summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-28ALSA: hda/realtek: Add quirk for Huawei WRT-WX9huangwenhui1-0/+1
commit cbcdf8c4d35cd74aee8581eb2f0453e0ecab7b05 upstream. Fixes headphone and headset microphone detection on Huawei WRT-WX9. Signed-off-by: huangwenhui <huangwenhuia@uniontech.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220913054622.15979-1-huangwenhuia@uniontech.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28ALSA: hda: add Intel 5 Series / 3400 PCI DIDKai Vehmanen1-0/+2
commit 4d40ceef4745536289012670103c59264e0fb3ec upstream. Handle 0x3b57 variant with same AZX_DCAPS_INTEL_PCH_NOPM capabilities as 0x3b56. In practise this allow use of HDMI/DP display audio via i915. BugLink: https://gitlab.freedesktop.org/drm/intel/-/issues/2751 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220912183716.2126312-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28ALSA: hda/tegra: set depop delay for tegraMohan Kumar1-0/+1
commit 3c4d8c24fb6c44f426e447b04800b0ed61a7b5ae upstream. Reduce the suspend time by setting depop delay to 10ms for tegra. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220913053641.23299-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28USB: serial: option: add Quectel RM520Njerry meng1-0/+4
commit d640c4cb8f2f933c0ca896541f9de7fb1ae245f4 upstream. add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry meng <jerry-meng@foxmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28USB: serial: option: add Quectel BG95 0x0203 compositionCarl Yin(殷张成)1-0/+2
commit f8f67eff6847f9b8d753fa029723bcc54296055a upstream. Add support for the following Quectel BG95 composition: 0x0203: Diag + GNSS + Modem + ECM usb-devices output: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0203 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=71d3a21b C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=60 Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Carl Yin <carl.yin@quectel.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28USB: core: Fix RST error in hub.cAlan Stern1-1/+1
commit 766a96dc558385be735a370db867e302c8f22153 upstream. A recent commit added an invalid RST expression to a kerneldoc comment in hub.c. The fix is trivial. Fixes: 9c6d778800b9 ("USB: core: Prevent nested device-reset calls") Cc: <stable@vger.kernel.org> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YxDDcsLtRZ7c20pq@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-28arm64/bti: Disable in kernel BTI when cross section thunks are brokenMark Brown1-0/+2
[ Upstream commit c0a454b9044fdc99486853aa424e5b3be2107078 ] GCC does not insert a `bti c` instruction at the beginning of a function when it believes that all callers reach the function through a direct branch[1]. Unfortunately the logic it uses to determine this is not sufficiently robust, for example not taking account of functions being placed in different sections which may be loaded separately, so we may still see thunks being generated to these functions. If that happens, the first instruction in the callee function will result in a Branch Target Exception due to the missing landing pad. While this has currently only been observed in the case of modules having their main code loaded sufficiently far from their init section to require thunks it could potentially happen for other cases so the safest thing is to disable BTI for the kernel when building with an affected toolchain. [1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=106671 Reported-by: D Scott Phillips <scott@os.amperecomputing.com> [Bits of the commit message are lifted from his report & workaround] Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20220905142255.591990-1-broonie@kernel.org Cc: <stable@vger.kernel.org> # v5.10+ Signed-off-by: Will Deacon <will@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28arm64: Restrict ARM64_BTI_KERNEL to clang 12.0.0 and newerNathan Chancellor1-1/+2
[ Upstream commit 8cdd23c23c3d481a43b4aa03dcb5738812831115 ] Commit 97fed779f2a6 ("arm64: bti: Provide Kconfig for kernel mode BTI") disabled CONFIG_ARM64_BTI_KERNEL when CONFIG_GCOV_KERNEL was enabled and compiling with clang because of warnings that were seen with allmodconfig because LLVM was not emitting PAC/BTI instructions for compiler generated functions: | warning: some functions compiled with BTI and some compiled without BTI | warning: not setting BTI in feature flags This dependency was fine for avoiding the warnings with allmodconfig until commit 51c2ee6d121c ("Kconfig: Introduce ARCH_WANTS_NO_INSTR and CC_HAS_NO_PROFILE_FN_ATTR"), which prevents CONFIG_GCOV_KERNEL from being enabled with clang 12.0.0 or older because those versions do not support the no_profile_instrument_function attribute. As a