME requester on emulated bridgePali Rohár1-41/+50
commit 273ddd86d67694e3639e3bfe337a96d8861798b8 upstream. Enable aardvark PME interrupt unconditionally by unmasking it and read PME requester ID to emulated bridge config space immediately after receiving interrupt. PME requester ID is stored in the PCIE_MSG_LOG_REG register, which contains the last inbound message. So when new inbound message is received by HW (including non-PM), the content in PCIE_MSG_LOG_REG register is replaced by a new value. PCIe specification mandates that subsequent PMEs are kept pending until the PME Status Register bit is cleared by software by writing a 1b. Support for masking/unmasking PME interrupt on emulated bridge via PCI_EXP_RTCTL_PMEIE bit is now implemented only in emulated bridge config space, to ensure that we do not miss any aardvark PME interrupt. Reading of PCI_EXP_RTCAP and PCI_EXP_RTSTA registers is simplified as final value is now always stored into emulated bridge config space by the interrupt handler, so there is no need to implement support for these registers in read_pcie callback. Clearing of W1C bit PCI_EXP_RTSTA_PME is now also simplified as it is done by pci-bridge-emul.c code for emulated bridge config space. So there is no need to implement support for clearing this bit in write_pcie callback. Link: https://lore.kernel.org/r/20220110015018.26359-18-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Add support for PME interruptsPali Rohár1-0/+12
commit 0fc75d87454195885bd1a81fc7e6ce92572b6109 upstream. Currently enabling PCI_EXP_RTSTA_PME bit in PCI_EXP_RTCTL register does nothing. This is because PCIe PME driver expects to receive PCIe interrupt defined in PCI_EXP_FLAGS_IRQ register, but aardvark hardware does not trigger PCIe INTx/MSI interrupt for PME event, rather it triggers custom aardvark interrupt which this driver is not processing yet. Fix this issue by handling PME interrupt in advk_pcie_handle_int() and chaining it to PCIe interrupt 0 with generic_handle_domain_irq() (since aardvark sets PCI_EXP_FLAGS_IRQ to zero). With this change PCIe PME driver finally starts receiving PME interrupt. Link: https://lore.kernel.org/r/20220110015018.26359-17-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Optimize writing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME on ↵Pali Rohár1-9/+11
emulated bridge commit 7122bcb33295228c882c0aa32a04b2547beba2c3 upstream. To optimize advk_pci_bridge_emul_pcie_conf_write() code, touch PCIE_ISR0_REG and PCIE_ISR0_MASK_REG registers only when it is really needed, when processing PCI_EXP_RTCTL_PMEIE and PCI_EXP_RTSTA_PME bits. Link: https://lore.kernel.org/r/20220110015018.26359-16-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Add support for ERR interrupt on emulated bridgePali Rohár1-1/+34
commit 3ebfefa396ebee21061fd5fa36073368ed2cd467 upstream. ERR interrupt is triggered when corresponding bit is unmasked in both ISR0 and PCI_EXP_DEVCTL registers. Unmasking ERR bits in PCI_EXP_DEVCTL register is not enough. This means that currently the ERR interrupt is never triggered. Unmask ERR bits in ISR0 register at driver probe time. ERR interrupt is not triggered until ERR bits are unmasked also in PCI_EXP_DEVCTL register, which is done by AER driver. So it is safe to unconditionally unmask all ERR bits in aardvark probe. Aardvark HW sets PCI_ERR_ROOT_AER_IRQ to zero and when corresponding bits in ISR0 and PCI_EXP_DEVCTL are enabled, the HW triggers a generic interrupt on GIC. Chain this interrupt to PCIe interrupt 0 with generic_handle_domain_irq() to allow processing of ERR interrupts. Link: https://lore.kernel.org/r/20220110015018.26359-14-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Enable MSI-X supportPali Rohár1-1/+1
commit 754e449889b22fc3c34235e8836f08f51121d307 upstream. According to PCI 3.0 specification, sending both MSI and MSI-X interrupts is done by DWORD memory write operation to doorbell message address. The write operation for MSI has zero upper 16 bits and the MSI interrupt number in the lower 16 bits, while the write operation for MSI-X contains a 32-bit value from MSI-X table. Since the driver only uses interrupt numbers from range 0..31, the upper 16 bits of the DWORD memory write operation to doorbell message address are zero even for MSI-X interrupts. Thus we can enable MSI-X interrupts. Testing proves that kernel can correctly receive MSI-X interrupts from PCIe cards which supports both MSI and MSI-X interrupts. Link: https://lore.kernel.org/r/20220110015018.26359-13-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Fix setting MSI addressPali Rohár1-12/+9
