summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2009-11-17net/can/mscan: replace hardcoded values with definesWolfram Sang2-5/+15
Not all hardcoded values have been replaced as this made the code quite unreadable. IMHO this compromise serves the purpose of readability. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mpc52xx_can: improve properties and their descriptionWolfram Sang2-6/+6
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: devicetree-discuss@ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mpc52xx_can: refactor clock-get routineWolfram Sang1-29/+16
Merge two functions into one. The result is smaller as they can now share some variables. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: drop assignment in while-constructWolfram Sang1-2/+4
As suggested by Wolfgang Grandegger. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: fix function annotationsWolfram Sang2-4/+1
- use extern where apropriate - don't export symbols Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: use {clr|set}bits8 macrosWolfram Sang1-12/+7
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: drop support for CAN_MODE_{SLEEP|STOP}Wolfram Sang1-8/+0
The upper layer does not support it yet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: trivial fixesWolfram Sang2-23/+18
- remove whitespaces - use ! and ?: when apropriate - make braces consistent Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: move defines into .h fileWolfram Sang2-29/+29
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17Merge branch 'master' of ↵David S. Miller32-467/+365
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/can/Kconfig
2009-11-17KS8695: fix ks8695_rx() unreasonable action.zeal1-7/+6
ks8695_rx() will call refill_buffers() for every incoming packet. Its not necessary. We just need do it after finishing receiving thing. And the 'RX dma engine' is in the same situation. This blocks our user space application. The following patch may fix it. Signed-off-by: zeal <zealcook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17KS8695: fix ks8695_rx_irq() bug.zeal1-15/+7
ks8695 rx irq is edge-level. Before arriving at irq handler, the corresponding status bit has been clear(irq's ack). So we should not check it after that. Signed-off-by: zeal <zealcook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17ppp: fix BUG on non-linear SKB (multilink receive)Ben McKeegan1-2/+9
PPP does not correctly call pskb_may_pull() on all necessary receive paths before reading the PPP protocol, thus causing PPP to report seemingly random 'unsupported protocols' and eventually trigger BUG_ON(skb->len < skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in non-linear skbs. ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the protocol number. For the non-mp receive path this is not a problem, as this check is done in ppp_receive_frame(). For the mp receive path, ppp_mp_reconstruct() usually copies the data into a new linear skb. However, in the case where the frame is made up of a single mp fragment, the mp header is pulled and the existing skb used. This skb was then passed to ppp_receive_nonmp_frame() without checking if the encapsulated protocol header could safely be read. Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17ixgbe: Fixing EEH handler to handle more than one errorBreno Leitao1-0/+1
After commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17Merge branch 'master' of ↵David S. Miller6-165/+45
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-11-16net: Fix the rollback test in dev_change_name()Eric Dumazet1-5/+6
net: Fix the rollback test in dev_change_name() In dev_change_name() an err variable is used for storing the original call_netdevice_notifiers() errno (negative) and testing for a rollback error later, but the test for non-zero is wrong, because the err might have positive value as well - from dev_alloc_name(). It means the rollback for a netdevice with a number > 0 will never happen. (The err test is reordered btw. to make it more readable.) Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: allow dynamic change of rx checksummingFrank Blaschka3-23/+41
Technically there is no need to set the card offline to change RX checksumming. Get rid of this stupid limitation. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: rework TSO functionsFrank Blaschka7-98/+110
The maximum TSO size OSA can handle is 15 * PAGE_SIZE. This patch reduces gso_max_size to this value and adds some sanity checks and statistics to the TSO implementation. Since only layer 3 is able to do TSO move all TSO related functions to the qeth_l3 module. Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: Recognize return codes of ccw_device_set_onlineUrsula Braun3-46/+31
Setting a qeth device online requires to call function ccw_device_set_online() for read-, write-, and data-subchannel. Failures should be detected immediately without an attempt to invoke follow-on activity qeth_qdio_clear_card()., In addition, ccw_device_set_online calls are consolidated in qeth_core_main.c only. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: remaining EDDP cleanupUrsula Braun1-2/+0
