summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-03-07ASoC: rsnd: SRC function parameter uses "mod" instead of "src"Kuninori Morimoto1-12/+9
To reduce confusion, SRC uses "mod" instead of "src" as function parameter Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: SRC sync mode is not related to clock master modeKuninori Morimoto1-7/+0
SRC sync mode needs to control its clock (= for in/out). 1st but codec side clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsnd: don't enable SRC Sync mode when Capture with CMDKuninori Morimoto1-3/+3
It can't use SRC Synchronous convert when Capture if it uses CMD, because no one provide out side clocks. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-07ASoC: rsrc-card: tidyup convert-channels explainKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: add CTU supportKuninori Morimoto1-37/+197
This patch adds CTU (= Channel Transfer Unit) support on Renesas R-Car sound driver. It can Down/Up mixing and splitter. You need to check R-Car datasheet especially CTUn_CPMDR/CTUn_SV0xR/CTUn_SV1xR/CTUn_SV2xR/CTUn_SV3xR for setting parameter. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: add rsnd_runtime_channel_xxx()Kuninori Morimoto8-44/+62
Current SSI is supporting Normal SSI/Multi mode SSI/TDM mode SSI and its behavior is based on input channels. This input channel might be converted by CTU, and SSI needs to be Multi SSI mode / TDM SSI mode if 6ch input EX) 6ch input, CTU for 2ch, playback 6ch 6ch 2ch 2ch 2ch 2ch -> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI EX) 6ch input, no CTU, Multi SSI, playback 6ch 6ch 6ch 6ch 6ch 2ch -> SRC -> CTU -> MIX -> DVC -> SSIU -> SSI0/SSI1/SSI2 Current driver is using rsnd_get_adinr_chan() / rsnd_get_slot_width() for this purpose, but it is complicated enough without meaning. This patch adds new rsnd_runtime_channel_xxx() which is caring CTU/Multi SSI. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: add CTU basic supportKuninori Morimoto2-0/+50
This patch adds Renesas R-Car sound CTU (= Channel Transfer Unit) very basic support, but not yet enough feature at this point. Because CTU support needs more complex channel function for each modules. To avoid complex patch reviewing, this patch picked up very basic part only. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: tidyup rsnd_ssiu_init_gen2()Kuninori Morimoto1-3/+2
remove unnecessary variable Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsrc-card: add convert channels supportKuninori Morimoto2-6/+17
Renesas sound device has CTU (= Channel Transfer Unit), and sound card needs its support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-05ASoC: rsnd: don't call update callback if it was NULLKuninori Morimoto1-1/+1
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: sh: rcar: rsrc-card: don't open code of_device_get_match_data()Wolfram Sang1-3/+2
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: sh: rcar: core: don't open code of_device_get_match_data()Wolfram Sang1-2/+1
This change will also make Coverity happy by avoiding a theoretical NULL pointer dereference; yet another reason is to use the above helper function to tighten the code and make it more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02ASoC: rsnd: rsnd_write() / rsnd_bset() uses regmap _force_ functionKuninori Morimoto2-21/+2
Some R-Car sound requests picky register access which needs *force* register write. Some status register needs to set 1 to clear status, but we might read 1 from its register. In such case, current regmap does nothing and driver will be forever loop To reduce code complexity, this patch uses regmap _force_ function for all register access. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-03-02Merge branch 'topic/update-bits' of ↵Mark Brown10580-186851/+528646
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap into asoc-rcar
2016-02-26regmap: add regmap_fields_force_xxx() macrosKuninori Morimoto2-14/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-26regmap: add regmap_field_force_xxx() macrosKuninori Morimoto1-0/+4
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_fields_update_bits() into macroKuninori Morimoto2-28/+2
This patch merges regmap_fields_update_bits() into macro by using regmap_field_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_fields_write() into macroKuninori Morimoto2-24/+3
This patch merges regmap_fields_write() into macro by using regmap_fields_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: add regmap_fields_update_bits_base()Kuninori Morimoto2-0/+44
