summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-20ALSA: firewire-lib: fix uninitialized flag for AV/C deferred transactionTakashi Sakamoto1-3/+1
[ Upstream commit bf0cd60b7e33cf221fbe1114e4acb2c828b0af0d ] AV/C deferred transaction was supported at a commit 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction") while 'deferrable' flag can be uninitialized for non-control/notify AV/C transactions. UBSAN reports it: kernel: ================================================================================ kernel: UBSAN: invalid-load in /build/linux-aa0B4d/linux-5.15.0/sound/firewire/fcp.c:363:9 kernel: load of value 158 is not a valid value for type '_Bool' kernel: CPU: 3 PID: 182227 Comm: irq/35-firewire Tainted: P OE 5.15.0-18-generic #18-Ubuntu kernel: Hardware name: Gigabyte Technology Co., Ltd. AX370-Gaming 5/AX370-Gaming 5, BIOS F42b 08/01/2019 kernel: Call Trace: kernel: <IRQ> kernel: show_stack+0x52/0x58 kernel: dump_stack_lvl+0x4a/0x5f kernel: dump_stack+0x10/0x12 kernel: ubsan_epilogue+0x9/0x45 kernel: __ubsan_handle_load_invalid_value.cold+0x44/0x49 kernel: fcp_response.part.0.cold+0x1a/0x2b [snd_firewire_lib] kernel: fcp_response+0x28/0x30 [snd_firewire_lib] kernel: fw_core_handle_request+0x230/0x3d0 [firewire_core] kernel: handle_ar_packet+0x1d9/0x200 [firewire_ohci] kernel: ? handle_ar_packet+0x1d9/0x200 [firewire_ohci] kernel: ? transmit_complete_callback+0x9f/0x120 [firewire_core] kernel: ar_context_tasklet+0xa8/0x2e0 [firewire_ohci] kernel: tasklet_action_common.constprop.0+0xea/0xf0 kernel: tasklet_action+0x22/0x30 kernel: __do_softirq+0xd9/0x2e3 kernel: ? irq_finalize_oneshot.part.0+0xf0/0xf0 kernel: do_softirq+0x75/0xa0 kernel: </IRQ> kernel: <TASK> kernel: __local_bh_enable_ip+0x50/0x60 kernel: irq_forced_thread_fn+0x7e/0x90 kernel: irq_thread+0xba/0x190 kernel: ? irq_thread_fn+0x60/0x60 kernel: kthread+0x11e/0x140 kernel: ? irq_thread_check_affinity+0xf0/0xf0 kernel: ? set_kthread_struct+0x50/0x50 kernel: ret_from_fork+0x22/0x30 kernel: </TASK> kernel: ================================================================================ This commit fixes the bug. The bug has no disadvantage for the non- control/notify AV/C transactions since the flag has an effect for AV/C response with INTERIM (0x0f) status which is not used for the transactions in AV/C general specification. Fixes: 00a7bb81c20f ("ALSA: firewire-lib: Add support for deferred transaction") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Link: https://lore.kernel.org/r/20220304125647.78430-1-o-takashi@sakamocchi.jp Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20memory: emif: check the pointer temp in get_device_details()Jia-Ju Bai1-1/+1
[ Upstream commit 5b5ab1bfa1898c6d52936a57c25c5ceba2cb2f87 ] The pointer temp is allocated by devm_kzalloc(), so it should be checked for error handling. Fixes: 7ec944538dde ("memory: emif: add basic infrastructure for EMIF driver") Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20220225132552.27894-1-baijiaju1990@gmail.com Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20memory: emif: Add check for setup_interruptsJiasheng Jiang1-2/+4
[ Upstream commit fd7bd80b46373887b390852f490f21b07e209498 ] As the potential failure of the devm_request_threaded_irq(), it should be better to check the return value of the setup_interrupts() and return error if fails. Fixes: 68b4aee35d1f ("memory: emif: add interrupt and temperature handling") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220224025444.3256530-1-jiasheng@iscas.ac.cn Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ASoC: atmel_ssc_dai: Handle errors for clk_enableJiasheng Jiang1-1/+4
[ Upstream commit f9e2ca0640e59d19af0ff285ee5591ed39069b09 ] As the potential failure of the clk_enable(), it should be better to check it and return error if fals. Fixes: cbaadf0f90d6 ("ASoC: atmel_ssc_dai: refactor the startup and shutdown") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220301090637.3776558-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ASoC: mxs-saif: Handle errors for clk_enableJiasheng Jiang1-1/+4
[ Upstream commit 2ecf362d220317debf5da376e0390e9f7a3f7b29 ] As the potential failure of the clk_enable(), it should be better to check it, like mxs_saif_trigger(). Fixes: d0ba4c014934 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220301081717.3727190-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20printk: fix return value of printk.devkmsg __setup handlerRandy Dunlap1-2/+4
