summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-10tcp: mark tcp_congestion_ops read_mostlyStephen Hemminger12-12/+12
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10ipv4: Optimize flow initialization in fib_validate_source().David S. Miller1-7/+9
Like in commit 44713b67db10c774f14280c129b0d5fd13c70cf2 ("ipv4: Optimize flow initialization in output route lookup." we can optimize the on-stack flow setup to only initialize the members which are actually used. Otherwise we bzero the entire structure, then initialize explicitly the first half of it. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10ipv4: Optimize flow initialization in input route lookup.David S. Miller1-6/+8
Like in commit 44713b67db10c774f14280c129b0d5fd13c70cf2 ("ipv4: Optimize flow initialization in output route lookup." we can optimize the on-stack flow setup to only initialize the members which are actually used. Otherwise we bzero the entire structure, then initialize explicitly the first half of it. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10tcp: ioctl type SIOCOUTQNSD returns amount of data not sentMario Schuknecht2-1/+12
In contrast to SIOCOUTQ which returns the amount of data sent but not yet acknowledged plus data not yet sent this patch only returns the data not sent. For various methods of live streaming bitrate control it may be helpful to know how much data are in the tcp outqueue are not sent yet. Signed-off-by: Mario Schuknecht <m.schuknecht@dresearch.de> Signed-off-by: Steffen Sledz <sledz@dresearch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10ipv4: Lookup multicast routes by rtable using helper.David S. Miller1-42/+28
Create a common helper for this operation, since we do it identically in three spots. Suggested by Eric Dumazet. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-10bonding: move procfs code into bond_procfs.cAmerigo Wang4-300/+306
V2: Move #ifdef CONFIG_PROC_FS into bonding.h, as suggested by David. bond_main.c is bloating, separate the procfs code out, move them to bond_procfs.c Signed-off-by: WANG Cong <amwang@redhat.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: kill the ST-Ericsson pipe controller KconfigRémi Denis-Courmont4-52/+0
This is now a run-time choice so that a single kernel can support both old and new generation ISI modems. Support for manually enabling the pipe flow is removed as it did not work properly, does not fit well with the socket API, and I am not aware of any use at the moment. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: support active connection without pipe controller on modemRémi Denis-Courmont3-162/+165
This provides support for newer ISI modems with no need for the earlier experimental compile-time alternative choice. With this, we can now use the same kernel and userspace with both types of modems. This also avoids confusing two different and incompatible state machines, actively connected vs accepted sockets, and adds connection response error handling (processing "SYN/RST" of sorts). Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: provide pipe socket option to retrieve the pipe identifierRémi Denis-Courmont3-12/+12
User-space sometimes needs this information. In particular, the GPRS context or the AT commands pipe setups may use the pipe handle as a reference. This removes the settable pipe handle with CONFIG_PHONET_PIPECTRLR. It did not handle error cases correctly. Furthermore, the kernel *could* implement a smart scheme for allocating handles (if ever needed), but userspace really cannot. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: allocate sock from accept syscall rather than soft IRQRémi Denis-Courmont3-174/+121
This moves most of the accept logic to process context like other socket stacks do. Then we can use a few more common socket helpers and simplify a bit. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: factor common code to send control messagesRémi Denis-Courmont1-152/+73
With the addition of the pipe controller, there is now quite a bit of repetitive code for small signaling messages. Lets factor it. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: correct pipe backlog callback return valuesRémi Denis-Courmont1-14/+11
In some cases, the Phonet pipe backlog callbacks returned negative errno instead of NET_RX_* values. In other cases, NET_RX_DROP was returned for invalid packets, even though it seems only intended for buffering problems (not for deliberately discarded packets). Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: return an error when packet TX failsRémi Denis-Courmont1-5/+3
Phonet assumes that packets are never dropped. We try our best to avoid this situation. But lets return ENOBUFS if queueing to the network device fails so that the caller knows things went wrong. Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09Phonet: fix NULL dereference on TX path with implicit sourceRémi Denis-Courmont1-3/+2
