summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-06-16Linux 4.9.273v4.9.273Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20210614102642.700712386@linuxfoundation.org Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jason Self <jason@bluehome.net> Link: https://lore.kernel.org/r/20210615060657.351134482@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jason Self <jason@bluehome.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16proc: only require mm_struct for writingLinus Torvalds1-1/+3
commit 94f0b2d4a1d0c52035aef425da5e022bd2cb1c71 upstream. Commit 591a22c14d3f ("proc: Track /proc/$pid/attr/ opener mm_struct") we started using __mem_open() to track the mm_struct at open-time, so that we could then check it for writes. But that also ended up making the permission checks at open time much stricter - and not just for writes, but for reads too. And that in turn caused a regression for at least Fedora 29, where NIC interfaces fail to start when using NetworkManager. Since only the write side wanted the mm_struct test, ignore any failures by __mem_open() at open time, leaving reads unaffected. The write() time verification of the mm_struct pointer will then catch the failure case because a NULL pointer will not match a valid 'current->mm'. Link: https://lore.kernel.org/netdev/YMjTlp2FSJYvoyFa@unreal/ Fixes: 591a22c14d3f ("proc: Track /proc/$pid/attr/ opener mm_struct") Reported-and-tested-by: Leon Romanovsky <leon@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Christian Brauner <christian.brauner@ubuntu.com> Cc: Andrea Righi <andrea.righi@canonical.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16tracing: Correct the length check which causes memory corruptionLiangyan1-1/+1
commit 3e08a9f9760f4a70d633c328a76408e62d6f80a3 upstream. We've suffered from severe kernel crashes due to memory corruption on our production environment, like, Call Trace: [1640542.554277] general protection fault: 0000 [#1] SMP PTI [1640542.554856] CPU: 17 PID: 26996 Comm: python Kdump: loaded Tainted:G [1640542.556629] RIP: 0010:kmem_cache_alloc+0x90/0x190 [1640542.559074] RSP: 0018:ffffb16faa597df8 EFLAGS: 00010286 [1640542.559587] RAX: 0000000000000000 RBX: 0000000000400200 RCX: 0000000006e931bf [1640542.560323] RDX: 0000000006e931be RSI: 0000000000400200 RDI: ffff9a45ff004300 [1640542.560996] RBP: 0000000000400200 R08: 0000000000023420 R09: 0000000000000000 [1640542.561670] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffff9a20608d [1640542.562366] R13: ffff9a45ff004300 R14: ffff9a45ff004300 R15: 696c662f65636976 [1640542.563128] FS: 00007f45d7c6f740(0000) GS:ffff9a45ff840000(0000) knlGS:0000000000000000 [1640542.563937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1640542.564557] CR2: 00007f45d71311a0 CR3: 000000189d63e004 CR4: 00000000003606e0 [1640542.565279] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1640542.566069] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1640542.566742] Call Trace: [1640542.567009] anon_vma_clone+0x5d/0x170 [1640542.567417] __split_vma+0x91/0x1a0 [1640542.567777] do_munmap+0x2c6/0x320 [1640542.568128] vm_munmap+0x54/0x70 [1640542.569990] __x64_sys_munmap+0x22/0x30 [1640542.572005] do_syscall_64+0x5b/0x1b0 [1640542.573724] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [1640542.575642] RIP: 0033:0x7f45d6e61e27 James Wang has reproduced it stably on the latest 4.19 LTS. After some debugging, we finally proved that it's due to ftrace buffer out-of-bound access using a debug tool as follows: [ 86.775200] BUG: Out-of-bounds write at addr 0xffff88aefe8b7000 [ 86.780806] no_context+0xdf/0x3c0 [ 86.784327] __do_page_fault+0x252/0x470 [ 86.788367] do_page_fault+0x32/0x140 [ 86.792145] page_fault+0x1e/0x30 [ 86.795576] strncpy_from_unsafe+0x66/0xb0 [ 86.799789] fetch_memory_string+0x25/0x40 [ 86.804002] fetch_deref_string+0x51/0x60 [ 86.808134] kprobe_trace_func+0x32d/0x3a0 [ 86.812347] kprobe_dispatcher+0x45/0x50 [ 86.816385] kprobe_ftrace_handler+0x90/0xf0 [ 86.820779] ftrace_ops_assist_func+0xa1/0x140 [ 86.825340] 0xffffffffc00750bf [ 86.828603] do_sys_open+0x5/0x1f0 [ 86.832124] do_syscall_64+0x5b/0x1b0 [ 86.835900] entry_SYSCALL_64_after_hwframe+0x44/0xa9 commit b220c049d519 ("tracing: Check length before giving out the filter buffer") adds length check to protect trace data overflow introduced in 0fc1b09ff1ff, seems that this fix can't prevent overflow entirely, the length check should also take the sizeof entry->array[0] into account, since this array[0] is filled the length of trace data and occupy addtional space and risk overflow. Link: https://lkml.kernel.org/r/20210607125734.1770447-1-liangyan.peng@linux.alibaba.com Cc: stable@vger.kernel.org Cc: Ingo Molnar <mingo@redhat.com> Cc: Xunlei Pang <xlpang@linux.alibaba.