summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-06-23clk: stm32: Add clock driver for STM32F4[23]xxx devicesDaniel Thompson2-0/+381
The driver supports decoding and statically modelling PLL state (i.e. we inherit state from bootloader) and provides support for all peripherals that support simple one-bit gated clocks. The covers all peripherals whose clocks come from the AHB, APB1 or APB2 buses. It has been tested on an STM32F429I-Discovery board. The clock counts for TIM2, USART1 and SYSTICK are all set correctly and the wall clock looks OK when checked with a stopwatch. I have also tested a prototype driver for the RNG hardware. The RNG clock is correctly enabled by the framework (also did inverse test and proved that by changing DT to configure the wrong clock bit then we observe the RNG driver to fail). Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Maxime Coquelin <mcoquelin.stm32@gmail.com> [sboyd@codeaurora.org: Silence sparse warnings] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-23dt-bindings: Document the STM32F4 clock bindingsDaniel Thompson1-0/+65
This adds documentation of device tree bindings for the clock related portions of the STM32 RCC block. Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-20Merge tag 'tegra-for-4.2-clk' of ↵Michael Turquette13-16/+637
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into clk-next clk: tegra: Changes for v4.2-rc1 This contains the EMC clock driver that's been exhaustively reviewed and tested. It also includes a change to the clock core that allows a clock provider to perform low-level reparenting of clocks. This is required by the EMC clock driver because the reparenting needs to be done at a very specific point in time during the EMC frequency switch.
2015-06-20Merge branch 'clk-exynos-cpu-clk' into clk-nextMichael Turquette12-212/+471
Folded into this merge commit is a build error fix: s/clk/core in clk_change_rate due to the new struct clk_core
2015-06-20cpufreq: exynos: remove Exynos4210 specific cpufreq driver supportThomas Abraham5-209/+1
Exynos4210 based platforms have switched over to use generic cpufreq driver for cpufreq functionality. So the Exynos specific cpufreq support for these platforms can be removed. Changes by Bartlomiej: - dropped Exynos5250 support removal for now - updated exynos-cpufreq.[c,h] Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20ARM: Exynos: switch to using generic cpufreq driver for Exynos4210Thomas Abraham1-1/+20
The new CPU clock type allows the use of generic CPUfreq driver. Switch Exynos4210 to using generic cpufreq driver. Changes by Bartlomiej: - removed non-Exynos4210 support for now Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu ↵Thomas Abraham1-1/+23
clock With the addition of the new Samsung specific cpu-clock type, the arm clock can be represented as a cpu-clock type. Add the CPU clock configuration data and instantiate the CPU clock type for Exynos4210. Changes by Bartlomiej: - fixed issue with wrong dividers being setup by Common Clock Framework (by an addition of CLK_RECALC_NEW_RATES clock flag to mout_apll clock, without this change cpufreq-dt driver showed ~10 mA larger energy consumption when compared to cpufreq-exynos one when "performance" cpufreq governor was used on Exynos4210 SoC based Origen board), this was probably meant to be workarounded by use of CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in the original patchset (in "[PATCH v12 6/6] clk: samsung: remove unused clock aliases and update clock flags") but using these flags is not sufficient to fix the issue observed - removed Exynos5250 and Exynos5420 support for now Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20clk: samsung: add infrastructure to register cpu clocksThomas Abraham3-1/+423