The previous Phonet patch series introduced per-socket implicit destination (i.e. connect()). In that case, the destination socket address is NULL in the transmit function. However commit a8059512b120362b15424f152b2548fe8b11bd0c ("Phonet: implement per-socket destination/peer address") is incomplete and would trigger a NULL dereference. (Fortunately, the code is not in released kernel, and in fact currently not reachable.) Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09inetpeer: Don't disable BH for initial fast RCU lookup.David S. Miller1-9/+9
If modifications on other cpus are ok, then modifications to the tree during lookup done by the local cpu are ok too. Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09ixgbe: fix compile failure in ixgbe_init_mbx_params_pfAndy Gospodarek1-1/+1
This commit: commit d7c8a29fc8bd20ba45ec2f52577ed04a988a9500 Author: Emil Tantilov <emil.s.tantilov@intel.com> Date: Thu Mar 3 09:25:02 2011 +0000 ixgbe: improve logic in ixgbe_init_mbx_params_pf incorrectly added a line that accessed mbx->udelay. I'm sure the intent was mbx->usec_delay. This patch fixes the compilation error. Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-09dsa/mv88e6060: support nonzero mii base addressPeter Korsgaard1-3/+4
The mv88e6060 uses either the lower 16 or upper 16 mii addresses, depending on the value of the EE_CLK/ADDR4 pin. Support both configurations by using the sw_addr setting as base address. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08Merge branch 'for-davem' of ↵David S. Miller3-10/+16
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-03-08Merge branch 'master' of ↵David S. Miller21-320/+608
master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next-2.6
2011-03-08ipv4: Fix scope value used in route src-address caching.David S. Miller2-2/+4
We have to use cfg->fc_scope not the final nh_scope value. Reported-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08ipv4: Cache source address in nexthop entries.David S. Miller3-9/+31
When doing output route lookups, we have to select the source address if the user has not specified an explicit one. First, if the route has an explicit preferred source address specified, then we use that. Otherwise we search the route's outgoing interface for a suitable address. This search can be precomputed and cached at route insertion time. The only missing part is that we have to refresh this precomputed value any time addresses are added or removed from the interface, and this is accomplished by fib_update_nh_saddrs(). Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08ixgbe: fix setting and reporting of advertised speedsEmil Tantilov1-21/+20
Add the ability to set 100/F on x540. Fix reporting of advertised modes by adding check for phy.autoneg_advertised Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: fix spelling errorsEmil Tantilov1-2/+2
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: improve logic in ixgbe_init_mbx_params_pfEmil Tantilov1-15/+12
Use if/then instead of an all-inclusive case statement. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: add function descriptionEmil Tantilov1-3/+6
Add description for ixgbe_init_eeprom_params_X540 and whitespace fix. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: Enable flow control pause parameter auto-negotiation supportEmil Tantilov6-199/+281
This patch enables flow control pause parameters auto-negotiation support to 82599 based 10G Base-T, backplane devices and multi-speed fiber optics modules at 1G speed Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: Add x540 statistic counter definitionsEmil Tantilov2-0/+14
Add defines to accumulate and display x540 PHY statistic counters on transmit/receive. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: clear correct counters for flow control on 82599Emil Tantilov2-7/+29
The 82599 was not correctly having some of it's counters cleared for flow control. This change corrects that. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: cleanup PHY initEmil Tantilov3-59/+114
This change cleans up several situations in which we were either stepping over possible errors, or calling initialization routines multiple times. Also includes whitespace fixes where applicable. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: add support to FCoE DDP in target modeYi Zou4-12/+81
Add support to the ndo_fcoe_ddp_target() to allow the Intel 82599 device to also provide DDP offload capability when the upper FCoE protocol stack is operating as a target. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08vlan: add support to ndo_fcoe_ddp_target()Yi Zou1-0/+14
Add the new target ddp offload support ndo_fcoe_ddp_target(). Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08net: add ndo_fcoe_ddp_target() to support FCoE DDP in target modeYi Zou1-0/+4
