summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-03-01Linux 5.10.211v5.10.211Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20240227131558.694096204@linuxfoundation.org Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Dominique Martinet <dominique.martinet@atmark-techno.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: kernelci.org bot <bot@kernelci.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01ext4: regenerate buddy after block freeing failed if under fc replayBaokun Li1-0/+20
commit c9b528c35795b711331ed36dc3dbee90d5812d4e upstream. This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on code in mb_free_blocks(), fast commit replay can end up marking as free blocks that are already marked as such. This causes corruption of the buddy bitmap so we need to regenerate it in that case. Reported-by: Jan Kara <jack@suse.cz> Fixes: 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") Signed-off-by: Baokun Li <libaokun1@huawei.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20240104142040.2835097-4-libaokun1@huawei.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01arp: Prevent overflow in arp_req_get().Kuniyuki Iwashima1-1/+2
commit a7d6027790acea24446ddd6632d394096c0f4667 upstream. syzkaller reported an overflown write in arp_req_get(). [0] When ioctl(SIOCGARP) is issued, arp_req_get() looks up an neighbour entry and copies neigh->ha to struct arpreq.arp_ha.sa_data. The arp_ha here is struct sockaddr, not struct sockaddr_storage, so the sa_data buffer is just 14 bytes. In the splat below, 2 bytes are overflown to the next int field, arp_flags. We initialise the field just after the memcpy(), so it's not a problem. However, when dev->addr_len is greater than 22 (e.g. MAX_ADDR_LEN), arp_netmask is overwritten, which could be set as htonl(0xFFFFFFFFUL) in arp_ioctl() before calling arp_req_get(). To avoid the overflow, let's limit the max length of memcpy(). Note that commit b5f0de6df6dc ("net: dev: Convert sa_data to flexible array in struct sockaddr") just silenced syzkaller. [0]: memcpy: detected field-spanning write (size 16) of single field "r->arp_ha.sa_data" at net/ipv4/arp.c:1128 (size 14) WARNING: CPU: 0 PID: 144638 at net/ipv4/arp.c:1128 arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Modules linked in: CPU: 0 PID: 144638 Comm: syz-executor.4 Not tainted 6.1.74 #31 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-debian-1.16.0-5 04/01/2014 RIP: 0010:arp_req_get+0x411/0x4a0 net/ipv4/arp.c:1128 Code: fd ff ff e8 41 42 de fb b9 0e 00 00 00 4c 89 fe 48 c7 c2 20 6d ab 87 48 c7 c7 80 6d ab 87 c6 05 25 af 72 04 01 e8 5f 8d ad fb <0f> 0b e9 6c fd ff ff e8 13 42 de fb be 03 00 00 00 4c 89 e7 e8 a6 RSP: 0018:ffffc900050b7998 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff88803a815000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8641a44a RDI: 0000000000000001 RBP: ffffc900050b7a98 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 203a7970636d656d R12: ffff888039c54000 R13: 1ffff92000a16f37 R14: ffff88803a815084 R15: 0000000000000010 FS: 00007f172bf306c0(0000) GS:ffff88805aa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f172b3569f0 CR3: 0000000057f12005 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> arp_ioctl+0x33f/0x4b0 net/ipv4/arp.c:1261 inet_ioctl+0x314/0x3a0 net/ipv4/af_inet.c:981 sock_do_ioctl+0xdf/0x260 net/socket.c:1204 sock_ioctl+0x3ef/0x650 net/socket.c:1321 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:870 [inline] __se_sys_ioctl fs/ioctl.c:856 [inline] __x64_sys_ioctl+0x18e/0x220 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:81 entry_SYSCALL_64_after_hwframe+0x64/0xce RIP: 0033:0x7f172b262b8d Code: 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f172bf300b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007f172b3abf80 RCX: 00007f172b262b8d RDX: 0000000020000000 RSI: 0000000000008954 RDI: 0000000000000003 RBP: 00007f172b2d3493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000000b R14: 00007f172b3abf80 R15: 00007f172bf10000 </TASK> Reported-by: syzkaller <syzkaller@googlegroups.com> Reported-by: Bjoern Doebel <doebel@amazon.de> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20240215230516.31330-1-kuniyu@amazon.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaioBart Van Assche2-1/+10
commit b820de741ae48ccf50dd95e297889c286ff4f760 upstream. If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. Suggested-by: Jens Axboe <axboe@kernel.dk> Cc: Christoph Hellwig <hch@lst.de> Cc: Avi Kivity <avi@scylladb.com> Cc: Sandeep Dhavale <dhavale@google.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Kent Overstreet <kent.overstreet@linux.dev> Cc: stable@vger.kernel.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240215204739.2677806-2-bvanassche@acm.org Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01block: ataflop: more blk-mq refactoring fixesMichael Schmitz1-5/+37
commit d28e4dff085c5a87025c9a0a85fb798bd8e9ca17 upstream. As it turns out, my earlier patch in commit 86d46fdaa12a (block: ataflop: fix breakage introduced at blk-mq refactoring) was incomplete. This patch fixes any remaining issues found during more testing and code review. Requests exceeding 4 k are handled in 4k segments but __blk_mq_end_request() is never called on these (still sectors outstanding on the request). With redo_fd_request() removed, there is no provision to kick off processing of the next segment, causing requests exceeding 4k to hang. (By setting /sys/block/fd0/queue/max_sectors_k <= 4 as workaround, this behaviour can be avoided). Instead of reintroducing redo_fd_request(), requeue the remainder of the request by calling blk_mq_requeue_request() on incomplete requests (i.e. when blk_update_request() still returns true), and rely on the block layer to queue the residual as new request. Both error handling and formatting needs to release the ST-DMA lock, so call finish_fdc() on these (this was previously handled by redo_fd_request()). finish_fdc() may be called legitimately without the ST-DMA lock held - make sure we only release the lock if we actually held it. In a similar way, early exit due to errors in ataflop_queue_rq() must release the lock. After minor errors, fd_error sets up to recalibrate the drive but never re-runs the current operation (another task handled by redo_fd_request() before). Call do_fd_action() to get the next steps (seek, retry read/write) underway. Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Fixes: 6ec3938cff95f (ataflop: convert to blk-mq) CC: linux-block@vger.kernel.org Link: https://lore.kernel.org/r/20211024002013.9332-1-schmitzmic@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk> [MSch: v5.10 backport merge conflict fix] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01drm/amd/display: Fix memory leak in dm_sw_fini()Armin Wolf1-0/+1
