summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-09-04net: xilinx: axienet: Always disable promiscuous modeSean Anderson1-0/+4
[ Upstream commit 4ae738dfef2c0323752ab81786e2d298c9939321 ] If promiscuous mode is disabled when there are fewer than four multicast addresses, then it will not be reflected in the hardware. Fix this by always clearing the promiscuous mode flag even when we program multicast addresses. Fixes: 8a3b7a252dca ("drivers/net/ethernet/xilinx: added Xilinx AXI Ethernet driver") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240822154059.1066595-2-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04ipv6: prevent UAF in ip6_send_skb()Eric Dumazet1-0/+2
[ Upstream commit faa389b2fbaaec7fd27a390b4896139f9da662e3 ] syzbot reported an UAF in ip6_send_skb() [1] After ip6_local_out() has returned, we no longer can safely dereference rt, unless we hold rcu_read_lock(). A similar issue has been fixed in commit a688caa34beb ("ipv6: take rcu lock in rawv6_send_hdrinc()") Another potential issue in ip6_finish_output2() is handled in a separate patch. [1] BUG: KASAN: slab-use-after-free in ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 Read of size 8 at addr ffff88806dde4858 by task syz.1.380/6530 CPU: 1 UID: 0 PID: 6530 Comm: syz.1.380 Not tainted 6.11.0-rc3-syzkaller-00306-gdf6cbc62cc9b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 kasan_report+0x143/0x180 mm/kasan/report.c:601 ip6_send_skb+0x18d/0x230 net/ipv6/ip6_output.c:1964 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 vfs_writev+0x37c/0xbb0 fs/read_write.c:971 do_writev+0x1b1/0x350 fs/read_write.c:1018 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f936bf79e79 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 a8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f936cd7f038 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 00007f936c115f80 RCX: 00007f936bf79e79 RDX: 0000000000000001 RSI: 0000000020000040 RDI: 0000000000000004 RBP: 00007f936bfe7916 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 00007f936c115f80 R15: 00007fff2860a7a8 </TASK> Allocated by task 6530: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 unpoison_slab_object mm/kasan/common.c:312 [inline] __kasan_slab_alloc+0x66/0x80 mm/kasan/common.c:338 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3988 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_noprof+0x135/0x2a0 mm/slub.c:4044 dst_alloc+0x12b/0x190 net/core/dst.c:89 ip6_blackhole_route+0x59/0x340 net/ipv6/route.c:2670 make_blackhole net/xfrm/xfrm_policy.c:3120 [inline] xfrm_lookup_route+0xd1/0x1c0 net/xfrm/xfrm_policy.c:3313 ip6_dst_lookup_flow+0x13e/0x180 net/ipv6/ip6_output.c:1257 rawv6_sendmsg+0x1283/0x23c0 net/ipv6/raw.c:898 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2680 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 45: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2252 [inline] slab_free mm/slub.c:4473 [inline] kmem_cache_free+0x145/0x350 mm/slub.c:4548 dst_destroy+0x2ac/0x460 net/core/dst.c:124 rcu_do_batch kernel/rcu/tree.c:2569 [inline] rcu_core+0xafd/0x1830 kernel/rcu/tree.c:2843 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 __do_softirq kernel/softirq.c:588 [inline] invoke_softirq kernel/softirq.c:428 [inline] __irq_exit_rcu+0xf4/0x1c0 kernel/softirq.c:637 irq_exit_rcu+0x9/0x30 kernel/softirq.c:649 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1043 [inline] sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1043 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702 Last potentially related work creation: kasan_save_stack+0x3f/0x60 mm/kasan/common.c:47 __kasan_record_aux_stack+0xac/0xc0 mm/kasan/generic.c:541 __call_rcu_common kernel/rcu/tree.c:3106 [inline] call_rcu+0x167/0xa70 kernel/rcu/tree.c:3210 refdst_drop include/net/dst.h:263 [inline] skb_dst_drop include/net/dst.h:275 [inline] nf_ct_frag6_queue net/ipv6/netfilter/nf_conntrack_reasm.c:306 [inline] nf_ct_frag6_gather+0xb9a/0x2080 net/ipv6/netfilter/nf_conntrack_reasm.c:485 ipv6_defrag+0x2c8/0x3c0 net/ipv6/netfilter/nf_defrag_ipv6_hooks.c:67 nf_hook_entry_hookfn include/linux/netfilter.h:154 [inline] nf_hook_slow+0xc3/0x220 net/netfilter/core.c:626 nf_hook include/linux/netfilter.h:269 [inline] __ip6_local_out+0x6fa/0x800 net/ipv6/output_core.c:143 ip6_local_out+0x26/0x70 net/ipv6/output_core.c:153 ip6_send_skb+0x112/0x230 net/ipv6/ip6_output.c:1959 rawv6_push_pending_frames+0x75c/0x9e0 net/ipv6/raw.c:588 rawv6_sendmsg+0x19c7/0x23c0 net/ipv6/raw.c:926 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 do_iter_readv_writev+0x60a/0x890 Fixes: 0625491493d9 ("ipv6: ip6_push_pending_frames() should increment IPSTATS_MIB_OUTDISCARDS") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://patch.msgid.link/20240820160859.3786976-2-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04netem: fix return value if duplicate enqueue failsStephen Hemminger1-18/+29
[ Upstream commit c07ff8592d57ed258afee5a5e04991a48dbaf382 ] There is a bug in netem_enqueue() introduced by commit 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") that can lead to a use-after-free. This commit made netem_enqueue() always return NET_XMIT_SUCCESS when a packet is duplicated, which can cause the parent qdisc's q.qlen to be mistakenly incremented. When this happens qlen_notify() may be skipped on the parent during destruction, leaving a dangling pointer for some classful qdiscs like DRR. There are two ways for the bug happen: - If the duplicated packet is dropped by rootq->enqueue() and then the original packet is also dropped. - If rootq->enqueue() sends the duplicated packet to a different qdisc and the original packet is dropped. In both cases NET_XMIT_SUCCESS is returned even though no packets are enqueued at the netem qdisc. The fix is to defer the enqueue of the duplicate packet until after the original packet has been guaranteed to return NET_XMIT_SUCCESS. Fixes: 5845f706388a ("net: netem: fix skb length BUG_ON in __skb_to_sgvec") Reported-by: Budimir Markovic <markovicbudimir@gmail.com> Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240819175753.5151-1-stephen@networkplumber.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04net: dsa: mv88e6xxx: Fix out-of-bound accessJoseph Huang1-1/+2
