summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-01-05gpio: bt8xx: use gpiochip data pointerLinus Walleij1-5/+5
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Michael Buesch <m@bues.ch> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: bcm-kona: use gpiochip data pointerLinus Walleij1-15/+10
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Markus Mayer <markus.mayer@linaro.org> Cc: Tim Kryger <tim.kryger@linaro.org> Cc: Matt Porter <matt.porter@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: ath79: use gpiochip data pointerLinus Walleij1-9/+7
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: Alban Bedel <albeu@free.fr> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: arizona: use gpiochip data pointerLinus Walleij1-10/+5
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Cc: Mark Brown <broonie@kernel.org> Reviewed-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: amdpt: use gpiochip data pointerLinus Walleij1-9/+7
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: YD Tseng <ltyu101@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: amd8111: use gpiochip data pointerLinus Walleij1-9/+7
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: altera: use gpiochip data pointerLinus Walleij1-14/+9
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Tien Hock Loh <thloh@altera.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: adp5588: use gpiochip data pointerLinus Walleij1-11/+7
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Jean-Francois Dagenais <jeff.dagenais@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: adp5520: use gpiochip data pointerLinus Walleij1-5/+5
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: adnp: use gpiochip data pointerLinus Walleij1-16/+11
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: 74x164: use gpiochip data pointerLinus Walleij1-8/+3
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: 104-idio-16: use gpiochip data pointerLinus Walleij1-10/+5
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: 104-idi-48: use gpiochip data pointerLinus Walleij1-9/+4
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: generic: factor into gpio_chip structLinus Walleij22-552/+442
The separate struct bgpio_chip has been a pain to handle, both by being confusingly similar in name to struct gpio_chip and for being contained inside a struct so that struct gpio_chip is contained in a struct contained in a struct, making several steps of dereferencing necessary. Make things simpler: include the fields directly into <linux/gpio/driver.h>, #ifdef:ed for CONFIG_GENERIC_GPIO, and get rid of the <linux/basic_mmio_gpio.h> altogether. Prefix some of the member variables with bgpio_* and add proper kerneldoc while we're at it. Modify all users to handle the change and use a struct gpio_chip directly. And while we're at it: replace all container_of() dereferencing by gpiochip_get_data() and registering the gpio_chip with gpiochip_add_data(). Cc: arm@kernel.org Cc: Alexander Shiyan <shc_work@mail.ru> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de> Cc: Kukjin Kim <kgene@kernel.org> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Nicolas Pitre <nicolas.pitre@linaro.org> Cc: Olof Johansson <olof@lixom.net> Cc: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Cc: Rabin Vincent <rabin@rab.in> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org Cc: bcm-kernel-feedback-list@broadcom.com Acked-by: Gregory Fong <gregory.0xf0@gmail.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Tony Lindgren <tony@atomide.com> Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: of: provide optional of_mm_gpiochip_add_data() functionLinus Walleij2-7/+15
In the same spirit as we add an optional void *data argument to the gpiochip_add_data() call, we need this also for of_mm_gpiochip_add(). Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: add a data pointer to gpio_chipLinus Walleij2-5/+19
This adds a void * pointer to gpio_chip so that driver can assign and retrieve some states. This is done to get rid of container_of() calls for gpio_chips embedded inside state containers, so we can remove the need to have the gpio_chip or later (planned) struct gpio_device be dynamically allocated at registration time, so that its struct device can be properly reference counted and not bound to its parent device (e.g. a platform_device) but instead live on after unregistration if it is opened by e.g. a char device or sysfs. The data is added with the new function gpiochip_add_data() and for compatibility we add static inline wrapper function gpiochip_add() that will call gpiochip_add_data() with NULL as argument. The latter will be removed once we have exorcised gpiochip_add() from the kernel. gpiochip_get_data() is added as a static inline accessor for drivers to quickly get their data out. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: pxa: checking IS_ERR() instead of NULLDan Carpenter1-2/+2
irq_domain_add_legacy() returns NULL on error, it doesn't return error pointers. Fixes: 384ca3c6a28d ('gpio: pxa: change the interrupt management') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: generic: fix signedness bug found by cppcheckLinus Walleij1-2/+3
cppcheck reports this: (style) int result is returned as long value. If the return value is long to avoid loss of information, then you have loss of information. This can be fixed with (1UL << pin) but that is the same as using <linux/bitops.h> that already use 1UL so take this approach. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05fbdev: via-gpio: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05pinctrl: qcom: fix up errorpathLinus Walleij2-4/+4
This fixes up: commit 464231fb1fb1360399a2eb11479c47e39facb030 "pinctrl: ssbi-gpio: Be sure to clamp return value" commit b9164f049339006fafe8a52396e0f1997552214a "gpio: ssbi-mpp: Be sure to clamp return value" as I managed to screw up some of the logic when clamping the return values. Cc: Björn Andersson <bjorn@kryo.se> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-04gpiolib: always initialize *flags from of_get_named_gpio_flagsArnd Bergmann1-0/+3