EDDP code has been removed from qeth in 2009. This patch removes two useless remaining EDDP-references. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16qeth: Exploit Connection IsolationEinar Lueck6-12/+267
Isolate data connection to a shared OSA card against other data connections to the same OSA card. Connectivity between isolated data connections sharing the same OSA card is therefore possible only through external network gear (e.g. a router). Signed-off-by: Einar Lueck <elelueck@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16Revert "isdn: isdn_ppp: Use SKB list facilities instead of home-grown ↵David S. Miller2-190/+164
implementation." This reverts commit 38783e671399b5405f1fd177d602c400a9577ae6. It causes kernel bugzilla #14594 Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16remove deprecated and not used: print_mac()Marin Mitov2-11/+0
The function print_mac in net/ethernet/eth.c is marked __deprecated and not used. Remove it. Signed-off-by: Marin Mitov <mitov@issp.bas.bg> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16bonding: fix 802.3ad standards compliance errorJay Vosburgh1-42/+43
The language of 802.3ad 43.4.9 requires the "recordPDU" function to, in part, compare the Partner parameter values in a received LACPDU to the stored Actor values. If those match, then the Partner's synchronization state is set to true. The current 802.3ad implementation is performing these steps out of order; first, the synchronization check is done, then the paramters are checked to see if they match (the synch check being done against a match check of a prior LACPDU). This causes delays in establishing aggregators in some circumstances. This patch modifies the 802.3ad code to call __choose_matched, the function that does the "match" comparisions, as the first step of __record_pdu, instead of immediately afterwards. This new behavior is in compliance with the language of the standard. Some additional commentary relating to code vs. standard is also added. Reported by Martin Patterson <martin@gear6.com> who also supplied the logic of the fix and verified the patch. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16vlan: Use __vlan_hwaccel_put_tag() in rxEric Dumazet1-2/+2
Commit 05423b241311c9380 (vlan: allow null VLAN ID to be used) forgot to update __vlan_hwaccel_rx() & vlan_gro_common() We need to set VLAN_TAG_PRESENT flag in skb->vlan_tci Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16TI Davinci EMAC : Fix Console Hang when bringing the interface downSriram1-3/+0
In the NAPI poll function(emac_poll), check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in a continuous softirq loop when the interface is brought down under heavy traffic(tested wit Traffic Generator). Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan <srk@ti.com> Acked-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16smsc911x: Fix Console Hang when bringing the interface down.Sriram1-1/+1
In the NAPI poll function, check for netif_running() is unnecassary. In addition to associated runtime overhead, it also results in continuous softirq loop when the interface is brought down under heavy traffic(tested with Traffic Generator).Once the interface is disabled, the poll function always returns zero(with the check for netif_running) and napi_complete() would never get called resulting in softirq loop. Signed-off-by: Sriramakrishnan <srk@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Update version to 3.104Matt Carlson1-2/+2
This patch updates the tg3 version to 3.104. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Fix DIDs, Enable 5717 supportMatt Carlson2-8/+9
This patch fixes the 5717 variant device ID enumerations and adds those DIDs to the PCI ID table. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Add rx prod ring consolidationMatt Carlson2-10/+164
This patch adds code to funnel each MSI-X vector's rx packet buffers into a single set of producer rings which will then be submitted to the hardware. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Create aliases for rx producer mailbox regsMatt Carlson2-12/+10
The rx producer mailbox registers are used in several spots in the code. The addition of TG3_64BIT_REG_LOW makes register references uncomfortably long. This patch creates an alias for the standard and jumbo ring producer index registers to make the code cleaner. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Lay proucer ring handling groundworkMatt Carlson2-37/+50
The patch increases the number of producer rings available and implements the constructor and destructor code that deals with them. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Consider rx_std_prod_idx a hw mailboxMatt Carlson1-6/+9
This patch changes how the code uses the rx_std_prod_idx member. In the following patch, the code will be changed so that it will act just like a hardware mailbox. This patch prepares the code so that memory barriers can be more easily inserted. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: rename rx_[std|jmb]_ptrMatt Carlson2-10/+10
