summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-04-30USB: EHCI: make all debugging depend on CONFIG_DYNAMIC_DEBUGAlan Stern1-52/+34
The debugging facilities in ehci-dbg.c follow an uneven pattern. Some of them are protected by "#ifdef CONFIG_DYNAMIC_DEBUG" and some aren't, presumably in the hope of having some of the debugging output available in any configuration. This leads to build problems when dynamic debugging isn't configured. Rather than try to keep this complicated state of affairs, let's just make everything dependent on CONFIG_DYNAMIC_DEBUG. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30usb: usbip: Avoid NULL pointer dereference in case of errorKrzysztof Opasiak1-1/+1
One line above we have checked that udc is NULL so we shouldn't dereference it while printing error message. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30usbip: vudc: make dev_desc attribute binaryIgor Kotrasinski1-6/+14
We read a struct usb_device_descriptor from it, so make it an actual binary attribute. Signed-off-by: Igor Kotrasinski <i.kotrasinsk@gmail.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Tested-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-30usb: Add driver for UCSIHeikki Krogerus4-0/+720
USB Type-C Connector System Software Interface (UCSI) is specification that defines the registers and data structures that can be used to control USB Type-C ports on a system. UCSI is used on several Intel Broxton SoC based platforms. Things that UCSI can be used to control include at least USB Data Role swapping, Power Role swapping and controlling of Alternate Modes on top of providing general details about the port and the partners that are attached to it. The initial purpose of the UCSI driver is to make sure USB is in host mode on desktop and server systems that are USB dual role capable, and provide UCSI interface. The goal is to integrate the driver later to an USB Type-C framework for Linux kernel, and at the same time add support for more extensive USB Type-C port control that UCSI offers, for example data role swapping, power role swapping, Alternate Mode control etc. The UCSI specification is public can be obtained from here: http://www.intel.com/content/www/us/en/io/universal-serial-bus/usb-type-c-ucsi-spec.html Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: core: move root hub's device node assignment after it is added to busPeter Chen2-1/+1
When the root hub device is added to the bus, it tries to get pins information from pinctrl (see pinctrl_bind_pins, at really_probe), if the pin information is described at DT, it will show below error since the root hub's device node is the same with controller's, but controller's pin has already been requested when it is added to platform bus. imx6q-pinctrl 20e0000.iomuxc: pin MX6Q_PAD_GPIO_1 already requested by 2184000.usb; cannot claim for usb1 imx6q-pinctrl 20e0000.iomuxc: pin-137 (usb1) status -22 imx6q-pinctrl 20e0000.iomuxc: could not request pin 137 (MX6Q_PAD_GPIO_1) from group usbotggrp-3 on device 20e0000.iomuxc usb usb1: Error applying setting, reverse things back To fix this issue, we move the root hub's device node assignment (equals to contrller's) after device is added to bus, we only need to know root hub's device node information after the device under root hub is created, so this movement will not affect current function. Signed-off-by: Peter Chen <peter.chen@nxp.com> Reported-by: Lars Steubesand <lars.steubesand@philips.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28Use "foo *bar" instead of "foo * bar".Sandhya Bankar1-1/+1
Use "foo *bar" instead of "foo * bar". Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: Remove unnecessary space before function pointer arguments.Sandhya Bankar1-4/+4
Remove unnecessary space before function pointer arguments. Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: core: hub: hub_port_init lock controller instead of busChris Bainbridge4-8/+19