result, CONFIG_ARM64_BTI_KERNEL gets enabled with allmodconfig and there are more warnings like the ones above due to CONFIG_KASAN, which suffers from the same problem as CONFIG_GCOV_KERNEL. This was most likely not noticed at the time because allmodconfig + CONFIG_GCOV_KERNEL=n was not tested. defconfig + CONFIG_KASAN=y is enough to reproduce the same warnings as above. The root cause of the warnings was resolved in LLVM during the 12.0.0 release so rather than play whack-a-mole with the dependencies, just update CONFIG_ARM64_BTI_KERNEL to require clang 12.0.0, which will have all of the issues ironed out. Link: https://github.com/ClangBuiltLinux/linux/issues/1428 Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010034706?check_suite_focus=true Link: https://github.com/ClangBuiltLinux/continuous-integration2/runs/3010035725?check_suite_focus=true Link: https://github.com/llvm/llvm-project/commit/a88c722e687e6780dcd6a58718350dc76fcc4cc9 Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Link: https://lore.kernel.org/r/20210712214636.3134425-1-nathan@kernel.org Signed-off-by: Will Deacon <will@kernel.org> Stable-dep-of: c0a454b9044f ("arm64/bti: Disable in kernel BTI when cross section thunks are broken") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28Revert "usb: gadget: udc-xilinx: replace memcpy with memcpy_toio"Greg Kroah-Hartman1-8/+8
[ Upstream commit fe0a2ac7c627b064c479ad0c3b25e531d342e048 ] This reverts commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b as it throws up a bunch of sparse warnings as reported by the kernel test robot. Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/202209020044.CX2PfZzM-lkp@intel.com Fixes: 8cb339f1c1f0 ("usb: gadget: udc-xilinx: replace memcpy with memcpy_toio") Cc: stable@vger.kernel.org Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Piyush Mehta <piyush.mehta@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28vfio/type1: Unpin zero pagesAlex Williamson1-0/+12
[ Upstream commit 873aefb376bbc0ed1dd2381ea1d6ec88106fdbd4 ] There's currently a reference count leak on the zero page. We increment the reference via pin_user_pages_remote(), but the page is later handled as an invalid/reserved page, therefore it's not accounted against the user and not unpinned by our put_pfn(). Introducing special zero page handling in put_pfn() would resolve the leak, but without accounting of the zero page, a single user could still create enough mappings to generate a reference count overflow. The zero page is always resident, so for our purposes there's no reason to keep it pinned. Therefore, add a loop to walk pages returned from pin_user_pages_remote() and unpin any zero pages. Cc: stable@vger.kernel.org Reported-by: Luboslav Pivarc <lpivarc@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/166182871735.3518559.8884121293045337358.stgit@omen Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28vfio/type1: Prepare for batched pinning with struct vfio_batchDaniel Jordan1-13/+58
[ Upstream commit 4b6c33b3229678e38a6b0bbd4367d4b91366b523 ] Get ready to pin more pages at once with struct vfio_batch, which represents a batch of pinned pages. The struct has a fallback page pointer to avoid two unlikely scenarios: pointlessly allocating a page if disable_hugepages is enabled or failing the whole pinning operation if the kernel can't allocate memory. vaddr_get_pfn() becomes vaddr_get_pfns() to prepare for handling multiple pages, though for now only one page is stored in the pages array. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Stable-dep-of: 873aefb376bb ("vfio/type1: Unpin zero pages") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28vfio/type1: Change success value of vaddr_get_pfn()Daniel Jordan1-7/+14
[ Upstream commit be16c1fd99f41abebc0bf965d5d29cd18c9d271e ] vaddr_get_pfn() simply returns 0 on success. Have it report the number of pfns successfully gotten instead, whether from page pinning or follow_fault_pfn(), which will be used later when batching pinning. Change the last check in vfio_pin_pages_remote() for consistency with the other two. Signed-off-by: Daniel Jordan <daniel.m.jordan@oracle.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Stable-dep-of: 873aefb376bb ("vfio/type1: Unpin zero pages") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28Revert "usb: add quirks for Lenovo OneLink+ Dock"Greg Kroah-Hartman1-4/+0
[ Upstream commit 58bfe7d8e31014d7ce246788df99c56e3cfe6c68 ] This reverts commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58. The quirk does not work properly, more work is needed to determine what should be done here. Reported-by: Oliver Neukum <oneukum@suse.com> Cc: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Fixes: 3d5f70949f1b ("usb: add quirks for Lenovo OneLink+ Dock") Link: https://lore.kernel.org/r/9a17ea86-079f-510d-e919-01bc53a6d09f@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: cdns3: fix issue with rearming ISO OUT endpointPawel Laszczak1-0/+1
