summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-13mmc: sdhci-of-arasan: Correct formatting and provide missing function arg(s)Lee Jones1-1/+2
Kerneldoc expects arg descriptions to be in the format '@.*: '. If either the '@' or the ':' is omitted then kerneldoc complains that the description is missing. Add the missing ':' here and provide a new description for 'value'. Fixes the following kernel build W=1 warnings: drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'host' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-of-arasan.c:1394: warning: Function parameter or member 'value' not described in 'sdhci_arasan_update_support64b' drivers/mmc/host/sdhci-msm.c:1887:6: warning: no previous prototype for ‘sdhci_msm_dump_vendor_regs’ [-Wmissing-prototypes] Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Xiaobo Xie <X.Xie@freescale.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Soeren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-12-lee.jones@linaro.org Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: rtsx_usb_sdmmc: Remove set but unused variable 'err'Lee Jones1-3/+2
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_usb_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_usb_sdmmc.c:657:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 657 | int err, i; | ^~~ Cc: Roger Tseng <rogerable@realtek.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-11-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: rtsx_pci_sdmmc: Remove set but unused variable 'err'Lee Jones1-2/+2
Seeing as sd_wait_data_idle() returns void and only a very specific read value is checked, there doesn't seem to be a good reason to check the return value of rtsx_pci_read_register(). So remove the assignment and definition of 'err'. Squashes the following W=1 kernel build warning: drivers/mmc/host/rtsx_pci_sdmmc.c: In function ‘sd_wait_data_idle’: drivers/mmc/host/rtsx_pci_sdmmc.c:678:6: warning: variable ‘err’ set but not used [-Wunused-but-set-variable] 678 | int err, i; | ^~~ Cc: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-10-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: dw_mmc-exynos: Add kerneldoc descriptions of for 'dev' argsLee Jones1-0/+2
Provide missing documentation for dw_mci_exynos_suspend_noirq() and dw_mci_exynos_resume_noirq() function headers. Fixes the following W=1 kernel build warnings: drivers/mmc/host/dw_mmc-exynos.c:184: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_suspend_noirq' drivers/mmc/host/dw_mmc-exynos.c:200: warning: Function parameter or member 'dev' not described in 'dw_mci_exynos_resume_noirq' Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Thomas Abraham <thomas.ab@samsung.com> Cc: linux-samsung-soc@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20200701124702.908713-9-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Correct misspelling of 'mq' in mmc_init_request()'s docsLee Jones1-1/+1
Correcting this misspelling squashes the following W=1 build warning(s): mmc/core/queue.c:212: warning: Function parameter or member 'mq' not described in '__mmc_init_request' mmc/core/queue.c:212: warning: Excess function parameter 'q' description in '__mmc_init_request' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-8-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: atmel-mci: Provide 2 new and correct 1 existing property descriptionLee Jones1-1/+3
'sg_len' and 'dma_conf' are missing correct kerneldoc documentation and 'buf_phys_addr' was misspelled. Correcting these issues fixes the following W=1 kernel build issues: mmc/host/atmel-mci.c:352: warning: Function parameter or member 'sg_len' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'buf_phys_addr' not described in 'atmel_mci' mmc/host/atmel-mci.c:352: warning: Function parameter or member 'dma_conf' not described in 'atmel_mci' Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-7-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: mtk-sd: Demote msdc_recheck_sdio_irq() function headerLee Jones1-2/+1
No other function in the file is documented using kerneldoc and no effort to document the function arguments have been made. It's a bit of an oddity to say the least. Let's downgrade it from kerneldoc to a standard comment block instead. Fixes the following W=1 kernel build warning: drivers/mmc/host/mtk-sd.c:1030: warning: Function parameter or member 'host' not described in 'msdc_recheck_sdio_irq' Cc: Chaotian Jing <chaotian.jing@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Link: https://lore.kernel.org/r/20200701124702.908713-6-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-s3c: Provide documentation for missing struct propertiesLee Jones1-0/+4
