| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
It's already setup in the only caller of this method in
perf_evsel__open(), right before calling perf_evsel__alloc_fd(), no need
to do it again.
Also it's better to have it out of the function before we move it to
libperf.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-1k8lhyjxfk7o8v4g3r7eyjc9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One can just record callchains in the kernel or user space with this new
options.
We can use it together with "--all-kernel" options.
This two options is used just like print_stack(sys) or print_ustack(usr)
for systemtap.
Shown below is the usage of this new option combined with "--all-kernel"
options:
1. Configure all used events to run in kernel space and just collect
kernel callchains.
$ perf record -a -g --all-kernel --kernel-callchains
2. Configure all used events to run in kernel space and just collect
user callchains.
$ perf record -a -g --all-kernel --user-callchains
Committer notes:
Improved documentation to state that asking for kernel callchains really
is asking for excluding user callchains, and vice versa.
Further mentioned that using both won't get both, but nothing, as both
will be excluded.
Signed-off-by: yuzhoujian <yuzhoujian@didichuxing.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1559222962-22891-1-git-send-email-ufo19890607@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
So perf_config() uses:
int ret = 0;
perf_config_set__for_each_entry(config_set, section, item) {
...
ret = fn();
if (ret < 0)
break;
}
return ret;
Expecting that that break will imediatelly go to function exit to return
that error value (ret).
The problem is that perf_config_set__for_each_entry() expands into two
nested for() loops, one traversing the sections in a config and the
second the items in each of those sections, so we have to change that
'break' to a goto label right before that final 'return ret'.
With that, for instance 'perf trace' now correctly bails out when a
event that is requested to be added via its 'trace.add_events'
~/.perfconfig entry gets rejected by the kernel BPF verifier:
# perf trace ls
event syntax error: '/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o'
\___ Kernel verifier blocks program loading
(add -v to see detail)
Run 'perf list' for a list of valid events
Error: wrong config key-value pair trace.add_events=/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
While before it would continue and explode later, when trying to find
maps that would have been in place had that augmented_raw_syscalls.o
precompiled BPF proggie been accepted by the, humm, bast... rigorous
kernel BPF verifier 8-)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Taeung Song <treeze.taeung@gmail.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: 8a0a9c7e9146 ("perf config: Introduce new init() and exit()")
Link: https://lkml.kernel.org/n/tip-qvqxfk9d0rn1l7lcntwiezrr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
On my Juno board with ARM64 CPUs, perf trace command reports the eBPF
program building failure but the command will not exit and continue to
run. If we define an eBPF event in config file, the event will be
parsed with below flow:
perf_config()
`> trace__config()
`> parse_events_option()
`> parse_events__scanner()
`-> parse_events_parse()
`> parse_events_load_bpf()
`> llvm__compile_bpf()
Though the low level functions return back error values when detect eBPF
building failure, but parse_events_option() returns 1 for this case and
trace__config() passes 1 to perf_config(); perf_config() doesn't treat
the returned value 1 as failure and it continues to parse other
configurations. Thus the perf command continues to run even without
enabling eBPF event successfully.
This patch changes error handling in trace__config(), when it detects
failure it will return -1 rather than directly pass error value (1);
finally, perf_config() will directly bail out and perf will exit for
this case.
Committer notes:
Simplified the patch to just check directly the return of
parse_events_option() and it it is non-zero, change err from its initial
zero value to -1.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Yonghong Song <yhs@fb.com>
Fixes: ac96287cae08 ("perf trace: Allow specifying a set of events to add in perfconfig")
Link: https://lkml.kernel.org/n/tip-x4i63f5kscykfok0hqim3zma@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For instance, the rename* family uses "oldname", "newname", so check if
"name" is at the end and treat it as a filename.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wjy7j4bk06g7atzwoz1mid24@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To support the SCA_FILENAME beautifier in more than one syscall arg, as
needed for syscalls such as the rename* family, we need to, after
processing one such arg, bump the augmented pointers so that the next
augmented arg don't reuse data for the previous augmented arguments.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-4e4cmzyjxb3wkonfo1x9a27y@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We are getting false positive gcc warning when we compile with gcc9 (9.1.1):
CC jvmti/libjvmti.o
In file included from /usr/include/string.h:494,
from jvmti/libjvmti.c:5:
In function ‘strncpy’,
inlined from ‘copy_class_filename.constprop’ at jvmti/libjvmti.c:166:3:
/usr/include/bits/string_fortified.h:106:10: error: ‘__builtin_strncpy’ specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
106 | return __builtin___strncpy_chk (__dest, __src, __len, __bos (__dest));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
jvmti/libjvmti.c: In function ‘copy_class_filename.constprop’:
jvmti/libjvmti.c:165:26: note: length computed here
165 | size_t file_name_len = strlen(file_name);
| ^~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
As per Arnaldo's suggestion use strlcpy(), which does the same thing and keeps
gcc silent.
