summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-08-02RDMA/rxe: Use the correct size of wqe when processing SRQBob Pearson1-1/+1
The memcpy() that copies a WQE from a SRQ the QP uses an incorrect size. The size should have been the size of the rxe_send_wqe struct not the size of a pointer to it. The result is that IO operations using a SRQ on the responder side will fail. Fixes: ec0fa2445c18 ("RDMA/rxe: Fix over copying in get_srq_wqe") Link: https://lore.kernel.org/r/20210729220039.18549-2-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-02RDMA/cma: Revert INIT-INIT patchMike Marciniszyn1-1/+16
The net/sunrpc/xprtrdma module creates its QP using rdma_create_qp() and immediately post receives, implicitly assuming the QP is in the INIT state and thus valid for ib_post_recv(). The patch noted in Fixes: removed the RESET->INIT modifiy from rdma_create_qp(), breaking NFS rdma for verbs providers that fail the ib_post_recv() for a bad state. This situation was proven using kprobes in rvt_post_recv() and rvt_modify_qp(). The traces showed that the rvt_post_recv() failed before ANY modify QP and that the current state was RESET. Fix by reverting the patch below. Fixes: dc70f7c3ed34 ("RDMA/cma: Remove unnecessary INIT->INIT transition") Link: https://lore.kernel.org/r/1627583182-81330-1-git-send-email-mike.marciniszyn@cornelisnetworks.com Cc: Haakon Bugge <haakon.bugge@oracle.com> Cc: Chuck Lever III <chuck.lever@oracle.com> Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-02RDMA/mlx5: Delay emptying a cache entry when a new MR is added to it recentlyAharon Landau1-2/+2
Fixing a typo that causes a cache entry to shrink immediately after adding to it new MRs if the entry size exceeds the high limit. In doing so, the cache misses its purpose to prevent the creation of new mkeys on the runtime by using the cached ones. Fixes: b9358bdbc713 ("RDMA/mlx5: Fix locking in MR cache work queue") Link: https://lore.kernel.org/r/fcb546986be346684a016f5ca23a0567399145fa.1627370131.git.leonro@nvidia.com Signed-off-by: Aharon Landau <aharonl@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
2021-08-02gpio: tqmx86: really make IRQ optionalMatthias Schiffer1-3/+3
The tqmx86 MFD driver was passing IRQ 0 for "no IRQ" in the past. This causes warnings with newer kernels. Prepare the gpio-tqmx86 driver for the fixed MFD driver by handling a missing IRQ properly. Fixes: b868db94a6a7 ("gpio: tqmx86: Add GPIO from for this IO controller") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-08-02Revert "mhi: Fix networking tree build."Jakub Kicinski1-6/+1
This reverts commit 40e159403896f7d55c98f858d0b20fee1d941fa4. Looks like this commit breaks the build for me. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-02docs: operstates: document IF_OPER_TESTINGJakub Kicinski1-1/+3
IF_OPER_TESTING is in fact used today. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02docs: operstates: fix typoJakub Kicinski1-1/+1
TVL -> TLV Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: sparx5: fix compiletime_assert for GCC 4.9Jakub Kicinski1-6/+13
Stephen reports sparx5 broke GCC 4.9 build. Move the compiletime_assert() out of the static function. Compile-tested only, no object code changes. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Fixes: f3cad2611a77 ("net: sparx5: add hostmode with phylink support") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: natsemi: Fix missing pci_disable_device() in probe and removeWang Hai1-6/+2
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() and pci_release_regions() will be called in release automatically. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: phy: micrel: Fix detection of ksz87xx switchSteve Bennett1-5/+5
The logic for discerning between KSZ8051 and KSZ87XX PHYs is incorrect such that the that KSZ87XX switch is not identified correctly. ksz8051_ksz8795_match_phy_device() uses the parameter ksz_phy_id to discriminate whether it was called from ksz8051_match_phy_device() or from ksz8795_match_phy_device() but since PHY_ID_KSZ87XX is the same value as PHY_ID_KSZ8051, this doesn't work. Instead use a bool to discriminate the caller. Without this patch, the KSZ8795 switch port identifies as: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Generic PHY] With the patch, it identifies correctly: ksz8795-switch spi3.1 ade1 (uninitialized): PHY [dsa-0.1:03] driver [Micrel KSZ87XX Switch] Fixes: 8b95599c55ed24b36cf4 ("net: phy: micrel: Discern KSZ8051 and KSZ8795 PHYs") Signed-off-by: Steve Bennett <steveb@workware.net.au> Reviewed-by: Marek Vasut <marex@denx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02selinux: correct the return value when loads initial sidsXiu Jianfeng1-6/+4
It should not return 0 when SID 0 is assigned to isids. This patch fixes it. Cc: stable@vger.kernel.org Fixes: e3e0b582c321a ("selinux: remove unused initial SIDs and improve handling") Signed-off-by: Xiu Jianfeng <xiujianfeng@huawei.com> [PM: remove changelog from description] Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-08-02Merge branch 'sja1105-fdb-fixes'David S. Miller2-37/+84
