summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-06-04regulator: max77686: Fix checkpatch warningsAxel Lin1-6/+7
Fix below checkpatch warnings: $ scripts/checkpatch.pl -f drivers/regulator/max77686.c ERROR: return is not a function, parentheses are not required + return (DIV_ROUND_UP(rdev->desc->uV_step WARNING: line over 80 characters + .ops = &max77686_buck_dvs_ops, \ total: 1 errors, 1 warnings, 339 lines checked Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: max1586: Convert max1586_v6_ops to set_voltage_selAxel Lin1-22/+5
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: max1586: Convert max1586_v6_ops to regulator_list_voltage_tableAxel Lin1-23/+12
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-04regulator: wm8350: Convert LDOs to set_voltage_sel()Mark Brown1-30/+8
Since there are two linear ranges for the LDO voltages provide a voltage mapping function and then use regulator_set_voltage_sel_regmap(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: max77686: Use regulator_map_voltage_linear for simple linear mappingsAxel Lin1-0/+2
Both max77686_ops and max77686_buck_dvs_ops use simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the defult regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Use regulator_map_voltage_linear for wm8350_dcdc_opsAxel Lin1-0/+1
wm8350_dcdc_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: Change db8500-prcmu match names to reflect Device TreeLee Jones1-20/+20
The 'name' field in 'struct of_regulator_match' expects to match with its corresponding regulator device node in the Device Tree. This patch renames each of the regulators in the db8500-prcum regulator driver so this is true. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: Change ab8500 match names to reflect Device TreeLee Jones1-11/+11
The 'name' field in 'struct of_regulator_match' expects to match with its corresponding regulator device node in the Device Tree. This patch renames each of the regulators in the ab8500 regulator driver so this is true. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: fixed: Use of_match_ptr() for of_match_table entryAxel Lin1-3/+1
Use the new of_match_ptr() macro for the of_match_table pointer entry to avoid having to #define match NULL. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: MAX77686: Add Maxim 77686 regulator driverJonghwa Lee3-0/+346
Add driver for support max77686 regulator. MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the volatege of regulator on max77686 chip with using regmap. Signed-off-by: Chiwoong Byun <woong.byun@samsung.com> Signed-off-by: Jonghwa Lee <jonghwa3.lee@samsung.com> Signed-off-by: Myungjoo Ham <myungjoo.ham@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Yadwinder Singh Brar <yadi.brar@samsung.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8400: Use regulator_map_voltage_linear for wm8400_dcdc_opsAxel Lin1-0/+1
wm8400_dcdc_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm831x-ldo: Use regulator_map_voltage_linear for wm831x_alive_ldo_opsAxel Lin1-0/+1
wm831x_alive_ldo_ops uses simple linear voltage maps. Thus use regulator_map_voltage_linear is more efficient than using the default regulator_map_voltage_iterate. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8994: Convert wm8994_ldo1_ops to ↵Axel Lin1-10/+4
regulator_[list|map]_voltage_linear Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: anatop: Convert to regulator_list_voltage_linear()Axel Lin1-12/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: palmas: Use regulator_[list|map]_voltage_linear() for ↵Axel Lin1-7/+4
palmas_ops_smps10 Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Convert DCDCs to set_voltage_sel() and linear voltagesMark Brown1-56/+8
The WM8350 DCDCs have a simple linear mapping from selectors to voltages so can be converted very simply to use the new infrastructure for a nice reduction in code size. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Convert to core regmap-based enable operationsMark Brown1-92/+29
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: wm8350: Convert to use core regmap vsel readbackMark Brown1-56/+19
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: ab8500: Let regulator core handle the case no delay for setting ↵Axel Lin1-7/+0
new voltage if regulator is off Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: lp3971: Use regulator_list_voltage_table()Axel Lin1-43/+23
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: tps6507x: Use regulator_list_voltage_table()Axel Lin1-57/+43
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: tps6105x: Use regulator_list_voltage_table()Axel Lin1-11/+3
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: lp3972: Use regulator_list_voltage_table()Axel Lin1-66/+36
Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: ab8500: Use regulator_list_voltage_table()Axel Lin1-40/+24
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: ab3100: Use regulator_list_voltage_table()Axel Lin1-36/+14
Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: core: Use dev_get_regmap() to find the regmapMark Brown1-1/+4