The CPU clock provider supplies the clock to the CPU clock domain. The composition and organization of the CPU clock provider could vary among Exynos SoCs. A CPU clock provider can be composed of clock mux, dividers and gates. This patch defines a new clock type for CPU clock provider and adds infrastructure to register the CPU clock providers for Samsung platforms. Changes by Bartlomiej: - fixed issue with setting lower dividers before the parent clock speed was lowered (the issue resulted in lockup on Exynos4210 SoC based Origen board when "ondemand" cpufreq governor was stress tested) - fixed missing spin_unlock on error in exynos_cpuclk_post_rate_change() problem by moving cfg_data search outside of the spin locked area - removed leftover kfree() in exynos_register_cpu_clock() that could result in dereferencing the NULL pointer on error - moved spin_lock earlier in exynos_cpuclk_pre_rate_change() to cover reading of E4210_SRC_CPU and E4210_DIV_CPU1 registers - added missing "last chance" checks to wait_until_divider_stable() and wait_until_mux_stable() (needed in case that IRQ handling took long time to proceed and resulted in function printing incorrect error message about timeout) - moved E4210_CPU_DIV[0,1]() macros just before their only users, this resulted in moving them from patch #2 to patch #3/6 ("clk: samsung: exynos4: add cpu clock configuration data and instantiate cpu clock") - removed E5250_CPU_DIV[0,1](), E5420_EGL_DIV0() and E5420_KFC_DIV() macros for now - added my Copyrights to drivers/clk/samsung/clk-cpu.c Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Thomas Abraham <thomas.ab@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-20clk: add CLK_RECALC_NEW_RATES clock flag for Exynos cpu clock supportBartlomiej Zolnierkiewicz2-0/+4
This flag is needed to fix the issue with wrong dividers being setup by Common Clock Framework when using the new Exynos cpu clock support. The issue happens because clk_core_set_rate_nolock() calls clk_calc_new_rates(clk, rate) before both pre/post clock notifiers have a chance to run. In case of Exynos cpu clock support pre/post clock notifiers are registered for mout_apll clock which is a parent of armclk cpu clock and dividers are modified in both pre and post clock notifier. This results in wrong dividers values being later programmed by clk_change_rate(top). To workaround the problem CLK_RECALC_NEW_RATES flag is added and it is set for mout_apll clock later so the correct divider values are re-calculated after both pre and post clock notifiers had run. For example when using "performance" governor on Exynos4210 Origen board the cpufreq-dt driver requests to change the frequency from 1000MHz to 1200MHz and after the change state of the relevant clocks is following: Without use of CLK_GET_RATE_NOCACHE flag: fout_apll rate: 1200000000 fout_apll_div_2 rate: 600000000 mout_clkout_cpu rate: 600000000 div_clkout_cpu rate: 600000000 clkout_cpu rate: 600000000 mout_apll rate: 1200000000 armclk rate: 1200000000 mout_hpm rate: 1200000000 div_copy rate: 300000000 div_hpm rate: 300000000 mout_core rate: 1200000000 div_core rate: 1200000000 div_core2 rate: 1200000000 arm_clk_div_2 rate: 600000000 div_corem0 rate: 300000000 div_corem1 rate: 150000000 div_periph rate: 300000000 div_atb rate: 300000000 div_pclk_dbg rate: 150000000 sclk_apll rate: 1200000000 sclk_apll_div_2 rate: 600000000 With use of CLK_GET_RATE_NOCACHE flag: fout_apll rate: 1200000000 fout_apll_div_2 rate: 600000000 mout_clkout_cpu rate: 600000000 div_clkout_cpu rate: 600000000 clkout_cpu rate: 600000000 mout_apll rate: 1200000000 armclk rate: 1200000000 mout_hpm rate: 1200000000 div_copy rate: 200000000 div_hpm rate: 200000000 mout_core rate: 1200000000 div_core rate: 1200000000 div_core2 rate: 1200000000 arm_clk_div_2 rate: 600000000 div_corem0 rate: 300000000 div_corem1 rate: 150000000 div_periph rate: 300000000 div_atb rate: 240000000 div_pclk_dbg rate: 120000000 sclk_apll rate: 150000000 sclk_apll_div_2 rate: 75000000 Without this change cpufreq-dt driver showed ~10 mA larger energy consumption when compared to cpufreq-exynos one when "performance" cpufreq governor was used on Exynos4210 SoC based Origen board. This issue was probably meant to be workarounded by use of CLK_GET_RATE_NOCACHE and CLK_DIVIDER_READ_ONLY clock flags in the original Exynos cpu clock patchset (in "[PATCH v12 6/6] clk: samsung: remove unused clock aliases and update clock flags" patch) but usage of these flags is not sufficient to fix the issue observed. Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: Tomasz Figa <tomasz.figa@gmail.com> Cc: Mike Turquette <mturquette@linaro.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-19doc: dt: add documentation for lpc1850-ccu clk driverJoachim Eastwood1-0/+77