[ Upstream commit 528876d867a23b5198022baf2e388052ca67c952 ] If an ATU violation was caused by a CPU Load operation, the SPID could be larger than DSA_MAX_PORTS (the size of mv88e6xxx_chip.ports[] array). Fixes: 75c05a74e745 ("net: dsa: mv88e6xxx: Fix counting of ATU violations") Signed-off-by: Joseph Huang <Joseph.Huang@garmin.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20240819235251.1331763-1-Joseph.Huang@garmin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04net: dsa: mv88e6xxx: replace ATU violation prints with trace pointsVladimir Oltean4-9/+86
[ Upstream commit 8646384d80f3d3b4a66b3284dbbd8232d1b8799e ] In applications where the switch ports must perform 802.1X based authentication and are therefore locked, ATU violation interrupts are quite to be expected as part of normal operation. The problem is that they currently spam the kernel log, even if rate limited. Create a series of trace points, all derived from the same event class, which log these violations to the kernel's trace buffer, which is both much faster and much easier to ignore than printing to a serial console. New usage model: $ trace-cmd list | grep mv88e6xxx mv88e6xxx mv88e6xxx:mv88e6xxx_atu_full_violation mv88e6xxx:mv88e6xxx_atu_miss_violation mv88e6xxx:mv88e6xxx_atu_member_violation $ trace-cmd record -e mv88e6xxx sleep 10 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Saeed Mahameed <saeed@kernel.org> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 528876d867a2 ("net: dsa: mv88e6xxx: Fix out-of-bound access") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04net: dsa: mv88e6xxx: read FID when handling ATU violationsHans J. Schultz1-11/+61
[ Upstream commit 4bf24ad09bc0b05e97fb48b962b2c9246fc76727 ] When an ATU violation occurs, the switch uses the ATU FID register to report the FID of the MAC address that incurred the violation. It would be good for the driver to know the FID value for purposes such as logging and CPU-based authentication. Up until now, the driver has been calling the mv88e6xxx_g1_atu_op() function to read ATU violations, but that doesn't do exactly what we want, namely it calls mv88e6xxx_g1_atu_fid_write() with FID 0. (side note, the documentation for the ATU Get/Clear Violation command says that writes to the ATU FID register have no effect before the operation starts, it's only that we disregard the value that this register provides once the operation completes) So mv88e6xxx_g1_atu_fid_write() is not what we want, but rather mv88e6xxx_g1_atu_fid_read(). However, the latter doesn't exist, we need to write it. The remainder of mv88e6xxx_g1_atu_op() except for mv88e6xxx_g1_atu_fid_write() is still needed, namely to send a GET_CLR_VIOLATION command to the ATU. In principle we could have still kept calling mv88e6xxx_g1_atu_op(), but the MDIO writes to the ATU FID register are pointless, but in the interest of doing less CPU work per interrupt, write a new function called mv88e6xxx_g1_read_atu_violation() and call it. The FID will be the port default FID as set by mv88e6xxx_port_set_fid() if the VID from the packet cannot be found in the VTU. Otherwise it is the FID derived from the VTU entry associated with that VID. Signed-off-by: Hans J. Schultz <netdev@kapio-technology.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 528876d867a2 ("net: dsa: mv88e6xxx: Fix out-of-bound access") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04ice: fix ICE_LAST_OFFSET formulaMaciej Fijalkowski1-1/+1
[ Upstream commit b966ad832942b5a11e002f9b5ef102b08425b84a ] For bigger PAGE_SIZE archs, ice driver works on 3k Rx buffers. Therefore, ICE_LAST_OFFSET should take into account ICE_RXBUF_3072, not ICE_RXBUF_2048. Fixes: 7237f5b0dba4 ("ice: introduce legacy Rx flag") Suggested-by: Luiz Capitulino <luizcap@redhat.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04bonding: fix xfrm state handling when clearing active slaveNikolay Aleksandrov1-1/+1
[ Upstream commit c4c5c5d2ef40a9f67a9241dc5422eac9ffe19547 ] If the active slave is cleared manually the xfrm state is not flushed. This leads to xfrm add/del imbalance and adding the same state multiple times. For example when the device cannot handle anymore states we get: [ 1169.884811] bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA because it's filled with the same state after multiple active slave clearings. This change also has a few nice side effects: user-space gets a notification for the change, the old device gets its mac address and promisc/mcast adjusted properly. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04bonding: fix xfrm real_dev null pointer dereferenceNikolay Aleksandrov1-1/+0
