summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-06-14dcbnl: Return consistent error codesThomas Graf1-135/+138
EMSGSIZE - ran out of space while constructing message EOPNOTSUPP - driver/hardware does not support operation ENODEV - network device not found EINVAL - invalid message Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14dcbnl: Use dcbnl_newmsg() where possibleThomas Graf1-14/+2
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14dcbnl: Remove now unused dcbnl_reply()Thomas Graf1-37/+0
Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14dcbnl: Shorten all command handling functionsThomas Graf1-550/+172
Allocating and sending the skb in dcb_doit() allows for much shorter and cleaner command handling functions. The huge switch statement is replaced with an array based definition of the handling function and reply message type. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14dcbnl: Prepare framework to shorten handling functionsThomas Graf1-0/+71
There is no need to allocate and send the reply message in each handling function separately. Instead, the reply skb can be allocated and sent in dcb_doit() directly. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller47-155/+2180
Conflicts: MAINTAINERS drivers/net/wireless/iwlwifi/pcie/trans.c The iwlwifi conflict was resolved by keeping the code added in 'net' that turns off the buggy chip feature. The MAINTAINERS conflict was merely overlapping changes, one change updated all the wireless web site URLs and the other changed some GIT trees to be Johannes's instead of John's. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13ethtool: Make more commands available to unprivileged processesBen Hutchings1-0/+5
'Get' commands should generally not require CAP_NET_ADMIN, with the exception of those that expose internal state. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13net-next: add dev_loopback_xmit() to avoid duplicate codeMichel Machado4-29/+21
Add dev_loopback_xmit() in order to deduplicate functions ip_dev_loopback_xmit() (in net/ipv4/ip_output.c) and ip6_dev_loopback_xmit() (in net/ipv6/ip6_output.c). I was about to reinvent the wheel when I noticed that ip_dev_loopback_xmit() and ip6_dev_loopback_xmit() do exactly what I need and are not IP-only functions, but they were not available to reuse elsewhere. ip6_dev_loopback_xmit() does not have line "skb_dst_force(skb);", but I understand that this is harmless, and should be in dev_loopback_xmit(). Signed-off-by: Michel Machado <michel@digirati.com.br> CC: "David S. Miller" <davem@davemloft.net> CC: Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> CC: James Morris <jmorris@namei.org> CC: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> CC: Patrick McHardy <kaber@trash.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jpirko@redhat.com> CC: "Michał Mirosław" <mirq-linux@rere.qmqm.pl> CC: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13bonding: remove packet cloning in recv_probe()Eric Dumazet5-40/+36
Cloning all packets in input path have a significant cost. Use skb_header_pointer()/skb_copy_bits() instead of pskb_may_pull() so that recv_probe handlers (bond_3ad_lacpdu_recv / bond_arp_rcv / rlb_arp_recv ) dont touch input skb. bond_handle_frame() can avoid the skb_clone()/dev_kfree_skb() Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Cc: Maciej Żenczykowski <maze@google.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13usbnet: don't initialize transfer buffer before submit status URBtom.leiming@gmail.com1-1/+0
The line below in intr_complete isn't needed, memset(urb->transfer_buffer, 0, urb->transfer_buffer_length); so just remove it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13usbnet: remove declaration for intr_completetom.leiming@gmail.com1-37/+35
Remove declaration for intr_complete so that ctags may be happy to decrease duplicated symbols, also decrease one line code. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13usbnet: remove flag of EVENT_DEV_WAKINGtom.leiming@gmail.com1-3/+2
The flag of EVENT_DEV_WAKING is not used any more, so just remove it. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13usbnet:cdc-phonet: remove usb_get/put_dev in .probe and .disconnecttom.leiming@gmail.com1-3/+1
usb_device is parent device of usb_interface in the view of driver model, so its reference count is always held during .probe/.disconnect of usb_interface instance. This patch just removes the unnecessay usb_get/put_dev. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13usbnet:pegasus: remove usb_get/put_dev in .probe and .disconnecttom.leiming@gmail.com1-4/+0
usb_device is parent device of usb_interface in the view of driver model, so its reference count is always held during .probe/.disconnect of usb_interface instance. This patch just removes the unnecessay usb_get/put_dev. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13usbnet: remove usb_get/put_dev in .probe and .disconnecttom.leiming@gmail.com1-4/+0
usb_device is parent device of usb_interface in the view of driver model, so its reference count is always held during .probe/.disconnect of usb_interface instance. This patch just removes the unnecessay usb_get/put_dev. Signed-off-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13bonding: Fix corrupted queue_mappingEric Dumazet2-6/+10
