summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-10-22block: avoid to merge splitted bioMing Lei1-0/+3
The splitted bio has been already too fat to merge, so mark it as NOMERGE. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-22block: setup bi_phys_segments after splittingMing Lei1-7/+22
The number of bio->bi_phys_segments is always obtained during bio splitting, so it is natural to setup it just after bio splitting, then we can avoid to compute nr_segment again during merge. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-22block: fix plug list flushing for nomerge queuesJeff Moyer3-6/+36
Request queues with merging disabled will not flush the plug list after BLK_MAX_REQUEST_COUNT requests have been queued, since the code relies on blk_attempt_plug_merge to compute the request_count. Fix this by computing the number of queued requests even for nomerge queues. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-09blk-mq: remove unused blk_mq_clone_flush_request prototypeChristoph Hellwig1-2/+0
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-09blk-mq: fix waitqueue_active without memory barrier in block/blk-mq-tag.cKosuke Tatsukawa1-0/+4
blk_mq_tag_update_depth() seems to be missing a memory barrier which might cause the waker to not notice the waiter and fail to send a wake_up as in the following figure. blk_mq_tag_update_depth bt_get ------------------------------------------------------------------------ if (waitqueue_active(&bs->wait)) /* The CPU might reorder the test for the waitqueue up here, before prior writes complete */ prepare_to_wait(&bs->wait, &wait, TASK_UNINTERRUPTIBLE); tag = __bt_get(hctx, bt, last_tag, tags); /* Value set in bt_update_count not visible yet */ bt_update_count(&tags->bitmap_tags, tdepth); /* blk_mq_tag_wakeup_all(tags, false); */ bt = &tags->bitmap_tags; wake_index = atomic_read(&bt->wake_index); ... io_schedule(); ------------------------------------------------------------------------ This patch adds the missing memory barrier. I found this issue when I was looking through the linux source code for places calling waitqueue_active() before wake_up*(), but without preceding memory barriers, after sending a patch to fix a similar issue in drivers/tty/n_tty.c (Details about the original issue can be found here: https://lkml.org/lkml/2015/9/28/849). Signed-off-by: Kosuke Tatsukawa <tatsu@ab.jp.nec.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-10-09Merge tag 'v4.3-rc4' into for-4.4/coreJens Axboe690-3957/+7244
Linux 4.3-rc4 Pulling in v4.3-rc4 to avoid conflicts with NVMe fixes that have gone in since for-4.4/core was based.
2015-10-04Linux 4.3-rc4v4.3-rc4Linus Torvalds1-1/+1
2015-10-04Merge branch 'strscpy' of ↵Linus Torvalds25-37/+188
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull strscpy string copy function implementation from Chris Metcalf. Chris sent this during the merge window, but I waffled back and forth on the pull request, which is why it's going in only now. The new "strscpy()" function is definitely easier to use and more secure than either strncpy() or strlcpy(), both of which are horrible nasty interfaces that have serious and irredeemable problems. strncpy() has a useless return value, and doesn't NUL-terminate an overlong result. To make matters worse, it pads a short result with zeroes, which is a performance disaster if you have big buffers. strlcpy(), by contrast, is a mis-designed "fix" for strlcpy(), lacking the insane NUL padding, but having a differently broken return value which returns the original length of the source string. Which means that it will read characters past the count from the source buffer, and you have to trust the source to be properly terminated. It also makes error handling fragile, since the test for overflow is unnecessarily subtle. strscpy() avoids both these problems, guaranteeing the NUL termination (but not excessive padding) if the destination size wasn't zero, and making the overflow condition very obvious by returning -E2BIG. It also doesn't read past the size of the source, and can thus be used for untrusted source data too. So why did I waffle about this for so long? Every time we introduce a new-and-improved interface, people start doing these interminable series of trivial conversion patches. And every time that happens, somebody does some silly mistake, and the conversion patch to the improved interface actually makes things worse. Because the patch is mindnumbing and trivial, nobody has the attention span to look at it carefully, and it's usually done over large swatches of source code which means that not every conversion gets tested. So I'm pulling the strscpy() support because it *is* a better interface. But I will refuse to pull mindless conversion patches. Use this in places where it makes sense, but don't do trivial patches to fix things that aren't actually known to be broken. * 'strscpy' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: tile: use global strscpy() rather than private copy string: provide strscpy() Make asm/word-at-a-time.h available on all architectures
2015-10-04Merge tag 'md/4.3-fixes' of git://neil.brown.name/mdLinus Torvalds7-26/+28
Pull md fixes from Neil Brown: "Assorted fixes for md in 4.3-rc. Two tagged for -stable, and one is really a cleanup to match and improve kmemcache interface. * tag 'md/4.3-fixes' of git://neil.brown.name/md: md/bitmap: don't pass -1 to bitmap_storage_alloc. md/raid1: Avoid raid1 resync getting stuck md: drop null test before destroy functions md: clear CHANGE_PENDING in readonly array md/raid0: apply base queue limits *before* disk_stack_limits md/raid5: don't index beyond end of array in need_this_block(). raid5: update analysis state for failed stripe md: wait for pending superblock updates before switching to read-only
2015-10-04Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds13-144/+82
Pull MIPS updates from Ralf Baechle: "This week's round of MIPS fixes: - Fix JZ4740 build - Fix fallback to GFP_DMA - FP seccomp in case of ENOSYS - Fix bootmem panic - A number of FP and CPS fixes - Wire up new syscalls - Make sure BPF assembler objects can properly be disassembled - Fix BPF assembler code for MIPS I" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: scall: Always run the seccomp syscall filters MIPS: Octeon: Fix kernel panic on startup from memory corruption MIPS: Fix R2300 FP context switch handling MIPS: Fix octeon FP context switch handling MIPS: BPF: Fix load delay slots. MIPS: BPF: Do all exports of symbols with FEXPORT(). MIPS: Fix the build on jz4740 after removing the custom gpio.h MIPS: CPS: #ifdef on CONFIG_MIPS_MT_SMP rather than CONFIG_MIPS_MT MIPS: CPS: Don't include MT code in non-MT kernels. MIPS: CPS: Stop dangling delay slot from has_mt. MIPS: dma-default: Fix 32-bit fall back to GFP_DMA MIPS: Wire up userfaultfd and membarrier syscalls.