[ Upstream commit f8cde9805981c50d0c029063dc7d82821806fc44 ] We shouldn't set real_dev to NULL because packets can be in transit and xfrm might call xdo_dev_offload_ok() in parallel. All callbacks assume real_dev is set. Example trace: kernel: BUG: unable to handle page fault for address: 0000000000001030 kernel: bond0: (slave eni0np1): making interface the new active one kernel: #PF: supervisor write access in kernel mode kernel: #PF: error_code(0x0002) - not-present page kernel: PGD 0 P4D 0 kernel: Oops: 0002 [#1] PREEMPT SMP kernel: CPU: 4 PID: 2237 Comm: ping Not tainted 6.7.7+ #12 kernel: Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 kernel: RIP: 0010:nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: Code: e0 0f 0b 48 83 7f 38 00 74 de 0f 0b 48 8b 47 08 48 8b 37 48 8b 78 40 e9 b2 e5 9a d7 66 90 0f 1f 44 00 00 48 8b 86 80 02 00 00 <83> 80 30 10 00 00 01 b8 01 00 00 00 c3 0f 1f 80 00 00 00 00 0f 1f kernel: bond0: (slave eni0np1): making interface the new active one kernel: RSP: 0018:ffffabde81553b98 EFLAGS: 00010246 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: kernel: RAX: 0000000000000000 RBX: ffff9eb404e74900 RCX: ffff9eb403d97c60 kernel: RDX: ffffffffc090de10 RSI: ffff9eb404e74900 RDI: ffff9eb3c5de9e00 kernel: RBP: ffff9eb3c0a42000 R08: 0000000000000010 R09: 0000000000000014 kernel: R10: 7974203030303030 R11: 3030303030303030 R12: 0000000000000000 kernel: R13: ffff9eb3c5de9e00 R14: ffffabde81553cc8 R15: ffff9eb404c53000 kernel: FS: 00007f2a77a3ad00(0000) GS:ffff9eb43bd00000(0000) knlGS:0000000000000000 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 kernel: CR2: 0000000000001030 CR3: 00000001122ab000 CR4: 0000000000350ef0 kernel: bond0: (slave eni0np1): making interface the new active one kernel: Call Trace: kernel: <TASK> kernel: ? __die+0x1f/0x60 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? page_fault_oops+0x142/0x4c0 kernel: ? do_user_addr_fault+0x65/0x670 kernel: ? kvm_read_and_reset_apf_flags+0x3b/0x50 kernel: bond0: (slave eni0np1): making interface the new active one kernel: ? exc_page_fault+0x7b/0x180 kernel: ? asm_exc_page_fault+0x22/0x30 kernel: ? nsim_bpf_uninit+0x50/0x50 [netdevsim] kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ? nsim_ipsec_offload_ok+0xc/0x20 [netdevsim] kernel: bond0: (slave eni0np1): making interface the new active one kernel: bond_ipsec_offload_ok+0x7b/0x90 [bonding] kernel: xfrm_output+0x61/0x3b0 kernel: bond0: (slave eni0np1): bond_ipsec_add_sa_all: failed to add SA kernel: ip_push_pending_frames+0x56/0x80 Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04bonding: fix null pointer deref in bond_ipsec_offload_okNikolay Aleksandrov1-0/+2
[ Upstream commit 95c90e4ad89d493a7a14fa200082e466e2548f9d ] We must check if there is an active slave before dereferencing the pointer. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04bonding: fix bond_ipsec_offload_ok return typeNikolay Aleksandrov1-12/+6
[ Upstream commit fc59b9a5f7201b9f7272944596113a82cc7773d5 ] Fix the return type which should be bool. Fixes: 955b785ec6b3 ("bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()") Signed-off-by: Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04ip6_tunnel: Fix broken GROThomas Bogendoerfer1-5/+7
[ Upstream commit 4b3e33fcc38f7750604b065c55a43e94c5bc3145 ] GRO code checks for matching layer 2 headers to see, if packet belongs to the same flow and because ip6 tunnel set dev->hard_header_len this check fails in cases, where it shouldn't. To fix this don't set hard_header_len, but use needed_headroom like ipv4/ip_tunnel.c does. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de> Link: https://patch.msgid.link/20240815151419.109864-1-tbogendoerfer@suse.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04netfilter: nft_counter: Synchronize nft_counter_reset() against reader.Sebastian Andrzej Siewior1-0/+5
[ Upstream commit a0b39e2dc7017ac667b70bdeee5293e410fab2fb ] nft_counter_reset() resets the counter by subtracting the previously retrieved value from the counter. This is a write operation on the counter and as such it requires to be performed with a write sequence of nft_counter_seq to serialize against its possible reader. Update the packets/ bytes within write-sequence of nft_counter_seq. Fixes: d84701ecbcd6a ("netfilter: nft_counter: rework atomic dump and reset") Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04kcm: Serialise kcm_sendmsg() for the same socket.Kuniyuki Iwashima2-0/+5
[ Upstream commit 807067bf014d4a3ae2cc55bd3de16f22a01eb580 ] syzkaller reported UAF in kcm_release(). [0] The scenario is 1. Thread A builds a skb with MSG_MORE and sets kcm->seq_skb. 2. Thread A resumes building skb from kcm->seq_skb but is blocked by sk_stream_wait_memory() 3. Thread B calls sendmsg() concurrently, finishes building kcm->seq_skb and puts the skb to the write queue 4. Thread A faces an error and finally frees skb that is already in the write queue 5. kcm_release() does double-free the skb in the write queue When a thread is building a MSG_MORE skb, another thread must not touch it. Let's add a per-sk mutex and serialise kcm_sendmsg(). [0]: BUG: KASAN: slab-use-after-free in __skb_unlink include/linux/skbuff.h:2366 [inline] BUG: KASAN: slab-use-after-free in __skb_dequeue include/linux/skbuff.h:2385 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] BUG: KASAN: slab-use-after-free in __skb_queue_purge include/linux/skbuff.h:3181 [inline] BUG: KASAN: slab-use-after-free in kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 Read of size 8 at addr ffff0000ced0fc80 by task syz-executor329/6167 CPU: 1 PID: 6167 Comm: syz-executor329 Tainted: G B 6.8.0-rc5-syzkaller-g9abbc24128bc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 Call trace: dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:291 show_stack+0x2c/0x3c arch/arm64/kernel/stacktrace.c:298 __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:377 [inline] print_report+0x178/0x518 mm/kasan/report.c:488 kasan_report+0xd8/0x138 mm/kasan/report.c:601 __asan_report_load8_noabort+0x20/0x2c mm/kasan/report_generic.c:381 __skb_unlink include/linux/skbuff.h:2366 [inline] __skb_dequeue include/linux/skbuff.h:2385 [inline] __skb_queue_purge_reason