summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-04-21regulator: core.c: Fix indentation of commentShubhankar Kuranagatti1-7/+14
Shifted the closing */ of multiline comment to a new line This is done to maintain code uniformity Signed-off-by: Shubhankar Kuranagatti <shubhankarvk@gmail.com> Link: https://lore.kernel.org/r/20210420034718.t7wudu6xcfpahflv@kewl-virtual-machine Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-02Merge series "Support ROHM BD71815 PMIC" from Matti Vaittinen ↵Mark Brown1047-5415/+8183
<matti.vaittinen@fi.rohmeurope.com>: Patch series introducing support for ROHM BD71815 PMIC ROHM BD71815 is a power management IC used in some battery powered systems. It contains regulators, GPO(s), charger + coulomb counter, RTC and a clock gate. All regulators can be controlled via I2C. LDO4 can additionally be set to be enabled/disabled by a GPIO. LDO3 voltage could be selected from two voltages written into separate VSEL reisters using GPIO but this mode is not supported by driver. On top of that the PMIC has the typical HW state machine which is present also on many other ROHM PMICs. IC contains two GPOs - but one of the GPOs is marked as GND in data-sheet. Thus the driver by default only exposes one GPO. The second GPO can be enabled by special DT property. RTC is almost similar to what is on BD71828. For currently used features only the register address offset to RTC block differs. The charger driver is not included in this series. ROHM has a charger driver with some fuel-gauging logig written in but this is not included here. I am working on separating the logic from HW specific driver and supporting both BD71815 and BD71828 chargers in separate patch series. Changelog v5: Regulator: - Added regmap helper for regulator ramp-delay and taken it in use (patches 13, 14, 16 - they can be just dropped if ramp-delay helper is not a good idea. Patch 15 implements old-fashioned ramp-delay) GPIO: - styling changes to GPIO (Mostly suggested by Andy) - implemented init_valid_mask (but can't count on it yet) Changelog v4: - Sorted ROHM chip ID enum - Statcized DVS structures in regulator driver - Minor styling for regulator driver - rebased on v5.12-rc4 Changelog v3: - GPIO clean-up as suggested by Bartosz - MFD clean-up as suggested by Lee - clk-mode dt-binding handling in MFD driver corrected to reflect new property values. - Dropped already applied patches - Rebased on v5.12-rc2 Changelog v2: - Rebased on top of v5.11-rc3 - Added another "preliminary patch" which fixes HW-dvs voltage handling (patch 1) - split regulator patch to two. - changed dt-binding patch ordering. regulators: - staticized probe - removed some unnecessary defines - updated comments - split rohm-regulator patch adding SNVS and supporting simple linear mapping into two - one adding support for mapping, other adding SNVS. GPIO: - removed unnecessary headers - clarified dev/parent->dev usage - removed forgotten #define DEBUG dt-bindings: - changed patch order to meet ref-dependencies - added missing regulator nodes - changed string property for clk mode to tristated MFD: - header cleanups. CLK: - fixed commit message -- Matti Vaittinen (19): rtc: bd70528: Do not require parent data mfd: bd718x7: simplify by cleaning unnecessary device data dt_bindings: bd71828: Add clock output mode dt_bindings: regulator: Add ROHM BD71815 PMIC regulators dt_bindings: mfd: Add ROHM BD71815 PMIC mfd: Add ROHM BD71815 ID mfd: Sort ROHM chip ID list for better readability mfd: Support for ROHM BD71815 PMIC core gpio: support ROHM BD71815 GPOs regulator: helpers: Export helper voltage listing regulator: rohm-regulator: linear voltage support regulator: rohm-regulator: Support SNVS HW state. regulator: Add regmap helper for ramp-delay setting regulator: bd718x7, bd71828: Use ramp-delay helper regulator: Support ROHM BD71815 regulators regulator: bd71815: use ramp-delay helper clk: bd718x7: Add support for clk gate on ROHM BD71815 PMIC rtc: bd70528: Support RTC on ROHM BD71815 MAINTAINERS: Add ROHM BD71815AGW .../bindings/mfd/rohm,bd71815-pmic.yaml | 201 ++++++ .../bindings/mfd/rohm,bd71828-pmic.yaml | 6 + .../regulator/rohm,bd71815-regulator.yaml | 116 ++++ MAINTAINERS | 3 + drivers/clk/clk-bd718x7.c | 9 +- drivers/gpio/Kconfig | 10 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-bd71815.c | 193 ++++++ drivers/mfd/Kconfig | 15 +- drivers/mfd/rohm-bd71828.c | 486 +++++++++---- drivers/mfd/rohm-bd718x7.c | 43 +- drivers/regulator/Kconfig | 11 + drivers/regulator/Makefile | 1 + drivers/regulator/bd71815-regulator.c | 651 ++++++++++++++++++ drivers/regulator/bd71828-regulator.c | 51 +- drivers/regulator/bd718x7-regulator.c | 60 +- drivers/regulator/helpers.c | 101 ++- drivers/regulator/rohm-regulator.c | 23 +- drivers/rtc/Kconfig | 6 +- drivers/rtc/rtc-bd70528.c | 104 +-- include/linux/mfd/rohm-bd71815.h | 562 +++++++++++++++ include/linux/mfd/rohm-bd71828.h | 3 + include/linux/mfd/rohm-bd718x7.h | 13 - include/linux/mfd/rohm-generic.h | 15 +- include/linux/regulator/driver.h | 7 + 25 files changed, 2393 insertions(+), 298 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd71815-pmic.yaml create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd71815-regulator.yaml create mode 100644 drivers/gpio/gpio-bd71815.c create mode 100644 drivers/regulator/bd71815-regulator.c create mode 100644 include/linux/mfd/rohm-bd71815.h base-commit: 0d02ec6b3136c73c09e7859f0d0e4e2c4c07b49b -- 2.25.4 -- Matti Vaittinen, Linux device drivers ROHM Semiconductors, Finland SWDC Kiviharjunlenkki 1E 90220 OULU FINLAND ~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~ Simon says - in Latin please. ~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~ Thanks to Simon Glass for the translation =]