Describe properties; ext_cd_irq, clk_rates and no_divider (x2). Squashes the following W=1 kernel build warnings: drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'ext_cd_irq' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'clk_rates' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:126: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c' drivers/mmc/host/sdhci-s3c.c:139: warning: Function parameter or member 'no_divider' not described in 'sdhci_s3c_drv_data' Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Link: https://lore.kernel.org/r/20200701124702.908713-5-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Add missing documetation for 'mmc' and 'ios'Lee Jones1-0/+2
Remainder of the kerneldoc descriptions look present and correct. Fixes the following W=1 kernel build warnings: drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'mmc' not described in 'mmc_regulator_set_vqmmc' drivers/mmc/core/regulator.c:178: warning: Function parameter or member 'ios' not described in 'mmc_regulator_set_vqmmc' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-4-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Provide description for sdio_set_host_pm_flags()'s 'flag' argLee Jones1-0/+1
Add missing kerneldoc entry for sdio_set_host_pm_flags()'s 'flag' function argument. Fixes the following W=1 kernel build warning: kernel/drivers/mmc/core/sdio_io.c:722: warning: Function parameter or member 'flags' not described in 'sdio_set_host_pm_flags' Cc: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-3-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Mark fixups as __maybe_unusedLee Jones1-3/+3
Not all source files which include quirks.h make use of the all of the available fixup information. When this happens the compiler complains that some constant variables are defined by never used. We can fix this by telling the compiler that this intentional by simply marking them as __maybe_unused. Fixes the following W=1 kernel build warnings: In file included from drivers/mmc/core/sdio.c:22: drivers/mmc/core/quirks.h:105:31: warning: ‘mmc_ext_csd_fixups’ defined but not used [-Wunused-const-variable=] 105 | static const struct mmc_fixup mmc_ext_csd_fixups[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ In file included from drivers/mmc/core/mmc.c:25: drivers/mmc/core/quirks.h:123:31: warning: ‘sdio_fixup_methods’ defined but not used [-Wunused-const-variable=] 123 | static const struct mmc_fixup sdio_fixup_methods[] = { | ^~~~~~~~~~~~~~~~~~ drivers/mmc/core/quirks.h:17:31: warning: ‘mmc_blk_fixups’ defined but not used [-Wunused-const-variable=] 17 | static const struct mmc_fixup mmc_blk_fixups[] = { | ^~~~~~~~~~~~~~ Cc: Andrei Warkentin <andreiw@motorola.com> Cc: Martin Mares <mj@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200701124702.908713-2-lee.jones@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Make function sdhci_msm_dump_vendor_regs() staticHulk Robot1-1/+1
Fix sparse build warning: drivers/mmc/host/sdhci-msm.c:1888:6: warning: symbol 'sdhci_msm_dump_vendor_regs' was not declared. Should it be static? Signed-off-by: Hulk Robot <hulkci@huawei.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200702020347.77214-1-weiyongjun1@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: Fix dma unmapping in error casesYoshihiro Shimoda1-0/+12
If this controller doesn't issue interrupt for response of command, this driver lacks to call dma_unmap_sg(). So, fix the issue by using end() of struct tmio_mmc_dma_ops. Reported-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Fixes: 2a68ea7896e3 ("mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMAC") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-4-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: renesas_sdhi_internal_dmac: clean up the code for dma completeYoshihiro Shimoda1-5/+13
To add end() operation in the future, clean the code of renesas_sdhi_internal_dmac_complete_tasklet_fn(). No behavior change. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-3-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: tmio: core: Add end operation into tmio_mmc_dma_opsYoshihiro Shimoda2-0/+11
Related drivers like renesas_sdhi_internal_dmac are possible to lack dma unmaping in error cases (for example response timeout). Since tmio_mmc_finish_request() will be always called in any case, to fix the issue, add end operation into struct tmio_mmc_dma_ops and call the operation in tmio_mmc_finish_request() to call dma_ummap API by the related drivers correctly. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1590044466-28372-2-git-send-email-yoshihiro.shimoda.uh@renesas.com Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Move SDIO IDs from rsi_sdio driver to common include filePali Rohár3-8/+8
Define appropriate macro names for consistency with other macros. Signed-off-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/20200629072144.24351-1-pali@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Use internal voltage controlVeerabhadrarao Badiganti1-9/+197