2015-10-04Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds3-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "This update contains: - Fix for a long standing race affecting /proc/irq/NNN - One line fix for ARM GICV3-ITS counting the wrong data - Warning silencing in ARM GICV3-ITS. Another GCC trying to be overly clever issue" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Count additional LPIs for the aliased devices irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlined genirq: Fix race in register_irq_proc()
2015-10-04MIPS: scall: Always run the seccomp syscall filtersMarkos Chandras4-73/+42
The MIPS syscall handler code used to return -ENOSYS on invalid syscalls. Whilst this is expected, it caused problems for seccomp filters because the said filters never had the change to run since the code returned -ENOSYS before triggering them. This caused problems on the chromium testsuite for filters looking for invalid syscalls. This has now changed and the seccomp filters are always run even if the syscall is invalid. We return -ENOSYS once we return from the seccomp filters. Moreover, similar codepaths have been merged in the process which simplifies somewhat the overall syscall code. Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/11236/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds9-65/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Fixes all around the map: W+X kernel mapping fix, WCHAN fixes, two build failure fixes for corner case configs, x32 header fix and a speling fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/headers/uapi: Fix __BITS_PER_LONG value for x32 builds x86/mm: Set NX on gap between __ex_table and rodata x86/kexec: Fix kexec crash in syscall kexec_file_load() x86/process: Unify 32bit and 64bit implementations of get_wchan() x86/process: Add proper bound checks in 64bit get_wchan() x86, efi, kasan: Fix build failure on !KASAN && KMEMCHECK=y kernels x86/hyperv: Fix the build in the !CONFIG_KEXEC_CORE case x86/cpufeatures: Correct spelling of the HWP_NOTIFY flag
2015-10-03Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds3-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fixes from Ingo Molnar: "An abs64() fix in the watchdog driver, and two clocksource driver NO_IRQ assumption fixes" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Fix abs() usage w/ 64bit values clocksource/drivers/keystone: Fix bad NO_IRQ usage clocksource/drivers/rockchip: Fix bad NO_IRQ usage
2015-10-03Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds3-17/+141
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull EFI fixes from Ingo Molnar: "Two EFI fixes: one for x86, one for ARM, fixing a boot crash bug that can trigger under newer EFI firmware" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: arm64/efi: Fix boot crash by not padding between EFI_MEMORY_RUNTIME regions x86/efi: Fix boot crash by mapping EFI memmap entries bottom-up at runtime, instead of top-down
2015-10-03Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds34-300/+227
Pull drm fixes from Dave Airlie: "Bunch of fixes all over the place, all pretty small: amdgpu, i915, exynos, one qxl and one vmwgfx. There is also a bunch of mst fixes, I left some cleanups in the series as I didn't think it was worth splitting up the tested series" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (37 commits) drm/dp/mst: add some defines for logical/physical ports drm/dp/mst: drop cancel work sync in the mstb destroy path (v2) drm/dp/mst: split connector registration into two parts (v2) drm/dp/mst: update the link_address_sent before sending the link address (v3) drm/dp/mst: fixup handling hotplug on port removal. drm/dp/mst: don't pass port into the path builder function drm/radeon: drop radeon_fb_helper_set_par drm: handle cursor_set2 in restore_fbdev_mode drm/exynos: Staticize local function in exynos_drm_gem.c drm/exynos: fimd: actually disable dp clock drm/exynos: dp: remove suspend/resume functions drm/qxl: recreate the primary surface when the bo is not primary drm/amdgpu: only print meaningful VM faults drm/amdgpu/cgs: remove import_gpu_mem drm/i915: Call non-locking version of drm_kms_helper_poll_enable(), v2 drm: Add a non-locking version of drm_kms_helper_poll_enable(), v2 drm/vmwgfx: Fix a command submission hang regression drm/exynos: remove unused mode_fixup() code drm/exynos: remove decon_mode_fixup() drm/exynos: remove fimd_mode_fixup() ...
