summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-05-11scsi_debug: uuid for lu nameDouglas Gilbert1-10/+51
Permit changing of a LU name from a (fake) IEEE registered NAA (5) to a locally assigned UUID. Using a UUID (RFC 4122) for a SCSI designation descriptor (e.g. a LU name) was added in spc5r08.pdf (a draft INCITS standard) on 25 January 2016. Add parameter uuid_ctl to use a separate UUID for each LU (storage device) name. Additional option for all LU names to have the same UUID (since their storage is shared). Previous action of using NAA identifier for LU name remains the default. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11scsi_debug: vpd and mode page workDouglas Gilbert1-79/+108
Cleanup some mode and vpd pages. Stop reporting SBC (disk) pages when peripheral type is something else (e.g. tape). Update version descriptors. Expand LBPRZ flag handling. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-11scsi_debug: add multiple queue supportDouglas Gilbert1-256/+446
Add submit_queue parameter (minimum and default: 1; maximum: nr_cpu_ids) that controls how many queues are built, each with their own lock and in_use bit vector. Add statistics parameter which is default off. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-10bfa: fix bfa_fcb_itnim_alloc() error handlingDan Carpenter3-6/+8
The caller assumes that "itnim" is NULL on error and non-NULL on success but really "itnim" is uninitialized on error. This function should just use normal error handling where it returns zero on success and negative on failure. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Anil Gurumurthy <anil.gurumurthy@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-06megaraid_sas: Downgrade two success messages to infoAndy Lutomirski2-2/+2
I actually read the error messages in my logs, and successful initialization is not an error. Arguably these log lines could be deleted entirely. Signed-off-by: Andy Lutomirski <luto@kernel.org> Reviewed-by: Hannes Reinicke <hare@suse.de> Acked-by: Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-06cxlflash: Fix to resolve dead-lock during EEH recoveryManoj N. Kumar1-0/+15
When a cxlflash adapter goes into EEH recovery and multiple processes (each having established its own context) are active, the EEH recovery can hang if the processes attempt to recover in parallel. The symptom logged after a couple of minutes is: INFO: task eehd:48 blocked for more than 120 seconds. Not tainted 4.5.0-491-26f710d+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. eehd 0 48 2 Call Trace: __switch_to+0x2f0/0x410 __schedule+0x300/0x980 schedule+0x48/0xc0 rwsem_down_write_failed+0x294/0x410 down_write+0x88/0xb0 cxlflash_pci_error_detected+0x100/0x1c0 [cxlflash] cxl_vphb_error_detected+0x88/0x110 [cxl] cxl_pci_error_detected+0xb0/0x1d0 [cxl] eeh_report_error+0xbc/0x130 eeh_pe_dev_traverse+0x94/0x160 eeh_handle_normal_event+0x17c/0x450 eeh_handle_event+0x184/0x370 eeh_event_handler+0x1c8/0x1d0 kthread+0x110/0x130 ret_from_kernel_thread+0x5c/0xa4 INFO: task blockio:33215 blocked for more than 120 seconds. Not tainted 4.5.0-491-26f710d+ #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. blockio 0 33215 33213 Call Trace: 0x1 (unreliable) __switch_to+0x2f0/0x410 __schedule+0x300/0x980 schedule+0x48/0xc0 rwsem_down_read_failed+0x124/0x1d0 down_read+0x68/0x80 cxlflash_ioctl+0x70/0x6f0 [cxlflash] scsi_ioctl+0x3b0/0x4c0 sg_ioctl+0x960/0x1010 do_vfs_ioctl+0xd8/0x8c0 SyS_ioctl+0xd4/0xf0 system_call+0x38/0xb4 INFO: task eehd:48 blocked for more than 120 seconds. The hang is because of a 3 way dead-lock: Process A holds the recovery mutex, and waits for eehd to complete. Process B holds the semaphore and waits for the recovery mutex. eehd waits for semaphore. The fix is to have Process B above release the semaphore before attempting to acquire the recovery mutex. This will allow eehd to proceed to completion. Signed-off-by: Manoj N. Kumar <manoj@linux.vnet.ibm.com> Reviewed-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-04scsi_debug: rework resp_report_lunsDouglas Gilbert1-48/+87
Based on "[PATH V2] scsi_debug: rework resp_report_luns" patch sent by Tomas Winkler on Thursday, 26 Feb 2015. His notes: 1. Remove duplicated boundary checks which simplify the fill-in loop 2. Use more of scsi generic API Replace fixed length response array a with heap allocation allowing up to 256 normal LUNs per target. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-05-04scsi_debug: use pdt constantsDouglas Gilbert1-41/+45