The XHCI controller presents two USB buses to the system - one for USB2 and one for USB3. The hub init code (hub_port_init) is reentrant but only locks one bus per thread, leading to a race condition failure when two threads attempt to simultaneously initialise a USB2 and USB3 device: [ 8.034843] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command [ 13.183701] usb 3-3: device descriptor read/all, error -110 On a test system this failure occurred on 6% of all boots. The call traces at the point of failure are: Call Trace: [<ffffffff81b9bab7>] schedule+0x37/0x90 [<ffffffff817da7cd>] usb_kill_urb+0x8d/0xd0 [<ffffffff8111e5e0>] ? wake_up_atomic_t+0x30/0x30 [<ffffffff817dafbe>] usb_start_wait_urb+0xbe/0x150 [<ffffffff817db10c>] usb_control_msg+0xbc/0xf0 [<ffffffff817d07de>] hub_port_init+0x51e/0xb70 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Call Trace: [<ffffffff817fd36d>] xhci_setup_device+0x53d/0xa40 [<ffffffff817fd87e>] xhci_address_device+0xe/0x10 [<ffffffff817d047f>] hub_port_init+0x1bf/0xb70 [<ffffffff811247ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff817d4697>] hub_event+0x817/0x1570 [<ffffffff810f3e6f>] process_one_work+0x1ff/0x620 [<ffffffff810f3dcf>] ? process_one_work+0x15f/0x620 [<ffffffff810f4684>] worker_thread+0x64/0x4b0 [<ffffffff810f4620>] ? rescuer_thread+0x390/0x390 [<ffffffff810fa7f5>] kthread+0x105/0x120 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 [<ffffffff81ba183f>] ret_from_fork+0x3f/0x70 [<ffffffff810fa6f0>] ? kthread_create_on_node+0x200/0x200 Which results from the two call chains: hub_port_init usb_get_device_descriptor usb_get_descriptor usb_control_msg usb_internal_control_msg usb_start_wait_urb usb_submit_urb / wait_for_completion_timeout / usb_kill_urb hub_port_init hub_set_address xhci_address_device xhci_setup_device Mathias Nyman explains the current behaviour violates the XHCI spec: hub_port_reset() will end up moving the corresponding xhci device slot to default state. As hub_port_reset() is called several times in hub_port_init() it sounds reasonable that we could end up with two threads having their xhci device slots in default state at the same time, which according to xhci 4.5.3 specs still is a big no no: "Note: Software shall not transition more than one Device Slot to the Default State at a time" So both threads fail at their next task after this. One fails to read the descriptor, and the other fails addressing the device. Fix this in hub_port_init by locking the USB controller (instead of an individual bus) to prevent simultaneous initialisation of both buses. Fixes: 638139eb95d2 ("usb: hub: allow to process more usb hub events in parallel") Link: https://lkml.org/lkml/2016/2/8/312 Link: https://lkml.org/lkml/2016/2/4/748 Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb/host/: const data must use __initconst not __initdataNicolas Pitre4-4/+4
Init data marked const should be annotated with __initconst for correctness and not __initdata. This also fixes LTO builds that otherwise fail with section mismatch errors. Signed-off-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: devio: declare usbdev_vm_ops as staticMichele Curti1-1/+1
usbdev_vm_ops is used in devio.c only, so declare it as static Signed-off-by: Michele Curti <michele.curti@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: misc: usbtest: fix error of urb allocationChunfeng Yun1-0/+3
urb allocation will fail when usbtest_alloc_urb() tries to allocate zero length buffer, but it doesn't need it in fact, so just skips buffer allocation in the case. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: core: buffer: avoid NULL pointer dereferrenceChunfeng Yun1-0/+3
NULL pointer dereferrence will happen when class driver wants to allocate zero length buffer and pool_max[0] can't be used, so simply returns NULL in the case. Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usbip: vudc: fix Kconfig dependenciesArnd Bergmann1-4/+4
With the addition of VUDC, the USBIP stack can now be used on configurations without USB host support, but trying to build it with USB gadget support disabled fails with drivers/usb/built-in.o: In function `vep_dequeue': vudc_main.c:(.text+0xa6ddc): undefined reference to `usb_gadget_giveback_request' drivers/usb/built-in.o: In function `nuke': vudc_main.c:(.text+0xa6ea8): undefined reference to `usb_gadget_giveback_request' drivers/usb/built-in.o: In function `vudc_device_reset': vudc_main.c:(.text+0xa720c): undefined reference to `usb_gadget_udc_reset' drivers/usb/built-in.o: In function `vudc_probe': This addresses both issues, by changing the dependency for USBIP_CORE to USB_COMMON, and adding additional dependencies on USB or USB_GADGET for the individual portions as needed. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 9360575c5837 ("usbip: vudc: Add vudc to Kconfig") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usbip: safe completion against unbind operationNobuo Iwata1-1/+4