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ben Gainey <ben.gainey@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190531131321.GB1281@krava
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Almost there, next step is to copy more than one filename payload.
Probably to read syscall arg structs, etc we'll need just a variation of
this that will decide what to use, if probe_read_str() or plain
probe_read for structs, i.e. fixed size.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uf6u0pld6xe4xuo16f04owlz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
augmented_filename part
So that we can use it for multiple args, baby steps not to step into the
verifier toes.
In the process make sure we handle -EFAULT from bpf_prog_read_str(), as
this really is needed now that we'll handle more than one augmented
argument, i.e. if there is failure, then we have the argument that fails
have:
(size = 0, err = -EFAULT, value = [] )
followed by the next, lets say that worked for a second pathname:
(size = 4, err = 0, value = "/tmp" )
So we can skip the first while telling the user about the problem and
then process the second.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-deyvqi39um6gp6hux6jovos8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
One more step into copying multiple filenames to support syscalls like
rename*.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xdqtjexdyp81oomm1rkzeifl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
bytes to copy
Since we know what args are strings from reading the syscall
descriptions in tracefs and also already mark such args to be beautified
using the syscall_arg__scnprintf_filename() helper, all we need is to
fill in this info in the 'syscalls' BPF map we were using to state which
syscalls the user is interested in, i.e. the syscall filter.
Right now just set that with PATH_MAX and unroll the syscall arg in the
BPF program, as the verifier isn't liking something clang generates when
unrolling the loop.
This also makes the augmented_raw_syscalls.c program support all arches,
since we removed that set of defines with the hard coded syscall
numbers, all should be automatically set for all arches, with the
syscall id mapping done correcly.
Doing baby steps here, i.e. just the first string arg for a syscall is
printed, syscalls with more than one, say, the various rename* syscalls,
need further work, but lets get first something that the BPF verifier
accepts before increasing the complexity
To test it, something like:
# perf trace -e string -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
With:
# cat ~/.perfconfig
[llvm]
dump-obj = true
clang-opt = -g
[trace]
#add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.c
show_zeros = yes
show_duration = no
no_inherit = yes
show_timestamp = no
show_arg_names = no
args_alignment = 40
show_prefix = yes
#
That commented add_events line is needed for developing this
augmented_raw_syscalls.c BPF program, as if we add it via the
'add_events' mechanism so as to shorten the 'perf trace' command lines,
then we end up not setting up the -v option which precludes us having
access to the bpf verifier log :-\
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: https://lkml.kernel.org/n/tip-dn863ya0cbsqycxuy0olvbt1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
is activated
The user probably wants to replace the find text, so select the find
text when the find bar is activated.
That is fairly standard behaviour for search text entry.
Entering text will replace the current text, but using edit keys
(arrows, home, end etc) cancels the selection and enables editing.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-23-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Enhance the call tree to display IPC information if it is available.