2021-04-02regulator: Add regmap helper for ramp-delay settingMatti Vaittinen2-0/+70
Quite a few regulator ICs do support setting ramp-delay by writing a value matching the delay to a ramp-delay register. Provide a simple helper for table-based delay setting. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/f101f1db564cf32cb58719c77af0b00d7236bb89.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-02regulator: helpers: Export helper voltage listingMatti Vaittinen2-8/+30
Some drivers need to translate voltage values to selectors prior regulator registration. Currently a regulator_desc based list_voltages helper is only exported for regulators using the linear_ranges. Export similar helper also for regulators using simple linear mapping. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Link: https://lore.kernel.org/r/1200ef7a50c84327ada019b85f6527b4fc9b5ce1.1617020713.git.matti.vaittinen@fi.rohmeurope.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-01regulator: Add compatibles for PM7325/PMR735Asatya priya1-0/+4
Add PM7325/PMR735A compatibles for Qualcomm SC7280 platform. Signed-off-by: satya priya <skakit@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1617192339-3760-6-git-send-email-skakit@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-01regulator: Convert RPMh regulator bindings to YAMLsatya priya2-180/+158
Convert RPMh regulator bindings from .txt to .yaml format. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/1617192339-3760-5-git-send-email-skakit@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-01regulator: qcom-rpmh: Add PM7325/PMR735A regulator supportsatya priya1-1/+52
Add support for PM7325/PMR735A regulators. This ensures that consumers are able to modify the physical state of PMIC regulators. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1617192339-3760-3-git-send-email-skakit@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-04-01regulator: qcom-rpmh: Add pmic5_ftsmps520 bucksatya priya1-0/+9
Add pmic5_ftsmps520 buck as this is required for PM7325 and PMR735A PMICs. Signed-off-by: satya priya <skakit@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1617192339-3760-2-git-send-email-skakit@codeaurora.org Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-24regulator: mt6360: remove redundant error printJian Dong1-3/+1
fixes coccicheck warning: drivers/regulator/mt6360-regulator.c:384:3-10: line 384 is redundant because platform_get_irq() already prints an error in fact it is not platform_get_irq but platform_get_irq_byname print error Signed-off-by: Jian Dong <dongjian@yulong.com> Link: https://lore.kernel.org/r/1616555474-158789-1-git-send-email-dj0227@163.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-22Linux 5.12-rc4v5.12-rc4Linus Torvalds1-1/+1
2021-03-22Merge tag 'ext4_for_linus_stable' of ↵Linus Torvalds11-72/+168
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for v5.12" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: initialize ret to suppress smatch warning ext4: stop inode update before return ext4: fix rename whiteout with fast commit ext4: fix timer use-after-free on failed mount ext4: fix potential error in ext4_do_update_inode ext4: do not try to set xattr into ea_inode if value is empty ext4: do not iput inode under running transaction in ext4_rename() ext4: find old entry again if failed to rename whiteout ext4: fix error handling in ext4_end_enable_verity() ext4: fix bh ref count on error paths fs/ext4: fix integer overflow in s_log_groups_per_flex ext4: add reclaim checks to xattr code ext4: shrink race window in ext4_should_retry_alloc()
2021-03-21Merge tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-blockLinus Torvalds3-7/+31
Pull io_uring followup fixes from Jens Axboe: - The SIGSTOP change from Eric, so we properly ignore that for PF_IO_WORKER threads. - Disallow sending signals to PF_IO_WORKER threads in general, we're not interested in having them funnel back to the io_uring owning task. - Stable fix from Stefan, ensuring we properly break links for short send/sendmsg recv/recvmsg if MSG_WAITALL is set. - Catch and loop when needing to run task_work before a PF_IO_WORKER threads goes to sleep. * tag 'io_uring-5.12-2021-03-21' of git://git.kernel.dk/linux-block: io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with MSG_WAITALL io-wq: ensure task is running before processing task_work signal: don't allow STOP on PF_IO_WORKER threads signal: don't allow sending any signals to PF_IO_WORKER threads
2021-03-21Merge tag 'staging-5.12-rc4' of ↵Linus Torvalds14-48/+75