This patch adds a code fragment to ignore completing URBs in closing connection. Regarding this patch, 2 execution contexts are related. 1) stub_tx.c: stub_complete() which is called from USB core 1-1) add to unlink list and free URB or 1-2) move to tx list 2) stub_dev.c: stub_shutdown_connection() which is invoked by unbind operation through sysfs. 2-1) stop TX/RX threads 2-2) close TCP connection and set ud.tcp_socket to NULL 2-3) cleanup pending URBs by stub_device_cleanup_urbs(sdev) 2-4) free unlink list (no lock) In the race condition, URBs which will be cleared in 2-3) may be handled in 1). In case 1-1), it will not be transferred bcause tx threads are stooped in 2-1). In case 1-2), may be freed in 2-4). With this patch, after 2-2), completing URBs in 1) will not be handled and cleared in 2-3). The kernel log with this patch is as below. kernel: usbip_core: usbip_kernel_unlink:792: shutting down tcp_socket ef61d980 kernel: usbip-host 1-3: free sdev f5df6180 kernel: usbip-host 1-3: free urb f5df6700 kernel: usbip-host 1-3: Enter kernel: usbip_core: usbip_stop_eh:132: usbip_eh waiting completion 5 kernel: usbip_host: stub_complete:71: complete! status 0 kernel: usbip_host: stub_complete:102: ignore urb for closed connection e725fc00 (*) kernel: usbip_host: stub_complete:71: complete! status -2 kernel: usbip-host 1-3: stopped by a call to usb_kill_urb() because of cleaning up a virtual connection kernel: usbip-host 1-3: free urb e725fc00 (**) kernel: usbip-host 1-3: free urb e725e000 kernel: usbip_host: stub_complete:71: complete! status -2 kernel: usbip-host 1-3: stopped by a call to usb_kill_urb() because of cleaning up a virtual connection kernel: usbip-host 1-3: free urb e725f800 kernel: usbip_host: stub_complete:71: complete! status -2 kernel: usbip-host 1-3: stopped by a call to usb_kill_urb() because of cleaning up a virtual connection kernel: usbip-host 1-3: free urb e725e800 kernel: usbip_host: stub_complete:71: complete! status -2 kernel: usbip-host 1-3: stopped by a call to usb_kill_urb() because of cleaning up a virtual connection kernel: usbip-host 1-3: device reset kernel: usbip-host 1-3: lock for reset kernel: usbip_host: store_match_busid:178: del busid 1-3 kernel: uvcvideo: Found UVC 1.00 device Venus USB2.0 Camera (056e:700a) kernel: input: Venus USB2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-3/1-3:1.0/input/input22 (*) skipped with this patch in completion (**) released in 2-3 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: usbip: vudc: Rename find_endpoint() to vudc_find_endpoint()Krzysztof Opasiak4-6/+6
As find_endpoint() is a global funcion rename it to vudc_find_endpoint() to clearly mark where does it come from. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usbip: fix NULL pointer dereference on errorsAlexander Popov4-18/+12
Fix NULL pointer dereference and obsolete comments forgotten when usbip server was converted from an interface driver to a device driver. Signed-off-by: Alexander Popov <alpopov@ptsecurity.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28usb: usbip: vudc: Fix WARN_ON() usage patternKrzysztof Opasiak1-3/+2
Fix WARN_ON() macro usage as suggested by Felipe. Instead of using: if (cond) { WARN_ON(1); do_stuff(); } Use a better pattern with WARN_ON() placed in if condition: if (WARN_ON(cond)) do_stuff(); Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28Documentation: ABI: Add doc for usbip-vudc attributesKrzysztof Opasiak1-0/+35
As vudc provides some new attributes using sysfs infrastructure, add a suitable documentation file for those attributes. Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-28Merge tag 'usb-for-v4.7' of ↵Greg Kroah-Hartman39-616/+827
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: changes for v4.7 merge window Here's the big USB Gadget pull request. This time not as large as usual with only 57 non-merge commits. The most important part here is, again, all the work on dwc3. This time around we're treating all endpoints (except for control endpoint) exactly the same. They all have the same amount of TRBs on the ring, they all treat the ring as an actual ring with a link TRB pointing to the head, etc. We're also helping the host side burst (on SuperSpeed GEN1 or GEN2 at least) for as long as possible until the endpoint returns NRDY. Other than this big TRB ring rework on dwc3, we also have a dwc3-omap DMA initialization fix, some extra debugfs files to aid in some odd debug sessions and a complete removal of our FIFO resizing logic. We have a new quirk for some dwc3 P3 quirk in some implementations. The rest is basically non-critical fixes and the usual cleanups.
