summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-06-21Merge tag 'renesas-dt2-for-v3.11' of ↵Arnd Bergmann3-10/+33
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt From Simon Horman: Second Round of Renesas ARM-based SoC DT updates for v3.11 * Increased DT coverage for renesas-intc-irqpin by Guennadi Liakhovetski * Clean up of address format used in sh73a0 dtsi file by Guennadi Liakhovetski * tag 'renesas-dt2-for-v3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: irqpin: add a DT property to enable masking on parent ARM: shmobile: sh73a0: remove "0x" prefix from DT node names irqchip: renesas-intc-irqpin: DT binding for sense bitfield width Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21Merge branch 'for_3.11/dts' of ↵Arnd Bergmann44-659/+2172
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into next/dt From Benoit Cousson: omap devicetree changes for v3.11 merge window - Add mandatory DT support for missing IPs, like USB host, bandgap, LED, NAND, LAN, CPSW, PWM for OMAP and AMXX devices. - Introduce new AM43x silicon. * 'for_3.11/dts' of git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt: (52 commits) ARM: dts: omap5-uevm: Provide USB Host PHY clock frequency ARM: dts: omap4-panda: Fix DVI EDID reads ARM: dts: omap4-panda: Add USB Host support ARM: dts: AM43x EPOS EVM support ARM: dts: OMAP5: Add bandgap DT entry ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVM ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMsk ARM: dts: AM33XX: Add pinmux configuration for CPSW to beaglebone ARM: dts: omap3-overo: Add default trigger for TWL4030 LED ARM: dts: omap3-tobi: Correct polarity for GPIO LED ARM: dts: omap3-tobi: Add SMSC911X node ARM: dts: OMAP3: Include IRQ header ARM: dts: Protect pinctrl headers against multiple inclusions ARM: AM33XX: clock data: Enable clkout2 as part of init ARM: AM33XX: clock: Add debugSS clock nodes ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmsk ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evm ARM: dts: AM33XX: Add PWMSS device tree nodes ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices ... Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Tony Lindgren <tony@atomide.com>
2013-06-21Merge tag 's3c24xx-dt-2' of ↵Arnd Bergmann1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: based on tags/s3c24xx-dt-1 - update uart addresses in s3c2416-dt auxdata due to removing S3C2410_PA_UARTX * tag 's3c24xx-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: S3C24XX: update uart addresses in s3c2416-dt auxdata Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-21Merge tag 'exynos-dt-2' of ↵Arnd Bergmann9-35/+248
git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt From Kukjin Kim: 2nd exynos dt update based on tags/exynos-dt-1 - enable RTC on exynos5250 snow and Arndale boards - add support LCD and PWM for exynos4210 Origen board - update bootargs to support 8GiB for exynos5440 SSDK5440 and SD5v1 boards - enable spi and add opp level for exynos5440 - add example doc for samsung-pinctrl dt bindings * tag 'exynos-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: ARM: dts: Set BUCK7 as always on for Origen board ARM: dts: Add FIMD node to Origen4210 board ARM: dts: Add LCD related pinctrl entries for exynos4210 ARM: dts: Add PWM related pinctrl entries for exynos4210 Documentation: Add examples to samsung-pinctrl device tree bindings documentation ARM: dts: Enable RTC node for exynos5250-snow ARM: dts: Enable RTC node for Arndale ARM: dts: Removing pdma for exynos5440 ARM: dts: update bootargs to support 8GiB for SSDK5440 and SD5v1 ARM: dts: Add more opp levels in exynos5440 ARM: dts: Add wm8994 regulator support on smdk5250 ARM: dts: enable spi for EXYNOS5440 SOC Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'nomadik-dt-2' of ↵Arnd Bergmann5-42/+1124