2015-10-03Merge branch 'for-linus' of ↵Linus Torvalds15-49/+74
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input layer fixes from Dmitry Torokhov: "Fixes for two recent regressions (in Synaptics PS/2 and uinput drivers) and some more driver fixups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Revert "Input: synaptics - fix handling of disabling gesture mode" Input: psmouse - fix data race in __ps2_command Input: elan_i2c - add all valid ic type for i2c/smbus Input: zhenhua - ensure we have BITREVERSE Input: omap4-keypad - fix memory leak Input: serio - fix blocking of parport Input: uinput - fix crash when using ABS events Input: elan_i2c - expand maximum product_id form 0xFF to 0xFFFF Input: elan_i2c - add ic type 0x03 Input: elan_i2c - don't require known iap version Input: imx6ul_tsc - fix controller name Input: imx6ul_tsc - use the preferred method for kzalloc() Input: imx6ul_tsc - check for negative return value Input: imx6ul_tsc - propagate the errors Input: walkera0701 - fix abs() calculations on 64 bit values Input: mms114 - remove unneded semicolons Input: pm8941-pwrkey - remove unneded semicolon Input: fix typo in MT documentation Input: cyapa - fix address of Gen3 devices in device tree documentation
2015-10-02clocksource: Fix abs() usage w/ 64bit valuesJohn Stultz1-1/+1
This patch fixes one cases where abs() was being used with 64-bit nanosecond values, where the result may be capped at 32-bits. This potentially could cause watchdog false negatives on 32-bit systems, so this patch addresses the issue by using abs64(). Signed-off-by: John Stultz <john.stultz@linaro.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: http://lkml.kernel.org/r/1442279124-7309-2-git-send-email-john.stultz@linaro.org Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02Merge tag 'arm64-fixes' of ↵Linus Torvalds2-4/+22
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - Fix for transparent huge page change_protection() logic which was inadvertently changing a huge pmd page into a pmd table entry. - Function graph tracer panic fix caused by the return_to_handler code corrupting the multi-regs function return value (composite types). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: ftrace: fix function_graph tracer panic arm64: Fix THP protection change logic
2015-10-02Merge branch 'for-linus' of ↵Linus Torvalds16-14/+165
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: "Summary: - Fix for accidental modification of arguments of syscall functions - Wire up new syscalls - Update defconfigs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/defconfig: Update defconfigs for v4.3-rc1 m68k: Define asmlinkage_protect m68k: Wire up membarrier m68k: Wire up userfaultfd m68k: Wire up direct socket calls
2015-10-02irqchip/gic-v3-its: Count additional LPIs for the aliased devicesMarc Zyngier1-1/+1
When configuring the interrupt mapping for a new device, we iterate over all the possible aliases to account for their maximum MSI allocation. This was introduced by e8137f4f5088 ("irqchip: gicv3-its: Iterate over PCI aliases to generate ITS configuration"). Turns out that the code doing that is a bit braindead, and repeatedly accounts for the same device over and over. Fix this by counting the actual alias that is passed to us by the core code. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Alex Shi <alex.shi@linaro.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02irqchip/gic-v3-its: Silence warning when its_lpi_alloc_chunks gets inlinedMarc Zyngier1-0/+3
More agressive inlining in recent versions of GCC have uncovered a new set of warnings: drivers/irqchip/irq-gic-v3-its.c: In function its_msi_prepare: drivers/irqchip/irq-gic-v3-its.c:1148:26: warning: lpi_base may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.lpi_base = lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1116:6: note: lpi_base was declared here int lpi_base; ^ drivers/irqchip/irq-gic-v3-its.c:1149:25: warning: nr_lpis may be used uninitialized in this function [-Wmaybe-uninitialized] dev->event_map.nr_lpis = nr_lpis; ^ drivers/irqchip/irq-gic-v3-its.c:1117:6: note: nr_lpis was declared here int nr_lpis; ^ The warning is fairly benign (there is no code path that could actually use uninitialized variables), but let's silence it anyway by zeroing the variables on the error path. Reported-by: Alex Shi <alex.shi@linaro.org> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: David Daney <ddaney.cavm@gmail.com> Cc: Jason Cooper <jason@lakedaemon.net> Link: http://lkml.kernel.org/r/1443800646-8074-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-10-02Merge tag 'dmaengine-fix-4.3-rc4' of ↵Linus Torvalds8-53/+77
git://git.infradead.org/users/vkoul/slave-dma Pull dmaengine fixes from Vinod Koul: "This contains fixes spread throughout the drivers, and also fixes one more instance of privatecnt in dmaengine. Driver fixes summary: - bunch of pxa_dma fixes for reuse of descriptor issue, residue and no-requestor - odd fixes in xgene, idma, sun4i and zxdma - at_xdmac fixes for cleaning descriptor and block addr mode" * tag 'dmaengine-fix-4.3-rc4' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: pxa_dma: fix residue corner case dmaengine: pxa_dma: fix the no-requestor case dmaengine: zxdma: Fix off-by-one for testing valid pchan request dmaengine: at_xdmac: clean used descriptor dmaengine: at_xdmac: change block increment addressing mode dmaengine: dw: properly read DWC_PARAMS register dmaengine: xgene-dma: Fix overwritting DMA tx ring dmaengine: fix balance of privatecnt dmaengine: sun4i: fix unsafe list iteration dmaengine: idma64: improve residue estimation dmaengine: xgene-dma: fix handling xgene_dma_get_ring_size result dmaengine: pxa_dma: fix initial list move