[ Upstream commit bae67893578d608e35691dcdfa90c4957debf1d3 ] After destroying dmub_srv, the memory associated with it is not freed, causing a memory leak: unreferenced object 0xffff896302b45800 (size 1024): comm "(udev-worker)", pid 222, jiffies 4294894636 hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 6265fd77): [<ffffffff993495ed>] kmalloc_trace+0x29d/0x340 [<ffffffffc0ea4a94>] dm_dmub_sw_init+0xb4/0x450 [amdgpu] [<ffffffffc0ea4e55>] dm_sw_init+0x15/0x2b0 [amdgpu] [<ffffffffc0ba8557>] amdgpu_device_init+0x1417/0x24e0 [amdgpu] [<ffffffffc0bab285>] amdgpu_driver_load_kms+0x15/0x190 [amdgpu] [<ffffffffc0ba09c7>] amdgpu_pci_probe+0x187/0x4e0 [amdgpu] [<ffffffff9968fd1e>] local_pci_probe+0x3e/0x90 [<ffffffff996918a3>] pci_device_probe+0xc3/0x230 [<ffffffff99805872>] really_probe+0xe2/0x480 [<ffffffff99805c98>] __driver_probe_device+0x78/0x160 [<ffffffff99805daf>] driver_probe_device+0x1f/0x90 [<ffffffff9980601e>] __driver_attach+0xce/0x1c0 [<ffffffff99803170>] bus_for_each_dev+0x70/0xc0 [<ffffffff99804822>] bus_add_driver+0x112/0x210 [<ffffffff99807245>] driver_register+0x55/0x100 [<ffffffff990012d1>] do_one_initcall+0x41/0x300 Fix this by freeing dmub_srv after destroying it. Fixes: 743b9786b14a ("drm/amd/display: Hook up the DMUB service in DM") Signed-off-by: Armin Wolf <W_Armin@gmx.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is setErik Kurzinger1-2/+4
[ Upstream commit 3c43177ffb54ea5be97505eb8e2690e99ac96bc9 ] When waiting for a syncobj timeline point whose fence has not yet been submitted with the WAIT_FOR_SUBMIT flag, a callback is registered using drm_syncobj_fence_add_wait and the thread is put to sleep until the timeout expires. If the fence is submitted before then, drm_syncobj_add_point will wake up the sleeping thread immediately which will proceed to wait for the fence to be signaled. However, if the WAIT_AVAILABLE flag is used instead, drm_syncobj_fence_add_wait won't get called, meaning the waiting thread will always sleep for the full timeout duration, even if the fence gets submitted earlier. If it turns out that the fence *has* been submitted by the time it eventually wakes up, it will still indicate to userspace that the wait completed successfully (it won't return -ETIME), but it will have taken much longer than it should have. To fix this, we must call drm_syncobj_fence_add_wait if *either* the WAIT_FOR_SUBMIT flag or the WAIT_AVAILABLE flag is set. The only difference being that with WAIT_FOR_SUBMIT we will also wait for the fence to be signaled after it has been submitted while with WAIT_AVAILABLE we will return immediately. IGT test patch: https://lists.freedesktop.org/archives/igt-dev/2024-January/067537.html v1 -> v2: adjust lockdep_assert_none_held_once condition (cherry picked from commit 8c44ea81634a4a337df70a32621a5f3791be23df) Fixes: 01d6c3578379 ("drm/syncobj: add support for timeline point wait v8") Signed-off-by: Erik Kurzinger <ekurzinger@nvidia.com> Signed-off-by: Simon Ser <contact@emersion.fr> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Simon Ser <contact@emersion.fr> Link: https://patchwork.freedesktop.org/patch/msgid/20240119163208.3723457-1-ekurzinger@nvidia.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01drm/syncobj: make lockdep complain on WAIT_FOR_SUBMIT v3Christian König2-0/+17
[ Upstream commit 7621350c6bb20fb6ab7eb988833ab96eac3dcbef ] DRM_SYNCOBJ_WAIT_FLAGS_WAIT_FOR_SUBMIT can't be used when we hold locks since we are basically waiting for userspace to do something. Holding a lock while doing so can trivial deadlock with page faults etc... So make lockdep complain when a driver tries to do this. v2: Add lockdep_assert_none_held() macro. v3: Add might_sleep() and also use lockdep_assert_none_held() in the IOCTL path. Signed-off-by: Christian König <christian.koenig@amd.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://patchwork.freedesktop.org/patch/414944/ Stable-dep-of: 3c43177ffb54 ("drm/syncobj: call drm_syncobj_fence_add_wait when WAIT_AVAILABLE flag is set") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01netfilter: nf_tables: set dormant flag on hook register failureFlorian Westphal1-0/+1
[ Upstream commit bccebf64701735533c8db37773eeacc6566cc8ec ] We need to set the dormant flag again if we fail to register the hooks. During memory pressure hook registration can fail and we end up with a table marked as active but no registered hooks. On table/base chain deletion, nf_tables will attempt to unregister the hook again which yields a warn splat from the nftables core. Reported-and-tested-by: syzbot+de4025c006ec68ac56fc@syzkaller.appspotmail.com Fixes: 179d9ba5559a ("netfilter: nf_tables: fix table flag updates") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01tls: stop recv() if initial process_rx_list gave us non-DATASabrina Dubroca1-1/+1
[ Upstream commit fdfbaec5923d9359698cbb286bc0deadbb717504 ] If we have a non-DATA record on the rx_list and another record of the same type still on the queue, we will end up merging them: - process_rx_list copies the non-DATA record - we start the loop and process the first available record since it's of the same type - we break out of the loop since the record was not DATA Just check the record type and jump to the end in case process_rx_list did some work. Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Link: https://lore.kernel.org/r/bd31449e43bd4b6ff546f5c51cf958c31c511deb.1708007371.git.sd@queasysnail.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01tls: rx: drop pointless else after gotoJakub Kicinski1-2/+1
[ Upstream commit d5123edd10cf9d324fcb88e276bdc7375f3c5321 ] Pointless else branch after goto makes the code harder to refactor down the line. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: fdfbaec5923d ("tls: stop recv() if initial process_rx_list gave us non-DATA") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01tls: rx: jump to a more appropriate labelJakub Kicinski1-3/+4