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into next/dt From Linus Walleij: Nomadik DT and clock work: - Lee Jones' pinctrl compat ontology patches - A real clock driver for the Nomadik, 100% DT-based - Device tree changes for the Nomadik clocks * tag 'nomadik-dt-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: add the new clocks to the device tree clk: nomadik: implement the Nomadik clocks properly pinctrl/nomadik: Standardise Pinctrl compat string for Nomadik based platforms ARM: nomadik: Standardise Nomadik STN8815 based Pinctrl compat string in the DTS Conflicts: arch/arm/boot/dts/ste-nomadik-s8815.dts Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux into next/dtArnd Bergmann7-0/+489
From Maxime Ripard: Allwinner SoCs DT additions for 3.11, part 2 Mostly adds support for the i2c controllers and the Allwinner A10S SoC. * tag 'sunxi-dt-for-3.11-2' of git://github.com/mripard/linux: ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree ARM: sunxi: dt: Add Allwinner A10s DTSI ARM: sun4i: cubieboard: Enable the i2c controllers ARM: sun5i: olinuxino: Enable the i2c controllers ARM: sun5i: dt: Add i2c muxing options ARM: sun4i: dt: Add i2c muxing options ARM: sunxi: dt: Add i2c controller nodes to the DTSI Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20ARM: nomadik: add the new clocks to the device treeLinus Walleij2-37/+470
This revamps the device tree to fit with the new clock implementation and brings it quite a bit closer to how the hardware actually works. After this the clock implementation knows about all clock gates and will gate off all unused clocks at boot time and save a bit of power. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-20clk: nomadik: implement the Nomadik clocks properlyLinus Walleij2-3/+652
The Nomadik clock implementation was a stub just using fixed clocks. This implements the clocks properly instead of relying on them all being on at boot and leaving them all on. The PLLs are on the top locking to the main chrystal oscillator, then the HCLK for the peripherals are below PLL2. The gated clocks are implemented with zero cells and given the clock ID as a property of each node, so every gate need to have its own node in the device tree. This is because the gate registers contain both HCLK gates and PCLK gates, where the latter has HCLK as parent. As can be seen from the register layout, this is a complete mixup, which means all these gates need their own node to properly model parent/child relations for PCLKs apart from the HCLKs. This driver also adds a helpful debugfs file to inspect the hardware state of the clock gates. This is the end result in <debugfs>/clk/clk_summary after applying a proper device tree: ulpiclk 0 0 60000000 mxtal 3 3 19200000 pll2 1 1 864000000 clk48 3 3 48000000 rngcclk 1 1 48000000 usbmclk 0 0 48000000 mshcclk 0 0 48000000 mspclk3 0 0 48000000 x3dclk 0 0 48000000 skeclk 0 0 48000000 owmclk 0 0 48000000 mspclk2 0 0 48000000 mspclk1 0 0 48000000 uart2clk 0 0 48000000 ipbmcclk 0 0 48000000 ipi2cclk 0 0 48000000 usbclk 0 0 48000000 mspclk0 0 0 48000000 uart1clk 1 2 48000000 i2c1clk 0 0 48000000 i2c0clk 0 0 48000000 sdiclk 1 1 48000000 uart0clk 0 0 48000000 sspiclk 0 0 48000000 irdaclk 0 0 48000000 clk72 0 0 72000000 difclk 0 0 72000000 clcdclk 0 0 72000000 clk216 0 0 216000000 hsiclkrx 0 0 216000000 clk108 0 0 108000000 hsiclktx 0 0 108000000 clk27 0 0 27000000 pll1 1 1 264000000 hclk 3 3 264000000 hclkrng 1 1 264000000 hclkusbm 0 0 264000000 hclkcryp 0 0 264000000 hclkhash 0 0 264000000 hclk3d 0 0 264000000 hclkhpi 0 0 264000000 hclksva 0 0 264000000 hclksaa 0 0 264000000 hclkdif 0 0 264000000 hclkusb 0 0 264000000 hclkclcd 0 0 264000000 hclkdma1 0 0 264000000 hclksdram 0 0 264000000 hclksmc 1 1 264000000 hclkdma0 0 0 264000000 pclk 7 9 264000000 pclkmsp3 0 0 264000000 pclkmshc 0 0 264000000 pclkhsem 0 0 264000000 pclkske 0 0 264000000 pclkowm 0 0 264000000 pclkmsp2 0 0 264000000 pclkmsp1 0 0 264000000 pclkuart2 0 0 264000000 pclkxti 0 0 264000000 pclkhsi 0 0 264000000 pclkmsp0 0 0 264000000 pclkuart1 1 1 264000000 pclki2c1 0 0 264000000 pclki2c0 0 0 264000000 pclksdi 1 1 264000000 pclkuart0 1 1 264000000 pclkssp 0 0 264000000 pclkirda 0 0 264000000 timclk 1 1 2400000 Acked-by: Mike Turquette <mturquette@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-06-20Merge tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann36-171/+4036