Committer testing:
[acme@quaco adrian.hunter]$ python ~acme/libexec/perf-core/scripts/python/exported-sql-viewer.py ~/c/adrian.hunter/simple-retpoline.db
Reports -> Call Tree, then expand a few trees, then select with the
mouse and press control+C (copy):
Call Path Object Call Time Time Time(%) Insn Insn Cyc Cyc IPC Branch Branch
▼ simple-retpolin (ns) Cnt Cnt(%) Cnt Cnt(%) Count Count(%)
▼ 23003:23003
▼ _start ld-2.28.so 112195670 218295 100.0 127746 100.0 207320 100.0 0.62 13046 100.0
▶ unknown unknown 112195987 3202 1.5 0 0.0 0 0.0 0 1 0.0
▶ _dl_start ld-2.28.so 112199189 188471 86.3 123394 96.6 180007 86.8 0.69 12529 96.0
▼ _dl_init ld-2.28.so 112387660 13406 6.1 3207 2.5 14868 7.2 0.22 327 2.5
▶ call_init.part.0 ld-2.28.so 112387773 117 0.9 70 2.2 639 4.3 0.11 3 0.9
▶ call_init.part.0 ld-2.28.so 112387890 13129 97.9 3103 96.8 14100 94.8 0.22 315 96.3
▶ call_init.part.0 ld-2.28.so 112401020 0 0.0 0 0.0 0 0.0 0 2 0.6
▼ _start simple-retpol 112401066 12899 5.9 1142 0.9 11561 5.6 0.10 184 1.4
▶ unknown unknown 112401388 846 6.6 0 0.0 0 0.0 0 1 0.5
▼ __libc_start_main libc-2.28.so 112402344 11621 90.1 1129 98.9 10350 89.5 0.11 181 98.4
▶ __cxa_atexit libc-2.28.so 112402360 2302 19.8 101 8.9 1817 17.6 0.06 13 7.2
▶ __libc_csu_init simple-retpol 112404673 121 1.0 43 3.8 340 3.3 0.13 8 4.4
▶ _setjmp libc-2.28.so 112404794 74 0.6 46 4.1 206 2.0 0.22 4 2.2
▼ main simple-retpol 112404892 44 0.4 23 2.0 126 1.2 0.18 12 6.6
▼ foo simple-retpol 112404892 19 43.2 12 52.2 55 43.7 0.22 5 41.7
bar simple-retpol 112404896 12 63.2 3 25.0 34 61.8 0.09 1 20.0
▼ foo simple-retpol 112404911 25 56.8 11 47.8 71 56.3 0.15 5 41.7
▶ bar simple-retpol 112404924 10 40.0 3 27.3 27 38.0 0.11 1 20.0
▶ exit libc-2.28.so 112404936 9029 77.7 878 77.8 7765 75.0 0.11 139 76.8
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-22-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Graph Graph
Enhance the call graph to display IPC information if it is available.
Committer testing:
[acme@quaco adrian.hunter]$ python ~acme/libexec/perf-core/scripts/python/exported-sql-viewer.py ~/c/adrian.hunter/simple-retpoline.db
Reports -> Context Sensitive Callgraph, then expand a few trees, then
select with the mouse and press control+C:
Call Path Object Count Time(ns) Time(%) Insn Insn Cyc Cyc IPC Branch Branch
▼ simple-retpolin Cnt Cnt(%) Cnt Cnt(%) Cnt Cnt(%)
▼ 23003:23003
▼ _start ld-2.28.so 1 218295 100.0 127746 100.0 207320 100.0 0.62 13046 100.0
▶ unknown unknown 1 3202 1.5 0 0.0 0 0.0 0 1 0.0
▶ _dl_start ld-2.28.so 1 188471 86.3 123394 96.6 180007 86.8 0.69 12529 96.0
▶ _dl_init ld-2.28.so 1 13406 6.1 3207 2.5 14868 7.2 0.22 327 2.5
▼ _start simple-retpoline 1 12899 5.9 1142 0.9 11561 5.6 0.10 184 1.4
▶ unknown unknown 1 846 6.6 0 0.0 0 0.0 0 1 0.5
▼ __libc_start_main libc-2.28.so 1 11621 90.1 1129 98.9 10350 89.5 0.11 181 98.4
▶ __cxa_atexit libc-2.28.so 1 2302 19.8 101 8.9 1817 17.6 0.06 13 7.2
▶ __libc_csu_init simple-retpoline 1 121 1.0 43 3.8 340 3.3 0.13 8 4.4
▼ _setjmp libc-2.28.so 1 74 0.6 46 4.1 206 2.0 0.22 4 2.2
▼ __sigsetjmp libc-2.28.so 1 74 100.0 46 100.0 206 100.0 0.22 3 75.0
▶ __sigjmp_save libc-2.28.so 1 0 0.0 0 0.0 0 0.0 0 1 33.3
▼ main simple-retpoline 1 44 0.4 23 2.0 126 1.2 0.18 12 6.6
▼ foo simple-retpoline 2 44 100.0 23 100.0 126 100.0 0.18 10 83.3
bar simple-retpoline 2 22 50.0 6 26.1 61 48.4 0.10 2 20.0
▶ exit libc-2.28.so 1 9029 77.7 878 77.8 7765 75.0 0.11 139 76.8
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-21-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add a parameter to call graph and call tree, to determine whether IPC
information is available.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-20-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Branch reports
Enhance the "All branches" and "Selected branches" reports to display IPC
information if it is available.