[ Upstream commit b665eae7a788c5e2bc10f9ac3c0137aa0ad1fc97 ] If an invalid option value is used with "printk.devkmsg=<value>", it is silently ignored. If a valid option value is used, it is honored but the wrong return value (0) is used, indicating that the command line option had an error and was not handled. This string is not added to init's environment strings due to init/main.c::unknown_bootoption() checking for a '.' in the boot option string and then considering that string to be an "Unused module parameter". Print a warning message if a bad option string is used. Always return 1 from the __setup handler to indicate that the command line option has been handled. Fixes: 750afe7babd1 ("printk: add kernel parameter to control writes to /dev/kmsg") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Cc: Borislav Petkov <bp@suse.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: John Ogness <john.ogness@linutronix.de> Reviewed-by: John Ogness <john.ogness@linutronix.de> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20220228220556.23484-1-rdunlap@infradead.org Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20arm64: dts: broadcom: Fix sata nodenameFrank Wunderlich1-1/+1
[ Upstream commit 55927cb44db43a57699fa652e2437a91620385dc ] After converting ahci-platform txt binding to yaml nodename is reported as not matching the standard: arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml: ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$' Fix it to match binding. Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2") Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20arm64: dts: ns2: Fix spi-cpol and spi-cpha propertyKuldeep Singh1-4/+4
[ Upstream commit c953c764e505428f59ffe6afb1c73b89b5b1ac35 ] Broadcom ns2 platform has spi-cpol and spi-cpho properties set incorrectly. As per spi-slave-peripheral-prop.yaml, these properties are of flag or boolean type and not integer type. Fix the values. Fixes: d69dbd9f41a7c (arm64: dts: Add ARM PL022 SPI DT nodes for NS2) Signed-off-by: Kuldeep Singh <singh.kuldeep87k@gmail.com> CC: Ray Jui <rjui@broadcom.com> CC: Scott Branden <sbranden@broadcom.com> CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ALSA: spi: Add check for clk_enable()Jiasheng Jiang1-6/+21
[ Upstream commit ca1697eb09208f0168d94b88b72f57505339cbe5 ] As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 3568459a5113 ("ALSA: at73c213: manage SSC clock") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/r/20220228022839.3547266-1-jiasheng@iscas.ac.cn Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ASoC: ti: davinci-i2s: Add check for clk_enable()Jiasheng Jiang1-1/+4
[ Upstream commit ed7c9fef11931fc5d32a83d68017ff390bf5c280 ] As the potential failure of the clk_enable(), it should be better to check it and return error if fails. Fixes: 5f9a50c3e55e ("ASoC: Davinci: McBSP: add device tree support for McBSP") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220228031540.3571959-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20media: usb: go7007: s2250-board: fix leak in probe()Dan Carpenter1-6/+4
[ Upstream commit 67e4550ecd6164bfbdff54c169e5bbf9ccfaf14d ] Call i2c_unregister_device(audio) on this error path. Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20soc: ti: wkup_m3_ipc: Fix IRQ check in wkup_m3_ipc_probeMiaoqian Lin1-2/+2
[ Upstream commit c3d66a164c726cc3b072232d3b6d87575d194084 ] platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example: int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; Fix the check of return value to catch errors correctly. Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Signed-off-by: Nishanth Menon <nm@ti.com> Acked-by: Dave Gerlach <d-gerlach@ti.com> Link: https://lore.kernel.org/r/20220114062840.16620-1-linmq006@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20ARM: dts: qcom: ipq4019: fix sleep clockPavel Kubelun1-1/+2
[ Upstream commit 3d7e7980993d2c1ae42d3d314040fc2de6a9c45f ] It seems like sleep_clk was copied from ipq806x. Fix ipq40xx sleep_clk to the value QSDK defines. Link: https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?id=d92ec59973484acc86dd24b67f10f8911b4b4b7d Link: https://patchwork.kernel.org/comment/22721613/ Fixes: bec6ba4cdf2a ("qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC") Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org> (clock-output-names) Signed-off-by: Pavel Kubelun <be.dissent@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> (removed clock rename) Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211220170352.34591-1-chunkeey@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20video: fbdev: fbcvt.c: fix printing in fb_cvt_print_name()Dan Carpenter1-32/+21
[ Upstream commit 78482af095abd9f4f29f1aa3fe575d25c6ae3028 ] This code has two bugs: 1) "cnt" is 255 but the size of the buffer is 256 so the last byte is not used. 2) If we try to print more than 255 characters then "cnt" will be negative and that will trigger a WARN() in snprintf(). The fix for this is to use scnprintf() instead of snprintf(). We can re-write this code to be cleaner: 1) Rename "offset" to "off" because that's shorter. 2) Get rid of the "cnt" variable and just use "size - off" directly. 3) Get rid of the "read" variable and just increment "off" directly. Fixes: 96fe6a2109db ("fbdev: Add VESA Coordinated Video Timings (CVT) support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20video: fbdev: smscufx: Fix null-ptr-deref in ufx_usb_probe()Wang Hai1-2/+1