In the transmit path of the bonding driver, skb->cb is used to stash the skb->queue_mapping so that the bonding device can set its own queue mapping. This value becomes corrupted since the skb->cb is also used in __dev_xmit_skb. When transmitting through bonding driver, bond_select_queue is called from dev_queue_xmit. In bond_select_queue the original skb->queue_mapping is copied into skb->cb (via bond_queue_mapping) and skb->queue_mapping is overwritten with the bond driver queue. Subsequently in dev_queue_xmit, __dev_xmit_skb is called which writes the packet length into skb->cb, thereby overwriting the stashed queue mappping. In bond_dev_queue_xmit (called from hard_start_xmit), the queue mapping for the skb is set to the stashed value which is now the skb length and hence is an invalid queue for the slave device. If we want to save skb->queue_mapping into skb->cb[], best place is to add a field in struct qdisc_skb_cb, to make sure it wont conflict with other layers (eg : Qdiscc, Infiniband...) This patchs also makes sure (struct qdisc_skb_cb)->data is aligned on 8 bytes : netem qdisc for example assumes it can store an u64 in it, without misalignment penalty. Note : we only have 20 bytes left in (struct qdisc_skb_cb)->data[]. The largest user is CHOKe and it fills it. Based on a previous patch from Tom Herbert. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Tom Herbert <therbert@google.com> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Roland Dreier <roland@kernel.org> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13ipv4: Add interface option to enable routing of 127.0.0.0/8Thomas Graf5-11/+34
Routing of 127/8 is tradtionally forbidden, we consider packets from that address block martian when routing and do not process corresponding ARP requests. This is a sane default but renders a huge address space practically unuseable. The RFC states that no address within the 127/8 block should ever appear on any network anywhere but it does not forbid the use of such addresses outside of the loopback device in particular. For example to address a pool of virtual guests behind a load balancer. This patch adds a new interface option 'route_localnet' enabling routing of the 127/8 address block and processing of ARP requests on a specific interface. Note that for the feature to work, the default local route covering 127/8 dev lo needs to be removed. Example: $ sysctl -w net.ipv4.conf.eth0.route_localnet=1 $ ip route del 127.0.0.0/8 dev lo table local $ ip addr add 127.1.0.1/16 dev eth0 $ ip route flush cache V2: Fix invalid check to auto flush cache (thanks davem) Signed-off-by: Thomas Graf <tgraf@suug.ch> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13bonding:record primary when modify it via sysfsWeiping Pan1-2/+6
If we modify primary via sysfs and it is not a valid slave, we should record it for future use, and this behavior is the same with bond_check_params(). Signed-off-by: Weiping Pan <wpan@redhat.com> Acked-by: Nicolas de Pesloüan <nicolas.2p.debian@free.fr> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13Merge branch 'master' of git://1984.lsi.us.es/netDavid S. Miller3-34/+48
2012-06-12Merge branch 'master' of ↵John W. Linville219-7378/+12126
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem
2012-06-12tilegx network driver: initial supportChris Metcalf3-2/+1902
This change adds support for the tilegx network driver based on the GXIO IORPC support in the tilegx software stack, using the on-chip mPIPE packet processing engine. Signed-off-by: Chris Metcalf <cmetcalf@tilera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12phy: Use pr_<level>Joe Perches7-36/+50
Use a more current logging style. Add pr_fmt and missing newlines. Remove embedded prefixes. Neaten phy_print_status to avoid using KERN_CONT. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12tg3: Apply short DMA frag workaround to 5906Matt Carlson1-1/+2
5906 devices also need the short DMA fragment workaround. This patch makes the necessary change. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Tested-by: Christian Kujau <lists@nerdbynature.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12af_packet: use sizeof instead of constant in spkt_devicedanborkmann@iogearbox.net1-1/+1
This small patch removes access to the last element of the spkt_device array through a constant. Instead, it is accessed by sizeof() to respect possible changes in if_packet.h. Signed-off-by: Daniel Borkmann <daniel.borkmann@tik.ee.ethz.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12net: stmmac: Fix clock en-/disable callsStefan Roese1-2/+2
clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12inet: Fix BUG triggered by __rt{,6}_get_peer().David S. Miller2-2/+2
If no peer actually gets attached (either because create is zero or the peer allocation fails) we'll trigger a BUG because we unconditionally do an rt{,6}_peer_ptr() afterwards. Fix this by guarding it with the proper check. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12netfilter: nf_ct_tcp, udp: fix compilation with sysctl disabledPablo Neira Ayuso2-3/+3