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Fixes: b220c049d519 ("tracing: Check length before giving out the filter buffer") Reviewed-by: Xunlei Pang <xlpang@linux.alibaba.com> Reviewed-by: yinbinbin <yinbinbin@alibabacloud.com> Reviewed-by: Wetp Zhang <wetp.zy@linux.alibaba.com> Tested-by: James Wang <jnwang@linux.alibaba.com> Signed-off-by: Liangyan <liangyan.peng@linux.alibaba.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16ftrace: Do not blindly read the ip address in ftrace_bug()Steven Rostedt (VMware)1-1/+7
commit 6c14133d2d3f768e0a35128faac8aa6ed4815051 upstream. It was reported that a bug on arm64 caused a bad ip address to be used for updating into a nop in ftrace_init(), but the error path (rightfully) returned -EINVAL and not -EFAULT, as the bug caused more than one error to occur. But because -EINVAL was returned, the ftrace_bug() tried to report what was at the location of the ip address, and read it directly. This caused the machine to panic, as the ip was not pointing to a valid memory address. Instead, read the ip address with copy_from_kernel_nofault() to safely access the memory, and if it faults, report that the address faulted, otherwise report what was in that location. Link: https://lore.kernel.org/lkml/20210607032329.28671-1-mark-pk.tsai@mediatek.com/ Cc: stable@vger.kernel.org Fixes: 05736a427f7e1 ("ftrace: warn on failure to disable mcount callers") Reported-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16scsi: core: Only put parent device if host state differs from SHOST_CREATEDMing Lei1-1/+1
commit 1e0d4e6225996f05271de1ebcb1a7c9381af0b27 upstream. get_device(shost->shost_gendev.parent) is called after host state has switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the parent device if host state is still SHOST_CREATED. Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com Cc: Bart Van Assche <bvanassche@acm.org> Cc: John Garry <john.garry@huawei.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: John Garry <john.garry@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16scsi: core: Fix error handling of scsi_host_alloc()Ming Lei1-10/+13
commit 66a834d092930cf41d809c0e989b13cd6f9ca006 upstream. After device is initialized via device_initialize(), or its name is set via dev_set_name(), the device has to be freed via put_device(). Otherwise device name will be leaked because it is allocated dynamically in dev_set_name(). Fix the leak by replacing kfree() with put_device(). Since scsi_host_dev_release() properly handles IDA and kthread removal, remove special-casing these from the error handling as well. Link: https://lore.kernel.org/r/20210602133029.2864069-2-ming.lei@redhat.com Cc: Bart Van Assche <bvanassche@acm.org> Cc: John Garry <john.garry@huawei.com> Cc: Hannes Reinecke <hare@suse.de> Tested-by: John Garry <john.garry@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.Dai Ngo1-0/+8
commit f8849e206ef52b584cd9227255f4724f0cc900bb upstream. Currently if __nfs4_proc_set_acl fails with NFS4ERR_BADOWNER it re-enables the idmapper by clearing NFS_CAP_UIDGID_NOMAP before retrying again. The NFS_CAP_UIDGID_NOMAP remains cleared even if the retry fails. This causes problem for subsequent setattr requests for v4 server that does not have idmapping configured. This patch modifies nfs4_proc_set_acl to detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skips the retry, since the kernel isn't involved in encoding the ACEs, and return -EINVAL. Steps to reproduce the problem: # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt # touch /tmp/mnt/file1 # chown 99 /tmp/mnt/file1 # nfs4_setfacl -a A::unknown.user@xyz.com:wrtncy /tmp/mnt/file1 Failed setxattr operation: Invalid argument # chown 99 /tmp/mnt/file1 chown: changing ownership of ‘/tmp/mnt/file1’: Invalid argument # umount /tmp/mnt # mount -o vers=4.1,sec=sys server:/export/test /tmp/mnt # chown 99 /tmp/mnt/file1 # v2: detect NFS4ERR_BADOWNER and NFS4ERR_BADNAME and skip retry in nfs4_proc_set_acl. Signed-off-by: Dai Ngo <dai.ngo@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16kvm: fix previous commit for 32-bit buildsPaolo Bonzini1-2/+2
commit 4422829e8053068e0225e4d0ef42dc41ea7c9ef5 upstream. array_index_nospec does not work for uint64_t on 32-bit builds. However, the size of a memory slot must be less than 20 bits wide on those system, since the memory slot must fit in the user address space. So just store it in an unsigned long. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16perf session: Correct buffer copying when peeking eventsLeo Yan1-0/+1