Vladimir Oltean says: ==================== FDB fixes for NXP SJA1105 I have some upcoming patches that make heavy use of statically installed FDB entries, and when testing them on SJA1105P/Q/R/S and SJA1110, it became clear that these switches do not behave reliably at all. - On SJA1110, a static FDB entry cannot be installed at all - On SJA1105P/Q/R/S, it is very picky about the inner/outer VLAN type - Dynamically learned entries will make us not install static ones, or even if we do, they might not take effect Patch 5/6 has a conflict with net-next (sorry), the commit message of that patch describes how to deal with it. Thanks. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: match FDB entries regardless of inner/outer VLAN tagVladimir Oltean1-4/+0
On SJA1105P/Q/R/S and SJA1110, the L2 Lookup Table entries contain a maskable "inner/outer tag" bit which means: - when set to 1: match single-outer and double tagged frames - when set to 0: match untagged and single-inner tagged frames - when masked off: match all frames regardless of the type of tag This driver does not make any meaningful distinction between inner tags (matches on TPID) and outer tags (matches on TPID2). In fact, all VLAN table entries are installed as SJA1110_VLAN_D_TAG, which means that they match on both inner and outer tags. So it does not make sense that we install FDB entries with the IOTAG bit set to 1. In VLAN-unaware mode, we set both TPID and TPID2 to 0xdadb, so the switch will see frames as outer-tagged or double-tagged (never inner). So the FDB entries will match if IOTAG is set to 1. In VLAN-aware mode, we set TPID to 0x8100 and TPID2 to 0x88a8. So the switch will see untagged and 802.1Q-tagged packets as inner-tagged, and 802.1ad-tagged packets as outer-tagged. So untagged and 802.1Q-tagged packets will not match FDB entries if IOTAG is set to 1, but 802.1ad tagged packets will. Strange. To fix this, simply mask off the IOTAG bit from FDB entries, and make them match regardless of whether the VLAN tag is inner or outer. Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 tooVladimir Oltean1-14/+4
Similar but not quite the same with what was done in commit b11f0a4c0c81 ("net: dsa: sja1105: be stateless when installing FDB entries") for SJA1105E/T, it is desirable to drop the priv->vlan_aware check and simply go ahead and install FDB entries in the VLAN that was given by the bridge. As opposed to SJA1105E/T, in SJA1105P/Q/R/S and SJA1110, the FDB is a maskable TCAM, and we are installing VLAN-unaware FDB entries with the VLAN ID masked off. However, such FDB entries might completely obscure VLAN-aware entries where the VLAN ID is included in the search mask, because the switch looks up the FDB from left to right and picks the first entry which results in a masked match. So it depends on whether the bridge installs first the VLAN-unaware or the VLAN-aware FDB entries. Anyway, if we had a VLAN-unaware FDB entry towards one set of DESTPORTS and a VLAN-aware one towards other set of DESTPORTS, the result is that the packets in VLAN-aware mode will be forwarded towards the DESTPORTS specified by the VLAN-unaware entry. To solve this, simply do not use the masked matching ability of the FDB for VLAN ID, and always match precisely on it. In VLAN-unaware mode, we configure the switch for shared VLAN learning, so the VLAN ID will be ignored anyway during lookup, so it is redundant to mask it off in the TCAM. This patch conflicts with net-next commit 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") which changed this line: if (priv->vlan_state != SJA1105_VLAN_UNAWARE) { into: if (priv->vlan_aware) { When merging with net-next, the lines added by this patch should take precedence in the conflict resolution (i.e. the "if" condition should be deleted in both cases). Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a ↵Vladimir Oltean1-3/+8
new address Currently, when sja1105pqrs_fdb_add() is called for a host-joined IPv6 MDB entry such as 33:33:00:00:00:6a, the search for that address will return the FDB entry for SJA1105_UNKNOWN_MULTICAST, which has a destination MAC of 01:00:00:00:00:00 and a mask of 01:00:00:00:00:00. It returns that entry because, well, it matches, in the sense that unknown multicast is supposed by design to match it... But the issue is that we then proceed to overwrite this entry with the one for our precise host-joined multicast address, and the unknown multicast entry is no longer there - unknown multicast is now flooded to the same group of ports as broadcast, which does not look up the FDB. To solve this problem, we should ignore searches that return the unknown multicast address as the match, and treat them as "no match" which will result in the entry being installed to hardware. For this to work properly, we need to put the result of the FDB search in a temporary variable in order to avoid overwriting the l2_lookup entry we want to program. The l2_lookup entry returned by the search might not have the same set of DESTPORTS and not even the same MACADDR as the entry we're trying to add. Fixes: 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: invalidate dynamic FDB entries learned concurrently with ↵Vladimir Oltean1-2/+55