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging and IIO driver fixes from Greg KH: "Some small staging and IIO driver fixes: - MAINTAINERS changes for the move of the staging mailing list - comedi driver fixes to get request_irq() to work correctly - counter driver fixes for reported issues with iio devices - tiny iio driver fixes for reported issues. All of these have been in linux-next with no reported problems" * tag 'staging-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vt665x: fix alignment constraints staging: comedi: cb_pcidas64: fix request_irq() warn staging: comedi: cb_pcidas: fix request_irq() warn MAINTAINERS: move the staging subsystem to lists.linux.dev MAINTAINERS: move some real subsystems off of the staging mailing list iio: gyro: mpu3050: Fix error handling in mpu3050_trigger_handler iio: hid-sensor-temperature: Fix issues of timestamp channel iio: hid-sensor-humidity: Fix alignment issue of timestamp channel counter: stm32-timer-cnt: fix ceiling miss-alignment with reload register counter: stm32-timer-cnt: fix ceiling write max value counter: stm32-timer-cnt: Report count function when SLAVE_MODE_DISABLED iio: adc: ab8500-gpadc: Fix off by 10 to 3 iio:adc:stm32-adc: Add HAS_IOMEM dependency iio: adis16400: Fix an error code in adis16400_initial_setup() iio: adc: adi-axi-adc: add proper Kconfig dependencies iio: adc: ad7949: fix wrong ADC result due to incorrect bit mask iio: hid-sensor-prox: Fix scale not correct issue iio:adc:qcom-spmi-vadc: add default scale to LR_MUX2_BAT_ID channel
2021-03-21Merge tag 'usb-5.12-rc4' of ↵Linus Torvalds11-25/+62
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and Thunderbolt driver fixes from Greg KH: "Here are some small Thunderbolt and USB driver fixes for some reported issues: - thunderbolt fixes for minor problems - typec fixes for power issues - usb-storage quirk addition - usbip bugfix - dwc3 bugfix when stopping transfers - cdnsp bugfix for isoc transfers - gadget use-after-free fix All have been in linux-next this week with no reported issues" * tag 'usb-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: typec: tcpm: Skip sink_cap query only when VDM sm is busy usb: dwc3: gadget: Prevent EP queuing while stopping transfers usb: typec: tcpm: Invoke power_supply_changed for tcpm-source-psy- usb: typec: Remove vdo[3] part of tps6598x_rx_identity_reg struct usb-storage: Add quirk to defeat Kindle's automatic unload usb: gadget: configfs: Fix KASAN use-after-free usbip: Fix incorrect double assignment to udc->ud.tcp_rx usb: cdnsp: Fixes incorrect value in ISOC TRB thunderbolt: Increase runtime PM reference count on DP tunnel discovery thunderbolt: Initialize HopID IDAs in tb_switch_alloc()
2021-03-21Merge tag 'irq-urgent-2021-03-21' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fix from Ingo Molnar: "A change to robustify force-threaded IRQ handlers to always disable interrupts, plus a DocBook fix. The force-threaded IRQ handler change has been accelerated from the normal schedule of such a change to keep the bad pattern/workaround of spin_lock_irqsave() in handlers or IRQF_NOTHREAD as a kludge from spreading" * tag 'irq-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: genirq: Disable interrupts for force threaded handlers genirq/irq_sim: Fix typos in kernel doc (fnode -> fwnode)
2021-03-21Merge tag 'perf-urgent-2021-03-21' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Boundary condition fixes for bugs unearthed by the perf fuzzer" * tag 'perf-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/intel: Fix unchecked MSR access error caused by VLBR_EVENT perf/x86/intel: Fix a crash caused by zero PEBS status
2021-03-21Merge tag 'locking-urgent-2021-03-21' of ↵Linus Torvalds4-31/+49
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Ingo Molnar: - Get static calls & modules right. Hopefully. - WW mutex fixes * tag 'locking-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: static_call: Fix static_call_update() sanity check static_call: Align static_call_is_init() patching condition static_call: Fix static_call_set_init() locking/ww_mutex: Fix acquire/release imbalance in ww_acquire_init()/ww_acquire_fini() locking/ww_mutex: Simplify use_ww_ctx & ww_ctx handling
2021-03-21Merge tag 'efi-urgent-2021-03-21' of ↵Linus Torvalds3-3/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: - another missing RT_PROP table related fix, to ensure that the efivarfs pseudo filesystem fails gracefully if variable services are unsupported - use the correct alignment for literal EFI GUIDs - fix a use after unmap issue in the memreserve code * tag 'efi-urgent-2021-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi: use 32-bit alignment for efi_guid_t literals firmware/efi: Fix a use after bug in efi_mem_reserve_persistent efivars: respect EFI_UNSUPPORTED return from firmware
2021-03-21Merge tag 'x86_urgent_for_v5.12-rc4' of ↵Linus Torvalds12-44/+52
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: "The freshest pile of shiny x86 fixes for 5.12: - Add the arch-specific mapping between physical and logical CPUs to fix devicetree-node lookups - Restore the IRQ2 ignore logic - Fix get_nr_restart_syscall() to return the correct restart syscall number. Split in a 4-patches set to avoid kABI breakage when backporting to dead kernels" * tag 'x86_urgent_for_v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic/of: Fix CPU devicetree-node lookups x86/ioapic: Ignore IRQ2 again x86: Introduce restart_block->arch_data to remove TS_COMPAT_RESTART x86: Introduce TS_COMPAT_RESTART to fix get_nr_restart_syscall() x86: Move TS_COMPAT back to asm/thread_info.h kernel, fs: Introduce and use set_restart_fn() and arch_set_restart_data()