Use TYPE_* constants for SCSI peripheral device types instead of numbers. Further cleanups requested by checkpatch.pl. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_debug: use likely hints on fast pathDouglas Gilbert1-114/+105
The most common commands in normal use are the READ and WRITE SCSI commands. Use likely and unlikely hints along the path taken by these commands. Rename check_readiness() to make_ua() and remove associated dead code. Rename devInfoReg() to find_build_dev_info(). Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_debug: re-order file scope declarationsDouglas Gilbert1-163/+151
Group most defines together first; followed by struct definitions and then table and variable definitions. Normalize all function headers. [mkp: Corrected hex value in WP/DPOFUA MODE SENSE comment] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_debug: replace tasklet with work queueDouglas Gilbert1-135/+95
When a negative value was placed in the delay parameter, a tasklet was scheduled. Change the tasklet to a work queue. Previously a delay of -1 scheduled a high priority tasklet; since there are no high priority work queues, treat -1 like other negative values in delay and schedule a work item. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_debug: make jiffy delay name clearerDouglas Gilbert1-23/+23
Add 'j' to delay names to make it clearer that its unit is jiffies and to differentiate it from sdebug_ndelay whose unit is nanoseconds. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_debug: replace jiffy timers with hr timersDouglas Gilbert1-35/+21
The driver supports two command delay interfaces, the original one whose unit is a jiffy, and a newer one whose unit is a nanosecond. Each had different implementations. Keep both interfaces but simplify the implemenation to use a single delay mechanism based on high resolution timers. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_debug: ignore host lock optionDouglas Gilbert1-37/+7
Remove logic to optionally hold host_lock while each command is queued. Keep module and sysfs host_lock parameters for backward compatibility. Note in module parameter description that host_lock is ignored. Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30scsi_debug: cleanup naming and bit crunchingDouglas Gilbert1-637/+525
Shorten file scope static and constant names. Use more get/put_unaligned calls to hide bit banging. Introduce sdebug_verbose boolean to replace frequent masking of option bit flags. Add GPL and bump version. [mkp: Use logical instead of bitwise OR for LBP VPD flags] Signed-off-by: Douglas Gilbert <dgilbert@interlog.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30hpsa: update driver versionDon Brace1-1/+1
Reviewed-by: Gerry Morong <gerry.morong@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30hpsa: correct handling of HBA device removalDon Brace2-5/+85
Need to report HBA device removal faster than the event handler polling interval. Stop I/O to the removed disk and wait for all I/O operations to flush before removing the device. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30hpsa: correct ioaccel2 error procecssing.Don Brace1-1/+3
set offload_to_be_enabled to 0 when an ioaccel2 error is processed. Before, an ioaccel completion error would turn of ioaccel but a rescan would turn it back on again. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30hpsa: correct ioaccel state change operationDon Brace1-1/+3
offload_to_be_enabled also needs to be set to 0 during a state change. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30hpsa: add timeouts for driver initiated commandsDon Brace1-19/+23
faulty drives can cause the driver to hang during a scan operation. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30hpsa: add sas_address to sysfs device attibuteJoseph T Handzik1-0/+25
There have been companies requesting a sysfs entry to obtain the sas address of device. Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30hpsa: correct initialization order issueDon Brace1-5/+5