2016-04-28usb: dwc3: gadget: disable automatic calculation of ACK TP NUMPFelipe Balbi2-0/+16
Now that we calculate DCFG.NUMP, we can disable dwc3's automatic calculation so we maximize our chances of very high throughtput through the use of bursts. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc3: gadget: update DCFG.NumP to max burst sizeFelipe Balbi2-2/+15
NumP field of DCFG register is used on NumP field of ACK TP header and it tells the host how many packets an endpoint can receive before waiting for synchronization. Documentation says it should be set to anything <=bMaxBurst. Interestingly, however, this setting is not per-endpoint how it should be (different endpoints could have different burst sizes), but things seem to work okay right now. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc2: Proper cleanup on dr_mode failureJohn Youn1-1/+1
Cleanup in probe if we fail to get dr_mode. Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc2: Fixed SOF interrupt enabling/disablingSevak Arakelyan1-1/+2
In case of DDMA mode we don't need to get an SOF interrupt so disable the unmasking of SOF interrupt in DDMA mode. Signed-off-by: Sevak Arakelyan <sevaka@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc2: host: Setting qtd to NULL after freeing itVardan Mikayelyan2-0/+2
This is safety change added while doing slub debugging. Affected functions: dwc2_hcd_qtd_unlink_and_free() _dwc2_hcd_urb_enqueue() Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc2: gadget: Prevent handling of host interruptsVardan Mikayelyan1-0/+3
In host slave mode, the core asserts the rxready, txfifoempty interrupts that get serviced in the gadget irq handler. Prevent servicing of these when not in the gadget mode of operation. Signed-off-by: Vardan Mikayelyan <mvardan@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc2: gadget: Check for ep0 in enableVahram Aharonyan1-1/+4
Replaced the WARN_ON with a check and return of -EINVAL in the dwc2_hsotg_ep_enable function if ep0 is passed in. Signed-off-by: Vahram Aharonyan <vahrama@synopsys.com> Signed-off-by: John Youn <johnyoun@synopsys.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc3: gadget: give better command return codeKonrad Leszczynski2-3/+34
if Start Transfer command fails, let's try a little harder to figure out why the command failed and give slightly better return codes. This will be usefulf or isochronous endpoints, at least, which could decide to retry a given request. Signed-off-by: Konrad Leszczynski <konrad.leszczynski@intel.com> Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: gadget: composite: avoid kernel oops with bad gadgetsFelipe Balbi1-3/+19
If a gadget driver loaded to a Superspeed-capable peripheral controller, using a Superspeed cable, doesn't provide Superspeed descriptors, we will get a NULL pointer dereference. In order to avoid that situation, we will try to find any valid descriptors we can. If no set of descriptors is passed in, then we'll let that gadget oops anyhow. Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc3: pci: pass the platform device as a parameter to dwc3_pci_quirks()Heikki Krogerus1-8/+5
For convenience, passing the dwc3 platform device as a parameter to dwc3_pci_quirks() function. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc3: pci: make build-in device properties availableHeikki Krogerus1-3/+4
Setting the ACPI companion before calling dwc3_pci_quirks. The ACPI companion will be set unconditionally as the primary fwnode, overriding any previously set primary fwnode. This will make sure that any build-in properties added to the platform device will be added as the secondary fwnode in cases where also ACPI companion exists. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-28usb: dwc3: ep0: sanity check test mode selectorFei Yang1-2/+12
In case host sends us an unsupported test mode, we *must* stall this request. This will tell the host that the selector is invalid and we won't put the controller in unsupported test modes which could have undetermined side-effects. Signed-off-by: Fei Yang <fei.yang@intel.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2016-04-27usb: hcd: do not call whc_clean_up on wch_init call failureColin Ian King1-3/+4