[ Upstream commit 1791f487f877a9e83d81c8677bd3e7b259e7cb27 ] I got a null-ptr-deref report: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:fb_destroy_modelist+0x38/0x100 ... Call Trace: ufx_usb_probe.cold+0x2b5/0xac1 [smscufx] usb_probe_interface+0x1aa/0x3c0 [usbcore] really_probe+0x167/0x460 ... ret_from_fork+0x1f/0x30 If fb_alloc_cmap() fails in ufx_usb_probe(), fb_destroy_modelist() will be called to destroy modelist in the error handling path. But modelist has not been initialized yet, so it will result in null-ptr-deref. Initialize modelist before calling fb_alloc_cmap() to fix this bug. Fixes: 3c8a63e22a08 ("Add support for SMSC UFX6000/7000 USB display adapters") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20perf/x86/intel/pt: Fix address filter config for 32-bit kernelAdrian Hunter1-1/+1
[ Upstream commit e5524bf1047eb3b3f3f33b5f59897ba67b3ade87 ] Change from shifting 'unsigned long' to 'u64' to prevent the config bits being lost on a 32-bit kernel. Fixes: eadf48cab4b6b0 ("perf/x86/intel/pt: Add support for address range filtering in PT") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220131072453.2839535-5-adrian.hunter@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20perf/core: Fix address filter parser for multiple filtersAdrian Hunter1-0/+3
[ Upstream commit d680ff24e9e14444c63945b43a37ede7cd6958f9 ] Reset appropriate variables in the parser loop between parsing separate filters, so that they do not interfere with parsing the next filter. Fixes: 375637bc524952 ("perf/core: Introduce address range filtering") Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lore.kernel.org/r/20220131072453.2839535-4-adrian.hunter@intel.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20sched/debug: Remove mpol_get/put and task_lock/unlock from sched_show_numaBharata B Rao1-10/+0
[ Upstream commit 28c988c3ec29db74a1dda631b18785958d57df4f ] The older format of /proc/pid/sched printed home node info which required the mempolicy and task lock around mpol_get(). However the format has changed since then and there is no need for sched_show_numa() any more to have mempolicy argument, asssociated mpol_get/put and task_lock/unlock. Remove them. Fixes: 397f2378f1361 ("sched/numa: Fix numa balancing stats in /proc/pid/sched") Signed-off-by: Bharata B Rao <bharata@amd.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Acked-by: Mel Gorman <mgorman@suse.de> Link: https://lore.kernel.org/r/20220118050515.2973-1-bharata@amd.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20clocksource: acpi_pm: fix return value of __setup handlerRandy Dunlap1-2/+4
[ Upstream commit 6a861abceecb68497dd82a324fee45a5332dcece ] __setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled. A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) environment strings. The __setup() handler interface isn't meant to handle negative return values -- they are non-zero, so they mean "handled" (like a return value of 1 does), but that's just a quirk. So return 1 from parse_pmtmr(). Also print a warning message if kstrtouint() returns an error. Fixes: 6b148507d3d0 ("pmtmr: allow command line override of ioport") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20hwmon: (pmbus) Add Vin unit off handlingBrandon Wyman2-1/+2
[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ] If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well. Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults. If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear. Signed-off-by: Brandon Wyman <bjwyman@gmail.com> Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20crypto: ccp - ccp_dmaengine_unregister release dma channelsDāvis Mosāns1-0/+16
[ Upstream commit 54cce8ecb9254f971b40a72911c6da403720a2d2 ] ccp_dmaengine_register adds dma_chan->device_node to dma_dev->channels list but ccp_dmaengine_unregister didn't remove them. That can cause crashes in various dmaengine methods that tries to use dma_dev->channels Fixes: 58ea8abf4904 ("crypto: ccp - Register the CCP as a DMA...") Signed-off-by: Dāvis Mosāns <davispuh@gmail.com> Acked-by: John Allen <john.allen@amd.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20crypto: vmx - add missing dependenciesPetr Vorel1-0/+4