include/linux/skbuff.h:3175 [inline] __skb_queue_purge include/linux/skbuff.h:3181 [inline] kcm_release+0x170/0x4c8 net/kcm/kcmsock.c:1691 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Allocated by task 6166: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_alloc_info+0x70/0x84 mm/kasan/generic.c:626 unpoison_slab_object mm/kasan/common.c:314 [inline] __kasan_slab_alloc+0x74/0x8c mm/kasan/common.c:340 kasan_slab_alloc include/linux/kasan.h:201 [inline] slab_post_alloc_hook mm/slub.c:3813 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x204/0x4c0 mm/slub.c:3903 __alloc_skb+0x19c/0x3d8 net/core/skbuff.c:641 alloc_skb include/linux/skbuff.h:1296 [inline] kcm_sendmsg+0x1d3c/0x2124 net/kcm/kcmsock.c:783 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] sock_sendmsg+0x220/0x2c0 net/socket.c:768 splice_to_socket+0x7cc/0xd58 fs/splice.c:889 do_splice_from fs/splice.c:941 [inline] direct_splice_actor+0xec/0x1d8 fs/splice.c:1164 splice_direct_to_actor+0x438/0xa0c fs/splice.c:1108 do_splice_direct_actor fs/splice.c:1207 [inline] do_splice_direct+0x1e4/0x304 fs/splice.c:1233 do_sendfile+0x460/0xb3c fs/read_write.c:1295 __do_sys_sendfile64 fs/read_write.c:1362 [inline] __se_sys_sendfile64 fs/read_write.c:1348 [inline] __arm64_sys_sendfile64+0x160/0x3b4 fs/read_write.c:1348 __invoke_syscall arch/arm64/kernel/syscall.c:37 [inline] invoke_syscall+0x98/0x2b8 arch/arm64/kernel/syscall.c:51 el0_svc_common+0x130/0x23c arch/arm64/kernel/syscall.c:136 do_el0_svc+0x48/0x58 arch/arm64/kernel/syscall.c:155 el0_svc+0x54/0x168 arch/arm64/kernel/entry-common.c:712 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 Freed by task 6167: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x40/0x78 mm/kasan/common.c:68 kasan_save_free_info+0x5c/0x74 mm/kasan/generic.c:640 poison_slab_object+0x124/0x18c mm/kasan/common.c:241 __kasan_slab_free+0x3c/0x78 mm/kasan/common.c:257 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2121 [inline] slab_free mm/slub.c:4299 [inline] kmem_cache_free+0x15c/0x3d4 mm/slub.c:4363 kfree_skbmem+0x10c/0x19c __kfree_skb net/core/skbuff.c:1109 [inline] kfree_skb_reason+0x240/0x6f4 net/core/skbuff.c:1144 kfree_skb include/linux/skbuff.h:1244 [inline] kcm_release+0x104/0x4c8 net/kcm/kcmsock.c:1685 __sock_release net/socket.c:659 [inline] sock_close+0xa4/0x1e8 net/socket.c:1421 __fput+0x30c/0x738 fs/file_table.c:376 ____fput+0x20/0x30 fs/file_table.c:404 task_work_run+0x230/0x2e0 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x618/0x1f64 kernel/exit.c:871 do_group_exit+0x194/0x22c kernel/exit.c:1020 get_signal+0x1500/0x15ec kernel/signal.c:2893 do_signal+0x23c/0x3b44 arch/arm64/kernel/signal.c:1249 do_notify_resume+0x74/0x1f4 arch/arm64/kernel/entry-common.c:148 exit_to_user_mode_prepare arch/arm64/kernel/entry-common.c:169 [inline] exit_to_user_mode arch/arm64/kernel/entry-common.c:178 [inline] el0_svc+0xac/0x168 arch/arm64/kernel/entry-common.c:713 el0t_64_sync_handler+0x84/0xfc arch/arm64/kernel/entry-common.c:730 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:598 The buggy address belongs to the object at ffff0000ced0fc80 which belongs to the cache skbuff_head_cache of size 240 The buggy address is located 0 bytes inside of freed 240-byte region [ffff0000ced0fc80, ffff0000ced0fd70) The buggy address belongs to the physical page: page:00000000d35f4ae4 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10ed0f flags: 0x5ffc00000000800(slab|node=0|zone=2|lastcpupid=0x7ff) page_type: 0xffffffff() raw: 05ffc00000000800 ffff0000c1cbf640 fffffdffc3423100 dead000000000004 raw: 0000000000000000 00000000000c000c 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff0000ced0fb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff0000ced0fc00: fb fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc >ffff0000ced0fc80: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff0000ced0fd00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc ffff0000ced0fd80: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb Fixes: ab7ac4eb9832 ("kcm: Kernel Connection Multiplexor module") Reported-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=b72d86aa5df17ce74c60 Tested-by: syzbot+b72d86aa5df17ce74c60@syzkaller.appspotmail.com Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240815220437.69511-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04tc-testing: don't access non-existent variable on exceptionSimon Horman1-1/+0
[ Upstream commit a0c9fe5eecc97680323ee83780ea3eaf440ba1b7 ] Since commit 255c1c7279ab ("tc-testing: Allow test cases to be skipped") the variable test_ordinal doesn't exist in call_pre_case(). So it should not be accessed when an exception occurs. This resolves the following splat: ... During handling of the above exception, another exception occurred: Traceback (most recent call last): File ".../tdc.py", line 1028, in <module> main() File ".../tdc.py", line 1022, in main set_operation_mode(pm, parser, args, remaining) File ".../tdc.py", line 966, in set_operation_mode catresults = test_runner_serial(pm, args, alltests) File ".../tdc.py", line 642, in test_runner_serial (index, tsr) = test_runner(pm, args, alltests) File ".../tdc.py", line 536, in test_runner res = run_one_test(pm, args, index, tidx) File ".../tdc.py", line 419, in run_one_test pm.call_pre_case(tidx) File ".../tdc.py", line 146, in call_pre_case print('test_ordinal is {}'.format(test_ordinal)) NameError: name 'test_ordinal' is not defined Fixes: 255c1c7279ab ("tc-testing: Allow test cases to be skipped") Signed-off-by: Simon Horman <horms@kernel.org> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20240815-tdc-test-ordinal-v1-1-0255c122a427@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04Bluetooth: SMP: Fix assumption of Central always being InitiatorLuiz Augusto von Dentz1-72/+72