Committer testing:
So, testing this I noticed that it all starts with the left arrow in every
line, that should mean there is some tree there, i.e. look at all those ▶
symbols:
Reports -> All Branches:
Time CPU Command PID TID Branch Type In Tx Insn Cnt Cyc Cnt IPC Branch
▶ 187836112195670 7 simple-retpolin 23003 23003 trace begin No 0 0 0 0 unknown (unknown) -> 7f6f33d4f110
+_start (ld-2.28.so)
▶ 187836112195987 7 simple-retpolin 23003 23003 trace end No 0 883 0 7f6f33d4f110 _start (ld-2.28.so) -> 0 unknown
+(unknown)
▶ 187836112199189 7 simple-retpolin 23003 23003 trace begin No 0 0 0 0 unknown (unknown) -> 7f6f33d4f110
+_start (ld-2.28.so)
▶ 187836112199189 7 simple-retpolin 23003 23003 call No 0 0 0 7f6f33d4f113 _start+0x3 (ld-2.28.so) -> 7f6f33d4ff50
+_dl_start (ld-2.28.so)
▶ 187836112199544 7 simple-retpolin 23003 23003 trace end No 17 996 0.02 7f6f33d4ff73 _dl_start+0x23 (ld-2.28.so) -> 0
+unknown (unknown)
▶ 187836112200939 7 simple-retpolin 23003 23003 trace begin No 0 0 0 0 unknown (unknown) -> 7f6f33d4ff73
+_dl_start+0x23 (ld-2.28.so)
▶ 187836112201229 7 simple-retpolin 23003 23003 trace end No 1 816 0.00 7f6f33d4ff7a _dl_start+0x2a (ld-2.28.so) -> 0
+unknown (unknown)
▶ 187836112203500 7 simple-retpolin 23003 23003 trace begin No 0 0 0 0 unknown (unknown) -> 7f6f33d4ff7a
+_dl_start+0x2a (ld-2.28.so)
But if you click on it, that ▶ disappears and a new click doesn't make
it reappear, looks buggy, minor oddity, reported to Adrian.
Reports -> Selected Branches, then ask for branches in the ld-2.28.so
DSO:
Time CPU Command PID TID Branch Type In Tx Insn Cnt Cyc Cnt IPC Branch
▶ 187836112195987 7 simple-retpolin 23003 23003 trace end No 0 883 0 7f6f33d4f110 _start (ld-2.28.so) -> 0 unknown (unknown)
▶ 187836112199189 7 simple-retpolin 23003 23003 trace begin No 0 0 0 0 unknown (unknown) -> 7f6f33d4f110 _start (ld-2.28.so)
▶ 187836112199189 7 simple-retpolin 23003 23003 call No 0 0 0 7f6f33d4f113 _start+0x3 (ld-2.28.so) -> 7f6f33d4ff50 _dl_start (ld-2.28.so)
▶ 187836112199544 7 simple-retpolin 23003 23003 trace end No 17 996 0.02 7f6f33d4ff73 _dl_start+0x23 (ld-2.28.so) -> 0 unknown (unknown)
▶ 187836112200939 7 simple-retpolin 23003 23003 trace begin No 0 0 0 0 unknown (unknown) -> 7f6f33d4ff73 _dl_start+0x23 (ld-2.28.so)
▶ 187836112201229 7 simple-retpolin 23003 23003 trace end No 1 816 0.00 7f6f33d4ff7a _dl_start+0x2a (ld-2.28.so) -> 0 unknown (unknown)
▶ 187836112203500 7 simple-retpolin 23003 23003 trace begin No 0 0 0 0 unknown (unknown) -> 7f6f33d4ff7a _dl_start+0x2a (ld-2.28.so)
▶ 187836112203528 7 simple-retpolin 23003 23003 unconditional jump No 0 0 0 7f6f33d4ffe7 _dl_start+0x97 (ld-2.28.so) -> 7f6f33d5000b _dl_start+0xbb (ld-2.28.so)
▶ 187836112203528 7 simple-retpolin 23003 23003 conditional jump No 0 0 0 7f6f33d5000f _dl_start+0xbf (ld-2.28.so) -> 7f6f33d4fffb _dl_start+0xab (ld-2.28.so)
▶ 187836112203528 7 simple-retpolin 23003 23003 conditional jump No 0 0 0 7f6f33d5000f _dl_start+0xbf (ld-2.28.so) -> 7f6f33d4fffb _dl_start+0xab (ld-2.28.so)
▶ 187836112203539 7 simple-retpolin 23003 23003 conditional jump No 0 0 0 7f6f33d50025 _dl_start+0xd5 (ld-2.28.so) -> 7f6f33d50210 _dl_start+0x2c0 (ld-2.28.so)
▶ 187836112203539 7 simple-retpolin 23003 23003 conditional jump No 0 0 0 7f6f33d5021a _dl_start+0x2ca (ld-2.28.so) -> 7f6f33d50360 _dl_start+0x410 (ld-2.28.so)
▶ 187836112203539 7 simple-retpolin 23003 23003 unconditional jump No 0 0 0 7f6f33d50377 _dl_start+0x427 (ld-2.28.so) -> 7f6f33d4ffff _dl_start+0xaf (ld-2.28.so)