On qcom SD host controllers voltage switching be done after the HW is ready for it. The HW informs its readiness through power irq. The voltage switching should happen only then. Use the internal voltage switching and then control the voltage switching using power irq. IO-bus supply of eMMC would be kept always-on. So set the load for this supply to configure it in LPM when eMMC is suspend state and in HPM when eMMC is active. Co-developed-by: Asutosh Das <asutoshd@codeaurora.org> Signed-off-by: Asutosh Das <asutoshd@codeaurora.org> Co-developed-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Co-developed-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1592919288-1020-4-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Set default power mode in mmc_alloc_host()Veerabhadrarao Badiganti2-1/+1
Set the default power mode, MMC_POWER_UNDEFINED, in mmc_alloc_host() rather than in mmc_start_host(). This enables host drivers to make use of the initial state during ->probe(). Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Link: https://lore.kernel.org/r/1592919288-1020-3-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci: Allow platform controlled voltage switchingVijay Viswanath2-13/+20
If vendor platform drivers are controlling whole logic of voltage switching, then sdhci driver no need control vqmmc regulator. So skip enabling/disable vqmmc from SDHC driver. Signed-off-by: Vijay Viswanath <vviswana@codeaurora.org> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@codeaurora.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592919288-1020-2-git-send-email-vbadigan@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-acpi: For amd device set driver type as MMC_SET_DRIVER_TYPE_AAkshu Agrawal1-0/+1
HS400/HS200/eMMC HS doesn't have Preset Value register. Hence, sdhci_set_ios function overrides the value set by fmw to SDHCI_CTRL_DRV_TYPE_B. This patch sets drv_type to MMC_SET_DRIVER_TYPE_A so that host_control2 register gets updated with the required strength value. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200623133347.4598-1-akshu.agrawal@amd.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-esdhc-imx: dump internal IC debug status during errorHaibo Chen1-0/+39
USDHC of i.MX has internal IC debug register, which record the IC logical status. So dump these logical status in error condition, this can help analyzing issue. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1592985830-13038-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: fix clock rate setting for SDR12/SDR25 modeHaibo Chen1-7/+8
In current code logic, when work in SDR12/SDR25 mode, the final clock rate is incorrect, just the legancy 400KHz, because the card->sw_caps.sd3_bus_mode do not has the flag SD_MODE_UHS_SDR12 or SD_MODE_UHS_SDR25. Besides, SDIO_SPEED_SDR12 is actually value 0, and every mode need to config the timing and clock rate, so remove the ‘if’ operator. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Tested-by: Pali Rohár <pali@kernel.org> Link: https://lore.kernel.org/r/1592813959-5914-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add support for clkbuf_sel propertyFaiz Abbas1-0/+11
Add support for writing new clkbuf_sel property for the J721e 4 bit IP. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-7-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Update delay chain configurationFaiz Abbas1-1/+9
For speed modes where DLL is not enabled write to TXDLYCLK to enable transmitter delay chain mode. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-6-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Fix conditions for enabling dllFaiz Abbas1-22/+20
The clock > CLOCK_TOO_SLOW_HZ condition gating phy configuration is only required because dll should not be enabled at too low a clock frequency or too low timing. Make sure that this condition only gates dll enablement. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-5-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add Support for SR2.0Faiz Abbas1-1/+22
Add Support for AM65x PG2.0. Use the SoC bus framework to fixup the driver data and skip do DLL calibration if the revision is 1.0 Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-4-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci_am654: Add flag for PHY calibrationFaiz Abbas1-3/+5
Not all controllers need calibration for the PHY DLL. Add a DLL_CALIB flag to indicate the same. Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-3-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13dt-bindings: mmc: sdhci-am654: Add ti,clkbuf-sel bindingFaiz Abbas1-0/+1
Add documentation for the clock buffer select phy property in the am654x and j721e 4 bit IP Signed-off-by: Faiz Abbas <faiz_abbas@ti.com> Link: https://lore.kernel.org/r/20200619125801.9530-2-faiz_abbas@ti.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13dt-bindings: mmc: Convert pwrseq to json-schemaJisheng Zhang6-72/+147