If no regmap is explicitly specified then use dev_get_regmap() to obtain one. The driver must explicitly enable any actual usage of the regmap so there's no concern with unwanted usage. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-03regulator: Use newly added devres_release() rather than open codingMark Brown1-1/+1
devres_release() will call the destructor for the resource as well as freeing the devres data. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@ti.com>
2012-06-03regulator: core: Call set_voltage_time_sel() only when the regulator is onAxel Lin1-2/+3
If the regulator is not on, it won't take time setting new voltage. So only call set_voltage_time_sel() to get the necessary delay when the regulator is on. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03regulator: core: Allow drivers to set voltage mapping table in regulator_descAxel Lin2-0/+30
Some regulator hardware use table based mapping can set volt_table in regulator_desc and use regulator_list_voltage_table() for their list_voltage callback. Signed-off-by: Axel Lin <axel.lin@gmail.com> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2012-06-03Linux 3.5-rc1v3.5-rc1Linus Torvalds1-2/+2
2012-06-03Merge tag 'dm-3.5-changes-1' of ↵Linus Torvalds6-90/+322
git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm Pull device-mapper updates from Alasdair G Kergon: "Improve multipath's retrying mechanism in some defined circumstances and provide a simple reserve/release mechanism for userspace tools to access thin provisioning metadata while the pool is in use." * tag 'dm-3.5-changes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-dm: dm thin: provide userspace access to pool metadata dm thin: use slab mempools dm mpath: allow ioctls to trigger pg init dm mpath: delay retry of bypassed pg dm mpath: reduce size of struct multipath
2012-06-03dm thin: provide userspace access to pool metadataJoe Thornber5-11/+193
This patch implements two new messages that can be sent to the thin pool target allowing it to take a snapshot of the _metadata_. This, read-only snapshot can be accessed by userland, concurrently with the live target. Only one metadata snapshot can be held at a time. The pool's status line will give the block location for the current msnap. Since version 0.1.5 of the userland thin provisioning tools, the thin_dump program displays the msnap as follows: thin_dump -m <msnap root> <metadata dev> Available here: https://github.com/jthornber/thin-provisioning-tools Now that userland can access the metadata we can do various things that have traditionally been kernel side tasks: i) Incremental backups. By using metadata snapshots we can work out what blocks have changed over time. Combined with data snapshots we can ensure the data doesn't change while we back it up. A short proof of concept script can be found here: https://github.com/jthornber/thinp-test-suite/blob/master/incremental_backup_example.rb ii) Migration of thin devices from one pool to another. iii) Merging snapshots back into an external origin. iv) Asyncronous replication. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm thin: use slab mempoolsMike Snitzer1-62/+99
Use dedicated caches prefixed with a "dm_" name rather than relying on kmalloc mempools backed by generic slab caches so the memory usage of thin provisioning (and any leaks) can be accounted for independently. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: allow ioctls to trigger pg initMikulas Patocka1-9/+17
After the failure of a group of paths, any alternative paths that need initialising do not become available until further I/O is sent to the device. Until this has happened, ioctls return -EAGAIN. With this patch, new paths are made available in response to an ioctl too. The processing of the ioctl gets delayed until this has happened. Instead of returning an error, we submit a work item to kmultipathd (that will potentially activate the new path) and retry in ten milliseconds. Note that the patch doesn't retry an ioctl if the ioctl itself fails due to a path failure. Such retries should be handled intelligently by the code that generated the ioctl in the first place, noting that some SCSI commands should not be retried because they are not idempotent (XOR write commands). For commands that could be retried, there is a danger that if the device rejected the SCSI command, the path could be errorneously marked as failed, and the request would be retried on another path which might fail too. It can be determined if the failure happens on the device or on the SCSI controller, but there is no guarantee that all SCSI drivers set these flags correctly. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: delay retry of bypassed pgMike Christie1-2/+6
If I/O needs retrying and only bypassed priority groups are available, set the pg_init_delay_retry flag to wait before retrying. If, for example, the reason for the bypass is that the controller is getting reset or there is a firmware upgrade happening, retrying right away would cause a flood of log messages and retries for what could be a few seconds or even several minutes. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03dm mpath: reduce size of struct multipathMike Snitzer1-6/+7