A later patch is going to add consumer indicies for the producer rings. To keep things readable, this patch renames rx_[std|jmb]_ptr to rx_[std|jmb]_prod_idx. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: tg3_alloc_rx_skb(tnapi => tp)Matt Carlson1-7/+4
This patch converts the tnapi argument of tg3_alloc_rx_skb() to tp. The level of indirection is unnecessary. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Add prodring parameter to tg3_alloc_rx_skb()Matt Carlson1-20/+21
This patch changes the tg3_alloc_rx_skb() implementation to accept the destination producer ring set pointer as a parameter rather than assuming the source and destination producer rings are the same. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Make tg3_alloc_rx_skb() a dst-only operationMatt Carlson1-13/+9
This patch removes the source index parameter of tg3_alloc_rx_skb(). A later patch will make it possible for the source and destination producer rings to be different. This patch opts to make tg3_alloc_rx_skb() a destination-only implementation and move the code sensitive to the difference elsewhere. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Move napi_add calls below tg3_get_invariantsMatt Carlson1-47/+47
tg3_get_invariants(), among other things, discovers whether or not the device is MSI-X capable and how many interrupts it supports. This discovery needs to happen before registering NAPI instances with netdev. This patch moves the code block that calls napi_add later in tg3_init_one() so that tg3_get_invariants() has a chance to run first. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Create tg3_poll_msix() for non-zero MSIX vecsMatt Carlson1-8/+60
This patch gives all non-zero MSIX vectors their own NAPI handler. This will make NAPI handling for those vectors slightly more efficient. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Allow DMAs to cross cacheline boundariesMatt Carlson2-7/+16
By default, the 5717 (and future chips) break up PCIe DMA packets across cacheline boundaries. This isn't necessary on x86. This patch selectively loosens the restriction. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Use tg3_start_xmit_dma_bug for 5717 A0Matt Carlson2-9/+19
The A0 revision of the 5717 has problems with short packet fragments. It needs to use the tg3_start_xmit_dma_bug() routine. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Add new HW_TSO_3 flag for 5717Matt Carlson2-19/+27
The 5717 sets up TSO slightly differently in the transmit path. It looks like this method will be the new way of doing things. This patch defines a flag to indicate this. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Refine TSO and MSI discoveryMatt Carlson1-30/+34
This patch consolidates the TSO capability discovery code into its own code block. The code that decides whether or not to allow TSO is then cleaned up. Finally, the patch consolidates all MSI and MSIX capability code into a single code block. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Move TG3_FLG2_PROTECTED_NVRAM to tg3_flags3Matt Carlson2-7/+7
We need room for another TSO flag and it would be most efficient if it resided in tg3_flags2. This patch moves the TG3_FLG2_PROTECTED_NVRAM to tg3_flags3 to make room. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Napify tg3_start_xmit_dma_bug()Matt Carlson1-13/+19
This patch converts tg3_start_xmit_dma_bug() to accomodate multiple NAPI instances. This is prep work for a later patch in this series. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Don't touch RCB nic addressesMatt Carlson1-4/+6
This patch avoids reprogramming the RCB NIC addresses for all 5755 and later devices. The address is incorrect for 5717 devices and should be correct by default for all other affected devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16tg3: Add 5717 phy IDMatt Carlson2-1/+3
This patch adds the 5717 phy ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16net: Optimize hard_start_xmit() return checkingJarek Poplawski3-47/+35
Recent changes in the TX error propagation require additional checking and masking of values returned from hard_start_xmit(), mainly to separate cases where skb was consumed. This aim can be simplified by changing the order of NETDEV_TX and NET_XMIT codes, because the latter are treated similarly to negative (ERRNO) values. After this change much simpler dev_xmit_complete() is also used in sch_direct_xmit(), so it is moved to netdevice.h. Additionally NET_RX definitions in netdevice.h are moved up from between TX codes to avoid confusion while reading the TX comment. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16iwmc3200top: simplify the driver versionTomas Winkler1-15/+1
drop the version parts not needed for in-tree driver Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16iwmc3200top: use prefered style for the device table.Tomas Winkler1-11/+3
Use device id number directly accompany with comment rather then a #define Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-04 14:37:09 +0300