This patch adds new regmap_fields_update_bits_base() which is using regmap_update_bits_base(). Current regmap_fields_xxx() can be merged into it by macro. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_field_update_bits() into macroKuninori Morimoto2-22/+2
This patch merges regmap_field_update_bits() into macro by using regmap_field_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_field_write() into macroKuninori Morimoto2-17/+3
This patch merges regmap_field_write() into macro by using regmap_field_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: add regmap_field_update_bits_base()Kuninori Morimoto2-1/+38
This patch adds new regmap_field_update_bits_base() which is using regmap_update_bits_base(). Current regmap_field_xxx() can be merged into it by macro. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_update_bits_check_async() into macroKuninori Morimoto2-50/+2
Current regmap has many similar update functions like below, but the difference is very few. regmap_update_bits() regmap_update_bits_async() regmap_update_bits_check() regmap_update_bits_check_async() Furthermore, we can add *force* write option too in the future. This patch merges regmap_update_bits_check_async() into macro by using regmap_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_update_bits_check() into macroKuninori Morimoto2-37/+2
Current regmap has many similar update functions like below, but the difference is very few. regmap_update_bits() regmap_update_bits_async() regmap_update_bits_check() regmap_update_bits_check_async() Furthermore, we can add *force* write option too in the future. This patch merges regmap_update_bits_check() into macro by using regmap_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_update_bits_async() into macroKuninori Morimoto2-44/+2
Current regmap has many similar update functions like below, but the difference is very few. regmap_update_bits() regmap_update_bits_async() regmap_update_bits_check() regmap_update_bits_check_async() Furthermore, we can add *force* write option too in the future. This patch merges regmap_update_bits_async() into macro by using regmap_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: merge regmap_update_bits() into macroKuninori Morimoto2-32/+3
Current regmap has many similar update functions like below, but the difference is very few. regmap_update_bits() regmap_update_bits_async() regmap_update_bits_check() regmap_update_bits_check_async() Furthermore, we can add *force* write option too in the future. This patch merges regmap_update_bits() into macro by using regmap_update_bits_base(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19regmap: add regmap_update_bits_base()Kuninori Morimoto2-0/+51
Current regmap has many similar update functions like below, but the difference is very few. regmap_update_bits() regmap_update_bits_async() regmap_update_bits_check() regmap_update_bits_check_async() Furthermore, we can add *force* write option too in the future. This patch adds new regmap_update_bits_base() which is feature merged function. Above functions can be merged into it by macro. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: judge work SSI in runtimeKuninori Morimoto1-0/+27
Current rsnd supports multi SSI (maximum 4 SSI for 8ch), and, it should determine whether using each SSI or not in runtime. All SSIs are not used even if there are 4 SSI in case of stereo. Current driver setups un-used SSI in such case. It is no problem, but not needed. This patch judges it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: judge multi SSI in runtimeKuninori Morimoto4-7/+18
Current rsnd supports multi SSI (maximum 4 SSI for 8ch), and, it should determine whether using each SSI or not in runtime. Current judgement is vague, and had broken by c308abe45e2("ASoC: rsnd: rsnd_ssi_is_multi_slave() macro uses rsnd_ssi_multi_slaves()") This patch makes clean it, and solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: move rsnd_ssi_irq() positionKuninori Morimoto1-21/+21
prepare for runtime judging for SSI work Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: Parent SSI attach is not needed if not clock masterKuninori Morimoto1-3/+27
Parent SSI is needed if it is PIN sharing and clock master, otherwise, not needed. But, whether clockk master is judged on .set_fmt, thus, it can't call rsnd_ssi_parent_attach() on .probe. Now, .pcm_new will be called after .set_fmt, so this patch reuses it at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: tidyup SSI init/start sequenceKuninori Morimoto1-20/+16