into next/dt From Shawn Guo: imx device tree changes for 3.11: * A bunch of new board additions, imx6sl-evk, vf610-twr, imx53-tx53, imx53-m53evk and imx27-phytec-phycore * Various pinctrl setting updates and additions * Enable various on board peripherals, usb, audio, nor, display etc. * Configure L2 cache data and tag latency from device tree * Add imx-weim bus driver * tag 'imx-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (82 commits) ARM: dts: imx27: Add VPU devicetree node ARM: mxc: fix gpio-ranges for VF610 ARM: dtsi: imx6qdl-sabresd: Enable WM8962 audio support ARM: dtsi: imx6qdl-sabresd: Enable SSI2 and AUDMUX ARM: dtsi: imx6qdl-sabresd: Add WM8962 CODEC support ARM: dtsi: imx6qdl-sabresd: add a fixed regulator for WM8962 ARM: dtsi: imx6dl: Add a pinctrl for AUDMUX ARM: dtsi: imx6q/imx6dl: Add a pinctrl for I2C1 ARM: dts: imx6qdl-sabresd: add clko1 iomux configuration ARM: dts: Phytec imx6q pfla02 and pbab01 support ARM: dts: imx6q: Add pinctrl for usdhc2 and enet ARM: dts: imx27-phytec-phycore-rdk: Add MTD name for NOR flash ARM: dts: imx27-phytec-phycore-rdk: Add SDHC support ARM: dts: i.MX27: Add SDHC devicetree nodes ARM: dts: i.MX27: Add DMA devicetree node ARM: dts: imx6qdl-sabreauto: enable the WEIM NOR ARM: dts: imx6dl: add pinctrls for WEIM NOR ARM: dts: imx6q: add pinctrls for WEIM NOR ARM: dts: imx6qdl: add more information for WEIM ARM: dts: imx6q{dl}: fix the pin conflict between SPI and WEIM ... Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann39-234/+1374
into next/dt This is a dependency for imx/dt Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Arnd Bergmann251-1878/+3206
into next/dt From Shawn Guo: mxs device tree changes for 3.11: * A couple of new board support, cfa10055 and cfa10057 * A few updates on cfa10036 device tree source * Some auart pinctrl data addition * Adopt soc bus infrastructure for mach-mxs * tag 'mxs-dt-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: dt: Add Crystalfontz CFA-10057 device tree ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree ARM: cfa10049: Switch the chip select pin of the LCD controller ARM: cfa10036: Add USB0 OTG port ARM: dts: apf28dev: Add touchscreen support for APF28dev ARM: mxs: Fix UARTs on M28EVK ARM: cfa10036: dt: Change i2c0 clock frequency ARM: dts: cfa10036: Change the OLED display to SSD1306 ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi ARM: mx28: add auart3 2 pins pinmux to imx28.dtsi ARM: mx28: add auart2 2 pins pinmux to imx28.dtsi ARM: mxs: Use soc bus infrastructure ARM: dts: mx28: Adjust the digctl compatible string ARM: mxs: Remove init_irq declaration in machine description Includes an update to 3.10-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20Merge tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx into next/dtArnd Bergmann16-496/+1050
From Michal Simek: arm: Xilinx Zynq dt changes for v3.11 The branch contains: - DT uart handling cleanup - Support for zc706 and zed board - Removal of board compatible string * tag 'zynq-dt-for-3.11' of git://git.xilinx.com/linux-xlnx: arm: dt: zynq: Add support for the zed platform arm: dt: zynq: Add support for the zc706 platform arm: dt: zynq: Use 'status' property for UART nodes arm: zynq: Remove board specific compatibility string clk: zynq: Remove deprecated clock code arm: zynq: Migrate platform to clock controller clk: zynq: Add clock controller driver clk: zynq: Factor out PLL driver Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-06-20ARM: dts: omap5-uevm: Provide USB Host PHY clock frequencyRoger Quadros1-0/+7
USB Host PHY clock on port 2 must be configured to 19.2MHz. Provide this information. Cc: Sricharan R <r.sricharan@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-20ARM: dts: omap4-panda: Fix DVI EDID readsRoger Quadros1-0/+7