Add DT binding documentation for lpc1850-ccu clk driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-19clk: add lpc18xx ccu clk driverJoachim Eastwood3-0/+368
Add driver for NXP LPC18xx/43xx Clock Control Unit (CCU). The CCU provides fine grained gating of most clocks present in the SoC. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-19doc: dt: add documentation for lpc1850-cgu clk driverJoachim Eastwood1-0/+131
Add DT binding documentation for lpc1850-cgu driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-19clk: add lpc18xx cgu clk driverJoachim Eastwood4-0/+678
Add driver for NXP LPC18xx/43xx Clock Generation Unit (CGU). The CGU contains several clock generators and output stages that route the clocks either directly to peripherals or to a Clock Control Unit (CCU). Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-19clk: keystone: add support for post divider register for main pllMurali Karicheri2-6/+22
Main PLL controller has post divider bits in a separate register in pll controller. Use the value from this register instead of fixed divider when available. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-19Merge tag 'sunxi-clocks-for-4.2' of ↵Michael Turquette4-5/+19
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Allwinner clocks additions for 4.2 One error fix, and one patch to add support for the USB clock found on the Allwinner A23 and A33
2015-06-18clk: mvebu: flag the crypto clk as CLK_IGNORE_UNUSEDBoris Brezillon1-1/+1
The crypto SRAM, used by the armada 370 cpuidle code to workaround a bug in the BootROM code, requires the crypto clk to be up and running. Flag the crypto clk as IGNORE_UNUSED until we add the proper infrastructure to define the crypto SRAM in the DT and reference the crypto clk in this SRAM node. Reported-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18clk: cygnus: remove Cygnus dummy clock bindingRay Jui1-34/+0
Remove old Cygnus dummy clock binding document, as it's replaced by Documentation/devicetree/bindings/clock/brcm,iproc-clocks.txt Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18clk: cygnus: add clock support for Broadcom CygnusRay Jui3-0/+334
The Broadcom Cygnus SoC is architected under the iProc architecture. It has the following PLLs: ARMPLL, GENPLL, LCPLL0, MIPIPLL, all dervied from an onboard crystal. Cygnus also has various ASIU clocks that are derived directly from the onboard crystal. Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18clk: Change bcm clocks build dependencyRay Jui1-1/+1
The clock code under drivers/clk/bcm now contains code for both the Broadcom mobile SoCs and the iProc SoCs. Change the the makefile dependency to be under config flag CONFIG_ARCH_BCM that's enabled for both families of SoCs Signed-off-by: Ray Jui <rjui@broadcom.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18clk: iproc: add initial common clock supportRay Jui6-0/+1462
This adds basic and generic support for various iProc PLLs and clocks including the ARMPLL, GENPLL, LCPLL, MIPIPLL, and ASIU clocks. SoCs under the iProc architecture can define their specific register offsets and clock parameters for their PLL and clock controllers. These parameters can be passed as arugments into the generic iProc PLL and clock setup functions Derived from code originally provided by Jonathan Richardson <jonathar@broadcom.com> Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-18clk: iproc: define Broadcom iProc clock bindingRay Jui1-0/+132
Document the device tree binding for Broadcom iProc architecture based clock controller Signed-off-by: Ray Jui <rjui@broadcom.com> Reviewed-by: Scott Branden <sbranden@broadcom.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-17MAINTAINERS: update email for Michael TurquetteMichael Turquette1-1/+1