▶ 187836112203539 7 simple-retpolin 23003 23003 conditional jump No 0 0 0 7f6f33d5000f _dl_start+0xbf (ld-2.28.so) -> 7f6f33d4fffb _dl_start+0xab (ld-2.28.so)
▶ 187836112203562 7 simple-retpolin 23003 23003 conditional jump No 0 0 0 7f6f33d5000f _dl_start+0xbf (ld-2.28.so) -> 7f6f33d4fffb _dl_start+0xab (ld-2.28.so)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-19-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Export cycle and instruction counts on samples and calls tables.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-18-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Export cycle and instruction counts on samples and calls tables.
Committer testing:
First runs some workload collecting intel_pt with the 'cyc' ter just for
userspace:
[root@quaco adrian.hunter]# perf record -o simple-retpoline.perf.data -e intel_pt/cyc/u ./simple-retpoline
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.035 MB simple-retpoline.perf.data ]
[root@quaco adrian.hunter]#
Then use the export-to-sqlite.py script to see if the changes in this
cset don't make it to break and if the changes in the db schema are the
ones expected:
[root@quaco adrian.hunter]# perf script -i simple-retpoline.perf.data --itrace=be -s ~acme/libexec/perf-core/scripts/python/export-to-sqlite.py simple-retpoline.db branches calls
2019-05-31 11:50:46.942710 Creating database ...
2019-05-31 11:50:46.949663 Writing records...
2019-05-31 11:50:47.224033 Adding indexes
2019-05-31 11:50:47.231599 Done
[root@quaco adrian.hunter]#
Now lets use the db:
[root@quaco adrian.hunter]# sqlite3 simple-retpoline.db
SQLite version 3.26.0 2018-12-01 12:34:55
Enter ".help" for usage hints.
sqlite> .schema samples
CREATE TABLE samples (id integer NOT NULL PRIMARY KEY,evsel_id bigint,machine_id bigint,thread_id bigint,comm_id bigint,dso_id bigint,symbol_id bigint,sym_offset bigint,ip bigint,time bigint,cpuinteger,to_dso_id bigint,to_symbol_id bigint,to_sym_offset bigint,to_ip bigint,branch_type integer,in_tx boolean,call_path_id bigint,insn_count bigint,cyc_count bigint);
sqlite>
Cool, the 'insn_count' and 'cyc_count' are there, now lets see if we can
use them in a query:
sqlite> select insn_count,cyc_count from samples where cyc_count > 1500 and insn_count < 10;
6|1507
sqlite> select insn_count,cyc_count from samples where cyc_count > 1500;
118|2210
140|1516
3783|1861
132|1521
6|1507
sqlite>
Seems to work :-)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-17-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Export cycle and instruction counts on samples and call-returns.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-16-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add brief documentation to explain how the database export maintains
backward and forward compatibility.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-15-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Cycle and instruction counts are added to the stack. The IPC of a
function and all functions it calls, is also recorded.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-14-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add brief documentation about instructions-per-cycle (IPC) information
derived from Intel PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When CYC packets are not available, it is still possible to count cycles
using TSC/TMA/MTC timestamps.
As the timestamp increments in TSC ticks, convert to CPU cycles using
the current core-to-bus ratio.