The driver was calling scsi_scan_host before enabling interrupts. This has gone unnoticed except for customers running in intx mode. Calling scsi_scan_host before interrupts are enabled causes "irq XX: nobody cared" messages and the driver to hang. This patch enables interrupts before the call to scsi_scan_host. Reported-by: Piotr Karbowski <piotr.karbowski@gmail.com> Reviewed-by: Scott Teel <scott.teel@microsemi.com> Reviewed-by: Kevin Barnett <kevin.barnett@microsemi.com> Signed-off-by: Don Brace <don.brace@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Update driver versionRaghava Aditya Renukunta1-1/+1
Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Fix for KDUMP driver hangRaghava Aditya Renukunta2-0/+25
When KDUMP is triggered the driver first talks to the firmware in INTX mode, but the adapter firmware is still in MSIX mode. Therefore the first driver command hangs since the driver is waiting for an INTX response and firmware gives a MSIX response. If when the OS is installed on a RAID drive created by the adapter KDUMP will hang since the driver does not receive a response in sync mode. Fixed by: Change the firmware to INTX mode if it is in MSIX mode before sending the first sync command. Cc: stable@vger.kernel.org Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Remove code to needlessly complete fibRaghava Aditya Renukunta1-3/+4
Currently driver completes double completed or spurious interrupted fibs. This is not necessary and causes the SCSI mid layer to issue aborts and resets, since completing a fib prematurely might trigger a race condition resulting in the driver not calling the scsi_done callback. Fixed by removing the call to fib complete. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Log firmware AIF messagesRaghava Aditya Renukunta4-1/+35
Firmware AIF messages about cache loss and data recovery are being missed by the driver since currently they are not captured but rather let go. This patch to capture those messages and log them for the user. Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Fix for aac_command_thread hangRaghava Aditya Renukunta1-0/+4
Typically under error conditions, it is possible for aac_command_thread() to miss the wakeup from kthread_stop() and go back to sleep, causing it to hang aac_shutdown. In the observed scenario, the adapter is not functioning correctly and so aac_fib_send() never completes (or time-outs depending on how it was called). Shortly after aac_command_thread() starts it performs aac_fib_send(SendHostTime) which hangs. When aac_probe_one /aac_get_adapter_info send time outs, kthread_stop is called which breaks the command thread out of it's hang. The code will still go back to sleep in schedule_timeout() without checking kthread_should_stop() so it causes aac_probe_one to hang until the schedule_timeout() which is 30 minutes. Fixed by: Adding another kthread_should_stop() before schedule_timeout() Cc: stable@vger.kernel.org Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Disable MSI mode for series 6, 7, 8 cardsRaghava Aditya Renukunta1-15/+2
As the firmware for series 6, 7, 8 cards does not support msi, remove it in the driver Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Relinquish CPU during timeout waitRaghava Aditya Renukunta1-4/+4
aac_fib_send has a special function case for initial commands during driver initialization using wait < 0(pseudo sync mode). In this case, the command does not sleep but rather spins checking for timeout.This loop is calls cpu_relax() in an attempt to allow other processes/threads to use the CPU, but this function does not relinquish the CPU and so the command will hog the processor. This was observed in a KDUMP "crashkernel" and that prevented the "command thread" (which is responsible for completing the command from being timed out) from starting because it could not get the CPU. Fixed by replacing "cpu_relax()" call with "schedule()" Cc: stable@vger.kernel.org Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Start adapter after updating number of MSIX vectorsRaghava Aditya Renukunta1-1/+1
The adapter has to be started after updating the number of MSIX Vectors Fixes: ecc479e00db8 (aacraid: Set correct MSIX count for EEH recovery) Cc: stable@vger.kernel.org Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Fix incorrectly named MACRORaghava Aditya Renukunta2-2/+2
Suggested-by: Seymour, Shane M <shane.seymour@hpe.com> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30aacraid: Removed unnecessary checks for NULLRaghava Aditya Renukunta1-22/+0