Signed-off-by: Michael Turquette <mturquette@baylibre.com>
2015-06-17Merge branch 'clk-shmobile-for-4.2' of ↵Michael Turquette4-6/+10
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next
2015-06-17Merge remote-tracking branch 'clk/clk-next' into clk-nextMichael Turquette135-1293/+9661
2015-06-13clk: meson: add some error handling in meson_clk_register_cpu()Dan Carpenter1-4/+12
This error handling hopefully isn't needed but it make the static checkers happy. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-13clk: pxa: Fix const discarding warningStephen Boyd1-1/+1
A recent change to mark parent names as const missed this struct member so we get warnings like: drivers/clk/pxa/clk-pxa25x.c:122:2: warning: initialization discards 'const' qualifier from pointer target type Fix it. Reported-by: kbuild test robot <fengguang.wu@intel.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-11clk: Move debug_node field under DEBUG_FS flag in struct clk_coreMaxime Coquelin1-1/+1
The debug_node field is only used when DEBUG_FS config is selected, so declare it only if DEBUG_FS is selected. Signed-off-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-11clk: fixed: Add comment to clk_fixed_set_rateDaniel Thompson2-2/+8
Currently it is not made explicit why clk_fixed_set_rate() can ignore its arguments and unconditionally return success. Add a comment to explain this. We also mark the clk_ops table const since it should never be modified at runtime. Suggested-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-11clk: cdce925: Fix printk size_t warningStephen Boyd1-1/+1
drivers/clk/clk-cdce925.c:550: warning: format ‘%u’ expects type ‘unsigned int’, but argument 6 has type ‘size_t’ Cc: Mike Looijmans <mike.looijmans@topic.nl> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-06-10clk: socfpga: remove a stray tabDan Carpenter1-1/+1
This line was indented too far. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: Michael Turquette <mturquette@linaro.org>
2015-06-10clk: exynos5433: Add CLK_IGNORE_UNUSED flag to clocks for SMCJonghwa Lee1-18/+18
This patch adds 'CLK_IGNORE_UNUSED' flag to clocks which is required for operation of secure monitor call (smc). System will hang when it executes 'smc' with one of those clock is gated. All related clocks must be enabled. Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-10clk: exynos5433: Add clock flag to support the DVFS of GPUJoonyoung Shim1-9/+9
This patch adds the CLK_SET_RATE_PARENT flag for 'aclk_g3d' clock and parent clocks becuase 'aclk_g3d' is used to change GPU frequency for DVFS (Dynamic Voltage Frequency Scaling) feature and adds CLK_IGNORE_UNUSED flags to 'aclk_asyncapbs_g3d'/'aclk_asyncapbm_g3d' clocks to access the SFR of the MALI device. Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> [cw00.choi: Add patch description and add CLK_SET_RATE_PARENT to 'aclk_g3d' clk] Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-10clk: exynos5433: Add DIV_CPIF to the list of stored registers on suspendHyungwon Hwang1-0/+1
This DIV_CPIF register must be stored when the system is suspended, and must be restored on system resume. This patch adds the register to the list of restored registers. Signed-off-by: Hyungwon Hwang <human.hwang@samsung.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-10clk: exynos5433: Add CLK_SET_RATE_PARENT to support DVFS for big.LITTLE coreChanwoo Choi1-14/+12
This patch adds CLK_SET_RATE_PARENT flag to support DVFS of Cortex-{A53|A57} core (big.LITTLE core) because 'sclk_{apollo|atlas}' leaf clock is used to change the CPU frequency of Cortex-{A53|A57} core in arm_big_little.c driver. - 'apollo' word means the LITTLE core (Cortex-A53 core) in Exynos5433 TRM. - 'atlas' word means the big core (Cortex-A57 core) in Exynos5433 TRM. Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
2015-06-08Linux 4.1-rc7v4.1-rc7Linus Torvalds1-1/+1
2015-06-08Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds8-13/+8