[ Upstream commit b46a6b09fa056042a302b181a1941f0056944603 ] ISO OUT endpoint is enabled during queuing first usb request in transfer ring and disabled when TRBERR is reported by controller. After TRBERR and before next transfer added to TR driver must again reenable endpoint but does not. To solve this issue during processing TRBERR event driver must set the flag EP_UPDATE_EP_TRBADDR in priv_ep->flags field. Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062137.5766-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: cdns3: fix incorrect handling TRB_SMM flag for ISOC transferPawel Laszczak1-1/+2
[ Upstream commit d5dcc33677d7415c5f23b3c052f9e80cbab9ea4e ] The TRB_SMM flag indicates that DMA has completed the TD service with this TRB. Usually it’s a last TRB in TD. In case of ISOC transfer for bInterval > 1 each ISOC transfer contains more than one TD associated with usb request (one TD per ITP). In such case the TRB_SMM flag will be set in every TD and driver will recognize the end of transfer after processing the first TD with TRB_SMM. In result driver stops updating request->actual and returns incorrect actual length. To fix this issue driver additionally must check TRB_CHAIN which is not used for isochronous transfers. Fixes: 249f0a25e8be ("usb: cdns3: gadget: handle sg list use case at completion correctly") cc: <stable@vger.kernel.org> Acked-by: Peter Chen <peter.chen@kernel.org> Signed-off-by: Pawel Laszczak <pawell@cadence.com> Link: https://lore.kernel.org/r/20220825062207.5824-1-pawell@cadence.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: gadget: udc-xilinx: replace memcpy with memcpy_toioPiyush Mehta1-8/+8
[ Upstream commit 8cb339f1c1f04baede9d54c1e40ac96247a6393b ] For ARM processor, unaligned access to device memory is not allowed. Method memcpy does not take care of alignment. USB detection failure with the unaligned address of memory access, with below kernel crash. To fix the unaligned address the kernel panic issue, replace memcpy with memcpy_toio method. Kernel crash: Unable to handle kernel paging request at virtual address ffff80000c05008a Mem abort info: ESR = 0x96000061 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 FSC = 0x21: alignment fault Data abort info: ISV = 0, ISS = 0x00000061 CM = 0, WnR = 1 swapper pgtable: 4k pages, 48-bit VAs, pgdp=000000000143b000 [ffff80000c05008a] pgd=100000087ffff003, p4d=100000087ffff003, pud=100000087fffe003, pmd=1000000800bcc003, pte=00680000a0010713 Internal error: Oops: 96000061 [#1] SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.15.19-xilinx-v2022.1 #1 Hardware name: ZynqMP ZCU102 Rev1.0 (DT) pstate: 200000c5 (nzCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __memcpy+0x30/0x260 lr : __xudc_ep0_queue+0xf0/0x110 sp : ffff800008003d00 x29: ffff800008003d00 x28: ffff800009474e80 x27: 00000000000000a0 x26: 0000000000000100 x25: 0000000000000012 x24: ffff000800bc8080 x23: 0000000000000001 x22: 0000000000000012 x21: ffff000800bc8080 x20: 0000000000000012 x19: ffff000800bc8080 x18: 0000000000000000 x17: ffff800876482000 x16: ffff800008004000 x15: 0000000000004000 x14: 00001f09785d0400 x13: 0103020101005567 x12: 0781400000000200 x11: 00000000c5672a10 x10: 00000000000008d0 x9 : ffff800009463cf0 x8 : ffff8000094757b0 x7 : 0201010055670781 x6 : 4000000002000112 x5 : ffff80000c05009a x4 : ffff000800a15012 x3 : ffff00080362ad80 x2 : 0000000000000012 x1 : ffff000800a15000 x0 : ffff80000c050088 Call trace: __memcpy+0x30/0x260 xudc_ep0_queue+0x3c/0x60 usb_ep_queue+0x38/0x44 composite_ep0_queue.constprop.0+0x2c/0xc0 composite_setup+0x8d0/0x185c configfs_composite_setup+0x74/0xb0 xudc_irq+0x570/0xa40 __handle_irq_event_percpu+0x58/0x170 handle_irq_event+0x60/0x120 handle_fasteoi_irq+0xc0/0x220 handle_domain_irq+0x60/0x90 gic_handle_irq+0x74/0xa0 call_on_irq_stack+0x2c/0x60 do_interrupt_handler+0x54/0x60 el1_interrupt+0x30/0x50 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x78/0x7c arch_cpu_idle+0x18/0x2c do_idle+0xdc/0x15c cpu_startup_entry+0x28/0x60 rest_init+0xc8/0xe0 arch_call_rest_init+0x10/0x1c start_kernel+0x694/0x6d4 __primary_switched+0xa4/0xac Fixes: 1f7c51660034 ("usb: gadget: Add xilinx usb2 device support") Cc: stable@vger.kernel.org Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Piyush Mehta <piyush.mehta@amd.com> Link: https://lore.kernel.org/r/20220824071253.1261096-1-piyush.mehta@amd.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: add quirks for Lenovo OneLink+ DockJean-Francois Le Fillatre1-0/+4