[ Upstream commit bfc06e1aaa130b86a81ce3c41ec71a2f5e191690 ] 'recv_end:' checks num_async and decrypted, and is then followed by the 'end' label. Since we know that decrypted and num_async are 0 at the start we can jump to 'end'. Move the init of decrypted and num_async to let the compiler catch if I'm wrong. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Stable-dep-of: fdfbaec5923d ("tls: stop recv() if initial process_rx_list gave us non-DATA") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01s390: use the correct count for __iowrite64_copy()Jason Gunthorpe1-1/+1
[ Upstream commit 723a2cc8d69d4342b47dfddbfe6c19f1b135f09b ] The signature for __iowrite64_copy() requires the number of 64 bit quantities, not bytes. Multiple by 8 to get to a byte length before invoking zpci_memcpy_toio() Fixes: 87bc359b9822 ("s390/pci: speed up __iowrite64_copy by using pci store block insn") Acked-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/0-v1-9223d11a7662+1d7785-s390_iowrite64_jgg@nvidia.com Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01net: dev: Convert sa_data to flexible array in struct sockaddrKees Cook4-8/+11
[ Upstream commit b5f0de6df6dce8d641ef58ef7012f3304dffb9a1 ] One of the worst offenders of "fake flexible arrays" is struct sockaddr, as it is the classic example of why GCC and Clang have been traditionally forced to treat all trailing arrays as fake flexible arrays: in the distant misty past, sa_data became too small, and code started just treating it as a flexible array, even though it was fixed-size. The special case by the compiler is specifically that sizeof(sa->sa_data) and FORTIFY_SOURCE (which uses __builtin_object_size(sa->sa_data, 1)) do not agree (14 and -1 respectively), which makes FORTIFY_SOURCE treat it as a flexible array. However, the coming -fstrict-flex-arrays compiler flag will remove these special cases so that FORTIFY_SOURCE can gain coverage over all the trailing arrays in the kernel that are _not_ supposed to be treated as a flexible array. To deal with this change, convert sa_data to a true flexible array. To keep the structure size the same, move sa_data into a union with a newly introduced sa_data_min with the original size. The result is that FORTIFY_SOURCE can continue to have no idea how large sa_data may actually be, but anything using sizeof(sa->sa_data) must switch to sizeof(sa->sa_data_min). Cc: Jens Axboe <axboe@kernel.dk> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: David Ahern <dsahern@kernel.org> Cc: Dylan Yudaken <dylany@fb.com> Cc: Yajun Deng <yajun.deng@linux.dev> Cc: Petr Machata <petrm@nvidia.com> Cc: Hangbin Liu <liuhangbin@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: syzbot <syzkaller@googlegroups.com> Cc: Willem de Bruijn <willemb@google.com> Cc: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/20221018095503.never.671-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: a7d6027790ac ("arp: Prevent overflow in arp_req_get().") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01packet: move from strlcpy with unused retval to strscpyWolfram Sang1-2/+2
[ Upstream commit 8fc9d51ea2d32a05f7d7cf86a25cc86ecc57eb45 ] Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20220818210227.8611-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Stable-dep-of: a7d6027790ac ("arp: Prevent overflow in arp_req_get().") Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01ipv6: sr: fix possible use-after-free and null-ptr-derefVasiliy Kovalev1-9/+11
[ Upstream commit 5559cea2d5aa3018a5f00dd2aca3427ba09b386b ] The pernet operations structure for the subsystem must be registered before registering the generic netlink family. Fixes: 915d7e5e5930 ("ipv6: sr: add code base for control plane support of SR-IPv6") Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Link: https://lore.kernel.org/r/20240215202717.29815-1-kovalev@altlinux.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01afs: Increase buffer size in afs_update_volume_status()Daniil Dulov1-2/+2
[ Upstream commit 6ea38e2aeb72349cad50e38899b0ba6fbcb2af3d ] The max length of volume->vid value is 20 characters. So increase idbuf[] size up to 24 to avoid overflow. Found by Linux Verification Center (linuxtesting.org) with SVACE. [DH: Actually, it's 20 + NUL, so increase it to 24 and use snprintf()] Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru> Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20240211150442.3416-1-d.dulov@aladdin.ru/ # v1 Link: https://lore.kernel.org/r/20240212083347.10742-1-d.dulov@aladdin.ru/ # v2 Link: https://lore.kernel.org/r/20240219143906.138346-3-dhowells@redhat.com Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01ipv6: properly combine dev_base_seq and ipv6.dev_addr_genidEric Dumazet1-3/+18
[ Upstream commit e898e4cd1aab271ca414f9ac6e08e4c761f6913c ] net->dev_base_seq and ipv6.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 63998ac24f83 ("ipv6: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01ipv4: properly combine dev_base_seq and ipv4.dev_addr_genidEric Dumazet1-4/+17
[ Upstream commit 081a0e3b0d4c061419d3f4679dec9f68725b17e4 ] net->dev_base_seq and ipv4.dev_addr_genid are monotonically increasing. If we XOR their values, we could miss to detect if both values were changed with the same amount. Fixes: 0465277f6b3f ("ipv4: provide addr and netconf dump consistency info") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Nicolas Dichtel <nicolas.dichtel@6wind.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01nouveau: fix function cast warningsArnd Bergmann1-1/+7
[ Upstream commit 0affdba22aca5573f9d989bcb1d71d32a6a03efe ] clang-16 warns about casting between incompatible function types: drivers/gpu/drm/nouveau/nvkm/subdev/bios/shadow.c:161:10: error: cast from 'void (*)(const struct firmware *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 161 | .fini = (void(*)(void *))release_firmware, This one was done to use the generic shadow_fw_release() function as a callback for struct nvbios_source. Change it to use the same prototype as the other five instances, with a trivial helper function that actually calls release_firmware. Fixes: 70c0f263cc2e ("drm/nouveau/bios: pull in basic vbios subdev, more to come later") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Danilo Krummrich <dakr@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240213095753.455062-1-arnd@kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01scsi: jazz_esp: Only build if SCSI core is builtinRandy Dunlap1-1/+1