[ Upstream commit 647d41d3952d726d4ae49e853a9eff68ebad3b3f ] vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS, thus add them. These dependencies are likely to be enabled, but if CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built as module or disabled, alg_test() from crypto/testmgr.c complains during boot about failing to allocate the generic fallback implementations (2 == ENOENT): [ 0.540953] Failed to allocate xts(aes) fallback: -2 [ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2 [ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2) [ 0.544440] Failed to allocate ctr(aes) fallback: -2 [ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2 [ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2) [ 0.547992] Failed to allocate cbc(aes) fallback: -2 [ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2 [ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2) [ 0.550745] Failed to allocate transformation for 'aes': -2 [ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2 [ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2) Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS") Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64") Suggested-by: Nicolai Stange <nstange@suse.de> Signed-off-by: Petr Vorel <pvorel@suse.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20PM: suspend: fix return value of __setup handlerRandy Dunlap1-4/+4
[ Upstream commit 7a64ca17e4dd50d5f910769167f3553902777844 ] If an invalid option is given for "test_suspend=<option>", the entire string is added to init's environment, so return 1 instead of 0 from the __setup handler. Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5 test_suspend=invalid" and Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc5 test_suspend=invalid Fixes: 2ce986892faf ("PM / sleep: Enhance test_suspend option with repeat capability") Fixes: 27ddcc6596e5 ("PM / sleep: Add state field to pm_states[] entries") Fixes: a9d7052363a6 ("PM: Separate suspend to RAM functionality from core") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20PM: hibernate: fix __setup handler error handlingRandy Dunlap1-1/+1
[ Upstream commit ba7ffcd4c4da374b0f64666354eeeda7d3827131 ] If an invalid value is used in "resumedelay=<seconds>", it is silently ignored. Add a warning message and then let the __setup handler return 1 to indicate that the kernel command line option has been handled. Fixes: 317cf7e5e85e3 ("PM / hibernate: convert simple_strtoul to kstrtoul") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru> Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20hwmon: (sch56xx-common) Replace WDOG_ACTIVE with WDOG_HW_RUNNINGArmin Wolf1-1/+1
[ Upstream commit 647d6f09bea7dacf4cdb6d4ea7e3051883955297 ] If the watchdog was already enabled by the BIOS after booting, the watchdog infrastructure needs to regularly send keepalives to prevent a unexpected reset. WDOG_ACTIVE only serves as an status indicator for userspace, we want to use WDOG_HW_RUNNING instead. Since my Fujitsu Esprimo P720 does not support the watchdog, this change is compile-tested only. Suggested-by: Guenter Roeck <linux@roeck-us.net> Fixes: fb551405c0f8 (watchdog: sch56xx: Use watchdog core) Signed-off-by: Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220131211935.3656-5-W_Armin@gmx.de Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20hwmon: (pmbus) Add mutex to regulator opsPatrick Rudolph1-3/+13
[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ] On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register. Tested on Infineon xdpe11280 while a separate thread polls for sensor data. Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Marcello Sylvester Bauer <sylv@sylv.io> Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.1645804976.git.sylv@sylv.io Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull <atull@opensource.altera.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20selftests/x86: Add validity check and allow field splittingMuhammad Usama Anjum1-1/+1
[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ] Add check to test if CC has a string. CC can have multiple sub-strings like "ccache gcc". Erorr pops up if it is treated as single string and double quotes are used around it. This can be fixed by removing the quotes and not treating CC as a single string. Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection") Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20spi: tegra114: Add missing IRQ check in tegra_spi_probeMiaoqian Lin1-0/+4
[ Upstream commit 4f92724d4b92c024e721063f520d66e11ca4b54b ] This func misses checking for platform_get_irq()'s call and may passes the negative error codes to request_threaded_irq(), which takes unsigned IRQ #, causing it to fail with -EINVAL, overriding an original error code. Stop calling request_threaded_irq() with invalid IRQ #s. Fixes: f333a331adfa ("spi/tegra114: add spi driver") Signed-off-by: Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220128165238.25615-1-linmq006@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20crypto: mxs-dcp - Fix scatterlist processingTomas Paukrt1-1/+1
[ Upstream commit 28e9b6d8199a3f124682b143800c2dacdc3d70dd ] This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption. Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data") Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20crypto: authenc - Fix sleep in atomic context in decrypt_tailHerbert Xu1-1/+1