[ Upstream commit 197eecb6ecae0b04bd694432f640ff75597fed9c ] When peeking an event, it has a short path and a long path. The short path uses the session pointer "one_mmap_addr" to directly fetch the event; and the long path needs to read out the event header and the following event data from file and fill into the buffer pointer passed through the argument "buf". The issue is in the long path that it copies the event header and event data into the same destination address which pointer "buf", this means the event header is overwritten. We are just lucky to run into the short path in most cases, so we don't hit the issue in the long path. This patch adds the offset "hdr_sz" to the pointer "buf" when copying the event data, so that it can reserve the event header which can be used properly by its caller. Fixes: 5a52f33adf02 ("perf session: Add perf_session__peek_event()") Signed-off-by: Leo Yan <leo.yan@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210605052957.1070720-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16NFS: Fix a potential NULL dereference in nfs_get_client()Dan Carpenter1-1/+1
[ Upstream commit 09226e8303beeec10f2ff844d2e46d1371dc58e0 ] None of the callers are expecting NULL returns from nfs_get_client() so this code will lead to an Oops. It's better to return an error pointer. I expect that this is dead code so hopefully no one is affected. Fixes: 31434f496abb ("nfs: check hostname in nfs_get_client") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16perf: Fix data race between pin_count increment/decrementMarco Elver1-0/+2
commit 6c605f8371159432ec61cbb1488dcf7ad24ad19a upstream. KCSAN reports a data race between increment and decrement of pin_count: write to 0xffff888237c2d4e0 of 4 bytes by task 15740 on cpu 1: find_get_context kernel/events/core.c:4617 __do_sys_perf_event_open kernel/events/core.c:12097 [inline] __se_sys_perf_event_open kernel/events/core.c:11933 ... read to 0xffff888237c2d4e0 of 4 bytes by task 15743 on cpu 0: perf_unpin_context kernel/events/core.c:1525 [inline] __do_sys_perf_event_open kernel/events/core.c:12328 [inline] __se_sys_perf_event_open kernel/events/core.c:11933 ... Because neither read-modify-write here is atomic, this can lead to one of the operations being lost, resulting in an inconsistent pin_count. Fix it by adding the missing locking in the CPU-event case. Fixes: fe4b04fa31a6 ("perf: Cure task_oncpu_function_call() races") Reported-by: syzbot+142c9018f5962db69c7e@syzkaller.appspotmail.com Signed-off-by: Marco Elver <elver@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20210527104711.2671610-1-elver@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16usb: fix various gadget panics on 10gbps cablingMaciej Żenczykowski1-0/+8
commit 032e288097a553db5653af552dd8035cd2a0ba96 upstream. usb_assign_descriptors() is called with 5 parameters, the last 4 of which are the usb_descriptor_header for: full-speed (USB1.1 - 12Mbps [including USB1.0 low-speed @ 1.5Mbps), high-speed (USB2.0 - 480Mbps), super-speed (USB3.0 - 5Gbps), super-speed-plus (USB3.1 - 10Gbps). The differences between full/high/super-speed descriptors are usually substantial (due to changes in the maximum usb block size from 64 to 512 to 1024 bytes and other differences in the specs), while the difference between 5 and 10Gbps descriptors may be as little as nothing (in many cases the same tuning is simply good enough). However if a gadget driver calls usb_assign_descriptors() with a NULL descriptor for super-speed-plus and is then used on a max 10gbps configuration, the kernel will crash with a null pointer dereference, when a 10gbps capable device port + cable + host port combination shows up. (This wouldn't happen if the gadget max-speed was set to 5gbps, but it of course defaults to the maximum, and there's no real reason to artificially limit it) The fix is to simply use the 5gbps descriptor as the 10gbps descriptor, if a 10gbps descriptor wasn't provided. Obviously this won't fix the problem if the 5gbps descriptor is also NULL, but such cases can't be so trivially solved (and any such gadgets are unlikely to be used with USB3 ports any way). Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210609024459.1126080-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16usb: fix various gadgets null ptr deref on 10gbps cabling.Maciej Żenczykowski9-9/+12