SSI want to have SSIWSR settings and SSICR settings without EN bit when init, and SSICR EN bit only when start timing. Otherwise, SSI output signal might be unstable. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: add missing .irq callback for DMAKuninori Morimoto1-0/+1
commit b5b442abd9d5 ("ASoC: rsnd: add .irq callback") added .irq callback but SSI DMA is missing it. This patch adds it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: fixup forever loop bug on SSIKuninori Morimoto1-2/+1
commit b5b442abd9 ("ASoC: rsnd: add .irq callback") added .irq support, and it cares both parent SSI and normal SSI. But it should care only normal SSI. Otherwise SSI might be forever loop if SSI is used as both parent SSI and normal SSI (= 2 users), and if under/over run error happen. Because irq disable do nothing in such case. This patch solve this issue. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: SSI function parameter uses "mod" instead of "ssi"Kuninori Morimoto1-9/+10
To reduce confusion, SSI uses "mod" instead of "ssi" as function parameter Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: indicates status failed SSIKuninori Morimoto1-1/+2
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: setup SRC_ROUTE_MODE0 before SRC_SRCIRKuninori Morimoto1-1/+2
SRC_ROUTE_MODE0 determines whether to use SRC. Thus, it should be setup before SRC_SRCIR. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-19ASoC: rsnd: rename RSND_DVC_CHANNELS to RSND_MAX_CHANNELSKuninori Morimoto3-6/+6
The channels number is not only for DVC. Let's rename it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-02-09ASoC: rsnd: rsnd_ssi_is_multi_slave() macro uses rsnd_ssi_multi_slaves()Kuninori Morimoto1-14/+2
b4c83b171 ("ASoC: rsnd: add Multi channel support") added Multi channel support, and current rsnd_ssi_is_multi_slave()'s check method is !SSI equals SSIM1/2/3. But, SSI parent also hit to this macro. Because of this reason, some stream which needs SSI parent clock can't work correctly. This patch uses rsnd_ssi_multi_slaves() to solve this issue. This issue was reported by Dung. Reported-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27ASoC: rsnd: add .irq callbackKuninori Morimoto4-32/+35
Current rsnd driver has .init/.start/.stop/.quit callbacks, and it needs many IPs (SRC/CTU/MUX/DVC/CMD/SSIU/SSI). Because of these relationship, it might get unnecessary error IRQ when start/stop. This patch adds new .irq callback and control IRQ enable/disable timing to avoid it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-27ASoC: rsnd: don't auto-recover when under/over run errorKuninori Morimoto2-107/+29
Renesas R-Car sound needs recovery (= restart) when under/over run error occurred, and current driver tries it on under/over run error handler automatically. But this recovery should be handled by userland, not kernel. This patch stops XRUN when under/over run error occur, and will leave the recovery of HW in userland. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2016-01-25Linux 4.5-rc1v4.5-rc1Linus Torvalds1-2/+2
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds130-676/+4923
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24Merge tag 'platform-drivers-x86-v4.5-2' of ↵Linus Torvalds3-3/+10
git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver updates from Darren Hart: "Emergency travel prevented me from completing my final testing on this until today. Nothing here that couldn't wait until RC1 fixes, but I thought it best to get it out sooner rather than later as it does contain a build warning fix. Summary: A build warning fix, MAINTAINERS cleanup, and a new DMI quirk: ideapad-laptop: - Add Lenovo Yoga 700 to no_hw_rfkill dmi list MAINTAINERS: - Combine multiple telemetry entries intel_telemetry_debugfs: - Fix unused warnings in telemetry debugfs" * tag 'platform-drivers-x86-v4.5-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi list MAINTAINERS: Combine multiple telemetry entries intel_telemetry_debugfs: Fix unused warnings in telemetry debugfs
2016-01-24Merge branch 'next' of ↵Linus Torvalds9-39/+304