[ Upstream commit 66eae850333d639fc278d6f915c6fc01499ea893 ] The function crypto_authenc_decrypt_tail discards its flags argument and always relies on the flags from the original request when starting its sub-request. This is clearly wrong as it may cause the SLEEPABLE flag to be set when it shouldn't. Fixes: 92d95ba91772 ("crypto: authenc - Convert to new AEAD interface") Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Sasha Levin <sashal@kernel.org>
2022-04-20PCI: pciehp: Clear cmd_busy bit in polling modeLiguang Zhang1-0/+2
commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream. Writes to a Downstream Port's Slot Control register are PCIe hotplug "commands." If the Port supports Command Completed events, software must wait for a command to complete before writing to Slot Control again. pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr(). But when software notification is disabled, as it is when pcie_init() powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for command completion, and it neglects to clear ctrl->cmd_busy, which leads to spurious timeouts: pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago) pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago) Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed event (PCI_EXP_SLTSTA_CC). [bhelgaas: commit log] Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary") Link: https://lore.kernel.org/r/20211111054258.7309-1-zhangliguang@linux.alibaba.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143 Link: https://lore.kernel.org/r/20211126173309.GA12255@wunner.de Signed-off-by: Liguang Zhang <zhangliguang@linux.alibaba.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20brcmfmac: pcie: Replace brcmf_pcie_copy_mem_todev with memcpy_toioHector Martin1-44/+4
commit 9466987f246758eb7e9071ae58005253f631271e upstream. The alignment check was wrong (e.g. & 4 instead of & 3), and the logic was also inefficient if the length was not a multiple of 4, since it would needlessly fall back to copying the entire buffer bytewise. We already have a perfectly good memcpy_toio function, so just call that instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers was already using it anyway. Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20brcmfmac: firmware: Allocate space for default boardrev in nvramHector Martin1-0/+2
commit d19d8e3ba256f81ea4a27209dbbd1f0a00ef1903 upstream. If boardrev is missing from the NVRAM we add a default one, but this might need more space in the output buffer than was allocated. Ensure we have enough padding for this in the buffer. Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20media: davinci: vpif: fix unbalanced runtime PM getJohan Hovold1-0/+1
commit 4a321de239213300a714fa0353a5f1272d381a44 upstream. Make sure to balance the runtime PM usage counter on driver unbind. Fixes: 407ccc65bfd2 ("[media] davinci: vpif: add pm_runtime support") Cc: stable@vger.kernel.org # 3.9 Cc: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20DEC: Limit PMAX memory probing to R3k systemsMaciej W. Rozycki2-11/+6
commit 244eae91a94c6dab82b3232967d10eeb9dfa21c6 upstream. Recent tightening of the opcode table in binutils so as to consistently disallow the assembly or disassembly of CP0 instructions not supported by the processor architecture chosen has caused a regression like below: arch/mips/dec/prom/locore.S: Assembler messages: arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe' in a piece of code used to probe for memory with PMAX DECstation models, which have non-REX firmware. Those computers always have an R2000 CPU and consequently the exception handler used in memory probing uses the RFE instruction, which those processors use. While adding 64-bit support this code was correctly excluded for 64-bit configurations, however it should have also been excluded for irrelevant 32-bit configurations. Do this now then, and only enable PMAX memory probing for R3k systems. Reported-by: Jan-Benedict Glaw <jbglaw@lug-owl.de> Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20lib/raid6/test: fix multiple definition linking errorDirk Müller1-1/+0
commit a5359ddd052860bacf957e65fe819c63e974b3a6 upstream. GCC 10+ defaults to -fno-common, which enforces proper declaration of external references using "extern". without this change a link would fail with: lib/raid6/test/algos.c:28: multiple definition of `raid6_call'; lib/raid6/test/test.c:22: first defined here the pq.h header that is included already includes an extern declaration so we can just remove the redundant one here. Cc: <stable@vger.kernel.org> Signed-off-by: Dirk Müller <dmueller@suse.de> Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Song Liu <song@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20thermal: int340x: Increase bitmap sizeSrinivas Pandruvada1-1/+1