[ Upstream commit 3d5f70949f1b1168fbb17d06eb5c57e984c56c58 ] The Lenovo OneLink+ Dock contains two VL812 USB3.0 controllers: 17ef:1018 upstream 17ef:1019 downstream Those two controllers both have problems with some USB3.0 devices, particularly self-powered ones. Typical error messages include: Timeout while waiting for setup device command device not accepting address X, error -62 unable to enumerate USB device By process of elimination the controllers themselves were identified as the cause of the problem. Through trial and error the issue was solved by using USB_QUIRK_RESET_RESUME for both chips. Signed-off-by: Jean-Francois Le Fillatre <jflf_kernel@gmx.com> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220824191320.17883-1-jflf_kernel@gmx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28tty: serial: atmel: Preserve previous USART mode if RS485 disabledSergiu Moga1-3/+1
[ Upstream commit 692a8ebcfc24f4a5bea0eb2967e450f584193da6 ] Whenever the atmel_rs485_config() driver method would be called, the USART mode is reset to normal mode before even checking if RS485 flag is set, thus resulting in losing the previous USART mode in the case where the checking fails. Some tools, such as `linux-serial-test`, lead to the driver calling this method when doing the setup of the serial port: after setting the port mode (Hardware Flow Control, Normal Mode, RS485 Mode, etc.), `linux-serial-test` tries to enable/disable RS485 depending on the commandline arguments that were passed. Example of how this issue could reveal itself: When doing a serial communication with Hardware Flow Control through `linux-serial-test`, the tool would lead to the driver roughly doing the following: - set the corresponding bit to 1 (ATMEL_US_USMODE_HWHS bit in the ATMEL_US_MR register) through the atmel_set_termios() to enable Hardware Flow Control - disable RS485 through the atmel_config_rs485() method Thus, when the latter is called, the mode will be reset and the previously set bit is unset, leaving USART in normal mode instead of the expected Hardware Flow Control mode. This fix ensures that this reset is only done if the checking for RS485 succeeds and that the previous mode is preserved otherwise. Fixes: e8faff7330a35 ("ARM: 6092/1: atmel_serial: support for RS485 communications") Cc: stable <stable@kernel.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: Sergiu Moga <sergiu.moga@microchip.com> Link: https://lore.kernel.org/r/20220824142902.502596-1-sergiu.moga@microchip.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28serial: atmel: remove redundant assignment in rs485_configLino Sanfilippo1-3/+1
[ Upstream commit 60efd0513916f195dd85bfbf21653f74f9ab019c ] In uart_set_rs485_config() the serial core already assigns the passed serial_rs485 struct to the uart port. So remove the assignment from the drivers rs485_config() function to avoid redundancy. Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Link: https://lore.kernel.org/r/20220410104642.32195-10-LinoSanfilippo@gmx.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 692a8ebcfc24 ("tty: serial: atmel: Preserve previous USART mode if RS485 disabled") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28mmc: core: Fix inconsistent sd3_bus_mode at UHS-I SD voltage switch failureAdrian Hunter1-26/+16
[ Upstream commit 63f1560930e4e1c4f6279b8ae715c9841fe1a6d3 ] If re-initialization results is a different signal voltage, because the voltage switch failed previously, but not this time (or vice versa), then sd3_bus_mode will be inconsistent with the card because the SD_SWITCH command is done only upon first initialization. Fix by always reading SD_SWITCH information during re-initialization, which also means it does not need to be re-read later for the 1.8V fixup workaround. Note, brief testing showed SD_SWITCH took about 1.8ms to 2ms which added about 1% to 1.5% to the re-initialization time, so it's not particularly significant. Reported-by: Seunghui Lee <sh043.lee@samsung.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Seunghui Lee <sh043.lee@samsung.com> Tested-by: Seunghui Lee <sh043.lee@samsung.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220815073321.63382-3-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: xhci-mtk: relax TT periodic bandwidth allocationIkjoon Jang1-7/+13