Current driver checks for NULL return from aac_fib_alloc_tag, but it not possible for it to return NULL. Fixed by: Remove all the checks for NULL returns from aac_fib_alloc_tag Suggested-by: Tomas Henzl <thenzl@redhat.com> Signed-off-by: Raghava Aditya Renukunta <RaghavaAditya.Renukunta@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-30mptsas: fix checks for dma mapping errorsAlexey Khoroshilov1-2/+2
mptsas_smp_handler() checks for dma mapping errors by comparison returned address with zero, while pci_dma_mapping_error() should be used. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Acked-by: Sathya Prakash Veerichetty <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-26MAINTAINERS: Update the file list for the NCR 5380 entryFinn Thain1-1/+1
The file atari_NCR5380.c has been removed from the tree so remove it from the MAINTAINERS file as well. While we are here, add the file dtc3x80.txt as it is only relevant to the dtc driver. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-26st: clear ILI if Medium ErrorKai Makisara1-3/+6
Some drives set the ILI flag together with MEDIUM ERROR sense code. Clear the ILI flag in this case so that the medium error will be handled. The problem was reported by Maurizio Lombardi. Signed-off-by: Kai Mäkisara <kai.makisara@kolumbus.fi> Reviewed-by: Laurence Oberman <loberman@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-26lpfc: remove incorrect lockdep assertionSebastian Herbszt1-6/+3
Remove incorrect lockdep assertion from lpfc_sli_hbqbuf_find() which acquires the hbalock itself. Fix the comment which resulted in this mistake. Fixes: 1c2ba475eb0e ("lpfc: Add lockdep assertions") Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-26bnx2i: silence uninitialized variable warningsDan Carpenter1-2/+2
Presumably it isn't possible to have empty lists here, but my static checker doesn't know that and complains that "ep" can be used uninitialized. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-26hpsa: set the enclosure identifier to zeroDan Carpenter1-0/+1
This has only called from show_sas_rphy_enclosure_identifier(). The caller expects that we set an identifier, otherwise it uses an uninitialized variable. [mkp: fixed typo] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-26mpt3sas - remove unused fw_event_work elementsJoe Lawrence1-6/+4
Firmware events are queued up using the fw_event_work's struct work, not its delayed_work member. The initial driver for SAS2 controllers had handled firmware reset using the rescan barrier and was later redesigned through "mpt2sas: [Resend] Host Reset code cleanup". The delayed_work variables are now unused and may provoke CONFIG_DEBUG_OBJECTS_TIMERS "assert_init not available" false warnings in _scsih_fw_event_cleanup_queue. Cleanup fw_event_work's unused entries, update its kerneldoc, and update _scsih_fw_event_cleanup_queue accordingly. Fixes: 146b16c8071f (mpt3sas: Refcount fw_events and fix unsafe list usage) Signed-off-by: Joe Lawrence <joe.lawrence@stratus.com> Acked-by: Chaitra P B <chaitra.basappa@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15hisi_sas: add alloc_dev_quirk_v2_hw()John Garry1-0/+30
Add custom version of function to allocate device, alloc_dev_quirk_v2_hw(). For sata devices the device id bit0 should be 0. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15hisi_sas: add slot_index_alloc_quirk_v2_hw()John Garry1-0/+28
Add v2 hw custom function slot_index_alloc_quirk_v2_hw(). SAS devices should have IPTT bit0 equal to 1. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15hisi_sas: add device and slot alloc hw methodsJohn Garry2-2/+12
Add methods to use HW specific versions of functions to allocate slot and device. HW specific methods are permitted to workaround device id vs IPTT collision issue in v2 hw. Signed-off-by: John Garry <john.garry@huawei.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15megaraid_sas: driver version upgradeSumit Saxena1-2/+2
Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15megaraid_sas: task management code optimizationsSumit Saxena1-21/+46