commit 668f69a5f863b877bc3ae129efe9a80b6f055141 upstream. The number of policies are 10, so can't be supported by the bitmap size of u8. Even though there are no platfoms with these many policies, but for correctness increase to u32. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Fixes: 16fc8eca1975 ("thermal/int340x_thermal: Add additional UUIDs") Cc: 5.1+ <stable@vger.kernel.org> # 5.1+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20carl9170: fix missing bit-wise or operator for tx_paramsColin Ian King1-1/+1
commit 02a95374b5eebdbd3b6413fd7ddec151d2ea75a1 upstream. Currently tx_params is being re-assigned with a new value and the previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten. The assignment operator is incorrect, the original intent was to bit-wise or the value in. Fix this by replacing the = operator with |= instead. Kudos to Christian Lamparter for suggesting the correct fix. Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Cc: <Stable@vger.kernel.org> Acked-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com> Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ARM: dts: exynos: add missing HDMI supplies on SMDK5420Krzysztof Kozlowski1-0/+3
commit 453a24ded415f7fce0499c6b0a2c7b28f84911f2 upstream. Add required VDD supplies to HDMI block on SMDK5420. Without them, the HDMI driver won't probe. Because of lack of schematics, use same supplies as on Arndale Octa and Odroid XU3 boards (voltage matches). Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220208171823.226211-3-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ARM: dts: exynos: add missing HDMI supplies on SMDK5250Krzysztof Kozlowski1-0/+3
commit 60a9914cb2061ba612a3f14f6ad329912b486360 upstream. Add required VDD supplies to HDMI block on SMDK5250. Without them, the HDMI driver won't probe. Because of lack of schematics, use same supplies as on Arndale 5250 board (voltage matches). Cc: <stable@vger.kernel.org> # v3.15+ Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20220208171823.226211-2-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ARM: dts: exynos: fix UART3 pins configuration in Exynos5250Krzysztof Kozlowski1-1/+1
commit 372d7027fed43c8570018e124cf78b89523a1f8e upstream. The gpa1-4 pin was put twice in UART3 pin configuration of Exynos5250, instead of proper pin gpa1-5. Fixes: f8bfe2b050f3 ("ARM: dts: add pin state information in client nodes for Exynos5 platforms") Cc: <stable@vger.kernel.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com> Link: https://lore.kernel.org/r/20211230195325.328220-1-krzysztof.kozlowski@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20video: fbdev: atari: Atari 2 bpp (STe) palette bugfixMichael Schmitz1-6/+6
commit c8be5edbd36ceed2ff3d6b8f8e40643c3f396ea3 upstream. The code to set the shifter STe palette registers has a long standing operator precedence bug, manifesting as colors set on a 2 bits per pixel frame buffer coming up with a distinctive blue tint. Add parentheses around the calculation of the per-color palette data before shifting those into their respective bit field position. This bug goes back a long way (2.4 days at the very least) so there won't be a Fixes: tag. Tested on ARAnyM as well on Falcon030 hardware. Cc: stable@vger.kernel.org Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/all/CAMuHMdU3ievhXxKR_xi_v3aumnYW7UNUO6qMdhgfyWTyVSsCkQ@mail.gmail.com Tested-by: Michael Schmitz <schmitzmic@gmail.com> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Michael Schmitz <schmitzmic@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20video: fbdev: sm712fb: Fix crash in smtcfb_read()Helge Deller1-18/+7
commit bd771cf5c4254511cc4abb88f3dab3bd58bdf8e8 upstream. Zheyu Ma reported this crash in the sm712fb driver when reading three bytes from the framebuffer: BUG: unable to handle page fault for address: ffffc90001ffffff RIP: 0010:smtcfb_read+0x230/0x3e0 Call Trace: vfs_read+0x198/0xa00 ? do_sys_openat2+0x27d/0x350 ? __fget_light+0x54/0x340 ksys_read+0xce/0x190 do_syscall_64+0x43/0x90 Fix it by removing the open-coded endianess fixup-code and by moving the pointer post decrement out the fb_readl() function. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Helge Deller <deller@gmx.de> Tested-by: Zheyu Ma <zheyuma97@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20drivers: hamradio: 6pack: fix UAF bug caused by mod_timer()Duoming Zhou1-2/+2
commit efe4186e6a1b54bf38b9e05450d43b0da1fd7739 upstream. When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl(). This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released. One of the possible race conditions is shown below: (USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ... The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ... This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again. Signed-off-by: Duoming Zhou <duoming@zju.edu.cn> Reviewed-by: Lin Ma <linma@zju.edu.cn> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20ALSA: cs4236: fix an incorrect NULL check on list iteratorXiaomeng Tong1-3/+5