[ Upstream commit 548011957d1d72e0b662300c8b32b81d593b796e ] Currently xhci-mtk needs software-managed bandwidth allocation for periodic endpoints, it allocates the microframe index for the first start-split packet for each endpoint. As this index allocation logic should avoid the conflicts with other full/low-speed periodic endpoints, it uses the worst case byte budgets on high-speed bus bandwidth For example, for an isochronos IN endpoint with 192 bytes budget, it will consume the whole 4 u-frames(188 * 4) while the actual full-speed bus budget should be just 192bytes. This patch changes the low/full-speed bandwidth allocation logic to use "approximate" best case budget for lower speed bandwidth management. For the same endpoint from the above example, the approximate best case budget is now reduced to (188 * 2) bytes. Without this patch, many usb audio headsets with 3 interfaces (audio input, audio output, and HID) cannot be configured on xhci-mtk. Signed-off-by: Ikjoon Jang <ikjn@chromium.org> Link: https://lore.kernel.org/r/20210805133937.1.Ia8174b875bc926c12ce427a5a1415dea31cc35ae@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: xhci-mtk: allow multiple Start-Split in a microframeChunfeng Yun2-20/+0
[ Upstream commit d3997fce189fc4423169c51a81ba5ca01144d886 ] This patch is used to relax bandwidth schedule by allowing multiple Start-Split in the same microframe. Reviewed-and-Tested-by: Ikjoon Jang <ikjn@chromium.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/1623995165-25759-1-git-send-email-chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: xhci-mtk: add some schedule error numberChunfeng Yun1-9/+35
[ Upstream commit ccda8c224c0701caac007311d06a2de9543a7590 ] This is used to provide more information about which case causes bandwidth schedule failure. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/9771f44093053b581e9c4be4b7fb68d9fcecad08.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: xhci-mtk: add a function to (un)load bandwidth infoChunfeng Yun1-21/+16
[ Upstream commit 338af695fffb12a9407c376ce0cebce896c15050 ] Extract a function to load/unload bandwidth info, and remove a dummy check of TT offset. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/6fbc000756a4a4a7efbce651b785fee7561becb6.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: xhci-mtk: use @sch_tt to check whether need do TT scheduleChunfeng Yun1-2/+2
[ Upstream commit 4a56adf4fafbc41ceffce0c3f385f59d4fc3c16a ] It's clearer to use @sch_tt to check whether need do TT schedule, no function is changed. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/324a76782ccaf857a8f01f67aee435e8ec7d0e28.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: xhci-mtk: add only one extra CS for FS/LS INTRChunfeng Yun1-7/+3
[ Upstream commit 1bf661daf6b084bc4d753f55b54f35dc98709685 ] In USB2 Spec: "11.18.5 TT Response Generation In general, there will be two (or more) complete-split transactions scheduled for a periodic endpoint. However, for interrupt endpoints, the maximum size of the full-/low-speed transaction guarantees that it can never require more than two complete-split transactions. Two complete-split transactions are only required when the transaction spans a microframe boundary." Due to the maxp is 64, and less then 188 (at most in one microframe), seems never span boundary, so use only one CS for FS/LS interrupt transfer, this will save some bandwidth. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/5b9ff09f53d23cf9e5c5437db4ffc18b798bf60c.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: xhci-mtk: get the microframe boundary for ESITChunfeng Yun1-5/+19
[ Upstream commit 7c986fbc16ae6b2f914a3ebf06a3a4a8d9bb0b7c ] Tune the boundary for FS/LS ESIT due to CS: For ISOC out-ep, the controller starts transfer data after the first SS; for others, the data is already transferred before the last CS. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Link: https://lore.kernel.org/r/49e5a269a47984f3126a70c3fb471b0c2874b8c2.1615170625.git.chunfeng.yun@mediatek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 548011957d1d ("usb: xhci-mtk: relax TT periodic bandwidth allocation") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: dwc3: gadget: Avoid duplicate requests to enable Run/StopWesley Cheng1-3/+5
[ Upstream commit 040f2dbd2010c43f33ad27249e6dac48456f4d99 ] Relocate the pullups_connected check until after it is ensured that there are no runtime PM transitions. If another context triggered the DWC3 core's runtime resume, it may have already enabled the Run/Stop. Do not re-run the entire pullup sequence again, as it may issue a core soft reset while Run/Stop is already set. This patch depends on commit 69e131d1ac4e ("usb: dwc3: gadget: Prevent repeat pullup()") Fixes: 77adb8bdf422 ("usb: dwc3: gadget: Allow runtime suspend if UDC unbinded") Cc: stable <stable@kernel.org> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220728020647.9377-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: dwc3: gadget: Don't modify GEVNTCOUNT in pullup()Thinh Nguyen1-27/+8