Do not accumulate cycles when control flow packet generation is not
enabled, nor when time has been "lost", typically due to mwait, which is
indicated by a TSC/TMA packet that is not part of PSB+.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To make it easier to add new code for different TIP cases, separate each
case.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation for using MTC packets to count cycles, record whether
decoding is between a PSB and PSBEND packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add field 'ipc' to display instructions-per-cycle.
Example:
perf record -e intel_pt/cyc/u ls
perf script --insn-trace --xed -F+ipc,-dso,-cpu,-tid
ls 2670177.697113434: 7f0dfdbcd090 _start+0x0 mov %rsp, %rdi IPC: 0.00 (1/877)
ls 2670177.697113434: 7f0dfdbcd093 _start+0x3 callq 0x7f0dfdbce030
ls 2670177.697113434: 7f0dfdbce030 _dl_start+0x0 pushq %rbp
ls 2670177.697113434: 7f0dfdbce031 _dl_start+0x1 mov %rsp, %rbp
ls 2670177.697113434: 7f0dfdbce034 _dl_start+0x4 pushq %r15
ls 2670177.697113434: 7f0dfdbce036 _dl_start+0x6 pushq %r14
ls 2670177.697113434: 7f0dfdbce038 _dl_start+0x8 pushq %r13
ls 2670177.697113434: 7f0dfdbce03a _dl_start+0xa pushq %r12
ls 2670177.697113434: 7f0dfdbce03c _dl_start+0xc mov %rdi, %r12
ls 2670177.697113434: 7f0dfdbce03f _dl_start+0xf pushq %rbx
ls 2670177.697113434: 7f0dfdbce040 _dl_start+0x10 sub $0x38, %rsp
ls 2670177.697113434: 7f0dfdbce044 _dl_start+0x14 rdtsc
ls 2670177.697113434: 7f0dfdbce046 _dl_start+0x16 mov %eax, %eax
ls 2670177.697113434: 7f0dfdbce048 _dl_start+0x18 shl $0x20, %rdx
ls 2670177.697113434: 7f0dfdbce04c _dl_start+0x1c or %rax, %rdx
ls 2670177.697114471: 7f0dfdbce04f _dl_start+0x1f movq 0x27e22(%rip), %rax IPC: 0.00 (15/1685)
ls 2670177.697116177: 7f0dfdbce056 _dl_start+0x26 movq %rdx, 0x27683(%rip) IPC: 0.00 (1/881)
Note, the IPC values are low due to page faults at the beginning of
execution. The additional cycles are due to the time to enter the
kernel, not the actual kernel page fault handler.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Copy the incremental instruction count and cycle count onto 'instructions'
and 'branches' samples.
Because Intel PT does not update the cycle count on every branch or
instruction, the incremental values will often be zero.
When there are values, they will be the number of instructions and
number of cycles since the last update, and thus represent the average
IPC since the last IPC value.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add counts of instructions and cycles, in order to represent
instructions-per-cycle (IPC).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation for providing instructions-per-cycle (IPC) information,
accumulate cycle count from CYC packets.
Although CYC packets are optional (requires config term 'cyc' to enable
cycle-accurate mode when recording), the simplest way to count cycles is
with CYC packets.
The first complication is that cycles must be counted only when also
counting instructions.
That means when control flow packet generation is enabled i.e. between
TIP.PGE and TIP.PGD packets.
Also, sampling the cycle count follows the same rules as sampling the
timestamp, that is, not before the instruction to which the decoder is
walking is reached.
In addition, the cycle count is not accurate for any but the first
branch of a TNT packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To eliminate some duplication and make the code more understandable,
factor out intel_pt_update_sample_time.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190520113728.14389-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When DWARF stacks were requested and at the same time that the user
specifies a register set using the --user-regs option the full register
context was being captured on samples:
$ perf record -g --call-graph dwarf,1024 --user-regs=IP,SP,BP -- stack_test2.g.O3
188143843893585 0x6b48 [0x4f8]: PERF_RECORD_SAMPLE(IP, 0x4002): 23828/23828: 0x401236 period: 1363819 addr: 0x7ffedbdd51ac
... FP chain: nr:0
... user regs: mask 0xff0fff ABI 64-bit
.... AX 0x53b
.... BX 0x7ffedbdd3cc0
.... CX 0xffffffff
.... DX 0x33d3a
.... SI 0x7f09b74c38d0
.... DI 0x0
.... BP 0x401260
.... SP 0x7ffedbdd3cc0
.... IP 0x401236
.... FLAGS 0x20a
.... CS 0x33
.... SS 0x2b
.... R8 0x7f09b74c3800
.... R9 0x7f09b74c2da0
.... R10 0xfffffffffffff3ce
.... R11 0x246
.... R12 0x401070
.... R13 0x7ffedbdd5db0
.... R14 0x0
.... R15 0x0
... ustack: size 1024, offset 0xe0
. data_src: 0x5080021
... thread: stack_test2.g.O:23828
...... dso: /root/abudanko/stacks/stack_test2.g.O3
I.e. the --user-regs=IP,SP,BP was being ignored, being overridden by the
needs of --call-graph=dwarf.