Move multipath structure's 'lock' and 'queue_size' members to eliminate two 4-byte holes. Also use a bit within a single unsigned int for each existing flag (saves 8-bytes). This allows future flags to be added without each consuming an unsigned int. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2012-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds21-84/+201
Pull networking updates from David Miller: 1) Make syn floods consume significantly less resources by a) Not pre-COW'ing routing metrics for SYN/ACKs b) Mirroring the device queue mapping of the SYN for the SYN/ACK reply. Both from Eric Dumazet. 2) Fix calculation errors in Byte Queue Limiting, from Hiroaki SHIMODA. 3) Validate the length requested when building a paged SKB for a socket, so we don't overrun the page vector accidently. From Jason Wang. 4) When netlabel is disabled, we abort all IP option processing when we see a CIPSO option. This isn't the right thing to do, we should simply skip over it and continue processing the remaining options (if any). Fix from Paul Moore. 5) SRIOV fixes for the mellanox driver from Jack orgenstein and Marcel Apfelbaum. 6) 8139cp enables the receiver before the ring address is properly programmed, which potentially lets the device crap over random memory. Fix from Jason Wang. 7) e1000/e1000e fixes for i217 RST handling, and an improper buffer address reference in jumbo RX frame processing from Bruce Allan and Sebastian Andrzej Siewior, respectively. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: fec_mpc52xx: fix timestamp filtering mcs7830: Implement link state detection e1000e: fix Rapid Start Technology support for i217 e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats() r8169: call netif_napi_del at errpaths and at driver unload tcp: reflect SYN queue_mapping into SYNACK packets tcp: do not create inetpeer on SYNACK message 8139cp/8139too: terminate the eeprom access with the right opmode 8139cp: set ring address before enabling receiver cipso: handle CIPSO options correctly when NetLabel is disabled net: sock: validate data_len before allocating skb in sock_alloc_send_pskb() bql: Avoid possible inconsistent calculation. bql: Avoid unneeded limit decrement. bql: Fix POSDIFF() to integer overflow aware. net/mlx4_core: Fix obscure mlx4_cmd_box parameter in QUERY_DEV_CAP net/mlx4_core: Check port out-of-range before using in mlx4_slave_cap net/mlx4_core: Fixes for VF / Guest startup flow net/mlx4_en: Fix improper use of "port" parameter in mlx4_en_event net/mlx4_core: Fix number of EQs used in ICM initialisation net/mlx4_core: Fix the slave_id out-of-range test in mlx4_eq_int
2012-06-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds11-39/+297
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull straggler x86 fixes from Peter Anvin: "Three groups of patches: - EFI boot stub documentation and the ability to print error messages; - Removal for PTRACE_ARCH_PRCTL for x32 (obsolete interface which should never have been ported, and the port is broken and potentially dangerous.) - ftrace stack corruption fixes. I'm not super-happy about the technical implementation, but it is probably the least invasive in the short term. In the future I would like a single method for nesting the debug stack, however." * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, x32, ptrace: Remove PTRACE_ARCH_PRCTL for x32 x86, efi: Add EFI boot stub documentation x86, efi; Add EFI boot stub console support x86, efi: Only close open files in error path ftrace/x86: Do not change stacks in DEBUG when calling lockdep x86: Allow nesting of the debug stack IDT setting x86: Reset the debug_stack update counter ftrace: Use breakpoint method to update ftrace caller ftrace: Synchronize variable setting with breakpoints
2012-06-03tty: Revert the tty locking series, it needs more workLinus Torvalds14-191/+119
This reverts the tty layer change to use per-tty locking, because it's not correct yet, and fixing it will require some more deep surgery. The main revert is d29f3ef39be4 ("tty_lock: Localise the lock"), but there are several smaller commits that built upon it, they also get reverted here. The list of reverted commits is: fde86d310886 - tty: add lockdep annotations 8f6576ad476b - tty: fix ldisc lock inversion trace d3ca8b64b97e - pty: Fix lock inversion b1d679afd766 - tty: drop the pty lock during hangup abcefe5fc357 - tty/amiserial: Add missing argument for tty_unlock() fd11b42e3598 - cris: fix missing tty arg in wait_event_interruptible_tty call d29f3ef39be4 - tty_lock: Localise the lock The revert had a trivial conflict in the 68360serial.c staging driver that got removed in the meantime. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-03fec_mpc52xx: fix timestamp filteringStephan Gatzka1-1/+1
skb_defer_rx_timestamp was called with a freshly allocated skb but must be called with rskb instead. Signed-off-by: Stephan Gatzka <stephan@gatzka.org> Cc: stable <stable@vger.kernel.org> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-03mcs7830: Implement link state detectionOndrej Zary1-2/+23