commit 46ad3dc4171b5ee1d12267d70112563d5760210a upstream. MSI address for receiving MSI interrupts needs to be correctly set before enabling processing of MSI interrupts. Move code for setting PCIE_MSI_ADDR_LOW_REG and PCIE_MSI_ADDR_HIGH_REG from advk_pcie_init_msi_irq_domain() to advk_pcie_setup_hw(), before enabling PCIE_CORE_CTRL2_MSI_ENABLE. After this we can remove the now unused member msi_msg, which was used only for MSI doorbell address. MSI address can be any address which cannot be used to DMA to. So change it to the address of the main struct advk_pcie. Link: https://lore.kernel.org/r/20220110015018.26359-12-kabel@kernel.org Fixes: 8c39d710363c ("PCI: aardvark: Add Aardvark PCI host controller driver") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <maz@kernel.org> Cc: stable@vger.kernel.org # f21a8b1b6837 ("PCI: aardvark: Move to MSI handling using generic MSI support") Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Add support for masking MSI interruptsPali Rohár1-5/+49
commit e77d9c90691071769cd2b86ef097f7d07167dc3b upstream. We should not unmask MSIs at setup, but only when kernel asks for them to be unmasked. At setup, mask all MSIs, and implement IRQ chip callbacks for masking and unmasking particular MSIs. Link: https://lore.kernel.org/r/20220110015018.26359-11-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Refactor unmasking summary MSI interruptPali Rohár1-4/+6
commit 4689c0916320f112a8a33f2689d3addc3262f02c upstream. Refactor the masking of ISR0/1 Sources and unmasking of summary MSI interrupt so that it corresponds to the comments: - first mask all ISR0/1 - then unmask all MSIs - then unmask summary MSI interrupt Link: https://lore.kernel.org/r/20220110015018.26359-10-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Use dev_fwnode() instead of of_node_to_fwnode(dev->of_node)Marek Behún1-2/+1
commit 222af78532fa299cd9b1008e49c347b7f5a45c17 upstream. Use simple dev_fwnode(dev) instead of struct device_node *node = dev->of_node; of_node_to_fwnode(node) especially since the node variable is not used elsewhere in the function. Link: https://lore.kernel.org/r/20220110015018.26359-9-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Make msi_domain_info structure a static driver structureMarek Behún1-8/+8
commit 26bcd54e4a5cd51ec12d06fdc30e22863ed4c422 upstream. Make Aardvark's msi_domain_info structure into a private driver structure. Domain info is same for every potential instatination of a controller. Link: https://lore.kernel.org/r/20220110015018.26359-8-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Make MSI irq_chip structures static driver structuresMarek Behún1-14/+12
commit c3cb8e51839adc0aaef478c47665443d02f5aa07 upstream. In [1] it was agreed that we should use struct irq_chip as a global static struct in the driver. Even though the structure currently contains a dynamic member (parent_device), In [2] the plans to kill it and make the structure completely static were set out. Convert Aardvark's priv->msi_bottom_irq_chip and priv->msi_irq_chip to static driver structure. [1] https://lore.kernel.org/linux-pci/877dbcvngf.wl-maz@kernel.org/ [2] https://lore.kernel.org/linux-pci/874k6gvkhz.wl-maz@kernel.org/ Link: https://lore.kernel.org/r/20220110015018.26359-7-kabel@kernel.org Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Check return value of generic_handle_domain_irq() when ↵Pali Rohár1-1/+3
processing INTx IRQ commit 51f96e287c6f003d3bb29672811c757c5fbf0028 upstream. It is possible that we receive spurious INTx interrupt. Check for the return value of generic_handle_domain_irq() when processing INTx IRQ. Link: https://lore.kernel.org/r/20220110015018.26359-6-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Rewrite IRQ code to chained IRQ handlerPali Rohár1-22/+26
commit 1571d67dc190e50c6c56e8f88cdc39f7cc53166e upstream. Rewrite the code to use irq_set_chained_handler_and_data() handler with chained_irq_enter() and chained_irq_exit() processing instead of using devm_request_irq(). advk_pcie_irq_handler() reads IRQ status bits and calls other functions based on which bits are set. These functions then read its own IRQ status bits and calls other aardvark functions based on these bits. Finally generic_handle_domain_irq() with translated linux IRQ numbers are called. Link: https://lore.kernel.org/r/20220110015018.26359-5-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12PCI: aardvark: Replace custom PCIE_CORE_INT_* macros with PCI_INTERRUPT_*Pali Rohár1-5/+1
commit 1d86abf1f89672a70f2ab65f6000299feb1f1781 upstream. Header file linux/pci.h defines enum pci_interrupt_pin with corresponding PCI_INTERRUPT_* values. Link: https://lore.kernel.org/r/20220110015018.26359-2-kabel@kernel.org Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Reviewed-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Marek Behún <kabel@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12mmc: rtsx: add 74 Clocks in power on flowRicky WU1-10/+19