Pull MIPS updates from Ralf Baechle: "Eight fixes across arch/mips. Nothing stands particuarly out nor is complicated but fixes keep coming in at a higher than comfortable rate" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: KVM: Do not sign extend on unsigned MMIO load MIPS: BPF: Fix stack pointer allocation MIPS: Loongson-3: Fix a cpu-hotplug issue in loongson3_ipi_interrupt() MIPS: Fix enabling of DEBUG_STACKOVERFLOW MIPS: c-r4k: Fix typo in probe_scache() MIPS: Avoid an FPE exception in FCSR mask probing MIPS: ath79: Add a missing new line in log message MIPS: ralink: Fix clearing the illegal access interrupt
2015-06-07Merge tag 'driver-core-4.1-rc7' of ↵Linus Torvalds4-6/+12
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two fixes for the driver core that resolve some reported issues. One is a regression from 4.0, the other a fixes a reported oops that has been there since 3.19. Both have been in linux-next for a while with no problems" * tag 'driver-core-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base: cacheinfo: handle absence of caches drivers: of/base: move of_init to driver_init
2015-06-07Merge tag 'staging-4.1-rc7' of ↵Linus Torvalds12-110/+148
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging / IIO fixes from Greg KH: "Here are some IIO driver fixes to resolve reported issues, some ozwpan fixes for some reported CVE problems, and a rtl8712 driver fix for a reported regression. All have been in linux-next successfully" * tag 'staging-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8712: fix stack dump ozwpan: unchecked signed subtraction leads to DoS ozwpan: divide-by-zero leading to panic ozwpan: Use unsigned ints to prevent heap overflow ozwpan: Use proper check to prevent heap overflow iio: adc: twl6030-gpadc: Fix modalias iio: adis16400: Fix burst transfer for adis16448 iio: adis16400: Fix burst mode iio: adis16400: Compute the scan mask from channel indices iio: adis16400: Use != channel indices for the two voltage channels iio: adis16400: Report pressure channel scale
2015-06-07Merge tag 'tty-4.1-rc7' of ↵Linus Torvalds4-22/+105
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are a few TTY and Serial driver fixes for reported regressions and crashes. All of these have been in linux-next with no reported problems" * tag 'tty-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: n_tty: Fix auditing support for cannonical mode serial: 8250_omap: provide complete custom startup & shutdown callbacks n_tty: Fix calculation of size in canon_copy_from_read_buf serial: imx: Fix DMA handling for IDLE condition aborts serial/amba-pl011: Unconditionally poll for FIFO space before each TX char
2015-06-07Merge tag 'usb-4.1-rc7' of ↵Linus Torvalds20-63/+123
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB and PHY driver fixes from Greg KH: "Here are some USB and PHY driver fixes that resolve some reported regressions. Also in here are some new device ids. All of the details are in the shortlog and these patches have been in linux-next with no problems" * tag 'usb-4.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (22 commits) USB: cp210x: add ID for HubZ dual ZigBee and Z-Wave dongle usb: renesas_usbhs: Don't disable the pipe if Control write status stage usb: renesas_usbhs: Fix fifo unclear in usbhsf_prepare_pop usb: gadget: f_fs: fix check in read operation usb: musb: fix order of conditions for assigning end point operations usb: gadget: f_uac1: check return code from config_ep_by_speed usb: gadget: ffs: fix: Always call ffs_closed() in ffs_data_clear() usb: gadget: g_ffs: Fix counting of missing_functions usb: s3c2410_udc: correct reversed pullup logic usb: dwc3: gadget: Fix incorrect DEPCMD and DGCMD status macros usb: phy: tahvo: Pass the IRQF_ONESHOT flag usb: phy: ab8500-usb: Pass the IRQF_ONESHOT flag usb: renesas_usbhs: Revise the binding document about the dma-names usb: host: xhci: add mutex for non-thread-safe data usb: make module xhci_hcd removable USB: serial: ftdi_sio: Add support for a Motion Tracker Development Board usb: gadget: f_midi: fix segfault when reading empty id phy: phy-rcar-gen2: Fix USBHS_UGSTS_LOCK value phy: omap-usb2: invoke pm_runtime_disable on error path phy: fix Kconfig dependencies ...