2021-03-21Merge tag 'powerpc-5.12-4' of ↵Linus Torvalds3-10/+19
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix a possible stack corruption and subsequent DLPAR failure in the rpadlpar_io PCI hotplug driver - Two build fixes for uncommon configurations Thanks to Christophe Leroy and Tyrel Datwyler. * tag 'powerpc-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: PCI: rpadlpar: Fix potential drc_name corruption in store functions powerpc: Force inlining of cpu_has_feature() to avoid build failure powerpc/vdso32: Add missing _restgpr_31_x to fix build failure
2021-03-21io_uring: call req_set_fail_links() on short send[msg]()/recv[msg]() with ↵Stefan Metzmacher1-4/+20
MSG_WAITALL Without that it's not safe to use them in a linked combination with others. Now combinations like IORING_OP_SENDMSG followed by IORING_OP_SPLICE should be possible. We already handle short reads and writes for the following opcodes: - IORING_OP_READV - IORING_OP_READ_FIXED - IORING_OP_READ - IORING_OP_WRITEV - IORING_OP_WRITE_FIXED - IORING_OP_WRITE - IORING_OP_SPLICE - IORING_OP_TEE Now we have it for these as well: - IORING_OP_SENDMSG - IORING_OP_SEND - IORING_OP_RECVMSG - IORING_OP_RECV For IORING_OP_RECVMSG we also check for the MSG_TRUNC and MSG_CTRUNC flags in order to call req_set_fail_links(). There might be applications arround depending on the behavior that even short send[msg]()/recv[msg]() retuns continue an IOSQE_IO_LINK chain. It's very unlikely that such applications pass in MSG_WAITALL, which is only defined in 'man 2 recvmsg', but not in 'man 2 sendmsg'. It's expected that the low level sock_sendmsg() call just ignores MSG_WAITALL, as MSG_ZEROCOPY is also ignored without explicitly set SO_ZEROCOPY. We also expect the caller to know about the implicit truncation to MAX_RW_COUNT, which we don't detect. cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/c4e1a4cc0d905314f4d5dc567e65a7b09621aab3.1615908477.git.metze@samba.org Signed-off-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-21io-wq: ensure task is running before processing task_workJens Axboe1-2/+6
Mark the current task as running if we need to run task_work from the io-wq threads as part of work handling. If that is the case, then return as such so that the caller can appropriately loop back and reset if it was part of a going-to-sleep flush. Fixes: 3bfe6106693b ("io-wq: fork worker threads from original task") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-21signal: don't allow STOP on PF_IO_WORKER threadsEric W. Biederman1-1/+2
Just like we don't allow normal signals to IO threads, don't deliver a STOP to a task that has PF_IO_WORKER set. The IO threads don't take signals in general, and have no means of flushing out a stop either. Longer term, we may want to look into allowing stop of these threads, as it relates to eg process freezing. For now, this prevents a spin issue if a SIGSTOP is delivered to the parent task. Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2021-03-21signal: don't allow sending any signals to PF_IO_WORKER threadsJens Axboe1-0/+3
They don't take signals individually, and even if they share signals with the parent task, don't allow them to be delivered through the worker thread. Linux does allow this kind of behavior for regular threads, but it's really a compatability thing that we need not care about for the IO threads. Reported-by: Stefan Metzmacher <metze@samba.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-03-21ext4: initialize ret to suppress smatch warningTheodore Ts'o1-1/+1
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: stop inode update before returnPan Bian1-1/+3
The inode update should be stopped before returing the error code. Signed-off-by: Pan Bian <bianpan2016@163.com> Link: https://lore.kernel.org/r/20210117085732.93788-1-bianpan2016@163.com Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Cc: stable@kernel.org Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: fix rename whiteout with fast commitHarshad Shirwadkar3-2/+12
This patch adds rename whiteout support in fast commits. Note that the whiteout object that gets created is actually char device. Which imples, the function ext4_inode_journal_mode(struct inode *inode) would return "JOURNAL_DATA" for this inode. This has a consequence in fast commit code that it will make creation of the whiteout object a fast-commit ineligible behavior and thus will fall back to full commits. With this patch, this can be observed by running fast commits with rename whiteout and seeing the stats generated by ext4_fc_stats tracepoint as follows: ext4_fc_stats: dev 254:32 fc ineligible reasons: XATTR:0, CROSS_RENAME:0, JOURNAL_FLAG_CHANGE:0, NO_MEM:0, SWAP_BOOT:0, RESIZE:0, RENAME_DIR:0, FALLOC_RANGE:0, INODE_JOURNAL_DATA:16; num_commits:6, ineligible: 6, numblks: 3 So in short, this patch guarantees that in case of rename whiteout, we fall back to full commits. Amir mentioned that instead of creating a new whiteout object for every rename, we can create a static whiteout object with irrelevant nlink. That will make fast commits to not fall back to full commit. But until this happens, this patch will ensure correctness by falling back to full commits. Fixes: 8016e29f4362 ("ext4: fast commit recovery path") Cc: stable@kernel.org Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20210316221921.1124955-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: fix timer use-after-free on failed mountJan Kara1-1/+1