[ Upstream commit 9ddf190a7df77b77817f955fdb9c2ae9d1c9c9a3 ] JAZZ_ESP is a bool kconfig symbol that selects SCSI_SPI_ATTRS. When CONFIG_SCSI=m, this results in SCSI_SPI_ATTRS=m while JAZZ_ESP=y, which causes many undefined symbol linker errors. Fix this by only offering to build this driver when CONFIG_SCSI=y. [mkp: JAZZ_ESP is unique in that it does not support being compiled as a module unlike the remaining SPI SCSI HBA drivers] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Link: https://lore.kernel.org/r/20240214055953.9612-1-rdunlap@infradead.org Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de> Cc: Masahiro Yamada <masahiroy@kernel.org> Cc: Nicolas Schier <nicolas@fjasle.eu> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Cc: Geert Uytterhoeven <geert@linux-m68k.org> Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202402112222.Gl0udKyU-lkp@intel.com/ Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01bpf, scripts: Correct GPL license nameGianmarco Lusvardi1-1/+1
[ Upstream commit e37243b65d528a8a9f8b9a57a43885f8e8dfc15c ] The bpf_doc script refers to the GPL as the "GNU Privacy License". I strongly suspect that the author wanted to refer to the GNU General Public License, under which the Linux kernel is released, as, to the best of my knowledge, there is no license named "GNU Privacy License". This patch corrects the license name in the script accordingly. Fixes: 56a092c89505 ("bpf: add script and prepare bpf.h for new helpers documentation") Signed-off-by: Gianmarco Lusvardi <glusvardi@posteo.net> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Quentin Monnet <quentin@isovalent.com> Link: https://lore.kernel.org/bpf/20240213230544.930018-3-glusvardi@posteo.net Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01RDMA/srpt: fix function pointer cast warningsArnd Bergmann1-4/+5
[ Upstream commit eb5c7465c3240151cd42a55c7ace9da0026308a1 ] clang-16 notices that srpt_qp_event() gets called through an incompatible pointer here: drivers/infiniband/ulp/srpt/ib_srpt.c:1815:5: error: cast from 'void (*)(struct ib_event *, struct srpt_rdma_ch *)' to 'void (*)(struct ib_event *, void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict] 1815 | = (void(*)(struct ib_event *, void*))srpt_qp_event; Change srpt_qp_event() to use the correct prototype and adjust the argument inside of it. Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20240213100728.458348-1-arnd@kernel.org Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01arm64: dts: rockchip: set num-cs property for spi on px30Heiko Stuebner1-0/+2
[ Upstream commit 334bf0710c98d391f4067b72f535d6c4c84dfb6f ] The px30 has two spi controllers with two chip-selects each. The num-cs property is specified as the total number of chip selects a controllers has and is used since 2020 to find uses of chipselects outside that range in the Rockchip spi driver. Without the property set, the default is 1, so spi devices using the second chipselect will not be created. Fixes: eb1262e3cc8b ("spi: spi-rockchip: use num-cs property and ctlr->enable_gpiods") Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20240119101656.965744-1-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01RDMA/qedr: Fix qedr_create_user_qp error flowKamal Heib1-1/+10
[ Upstream commit 5ba4e6d5863c53e937f49932dee0ecb004c65928 ] Avoid the following warning by making sure to free the allocated resources in case that qedr_init_user_queue() fail. -----------[ cut here ]----------- WARNING: CPU: 0 PID: 143192 at drivers/infiniband/core/rdma_core.c:874 uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Modules linked in: tls target_core_user uio target_core_pscsi target_core_file target_core_iblock ib_srpt ib_srp scsi_transport_srp nfsd nfs_acl rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs 8021q garp mrp stp llc ext4 mbcache jbd2 opa_vnic ib_umad ib_ipoib sunrpc rdma_ucm ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm hfi1 intel_rapl_msr intel_rapl_common mgag200 qedr sb_edac drm_shmem_helper rdmavt x86_pkg_temp_thermal drm_kms_helper intel_powerclamp ib_uverbs coretemp i2c_algo_bit kvm_intel dell_wmi_descriptor ipmi_ssif sparse_keymap kvm ib_core rfkill syscopyarea sysfillrect video sysimgblt irqbypass ipmi_si ipmi_devintf fb_sys_fops rapl iTCO_wdt mxm_wmi iTCO_vendor_support intel_cstate pcspkr dcdbas intel_uncore ipmi_msghandler lpc_ich acpi_power_meter mei_me mei fuse drm xfs libcrc32c qede sd_mod ahci libahci t10_pi sg crct10dif_pclmul crc32_pclmul crc32c_intel qed libata tg3 ghash_clmulni_intel megaraid_sas crc8 wmi [last unloaded: ib_srpt] CPU: 0 PID: 143192 Comm: fi_rdm_tagged_p Kdump: loaded Not tainted 5.14.0-408.el9.x86_64 #1 Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 2.14.0 01/25/2022 RIP: 0010:uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] Code: 5d 41 5c 41 5d 41 5e e9 0f 26 1b dd 48 89 df e8 67 6a ff ff 49 8b 86 10 01 00 00 48 85 c0 74 9c 4c 89 e7 e8 83 c0 cb dd eb 92 <0f> 0b eb be 0f 0b be 04 00 00 00 48 89 df e8 8e f5 ff ff e9 6d ff RSP: 0018:ffffb7c6cadfbc60 EFLAGS: 00010286 RAX: ffff8f0889ee3f60 RBX: ffff8f088c1a5200 RCX: 00000000802a0016 RDX: 00000000802a0017 RSI: 0000000000000001 RDI: ffff8f0880042600 RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000000000000 R10: ffff8f11fffd5000 R11: 0000000000039000 R12: ffff8f0d5b36cd80 R13: ffff8f088c1a5250 R14: ffff8f1206d91000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff8f11d7c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000147069200e20 CR3: 00000001c7210002 CR4: 00000000001706f0 Call Trace: <TASK> ? show_trace_log_lvl+0x1c4/0x2df ? show_trace_log_lvl+0x1c4/0x2df ? ib_uverbs_close+0x1f/0xb0 [ib_uverbs] ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? __warn+0x81/0x110 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ? report_bug+0x10a/0x140 ? handle_bug+0x3c/0x70 ? exc_invalid_op+0x14/0x70 ? asm_exc_invalid_op+0x16/0x20 ? uverbs_destroy_ufile_hw+0xcf/0xf0 [ib_uverbs] ib_uverbs_close+0x1f/0xb0 [ib_uverbs] __fput+0x94/0x250 task_work_run+0x5c/0x90 do_exit+0x270/0x4a0 do_group_exit+0x2d/0x90 get_signal+0x87c/0x8c0 arch_do_signal_or_restart+0x25/0x100 ? ib_uverbs_ioctl+0xc2/0x110 [ib_uverbs] exit_to_user_mode_loop+0x9c/0x130 