This patch fixes the compilation of the TCP and UDP trackers with sysctl compilation disabled: net/netfilter/nf_conntrack_proto_udp.c: In function ‘udp_init_net_data’: net/netfilter/nf_conntrack_proto_udp.c:279:13: error: ‘struct nf_proto_net’ has no member named ‘user’ net/netfilter/nf_conntrack_proto_tcp.c:1606:9: error: ‘struct nf_proto_net’ has no member named ‘user’ net/netfilter/nf_conntrack_proto_tcp.c:1643:9: error: ‘struct nf_proto_net’ has no member named ‘user’ Reported-by: Fengguang Wu <wfg@linux.intel.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12lpc_eth: fix tx completionEric Dumazet1-5/+5
__lpc_handle_xmit() has two bugs : 1) It can leak skbs in case TXSTATUS_ERROR is set 2) It can wake up txqueue while no slot was freed. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Roland Stigge <stigge@antcom.de> Tested-by: Roland Stigge <stigge@antcom.de> Cc: Kevin Wells <kevin.wells@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12lpc_eth: add missing ndo_change_mtu()Eric Dumazet1-0/+1
lpc_eth does a copy of transmitted skbs to DMA area, without checking skb lengths, so can trigger buffer overflows : memcpy(pldat->tx_buff_v + txidx * ENET_MAXF_SIZE, skb->data, len); One way to get bigger skbs is to allow MTU changes above the 1500 limit. Calling eth_change_mtu() in ndo_change_mtu() makes sure this cannot happen. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Roland Stigge <stigge@antcom.de> Cc: Kevin Wells <kevin.wells@nxp.com> Acked-by: Roland Stigge <stigge@antcom.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-12net: keep name_hlist close to nameEric Dumazet1-3/+4
__dev_get_by_name() is slow because pm_qos_req has been inserted between name[] and name_hlist, adding cache misses. pm_qos_req has nothing to do at the beginning of struct net_device Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11Merge branch 'master' of git://1984.lsi.us.es/net-nextDavid S. Miller34-584/+1300
2012-06-11ssb: add missing PCI ID for b/g/n single band BCM4322Jonas Gorski1-0/+1
14e4:432c is found on some bcm63xx devices. The device is working fine with b43. Reported-by: Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11ath9k_hw: Initvals update for AR9462Sujith Manoharan1-0/+1
MSI is enabled by default for most of the 4th generation chips. Add this for AR9462 - this fixes PowerSave operation, the chip was not entering Network-Sleep mode earlier. With proper powering down of the MAC now, power consumption in associated state is reduced considerably. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11mwifiex: scan less channels per scan command to improve Tx trafficAmitkumar Karwar1-7/+27
Currently 4 channels are scanned per scan command. if scan request is issued by user during Tx traffic, radio will be out of channel for "4 * per_chan_scan_time" for each scan command and will not be able to receive Rx packets. This adds delay in data traffic. We can minimize it by reducing number of channels scanned per scan command in this scenario. We can not always scan 1 channel per scan command due to limitation of number of command buffers. So we add code to decide number of channels scanned per scan command in associated state. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11mwifiex: fix simultaneous scan and Tx traffic problemAmitkumar Karwar4-10/+89
If scan operation is started when Tx traffic is already running, driver locks Tx queue until it gets completed. With this logic there is a delay for Tx packets. This patch implements new approach to give Tx path higher priority in this case. Driver internally sends multiple synchronous scan commands to firmware when scan is requested by user. Now we will make sure that Tx queue is empty everytime before sending next scan command. If Tx queue isn't empty scan command will be postponsed by 20msec. This rule will be followed until Tx queue becomes empty or timeout of 1 second happens. In case of timeout scan operation will be aborted. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11mwifiex: shorten per channel scan timeBing Zhao1-3/+3
Currently the scan time per channel for active scanning is set to 200ms. It takes quite a while to finsh scanning on all channels, especially with a dual band configuration. Change the per channel scan time settings to the following values: passive scan: 110ms active scan: 30ms specific scan: 30ms Above settings have been tested on x86 and arm platforms. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-11Merge branch 'for-john' of ↵John W. Linville53-2553/+2329
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next Conflicts: drivers/net/wireless/iwlwifi/iwl-eeprom.c
2012-06-11Merge tag 'nfc-next-3.6-1' of ↵John W. Linville16-392/+1106
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-3.0
2012-06-11Merge branch 'master' of ↵John W. Linville13-31/+69
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-06-11inet: Avoid potential NULL peer dereference.David S. Miller3-10/+13
We handle NULL in rt{,6}_set_peer but then our caller will try to pass that NULL pointer into inet_putpeer() which isn't ready for it. Fix this by moving the NULL check one level up, and then remove the now unnecessary NULL check from inetpeer_ptr_set_peer(). Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11inet: Use FIB table peer roots in routes.David S. Miller2-8/+14
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11inet: Add inetpeer tree roots to the FIB tables.David S. Miller4-5/+16
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11inet: Add family scope inetpeer flushes.David S. Miller3-1/+31