When filesystem mount fails because of corrupted filesystem we first cancel the s_err_report timer reminding fs errors every day and only then we flush s_error_work. However s_error_work may report another fs error and re-arm timer thus resulting in timer use-after-free. Fix the problem by first flushing the work and only after that canceling the s_err_report timer. Reported-by: syzbot+628472a2aac693ab0fcd@syzkaller.appspotmail.com Fixes: 2d01ddc86606 ("ext4: save error info to sb through journal if available") CC: stable@vger.kernel.org Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20210315165906.2175-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: fix potential error in ext4_do_update_inodeShijie Luo1-4/+4
If set_large_file = 1 and errors occur in ext4_handle_dirty_metadata(), the error code will be overridden, go to out_brelse to avoid this situation. Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Link: https://lore.kernel.org/r/20210312065051.36314-1-luoshijie1@huawei.com Cc: stable@kernel.org Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: do not try to set xattr into ea_inode if value is emptyzhangyi (F)1-1/+1
Syzbot report a warning that ext4 may create an empty ea_inode if set an empty extent attribute to a file on the file system which is no free blocks left. WARNING: CPU: 6 PID: 10667 at fs/ext4/xattr.c:1640 ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640 ... Call trace: ext4_xattr_set_entry+0x10f8/0x1114 fs/ext4/xattr.c:1640 ext4_xattr_block_set+0x1d0/0x1b1c fs/ext4/xattr.c:1942 ext4_xattr_set_handle+0x8a0/0xf1c fs/ext4/xattr.c:2390 ext4_xattr_set+0x120/0x1f0 fs/ext4/xattr.c:2491 ext4_xattr_trusted_set+0x48/0x5c fs/ext4/xattr_trusted.c:37 __vfs_setxattr+0x208/0x23c fs/xattr.c:177 ... Now, ext4 try to store extent attribute into an external inode if ext4_xattr_block_set() return -ENOSPC, but for the case of store an empty extent attribute, store the extent entry into the extent attribute block is enough. A simple reproduce below. fallocate test.img -l 1M mkfs.ext4 -F -b 2048 -O ea_inode test.img mount test.img /mnt dd if=/dev/zero of=/mnt/foo bs=2048 count=500 setfattr -n "user.test" /mnt/foo Reported-by: syzbot+98b881fdd8ebf45ab4ae@syzkaller.appspotmail.com Fixes: 9c6e7853c531 ("ext4: reserve space for xattr entries/names") Cc: stable@kernel.org Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210305120508.298465-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: do not iput inode under running transaction in ext4_rename()zhangyi (F)1-9/+9
In ext4_rename(), when RENAME_WHITEOUT failed to add new entry into directory, it ends up dropping new created whiteout inode under the running transaction. After commit <9b88f9fb0d2> ("ext4: Do not iput inode under running transaction"), we follow the assumptions that evict() does not get called from a transaction context but in ext4_rename() it breaks this suggestion. Although it's not a real problem, better to obey it, so this patch add inode to orphan list and stop transaction before final iput(). Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210303131703.330415-2-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21ext4: find old entry again if failed to rename whiteoutzhangyi (F)1-2/+27
If we failed to add new entry on rename whiteout, we cannot reset the old->de entry directly, because the old->de could have moved from under us during make indexed dir. So find the old entry again before reset is needed, otherwise it may corrupt the filesystem as below. /dev/sda: Entry '00000001' in ??? (12) has deleted/unused inode 15. CLEARED. /dev/sda: Unattached inode 75 /dev/sda: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY. Fixes: 6b4b8e6b4ad ("ext4: fix bug for rename with RENAME_WHITEOUT") Cc: stable@vger.kernel.org Signed-off-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/20210303131703.330415-1-yi.zhang@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
2021-03-21genirq: Disable interrupts for force threaded handlersThomas Gleixner1-0/+4