After applying the change in this patch the sample data contains the
user specified register, but making sure that at least the minimal set
of register needed for DWARF unwinding (DWARF_MINIMAL_REGS) is
requested.
The user is warned that DWARF unwinding may not work if extra registers
end up being needed.
-g call-graph dwarf,K full_regs
--user-regs=user_regs user_regs
-g call-graph dwarf,K --user-regs=user_regs user_regs + DWARF_MINIMAL_REGS
$ perf record -g --call-graph dwarf,1024 --user-regs=BP -- ls
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
arch COPYING Documentation include Kbuild lbuild MAINTAINERS modules.builtin Module.symvers perf.data.old scripts System.map virt
block CREDITS drivers init Kconfig lib Makefile modules.builtin.modinfo net README security tools vmlinux
certs crypto fs ipc kernel LICENSES mm modules.order perf.data samples sound usr vmlinux.o
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
188368474305373 0x5e40 [0x470]: PERF_RECORD_SAMPLE(IP, 0x4002): 23839/23839: 0x401236 period: 1260507 addr: 0x7ffd3d85e96c
... FP chain: nr:0
... user regs: mask 0x1c0 ABI 64-bit
.... BP 0x401260
.... SP 0x7ffd3d85cc20
.... IP 0x401236
... ustack: size 1024, offset 0x58
. data_src: 0x5080021
Committer notes:
Detected build failures on arches where PERF_REGS_ is not available,
such as debian:experimental-x-{mips,mips64,mipsel}, fedora 24 and 30 for
ARC uClibc and glibc, reported to Alexey that provided a patch moving
the DWARF_MINIMAL_REGS from evsel.c to util/perf_regs.h, where it is
guarded by an HAVE_PERF_REGS_SUPPORT ifdef.
Committer testing:
# perf record --user-regs=bp,ax -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.955 MB perf.data (1773 samples) ]
# perf script -F+uregs | grep AX: | head -5
perf 1719 [000] 181.272398: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272402: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272403: 8 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272405: 181 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
perf 1719 [000] 181.272406: 4405 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffef828fb00
# perf record --call-graph=dwarf --user-regs=bp,ax -a sleep 1
WARNING: The use of --call-graph=dwarf may require all the user registers, specifying a subset with --user-regs may render DWARF unwinding unreliable, so the minimal registers set (IP, SP) is explicitly forced.
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 24.184 MB perf.data (2841 samples) ]
[root@quaco ~]# perf script --hide-call-graph -F+uregs | grep AX: | head -5
perf 1729 [000] 211.268006: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268014: 1 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268017: 5 cycles: ffffffffba06a7c4 native_write_msr+0x4 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268020: 48 cycles: ffffffffba06a7c6 native_write_msr+0x6 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
perf 1729 [000] 211.268024: 490 cycles: ffffffffba00e471 intel_bts_enable_local+0x21 (/lib/modules/5.2.0-rc1+/build/vmlinux) ABI:2 AX:0xffffffffffffffda BP:0x7ffc8679abb0 SP:0x7ffc8679ab78 IP:0x7fa75223a0db
#
Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/e7fd37b1-af22-0d94-a0dc-5895e803bbfe@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Variable 'err' is defined but never used in function symsrc__init(),
remove it and directly return -1 at the end of the function.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190530093801.20510-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_DIR_FORMAT header, do it now from comments in the patch
introducing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: 258031c017c3 ("perf header: Add DIR_FORMAT feature to describe directory data")
Link: https://lkml.kernel.org/n/tip-jbrzb7ijb5al33gi8br6f9rr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_CLOCKID header, do it now from comments in the patch introducing
it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Simon Que <sque@chromium.org>
Fixes: cf7905165fee ("perf record: Encode -k clockid frequency into Perf trace")
Link: https://lkml.kernel.org/n/tip-slhnjp06027j3ae17qqetzxj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
We forgot to update the perf.data file format document for the
HEADER_MEM_TOPOLOGY header, do it now from comments in the patch
introducing it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Chong Jiang <chongjiang@chromium.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Simon Que <sque@chromium.org>
Fixes: e2091cedd51b ("perf tools: Add MEM_TOPOLOGY feature to perf data file")
Link: https://lkml.kernel.org/n/tip-h5lcm1nbe9ztxwm61gmadd56@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
This patch addes description of HEADER_BPF_PROG_INFO and HEADER_BPF_BTF to
perf.data-file-format.txt.
Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Fixes: 606f972b1361 ("perf bpf: Save bpf_prog_info information as headers to perf.data")
Link: http://lkml.kernel.org/r/20190521064406.2498925-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group for default
attributes - freeze_on_smi, allow_tsx_force_abort.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-10-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group for
skylake specific format attributes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-9-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group for
extra "format" directory.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-8-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group for
"caps" directory.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-7-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
We dont need to pre-filter out unsupported base events,
we can just use its group's is_visible function to do this.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-6-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Using the new pmu::update_attrs attribute group to
create detected events for x86_pmu.
Moving the topdown/memory/tsx attributes to separate
attribute groups with specific is_visible functions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-5-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Nobody is using that.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-4-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Adding attr_update attribute group into pmu, to allow
having multiple attribute groups for same group name.
This will allow us to update "events" or "format"
directories with attributes that depend on various
HW conditions.
For example having group_format_extra group that updates
"format" directory only if pmu version is 2 and higher:
static umode_t
exra_is_visible(struct kobject *kobj, struct attribute *attr, int i)
{
return x86_pmu.version >= 2 ? attr->mode : 0;
}
static struct attribute_group group_format_extra = {
.name = "format",
.is_visible = exra_is_visible,
};
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-3-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Adding sysfs_update_groups function to update
multiple groups.
sysfs_update_groups - given a directory kobject, create a bunch of attribute groups
@kobj: The kobject to update the group on
@groups: The attribute groups to update, NULL terminated
This function update a bunch of attribute groups. If an error occurs when
updating a group, all previously updated groups will be removed together
with already existing (not updated) attributes.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190512155518.21468-2-jolsa@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
WhiskeyLake CPUs
AmberLake and WhiskeyLake have same client uncore events as
KabyLake. Thus add the PCI IDs for AmberLake Y processor lines,
for WhiskeyLake U processor lines and for KabyLake, add H
processor line and workstation.
Platform Device ID
================================
AML Y 2 Core 590Ch
KBL H 4 Core 5910h
KBL 4 Core WorkStation 5918h
WHL U 4 Core 3ED0h
WHL U 4 Core 3E34h
WHL U 2 Core 3E35h
AML Y 4 Core 590Dh
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Charles Prestopine <charles.d.prestopine@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190511000311.20733-2-gayatri.kammela@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Improve code readability by adding tabs after #define macros
Signed-off-by: Gayatri Kammela <gayatri.kammela@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Charles Prestopine <charles.d.prestopine@intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190511000311.20733-1-gayatri.kammela@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Currently, non-privileged user could only use uprobe with
kernel.perf_event_paranoid = -1
However, setting perf_event_paranoid to -1 leaks other users' processes to
non-privileged uprobes.
To introduce proper permission control of uprobes, we are building the
following system:
A daemon with CAP_SYS_ADMIN is in charge to create uprobes via tracefs;
Users asks the daemon to create uprobes;
Then user can attach uprobe only to processes owned by the user.
This patch allows non-privileged user to attach uprobe to processes owned
by the user.
The following example shows how to use uprobe with non-privileged user.
This is based on Brendan's blog post [1]
1. Create uprobe with root:
sudo perf probe -x 'readline%return +0($retval):string'
2. Then non-root user can use the uprobe as:
perf record -vvv -e probe_bash:readline__return -p <pid> sleep 20
perf script
[1] http://www.brendangregg.com/blog/2015-06-28/linux-ftrace-uprobe.html
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: <kernel-team@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20190507161545.788381-1-songliubraving@fb.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