2015-10-02Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds15-133/+193
Pull block fixes from Jens Axboe: "Another week, another round of fixes. These have been brewing for a bit and in various iterations, but I feel pretty comfortable about the quality of them. They fix real issues. The pull request is mostly blk-mq related, and the only one not fixing a real bug, is the tag iterator abstraction from Christoph. But it's pretty trivial, and we'll need it for another fix soon. Apart from the blk-mq fixes, there's an NVMe affinity fix from Keith, and a single fix for xen-blkback from Roger fixing failure to free requests on disconnect" * 'for-linus' of git://git.kernel.dk/linux-block: blk-mq: factor out a helper to iterate all tags for a request_queue blk-mq: fix racy updates of rq->errors blk-mq: fix deadlock when reading cpu_list blk-mq: avoid inserting requests before establishing new mapping blk-mq: fix q->mq_usage_counter access race blk-mq: Fix use after of free q->mq_map blk-mq: fix sysfs registration/unregistration race blk-mq: avoid setting hctx->tags->cpumask before allocation NVMe: Set affinity after allocating request queues xen/blkback: free requests on disconnection
2015-10-02Revert "Input: synaptics - fix handling of disabling gesture mode"Dmitry Torokhov1-8/+4
This reverts commit e51e38494a8ecc18650efb0c840600637891de2c: we actually do want the device to work in extended W mode, as this is the mode that allows us receiving multiple contact information. Cc: stable@vger.kernel.org
2015-10-02MIPS: Octeon: Fix kernel panic on startup from memory corruptionMatt Bennett1-1/+1
During development it was found that a number of builds would panic during the kernel init process, more specifically in 'delayed_fput()'. The panic showed the kernel trying to access a memory address of '0xb7fdc00' while traversing the 'delayed_fput_list' structure. Comparing this memory address to the value of the pointer used on builds that did not panic confirmed that the pointer on crashing builds must have been corrupted at some stage earlier in the init process. By traversing the list earlier and earlier in the code it was found that 'plat_mem_setup()' was responsible for corrupting the list. Specifically the line: memory = cvmx_bootmem_phy_alloc(mem_alloc_size, __pa_symbol(&__init_end), -1, 0x100000, CVMX_BOOTMEM_FLAG_NO_LOCKING); Which would eventually call: cvmx_bootmem_phy_set_size(new_ent_addr, cvmx_bootmem_phy_get_size (ent_addr) - (desired_min_addr - ent_addr)); Where 'new_ent_addr'=0x4800000 (the address of 'delayed_fput_list') and the second argument (size)=0xb7fdc00 (the address causing the kernel panic). The job of this part of 'plat_mem_setup()' is to allocate chunks of memory for the kernel to use. At the start of each chunk of memory the size of the chunk is written, hence the value 0xb7fdc00 is written onto memory at 0x4800000, therefore the kernel panics when it goes back to access 'delayed_fput_list' later on in the initialisation process. On builds that were not crashing it was found that the compiler had placed 'delayed_fput_list' at 0x4800008, meaning it wasn't corrupted (but something else in memory was overwritten). As can be seen in the first function call above the code begins to allocate chunks of memory beginning from the symbol '__init_end'. The MIPS linker script (vmlinux.lds.S) however defines the .bss section to begin after '__init_end'. Therefore memory within the .bss section is allocated to the kernel to use (System.map shows 'delayed_fput_list' and other kernel structures to be in .bss). To stop the kernel panic (and the .bss section being corrupted) memory should begin being allocated from the symbol '_end'. Signed-off-by: Matt Bennett <matt.bennett@alliedtelesis.co.nz> Acked-by: David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: aleksey.makarov@auriga.com Patchwork: https://patchwork.linux-mips.org/patch/11251/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02MIPS: Fix R2300 FP context switch handlingPaul Burton1-27/+1
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Remove it from the r2300_switch.S implementation too in order to prevent attempting to save the FP context twice, which would likely lead to an exception from the second save because the FPU had already been disabled by the first save. This patch has only been build tested, using rbtx49xx_defconfig. Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-kernel@vger.kernel.org Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: https://patchwork.linux-mips.org/patch/11167/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02MIPS: Fix octeon FP context switch handlingPaul Burton1-25/+1