With interrupt force threading all device interrupt handlers are invoked from kernel threads. Contrary to hard interrupt context the invocation only disables bottom halfs, but not interrupts. This was an oversight back then because any code like this will have an issue: thread(irq_A) irq_handler(A) spin_lock(&foo->lock); interrupt(irq_B) irq_handler(B) spin_lock(&foo->lock); This has been triggered with networking (NAPI vs. hrtimers) and console drivers where printk() happens from an interrupt which interrupted the force threaded handler. Now people noticed and started to change the spin_lock() in the handler to spin_lock_irqsave() which affects performance or add IRQF_NOTHREAD to the interrupt request which in turn breaks RT. Fix the root cause and not the symptom and disable interrupts before invoking the force threaded handler which preserves the regular semantics and the usefulness of the interrupt force threading as a general debugging tool. For not RT this is not changing much, except that during the execution of the threaded handler interrupts are delayed until the handler returns. Vs. scheduling and softirq processing there is no difference. For RT kernels there is no issue. Fixes: 8d32a307e4fa ("genirq: Provide forced interrupt threading") Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Johan Hovold <johan@kernel.org> Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Link: https://lore.kernel.org/r/20210317143859.513307808@linutronix.de
2021-03-20Merge tag 'riscv-for-linus-5.12-rc4' of ↵Linus Torvalds19-19/+55
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "A handful of fixes for 5.12: - fix the SBI remote fence numbers for hypervisor fences, which had been transcribed in the wrong order in Linux. These fences are only used with the KVM patches applied. - fix a whole host of build warnings, these should have no functional change. - fix init_resources() to prevent an off-by-one error from causing an out-of-bounds array reference. This was manifesting during boot on vexriscv. - ensure the KASAN mappings are visible before proceeding to use them" * tag 'riscv-for-linus-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Correct SPARSEMEM configuration RISC-V: kasan: Declare kasan_shallow_populate() static riscv: Ensure page table writes are flushed when initializing KASAN vmalloc RISC-V: Fix out-of-bounds accesses in init_resources() riscv: Fix compilation error with Canaan SoC ftrace: Fix spelling mistake "disabed" -> "disabled" riscv: fix bugon.cocci warnings riscv: process: Fix no prototype for arch_dup_task_struct riscv: ftrace: Use ftrace_get_regs helper riscv: process: Fix no prototype for show_regs riscv: syscall_table: Reduce W=1 compilation warnings noise riscv: time: Fix no prototype for time_init riscv: ptrace: Fix no prototype warnings riscv: sbi: Fix comment of __sbi_set_timer_v01 riscv: irq: Fix no prototype warning riscv: traps: Fix no prototype warnings RISC-V: correct enum sbi_ext_rfence_fid
2021-03-20Merge tag '5.12-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds5-8/+26
Pull cifs fixes from Steve French: "Five cifs/smb3 fixes - three for stable, including an important ACL fix and security signature fix" * tag '5.12-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix allocation size on newly created files cifs: warn and fail if trying to use rootfs without the config option fs/cifs/: fix misspellings using codespell tool cifs: Fix preauth hash corruption cifs: update new ACE pointer after populate_new_aces.
2021-03-20Merge tag 'scsi-fixes' of ↵Linus Torvalds8-15/+20
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Eight fixes, all in drivers, all fairly minor either being fixes in error legs, memory leaks on teardown, context errors or semantic problems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Do not use GFP_KERNEL in atomic context scsi: ufs: ufs-mediatek: Correct operator & -> && scsi: sd_zbc: Update write pointer offset cache scsi: lpfc: Fix some error codes in debugfs scsi: qla2xxx: Fix broken #endif placement scsi: st: Fix a use after free in st_open() scsi: myrs: Fix a double free in myrs_cleanup() scsi: ibmvfc: Free channel_setup_buf during device tear down
2021-03-20Merge tag 'zonefs-5.12-rc4' of ↵Linus Torvalds1-14/+87
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs Pull zonefs fixes from Damien Le Moal: - fix inode write open reference count (Chao) - Fix wrong write offset for asynchronous O_APPEND writes (me) - Prevent use of sequential zone file as swap files (me) * tag 'zonefs-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: fix to update .i_wr_refcnt correctly in zonefs_open_zone() zonefs: Fix O_APPEND async write handling zonefs: prevent use of seq files as swap file
2021-03-20Merge tag 'block-5.12-2021-03-19' of git://git.kernel.dk/linux-blockLinus Torvalds8-60/+69
Pull block fixes from Jens Axboe: "Just an NVMe pull request this week: - fix tag allocation for keep alive - fix a unit mismatch for the Write Zeroes limits - various TCP transport fixes (Sagi Grimberg, Elad Grupi) - fix iosqes and iocqes validation for discovery controllers (Sagi Grimberg)" * tag 'block-5.12-2021-03-19' of git://git.kernel.dk/linux-block: nvmet-tcp: fix kmap leak when data digest in use nvmet: don't check iosqes,iocqes for discovery controllers nvme-rdma: fix possible hang when failing to set io queues nvme-tcp: fix possible hang when failing to set io queues nvme-tcp: fix misuse of __smp_processor_id with preemption enabled nvme-tcp: fix a NULL deref when receiving a 0-length r2t PDU nvme: fix Write Zeroes limitations nvme: allocate the keep alive request using BLK_MQ_REQ_NOWAIT nvme: merge nvme_keep_alive into nvme_keep_alive_work nvme-fabrics: only reserve a single tag
2021-03-20Merge tag 'io_uring-5.12-2021-03-19' of git://git.kernel.dk/linux-blockLinus Torvalds6-130/+142