On Panda the +5V supply for DVI EDID is supplied by the same regulator that poweres the USB Hub. Currently, the DSS/DVI subsystem doesn't know how to manage this regulator and so DVI EDID reads will fail if USB Hub is not enabled. As a temporary fix we keep this regulator permanently enabled on boot. This fixes the DVI EDID read problem. CC: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-20ARM: dts: omap4-panda: Add USB Host supportRoger Quadros1-0/+67
Provide the RESET and Power regulators for the USB PHY, the USB Host port mode and the PHY device. Also provide pin multiplexer information for the USB host pins. HACK: The reset control need to be replaced with the proper gpio-controlled reset driver as soon it will be merged [1]. [1] http://thread.gmane.org/gmane.linux.drivers.devicetree/36830 Signed-off-by: Roger Quadros <rogerq@ti.com> [benoit.cousson@linaro.org: Add disclaimer about the reset control inside changelog and code] Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: shmobile: irqpin: add a DT property to enable masking on parentGuennadi Liakhovetski2-2/+7
To disable spurious interrupts, that get triggered on certain hardware, the irqpin driver masks them on the parent interrupt controller. To specify such broken devices a .control_parent parameter can be provided in the platform data. In the DT case we need a property, to do the same. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-19ARM: dts: AM43x EPOS EVM supportAfzal Mohammed3-1/+23
Add AM43x ePOS EVM minimal DT source - this is a minimal one to get it booting. Also include it in omap2plus dtbs and document bindings. The hardware is under development. Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP5: Add bandgap DT entryEduardo Valentin1-0/+9
Add bandgap device DT entry for OMAP5 dtsi. Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Signed-off-by: J Keerthy <j-keerthy@ti.com> [benoit.cousson@linaro.org: Fix alignement and use the macros for IRQ attributes] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Add pinmux configuration for CPSW to am335x EVMMugunthan V N1-0/+64
Add pinmux configurations for RGMII based CPSW ethernet to am335x-evm. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Add pinmux configuration for CPSW to EVMskMugunthan V N1-0/+92
Add pinmux configurations for RGMII based CPSW ethernet to AM335x EVMsk. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Add pinmux configuration for CPSW to beagleboneMugunthan V N1-0/+67
Add pinmux configurations for MII based CPSW ethernet to am335x-bone. Default mode is nothing but the values required for the module during active state. With this configurations module is functional as expected. Sleep mode is nothing but the values required for the module during inactive state. The pins are configured to its reset state to optimize energy usage for the pins for the suspend/resume cycle Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap3-overo: Add default trigger for TWL4030 LEDFlorian Vaussard1-0/+1
Commit c971ff1 'leds: leds-pwm: Defer led_pwm_set() if PWM can sleep' fixed a crash when using a trigger with a pwm-led provided by an external chip. Now it is safe to add the default trigger according to board-overo.c. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap3-tobi: Correct polarity for GPIO LEDFlorian Vaussard1-1/+1
The LED is active low, not active high. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap3-tobi: Add SMSC911X nodeFlorian Vaussard1-0/+48
The Tobi expansion boards embeds a SMSC LAN8700 PHY. Add the corresponding node into the DT. The regulators are not designed to be turned off. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP3: Include IRQ headerFlorian Vaussard1-0/+1
Some nodes in OMAP3 DTS now use edge or level sensitive interrupts. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: Protect pinctrl headers against multiple inclusionsFlorian Vaussard2-0/+10
Pinctrl headers were not protected with #ifndef. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: sunxi: Add Olimex A10s-Olinuxino-micro device treeMaxime Ripard2-0/+77