[ Upstream commit 28cd47f75185c4818b0fb1b46f2f02faaba96376 ] SMP initiator role shall be considered the one that initiates the pairing procedure with SMP_CMD_PAIRING_REQ: BLUETOOTH CORE SPECIFICATION Version 5.3 | Vol 3, Part H page 1557: Figure 2.1: LE pairing phases Note that by sending SMP_CMD_SECURITY_REQ it doesn't change the role to be Initiator. Link: https://github.com/bluez/bluez/issues/567 Fixes: b28b4943660f ("Bluetooth: Add strict checks for allowed SMP PDUs") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04Bluetooth: hci_core: Fix LE quote calculationLuiz Augusto von Dentz1-12/+7
[ Upstream commit 932021a11805b9da4bd6abf66fe233cccd59fe0e ] Function hci_sched_le needs to update the respective counter variable inplace other the likes of hci_quote_sent would attempt to use the possible outdated value of conn->{le_cnt,acl_cnt}. Link: https://github.com/bluez/bluez/issues/915 Fixes: 73d80deb7bdf ("Bluetooth: prioritizing data over HCI") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04dm suspend: return -ERESTARTSYS instead of -EINTRMikulas Patocka1-2/+2
[ Upstream commit 1e1fd567d32fcf7544c6e09e0e5bc6c650da6e23 ] This commit changes device mapper, so that it returns -ERESTARTSYS instead of -EINTR when it is interrupted by a signal (so that the ioctl can be restarted). The manpage signal(7) says that the ioctl function should be restarted if the signal was handled with SA_RESTART. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04media: solo6x10: replace max(a, min(b, c)) by clamp(b, a, c)Aurelien Jarno1-5/+5
commit 31e97d7c9ae3de072d7b424b2cf706a03ec10720 upstream. This patch replaces max(a, min(b, c)) by clamp(b, a, c) in the solo6x10 driver. This improves the readability and more importantly, for the solo6x10-p2m.c file, this reduces on my system (x86-64, gcc 13): - the preprocessed size from 121 MiB to 4.5 MiB; - the build CPU time from 46.8 s to 1.6 s; - the build memory from 2786 MiB to 98MiB. In fine, this allows this relatively simple C file to be built on a 32-bit system. Reported-by: Jiri Slaby <jirislaby@gmail.com> Closes: https://lore.kernel.org/lkml/18c6df0d-45ed-450c-9eda-95160a2bbb8e@gmail.com/ Cc: <stable@vger.kernel.org> # v6.7+ Suggested-by: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> Reviewed-by: David Laight <David.Laight@ACULAB.COM> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04block: use "unsigned long" for blk_validate_block_size().Tetsuo Handa1-1/+1
commit 37ae5a0f5287a52cf51242e76ccf198d02ffe495 upstream. Since lo_simple_ioctl(LOOP_SET_BLOCK_SIZE) and ioctl(NBD_SET_BLKSIZE) pass user-controlled "unsigned long arg" to blk_validate_block_size(), "unsigned long" should be used for validation. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/9ecbf057-4375-c2db-ab53-e4cc0dff953d@i-love.sakura.ne.jp Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: David Hunter <david.hunter.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04gtp: pull network headers in gtp_dev_xmit()Eric Dumazet1-0/+3
commit 3a3be7ff9224f424e485287b54be00d2c6bd9c40 upstream. syzbot/KMSAN reported use of uninit-value in get_dev_xmit() [1] We must make sure the IPv4 or Ipv6 header is pulled in skb->head before accessing fields in them. Use pskb_inet_may_pull() to fix this issue. [1] BUG: KMSAN: uninit-value in ipv6_pdp_find drivers/net/gtp.c:220 [inline] BUG: KMSAN: uninit-value in gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] BUG: KMSAN: uninit-value in gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 ipv6_pdp_find drivers/net/gtp.c:220 [inline] gtp_build_skb_ip6 drivers/net/gtp.c:1229 [inline] gtp_dev_xmit+0x1424/0x2540 drivers/net/gtp.c:1281 __netdev_start_xmit include/linux/netdevice.h:4913 [inline] netdev_start_xmit include/linux/netdevice.h:4922 [inline] xmit_one net/core/dev.c:3580 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3596 __dev_queue_xmit+0x358c/0x5610 net/core/dev.c:4423 dev_queue_xmit include/linux/netdevice.h:3105 [inline] packet_xmit+0x9c/0x6c0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3145 [inline] packet_sendmsg+0x90e3/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: slab_post_alloc_hook mm/slub.c:3994 [inline] slab_alloc_node mm/slub.c:4037 [inline] kmem_cache_alloc_node_noprof+0x6bf/0xb80 mm/slub.c:4080 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:583 __alloc_skb+0x363/0x7b0 net/core/skbuff.c:674 alloc_skb include/linux/skbuff.h:1320 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6526 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2815 packet_alloc_skb net/packet/af_packet.c:2994 [inline] packet_snd net/packet/af_packet.c:3088 [inline] packet_sendmsg+0x749c/0xa3a0 net/packet/af_packet.c:3177 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 __sys_sendto+0x685/0x830 net/socket.c:2204 __do_sys_sendto net/socket.c:2216 [inline] __se_sys_sendto net/socket.c:2212 [inline] __x64_sys_sendto+0x125/0x1d0 net/socket.c:2212 x64_sys_call+0x3799/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:45 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f CPU: 0 UID: 0 PID: 7115 Comm: syz.1.515 Not tainted 6.11.0-rc1-syzkaller-00043-g94ede2a3e913 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 06/27/2024 Fixes: 999cb275c807 ("gtp: add IPv6 support") Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Harald Welte <laforge@gnumonks.org> Reviewed-by: Pablo Neira Ayuso <pablo@netfilter.org> Link: https://patch.msgid.link/20240808132455.3413916-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-09-04hrtimer: Prevent queuing of hrtimer without a function callbackPhil Chang1-0/+2