whc_init already calls whc_clean_up if an error occurs during the initialization, so calling it again if whc_init fails at the end of wch_probe will cause double free errors. Fix this by bailing out on an whc_init failure to a new label that avoids doing the duplicated whc_clean_up. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27USB: bcma: use simpler devm helper for getting vcc GPIORafał Miłecki1-4/+2
Thanks to switching to devm_gpiod_get: 1) We don't have to pass fwnode pointer 2) We can request initial GPIO value at getting call This was successfully tested on Netgear R6250 (BCM4708). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: host: xhci: plat: finally get rid of xhci_plat_type_is()Felipe Balbi2-21/+0
Now that there are no more users for xhci_plat_type_is(), we can safely remove it. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: host: xhci: plat: make use of new methods in xhci_plat_privFelipe Balbi1-28/+27
Now that the code has been refactored enough, switching over to using ->plat_start() and ->init_quirk() becomes a very simple patch. After this patch, there are no further uses for xhci_plat_type_is() which will be removed in a follow-up patch. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: host: xhci: plat: change type of mvebu init_quirk()Felipe Balbi3-7/+12
Just like RCAR's init_quirk() we want mvebu's to use struct usb_hcd * as argument too. This is another step towards removing xhci_plat_type_is(). Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: host: xhci: plat: move mvebu init_quirk() to xhci_plat_setup()Felipe Balbi1-6/+9
xhci_plat_setup() is the rightful place for xhci_mvebu_mbus_init_quirk(), so let's move it there in order to make it simpler to get rid of xhci_plat_type_is() later on. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: xhci: plat: add ->plat_start() and ->init_quirk() methodsFelipe Balbi1-0/+2
these two methods will be used to hide platform-specific details so we can get rid of xhci_plat_type_is() in a later patch. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: host: xhci: rcar: retire use of xhci_plat_type_is()Felipe Balbi1-1/+33
We're preparing to remove xhci_plat_type_is() in favor of a better approach where we define function pointers ahead of time. This will let us make assumptions about which platforms we're running on and which platform-specific functions we should call. Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com> [delete extra comma in function parameters -Mathias] Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: xhci: remove duplicate code of interval checkingAlexandr Ivanov1-32/+21
Move duplicate code from xhci_queue_intr_tx() and xhci_queue_isoc_tx_prepare() to the check_interval() function. Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: xhci: remove duplicate function xhci_urb_to_transfer_ringAlexandr Ivanov3-53/+16
Remove duplicate function xhci_urb_to_transfer_ring from xhci.c. We have same function in xhci-ring.c. Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usb: xhci: merge xhci_queue_bulk_tx and queue_bulk_sg_tx functionsAlexandr Ivanov2-288/+121
In drivers/usb/host/xhci-ring.c there are two functions (xhci_queue_bulk_tx and queue_bulk_sg_tx) that are very similar, so a lot of code duplication. This patch merges these functions into to one xhci_queue_bulk_tx. Also counting the needed TRBs is merged and refactored. Signed-off-by: Alexandr Ivanov <alexandr.sky@gmail.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27drivers: usb: core: Minimize irq disabling in usb_sg_cancel()David Mosberger1-20/+17
Restructure usb_sg_cancel() so we don't have to disable interrupts while cancelling the URBs. Suggested-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27drivers: usb: core: Don't disable irqs in usb_sg_wait() during URB submit.David Mosberger1-8/+7