[ Upstream commit 8f8034f493b5eb1ad21ff392fd30c0cf9e71f73f ] If the GEVNTCOUNT indicates events in the event buffer, the driver needs to acknowledge them before the controller can halt. Simply let the interrupt handler acknowledges the remaining event generated by the controller while polling for DSTS.DEVCTLHLT. This avoids disabling irq and taking care of race condition between the interrupt handlers and pullup(). Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/ea306ec93c41ccafbdb5d16404ff3b6eca299613.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: dwc3: gadget: Refactor pullup()Thinh Nguyen1-29/+36
[ Upstream commit 861c010a2ee1bc4a66d23f0da4aa22e75d8eaa24 ] Move soft-disconnect sequence out of dwc3_gadget_pullup(). No functional change here. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/4c0f259b17d95acaaa931f90276683a48a32fe22.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: dwc3: gadget: Prevent repeat pullup()Thinh Nguyen1-0/+4
[ Upstream commit 69e131d1ac4e52a59ec181ab4f8aa8c48cd8fb64 ] Don't do soft-disconnect if it's previously done. Likewise, don't do soft-connect if the device is currently connected and running. It would break normal operation. Currently the caller of pullup() (udc's sysfs soft_connect) only checks if it had initiated disconnect to prevent repeating soft-disconnect. It doesn't check for soft-connect. To be safe, let's keep the check here regardless whether the udc core is fixed. Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Link: https://lore.kernel.org/r/1c1345bd66c97a9d32f77d63aaadd04b7b037143.1650593829.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: dwc3: Issue core soft reset before enabling run/stopWesley Cheng3-3/+14
[ Upstream commit 0066472de157439d58454f4a55786f1045ea5681 ] It is recommended by the Synopsis databook to issue a DCTL.CSftReset when reconnecting from a device-initiated disconnect routine. This resolves issues with enumeration during fast composition switching cases, which result in an unknown device on the host. Reviewed-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Wesley Cheng <quic_wcheng@quicinc.com> Link: https://lore.kernel.org/r/20220316011358.3057-1-quic_wcheng@quicinc.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: dwc3: gadget: Avoid starting DWC3 gadget during UDC unbindWesley Cheng2-2/+4
[ Upstream commit 8217f07a50236779880f13e87f99224cd9117f83 ] There is a race present where the DWC3 runtime resume runs in parallel to the UDC unbind sequence. This will eventually lead to a possible scenario where we are enabling the run/stop bit, without a valid composition defined. Thread#1 (handling UDC unbind): usb_gadget_remove_driver() -->usb_gadget_disconnect() -->dwc3_gadget_pullup(0) --> continue UDC unbind sequence -->Thread#2 is running in parallel here Thread#2 (handing next cable connect) __dwc3_set_mode() -->pm_runtime_get_sync() -->dwc3_gadget_resume() -->dwc->gadget_driver is NOT NULL yet -->dwc3_gadget_run_stop(1) --> _dwc3gadget_start() ... Fix this by tracking the pullup disable routine, and avoiding resuming of the DWC3 gadget. Once the UDC is re-binded, that will trigger the pullup enable routine, which would handle enabling the DWC3 gadget. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wesley Cheng <wcheng@codeaurora.org> Link: https://lore.kernel.org/r/20210917021852.2037-1-wcheng@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 040f2dbd2010 ("usb: dwc3: gadget: Avoid duplicate requests to enable Run/Stop") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM deviceUtkarsh Patel1-2/+7
[ Upstream commit 1b1b672cc1d4fb3065dac79efb8901bd6244ef69 ] This adds the necessary ACPI ID for Intel Meteor Lake IOM devices. The callback function is_memory() is modified so that it also checks if the resource descriptor passed to it is a memory type "Address Space Resource Descriptor". On Intel Meteor Lake the ACPI memory resource is not described using the "32-bit Memory Range Descriptor" because the memory is outside of the 32-bit address space. The memory resource is described using the "Address Space Resource Descriptor" instead. Intel Meteor Lake is the first platform to describe the memory resource for this device with Address Space Resource Descriptor, but it most likely will not be the last. Therefore the change to the is_memory() callback function is made generic. Signed-off-by: Utkarsh Patel <utkarsh.h.patel@intel.com> Cc: stable@vger.kernel.org [ heikki: Rewrote the commit message. ] Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Link: https://lore.kernel.org/r/20220816101629.69054-2-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28usb: typec: intel_pmc_mux: Update IOM port status offset for AlderLakeAzhar Shaikh1-5/+23