Commit 1a3d59579b9f ("MIPS: Tidy up FPU context switching") removed FP context saving from the asm-written resume function in favour of reusing existing code to perform the same task. However it only removed the FP context saving code from the r4k_switch.S implementation of resume. Octeon uses its own implementation in octeon_switch.S, so remove FP context saving there too in order to prevent attempting to save context twice. That formerly led to an exception from the second save as follows because the FPU had already been disabled by the first save: do_cpu invoked from kernel context![#1]: CPU: 0 PID: 2 Comm: kthreadd Not tainted 4.3.0-rc2-dirty #2 task: 800000041f84a008 ti: 800000041f864000 task.ti: 800000041f864000 $ 0 : 0000000000000000 0000000010008ce1 0000000000100000 ffffffffbfffffff $ 4 : 800000041f84a008 800000041f84ac08 800000041f84c000 0000000000000004 $ 8 : 0000000000000001 0000000000000000 0000000000000000 0000000000000001 $12 : 0000000010008ce3 0000000000119c60 0000000000000036 800000041f864000 $16 : 800000041f84ac08 800000000792ce80 800000041f84a008 ffffffff81758b00 $20 : 0000000000000000 ffffffff8175ae50 0000000000000000 ffffffff8176c740 $24 : 0000000000000006 ffffffff81170300 $28 : 800000041f864000 800000041f867d90 0000000000000000 ffffffff815f3fa0 Hi : 0000000000fa8257 Lo : ffffffffe15cfc00 epc : ffffffff8112821c resume+0x9c/0x200 ra : ffffffff815f3fa0 __schedule+0x3f0/0x7d8 Status: 10008ce2 KX SX UX KERNEL EXL Cause : 1080002c (ExcCode 0b) PrId : 000d0601 (Cavium Octeon+) Modules linked in: Process kthreadd (pid: 2, threadinfo=800000041f864000, task=800000041f84a008, tls=0000000000000000) Stack : ffffffff81604218 ffffffff815f7e08 800000041f84a008 ffffffff811681b0 800000041f84a008 ffffffff817e9878 0000000000000000 ffffffff81770000 ffffffff81768340 ffffffff81161398 0000000000000001 0000000000000000 0000000000000000 ffffffff815f4424 0000000000000000 ffffffff81161d68 ffffffff81161be8 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ffffffff8111e16c 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 0000000000000000 ... Call Trace: [<ffffffff8112821c>] resume+0x9c/0x200 [<ffffffff815f3fa0>] __schedule+0x3f0/0x7d8 [<ffffffff815f4424>] schedule+0x34/0x98 [<ffffffff81161d68>] kthreadd+0x180/0x198 [<ffffffff8111e16c>] ret_from_kernel_thread+0x14/0x1c Tested using cavium_octeon_defconfig on an EdgeRouter Lite. Fixes: 1a3d59579b9f ("MIPS: Tidy up FPU context switching") Reported-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: linux-kernel@vger.kernel.org Cc: Chandrakala Chavva <cchavva@caviumnetworks.com> Cc: David Daney <david.daney@cavium.com> Cc: Leonid Rosenboim <lrosenboim@caviumnetworks.com> Patchwork: https://patchwork.linux-mips.org/patch/11166/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02Merge tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds4-62/+67
Pull MMC fixes from Ulf Hansson: "Here are some mmc fixes intended for v4.3 rc4: MMC core: - Allow users of mmc_of_parse() to succeed when CONFIG_GPIOLIB is unset - Prevent infinite loop of re-tuning for CRC-errors for CMD19 and CMD21 MMC host: - pxamci: Fix issues with card detect - sunxi: Fix clk-delay settings" * tag 'mmc-v4.3-rc3' of git://git.linaro.org/people/ulf.hansson/mmc: mmc: core: fix dead loop of mmc_retune mmc: pxamci: fix card detect with slot-gpio API mmc: sunxi: Fix clk-delay settings mmc: core: Don't return an error for CD/WP GPIOs when GPIOLIB is unset
2015-10-02Merge git://git.infradead.org/intel-iommuLinus Torvalds4-57/+77
Pull IOVA fixes from David Woodhouse: "The main fix here is the first one, fixing the over-allocation of size-aligned requests. The other patches simply make the existing IOVA code available to users other than the Intel VT-d driver, with no functional change. I concede the latter really *should* have been submitted during the merge window, but since it's basically risk-free and people are waiting to build on top of it and it's my fault I didn't get it in, I (and they) would be grateful if you'd take it" * git://git.infradead.org/intel-iommu: iommu: Make the iova library a module iommu: iova: Export symbols iommu: iova: Move iova cache management to the iova library iommu/iova: Avoid over-allocating when size-aligned
2015-10-02arm64: ftrace: fix function_graph tracer panicLi Bin1-2/+20
When function graph tracer is enabled, the following operation will trigger panic: mount -t debugfs nodev /sys/kernel echo next_tgid > /sys/kernel/tracing/set_ftrace_filter echo function_graph > /sys/kernel/tracing/current_tracer ls /proc/ ------------[ cut here ]------------ [ 198.501417] Unable to handle kernel paging request at virtual address cb88537fdc8ba316 [ 198.506126] pgd = ffffffc008f79000 [ 198.509363] [cb88537fdc8ba316] *pgd=00000000488c6003, *pud=00000000488c6003, *pmd=0000000000000000 [ 198.517726] Internal error: Oops: 94000005 [#1] SMP [ 198.518798] Modules linked in: [ 198.520582] CPU: 1 PID: 1388 Comm: ls Tainted: G [ 198.521800] Hardware name: linux,dummy-virt (DT) [ 198.522852] task: ffffffc0fa9e8000 ti: ffffffc0f9ab0000 task.ti: ffffffc0f9ab0000 [ 198.524306] PC is at next_tgid+0x30/0x100 [ 198.525205] LR is at return_to_handler+0x0/0x20 [ 198.526090] pc : [<ffffffc0002a1070>] lr : [<ffffffc0000907c0>] pstate: 60000145 [ 198.527392] sp : ffffffc0f9ab3d40 [ 198.528084] x29: ffffffc0f9ab3d40 x28: ffffffc0f9ab0000 [ 198.529406] x27: ffffffc000d6a000 x26: ffffffc000b786e8 [ 198.530659] x25: ffffffc0002a1900 x24: ffffffc0faf16c00 [ 198.531942] x23: ffffffc0f9ab3ea0 x22: 0000000000000002 [ 198.533202] x21: ffffffc000d85050 x20: 0000000000000002 [ 198.534446] x19: 0000000000000002 x18: 0000000000000000 [ 198.535719] x17: 000000000049fa08 x16: ffffffc000242efc [ 198.537030] x15: 0000007fa472b54c x14: ffffffffff000000 [ 198.538347] x13: ffffffc0fada84a0 x12: 0000000000000001 [ 198.539634] x11: ffffffc0f9ab3d70 x10: ffffffc0f9ab3d70 [ 198.540915] x9 : ffffffc0000907c0 x8 : ffffffc0f9ab3d40 [ 198.542215] x7 : 0000002e330f08f0 x6 : 0000000000000015 [ 198.543508] x5 : 0000000000000f08 x4 : ffffffc0f9835ec0 [ 198.544792] x3 : cb88537fdc8ba316 x2 : cb88537fdc8ba306 [ 198.546108] x1 : 0000000000000002 x0 : ffffffc000d85050 [ 198.547432] [ 198.547920] Process ls (pid: 1388, stack limit = 0xffffffc0f9ab0020) [ 198.549170] Stack: (0xffffffc0f9ab3d40 to 0xffffffc0f9ab4000) [ 198.582568] Call trace: [ 198.583313] [<ffffffc0002a1070>] next_tgid+0x30/0x100 [ 198.584359] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.585503] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.586574] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.587660] [<ffffffc0000907bc>] ftrace_graph_caller+0x6c/0x70 [ 198.588896] Code: aa0003f5 2a0103f4 b4000102 91004043 (885f7c60) [ 198.591092] ---[ end trace 6a346f8f20949ac8 ]--- This is because when using function graph tracer, if the traced function return value is in multi regs ([x0-x7]), return_to_handler may corrupt them. So in return_to_handler, the parameter regs should be protected properly. Cc: <stable@vger.kernel.org> # 3.18+ Signed-off-by: Li Bin <huawei.libin@huawei.com> Acked-by: AKASHI Takahiro <takahiro.akashi@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-10-02MIPS: BPF: Fix load delay slots.Ralf Baechle1-0/+4
The entire bpf_jit_asm.S is written in noreorder mode because "we know better" according to a comment. This also prevented the assembler from throwing in the required NOPs for MIPS I processors which have no load-use interlock, thus the load's consumer might end up using the old value of the register from prior to the load. Fixed by putting the assembler in reorder mode for just the affected load instructions. This is not enough for gas to actually try to be clever by looking at the next instruction and inserting a nop only when needed but as the comment said "we know better", so getting gas to unconditionally emit a NOP is just right in this case and prevents adding further ifdefery. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-10-02x86/headers/uapi: Fix __BITS_PER_LONG value for x32 buildsBen Hutchings1-1/+1
On x32, gcc predefines __x86_64__ but long is only 32-bit. Use __ILP32__ to distinguish x32. Fixes this compiler error in perf: tools/include/asm-generic/bitops/__ffs.h: In function '__ffs': tools/include/asm-generic/bitops/__ffs.h:19:8: error: right shift count >= width of type [-Werror=shift-count-overflow] word >>= 32; ^ This isn't sufficient to build perf for x32, though. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443660043.2730.15.camel@decadent.org.uk Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-02md/bitmap: don't pass -1 to bitmap_storage_alloc.NeilBrown1-1/+2
Passing -1 to bitmap_storage_alloc() causes page->index to be set to -1, which is quite problematic. So only pass ->cluster_slot if mddev_is_clustered(). Fixes: b97e92574c0b ("Use separate bitmaps for each nodes in the cluster") Cc: stable@vger.kernel.org (v4.1+) Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md/raid1: Avoid raid1 resync getting stuckJes Sorensen1-3/+2
close_sync() needs to set conf->next_resync to a large, but safe value below MaxSector and use it to determine whether or not to set start_next_window in wait_barrier() Solution suggested by Neil Brown. Reported-by: Nate Dailey <nate.dailey@stratus.com> Tested-by: Xiao Ni <xni@redhat.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md: drop null test before destroy functionsJulia Lawall4-14/+7
Remove unneeded NULL test. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression x; @@ -if (x != NULL) \(kmem_cache_destroy\|mempool_destroy\|dma_pool_destroy\)(x); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md: clear CHANGE_PENDING in readonly arrayShaohua Li1-0/+1
If faulty disks of an array are more than allowed degraded number, the array enters error handling. It will be marked as read-only with MD_CHANGE_PENDING/RECOVERY_NEEDED set. But currently recovery doesn't clear CHANGE_PENDING bit for read-only array. If MD_CHANGE_PENDING is set for a raid5 array, all returned IO will be hold on a list till the bit is clear. But recovery nevery clears this bit, the IO is always in pending state and nevery finish. This has bad effects like upper layer can't get an IO error and the array can't be stopped. Fixes: c3cce6cda162 ("md/raid5: ensure device failure recorded before write request returns.") Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md/raid0: apply base queue limits *before* disk_stack_limitsNeilBrown1-6/+6
Calling e.g. blk_queue_max_hw_sectors() after calls to disk_stack_limits() discards the settings determined by disk_stack_limits(). So we need to make those calls first. Fixes: 199dc6ed5179 ("md/raid0: update queue parameter in a safer location.") Cc: stable@vger.kernel.org (v2.6.35+ - please apply with 199dc6ed5179). Reported-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md/raid5: don't index beyond end of array in need_this_block().NeilBrown1-2/+2