exit_to_user_mode_prepare+0xb6/0x100 syscall_exit_to_user_mode+0x12/0x40 do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? syscall_exit_work+0x103/0x130 ? syscall_exit_to_user_mode+0x22/0x40 ? do_syscall_64+0x69/0x90 ? do_syscall_64+0x69/0x90 ? common_interrupt+0x43/0xa0 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x1470abe3ec6b Code: Unable to access opcode bytes at RIP 0x1470abe3ec41. RSP: 002b:00007fff13ce9108 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: fffffffffffffffc RBX: 00007fff13ce9218 RCX: 00001470abe3ec6b RDX: 00007fff13ce9200 RSI: 00000000c0181b01 RDI: 0000000000000004 RBP: 00007fff13ce91e0 R08: 0000558d9655da10 R09: 0000558d9655dd00 R10: 00007fff13ce95c0 R11: 0000000000000246 R12: 00007fff13ce9358 R13: 0000000000000013 R14: 0000558d9655db50 R15: 00007fff13ce9470 </TASK> --[ end trace 888a9b92e04c5c97 ]-- Fixes: df15856132bc ("RDMA/qedr: restructure functions that create/destroy QPs") Signed-off-by: Kamal Heib <kheib@redhat.com> Link: https://lore.kernel.org/r/20240208223628.2040841-1-kheib@redhat.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01RDMA/srpt: Support specifying the srpt_service_guid parameterBart Van Assche1-2/+6
[ Upstream commit fdfa083549de5d50ebf7f6811f33757781e838c0 ] Make loading ib_srpt with this parameter set work. The current behavior is that setting that parameter while loading the ib_srpt kernel module triggers the following kernel crash: BUG: kernel NULL pointer dereference, address: 0000000000000000 Call Trace: <TASK> parse_one+0x18c/0x1d0 parse_args+0xe1/0x230 load_module+0x8de/0xa60 init_module_from_file+0x8b/0xd0 idempotent_init_module+0x181/0x240 __x64_sys_finit_module+0x5a/0xb0 do_syscall_64+0x5f/0xe0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Cc: LiHonggang <honggangli@163.com> Reported-by: LiHonggang <honggangli@163.com> Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1") Signed-off-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240205004207.17031-1-bvanassche@acm.org Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01RDMA/bnxt_re: Return error for SRQ resizeKalesh AP1-3/+2
[ Upstream commit 3687b450c5f32e80f179ce4b09e0454da1449eac ] SRQ resize is not supported in the driver. But driver is not returning error from bnxt_re_modify_srq() for SRQ resize. Fixes: 37cb11acf1f7 ("RDMA/bnxt_re: Add SRQ support for Broadcom adapters") Signed-off-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Link: https://lore.kernel.org/r/1705985677-15551-5-git-send-email-selvin.xavier@broadcom.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01IB/hfi1: Fix a memleak in init_credit_returnZhipeng Lu1-1/+5
[ Upstream commit 809aa64ebff51eb170ee31a95f83b2d21efa32e2 ] When dma_alloc_coherent fails to allocate dd->cr_base[i].va, init_credit_return should deallocate dd->cr_base and dd->cr_base[i] that allocated before. Or those resources would be never freed and a memleak is triggered. Fixes: 7724105686e7 ("IB/hfi1: add driver files") Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn> Link: https://lore.kernel.org/r/20240112085523.3731720-1-alexious@zju.edu.cn Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2024-03-01mptcp: fix lockless access in subflow ULP diagPaolo Abeni3-3/+7
commit b8adb69a7d29c2d33eb327bca66476fb6066516b upstream. Since the introduction of the subflow ULP diag interface, the dump callback accessed all the subflow data with lockless. We need either to annotate all the read and write operation accordingly, or acquire the subflow socket lock. Let's do latter, even if slower, to avoid a diffstat havoc. Fixes: 5147dfb50832 ("mptcp: allow dumping subflow context to userspace") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01usb: roles: don't get/set_role() when usb_role_switch is unregisteredXu Yang1-2/+10
commit b787a3e781759026a6212736ef8e52cf83d1821a upstream. There is a possibility that usb_role_switch device is unregistered before the user put usb_role_switch. In this case, the user may still want to get/set_role() since the user can't sense the changes of usb_role_switch. This will add a flag to show if usb_role_switch is already registered and avoid unwanted behaviors. Fixes: fde0aa6c175a ("usb: common: Small class for USB role switches") cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01usb: roles: fix NULL pointer issue when put module's referenceXu Yang1-6/+11
commit 1c9be13846c0b2abc2480602f8ef421360e1ad9e upstream. In current design, usb role class driver will get usb_role_switch parent's module reference after the user get usb_role_switch device and put the reference after the user put the usb_role_switch device. However, the parent device of usb_role_switch may be removed before the user put the usb_role_switch. If so, then, NULL pointer issue will be met when the user put the parent module's reference. This will save the module pointer in structure of usb_role_switch. Then, we don't need to find module by iterating long relations. Fixes: 5c54fcac9a9d ("usb: roles: Take care of driver module reference counting") cc: stable@vger.kernel.org Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20240129093739.2371530-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBsKrishna Kurapati1-1/+9
commit 76c51146820c5dac629f21deafab0a7039bc3ccd upstream. It is observed sometimes when tethering is used over NCM with Windows 11 as host, at some instances, the gadget_giveback has one byte appended at the end of a proper NTB. When the NTB is parsed, unwrap call looks for any leftover bytes in SKB provided by u_ether and if there are any pending bytes, it treats them as a separate NTB and parses it. But in case the second NTB (as per unwrap call) is faulty/corrupt, all the datagrams that were parsed properly in the first NTB and saved in rx_list are dropped. Adding a few custom traces showed the following: [002] d..1 7828.532866: dwc3_gadget_giveback: ep1out: req 000000003868811a length 1025/16384 zsI ==> 0 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb toprocess: 1025 [002] d..1 7828.532867: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb seq: 0xce67 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x400 [002] d..1 7828.532868: ncm_unwrap_ntb: K: ncm_unwrap_ntb ndp_len: 0x10 [002] d..1 7828.532869: ncm_unwrap_ntb: K: Parsed NTB with 1 frames In this case, the giveback is of 1025 bytes and block length is 1024. The rest 1 byte (which