[ Upstream commit 5a830bbce3af16833fe0092dec47b6dd30279825 ] The hrtimer function callback must not be NULL. It has to be specified by the call side but it is not validated by the hrtimer code. When a hrtimer is queued without a function callback, the kernel crashes with a null pointer dereference when trying to execute the callback in __run_hrtimer(). Introduce a validation before queuing the hrtimer in hrtimer_start_range_ns(). [anna-maria: Rephrase commit message] Signed-off-by: Phil Chang <phil.chang@mediatek.com> Signed-off-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04nvmet-rdma: fix possible bad dereference when freeing rspsSagi Grimberg1-12/+4
[ Upstream commit 73964c1d07c054376f1b32a62548571795159148 ] It is possible that the host connected and saw a cm established event and started sending nvme capsules on the qp, however the ctrl did not yet see an established event. This is why the rsp_wait_list exists (for async handling of these cmds, we move them to a pending list). Furthermore, it is possible that the ctrl cm times out, resulting in a connect-error cm event. in this case we hit a bad deref [1] because in nvmet_rdma_free_rsps we assume that all the responses are in the free list. We are freeing the cmds array anyways, so don't even bother to remove the rsp from the free_list. It is also guaranteed that we are not racing anything when we are releasing the queue so no other context accessing this array should be running. [1]: -- Workqueue: nvmet-free-wq nvmet_rdma_free_queue_work [nvmet_rdma] [...] pc : nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma] lr : nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma] Call trace: nvmet_rdma_free_rsps+0x78/0xb8 [nvmet_rdma] nvmet_rdma_free_queue_work+0x88/0x120 [nvmet_rdma] process_one_work+0x1ec/0x4a0 worker_thread+0x48/0x490 kthread+0x158/0x160 ret_from_fork+0x10/0x18 -- Signed-off-by: Sagi Grimberg <sagi@grimberg.me> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04ext4: set the type of max_zeroout to unsigned int to avoid overflowBaokun Li1-1/+2
[ Upstream commit 261341a932d9244cbcd372a3659428c8723e5a49 ] The max_zeroout is of type int and the s_extent_max_zeroout_kb is of type uint, and the s_extent_max_zeroout_kb can be freely modified via the sysfs interface. When the block size is 1024, max_zeroout may overflow, so declare it as unsigned int to avoid overflow. Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240319113325.3110393-9-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_allocGuanrui Huang1-2/+0
[ Upstream commit 382d2ffe86efb1e2fa803d2cf17e5bfc34e574f3 ] This BUG_ON() is useless, because the same effect will be obtained by letting the code run its course and vm being dereferenced, triggering an exception. So just remove this check. Signed-off-by: Guanrui Huang <guanrui.huang@linux.alibaba.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Zenghui Yu <yuzenghui@huawei.com> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20240418061053.96803-3-guanrui.huang@linux.alibaba.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04usb: dwc3: core: Skip setting event buffers for host only controllersKrishna Kurapati1-0/+13
[ Upstream commit 89d7f962994604a3e3d480832788d06179abefc5 ] On some SoC's like SA8295P where the tertiary controller is host-only capable, GEVTADDRHI/LO, GEVTSIZ, GEVTCOUNT registers are not accessible. Trying to access them leads to a crash. For DRD/Peripheral supported controllers, event buffer setup is done again in gadget_pullup. Skip setup or cleanup of event buffers if controller is host-only capable. Suggested-by: Johan Hovold <johan@kernel.org> Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Bjorn Andersson <andersson@kernel.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20240420044901.884098-4-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04s390/iucv: fix receive buffer virtual vs physical address confusionAlexander Gordeev1-2/+1
[ Upstream commit 4e8477aeb46dfe74e829c06ea588dd00ba20c8cc ] Fix IUCV_IPBUFLST-type buffers virtual vs physical address confusion. This does not fix a bug since virtual and physical address spaces are currently the same. Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04openrisc: Call setup_memory() earlier in the init sequenceOreoluwa Babatunde1-3/+3
[ Upstream commit 7b432bf376c9c198a7ff48f1ed14a14c0ffbe1fe ] The unflatten_and_copy_device_tree() function contains a call to memblock_alloc(). This means that memblock is allocating memory before any of the reserved memory regions are set aside in the setup_memory() function which calls early_init_fdt_scan_reserved_mem(). Therefore, there is a possibility for memblock to allocate from any of the reserved memory regions. Hence, move the call to setup_memory() to be earlier in the init sequence so that the reserved memory regions are set aside before any allocations are done using memblock. Signed-off-by: Oreoluwa Babatunde <quic_obabatun@quicinc.com> Signed-off-by: Stafford Horne <shorne@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04NFS: avoid infinite loop in pnfs_update_layout.NeilBrown1-0/+8
[ Upstream commit 2fdbc20036acda9e5694db74a032d3c605323005 ] If pnfsd_update_layout() is called on a file for which recovery has failed it will enter a tight infinite loop. NFS_LAYOUT_INVALID_STID will be set, nfs4_select_rw_stateid() will return -EIO, and nfs4_schedule_stateid_recovery() will do nothing, so nfs4_client_recover_expired_lease() will not wait. So the code will loop indefinitely. Break the loop by testing the validity of the open stateid at the top of the loop. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04nvmet-tcp: do not continue for invalid icreqHannes Reinecke1-0/+1