Pull io_uring fixes from Jens Axboe: "Quieter week this time, which was both expected and desired. About half of the below is fixes for this release, the other half are just fixes in general. In detail: - Fix the freezing of IO threads, by making the freezer not send them fake signals. Make them freezable by default. - Like we did for personalities, move the buffer IDR to xarray. Kills some code and avoids a use-after-free on teardown. - SQPOLL cleanups and fixes (Pavel) - Fix linked timeout race (Pavel) - Fix potential completion post use-after-free (Pavel) - Cleanup and move internal structures outside of general kernel view (Stefan) - Use MSG_SIGNAL for send/recv from io_uring (Stefan)" * tag 'io_uring-5.12-2021-03-19' of git://git.kernel.dk/linux-block: io_uring: don't leak creds on SQO attach error io_uring: use typesafe pointers in io_uring_task io_uring: remove structures from include/linux/io_uring.h io_uring: imply MSG_NOSIGNAL for send[msg]()/recv[msg]() calls io_uring: fix sqpoll cancellation via task_work io_uring: add generic callback_head helpers io_uring: fix concurrent parking io_uring: halt SQO submission on ctx exit io_uring: replace sqd rw_semaphore with mutex io_uring: fix complete_post use ctx after free io_uring: fix ->flags races by linked timeouts io_uring: convert io_buffer_idr to XArray io_uring: allow IO worker threads to be frozen kernel: freezer should treat PF_IO_WORKER like PF_KTHREAD for freezing
2021-03-20x86/apic/of: Fix CPU devicetree-node lookupsJohan Hovold1-0/+5
Architectures that describe the CPU topology in devicetree and do not have an identity mapping between physical and logical CPU ids must override the default implementation of arch_match_cpu_phys_id(). Failing to do so breaks CPU devicetree-node lookups using of_get_cpu_node() and of_cpu_device_node_get() which several drivers rely on. It also causes the CPU struct devices exported through sysfs to point to the wrong devicetree nodes. On x86, CPUs are described in devicetree using their APIC ids and those do not generally coincide with the logical ids, even if CPU0 typically uses APIC id 0. Add the missing implementation of arch_match_cpu_phys_id() so that CPU-node lookups work also with SMP. Apart from fixing the broken sysfs devicetree-node links this likely does not affect current users of mainline kernels on x86. Fixes: 4e07db9c8db8 ("x86/devicetree: Use CPU description from Device Tree") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20210312092033.26317-1-johan@kernel.org
2021-03-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds18-120/+807
Pull kvm fixes from Paolo Bonzini: "Fixes for kvm on x86: - new selftests - fixes for migration with HyperV re-enlightenment enabled - fix RCU/SRCU usage - fixes for local_irq_restore misuse false positive" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: documentation/kvm: additional explanations on KVM_SET_BOOT_CPU_ID x86/kvm: Fix broken irq restoration in kvm_wait KVM: X86: Fix missing local pCPU when executing wbinvd on all dirty pCPUs KVM: x86: Protect userspace MSR filter with SRCU, and set atomically-ish selftests: kvm: add set_boot_cpu_id test selftests: kvm: add _vm_ioctl selftests: kvm: add get_msr_index_features selftests: kvm: Add basic Hyper-V clocksources tests KVM: x86: hyper-v: Don't touch TSC page values when guest opted for re-enlightenment KVM: x86: hyper-v: Track Hyper-V TSC page status KVM: x86: hyper-v: Prevent using not-yet-updated TSC page by secondary CPUs KVM: x86: hyper-v: Limit guest to writing zero to HV_X64_MSR_TSC_EMULATION_STATUS KVM: x86/mmu: Store the address space ID in the TDP iterator KVM: x86/mmu: Factor out tdp_iter_return_to_root KVM: x86/mmu: Fix RCU usage when atomically zapping SPTEs KVM: x86/mmu: Fix RCU usage in handle_removed_tdp_mmu_page
2021-03-20Merge tag 'gpio-fixes-for-v5.12-rc4' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fixes from Bartosz Golaszewski: "Two fixes for the GPIO subsystem. Both address issues in the core GPIO code: - fix the return value in error path in gpiolib_dev_init() - fix the 'gpio-line-names' property handling correctly this time" * tag 'gpio-fixes-for-v5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpiolib: Assign fwnode to parent's if no primary one provided gpiolib: Fix error return code in gpiolib_dev_init()
2021-03-19Merge tag 's390-5.12-4' of ↵Linus Torvalds6-20/+36
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 updates from Heiko Carstens: - disable preemption when accessing local per-cpu variables in the new counter set driver - fix by a factor of four increased steal time due to missing cputime_to_nsecs() conversion - fix PCI device structure leak * tag 's390-5.12-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: fix leak of PCI device structure s390/vtime: fix increased steal time accounting s390/cpumf: disable preemption when accessing per-cpu variable