Add .status callback that detects link state changes. Tested with MCS7832CV-AA chip (9710:7830, identified as rev.C by the driver). Fixes https://bugzilla.kernel.org/show_bug.cgi?id=28532 Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-02Merge 'for-linus' branches from ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/{vfs,signal} Pull vfs fix and a fix from the signal changes for frv from Al Viro. The __kernel_nlink_t for powerpc got scrogged because 64-bit powerpc actually depended on the default "unsigned long", while 32-bit powerpc had an explicit override to "unsigned short". Al didn't notice, and made both of them be the unsigned short. The frv signal fix is fallout from simplifying the do_notify_resume() code, and leaving an extra parenthesis. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: powerpc: Fix size of st_nlink on 64bit * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/signal: frv: Remove bogus closing parenthesis
2012-06-02powerpc: Fix size of st_nlink on 64bitAnton Blanchard1-1/+1
commit e57f93cc53b7 (powerpc: get rid of nlink_t uses, switch to explicitly-sized type) changed the size of st_nlink on ppc64 from a long to a short, resulting in boot failures. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-02frv: Remove bogus closing parenthesisGeert Uytterhoeven1-1/+1
Introduced by commit 6fd84c0831ec78d98736b76dc5e9b849f1dbfc9e ("TIF_RESTORE_SIGMASK can be set only when TIF_SIGPENDING is set") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-06-02e1000e: fix Rapid Start Technology support for i217Bruce Allan1-9/+9
The definition of I217_PROXY_CTRL must use the BM_PHY_REG() macro instead of the PHY_REG() macro for PHY page 800 register 70 since it is for a PHY register greater than the maximum allowed by the latter macro, and fix a typo setting the I217_MEMPWR register in e1000_suspend_workarounds_ich8lan. Also for clarity, rename a few defines as bit definitions instead of masks. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-02e1000: look into the page instead of skb->data for e1000_tbi_adjust_stats()Sebastian Andrzej Siewior1-1/+1
This is another fixup where the data is not transfered into buffer addressed by skb->data but into a page. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-02Merge branch 'akpm' (Fixups for Andrew's patchbomb)Linus Torvalds13-45/+33
Merge fixups for the mac NLS tables from Andrew. * emailed from Andrew Morton, and one cleanup by me: nls: fix (and rename) mac NLS table files and config options fs/nls/Makefile: remove bogus CONFIG_ assignments
2012-06-02nls: fix (and rename) mac NLS table files and config optionsLinus Torvalds13-33/+33
The config options in the Kconfig file (with _CODEPAGE_ in the name) didn't match the config option name in the Makefile (no _CODEPAGE_). And both of them were of the hard-to-read MACXYZZY variety, which made them hard to parse for normal humans: MACROMAN easily reads as "macro man", not as "Mac Roman". So rename the options to be consistent, and be NLS_MAC_xyzzy. Rename the files to be mac-xyzzy.c too, and drop the "nls" part entirely (it's already in the directory name). Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-02fs/nls/Makefile: remove bogus CONFIG_ assignmentsAndrew Morton1-12/+0
These were debug things which snuck through. Reported-by: Yinghai Lu <yinghai@kernel.org> Cc: Vladimir Serbinenko <phcoder@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-02Merge tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6Linus Torvalds94-2155/+5467
Pull fbdev updates from Florian Tobias Schandinat: - driver for AUO-K1900 and AUO-K1901 epaper controller - large updates for OMAP (e.g. decouple HDMI audio and video) - some updates for Exynos and SH Mobile - various other small fixes and cleanups * tag 'fbdev-updates-for-3.5' of git://github.com/schandinat/linux-2.6: (130 commits) video: bfin_adv7393fb: Fix cleanup code video: exynos_dp: reduce delay time when configuring video setting video: exynos_dp: move sw reset prioir to enabling sw defined function video: exynos_dp: use devm_ functions fb: handle NULL pointers in framebuffer release OMAPDSS: HDMI: OMAP4: Update IRQ flags for the HPD IRQ request OMAPDSS: Apply VENC timings even if panel is disabled OMAPDSS: VENC/DISPC: Delay dividing Y resolution for managers connected to VENC OMAPDSS: DISPC: Support rotation through TILER OMAPDSS: VRFB: remove compiler warnings when CONFIG_BUG=n OMAPFB: remove compiler warnings when CONFIG_BUG=n OMAPDSS: remove compiler warnings when CONFIG_BUG=n OMAPDSS: DISPC: fix usage of dispc_ovl_set_accu_uv OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays OMAPDSS: DSI: Support command mode interleaving during video mode blanking periods OMAPDSS: DISPC: Update Accumulator configuration for chroma plane drivers/video: fsl-diu-fb: don't initialize the THRESHOLDS registers video: exynos mipi dsi: support reverse panel type video: exynos mipi dsi: Properly interpret the interrupt source flags video: exynos mipi dsi: Avoid races in probe() ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-14 12:40:25 +0300