commit 0112f822f8a6d8039c94e0bc9b264d7ffc5d4704 upstream. The bug is here: err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev); The list iterator value 'cdev' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found. To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'cdev' as a dedicated pointer to point to the found element. And snd_card_cs423x_pnp() itself has NULL check for cdev. Cc: stable@vger.kernel.org Fixes: c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection") Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327060822.4735-1-xiam0nd.tong@gmail.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20Revert "Input: clear BTN_RIGHT/MIDDLE on buttonpads"José Expósito1-6/+0
commit 8b188fba75195745026e11d408e4a7e94e01d701 upstream. This reverts commit 37ef4c19b4c659926ce65a7ac709ceaefb211c40. The touchpad present in the Dell Precision 7550 and 7750 laptops reports a HID_DG_BUTTONTYPE of type MT_BUTTONTYPE_CLICKPAD. However, the device is not a clickpad, it is a touchpad with physical buttons. In order to fix this issue, a quirk for the device was introduced in libinput [1] [2] to disable the INPUT_PROP_BUTTONPAD property: [Precision 7x50 Touchpad] MatchBus=i2c MatchUdevType=touchpad MatchDMIModalias=dmi:*svnDellInc.:pnPrecision7?50* AttrInputPropDisable=INPUT_PROP_BUTTONPAD However, because of the change introduced in 37ef4c19b4 ("Input: clear BTN_RIGHT/MIDDLE on buttonpads") the BTN_RIGHT key bit is not mapped anymore breaking the device right click button and making impossible to workaround it in user space. In order to avoid breakage on other present or future devices, revert the patch causing the issue. Signed-off-by: José Expósito <jose.exposito89@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220321184404.20025-1-jose.exposito89@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20scsi: libsas: Fix sas_ata_qc_issue() handling of NCQ NON DATA commandsDamien Le Moal1-1/+1
commit 8454563e4c2aafbfb81a383ab423ea8b9b430a25 upstream. To detect for the DMA_NONE (no data transfer) DMA direction, sas_ata_qc_issue() tests if the command protocol is ATA_PROT_NODATA. This test does not include the ATA_CMD_NCQ_NON_DATA command as this command protocol is defined as ATA_PROT_NCQ_NODATA (equal to ATA_PROT_FLAG_NCQ) and not as ATA_PROT_NODATA. To include both NCQ and non-NCQ commands when testing for the DMA_NONE DMA direction, use "!ata_is_data()". Link: https://lore.kernel.org/r/20220220031810.738362-2-damien.lemoal@opensource.wdc.com Fixes: 176ddd89171d ("scsi: libsas: Reset num_scatter if libata marks qc as NODATA") Cc: stable@vger.kernel.org Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jack Wang <jinpu.wang@ionos.com> Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20mempolicy: mbind_range() set_policy() after vma_merge()Hugh Dickins1-7/+1
commit 4e0906008cdb56381638aa17d9c32734eae6d37a upstream. v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced vma_merge() to mbind_range(); but unlike madvise, mlock and mprotect, it put a "continue" to next vma where its precedents go to update flags on current vma before advancing: that left vma with the wrong setting in the infamous vma_merge() case 8. v3.10 commit 1444f92c8498 ("mm: merging memory blocks resets mempolicy") tried to fix that in vma_adjust(), without fully understanding the issue. v3.11 commit 3964acd0dbec ("mm: mempolicy: fix mbind_range() && vma_adjust() interaction") reverted that, and went about the fix in the right way, but chose to optimize out an unnecessary mpol_dup() with a prior mpol_equal() test. But on tmpfs, that also pessimized out the vital call to its ->set_policy(), leaving the new mbind unenforced. The user visible effect was that the pages got allocated on the local node (happened to be 0), after the mbind() caller had specifically asked for them to be allocated on node 1. There was not any page migration involved in the case reported: the pages simply got allocated on the wrong node. Just delete that optimization now (though it could be made conditional on vma not having a set_policy). Also remove the "next" variable: it turned out to be blameless, but also pointless. Link: https://lkml.kernel.org/r/319e4db9-64ae-4bca-92f0-ade85d342ff@google.com Fixes: 3964acd0dbec ("mm: mempolicy: fix mbind_range() && vma_adjust() interaction") Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Reviewed-by: Liam R. Howlett <Liam.Howlett@oracle.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20mm/pages_alloc.c: don't create ZONE_MOVABLE beyond the end of a nodeAlistair Popple1-1/+8