2021-03-19Merge tag 'trace-v5.12-rc3' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull workqueue tracing fix from Steven Rostedt: "Fix workqueue trace event unsafe string reference After adding a verifier to test all strings printed in trace events to make sure they either point to a string on the ring buffer, or to read only core kernel memory, it triggered on a workqueue trace event. The trace event workqueue_queue_work references the allocated name of the workqueue in the output. If the workqueue is freed before the trace is read, then the trace will dereference freed memory. Update the trace event to use the __string(), __assign_str(), and __get_str() helpers to handle such cases" * tag 'trace-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: workqueue/tracing: Copy workqueue name to buffer in trace event
2021-03-19Merge tag 'pm-5.12-rc4' of ↵Linus Torvalds2-39/+25
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fixes from Rafael Wysocki: "Revert two problematic commits. Specifics: - Revert ACPI PM commit that attempted to improve reboot handling on some systems, but it caused other systems to panic() during reboot (Josef Bacik) - Revert PM-runtime commit that attempted to improve the handling of suppliers during PM-runtime suspend of a consumer device, but it introduced a race condition potentially leading to unexpected behavior (Rafael Wysocki)" * tag 'pm-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: Revert "PM: runtime: Update device status before letting suppliers suspend" Revert "PM: ACPI: reboot: Use S5 for reboot"
2021-03-19Merge tag 'iommu-fixes-v5.12-rc3' of ↵Linus Torvalds2-20/+23
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: - Three AMD IOMMU patches to fix a boot crash on AMD Stoney systems and every other AMD IOMMU system booted with 'amd_iommu=off'. This is a v5.11 regression. - A Fix for the Tegra IOMMU driver to make sure it detects all IOMMUs * tag 'iommu-fixes-v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/tegra-smmu: Make tegra_smmu_probe_device() to handle all IOMMU phandles iommu/amd: Keep track of amd_iommu_irq_remap state iommu/amd: Don't call early_amd_iommu_init() when AMD IOMMU is disabled iommu/amd: Move Stoney Ridge check to detect_ivrs()
2021-03-19Merge tag 'sound-5.12-rc4' of ↵Linus Torvalds35-292/+253
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "The majority of changes are various ASoC device/platform-specific small fixes (including a removal of stale file) while the only common change is a clk management fix in ASoC simple-card driver. The rest are the usual HD-audio quirks" * tag 'sound-5.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (44 commits) ALSA: usb-audio: Fix unintentional sign extension issue ALSA: hda/realtek: fix mute/micmute LEDs for HP 850 G8 ASoC: dt-bindings: fsl_spdif: Add compatible string for new platforms ASoC: rt711: add snd_soc_component remove callback ASoC: rt5659: Update MCLK rate in set_sysclk() ASoC: simple-card-utils: Do not handle device clock ALSA: hda/realtek: fix mute/micmute LEDs for HP 440 G8 ALSA: hda/realtek: fix mute/micmute LEDs for HP 840 G8 ALSA: hda/realtek: apply pin quirk for XiaomiNotebook Pro ALSA: hda/realtek: Apply headset-mic quirks for Xiaomi Redmibook Air ASoC: mediatek: mt8192: fix tdm out data is valid on rising edge ALSA: dice: fix null pointer dereference when node is disconnected ALSA: hda: generic: Fix the micmute led init state ASoC: qcom: lpass-cpu: Fix lpass dai ids parse spi: cadence: set cqspi to the driver_data field of struct device ASoC: SOF: intel: fix wrong poll bits in dsp power down ASoC: codecs: wcd934x: add a sanity check in set channel map ASoC: qcom: sdm845: Fix array out of range on rx slim channels ASoC: qcom: sdm845: Fix array out of bounds access ASoC: remove remnants of sirf prima/atlas audio codec ...
2021-03-19cifs: fix allocation size on newly created filesSteve French1-1/+9
Applications that create and extend and write to a file do not expect to see 0 allocation size. When file is extended, set its allocation size to a plausible value until we have a chance to query the server for it. When the file is cached this will prevent showing an impossible number of allocated blocks (like 0). This fixes e.g. xfstests 614 which does 1) create a file and set its size to 64K 2) mmap write 64K to the file 3) stat -c %b for the file (to query the number of allocated blocks) It was failing because we returned 0 blocks. Even though we would return the correct cached file size, we returned an impossible allocation size. Signed-off-by: Steve French <stfrench@microsoft.com> CC: <stable@vger.kernel.org> Reviewed-by: Aurelien Aptel <aaptel@suse.com>
2021-03-19Merge branch 'pm-core'Rafael J. Wysocki1-37/+25
* pm-core: Revert "PM: runtime: Update device status before letting suppliers suspend"
2021-03-19Revert "PM: runtime: Update device status before letting suppliers suspend"Rafael J. Wysocki1-37/+25
Revert commit 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend") that introduced a race condition into __rpm_callback() which allowed a concurrent rpm_resume() to run and resume the device prematurely after its status had been changed to RPM_SUSPENDED by __rpm_callback(). Fixes: 44cc89f76464 ("PM: runtime: Update device status before letting suppliers suspend") Link: https://lore.kernel.org/linux-pm/24dfb6fc-5d54-6ee2-9195-26428b7ecf8a@intel.com/ Reported-by: Adrian Hunter <adrian.hunter@intel.com> Cc: 4.10+ <stable@vger.kernel.org> # 4.10+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>