Convert the pwrseq binding to DT schema format using json-schema. At the same time, fix a couple of issues with the examples discovered by the validation tool -- missing ";" Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20200622164431.3dbc8c5a@xhacker.debian Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sh_mmcif: Use "kHz" for kilohertzGeert Uytterhoeven1-3/+3
"K" stands for "kelvin". While at it, make the spacing before units consistent. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20200618080321.16678-1-geert+renesas@glider.be Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Fix spelling mistakeFlavio Suligoi1-1/+1
Fix typo: "trigered" --> "triggered" Signed-off-by: Flavio Suligoi <f.suligoi@asem.it> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20200617151938.30217-1-f.suligoi@asem.it Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: mmci: add sdio datactrl mask for sdmmc revisionsLudovic Barre1-0/+2
This patch adds datactrl_mask_sdio for sdmmc revisions. sdmmc revisions used same bit of previous ST variant. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Link: https://lore.kernel.org/r/20200611132839.4515-1-ludovic.barre@st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-of-arasan: Add missed checks for devm_clk_register()Chuhong Yuan1-0/+4
These functions do not check the return value of devm_clk_register(): - sdhci_arasan_register_sdcardclk() - sdhci_arasan_register_sampleclk() Therefore, add the missed checks to fix them. Fixes: c390f2110adf1 ("mmc: sdhci-of-arasan: Add ability to export card clock") Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200608162226.3259186-1-hslester96@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Fix 1-bit mode for SD-combo cards during suspendYue Hu1-1/+22
Commit 6b5eda369ac3 ("sdio: put active devices into 1-bit mode during suspend") disabled 4-bit mode during system suspend. After this patch, commit 7310ece86ad7 ("mmc: implement SD-combo (IO+mem) support") used new sdio_enable_4bit_bus() instead of sdio_enable_wide() to support SD-combo cards, also for card resume. However, no corresponding support added during suspend. That is not correct. Let's fix it. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200609081431.6376-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Enable SDIO 4-bit bus if not support SD_SCR_BUS_WIDTH_4 for SD ↵Yue Hu1-14/+12
combo card If the card type is SD combo(MMC_TYPE_SD_COMBO) and the memory part does not support wider bus(SD_SCR_BUS_WIDTH_4), nothing will be done except return 0. However, we should check whether IO part support wider bus or not. We should use available IO ability if supported. In addition, there's a duplicated check to MMC_CAP_4_BIT_DATA since sdio_enable_wide() will include that check. And we can also save one call site to sdio_enable_wide() after this change. Signed-off-by: Yue Hu <huyue2@yulong.com> Link: https://lore.kernel.org/r/20200608103009.5000-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdio: Return ret if sdio_disable_func() failsYue Hu1-1/+1
We should return any possible error returned by mmc_io_rw_direct() rather than only -EIO in sdio_disable_func() failure path. Signed-off-by: Yue Hu <huyue2@yulong.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200604100102.13572-1-zbestahu@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-tegra: Add comment for PADCALIB and PAD_CONTROL NVQUIRKSSowjanya Komatineni1-0/+9
This patch adds comments about NVQUIRKS HAS_PADCALIB and NEEDS_PAD_CONTROL. Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1591326240-28928-1-git-send-email-skomatineni@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13dt-bindings: mmc: sdhci-msm: Add interconnect BW scaling stringsPradeep P V K1-0/+18
Add interconnect bandwidth scaling supported strings for qcom-sdhci controller. Signed-off-by: Pradeep P V K <ppvk@codeaurora.org> Acked-by: Rob Herring <robh@kernel.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/1591691846-7578-3-git-send-email-ppvk@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: sdhci-msm: Add interconnect bandwidth scaling supportPradeep P V K1-0/+6
Interconnect bandwidth scaling support is now added as a part of OPP. So, make sure interconnect driver is ready before handling interconnect scaling. Signed-off-by: Pradeep P V K <ppvk@codeaurora.org> Reviewed-by: Sibi Sankar <sibis@codeaurora.org> Reviewed-by: Matthias Kaehlcke <mka@chromium.org> Link: https://lore.kernel.org/r/1591691846-7578-2-git-send-email-ppvk@codeaurora.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2020-07-13mmc: core: Always allow the card detect uevent to be consumedUlf Hansson3-5/+9