statically added ones The procedure to add a static FDB entry in sja1105 is concurrent with dynamic learning performed on all bridge ports and the CPU port. The switch looks up the FDB from left to right, and also learns dynamically from left to right, so it is possible that between the moment when we pick up a free slot to install an FDB entry, another slot to the left of that one becomes free due to an address ageing out, and that other slot is then immediately used by the switch to learn dynamically the same address as we're trying to add statically. The result is that we succeeded to add our static FDB entry, but it is being shadowed by a dynamic FDB entry to its left, and the switch will behave as if our static FDB entry did not exist. We cannot really prevent this from happening unless we make the entire process to add a static FDB entry a huge critical section where address learning is temporarily disabled on _all_ ports, and then re-enabled according to the configuration done by sja1105_port_set_learning. However, that is kind of disruptive for the operation of the network. What we can do alternatively is to simply read back the FDB for dynamic entries located before our newly added static one, and delete them. This will guarantee that our static FDB entry is now operational. It will still not guarantee that there aren't dynamic FDB entries to the _right_ of that static FDB entry, but at least those entries will age out by themselves since they aren't hit, and won't bother anyone. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: overwrite dynamic FDB entries with static ones in ↵Vladimir Oltean1-4/+6
.port_fdb_add The SJA1105 switch family leaves it up to software to decide where within the FDB to install a static entry, and to concatenate destination ports for already existing entries (the FDB is also used for multicast entries), it is not as simple as just saying "please add this entry". This means we first need to search for an existing FDB entry before adding a new one. The driver currently manages to fool itself into thinking that if an FDB entry already exists, there is nothing to be done. But that FDB entry might be dynamically learned, case in which it should be replaced with a static entry, but instead it is left alone. This patch checks the LOCKEDS ("locked/static") bit from found FDB entries, and lets the code "goto skip_finding_an_index;" if the FDB entry was not static. So we also need to move the place where we set LOCKEDS = true, to cover the new case where a dynamic FDB entry existed but was dynamic. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Fixes: 1da73821343c ("net: dsa: sja1105: Add FDB operations for P/Q/R/S series") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02net: dsa: sja1105: fix static FDB writes for SJA1110Vladimir Oltean1-13/+14
The blamed commit made FDB access on SJA1110 functional only as far as dumping the existing entries goes, but anything having to do with an entry's index (adding, deleting) is still broken. There are in fact 2 problems, all caused by improperly inheriting the code from SJA1105P/Q/R/S: - An entry size is SJA1110_SIZE_L2_LOOKUP_ENTRY (24) bytes and not SJA1105PQRS_SIZE_L2_LOOKUP_ENTRY (20) bytes - The "index" field within an FDB entry is at bits 10:1 for SJA1110 and not 15:6 as in SJA1105P/Q/R/S This patch moves the packing function for the cmd->index outside of sja1105pqrs_common_l2_lookup_cmd_packing() and into the device specific functions sja1105pqrs_l2_lookup_cmd_packing and sja1110_l2_lookup_cmd_packing. Fixes: 74e7feff0e22 ("net: dsa: sja1105: fix dynamic access to L2 Address Lookup table for SJA1110") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02Merge tag 'mvebu-fixes-5.14-1' of ↵Arnd Bergmann1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.14 (part 1) - Fix i2c property for armada-3720-turris-mox in order to use SFP - Add mmc alias on armada-3720-turris-mox to allow rootfs using the right mmc * tag 'mvebu-fixes-5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: armada-3720-turris-mox: remove mrvl,i2c-fast-mode arm64: dts: armada-3720-turris-mox: fixed indices for the SDHC controllers Link: https://lore.kernel.org/r/87k0l7zx4v.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'stm32-dt-for-v5.14-fixes-1' of ↵Arnd Bergmann2-11/+18
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/fixes STM32 DT fixes for v5.14, round 1 Highlights: ----------- -Fixes are for DHCOM/DHCOR boards: - Set HW RTC ad default RTC - Disable EDPD LAN8710 feature as it is not a stable feature. - Fix touchscreen IRQ line assignment * tag 'stm32-dt-for-v5.14-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: ARM: dts: stm32: Fix touchscreen IRQ line assignment on DHCOM ARM: dts: stm32: Disable LAN8710 EDPD on DHCOM ARM: dts: stm32: Prefer HW RTC on DHCOM SoM Link: https://lore.kernel.org/r/c0b6031b-2de7-2ef8-71b2-a0af8f475932@foss.st.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'tee-kexec-fixes-for-v5.14' of ↵Arnd Bergmann9-19/+132
git://git.linaro.org:/people/jens.wiklander/linux-tee into arm/fixes tee: Improve support for kexec and kdump This fixes several bugs uncovered while exercising the OP-TEE, ftpm (firmware TPM), and tee_bnxt_fw (Broadcom BNXT firmware manager) drivers with kexec and kdump (emergency kexec) based workflows. * tag 'tee-kexec-fixes-for-v5.14' of git://git.linaro.org:/people/jens.wiklander/linux-tee: firmware: tee_bnxt: Release TEE shm, session, and context during kexec tpm_ftpm_tee: Free and unregister TEE shared memory during kexec tee: Correct inappropriate usage of TEE_SHM_DMA_BUF flag tee: add tee_shm_alloc_kernel_buf() optee: Clear stale cache entries during initialization optee: fix tee out of memory failure seen during kexec reboot optee: Refuse to load the driver under the kdump kernel optee: Fix memory leak when failing to register shm pages Link: https://lore.kernel.org/r/20210726081039.GA2482361@jade Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'imx-fixes-5.14' of ↵Arnd Bergmann8-80/+40