is 0x00) won't be parsed resulting in drop of all datagrams in rx_list. Same is case with packets of size 2048: [002] d..1 7828.557948: dwc3_gadget_giveback: ep1out: req 0000000011dfd96e length 2049/16384 zsI ==> 0 [002] d..1 7828.557949: ncm_unwrap_ntb: K: ncm_unwrap_ntb nth: 1751999342 [002] d..1 7828.557950: ncm_unwrap_ntb: K: ncm_unwrap_ntb blk_len: 0x800 Lecroy shows one byte coming in extra confirming that the byte is coming in from PC: Transfer 2959 - Bytes Transferred(1025) Timestamp((18.524 843 590) - Transaction 8391 - Data(1025 bytes) Timestamp(18.524 843 590) --- Packet 4063861 Data(1024 bytes) Duration(2.117us) Idle(14.700ns) Timestamp(18.524 843 590) --- Packet 4063863 Data(1 byte) Duration(66.160ns) Time(282.000ns) Timestamp(18.524 845 722) According to Windows driver, no ZLP is needed if wBlockLength is non-zero, because the non-zero wBlockLength has already told the function side the size of transfer to be expected. However, there are in-market NCM devices that rely on ZLP as long as the wBlockLength is multiple of wMaxPacketSize. To deal with such devices, it pads an extra 0 at end so the transfer is no longer multiple of wMaxPacketSize. Cc: <stable@vger.kernel.org> Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com> Reviewed-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20240205074650.200304-1-quic_kriskura@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01usb: cdns3: fix memory double free when handle zero packetFrank Li1-1/+5
commit 5fd9e45f1ebcd57181358af28506e8a661a260b3 upstream. 829 if (request->complete) { 830 spin_unlock(&priv_dev->lock); 831 usb_gadget_giveback_request(&priv_ep->endpoint, 832 request); 833 spin_lock(&priv_dev->lock); 834 } 835 836 if (request->buf == priv_dev->zlp_buf) 837 cdns3_gadget_ep_free_request(&priv_ep->endpoint, request); Driver append an additional zero packet request when queue a packet, which length mod max packet size is 0. When transfer complete, run to line 831, usb_gadget_giveback_request() will free this requestion. 836 condition is true, so cdns3_gadget_ep_free_request() free this request again. Log: [ 1920.140696][ T150] BUG: KFENCE: use-after-free read in cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.140696][ T150] [ 1920.151837][ T150] Use-after-free read at 0x000000003d1cd10b (in kfence-#36): [ 1920.159082][ T150] cdns3_gadget_giveback+0x134/0x2c0 [cdns3] [ 1920.164988][ T150] cdns3_transfer_completed+0x438/0x5f8 [cdns3] Add check at line 829, skip call usb_gadget_giveback_request() if it is additional zero length packet request. Needn't call usb_gadget_giveback_request() because it is allocated in this driver. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-2-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()Frank Li1-1/+1
commit cd45f99034b0c8c9cb346dd0d6407a95ca3d36f6 upstream. ... cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ... 'priv_req' actually free at cdns3_gadget_ep_free_request(). But list_del_init() use priv_req->list after it. [ 1542.642868][ T534] BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xd4 [ 1542.642868][ T534] [ 1542.653162][ T534] Use-after-free read at 0x000000009ed0ba99 (in kfence-#3): [ 1542.660311][ T534] __list_del_entry_valid+0x10/0xd4 [ 1542.665375][ T534] cdns3_gadget_ep_disable+0x1f8/0x388 [cdns3] [ 1542.671571][ T534] usb_ep_disable+0x44/0xe4 [ 1542.675948][ T534] ffs_func_eps_disable+0x64/0xc8 [ 1542.680839][ T534] ffs_func_set_alt+0x74/0x368 [ 1542.685478][ T534] ffs_func_disable+0x18/0x28 Move list_del_init() before cdns3_gadget_ep_free_request() to resolve this problem. Cc: stable@vger.kernel.org Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: Roger Quadros <rogerq@kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Link: https://lore.kernel.org/r/20240202154217.661867-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01x86/alternative: Make custom return thunk unconditionalPeter Zijlstra3-8/+6
Upstream commit: 095b8303f3835c68ac4a8b6d754ca1c3b6230711 There is infrastructure to rewrite return thunks to point to any random thunk one desires, unwrap that from CALL_THUNKS, which up to now was the sole user of that. [ bp: Make the thunks visible on 32-bit and add ifdeffery for the 32-bit builds. ] Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Link: https://lore.kernel.org/r/20230814121148.775293785@infradead.org Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01Revert "x86/alternative: Make custom return thunk unconditional"Borislav Petkov (AMD)2-8/+0
This reverts commit 08f7cfd44f77b2796582bc26164fdef44dd33b6c. Revert the backport of upstream commit: 095b8303f383 ("x86/alternative: Make custom return thunk unconditional") in order to backport the full version now that 770ae1b70952 ("x86/returnthunk: Allow different return thunks") has been backported. Revert it here so that the build breakage is kept at minimum. Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01x86/returnthunk: Allow different return thunksPeter Zijlstra6-7/+24
Upstream commit: 770ae1b709528a6a173b5c7b183818ee9b45e376 In preparation for call depth tracking on Intel SKL CPUs, make it possible to patch in a SKL specific return thunk. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220915111147.680469665@infradead.org Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01x86/ftrace: Use alternative RET encodingPeter Zijlstra1-2/+5
Upstream commit: 1f001e9da6bbf482311e45e48f53c2bd2179e59c Use the return thunk in ftrace trampolines, if needed. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01x86/ibt,paravirt: Use text_gen_insn() for paravirt_patch()Peter Zijlstra2-23/+19
Upstream commit: ba27d1a80871eb8dbeddf34ec7d396c149cbb8d7 Less duplication is more better. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154317.697253958@infradead.org [ Keep struct branch. ] Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01x86/text-patching: Make text_gen_insn() play nice with ANNOTATE_NOENDBRPeter Zijlstra1-1/+9
Upstream commit: bbf92368b0b1fe472d489e62d3340d7897e9c697 Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Josh Poimboeuf <jpoimboe@redhat.com> Link: https://lore.kernel.org/r/20220308154317.638561109@infradead.org Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01Revert "x86/ftrace: Use alternative RET encoding"Borislav Petkov (AMD)1-7/+2