The Fiber Channel over Ethernet (FCoE) Direct Data Placement (DDP) can also be used for FCoE target, where the DDP used for read I/O on an initiator can be used on an FCoE target to speed up the write I/O to the target from the initiator. The added ndo_fcoe_ddp_target() works in the similar way as the existing ndo_fcoe_ddp_setup() to allow the underlying hardware set up the DDP context accordingly when it gets called from the FCoE target implementation on top the existing Open-FCoE fcoe/libfc protocol stack so without losing the ability to provide DDP for read I/O as an initiator, it can also provide DDP offload to the write I/O coming from the initiator as a target. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Kiran Patil <kiran.patil@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08ixgbe: fix missing function pointer conversionDon Skidmore1-1/+1
In the previous commit: commit 5e655105e3e19d746f9e95c514b014c11c3d1b6a Author: Don Skidmore <donald.c.skidmore@intel.com> Date: Fri Feb 25 01:58:04 2011 +0000 ixgbe: add function pointer for semaphore function there was one release of the semaphore function call which did not get converted to a function pointer. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08igb: Add stats output for OS2BMC feature on i350 devicesCarolyn Wyborny5-1/+29
This patch adds statistics output for OS2BMC feature which is configured by eeprom on capable devices. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08e1000e: fix build issue due to undefined reference to crc32_leEmil Tantilov1-0/+1
kernel build fails with: drivers/built-in.o: In function `e1000_lv_jumbo_workaround_ich8lan': (.text+0x3e7a8): undefined reference to `crc32_le' when CONFIG_CRC32 is not set or does not match the CONFIG_E1000E selection. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Reviewed-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-03-08af_unix: remove unused struct sockaddr_un cruftHagen Paul Pfeifer1-2/+0
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08sctp: several declared/set but unused fixesHagen Paul Pfeifer6-18/+1
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08af_packet: struct socket declared/assigned but unusedHagen Paul Pfeifer1-3/+0
Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08mcast: net_device dev not usedHagen Paul Pfeifer1-6/+0
ip6_mc_source(), ip6_mc_msfilter() as well as ip6_mc_msfget() declare and assign dev but do not use the variable afterwards. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08s2io: fix uninitialized compile warningShan Wei1-1/+1
drivers/net/s2io.c:7559: warning: ‘tcp_len’ may be used uninitialized in this function Signed-off-by: Shan Wei <shanwei@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08bonding: COW before overwriting the destination MAC addressChangli Gao1-2/+6
When there is a ptype handler holding a clone of this skb, whose destination MAC addresse is overwritten, the owner of this handler may get a corrupted packet. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08bonding: remove the unused dummy functions when net poll controller isn't ↵Changli Gao1-8/+0
enabled These two functions are only used when net poll controller is enabled. Signed-off-by: Changli Gao <xiaosuo@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08Merge branch 'davem-next.r8169' of ↵David S. Miller2-103/+178
git://git.kernel.org/pub/scm/linux/kernel/git/romieu/netdev-2.6
2011-03-08net: allow handlers to be processed for orig_devJiri Pirko1-1/+2
This was there before, I forgot about this. Allows deliveries to ptype_base handlers registered for orig_dev. I presume this is still desired. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Reviewed-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08be2net: Add multicast filter capability for LancerPadmanabh Ratnakar2-2/+5
Lancer requires multicast capability flag set during IFACE_CREATE for adding multicast filters. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08be2net: Disarm CQ and EQ to disable interrupt in LancerPadmanabh Ratnakar1-5/+12
For Lancer disable interrupts in close by disarming CQs and EQs. Change the order of calls in be_close to achieve the correct result. Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08be2net: Remove TX Queue stop in closePadmanabh Ratnakar1-1/+0
Remove TX Queue stop in close Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08be2net: Change f/w command versions for LancerPadmanabh Ratnakar2-2/+8
Change f/w command versions for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08be2net: Add error recovery during load for LancerPadmanabh Ratnakar2-0/+68
Add error recovery during load for Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-08be2net: Checksum field valid only for TCP/UDPPadmanabh Ratnakar1-3/+6
L4 checksum field is valid only for TCP/UDP packets in Lancer Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: Subramanian Seetharaman <subbu.seetharaman@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-16 08:44:44 +0300