This implementation can deal with having many inetpeer roots, which is a necessary prerequisite for per-FIB table rooted peer tables. Each family (AF_INET, AF_INET6) has a sequence number which we bump when we get a family invalidation request. Each peer lookup cheaply checks whether the flush sequence of the root we are using is out of date, and if so flushes it and updates the sequence number. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11ipv4: Kill ip_rt_frag_needed().David S. Miller4-70/+1
There is zero point to this function. It's only real substance is to perform an extremely outdated BSD4.2 ICMP check, which we can safely remove. If you really have a MTU limited link being routed by a BSD4.2 derived system, here's a nickel go buy yourself a real router. The other actions of ip_rt_frag_needed(), checking and conditionally updating the peer, are done by the per-protocol handlers of the ICMP event. TCP, UDP, et al. have a handler which will receive this event and transmit it back into the associated route via dst_ops->update_pmtu(). This simplification is important, because it eliminates the one place where we do not have a proper route context in which to make an inetpeer lookup. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11inet: Hide route peer accesses behind helpers.David S. Miller8-59/+193
We encode the pointer(s) into an unsigned long with one state bit. The state bit is used so we can store the inetpeer tree root to use when resolving the peer later. Later the peer roots will be per-FIB table, and this change works to facilitate that. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11dummy: fix rcu_sched self-detected stallsEric Dumazet1-1/+3
Trying to "modprobe dummy numdummies=30000" triggers : INFO: rcu_sched self-detected stall on CPU { 8} (t=60000 jiffies) After this splat, RTNL is locked and reboot is needed. We must call cond_resched() to avoid this, even holding RTNL. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11net: Reorder initialization in ip_route_output to fix gcc warningRoland Dreier1-1/+1
If I build with W=1, for every file that includes <net/route.h>, I get the warning include/net/route.h: In function 'ip_route_output': include/net/route.h:135:3: warning: initialized field overwritten [-Woverride-init] include/net/route.h:135:3: warning: (near initialization for 'fl4') [-Woverride-init] (This is with "gcc (Debian 4.6.3-1) 4.6.3") A fix seems pretty trivial: move the initialization of .flowi4_tos earlier. As far as I can tell, this has no effect on code generation. Signed-off-by: Roland Dreier <roland@purestorage.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11virtio-net: fix a race on 32bit archesEric Dumazet1-7/+12
commit 3fa2a1df909 (virtio-net: per cpu 64 bit stats (v2)) added a race on 32bit arches. We must use separate syncp for rx and tx path as they can be run at the same time on different cpus. Thus one sequence increment can be lost and readers spin forever. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Stephen Hemminger <shemminger@vyatta.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-11r8169: avoid NAPI scheduling delay.françois romieu1-5/+1
While reworking the r8169 driver a few months ago to perform the smallest amount of work in the irq handler, I took care of avoiding any irq mask register operation in the slow work dedicated user context thread. The slow work thread scheduled an extra round of NAPI work which would ultimately set the irq mask register as required, thus keeping such irq mask operations in the NAPI handler. It would eventually race with the irq handler and delay NAPI execution for - assuming no further irq - a whole ksoftirqd period. Mildly a problem for rare link changes or corner case PCI events. The race was always lost after the last bh disabling lock had been removed from the work thread and people started wondering where those pesky "NOHZ: local_softirq_pending 08" messages came from. Actually the irq mask register _can_ be set up directly in the slow work thread. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Dave Jones <davej@redhat.com> Tested-by: Marc Dionne <marc.c.dionne@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-10net: Make linux/tcp.h C++ friendly (trivial)Paul Pluzhnikov1-10/+10
I originally sent this patch to <trivial@kernel.org>, but Jiri Kosina did not feel that this is fully appropriate for the trivial tree. Using linux/tcp.h from C++ results in: cat t.cc #include <linux/tcp.h> int main() { } g++ -c t.cc In file included from t.cc:1: /usr/include/linux/tcp.h:72: error: '__u32 __fswab32(__u32)' cannot appear in a constant-expression /usr/include/linux/tcp.h:72: error: a function call cannot appear in a constant-expression ... Attached trivial patch fixes this problem. Tested: - the t.cc above compiles with g++ and - the following program generates the same output before/after the patch: #include <linux/tcp.h> #include <stdio.h> int main () { #define P(a) printf("%s: %08x\n", #a, (int)a) P(TCP_FLAG_CWR); P(TCP_FLAG_ECE); P(TCP_FLAG_URG); P(TCP_FLAG_ACK); P(TCP_FLAG_PSH); P(TCP_FLAG_RST); P(TCP_FLAG_SYN); P(TCP_FLAG_FIN); P(TCP_RESERVED_BITS); P(TCP_DATA_OFFSET); #undef P return 0; } Signed-off-by: Paul Pluzhnikov <ppluzhnikov@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-23 17:36:06 +0300