[ Upstream commit ca5ce82529104e96ccc5e1888979258e233e1644 ] Intel AlderLake(ADL) IOM has a different IOM port status offset than Intel TigerLake. Add a new ACPI ID for ADL and use the IOM port status offset as per the platform. Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Azhar Shaikh <azhar.shaikh@intel.com> Link: https://lore.kernel.org/r/20210601035843.71150-1-azhar.shaikh@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 1b1b672cc1d4 ("usb: typec: intel_pmc_mux: Add new ACPI ID for Meteor Lake IOM device") Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28drm/amdgpu: make sure to init common IP before gmcAlex Deucher1-3/+11
[ Upstream commit a8671493d2074950553da3cf07d1be43185ef6c6 ] Move common IP init before GMC init so that HDP gets remapped before GMC init which uses it. This fixes the Unsupported Request error reported through AER during driver load. The error happens as a write happens to the remap offset before real remapping is done. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28drm/amdgpu: Separate vf2pf work item init from virt data exchangeVictor Skvortsov3-13/+30
[ Upstream commit 892deb48269c65376f3eeb5b4c032ff2c2979bd7 ] We want to be able to call virt data exchange conditionally after gmc sw init to reserve bad pages as early as possible. Since this is a conditional call, we will need to call it again unconditionally later in the init sequence. Refactor the data exchange function so it can be called multiple times without re-initializing the work item. v2: Cleaned up the code. Kept the original call to init_exchange_data() inside early init to initialize the work item, afterwards call exchange_data() when needed. Signed-off-by: Victor Skvortsov <victor.skvortsov@amd.com> Reviewed By: Shaoyun.liu <Shaoyun.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28drm/amdgpu: indirect register access for nv12 sriovPeng Ju Zhou2-0/+13
[ Upstream commit 8b8a162da820d48bb94261ae4684f2c839ce148c ] unify host driver and guest driver indirect access control bits names Signed-off-by: Peng Ju Zhou <PengJu.Zhou@amd.com> Reviewed-by: Emily.Deng <Emily.Deng@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-28drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vegaAlex Deucher2-25/+5
[ Upstream commit e3163bc8ffdfdb405e10530b140135b2ee487f89 ] This mirrors what we do for other asics and this way we are sure the sdma doorbell range is properly initialized. There is a comment about the way doorbells on gfx9 work that requires that they are initialized for other IPs before GFX is initialized. However, the statement says that it applies to multimedia as well, but the VCN code currently initializes doorbells after GFX and there are no known issues there. In my testing at least I don't see any problems on SDMA. This is a prerequisite for fixing the Unsupported Request error reported through AER during driver load. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216373 The error was unnoticed before and got visible because of the commit referenced below. This doesn't fix anything in the commit below, rather fixes the issue in amdgpu exposed by the commit. The reference is only to associate this commit with below one so that both go together. Fixes: 8795e182b02d ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()") Acked-by: Christian König <christian.koenig@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23Linux 5.10.145v5.10.145Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20220921153645.663680057@linuxfoundation.org Tested-by: Pavel Machek (CIP) <pavel@denx.de> Tested-by: Allen Pais <apais@linux.microsoft.com> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Salvatore Bonaccorso <carnil@debian.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-23ALSA: hda/sigmatel: Fix unused variable warning for beep power changeTakashi Iwai1-0/+2
commit 51bdc8bb82525cd70feb92279c8b7660ad7948dd upstream. The newly added stac_check_power_status() caused a compile warning when CONFIG_SND_HDA_INPUT_BEEP is disabled. Fix it. Fixes: 414d38ba8710 ("ALSA: hda/sigmatel: Keep power up while beep is enabled") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20220905130630.2845-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-23cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()Tetsuo Handa1-0/+2
commit 43626dade36fa74d3329046f4ae2d7fdefe401c6 upstream. syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does. Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1] Reported-by: syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 4f7e7236435ca0ab ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-09-23video: fbdev: pxa3xx-gcu: Fix integer overflow in pxa3xx_gcu_writeHyunwoo Kim1-1/+1
[ Upstream commit a09d2d00af53b43c6f11e6ab3cb58443c2cac8a7 ] In pxa3xx_gcu_write, a count parameter of type size_t is passed to words of type int. Then, copy_from_user() may cause a heap overflow because it is used as the third argument of copy_from_user(). Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23mksysmap: Fix the mismatch of 'L0' symbols in System.mapYouling Tang1-1/+1