When need_this_block probably shouldn't be called when there are more than 2 failed devices, we really don't want it to try indexing beyond the end of the failed_num[] of fdev[] arrays. So limit the loops to at most 2 iterations. Reported-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.de>
2015-10-02raid5: update analysis state for failed stripeShaohua Li1-0/+4
handle_failed_stripe() makes the stripe fail, eg, all IO will return with a failure, but it doesn't update stripe_head_state. Later handle_stripe() has special handling for raid6 for handle_stripe_fill(). That check before handle_stripe_fill() doesn't skip the failed stripe and we get a kernel crash in need_this_block. This patch clear the analysis state to make sure no functions wrongly called after handle_failed_stripe() Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02md: wait for pending superblock updates before switching to read-onlyNeilBrown1-0/+4
If a superblock update is pending, wait for it to complete before letting md_set_readonly() switch to readonly. Otherwise we might lose important information about a device having failed. For external arrays, waiting for superblock updates can wait on user-space, so in that case, just return an error. Reported-and-tested-by: Shaohua Li <shli@fb.com> Signed-off-by: NeilBrown <neilb@suse.com>
2015-10-02x86/mm: Set NX on gap between __ex_table and rodataStephen Smalley1-1/+1
Unused space between the end of __ex_table and the start of rodata can be left W+x in the kernel page tables. Extend the setting of the NX bit to cover this gap by starting from text_end rather than rodata_start. Before: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB x pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd After: ---[ High Kernel Mapping ]--- 0xffffffff80000000-0xffffffff81000000 16M pmd 0xffffffff81000000-0xffffffff81600000 6M ro PSE GLB x pmd 0xffffffff81600000-0xffffffff81754000 1360K ro GLB x pte 0xffffffff81754000-0xffffffff81800000 688K RW GLB NX pte 0xffffffff81800000-0xffffffff81a00000 2M ro PSE GLB NX pmd 0xffffffff81a00000-0xffffffff81b3b000 1260K ro GLB NX pte 0xffffffff81b3b000-0xffffffff82000000 4884K RW GLB NX pte 0xffffffff82000000-0xffffffff82200000 2M RW PSE GLB NX pmd 0xffffffff82200000-0xffffffffa0000000 478M pmd Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: Kees Cook <keescook@chromium.org> Cc: <stable@vger.kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1443704662-3138-1-git-send-email-sds@tycho.nsa.gov Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-02x86/kexec: Fix kexec crash in syscall kexec_file_load()Lee, Chun-Yi1-4/+3
The original bug is a page fault crash that sometimes happens on big machines when preparing ELF headers: BUG: unable to handle kernel paging request at ffffc90613fc9000 IP: [<ffffffff8103d645>] prepare_elf64_ram_headers_callback+0x165/0x260 The bug is caused by us under-counting the number of memory ranges and subsequently not allocating enough ELF header space for them. The bug is typically masked on smaller systems, because the ELF header allocation is rounded up to the next page. This patch modifies the code in fill_up_crash_elf_data() by using walk_system_ram_res() instead of walk_system_ram_range() to correctly count the max number of crash memory ranges. That's because the walk_system_ram_range() filters out small memory regions that reside in the same page, but walk_system_ram_res() does not. Here's how I found the bug: After tracing prepare_elf64_headers() and prepare_elf64_ram_headers_callback(), the code uses walk_system_ram_res() to fill-in crash memory regions information to the program header, so it counts those small memory regions that reside in a page area. But, when the kernel was using walk_system_ram_range() in fill_up_crash_elf_data() to count the number of crash memory regions, it filters out small regions. I printed those small memory regions, for example: kexec: Get nr_ram ranges. vaddr=0xffff880077592258 paddr=0x77592258, sz=0xdc0 Based on the code in walk_system_ram_range(), this memory region will be filtered out: pfn = (0x77592258 + 0x1000 - 1) >> 12 = 0x77593 end_pfn = (0x77592258 + 0xfc0 -1 + 1) >> 12 = 0x77593 end_pfn - pfn = 0x77593 - 0x77593 = 0 <=== if (end_pfn > pfn) is FALSE So, the max_nr_ranges that's counted by the kernel doesn't include small memory regions - causing us to under-allocate the required space. That causes the page fault crash that happens in a later code path when preparing ELF headers. This bug is not easy to reproduce on small machines that have few CPUs, because the allocated page aligned ELF buffer has more free space to cover those small memory regions' PT_LOAD headers. Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Jiang Liu <jiang.liu@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Takashi Iwai <tiwai@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: kexec@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/1443531537-29436-1-git-send-email-jlee@suse.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-10-02drm/dp/mst: add some defines for logical/physical portsDave Airlie2-1/+5
This just removes the magic number. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: drop cancel work sync in the mstb destroy path (v2)Dave Airlie1-2/+3