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.14: - A couple of fixes on MMDC driver to add missing iounmap() and clk_disable_unprepare(), and a follow-up fix. - Fix missing-prototypes warning in SRC driver. - Revert commit 7d981405d0fd ("soc: imx8m: change to use platform driver"), which breaks i.MX8M system that has CAAM driver enabled. - One fix on imx53-m53menlo pinctrl configuration. - Increase the PHY reset duration for imx6qdl-sr-som to fix intermittent issues where the PHY would be unresponsive every once in a while. - Add missing flag for in-band signalling between PHY and MAC on kontron-sl28-var2 board to fix network support. - Limit the SDIO Clock on Colibri iMX6ULL to 25MHz for fixing wireless noise issue. - Fix sysclk node name for LS1028A so that U-Boot is able to update the "clock-frequency" property. * tag 'imx-fixes-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: ARM: dts: imx: Swap M53Menlo pinctrl_power_button/pinctrl_power_out pins ARM: imx: fix missing 3rd argument in macro imx_mmdc_perf_init ARM: dts: colibri-imx6ull: limit SDIO clock to 25MHz arm64: dts: ls1028: sl28: fix networking for variant 2 Revert "soc: imx8m: change to use platform driver" ARM: dts: imx6qdl-sr-som: Increase the PHY reset duration to 10ms ARM: imx: common: Move prototype outside the SMP block ARM: imx: add missing clk_disable_unprepare() ARM: imx: add missing iounmap() arm64: dts: ls1028a: fix node name for the sysclk Link: https://lore.kernel.org/r/20210726023221.GF5901@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02ARM: ixp4xx: goramo_mlr depends on old PCI driverArnd Bergmann1-0/+1
When this driver is disabled, the board file fails to build, so add a dependency: arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_preinit': arch/arm/mach-ixp4xx/goramo_mlr.c:472:9: error: implicit declaration of function 'ixp4xx_pci_preinit'; did you mean 'iop3xx_pci_preinit'? [-Werror=implicit-function-declaration] 472 | ixp4xx_pci_preinit(); | ^~~~~~~~~~~~~~~~~~ | iop3xx_pci_preinit arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_pci_postinit': arch/arm/mach-ixp4xx/goramo_mlr.c:481:22: error: implicit declaration of function 'ixp4xx_pci_read' [-Werror=implicit-function-declaration] 481 | if (!ixp4xx_pci_read(addr, NP_CMD_CONFIGREAD, &value)) { | ^~~~~~~~~~~~~~~ arch/arm/mach-ixp4xx/goramo_mlr.c:231:35: error: 'IXP4XX_UART1_BASE_PHYS' undeclared here (not in a function) 231 | .start = IXP4XX_UART1_BASE_PHYS, | ^~~~~~~~~~~~~~~~~~~~~~ arch/arm/mach-ixp4xx/goramo_mlr.c: In function 'gmlr_init': arch/arm/mach-ixp4xx/goramo_mlr.c:376:9: error: implicit declaration of function 'ixp4xx_sys_init' [-Werror=implicit-function-declaration] 376 | ixp4xx_sys_init(); | ^~~~~~~~~~~~~~~ Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: soc@kernel.org Link: https://lore.kernel.org/r/20210721151620.2373500-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02ARM: ixp4xx: fix compile-testing soc driversArnd Bergmann3-3/+1
Randconfig builds on the ixp4xx ethernet driver showed that the qmgr and npe drivers are not actually built even when compile testing is enabled: ERROR: modpost: "qmgr_stat_empty" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_enable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_set_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "__qmgr_request_queue" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_send_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_recv_message" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_load_firmware" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "npe_running" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_disable_irq" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! ERROR: modpost: "qmgr_stat_below_low_watermark" [drivers/net/ethernet/xscale/ixp4xx_eth.ko] undefined! Fix it by always entering the drivers/soc/ixp4xx/ directory, and fix the resulting compile test failures by removing the #include statements that prevent building on most other platforms. Fixes: 7a6c9dbb36a4 ("soc: ixp4xx: Protect IXP4xx SoC drivers by ARCH_IXP4XX || COMPILE_TEST") Fixes: fcf2d8978cd5 ("ARM: ixp4xx: Move NPE and QMGR to drivers/soc") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210721211412.3537004-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02soc/tegra: Make regulator couplers depend on CONFIG_REGULATORDmitry Osipenko1-2/+4
The regulator coupler drivers now use regulator-driver API function that isn't available during compile-testing. Make regulator coupler drivers dependent on CONFIG_REGULATOR in Kconfig. Fixes: 03978d42ed0d ("soc/tegra: regulators: Bump voltages on system reboot") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02Merge tag 'tegra-for-5.14-rc3-arm64-dt' of ↵Arnd Bergmann1-6/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.14-rc3 This contains one more fix for SMMU enablement on Tegra194, this time for PCIe. * tag 'tegra-for-5.14-rc3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable SMMU support for PCIe on Tegra194 Link: https://lore.kernel.org/r/20210716233858.10096-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02ARM: dts: nomadik: Fix up interrupt controller node namesSudeep Holla1-2/+2
Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org' Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-02mhi: Fix networking tree build.David S. Miller1-1/+6
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02spi: mediatek: Fix fifo transferGuenter Roeck1-14/+5
Commit 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") claims that fifo RX mode was never handled, and adds the presumably missing code to the FIFO transfer function. However, the claim that receive data was not handled is incorrect. It was handled as part of interrupt handling after the transfer was complete. The code added with the above mentioned commit reads data from the receive FIFO before the transfer is started, which is wrong. This results in an actual transfer error on a Hayato Chromebook. Remove the code trying to handle receive data before the transfer is started to fix the problem. Fixes: 3a70dd2d0503 ("spi: mediatek: fix fifo rx mode") Cc: Peter Hess <peter.hess@ph-home.de> Cc: Frank Wunderlich <frank-w@public-files.de> Cc: Tzung-Bi Shih <tzungbi@google.com> Cc: Hsin-Yi Wang <hsinyi@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Hsin-Yi Wang <hsinyi@google.com> Tested-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20210802030023.1748777-1-linux@roeck-us.net Signed-off-by: Mark Brown <broonie@kernel.org>
2021-08-02net/sched: taprio: Fix init procedureYannick Vignon1-2/+0
Commit 13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping") resulted in duplicate entries in the qdisc hash. While this did not impact the overall operation of the qdisc and taprio code paths, it did result in an infinite loop when dumping the qdisc properties, at least on one target (NXP LS1028 ARDB). Removing the duplicate call to qdisc_hash_add() solves the problem. Fixes: 13511704f8d759 ("net: taprio offload: enforce qdisc to netdev queue mapping") Signed-off-by: Yannick Vignon <yannick.vignon@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02interconnect: Fix undersized devress_alloc allocationColin Ian King1-1/+1
The expression sizeof(**ptr) for the void **ptr is just 1 rather than the size of a pointer. Fix this by using sizeof(*ptr). Addresses-Coverity: ("Wrong sizeof argument") Fixes: e145d9a184f2 ("interconnect: Add devm_of_icc_get() as exported API for users") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210730075408.19945-1-colin.king@canonical.com Signed-off-by: Georgi Djakov <djakov@kernel.org>
2021-08-02net, gro: Set inner transport header offset in tcp/udp GRO hookJakub Sitnicki2-0/+7
GSO expects inner transport header offset to be valid when skb->encapsulation flag is set. GSO uses this value to calculate the length of an individual segment of a GSO packet in skb_gso_transport_seglen(). However, tcp/udp gro_complete callbacks don't update the skb->inner_transport_header when processing an encapsulated TCP/UDP segment. As a result a GRO skb has ->inner_transport_header set to a value carried over from earlier skb processing. This can have mild to tragic consequences. From miscalculating the GSO segment length to triggering a page fault [1], when trying to read TCP/UDP header at an address past the skb->data page. The latter scenario leads to an oops report like so: BUG: unable to handle page fault for address: ffff9fa7ec00d008 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 123f201067 P4D 123f201067 PUD 123f209067 PMD 0 Oops: 0000 [#1] SMP NOPTI CPU: 44 PID: 0 Comm: swapper/44 Not tainted 5.4.53-cloudflare-2020.7.21 #1 Hardware name: HYVE EDGE-METAL-GEN10/HS-1811DLite1, BIOS V2.15 02/21/2020 RIP: 0010:skb_gso_transport_seglen+0x44/0xa0 Code: c0 41 83 e0 11 f6 87 81 00 00 00 20 74 30 0f b7 87 aa 00 00 00 0f [...] RSP: 0018:ffffad8640bacbb8 EFLAGS: 00010202 RAX: 000000000000feda RBX: ffff9fcc8d31bc00 RCX: ffff9fa7ec00cffc RDX: ffff9fa7ebffdec0 RSI: 000000000000feda RDI: 0000000000000122 RBP: 00000000000005c4 R08: 0000000000000001 R09: 0000000000000000 R10: ffff9fe588ae3800 R11: ffff9fe011fc92f0 R12: ffff9fcc8d31bc00 R13: ffff9fe0119d4300 R14: 00000000000005c4 R15: ffff9fba57d70900 FS: 0000000000000000(0000) GS:ffff9fe68df00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffff9fa7ec00d008 CR3: 0000003e99b1c000 CR4: 0000000000340ee0 Call Trace: <IRQ> skb_gso_validate_network_len+0x11/0x70 __ip_finish_output+0x109/0x1c0 ip_sublist_rcv_finish+0x57/0x70 ip_sublist_rcv+0x2aa/0x2d0 ? ip_rcv_finish_core.constprop.0+0x390/0x390 ip_list_rcv+0x12b/0x14f __netif_receive_skb_list_core+0x2a9/0x2d0 netif_receive_skb_list_internal+0x1b5/0x2e0 napi_complete_done+0x93/0x140 veth_poll+0xc0/0x19f [veth] ? mlx5e_napi_poll+0x221/0x610 [mlx5_core] net_rx_action+0x1f8/0x790 __do_softirq+0xe1/0x2bf irq_exit+0x8e/0xc0 do_IRQ+0x58/0xe0 common_interrupt+0xf/0xf </IRQ> The bug can be observed in a simple setup where we send IP/GRE/IP/TCP packets into a netns over a veth pair. Inside the netns, packets are forwarded to dummy device: trafgen -> [veth A]--[veth B] -forward-> [dummy] For veth B to GRO aggregate packets on