commit 1f311c94aabdb419c28e3147bcc8ab89269f1a7e upstream. SD spec definition: "Host provides at least 74 Clocks before issuing first command" After 1ms for the voltage stable then start issuing the Clock signals if POWER STATE is MMC_POWER_OFF to MMC_POWER_UP to issue Clock signal to card MMC_POWER_UP to MMC_POWER_ON to stop issuing signal to card Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/1badf10aba764191a1a752edcbf90389@realtek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: Christian Löhle <CLoehle@hyperstone.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-05-12selftest/vm: verify remap destination address in mremap_testSidhartha Kumar1-0/+24
[ Upstream commit 18d609daa546c919fd36b62a7b510c18de4b4af8 ] Because mremap does not have a MAP_FIXED_NOREPLACE flag, it can destroy existing mappings. This causes a segfault when regions such as text are remapped and the permissions are changed. Verify the requested mremap destination address does not overlap any existing mappings by using mmap's MAP_FIXED_NOREPLACE flag. Keep incrementing the destination address until a valid mapping is found or fail the current test once the max address is reached. Link: https://lkml.kernel.org/r/20220420215721.4868-2-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12selftest/vm: verify mmap addr in mremap_testSidhartha Kumar1-0/+29
[ Upstream commit 9c85a9bae267f6b5e5e374d0d023bbbe9db096d3 ] Avoid calling mmap with requested addresses that are less than the system's mmap_min_addr. When run as root, mmap returns EACCES when trying to map addresses < mmap_min_addr. This is not one of the error codes for the condition to retry the mmap in the test. Rather than arbitrarily retrying on EACCES, don't attempt an mmap until addr > vm.mmap_min_addr. Add a munmap call after an alignment check as the mappings are retained after the retry and can reach the vm.max_map_count sysctl. Link: https://lkml.kernel.org/r/20220420215721.4868-1-sidhartha.kumar@oracle.com Signed-off-by: Sidhartha Kumar <sidhartha.kumar@oracle.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12KVM: LAPIC: Enable timer posted-interrupt only when mwait/hlt is advertisedWanpeng Li1-1/+2
[ Upstream commit 1714a4eb6fb0cb79f182873cd011a8ed60ac65e8 ] As commit 0c5f81dad46 ("KVM: LAPIC: Inject timer interrupt via posted interrupt") mentioned that the host admin should well tune the guest setup, so that vCPUs are placed on isolated pCPUs, and with several pCPUs surplus for *busy* housekeeping. In this setup, it is preferrable to disable mwait/hlt/pause vmexits to keep the vCPUs in non-root mode. However, if only some guests isolated and others not, they would not have any benefit from posted timer interrupts, and at the same time lose VMX preemption timer fast paths because kvm_can_post_timer_interrupt() returns true and therefore forces kvm_can_use_hv_timer() to false. By guaranteeing that posted-interrupt timer is only used if MWAIT or HLT are done without vmexit, KVM can make a better choice and use the VMX preemption timer and the corresponding fast paths. Reported-by: Aili Yao <yaoaili@kingsoft.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Cc: Aili Yao <yaoaili@kingsoft.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1643112538-36743-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12KVM: x86/mmu: avoid NULL-pointer dereference on page freeing bugsPaolo Bonzini1-0/+2
[ Upstream commit 9191b8f0745e63edf519e4a54a4aaae1d3d46fbd ] WARN and bail if KVM attempts to free a root that isn't backed by a shadow page. KVM allocates a bare page for "special" roots, e.g. when using PAE paging or shadowing 2/3/4-level page tables with 4/5-level, and so root_hpa will be valid but won't be backed by a shadow page. It's all too easy to blindly call mmu_free_root_page() on root_hpa, be nice and WARN instead of crashing KVM and possibly the kernel. Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12KVM: x86: Do not change ICR on write to APIC_SELF_IPIPaolo Bonzini1-4/+3
[ Upstream commit d22a81b304a27fca6124174a8e842e826c193466 ] Emulating writes to SELF_IPI with a write to ICR has an unwanted side effect: the value of ICR in vAPIC page gets changed. The lists SELF_IPI as write-only, with no associated MMIO offset, so any write should have no visible side effect in the vAPIC page. Reported-by: Chao Gao <chao.gao@intel.com> Reviewed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resumeWanpeng Li1-0/+13