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Tested-by: Emilio López <emilio@elopez.com.ar> Acked-by: Emilio López <emilio@elopez.com.ar>
2013-06-19ARM: AM33XX: clock data: Enable clkout2 as part of initVaibhav Hiremath1-0/+2
clkout2 comes out on the pad and is being used by various external on-board peripherals like, Audio codecs and stuff. So enable the clkout2 by default during init sequence itself. Also, add the missing entry of "clkout2_ck" to the clock table. Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: AM33XX: clock: Add debugSS clock nodesVaibhav Hiremath1-5/+42
Represent debugSS clock interface as provided in CM_WKUP_DEBUGSS_CLKCTRL register, includes - Clock gate for optional DEBUG_CLKA and DBGSYSCLK - Clock Mux for TRC_PMD and STM_PMD - Clock divider for STM and TPIU Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP5: Add Palmas MFD node and regulator nodesJ Keerthy1-0/+167
Add Palmas MFD node and the regulator nodes for OMAP5. The node definitions are based on: https://lkml.org/lkml/2013/6/6/25 Boot tested on omap5-uevm board. Signed-off-by: Graeme Gregory <gg@slimlogic.co.uk> Signed-off-by: J Keerthy <j-keerthy@ti.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmskPhilip Avinash1-0/+23
PWM output from ecap2 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales with inverse polarity. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Add PWM backlight DT data to am335x-evmPhilip Avinash1-0/+23
PWM output from ecap0 uses as backlight source. Also adds low threshold value to have a uniform divisions in brightness-levels scales. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Add PWMSS device tree nodesPhilip Avinash1-0/+84
Add PWMSS device tree nodes in relation with ECAP & EHRPWM DT nodes to AM33XX SoC family. Also populates device tree nodes for ECAP & EHRPWM by adding necessary properties like pwm-cells, base reg & set disabled as status. Signed-off-by: Philip Avinash <avinashphilip@ti.com> Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devicesEduardo Valentin1-0/+9
Add bandgap devices for OMAP4460 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devicesEduardo Valentin1-0/+6
Add the bandgap entry for OMAP4430 devices. Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Russell King <linux@arm.linux.org.uk> [benoit.cousson@linaro.org: Add blank line and fix reg presentation] Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ lineKevin Hilman8-0/+32
On most OMAP3 platforms, the twl4030 IRQ line is connected to the SYS_NIRQ line on OMAP. Add another DTS include file (twl4030_omap3.dtsi) for boards that hook up the twl4030 this way to include. This allows RTC wake from off-mode to work again on OMAP3-based platforms with twl4030. Tested on 3530/Beagle, 3730/Beagle-xM, 3530/Overo, 3730/Overo-STORM. Special thanks to Florian Vaussard for suggesting use of preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Cc: Benoit Cousson <b-cousson@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP3: beagle: enable user button via gpio_keys, enable wakeupKevin Hilman2-0/+50
Using the gpio-keys bindings, configure the user button on Beagle boards. Since the user button is enabled as a wakeup source, also ensure the GPIO pin is mux'd correctly and has IO ring wakeups enabled, so it can also wakeup from off mode. Special thanks to Florian Vaussard for suggesting the preprocessor feature. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP3: beagle/overo: mux console UART, enable wakeupKevin Hilman3-0/+40
Ensure the console uart (UART3) on these boards is mux'd correctly, and IO ring wakeup is enabled. This is needed for serial console wakeups when using DT boot. Thanks to Florian Vaussard for suggestion to use preprocessor features. Cc: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap5-uevm: Add uart pinctrl dataSourav Poddar1-0/+41
Booting omap5 uevm results in the following error "did not get pins for uart error: -19" This happens because omap5 uevm dts file is not adapted to use uart through pinctrl framework. Populate uart pinctrl data to get rid of the error. Signed-off-by: Sourav Poddar <sourav.poddar@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap5-uevm: Add LED support for uEVM blue LEDDan Murphy1-0/+16