receive, it needs to have an XDP program attached (for example, a trivial XDP_PASS). Additionally, for UDP, we need to enable GSO_UDP_L4 feature on the device: ip netns exec A ethtool -K AB rx-udp-gro-forwarding on The last component is an artificial delay to increase the chances of GRO batching happening: ip netns exec A tc qdisc add dev AB root \ netem delay 200us slot 5ms 10ms packets 2 bytes 64k With such a setup in place, the bug can be observed by tracing the skb outer and inner offsets when GSO skb is transmitted from the dummy device: tcp: FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE ip_finish_output dumB 2830 270 290 1 294 254 1383 (tcpv4,gre,) ^^^ udp: FUNC DEV SKB_LEN NH TH ENC INH ITH GSO_SIZE GSO_TYPE ip_finish_output dumB 2818 270 290 1 294 254 1383 (gre,udp_l4,) ^^^ Fix it by updating the inner transport header offset in tcp/udp gro_complete callbacks, similar to how {inet,ipv6}_gro_complete callbacks update the inner network header offset, when skb->encapsulation flag is set. [1] https://lore.kernel.org/netdev/CAKxSbF01cLpZem2GFaUaifh0S-5WYViZemTicAg7FCHOnh6kug@mail.gmail.com/ Fixes: bf296b125b21 ("tcp: Add GRO support") Fixes: f993bc25e519 ("net: core: handle encapsulation offloads when computing segment lengths") Fixes: e20cf8d3f1f7 ("udp: implement GRO for plain UDP sockets.") Reported-by: Alex Forster <aforster@cloudflare.com> Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02qede: fix crash in rmmod qede while automatic debug collectionPrabhakar Kushwaha2-0/+9
A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them. To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process. Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02ALSA: memalloc: Fix regression with SNDRV_DMA_TYPE_CONTINUOUSTakashi Iwai1-1/+1
The recent code refactoring made the mmap of continuous pages to be done via the own helper snd_dma_continuous_mmap() with remap_pfn_range(). There I overlooked that dmab->addr isn't set for the allocation with SNDRV_DMA_TYPE_CONTINUOUS. This resulted always in an error at mmap with this buffer type on the system such as Intel SST Baytrail driver. This patch fixes the regression by passing the correct address. Fixes: 30b7ba6972d5 ("ALSA: core: Add continuous and vmalloc mmap ops") Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/8d6674da-7d7b-803e-acc9-7de6cb1223fa@redhat.com Link: https://lore.kernel.org/r/20210801113801.31290-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-08-02dmaengine: imx-dma: configure the generic DMA type to make it workJuergen Borleis1-0/+2
Commit dea7a9fbb009 ("dmaengine: imx-dma: remove dma_slave_config direction usage") changes the method from a "configuration when called" to an "configuration when used". Due to this, only the cyclic DMA type gets configured correctly, while the generic DMA type is left non-configured. Without this additional call, the struct imxdma_channel::word_size member is stuck at DMA_SLAVE_BUSWIDTH_UNDEFINED and imxdma_prep_slave_sg() always returns NULL. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Fixes: dea7a9fbb009 ("dmaengine: imx-dma: remove dma_slave_config direction usage") Link: https://lore.kernel.org/r/20210729071821.9857-1-jbe@pengutronix.de Signed-off-by: Vinod Koul <vkoul@kernel.org>
2021-08-02Linux 5.14-rc4v5.14-rc4Linus Torvalds1-1/+1
2021-08-01Merge tag 'perf-tools-fixes-for-v5.14-2021-08-01' of ↵Linus Torvalds3-13/+42
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Revert "perf map: Fix dso->nsinfo refcounting", this makes 'perf top' abort, uncovering a design flaw on how namespace information is kept. The fix for that is more than we can do right now, leave it for the next merge window. - Split --dump-raw-trace by AUX records for ARM's CoreSight, fixing up the decoding of some records. - Fix PMU alias matching. Thanks to James Clark and John Garry for these fixes. * tag 'perf-tools-fixes-for-v5.14-2021-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: Revert "perf map: Fix dso->nsinfo refcounting" perf pmu: Fix alias matching perf cs-etm: Split --dump-raw-trace by AUX records
2021-08-01Merge tag 'powerpc-5.14-4' of ↵Linus Torvalds2-1/+8
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Don't use r30 in VDSO code, to avoid breaking existing Go lang programs. - Change an export symbol to allow non-GPL modules to use spinlocks again. Thanks to Paul Menzel, and Srikar Dronamraju. * tag 'powerpc-5.14-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: Don't use r30 to avoid breaking Go lang powerpc/pseries: Fix regression while building external modules
2021-08-01Merge tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds7-106/+244
Pull xfs fixes from Darrick Wong: "This contains a bunch of bug fixes in XFS. Dave and I have been busy the last couple of weeks to find and fix as many log recovery bugs as we can find; here are the results so far. Go fstests -g recoveryloop! ;) - Fix a number of coordination bugs relating to cache flushes for metadata writeback, cache flushes for multi-buffer log writes, and FUA writes for single-buffer log writes - Fix a bug with incorrect replay of attr3 blocks - Fix unnecessary stalls when flushing logs to disk - Fix spoofing problems when recovering realtime bitmap blocks" * tag 'xfs-5.14-fixes-2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: prevent spoofing of rtbitmap blocks when recovering buffers xfs: limit iclog tail updates xfs: need to see iclog flags in tracing xfs: Enforce attr3 buffer recovery order xfs: logging the on disk inode LSN can make it go backwards xfs: avoid unnecessary waits in xfs_log_force_lsn() xfs: log forces imply data device cache flushes xfs: factor out forced iclog flushes xfs: fix ordering violation between cache flushes and tail updates xfs: fold __xlog_state_release_iclog into xlog_state_release_iclog xfs: external logs need to flush data device xfs: flush data dev on external log write