Since 9eb1e57f564d4e6e10991402726cc83fe0b9172f drm/dp/mst: make sure mst_primary mstb is valid in work function we validate the mstb structs in the work function, and doing that takes a reference. So we should never get here with the work function running using the mstb device, only if the work function hasn't run yet or is running for another mstb. So we don't need to sync the work here, this was causing lockdep spew as below. [ +0.000160] ============================================= [ +0.000001] [ INFO: possible recursive locking detected ] [ +0.000002] 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 Tainted: G W ------------ [ +0.000001] --------------------------------------------- [ +0.000001] kworker/4:2/1262 is trying to acquire lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b29a5>] flush_work+0x5/0x2e0 [ +0.000007] but task is already holding lock: [ +0.000001] ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] other info that might help us debug this: [ +0.000001] Possible unsafe locking scenario: [ +0.000002] CPU0 [ +0.000000] ---- [ +0.000001] lock((&mgr->work)); [ +0.000002] lock((&mgr->work)); [ +0.000001] *** DEADLOCK *** [ +0.000001] May be due to missing lock nesting notation [ +0.000002] 2 locks held by kworker/4:2/1262: [ +0.000001] #0: (events_long){.+.+.+}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000004] #1: ((&mgr->work)){+.+.+.}, at: [<ffffffff810b57e4>] process_one_work+0x1b4/0x710 [ +0.000003] stack backtrace: [ +0.000003] CPU: 4 PID: 1262 Comm: kworker/4:2 Tainted: G W ------------ 3.10.0-320.el7.rhel72.stable.backport.3.x86_64.debug #1 [ +0.000001] Hardware name: LENOVO 20EGS0R600/20EGS0R600, BIOS GNET71WW (2.19 ) 02/05/2015 [ +0.000008] Workqueue: events_long drm_dp_mst_link_probe_work [drm_kms_helper] [ +0.000001] ffffffff82c26c90 00000000a527b914 ffff88046399bae8 ffffffff816fe04d [ +0.000004] ffff88046399bb58 ffffffff8110f47f ffff880461438000 0001009b840fc003 [ +0.000002] ffff880461438a98 0000000000000000 0000000804dc26e1 ffffffff824a2c00 [ +0.000003] Call Trace: [ +0.000004] [<ffffffff816fe04d>] dump_stack+0x19/0x1b [ +0.000004] [<ffffffff8110f47f>] __lock_acquire+0x115f/0x1250 [ +0.000002] [<ffffffff8110fd49>] lock_acquire+0x99/0x1e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000002] [<ffffffff810b29ee>] flush_work+0x4e/0x2e0 [ +0.000002] [<ffffffff810b29a5>] ? flush_work+0x5/0x2e0 [ +0.000004] [<ffffffff81025905>] ? native_sched_clock+0x35/0x80 [ +0.000002] [<ffffffff81025959>] ? sched_clock+0x9/0x10 [ +0.000002] [<ffffffff810da1f5>] ? local_clock+0x25/0x30 [ +0.000002] [<ffffffff8110dca9>] ? mark_held_locks+0xb9/0x140 [ +0.000003] [<ffffffff810b4ed5>] ? __cancel_work_timer+0x95/0x160 [ +0.000002] [<ffffffff810b4ee8>] __cancel_work_timer+0xa8/0x160 [ +0.000002] [<ffffffff810b4fb0>] cancel_work_sync+0x10/0x20 [ +0.000007] [<ffffffffa0160d17>] drm_dp_destroy_mst_branch_device+0x27/0x120 [drm_kms_helper] [ +0.000006] [<ffffffffa0163968>] drm_dp_mst_link_probe_work+0x78/0xa0 [drm_kms_helper] [ +0.000002] [<ffffffff810b5850>] process_one_work+0x220/0x710 [ +0.000002] [<ffffffff810b57e4>] ? process_one_work+0x1b4/0x710 [ +0.000005] [<ffffffff810b5e5b>] worker_thread+0x11b/0x3a0 [ +0.000003] [<ffffffff810b5d40>] ? process_one_work+0x710/0x710 [ +0.000002] [<ffffffff810beced>] kthread+0xed/0x100 [ +0.000003] [<ffffffff810bec00>] ? insert_kthread_work+0x80/0x80 [ +0.000003] [<ffffffff817121d8>] ret_from_fork+0x58/0x90 v2: add flush_work. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: split connector registration into two parts (v2)Dave Airlie4-6/+23
In order to cache the EDID properly for tiled displays, we need to retrieve it before we register the connector with userspace, otherwise userspace can call get resources and try and get the edid before we've even cached it. This fixes some problems when hotplugging mst monitors, with X/mutter running. As mutter seems to get 0 modes for one of the monitors in the tile. v2: fix warning in radeon handle tile setting in cached path rather than get edid path. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: update the link_address_sent before sending the link address (v3)Dave Airlie1-13/+12
Update the state before sending the msg to close it. v2: reset value if return indicates we haven't send the msg. v3: just clean the code up. Pointed out by Adam J Richter on Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91481 Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: fixup handling hotplug on port removal.Dave Airlie1-10/+26
output ports should always have a connector, unless in the rare case connector allocation fails in the driver. In this case we only need to teardown the pdt, and free the struct, and there is no need to send a hotplug msg. In the case were we add the port to the destroy list we need to send a hotplug if we destroy any connectors, so userspace knows to reprobe stuff. this patch also handles port->connector allocation failing which should be a rare event, but makes the code consistent. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/dp/mst: don't pass port into the path builder functionDave Airlie1-4/+5
This is unnecessary and it makes it easier to see what is needed from port. also add blank line to make things nicer. Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2015-10-02drm/radeon: drop radeon_fb_helper_set_parAlex Deucher1-31/+1
It was just a wrapper around drm_fb_helper_set_par that called cursor_set2 in addition. Now that the core handles this, drop this radeon specific version. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-28 09:59:41 +0300