[ Upstream commit 0889d13b9e1cbef49e802ae09f3b516911ad82a1 ] When the length check for an icreq sqe fails we should not continue processing but rather return immediately as all other contents of that sqe cannot be relied on. Signed-off-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Keith Busch <kbusch@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04net: hns3: add checking for vf id of mailboxJian Shen1-3/+4
[ Upstream commit 4e2969a0d6a7549bc0bc1ebc990588b622c4443d ] Add checking for vf id of mailbox, in order to avoid array out-of-bounds risk. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Reviewed-by: Sunil Goutham <sgoutham@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04Bluetooth: bnep: Fix out-of-bound accessLuiz Augusto von Dentz1-1/+2
[ Upstream commit 0f0639b4d6f649338ce29c62da3ec0787fa08cd1 ] This fixes attempting to access past ethhdr.h_source, although it seems intentional to copy also the contents of h_proto this triggers out-of-bound access problems with the likes of static analyzer, so this instead just copy ETH_ALEN and then proceed to use put_unaligned to copy h_proto separetely. Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04usb: gadget: fsl: Increase size of name buffer for endpointsUwe Kleine-König1-1/+1
[ Upstream commit 87850f6cc20911e35eafcbc1d56b0d649ae9162d ] This fixes a W=1 warning about sprintf writing up to 16 bytes into a buffer of size 14. There is no practical relevance because there are not more than 32 endpoints. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/6754df25c56aae04f8110594fad2cd2452b1862a.1708709120.git.u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04f2fs: fix to do sanity check in update_sit_entryZhiguo Niu1-2/+3
[ Upstream commit 36959d18c3cf09b3c12157c6950e18652067de77 ] If GET_SEGNO return NULL_SEGNO for some unecpected case, update_sit_entry will access invalid memory address, cause system crash. It is better to do sanity check about GET_SEGNO just like update_segment_mtime & locate_dirty_segment. Also remove some redundant judgment code. Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com> Reviewed-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04btrfs: delete pointless BUG_ON check on quota root in ↵David Sterba1-2/+0
btrfs_qgroup_account_extent() [ Upstream commit f40a3ea94881f668084f68f6b9931486b1606db0 ] The BUG_ON is deep in the qgroup code where we can expect that it exists. A NULL pointer would cause a crash. It was added long ago in 550d7a2ed5db35 ("btrfs: qgroup: Add new qgroup calculation function btrfs_qgroup_account_extents()."). It maybe made sense back then as the quota enable/disable state machine was not that robust as it is nowadays, so we can just delete it. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04btrfs: send: handle unexpected data in header buffer in begin_cmd()David Sterba1-1/+6
[ Upstream commit e80e3f732cf53c64b0d811e1581470d67f6c3228 ] Change BUG_ON to a proper error handling in the unlikely case of seeing data when the command is started. This is supposed to be reset when the command is finished (send_cmd, send_encoded_extent). Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04btrfs: handle invalid root reference found in may_destroy_subvol()David Sterba1-1/+8
[ Upstream commit 6fbc6f4ac1f4907da4fc674251527e7dc79ffbf6 ] The may_destroy_subvol() looks up a root by a key, allowing to do an inexact search when key->offset is -1. It's never expected to find such item, as it would break the allowed range of a root id. Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04btrfs: change BUG_ON to assertion when checking for delayed_node rootDavid Sterba1-1/+1
[ Upstream commit be73f4448b607e6b7ce41cd8ef2214fdf6e7986f ] The pointer to root is initialized in btrfs_init_delayed_node(), no need to check for it again. Change the BUG_ON to assertion. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04powerpc/boot: Only free if realloc() succeedsMichael Ellerman1-2/+3
[ Upstream commit f2d5bccaca3e8c09c9b9c8485375f7bdbb2631d2 ] simple_realloc() frees the original buffer (ptr) even if the reallocation failed. Fix it to behave like standard realloc() and only free the original buffer if the reallocation succeeded. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20240229115149.749264-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04powerpc/boot: Handle allocation failure in simple_realloc()Li zeming1-1/+3
[ Upstream commit 69b0194ccec033c208b071e019032c1919c2822d ] simple_malloc() will return NULL when there is not enough memory left. Check pointer 'new' before using it to copy the old data. Signed-off-by: Li zeming <zeming@nfschina.com> [mpe: Reword subject, use change log from Christophe] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20221219021816.3012-1-zeming@nfschina.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04parisc: Use irq_enter_rcu() to fix warning at kernel/context_tracking.c:367Helge Deller1-2/+2
[ Upstream commit 73cb4a2d8d7e0259f94046116727084f21e4599f ] Use irq*_rcu() functions to fix this kernel warning: WARNING: CPU: 0 PID: 0 at kernel/context_tracking.c:367 ct_irq_enter+0xa0/0xd0 Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc3-64bit+ #1037 Hardware name: 9000/785/C3700 IASQ: 0000000000000000 0000000000000000 IAOQ: 00000000412cd758 00000000412cd75c IIR: 03ffe01f ISR: 0000000000000000 IOR: 0000000043c20c20 CPU: 0 CR30: 0000000041caa000 CR31: 0000000000000000 ORIG_R28: 0000000000000005 IAOQ[0]: ct_irq_enter+0xa0/0xd0 IAOQ[1]: ct_irq_enter+0xa4/0xd0 RP(r2): irq_enter+0x34/0x68 Backtrace: [<000000004034a3ec>] irq_enter+0x34/0x68 [<000000004030dc48>] do_cpu_irq_mask+0xc0/0x450 [<0000000040303070>] intr_return+0x0/0xc Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04memory: stm32-fmc2-ebi: check regmap_read return valueChristophe Kerello1-34/+88