2021-07-31Merge tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-2/+10
Pull cifs fixes from Steve French: "Three cifs/smb3 fixes, including two for stable, and a fix for an fallocate problem noticed by Clang" * tag '5.14-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: add missing parsing of backupuid smb3: rc uninitialized in one fallocate path SMB3: fix readpage for large swap cache
2021-07-31clk: fix leak on devm_clk_bulk_get_all() unwindBrian Norris1-1/+8
clk_bulk_get_all() allocates an array of struct clk_bulk data for us (unlike clk_bulk_get()), so we need to free it. Let's use the clk_bulk_put_all() helper. kmemleak complains, on an RK3399 Gru/Kevin system: unreferenced object 0xffffff80045def00 (size 128): comm "swapper/0", pid 1, jiffies 4294667682 (age 86.394s) hex dump (first 32 bytes): 44 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 D2`............. 48 32 60 fe fe ff ff ff 00 00 00 00 00 00 00 00 H2`............. backtrace: [<00000000742860d6>] __kmalloc+0x22c/0x39c [<00000000b0493f2c>] clk_bulk_get_all+0x64/0x188 [<00000000325f5900>] devm_clk_bulk_get_all+0x58/0xa8 [<00000000175b9bc5>] dwc3_probe+0x8ac/0xb5c [<000000009169e2f9>] platform_drv_probe+0x9c/0xbc [<000000005c51e2ee>] really_probe+0x13c/0x378 [<00000000c47b1f24>] driver_probe_device+0x84/0xc0 [<00000000f870fcfb>] __device_attach_driver+0x94/0xb0 [<000000004d1b92ae>] bus_for_each_drv+0x8c/0xd8 [<00000000481d60c3>] __device_attach+0xc4/0x150 [<00000000a163bd36>] device_initial_probe+0x1c/0x28 [<00000000accb6bad>] bus_probe_device+0x3c/0x9c [<000000001a199f89>] device_add+0x218/0x3cc [<000000001bd84952>] of_device_add+0x40/0x50 [<000000009c658c29>] of_platform_device_create_pdata+0xac/0x100 [<0000000021c69ba4>] of_platform_bus_create+0x190/0x224 Fixes: f08c2e2865f6 ("clk: add managed version of clk_bulk_get_all") Cc: Dong Aisheng <aisheng.dong@nxp.com> Cc: stable@vger.kernel.org Signed-off-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20210731025950.2238582-1-briannorris@chromium.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-07-31Merge tag 'net-5.14-rc4' of ↵Linus Torvalds104-547/+1230
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.14-rc4, including fixes from bpf, can, WiFi (mac80211) and netfilter trees. Current release - regressions: - mac80211: fix starting aggregation sessions on mesh interfaces Current release - new code bugs: - sctp: send pmtu probe only if packet loss in Search Complete state - bnxt_en: add missing periodic PHC overflow check - devlink: fix phys_port_name of virtual port and merge error - hns3: change the method of obtaining default ptp cycle - can: mcba_usb_start(): add missing urb->transfer_dma initialization Previous releases - regressions: - set true network header for ECN decapsulation - mlx5e: RX, avoid possible data corruption w/ relaxed ordering and LRO - phy: re-add check for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54811 PHY - sctp: fix return value check in __sctp_rcv_asconf_lookup Previous releases - always broken: - bpf: - more spectre corner case fixes, introduce a BPF nospec instruction for mitigating Spectre v4 - fix OOB read when printing XDP link fdinfo - sockmap: fix cleanup related races - mac80211: fix enabling 4-address mode on a sta vif after assoc - can: - raw: raw_setsockopt(): fix raw_rcv panic for sock UAF - j1939: j1939_session_deactivate(): clarify lifetime of session object, avoid UAF - fix number of identical memory leaks in USB drivers - tipc: - do not blindly write skb_shinfo frags when doing decryption - fix sleeping in tipc accept routine" * tag 'net-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (91 commits) gve: Update MAINTAINERS list can: esd_usb2: fix memory leak can: ems_usb: fix memory leak can: usb_8dev: fix memory leak can: mcba_usb_start(): add missing urb->transfer_dma initialization can: hi311x: fix a signedness bug in hi3110_cmd() MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver bpf: Fix leakage due to insufficient speculative store bypass mitigation bpf: Introduce BPF nospec instruction for mitigating Spectre v4 sis900: Fix missing pci_disable_device() in probe and remove net: let flow have same hash in two directions nfc: nfcsim: fix use after free during module unload tulip: windbond-840: Fix missing pci_disable_device() in probe and remove sctp: fix return value check in __sctp_rcv_asconf_lookup nfc: s3fwrn5: fix undefined parameter values in dev_err() net/mlx5: Fix mlx5_vport_tbl_attr chain from u16 to u32 net/mlx5e: Fix nullptr in mlx5e_hairpin_get_mdev() net/mlx5: Unload device upon firmware fatal error net/mlx5e: Fix page allocation failure for ptp-RQ over SF net/mlx5e: Fix page allocation failure for trap-RQ over SF ...