Add support for blue LED 1 off of GPIO 153. Make the LED a heartbeat LED Configure the MUX for GPIO output. Signed-off-by: Dan Murphy <dmurphy@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap5-uevm: Add USB Host supportRoger Quadros2-0/+100
Provide the RESET regulators for the USB PHYs, the USB Host port modes and the PHY devices. Also provide pin multiplexer information for the USB host pins. Signed-off-by: Roger Quadros <rogerq@ti.com> [r.sricharan@ti.com: Replaced constants with preprocessor macros] Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap5: Make uevm as the official board and deprecate sevm supportSricharan R2-81/+4
The uevm is the only official board supported for the OMAP5 soc in mainline. The existent sevm platform will no more be supported. Hence cleaning up the board dts file to have only the data required for uevm. Renaming the board dts file and adding the following cleanups. * There are no devices connected on I2C 2,3,4 buses. So remove the pinmux data for the same. * OMAP5432 and DDR3 memory is used in the uevm. Temperature polling is not supported with DDR3 memories. Because of DDR3 phy limitation the voltage change across DVFS and all shadow registers for DVFS on DDR3 is not supported. Hence the emif kernel driver is not required, so removing the DDR3 device file and emif nodes for uevm. * Keypad is not supported on uevm. So remove the device node. Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: OMAP4/AM35xx: Add missing dtb in the dtbs targetFlorian Vaussard1-1/+4
When making the dtbs target on OMAP/AM35xx, some trees are not built. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Use pinctrl constantsFlorian Vaussard4-51/+52
Using constants for pinctrl allows a better readability, and removes redundancy with comments. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Specific pinctrl headerFlorian Vaussard1-0/+37
The pinctrl IP inside the AM33XX family differs slightly from what is found on OMAP2+. Define a specific header to take account of the differences. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM33XX: Use existing constants for GPIOsFlorian Vaussard4-19/+21
Use standard GPIO constants to enhance the readability of DT GPIOs. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM3XXX: Use #include for all device treesFlorian Vaussard6-8/+8
Replace /include/ by #include for AM33XX and AM35XX device tree files, in order to use the C pre-processor, making use of #define features possible. Signed-off-by: Florian Vaussard <florian.vaussard@epfl.ch> Tested-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: AM43x: Initial supportAfzal Mohammed1-0/+68
DT source (minimal) for AM4372 SoC to represent AM43x SoC's. Those represented here are the minimal DT nodes necessary to get kernel booting. In DT nodes, "ti,hwmod" property has not been added, this would be added along with PRCM support for AM43x. Signed-off-by: Ankur Kishore <a-kishore@ti.com> Signed-off-by: Afzal Mohammed <afzal@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap4-panda: Update the twl6040 gpio to macro definitionDan Murphy1-1/+1
Update the dt property ti,audpwron-gpio to use the gpio macro definition for GPIO_ACTIVE_HIGH. Signed-off-by: Dan Murphy <dmurphy@ti.com> Reviewed-by: Florian Vaussard <florian.vaussard@epfl.ch> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
2013-06-19ARM: dts: omap4-panda: Update the LED support for the pandaDan Murphy2-1/+43
The GPIO for LED D1 on the omap4-panda a1-a3 rev and the omap4-panda-es are different. A1-A3 = gpio_wk7 ES = gpio_110 There is no change to LED D2 Abstract away the pinmux and the LED definitions for the two boards into the respective DTS files. Signed-off-by: Dan Murphy <dmurphy@ti.com> Signed-off-by: Benoit Cousson <benoit.cousson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-01 22:50:41 +0300