[ Upstream commit 722463f73bcf65a8c818752a38c14ee672c77da1 ] Check regmap_read return value to avoid to use uninitialized local variables. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Link: https://lore.kernel.org/r/20240226101428.37791-3-christophe.kerello@foss.st.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04x86: Increase brk randomness entropy for 64-bit systemsKees Cook1-1/+4
[ Upstream commit 44c76825d6eefee9eb7ce06c38e1a6632ac7eb7d ] In commit c1d171a00294 ("x86: randomize brk"), arch_randomize_brk() was defined to use a 32MB range (13 bits of entropy), but was never increased when moving to 64-bit. The default arch_randomize_brk() uses 32MB for 32-bit tasks, and 1GB (18 bits of entropy) for 64-bit tasks. Update x86_64 to match the entropy used by arm64 and other 64-bit architectures. Reported-by: y0un9n132@gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Jiri Kosina <jkosina@suse.com> Closes: https://lore.kernel.org/linux-hardening/CA+2EKTVLvc8hDZc+2Yhwmus=dzOUG5E4gV7ayCbu0MPJTZzWkw@mail.gmail.com/ Link: https://lore.kernel.org/r/20240217062545.1631668-1-keescook@chromium.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04md: clean up invalid BUG_ON in md_ioctlLi Nan1-5/+0
[ Upstream commit 9dd8702e7cd28ebf076ff838933f29cf671165ec ] 'disk->private_data' is set to mddev in md_alloc() and never set to NULL, and users need to open mddev before submitting ioctl. So mddev must not have been freed during ioctl, and there is no need to check mddev here. Clean up it. Signed-off-by: Li Nan <linan122@huawei.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Signed-off-by: Song Liu <song@kernel.org> Link: https://lore.kernel.org/r/20240226031444.3606764-4-linan666@huaweicloud.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04netlink: hold nlk->cb_mutex longer in __netlink_dump_start()Eric Dumazet1-7/+6
[ Upstream commit b5590270068c4324dac4a2b5a4a156e02e21339f ] __netlink_dump_start() releases nlk->cb_mutex right before calling netlink_dump() which grabs it again. This seems dangerous, even if KASAN did not bother yet. Add a @lock_taken parameter to netlink_dump() to let it grab the mutex if called from netlink_recvmsg() only. Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04virtiofs: forbid newlines in tagsStefan Hajnoczi1-0/+10
[ Upstream commit 40488cc16f7ea0d193a4e248f0d809c25cc377db ] Newlines in virtiofs tags are awkward for users and potential vectors for string injection attacks. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04drm/lima: set gp bus_stop bit before hard resetErico Nunes1-0/+12
[ Upstream commit 27aa58ec85f973d98d336df7b7941149308db80f ] This is required for reliable hard resets. Otherwise, doing a hard reset while a task is still running (such as a task which is being stopped by the drm_sched timeout handler) may result in random mmu write timeouts or lockups which cause the entire gpu to hang. Signed-off-by: Erico Nunes <nunes.erico@gmail.com> Signed-off-by: Qiang Yu <yuq825@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240124025947.2110659-5-nunes.erico@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04net/sun3_82586: Avoid reading past buffer in debug outputKees Cook1-1/+1
[ Upstream commit 4bea747f3fbec33c16d369b2f51e55981d7c78d0 ] Since NUM_XMIT_BUFFS is always 1, building m68k with sun3_defconfig and -Warraybounds, this build warning is visible[1]: drivers/net/ethernet/i825xx/sun3_82586.c: In function 'sun3_82586_timeout': drivers/net/ethernet/i825xx/sun3_82586.c:990:122: warning: array subscript 1 is above array bounds of 'volatile struct transmit_cmd_struct *[1]' [-Warray-bounds=] 990 | printk("%s: command-stats: %04x %04x\n",dev->name,swab16(p->xmit_cmds[0]->cmd_status),swab16(p->xmit_cmds[1]->cmd_status)); | ~~~~~~~~~~~~^~~ ... drivers/net/ethernet/i825xx/sun3_82586.c:156:46: note: while referencing 'xmit_cmds' 156 | volatile struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS]; Avoid accessing index 1 since it doesn't exist. Link: https://github.com/KSPP/linux/issues/325 [1] Cc: Sam Creasey <sammy@sammy.net> Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/20240206161651.work.876-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04scsi: lpfc: Initialize status local variable in lpfc_sli4_repost_sgl_list()Justin Tee1-1/+1
[ Upstream commit 3d0f9342ae200aa1ddc4d6e7a573c6f8f068d994 ] A static code analyzer tool indicates that the local variable called status in the lpfc_sli4_repost_sgl_list() routine could be used to print garbage uninitialized values in the routine's log message. Fix by initializing to zero. Signed-off-by: Justin Tee <justin.tee@broadcom.com> Link: https://lore.kernel.org/r/20240131185112.149731-2-justintee8345@gmail.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-09-04fs: binfmt_elf_efpic: don't use missing interpreter's propertiesMax Filippov1-1/+1
[ Upstream commit 15fd1dc3dadb4268207fa6797e753541aca09a2a ] Static FDPIC executable may get an executable stack even when it has non-executable GNU_STACK segment. This happens when STACK segment has rw permissions, but does not specify stack size. In that case FDPIC loader uses permissions of the interpreter's stack, and for static executables with no interpreter it results in choosing the arch-default permissions for the stack. Fix that by using the interpreter's properties only when the interpreter is actually used. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Link: https://lore.kernel.org/r/20240118150637.660461-1-jcmvbkbc@gmail.com Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-26 05:46:29 +0300