This reverts commit 3eb602ad6a94a76941f93173131a71ad36fa1324. Revert the backport of upstream commit 1f001e9da6bb ("x86/ftrace: Use alternative RET encoding") in favor of a proper backport after backporting the commit which adds __text_gen_insn(). Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01ARM: ep93xx: Add terminator to gpiod_lookup_tableNikita Shubin1-0/+1
commit fdf87a0dc26d0550c60edc911cda42f9afec3557 upstream. Without the terminator, if a con_id is passed to gpio_find() that does not exist in the lookup table the function will not stop looping correctly, and eventually cause an oops. Cc: stable@vger.kernel.org Fixes: b2e63555592f ("i2c: gpio: Convert to use descriptors") Reported-by: Andy Shevchenko <andriy.shevchenko@intel.com> Signed-off-by: Nikita Shubin <nikita.shubin@maquefel.me> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com> Link: https://lore.kernel.org/r/20240205102337.439002-1-alexander.sverdlin@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01l2tp: pass correct message length to ip6_append_dataTom Parkin1-1/+1
commit 359e54a93ab43d32ee1bff3c2f9f10cb9f6b6e79 upstream. l2tp_ip6_sendmsg needs to avoid accounting for the transport header twice when splicing more data into an already partially-occupied skbuff. To manage this, we check whether the skbuff contains data using skb_queue_empty when deciding how much data to append using ip6_append_data. However, the code which performed the calculation was incorrect: ulen = len + skb_queue_empty(&sk->sk_write_queue) ? transhdrlen : 0; ...due to C operator precedence, this ends up setting ulen to transhdrlen for messages with a non-zero length, which results in corrupted packets on the wire. Add parentheses to correct the calculation in line with the original intent. Fixes: 9d4c75800f61 ("ipv4, ipv6: Fix handling of transhdrlen in __ip{,6}_append_data()") Cc: David Howells <dhowells@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Tom Parkin <tparkin@katalix.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240220122156.43131-1-tparkin@katalix.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01PCI/MSI: Prevent MSI hardware interrupt number truncationVidya Sagar1-1/+1
commit db744ddd59be798c2627efbfc71f707f5a935a40 upstream. While calculating the hardware interrupt number for a MSI interrupt, the higher bits (i.e. from bit-5 onwards a.k.a domain_nr >= 32) of the PCI domain number gets truncated because of the shifted value casting to return type of pci_domain_nr() which is 'int'. This for example is resulting in same hardware interrupt number for devices 0019:00:00.0 and 0039:00:00.0. To address this cast the PCI domain number to 'irq_hw_number_t' before left shifting it to calculate the hardware interrupt number. Please note that this fixes the issue only on 64-bit systems and doesn't change the behavior for 32-bit systems i.e. the 32-bit systems continue to have the issue. Since the issue surfaces only if there are too many PCIe controllers in the system which usually is the case in modern server systems and they don't tend to run 32-bit kernels. Fixes: 3878eaefb89a ("PCI/MSI: Enhance core to support hierarchy irqdomain") Signed-off-by: Vidya Sagar <vidyas@nvidia.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Shanker Donthineni <sdonthineni@nvidia.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240115135649.708536-1-vidyas@nvidia.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01gtp: fix use-after-free and null-ptr-deref in gtp_genl_dump_pdp()Vasiliy Kovalev1-5/+5
commit 136cfaca22567a03bbb3bf53a43d8cb5748b80ec upstream. The gtp_net_ops pernet operations structure for the subsystem must be registered before registering the generic netlink family. Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 1 PID: 5826 Comm: gtp Not tainted 6.8.0-rc3-std-def-alt1 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014 RIP: 0010:gtp_genl_dump_pdp+0x1be/0x800 [gtp] Code: c6 89 c6 e8 64 e9 86 df 58 45 85 f6 0f 85 4e 04 00 00 e8 c5 ee 86 df 48 8b 54 24 18 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 de 05 00 00 48 8b 44 24 18 4c 8b 30 4c 39 f0 74 RSP: 0018:ffff888014107220 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000002 RSI: 0000000000000000 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff88800fcda588 R14: 0000000000000001 R15: 0000000000000000 FS: 00007f1be4eb05c0(0000) GS:ffff88806ce80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f1be4e766cf CR3: 000000000c33e000 CR4: 0000000000750ef0 PKRU: 55555554 Call Trace: <TASK> ? show_regs+0x90/0xa0 ? die_addr+0x50/0xd0 ? exc_general_protection+0x148/0x220 ? asm_exc_general_protection+0x22/0x30 ? gtp_genl_dump_pdp+0x1be/0x800 [gtp] ? __alloc_skb+0x1dd/0x350 ? __pfx___alloc_skb+0x10/0x10 genl_dumpit+0x11d/0x230 netlink_dump+0x5b9/0xce0 ? lockdep_hardirqs_on_prepare+0x253/0x430 ? __pfx_netlink_dump+0x10/0x10 ? kasan_save_track+0x10/0x40 ? __kasan_kmalloc+0x9b/0xa0 ? genl_start+0x675/0x970 __netlink_dump_start+0x6fc/0x9f0 genl_family_rcv_msg_dumpit+0x1bb/0x2d0 ? __pfx_genl_family_rcv_msg_dumpit+0x10/0x10 ? genl_op_from_small+0x2a/0x440 ? cap_capable+0x1d0/0x240 ? __pfx_genl_start+0x10/0x10 ? __pfx_genl_dumpit+0x10/0x10 ? __pfx_genl_done+0x10/0x10 ? security_capable+0x9d/0xe0 Cc: stable@vger.kernel.org Signed-off-by: Vasiliy Kovalev <kovalev@altlinux.org> Fixes: 459aa660eb1d ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Link: https://lore.kernel.org/r/20240214162733.34214-1-kovalev@altlinux.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01KVM: arm64: vgic-its: Test for valid IRQ in its_sync_lpi_pending_table()Oliver Upton1-0/+3
commit 8d3a7dfb801d157ac423261d7cd62c33e95375f8 upstream. vgic_get_irq() may not return a valid descriptor if there is no ITS that holds a valid translation for the specified INTID. If that is the case, it is safe to silently ignore it and continue processing the LPI pending table. Cc: stable@vger.kernel.org Fixes: 33d3bc9556a7 ("KVM: arm64: vgic-its: Read initial LPI pending table") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240221092732.4126848-2-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01KVM: arm64: vgic-its: Test for valid IRQ in MOVALL handlerOliver Upton1-0/+2