commit ddbc84f3f595cf1fc8234a191193b5d20ad43938 upstream. ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not enough room for ZONE_MOVABLE on that node. Unfortunately this condition is not checked for. This leads to zone_movable_pfn[] getting set to a pfn greater than the last pfn in a node. calculate_node_totalpages() then sets zone->present_pages to be greater than zone->spanned_pages which is invalid, as spanned_pages represents the maximum number of pages in a zone assuming no holes. Subsequently it is possible free_area_init_core() will observe a zone of size zero with present pages. In this case it will skip setting up the zone, including the initialisation of free_lists[]. However populated_zone() checks zone->present_pages to see if a zone has memory available. This is used by iterators such as walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the free_list of each zone in each node, which are assumed to be initialised due to the zone not being empty. As free_area_init_core() never initialised the free_lists[] this results in the following kernel crash when trying to read /proc/pagetypeinfo: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:pagetypeinfo_show+0x163/0x460 Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82 RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003 RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00 R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000 FS: 00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0 Call Trace: seq_read_iter+0x128/0x460 proc_reg_read_iter+0x51/0x80 new_sync_read+0x113/0x1a0 vfs_read+0x136/0x1d0 ksys_read+0x70/0xf0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fix this by checking that the aligned zone_movable_pfn[] does not exceed the end of the node, and if it does skip creating a movable zone on this node. Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com Fixes: 2a1e274acf0b ("Create the ZONE_MOVABLE zone") Signed-off-by: Alistair Popple <apopple@nvidia.com> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Mel Gorman <mgorman@techsingularity.net> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Zi Yan <ziy@nvidia.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2022-04-20jffs2: fix memory leak in jffs2_scan_mediumBaokun Li1-2/+4
commit 9cdd3128874f5fe759e2c4e1360ab7fb96a8d1df upstream. If an error is returned in jffs2_scan_eraseblock() and some memory has been added to the jffs2_summary *s, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff88812b889c40 (size 64): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): 40 48 b5 14 81 88 ff ff 01 e0 31 00 00 00 50 00 @H........1...P. 00 00 01 00 00 00 01 00 00 00 02 00 00 00 09 08 ................ backtrace: [<ffffffffae93a3a3>] __kmalloc+0x613/0x910 [<ffffffffaf423b9c>] jffs2_sum_add_dirent_mem+0x5c/0xa0 [<ffffffffb0f3afa8>] jffs2_scan_medium.cold+0x36e5/0x4794 [<ffffffffb0f3dbe1>] jffs2_do_mount_fs.cold+0xa7/0x2267 [<ffffffffaf40acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffaf40c00a>] jffs2_fill_super+0x2ea/0x4c0 [<ffffffffb0315d64>] mtd_get_sb+0x254/0x400 [<ffffffffb0315f5f>] mtd_get_sb_by_nr+0x4f/0xd0 [<ffffffffb0316478>] get_tree_mtd+0x498/0x840 [<ffffffffaf40bd15>] jffs2_get_tree+0x25/0x30 [<ffffffffae9f358d>] vfs_get_tree+0x8d/0x2e0 [<ffffffffaea7a98f>] path_mount+0x50f/0x1e50 [<ffffffffaea7c3d7>] do_mount+0x107/0x130 [<ffffffffaea7c5c5>] __se_sys_mount+0x1c5/0x2f0 [<ffffffffaea7c917>] __x64_sys_mount+0xc7/0x160 [<ffffffffb10142f5>] do_syscall_64+0x45/0x70 unreferenced object 0xffff888114b54840 (size 32): comm "mount", pid 692, jiffies 4294838325 (age 34.288s) hex dump (first 32 bytes): c0 75 b5 14 81 88 ff ff 02 e0 02 00 00 00 02 00 .u.............. 00 00 84 00 00 00 44 00 00 00 6b 6b 6b 6b 6b a5 ......D...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423b04>] jffs2_sum_add_inode_mem+0x54/0x90 [<ffffffffb0f3bd44>] jffs2_scan_medium.cold+0x4481/0x4794 [...] unreferenced object 0xffff888114b57280 (size 32): comm "mount", pid 692, jiffies 4294838393 (age 34.357s) hex dump (first 32 bytes): 10 d5 6c 11 81 88 ff ff 08 e0 05 00 00 00 01 00 ..l............. 00 00 38 02 00 00 28 00 00 00 6b 6b 6b 6b 6b a5 ..8...(...kkkkk. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423c34>] jffs2_sum_add_xattr_mem+0x54/0x90 [<ffffffffb0f3a24f>] jffs2_scan_medium.cold+0x298c/0x4794 [...] unreferenced object 0xffff8881116cd510 (size 16): comm "mount", pid 692, jiffies 4294838395 (age 34.355s) hex dump (first 16 bytes): 00 00 00 00 00 00 00 00 09 e0 60 02 00 00 6b a5 ..........`...k. backtrace: [<ffffffffae93be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffaf423cc4>] jffs2_sum_add_xref_mem+0x54/0x90 [<ffffffffb0f3b2e3>] jffs2_scan_medium.cold+0x3a20/0x4794 [...] -------------------------------------------- Therefore, we should call jffs2_sum_reset_collected(s) on exit to release the memory added in s. In addition, a new tag "out_buf" is added to prevent the NULL pointer reference caused by s being NULL. (thanks to Zhang Yi for this analysis) Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org Co-developed-with: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 00:48:30 +0300