2015-06-07Merge tag 'devicetree-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux Pull devicetree fix from Grant Likely: "Stupid typo fix for v4.1. One of the IS_ENABLED() macro calls forgot the CONFIG_ prefix. Only affects a tiny number of platforms, but still..." * tag 'devicetree-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/glikely/linux: of/dynamic: Fix test for PPC_PSERIES
2015-06-06Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds6-15/+20
Pull drm fixes from Dave Airlie: "i915 has a bunch of fixes, and Russell found a bug in sysfs writing handling that results in userspace getting stuck" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: fix writing to /sys/class/drm/*/status drm/i915: Move WaBarrierPerformanceFixDisable:skl to skl code from chv code drm/i915: Include G4X/VLV/CHV in self refresh status drm/i915: Initialize HWS page address after GPU reset drm/i915: Don't skip request retirement if the active list is empty drm/i915/hsw: Fix workaround for server AUX channel clock divisor
2015-06-06Merge branch 'for-linus' of ↵Linus Torvalds2-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem fixes from Dmitry Torokhov: "Just a couple touchpad drivers fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: alps - do not reduce trackpoint speed by half Input: elantech - add new icbody type Input: elantech - fix detection of touchpads where the revision matches a known rate
2015-06-06Merge branch 'stable/for-linus-4.1' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "Tiny little fix which just converts an function to be static. Really tiny" * 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: swiotlb: do not export map_single function
2015-06-06Merge branch 'stable/for-linus-4.1' of ↵Linus Torvalds1-15/+21
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull iBFT fix from Konrad Rzeszutek Wilk: "One single fix from Chris to workaround UEFI platforms failing with iSCSI IBFT" * 'stable/for-linus-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: filter null v4-mapped v6 addresses
2015-06-06MIPS: KVM: Do not sign extend on unsigned MMIO loadNicholas Mc Guire1-1/+1
Fix possible unintended sign extension in unsigned MMIO loads by casting to uint16_t in the case of mmio_needed != 2. Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: James Hogan <james.hogan@imgtec.com> Tested-by: James Hogan <james.hogan@imgtec.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/9985/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-06MIPS: BPF: Fix stack pointer allocationMarkos Chandras1-5/+1
Fix stack pointer offset which could potentially corrupt argument registers in the previous frame. The calculated offset reflects the size of all the registers we need to preserve so there is no need for this erroneous subtraction. [ralf@linux-mips.org: Fixed conflict due to only applying this fix part of the entire series as part of 4.1 fixes.] Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: netdev@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Cc: Daniel Borkmann <dborkman@redhat.com> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Cc: linux-kernel@vger.kernel.org Cc: linux-mips@linux-mips.org Patchwork: http://patchwork.linux-mips.org/patch/10527/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-06MIPS: Loongson-3: Fix a cpu-hotplug issue in loongson3_ipi_interrupt()Huacai Chen1-1/+1
setup_per_cpu_areas() only setup __per_cpu_offset[] for each possible cpu, but loongson_sysconf.nr_cpus can be greater than possible cpus (due to reserved_cpus_mask). So in loongson3_ipi_interrupt(), percpu access will touch the original varible in .data..percpu section which has been freed. Without this patch, cpu-hotplug will cause memery corruption. Signed-off-by: Huacai Chen <chenhc@lemote.com> Cc: John Crispin <john@phrozen.org> Cc: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Fuxin Zhang <zhangfx@lemote.com> Cc: Zhangjin Wu <wuzhangjin@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/10524/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-06MIPS: Fix enabling of DEBUG_STACKOVERFLOWJames Hogan1-1/+1
Commit 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") added kernel stack overflow detection, however it only enabled it conditional upon the preprocessor definition DEBUG_STACKOVERFLOW, which is never actually defined. The Kconfig option is called DEBUG_STACKOVERFLOW, which manifests to the preprocessor as CONFIG_DEBUG_STACKOVERFLOW, so switch it to using that definition instead. Fixes: 334c86c494b9 ("MIPS: IRQ: Add stackoverflow detection") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Adam Jiang <jiang.adam@gmail.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 2.6.37+ Patchwork: http://patchwork.linux-mips.org/patch/10531/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-06-06MIPS: c-r4k: Fix typo in probe_scache()Joshua Kinard1-1/+1
Fixes a typo in arch/mips/mm/c-r4k.c's probe_scache(). Signed-off-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-13 18:42:43 +0300