commit 85a71ee9a0700f6c18862ef3b0011ed9dad99aca upstream. It is possible that an LPI mapped in a different ITS gets unmapped while handling the MOVALL command. If that is the case, there is no state that can be migrated to the destination. Silently ignore it and continue migrating other LPIs. Cc: stable@vger.kernel.org Fixes: ff9c114394aa ("KVM: arm/arm64: GICv4: Handle MOVALL applied to a vPE") Signed-off-by: Oliver Upton <oliver.upton@linux.dev> Link: https://lore.kernel.org/r/20240221092732.4126848-3-oliver.upton@linux.dev Signed-off-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01dm-crypt: don't modify the data when using authenticated encryptionMikulas Patocka1-0/+6
commit 50c70240097ce41fe6bce6478b80478281e4d0f7 upstream. It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/ Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01s390/cio: fix invalid -EBUSY on ccw_device_startPeter Oberparleiter1-3/+3
commit 5ef1dc40ffa6a6cb968b0fdc43c3a61727a9e950 upstream. The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code when drivers try to start I/O while a path-verification (PV) process is pending. This can lead to failed device initialization attempts with symptoms like broken network connectivity after boot. Fix this by replacing the -EBUSY return code with a deferred condition code 1 reply to make path-verification handling consistent from a driver's point of view. The problem can be reproduced semi-regularly using the following process, while repeating steps 2-3 as necessary (example assumes an OSA device with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02): 1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group 2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online 3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \ echo on > /sys/devices/css0/chp0.02/status Background information: The common I/O layer starts path-verification I/Os when it receives indications about changes in a device path's availability. This occurs for example when hardware events indicate a change in channel-path status, or when a manual operation such as a CHPID vary or configure operation is performed. If a driver attempts to start I/O while a PV is running, CIO reports a successful I/O start (ccw_device_start() return code 0). Then, after completion of PV, CIO synthesizes an interrupt response that indicates an asynchronous status condition that prevented the start of the I/O (deferred condition code 1). If a PV indication arrives while a device is busy with driver-owned I/O, PV is delayed until after I/O completion was reported to the driver's interrupt handler. To ensure that PV can be started eventually, CIO reports a device busy condition (ccw_device_start() return code -EBUSY) if a driver tries to start another I/O while PV is pending. In some cases this -EBUSY return code causes device drivers to consider a device not operational, resulting in failed device initialization. Note: The code that introduced the problem was added in 2003. Symptoms started appearing with the following CIO commit that causes a PV indication when a device is removed from the cio_ignore list after the associated parent subchannel device was probed, but before online processing of the CCW device has started: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") During boot, the cio_ignore list is modified by the cio_ignore dracut module [1] as well as Linux vendor-specific systemd service scripts[2]. When combined, this commit and boot scripts cause a frequent occurrence of the problem during boot. [1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore [2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service Cc: stable@vger.kernel.org # v5.15+ Fixes: 2297791c92d0 ("s390/cio: dont unregister subchannel from child-drivers") Tested-By: Thorsten Winkler <twinkler@linux.ibm.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-03-01IB/hfi1: Fix sdma.h tx->num_descs off-by-one errorDaniel Vacek1-1/+1
commit e6f57c6881916df39db7d95981a8ad2b9c3458d6 upstream. Unfortunately the commit `fd8958efe877` introduced another error causing the `descs` array to overflow. This reults in further crashes easily reproducible by `sendmsg` system call. [ 1080.836473] general protection fault, probably for non-canonical address 0x400300015528b00a: 0000 [#1] PREEMPT SMP PTI [ 1080.869326] RIP: 0010:hfi1_ipoib_build_ib_tx_headers.constprop.0+0xe1/0x2b0 [hfi1] -- [ 1080.974535] Call Trace: [ 1080.976990] <TASK> [ 1081.021929] hfi1_ipoib_send_dma_common+0x7a/0x2e0 [hfi1] [ 1081.027364] hfi1_ipoib_send_dma_list+0x62/0x270 [hfi1] [ 1081.032633] hfi1_ipoib_send+0x112/0x300 [hfi1] [ 1081.042001] ipoib_start_xmit+0x2a9/0x2d0 [ib_ipoib] [ 1081.046978] dev_hard_start_xmit+0xc4/0x210 -- [ 1081.148347] __sys_sendmsg+0x59/0xa0 crash> ipoib_txreq 0xffff9cfeba229f00 struct ipoib_txreq { txreq = { list = { next = 0xffff9cfeba229f00, prev = 0xffff9cfeba229f00 }, descp = 0xffff9cfeba229f40, coalesce_buf = 0x0, wait = 0xffff9cfea4e69a48, complete = 0xffffffffc0fe0760 <hfi1_ipoib_sdma_complete>, packet_len = 0x46d, tlen = 0x0, num_desc = 0x0, desc_limit = 0x6, next_descq_idx = 0x45c, coalesce_idx = 0x0, flags = 0x0, descs = {{ qw = {0x8024000120dffb00, 0x4} # SDMA_DESC0_FIRST_DESC_FLAG (bit 63) }, { qw = { 0x3800014231b108, 0x4} }, { qw = { 0x310000e4ee0fcf0, 0x8} }, { qw = { 0x3000012e9f8000, 0x8} }, { qw = { 0x59000dfb9d0000, 0x8} }, { qw = { 0x78000e02e40000, 0x8} }} }, sdma_hdr = 0x400300015528b000, <<< invalid pointer in the tx request structure sdma_status = 0x0, SDMA_DESC0_LAST_DESC_FLAG (bit 62) complete = 0x0, priv = 0x0, txq = 0xffff9cfea4e69880, skb = 0xffff9d099809f400 } If an SDMA send consists of exactly 6 descriptors and requires dword padding (in the 7th descriptor), the sdma_txreq descriptor array is not properly expanded and the packet will overflow into the container structure. This results in a panic when the send completion runs. The exact panic varies depending on what elements of the container structure get corrupted. The fix is to use the correct expression in _pad_sdma_tx_descs() to test the need to expand the descriptor array. With this patch the crashes are no longer reproducible and the machine is stable. Fixes: fd8958efe877 ("IB/hfi1: Fix sdma.h tx->num_descs off-by-one errors") Cc: stable@vger.kernel.org Reported-by: Mats Kronberg <kronberg@nsc.liu.se> Tested-by: Mats Kronberg <kronberg@nsc.liu.se> Signed-off-by: Daniel Vacek <neelx@redhat.com> Link: https://lore.kernel.org/r/20240201081009.1109442-1-neelx@redhat.com Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-01-11 14:30:44 +0300