The of_get_named_gpio_flags() function does nothing other than returning an error when CONFIG_OF_GPIO is disabled, but that causes spurious warnings about possible use of uninitialized variables in any code that does not check the of_get_named_gpio_flags() return value before trying to use the flags: drivers/input/misc/rotary_encoder.c: In function 'rotary_encoder_probe': drivers/input/misc/rotary_encoder.c:223:28: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/power/bq24735-charger.c: In function 'bq24735_charger_probe': drivers/power/bq24735-charger.c:227:12: warning: 'flags' may be used uninitialized in this function [-Wmaybe-uninitialized] drivers/power/sbs-battery.c: In function 'sbs_probe': drivers/power/sbs-battery.c:782:17: warning: 'gpio_flags' may be used uninitialized in this function [-Wmaybe-uninitialized] This changes the behavior of the inline helper to set the flags to zero when OF_GPIO is disabled, to avoid the warnings. In all cases I've encountered, we don't actually get to the place that uses the flags if CONFIG_OF is disabled because we won't enter the DT parser code. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-28gpio: fix warning about iteratorSudip Mukherjee1-8/+12
We were getting build warning about "iterator" being used uninitialized. Use iterator properly to fix the build warning and in the process remove the variable "pos" which is not required now. Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: update gpiochip .get() callback descriptionVladimir Zapolskiy1-2/+1
Since gpiochip .get() callback may return a negative error value, it strictly limits the range of possible non-error returned values to a subset of [30:0] bitmask, however on practice on success all gpiochip drivers return either 0 for low signal or 1 for high signal, this is assured by "gpio: *: Be sure to clamp return value" series of changes. To avoid any confusion, misinterpretation and potential errors while developing gpiochip drivers in future convert this implicit assumption to a mandatory rule. For output signals with unknown output signal state gpiochip drivers should return a negative error instead of 0. Signed-off-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27Revert "gpio: revert get() to non-errorprogating behaviour"Linus Walleij1-7/+1
This reverts commit 45ad7db90b42555c8107f18ec6d6a1e9bce34860. We have fixed all the drivers that were returning ambious values not clamped to [0,1] or an error code, so return the error propagating behaviour of the API. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: sunxi: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: ssbi-mpp: Be sure to clamp return valueLinus Walleij1-3/+3
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. This code was also double-inverting a bool which makes no sense so I removed that code and moved clamping toward the end. Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: ssbi-gpio: Be sure to clamp return valueLinus Walleij1-2/+2
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Also, this code was double-inverting a bool. That makes no sense whatsoever, so I removed the double-invert. Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: spmi-mpp: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: spmi-gpio: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Ivan T. Ivanov <ivan.ivanov@linaro.org> Cc: Björn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: xway: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Pramod Gurav <pramod.gurav@smartplayin.com> Cc: John Crispin <blogic@openwrt.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: coh901: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27pinctrl: baytrail: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: viperboard: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Lars Poeschel <poeschel@lemonage.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: ucb1400: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: tz1090-pdc: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: tz1090: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: twl4030: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. This also makes the driver start to return the error code, as the end of the series make this work. Cc: Roger Quadros <rogerq@ti.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: tc3589x: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: sx150x: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. This also starts to propagate the error code from the I2C transaction as the end of the series adds support for that. Cc: Wei Chen <Wei.Chen@csr.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: sta2x11: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Alessandro Rubini <rubini@gnudd.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: sa1100: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: pch: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Thierry Reding <treding@nvidia.com> Cc: Daniel Krueger <daniel.krueger@systec-electronic.com> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: pcf857x: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Also start returning the error code if something fails, as the end of the series augment the core to support this. Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: George Cherian <george.cherian@ti.com> Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: msic: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: mpc8xxx: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: ml-ioh: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Feng Tang <feng.tang@intel.com> Cc: Tomoya MORINAGA <tomoya-linux@dsn.okisemi.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: max732x: Be sure to clamp return valueLinus Walleij1-2/+2
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Also start to propagate the error code here as the end of the series fixes this to work for all drivers. Cc: Semen Protsenko <semen.protsenko@globallogic.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by:Nicholas Krause <xerofoify@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: lpc32xx: Be sure to clamp return valueLinus Walleij1-4/+4
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Roland Stigge <stigge@antcom.de> Cc: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: kempld: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Brunner Michael <Michael.Brunner@kontron.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-27gpio: janz-ttl: Be sure to clamp return valueLinus Walleij1-1/+1
As we want gpio_chip .get() calls to be able to return negative error codes and propagate to drivers, we need to go over all drivers and make sure their return values are clamped to [0,1]. We do this by using the ret = !!(val) design pattern. Cc: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 22:54:29 +0300