[ Upstream commit c17a2538704f926ee4d167ba625e09b1040d8439 ] When System.map was generated, the kernel used mksysmap to filter the kernel symbols, we need to filter "L0" symbols in LoongArch architecture. $ cat System.map | grep L0 9000000000221540 t L0 The L0 symbol exists in System.map, but not in .tmp_System.map. When "cmp -s System.map .tmp_System.map" will show "Inconsistent kallsyms data" error message in link-vmlinux.sh script. Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23MIPS: OCTEON: irq: Fix octeon_irq_force_ciu_mapping()Alexander Sverdlin1-0/+10
[ Upstream commit ba912afbd611d3a5f22af247721a071ad1d5b9e0 ] For irq_domain_associate() to work the virq descriptor has to be pre-allocated in advance. Otherwise the following happens: WARNING: CPU: 0 PID: 0 at .../kernel/irq/irqdomain.c:527 irq_domain_associate+0x298/0x2e8 error: virq128 is not allocated Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.78-... #1 ... Call Trace: [<ffffffff801344c4>] show_stack+0x9c/0x130 [<ffffffff80769550>] dump_stack+0x90/0xd0 [<ffffffff801576d0>] __warn+0x118/0x130 [<ffffffff80157734>] warn_slowpath_fmt+0x4c/0x70 [<ffffffff801b83c0>] irq_domain_associate+0x298/0x2e8 [<ffffffff80a43bb8>] octeon_irq_init_ciu+0x4c8/0x53c [<ffffffff80a76cbc>] of_irq_init+0x1e0/0x388 [<ffffffff80a452cc>] init_IRQ+0x4c/0xf4 [<ffffffff80a3cc00>] start_kernel+0x404/0x698 Use irq_alloc_desc_at() to avoid the above problem. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23afs: Return -EAGAIN, not -EREMOTEIO, when a file already lockedDavid Howells1-0/+1
[ Upstream commit 0066f1b0e27556381402db3ff31f85d2a2265858 ] When trying to get a file lock on an AFS file, the server may return UAEAGAIN to indicate that the lock is already held. This is currently translated by the default path to -EREMOTEIO. Translate it instead to -EAGAIN so that we know we can retry it. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeffrey E Altman <jaltman@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166075761334.3533338.2591992675160918098.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23net: usb: qmi_wwan: add Quectel RM520Njerry.meng1-0/+1
[ Upstream commit e1091e226a2bab4ded1fe26efba2aee1aab06450 ] add support for Quectel RM520N which is based on Qualcomm SDX62 chip. 0x0801: DIAG + NMEA + AT + MODEM + RMNET T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0801 Rev= 5.04 S: Manufacturer=Quectel S: Product=RM520N-GL S: SerialNumber=384af524 C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: jerry.meng <jerry-meng@foxmail.com> Acked-by: Bjørn Mork <bjorn@mork.no> Link: https://lore.kernel.org/r/tencent_E50CA8A206904897C2D20DDAE90731183C05@qq.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23ALSA: hda/tegra: Align BDL entry to 4KB boundaryMohan Kumar1-1/+2
[ Upstream commit 8d44e6044a0e885acdd01813768a0b27906d64fd ] AZA HW may send a burst read/write request crossing 4K memory boundary. The 4KB boundary is not guaranteed by Tegra HDA HW. Make SW change to include the flag AZX_DCAPS_4K_BDLE_BOUNDARY to align BDLE to 4K boundary. Signed-off-by: Mohan Kumar <mkumard@nvidia.com> Link: https://lore.kernel.org/r/20220905172420.3801-1-mkumard@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23ALSA: hda/sigmatel: Keep power up while beep is enabledTakashi Iwai1-0/+22
[ Upstream commit 414d38ba871092aeac4ed097ac4ced89486646f7 ] It seems that the beep playback doesn't work well on IDT codec devices when the codec auto-pm is enabled. Keep the power on while the beep switch is enabled. Link: https://bugzilla.suse.com/show_bug.cgi?id=1200544 Link: https://lore.kernel.org/r/20220904072750.26164-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-09-23wifi: mac80211_hwsim: check length for virtio packetsSoenke Huster1-1/+6
[ Upstream commit 8c0427842aaef161a38ac83b7e8d8fe050b4be04 ] An invalid packet with a length shorter than the specified length in the netlink header can lead to use-after-frees and slab-out-of-bounds in the processing of the netlink attributes, such as the following: BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010 Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12 Workqueue: events hwsim_virtio_rx_work Call Trace: <TASK> dump_stack_lvl+0x45/0x5d print_report.cold+0x5e/0x5e5 kasan_report+0xb1/0x1c0 __nla_validate_parse+0x1258/0x2010 __nla_parse+0x22/0x30 hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0 hwsim_virtio_rx_work+0x1b2/0x370 process_one_work+0x8df/0x1530 worker_thread+0x575/0x11a0 kthread+0x29d/0x340 ret_from_fork+0x22/0x30 </TASK> Discarding packets with an invalid length solves this. Therefore, skb->len must be set at reception. Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>