The approach to allow userspace ~5s to consume the uevent, which is triggered when a new card is inserted/initialized, currently requires the mmc host to support system wakeup. This is unnecessary limiting, especially for an mmc host that relies on a GPIO IRQ for card detect. More precisely, the mmc host may not support system wakeup for its corresponding struct device, while the GPIO IRQ still could be configured as a wakeup IRQ via enable_irq_wake(). To support all various cases, let's simply drop the need for the wakeup support. Instead let's always register a wakeup source and activate it for all card detect IRQs by calling __pm_wakeup_event(). Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20200529102341.12529-1-ulf.hansson@linaro.org
2020-07-13Linux 5.8-rc5v5.8-rc5Linus Torvalds1-1/+1
2020-07-12Merge tag 'xtensa-20200712' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds3-6/+5
Pull Xtensa fixes from Max Filippov: - fix __sync_fetch_and_{and,or}_4 declarations to avoid build warning - update *pos in cpuinfo_op.next to avoid runtime warning - use for_each_set_bit in xtensa_pmu_irq_handler instead of open-coding it * tag 'xtensa-20200712' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: simplify xtensa_pmu_irq_handler xtensa: update *pos in cpuinfo_op.next xtensa: fix __sync_fetch_and_{and,or}_4 declarations
2020-07-12Merge tag 'io_uring-5.8-2020-07-12' of git://git.kernel.dk/linux-blockLinus Torvalds1-1/+4
Pull io_uring fixes from Jens Axboe: "Two late fixes again: - Fix missing msg_name assignment in certain cases (Pavel) - Correct a previous fix for full coverage (Pavel)" * tag 'io_uring-5.8-2020-07-12' of git://git.kernel.dk/linux-block: io_uring: fix not initialised work->flags io_uring: fix missing msg_name assignment
2020-07-12Merge tag 'for-5.8-rc4-tag' of ↵Linus Torvalds3-8/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Two refcounting fixes and one prepartory patch for upcoming splice cleanup: - fix double put of block group with nodatacow - fix missing block group put when remounting with discard=async - explicitly set splice callback (no functional change), to ease integrating splice cleanup patches" * tag 'for-5.8-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: wire up iter_file_splice_write btrfs: fix double put of block group with nocow btrfs: discard: add missing put when grabbing block group from unused list
2020-07-12io_uring: fix not initialised work->flagsPavel Begunkov1-1/+2
59960b9deb535 ("io_uring: fix lazy work init") tried to fix missing io_req_init_async(), but left out work.flags and hash. Do it earlier. Fixes: 7cdaf587de7c ("io_uring: avoid whole io_wq_work copy for requests completed inline") Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-12io_uring: fix missing msg_name assignmentPavel Begunkov1-0/+2
Ensure to set msg.msg_name for the async portion of send/recvmsg, as the header copy will copy to/from it. Cc: stable@vger.kernel.org # v5.5+ Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2020-07-12Merge tag 'riscv-for-linus-5.8-rc5' of ↵Linus Torvalds7-9/+41
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Palmer Dabbelt: "I have a few KGDB-related fixes. They're mostly fixes for build warnings, but there's also: - Support for the qSupported and qXfer packets, which are necessary to pass around GDB XML information which we need for the RISC-V GDB port to fully function. - Users can now select STRICT_KERNEL_RWX instead of forcing it on" * tag 'riscv-for-linus-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: Avoid kgdb.h including gdb_xml.h to solve unused-const-variable warning kgdb: Move the extern declaration kgdb_has_hit_break() to generic kgdb.h riscv: Fix "no previous prototype" compile warning in kgdb.c file riscv: enable the Kconfig prompt of STRICT_KERNEL_RWX kgdb: enable arch to support XML packet.
2020-07-12Merge tag 'scsi-fixes' of ↵Linus Torvalds6-8/+12
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Five small fixes, four in driver and one in the SCSI Parallel transport, which fixes an incredibly old bug so I suspect no-one has actually used the functionality it fixes" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: dh: Add Fujitsu device to devinfo and dh lists scsi: mpt3sas: Fix error returns in BRM_status_show scsi: mpt3sas: Fix unlock imbalance scsi: iscsi: Change iSCSI workqueue max_active back to 1 scsi: scsi_transport_spi: Fix function pointer check
2020-07-11Merge tag 'for-linus-5.8b-rc5-tag' of ↵Linus Torvalds1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "Just one fix of a recent patch (double free in an error path)" * tag 'for-linus-5.8b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/xenbus: Fix a double free in xenbus_map_ring_pv()
2020-07-11Merge tag 'powerpc-5.8-6' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: "One fix for a crash/soft lockup on Power8, caused by the exception rework we did in v5.7. Thanks to Paul Menzel and Nicholas Piggin" * tag 'powerpc-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s/exception: Fix 0x1500 interrupt handler crash
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-21 22:41:19 +0300