[ Upstream commit 0361bdfddca20c8855ea3bdbbbc9c999912b10ff ] MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to host-side polling after suspend/resume. Non-bootstrap CPUs are restored correctly by the haltpoll driver because they are hot-unplugged during suspend and hot-plugged during resume; however, the BSP is not hotpluggable and remains in host-sde polling mode after the guest resume. The makes the guest pay for the cost of vmexits every time the guest enters idle. Fix it by recording BSP's haltpoll state and resuming it during guest resume. Cc: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Message-Id: <1650267752-46796-1-git-send-email-wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12KVM: selftests: Silence compiler warning in the kvm_page_table_testThomas Huth1-1/+1
[ Upstream commit 266a19a0bc4fbfab4d981a47640ca98972a01865 ] When compiling kvm_page_table_test.c, I get this compiler warning with gcc 11.2: kvm_page_table_test.c: In function 'pre_init_before_test': ../../../../tools/include/linux/kernel.h:44:24: warning: comparison of distinct pointer types lacks a cast 44 | (void) (&_max1 == &_max2); \ | ^~ kvm_page_table_test.c:281:21: note: in expansion of macro 'max' 281 | alignment = max(0x100000, alignment); | ^~~ Fix it by adjusting the type of the absolute value. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20220414103031.565037-1-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12kvm: selftests: do not use bitfields larger than 32-bits for PTEsPaolo Bonzini2-115/+92
[ Upstream commit f18b4aebe107d092e384b1ae680b1e1de7a0196d ] Red Hat's QE team reported test failure on access_tracking_perf_test: Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory offset: 0x3fffbffff000 Populating memory : 0.684014577s Writing to populated memory : 0.006230175s Reading from populated memory : 0.004557805s ==== Test Assertion Failure ==== lib/kvm_util.c:1411: false pid=125806 tid=125809 errno=4 - Interrupted system call 1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411 2 (inlined by) addr_gpa2hva at kvm_util.c:1405 3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98 4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152 5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232 6 0x00007fefe9ff81ce: ?? ??:0 7 0x00007fefe9c64d82: ?? ??:0 No vm physical memory at 0xffbffff000 I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits PA. It turns out that the address translation for clearing idle page tracking returned a wrong result; addr_gva2gpa()'s last step, which is based on "pte[index[0]].pfn", did the calculation with 40 bits length and the high 12 bits got truncated. In above case the GPA address to be returned should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into 0xffbffff000 and the subsequent gpa2hva lookup failed. The width of operations on bit fields greater than 32-bit is implementation defined, and differs between GCC (which uses the bitfield precision) and clang (which uses 64-bit arithmetic), so this is a potential minefield. Remove the bit fields and using manual masking instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036 Reported-by: Nana Liu <nanliu@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Tested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12KVM: VMX: Exit to userspace if vCPU has injected exception and invalid stateSean Christopherson1-1/+1
[ Upstream commit 053d2290c0307e3642e75e0185ddadf084dc36c1 ] Exit to userspace with an emulation error if KVM encounters an injected exception with invalid guest state, in addition to the existing check of bailing if there's a pending exception (KVM doesn't support emulating exceptions except when emulating real mode via vm86). In theory, KVM should never get to such a situation as KVM is supposed to exit to userspace before injecting an exception with invalid guest state. But in practice, userspace can intervene and manually inject an exception and/or stuff registers to force invalid guest state while a previously injected exception is awaiting reinjection. Fixes: fc4fad79fc3d ("KVM: VMX: Reject KVM_RUN if emulation is required with pending exception") Reported-by: syzbot+cfafed3bb76d3e37581b@syzkaller.appspotmail.com Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20220502221850.131873-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12KVM: SEV: Mark nested locking of vcpu->lockPeter Gonda1-4/+38
[ Upstream commit 0c2c7c069285374fc8feacddc0498f8ab7627117 ] svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all source and target vcpu->locks. Unfortunately there is an 8 subclass limit, so a new subclass cannot be used for each vCPU. Instead maintain ownership of the first vcpu's mutex.dep_map using a role specific subclass: source vs target. Release the other vcpu's mutex.dep_maps. Fixes: b56639318bb2b ("KVM: SEV: Add support for SEV intra host migration") Reported-by: John Sperbeck<jsperbeck@google.com> Suggested-by: David Rientjes <rientjes@google.com> Suggested-by: Sean Christopherson <seanjc@google.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Hillf Danton <hdanton@sina.com> Cc: kvm@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Peter Gonda <pgonda@google.com> Message-Id: <20220502165807.529624-1-pgonda@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12iommu/dart: Add missing module owner to ops structureHector Martin1-0/+1