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management updates from Zhang Rui: "The top merge commit was re-generated yesterday because two topic branches were dropped from this pull request in the last minute due to some unaddressed comments. All the other material has been in linux-next for quite a while. Specifics: - Enhance thermal core to handle unexpected device cooling states after fresh boot and system resume. From Zhang Rui and Chen Yu. - Several fixes and cleanups on Rockchip and RCAR thermal drivers. From Caesar Wang and Kuninori Morimoto. - Add Broxton support for Intel processor thermal reporting device driver. From Amy Wiles" * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: thermal: trip_point_temp_store() calls thermal_zone_device_update() thermal: rcar: rcar_thermal_get_temp() return error if strange temp thermal: rcar: check irq possibility in rcar_thermal_irq_xxx() thermal: rcar: check every rcar_thermal_update_temp() return value thermal: rcar: move rcar_thermal_dt_ids to upside thermal: rockchip: Support the RK3399 SoCs in thermal driver thermal: rockchip: Support the RK3228 SoCs in thermal driver dt-bindings: rockchip-thermal: Support the RK3228/RK3399 SoCs compatible thermal: rockchip: fix a trivial typo Thermal: Enable Broxton SoC thermal reporting device thermal: constify pch_dev_ops structure Thermal: do thermal zone update after a cooling device registered Thermal: handle thermal zone device properly during system sleep Thermal: initialize thermal zone device correctly
2016-01-24Merge tag 'for-linus-4.5-merge-window' of ↵Linus Torvalds2-43/+47
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p updates from Eric Van Hensbergen: "Sorry for the last minute pull request, there's was a change that didn't get pulled into for-next until two weeks ago and I wanted to give it some bake time. Summary: Rework and error handling fixes, primarily in the fscatch and fd transports" * tag 'for-linus-4.5-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: use fscache mutex rather than spinlock 9p: trans_fd, bail out if recv fcall if missing 9p: trans_fd, read rework to use p9_parse_header net/9p: Add device name details on error
2016-01-24Merge branch 'for-linus' of ↵Linus Torvalds11-240/+501
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull Ceph updates from Sage Weil: "The two main changes are aio support in CephFS, and a series that fixes several issues in the authentication key timeout/renewal code. On top of that are a variety of cleanups and minor bug fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: libceph: remove outdated comment libceph: kill off ceph_x_ticket_handler::validity libceph: invalidate AUTH in addition to a service ticket libceph: fix authorizer invalidation, take 2 libceph: clear messenger auth_retry flag if we fault libceph: fix ceph_msg_revoke() libceph: use list_for_each_entry_safe ceph: use i_size_{read,write} to get/set i_size ceph: re-send AIO write request when getting -EOLDSNAP error ceph: Asynchronous IO support ceph: Avoid to propagate the invalid page point ceph: fix double page_unlock() in page_mkwrite() rbd: delete an unnecessary check before rbd_dev_destroy() libceph: use list_next_entry instead of list_entry_next ceph: ceph_frag_contains_value can be boolean ceph: remove unused functions in ceph_frag.h
2016-01-24Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds16-52/+238
Pull SMB3 fixes from Steve French: "A collection of CIFS/SMB3 fixes. It includes a couple bug fixes, a few for improved debugging of cifs.ko and some improvements to the way cifs does key generation. I do have some additional bug fixes I expect in the next week or two (to address a problem found by xfstest, and some fixes for SMB3.11 dialect, and a couple patches that just came in yesterday that I am reviewing)" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: cifs_dbg() outputs an uninitialized buffer in cifs_readdir() cifs: fix race between call_async() and reconnect() Prepare for encryption support (first part). Add decryption and encryption key generation. Thanks to Metze for helping with this. cifs: Allow using O_DIRECT with cache=loose cifs: Make echo interval tunable cifs: Check uniqueid for SMB2+ and return -ESTALE if necessary Print IP address of unresponsive server cifs: Ratelimit kernel log messages
2016-01-24ideapad-laptop: Add Lenovo Yoga 700 to no_hw_rfkill dmi listJosh Boyer1-0/+7
Like the Yoga 900 models the Lenovo Yoga 700 does not have a hw rfkill switch, and trying to read the hw rfkill switch through the ideapad module causes it to always reported blocking breaking wifi. This commit adds the Lenovo Yoga 700 to the no_hw_rfkill dmi list, fixing the wifi breakage. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1295272 Tested-by: <dinyar.rabady+spam@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
2016-01-24MAINTAINERS: Combine multiple telemetry entriesSouvik Kumar Chakravarty1-3/+1
This patch combines all the telemetry file entries in MAINTAINERS via wildcard. Signed-off-by: Souvik Kumar Chakravarty <souvik.k.chakravarty@intel.com> Signed-off-by: Darren Hart <dvhart@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-22 18:27:11 +0300