2021-07-31Merge tag 'acpi-5.14-rc4' of ↵Linus Torvalds3-18/+52
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These revert a recent IRQ resources handling modification that turned out to be problematic, fix suspend-to-idle handling on AMD platforms to take upcoming systems into account properly and fix the retrieval of the DPTF attributes of the PCH FIVR. Specifics: - Revert recent change of the ACPI IRQ resources handling that attempted to improve the ACPI IRQ override selection logic, but introduced serious regressions on some systems (Hui Wang). - Fix up quirks for AMD platforms in the suspend-to-idle support code so as to take upcoming systems using uPEP HID AMDI007 into account as appropriate (Mario Limonciello). - Fix the code retrieving DPTF attributes of the PCH FIVR so that it agrees on the return data type with the ACPI control method evaluated for this purpose (Srinivas Pandruvada)" * tag 'acpi-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: DPTF: Fix reading of attributes Revert "ACPI: resources: Add checks for ACPI IRQ override" ACPI: PM: Add support for upcoming AMD uPEP HID AMDI007
2021-07-31tracing: Fix NULL pointer dereference in start_creatingKamal Agrawal1-1/+3
The event_trace_add_tracer() can fail. In this case, it leads to a crash in start_creating with below call stack. Handle the error scenario properly in trace_array_create_dir. Call trace: down_write+0x7c/0x204 start_creating.25017+0x6c/0x194 tracefs_create_file+0xc4/0x2b4 init_tracer_tracefs+0x5c/0x940 trace_array_create_dir+0x58/0xb4 trace_array_create+0x1bc/0x2b8 trace_array_get_by_name+0xdc/0x18c Link: https://lkml.kernel.org/r/1627651386-21315-1-git-send-email-kamaagra@codeaurora.org Cc: stable@vger.kernel.org Fixes: 4114fbfd02f1 ("tracing: Enable creating new instance early boot") Signed-off-by: Kamal Agrawal <kamaagra@codeaurora.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2021-07-31pipe: make pipe writes always wake up readersLinus Torvalds1-5/+5
Since commit 1b6b26ae7053 ("pipe: fix and clarify pipe write wakeup logic") we have sanitized the pipe write logic, and would only try to wake up readers if they needed it. In particular, if the pipe already had data in it before the write, there was no point in trying to wake up a reader, since any existing readers must have been aware of the pre-existing data already. Doing extraneous wakeups will only cause potential thundering herd problems. However, it turns out that some Android libraries have misused the EPOLL interface, and expected "edge triggered" be to "any new write will trigger it". Even if there was no edge in sight. Quoting Sandeep Patil: "The commit 1b6b26ae7053 ('pipe: fix and clarify pipe write wakeup logic') changed pipe write logic to wakeup readers only if the pipe was empty at the time of write. However, there are libraries that relied upon the older behavior for notification scheme similar to what's described in [1] One such library 'realm-core'[2] is used by numerous Android applications. The library uses a similar notification mechanism as GNU Make but it never drains the pipe until it is full. When Android moved to v5.10 kernel, all applications using this library stopped working. The library has since been fixed[3] but it will be a while before all applications incorporate the updated library" Our regression rule for the kernel is that if applications break from new behavior, it's a regression, even if it was because the application did something patently wrong. Also note the original report [4] by Michal Kerrisk about a test for this epoll behavior - but at that point we didn't know of any actual broken use case. So add the extraneous wakeup, to approximate the old behavior. [ I say "approximate", because the exact old behavior was to do a wakeup not for each write(), but for each pipe buffer chunk that was filled in. The behavior introduced by this change is not that - this is just "every write will cause a wakeup, whether necessary or not", which seems to be sufficient for the broken library use. ] It's worth noting that this adds the extraneous wakeup only for the write side, while the read side still considers the "edge" to be purely about reading enough from the pipe to allow further writes. See commit f467a6a66419 ("pipe: fix and clarify pipe read wakeup logic") for the pipe read case, which remains that "only wake up if the pipe was full, and we read something from it". Link: https://lore.kernel.org/lkml/CAHk-=wjeG0q1vgzu4iJhW5juPkTsjTYmiqiMUYAebWW+0bam6w@mail.gmail.com/ [1] Link: https://github.com/realm/realm-core [2] Link: https://github.com/realm/realm-core/issues/4666 [3] Link: https://lore.kernel.org/lkml/CAKgNAkjMBGeAwF=2MKK758BhxvW58wYTgYKB2V-gY1PwXxrH+Q@mail.gmail.com/ [4] Link: https://lore.kernel.org/lkml/20210729222635.2937453-1-sspatil@android.com/ Reported-by: Sandeep Patil <sspatil@android.com> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-31Revert "perf map: Fix dso->nsinfo refcounting"Arnaldo Carvalho de Melo1-2/+0
This makes 'perf top' abort in some cases, and the right fix will involve surgery that is too much to do at this stage, so revert for now and fix it in the next merge window. This reverts commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5. Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Krister Johansen <kjlx@templeofstupid.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-07-30Merge branches 'acpi-resources' and 'acpi-dptf'Rafael J. Wysocki2-16/+44
* acpi-resources: Revert "ACPI: resources: Add checks for ACPI IRQ override" * acpi-dptf: ACPI: DPTF: Fix reading of attributes
2021-07-30ALSA: pcm - fix mmap capability check for the snd-dummy driverJaroslav Kysela1-1/+1
The snd-dummy driver (fake_buffer configuration) uses the ops->page callback for the mmap operations. Allow mmap for this case, too. Cc: <stable@vger.kernel.org> Fixes: c4824ae7db41 ("ALSA: pcm: Fix mmap capability check") Signed-off-by: Jaroslav Kysela <perex@perex.cz> Link: https://lore.kernel.org/r/20210730090254.612478-1-perex@perex.cz Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-07-30Merge tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-blockLinus Torvalds5-51/+110
Pull block fixes from Jens Axboe: - gendisk freeing fix (Christoph) - blk-iocost wake ordering fix (Tejun) - tag allocation error handling fix (John) - loop locking fix. While this isn't the prettiest fix in the world, nobody has any good alternatives for 5.14. Something to likely revisit for 5.15. (Tetsuo) * tag 'block-5.14-2021-07-30' of git://git.kernel.dk/linux-block: block: delay freeing the gendisk blk-iocost: fix operation ordering in iocg_wake_fn() blk-mq-sched: Fix blk_mq_sched_alloc_tags() error handling loop: reintroduce global lock for safe loop_validate_file() traversal
2021-07-30Merge tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-blockLinus Torvalds1-8/+32
Pull io_uring fixes from Jens Axboe: - A fix for block backed reissue (me) - Reissue context hardening (me) - Async link locking fix (Pavel) * tag 'io_uring-5.14-2021-07-30' of git://git.kernel.dk/linux-block: io_uring: fix poll requests leaking second poll entries io_uring: don't block level reissue off completion path io_uring: always reissue from task_work context io_uring: fix race in unified task_work running io_uring: fix io_prep_async_link locking
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 12:00:42 +0300