[ Upstream commit 2ac2fab52917ae82cbca97cf6e5d2993530257ed ] This is required to make loading this as a module work. Signed-off-by: Hector Martin <marcan@marcan.st> Fixes: 46d1fb072e76 ("iommu/dart: Add DART iommu driver") Reviewed-by: Sven Peter <sven@svenpeter.dev> Link: https://lore.kernel.org/r/20220502092238.30486-1-marcan@marcan.st Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12fbdev: Make fb_release() return -ENODEV if fbdev was unregisteredJavier Martinez Canillas1-1/+4
[ Upstream commit aafa025c76dcc7d1a8c8f0bdefcbe4eb480b2f6a ] A reference to the framebuffer device struct fb_info is stored in the file private data, but this reference could no longer be valid and must not be accessed directly. Instead, the file_fb_info() accessor function must be used since it does sanity checking to make sure that the fb_info is valid. This can happen for example if the registered framebuffer device is for a driver that just uses a framebuffer provided by the system firmware. In that case, the fbdev core would unregister the framebuffer device when a real video driver is probed and ask to remove conflicting framebuffers. The bug has been present for a long time but commit 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal") unmasked it since the fbdev core started unregistering the framebuffers' devices associated. Fixes: 27599aacbaef ("fbdev: Hot-unplug firmware fb devices on forced removal") Reported-by: Maxime Ripard <maxime@cerno.tech> Reported-by: Junxiao Chang <junxiao.chang@intel.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20220502135014.377945-1-javierm@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMUSandipan Das1-0/+5
[ Upstream commit 5a1bde46f98b893cda6122b00e94c0c40a6ead3c ] On some x86 processors, CPUID leaf 0xA provides information on Architectural Performance Monitoring features. It advertises a PMU version which Qemu uses to determine the availability of additional MSRs to manage the PMCs. Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for the same, the kernel constructs return values based on the x86_pmu_capability irrespective of the vendor. This leaf and the additional MSRs are not supported on AMD and Hygon processors. If AMD PerfMonV2 is detected, the PMU version is set to 2 and guest startup breaks because of an attempt to access a non-existent MSR. Return zeros to avoid this. Fixes: a6c06ed1a60a ("KVM: Expose the architectural performance monitoring CPUID leaf") Reported-by: Vasant Hegde <vasant.hegde@amd.com> Signed-off-by: Sandipan Das <sandipan.das@amd.com> Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12net: rds: acquire refcount on TCP socketsTetsuo Handa1-0/+8
[ Upstream commit 3a58f13a881ed351198ffab4cf9953cf19d2ab3a ] syzbot is reporting use-after-free read in tcp_retransmit_timer() [1], for TCP socket used by RDS is accessing sock_net() without acquiring a refcount on net namespace. Since TCP's retransmission can happen after a process which created net namespace terminated, we need to explicitly acquire a refcount. Link: https://syzkaller.appspot.com/bug?extid=694120e1002c117747ed [1] Reported-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com> Fixes: 26abe14379f8e2fa ("net: Modify sk_alloc to not reference count the netns of kernel sockets.") Fixes: 8a68173691f03661 ("net: sk_clone_lock() should only do get_net() if the parent is not a kernel socket") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Tested-by: syzbot <syzbot+694120e1002c117747ed@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/a5fb1fc4-2284-3359-f6a0-e4e390239d7b@I-love.SAKURA.ne.jp Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12gpio: mvebu: drop pwm base assignmentBaruch Siach1-7/+0
[ Upstream commit e5f6e5d554ac274f9c8ba60078103d0425b93c19 ] pwmchip_add() unconditionally assigns the base ID dynamically. Commit f9a8ee8c8bcd1 ("pwm: Always allocate PWM chip base ID dynamically") dropped all base assignment from drivers under drivers/pwm/. It missed this driver. Fix that. Fixes: f9a8ee8c8bcd1 ("pwm: Always allocate PWM chip base ID dynamically") Signed-off-by: Baruch Siach <baruch@tkos.co.il> Reviewed-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-05-12parisc: Mark cr16 clock unstable on all SMP machinesHelge Deller1-23/+4
commit 340233dcc0160aafcce46ca893d1679f16acf409 upstream. The cr16 interval timers are not synchronized across CPUs, even with just one dual-core CPU. This becomes visible if the machines have a longer uptime. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-09-05 07:43:43 +0300