This patch will do code optmization for task management functions. Below are key changes: 1. Remove reset_device hook as it was not being used and driver was setting this to NULL. 2. Create wrapper functions for task abort and target reset and inside these functions adapter specific calls be made. e.g. fusion adapters support task abort and target reset so task abort and target reset should be issued to fusion adapters only and for MFI adapters, print a message saying feature not supported. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15megaraid_sas: call ISR function to clean up pending replies in OCR pathSumit Saxena1-0/+2
In OCR path, before calling chip reset calls function megasas_wait_for_outstanding_fusion to check reason for OCR. In case of firmware FAULT initiated OCR and DCMD timeout initiated timeout, driver will clear any outstanding reply (yet to be processed by driver) in reply queues before going for chip reset. This code is added to handle a scenario when IO timeout initiated adapter reset and management application initiated adapter reset (by sending command to FAULT firmware) happens simultaneously since adapter reset function is safe-guarded by reset_mutex so only thread will be doing controller reset. Consider IO timeout thread gets mutex and proceeds with adapter reset process after disabling interrupts and by the time management application has fired command to firmware to do adapter reset and the same command is completed by firmware but since interrupts are disabled, driver will not get completion and the same command will be in outstanding/pending commands list of driver and refires same command from IO timeout thread after chip reset which will again FAULT firmware and eventually causes kill adapter. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15megaraid_sas: reduce memory footprints in kdump modeSumit Saxena3-19/+34
This patch will reduce memory footprints of megaraid_sas driver when booted in kdump mode. Driver will not allocate memory for optional and perfromance oriented features. Below are key changes done in megaraid_sas driver to do this: 1. Limit Controller's queue depth to 100 in kdump mode. 2. Do not allocate memory for system info buffer and PD info buffer. 3. Disable performance oriented features e.g. Disable RDPQ mode, disable dual queue depth, restrict to single MSI-x vector. Signed-off-by: Sumit Saxena <sumit.saxena@broadcom.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15scsi_dh_alua: Declare local functions staticBart Van Assche1-4/+4
This patch avoids that building with W=1 causes gcc to report the following type of warning: no previous prototype for ... [-Wmissing-prototypes] Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Hannes Reinicke <hare@suse.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Ewan Milne <emilne@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15mpt3sas: Remove usage of 'struct timeval'Tina Ruchandani1-4/+4
'struct timeval' will have its tv_sec value overflow on 32-bit systems in year 2038 and beyond. This patch replaces the use of struct timeval for computing mpi_request.TimeStamp, and instead uses ktime_t which provides 64-bit seconds value. The timestamp computed remains unaffected (milliseconds since Unix epoch). Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Sathya Prakash <sathya.prakash@broadcom.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15pm80xx: Remove bogus address masking in pm8001_ioremap()David Daney1-2/+0
It is unclear what the original intent of the masking was, but it is clearly incorrect to truncate a physical address before calling ioremap(). On systems where there are valid physical address bits above bit-31 (arm64 for example) the result is an eventual OOPs when initializing the driver. Remove the bogus code to fix it. Signed-off-by: David Daney <david.daney@cavium.com> Acked-by: Jack Wang <jinpu.wang@profitbricks.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-04-15qla2xxx: Remove use of 'struct timeval'Tina Ruchandani1-3/+2
struct register_host_info stores a 64-bit UTC system time timestamp. This patch removes the use of 'struct timeval' to obtain that timestamp as its tv_sec value will overflow on 32-bit systems in year 2038 beyond. The patch uses ktime_get_real_seconds() which returns a 64-bit seconds value. Signed-off-by: Tina Ruchandani <ruchandani.tina@gmail.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Acked-by: Himanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-19 11:50:03 +0300