usb_submit_urb() may take quite long to execute. For example, a single sg list may have 30 or more entries, possibly leading to that many calls to DMA-map pages. This can cause interrupt latency of several hundred micro-seconds. Avoid the problem by releasing the io->lock spinlock and re-enabling interrupts before calling usb_submit_urb(). This opens races with usb_sg_cancel() and sg_complete(). Handle those races by using usb_block_urb() to stop URBs from being submitted after usb_sg_cancel() or sg_complete() with error. Note that usb_unlink_urb() is guaranteed to return -ENODEV if !io->urbs[i]->dev and since the -ENODEV case is already handled, we don't have to check for !io->urbs[i]->dev explicitly. Before this change, reading 512MB from an ext3 filesystem on a USB memory stick showed a throughput of 12 MB/s with about 500 missed deadlines. With this change, reading the same file gave the same throughput but only one or two missed deadlines. Signed-off-by: David Mosberger <davidm@egauge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usbip: vudc: Add vudc to KconfigIgor Kotrasinski2-0/+14
Add the driver to Kconfig to make it visible in menuconfig and allow people to compile it. This commit is a result of cooperation between Samsung R&D Institute Poland and Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usbip: tools: Start using VUDC backend in usbip toolsIgor Kotrasinski3-6/+112
Modify userspace tools to allow exporting and connecting to vudc. This commit is a result of cooperation between Samsung R&D Institute Poland and Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Ewelina Kosmider <3w3lfin@gmail.com> [Various bug fixes and improvements] Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usbip: tools: Add vudc backend to usbip toolsKrzysztof Opasiak4-0/+201
Adds an equivalent of usbip_host_driver for the vudc. Most of the code is already shared, but this adds some vudc specific code for getting information about devices. Based on code created in cooperation with Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usbip: tools: Extract generic code to be shared with vudc backendKrzysztof Opasiak6-278/+428
Extract the code from current stub driver backend and a common interface for both stub driver and vudc. This allows to share most of the usbipd code for both of them. Based on code created in cooperation with Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usbip: vudc: Add SysFS infrastructure for VUDCIgor Kotrasinski1-0/+221
Add sysfs attributes to allow controlling vudc from usbip tools. dev_desc - device descriptor of current gadget. This is required to be consisten with current usbip protocol and allow to list exportable devices on given machine. usbip_sockfd - allows to pass socket to kernel to start usbip transfer. usbip_status - currnent status of device This commit is a result of cooperation between Samsung R&D Institute Poland and Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Karol Kosik <karo9@interia.eu> [Various bug fixes, improvements and commit msg update] Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-27usbip: vudc: Add UDC specific opsIgor Kotrasinski1-0/+662
Add endpoints definitions and ops for both endpoints and gadget. Add also a suitable platform driver and functions for handling usbip events. This commit is a result of cooperation between Samsung R&D Institute Poland and Open Operating Systems Student Society at University of Warsaw (O2S3@UW) consisting of: Igor Kotrasinski <ikotrasinsk@gmail.com> Karol Kosik <karo9@interia.eu> Ewelina Kosmider <3w3lfin@gmail.com> Dawid Lazarczyk <lazarczyk.dawid@gmail.com> Piotr Szulc <ps347277@students.mimuw.edu.pl> Tutor and project owner: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Igor Kotrasinski <i.kotrasinsk@samsung.com> Signed-off-by: Karol Kosik <karo9@interia.eu> [Various bug fixes, improvements and commit msg update] Signed-off-by: Krzysztof Opasiak <k.opasiak@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-11 23:47:43 +0300