commit 90c4d05780d47e14a50e11a7f17373104cd47d25 upstream. This avoids a null pointer dereference in f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm} by simply reusing the 5gbps config for 10gbps. Fixes: eaef50c76057 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus") Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Cc: Felipe Balbi <balbi@kernel.org> Cc: Gustavo A. R. Silva <gustavoars@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Michael R Sweet <msweet@msweet.org> Cc: Mike Christie <michael.christie@oracle.com> Cc: Pawel Laszczak <pawell@cadence.com> Cc: Peter Chen <peter.chen@nxp.com> Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com> Cc: Wei Ming Chen <jj251510319013@gmail.com> Cc: Will McVicker <willmcvicker@google.com> Cc: Zqiang <qiang.zhang@windriver.com> Reviewed-By: Lorenzo Colitti <lorenzo@google.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16usb: gadget: eem: fix wrong eem header operationLinyu Yuan1-2/+2
commit 305f670846a31a261462577dd0b967c4fa796871 upstream. when skb_clone() or skb_copy_expand() fail, it should pull skb with lengh indicated by header, or not it will read network data and check it as header. Cc: <stable@vger.kernel.org> Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com> Link: https://lore.kernel.org/r/20210608233547.3767-1-linyyuan@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16USB: serial: quatech2: fix control-request directionsJohan Hovold1-3/+3
commit eb8dbe80326c3d44c1e38ee4f40e0d8d3e06f2d0 upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Fix the three requests which erroneously used usb_rcvctrlpipe(). Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable@vger.kernel.org # 3.5 Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16USB: serial: omninet: add device id for Zyxel Omni 56K PlusAlexandre GRIVEAUX1-0/+2
commit fc0b3dc9a11771c3919eaaaf9d649138b095aa0f upstream. Add device id for Zyxel Omni 56K Plus modem, this modem include: USB chip: NetChip NET2888 Main chip: 901041A F721501APGF Another modem using the same chips is the Zyxel Omni 56K DUO/NEO, could be added with the right USB ID. Signed-off-by: Alexandre GRIVEAUX <agriveaux@deutnet.info> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16USB: serial: ftdi_sio: add NovaTech OrionMX product IDGeorge McCollister2-0/+2
commit bc96c72df33ee81b24d87eab953c73f7bcc04f29 upstream. Add PID for the NovaTech OrionMX so it can be automatically detected. Signed-off-by: George McCollister <george.mccollister@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16usb: dwc3: ep0: fix NULL pointer exceptionMarian-Cristian Rotariu1-0/+3
commit d00889080ab60051627dab1d85831cd9db750e2a upstream. There is no validation of the index from dwc3_wIndex_to_dep() and we might be referring a non-existing ep and trigger a NULL pointer exception. In certain configurations we might use fewer eps and the index might wrongly indicate a larger ep index than existing. By adding this validation from the patch we can actually report a wrong index back to the caller. In our usecase we are using a composite device on an older kernel, but upstream might use this fix also. Unfortunately, I cannot describe the hardware for others to reproduce the issue as it is a proprietary implementation. [ 82.958261] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a4 [ 82.966891] Mem abort info: [ 82.969663] ESR = 0x96000006 [ 82.972703] Exception class = DABT (current EL), IL = 32 bits [ 82.978603] SET = 0, FnV = 0 [ 82.981642] EA = 0, S1PTW = 0 [ 82.984765] Data abort info: [ 82.987631] ISV = 0, ISS = 0x00000006 [ 82.991449] CM = 0, WnR = 0 [ 82.994409] user pgtable: 4k pages, 39-bit VAs, pgdp = 00000000c6210ccc [ 83.000999] [00000000000000a4] pgd=0000000053aa5003, pud=0000000053aa5003, pmd=0000000000000000 [ 83.009685] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 83.026433] Process irq/62-dwc3 (pid: 303, stack limit = 0x000000003985154c) [ 83.033470] CPU: 0 PID: 303 Comm: irq/62-dwc3 Not tainted 4.19.124 #1 [ 83.044836] pstate: 60000085 (nZCv daIf -PAN -UAO) [ 83.049628] pc : dwc3_ep0_handle_feature+0x414/0x43c [ 83.054558] lr : dwc3_ep0_interrupt+0x3b4/0xc94 ... [ 83.141788] Call trace: [ 83.144227] dwc3_ep0_handle_feature+0x414/0x43c [ 83.148823] dwc3_ep0_interrupt+0x3b4/0xc94 [ 83.181546] ---[ end trace aac6b5267d84c32f ]--- Signed-off-by: Marian-Cristian Rotariu <marian.c.rotariu@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210608162650.58426-1-marian.c.rotariu@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16USB: f_ncm: ncm_bitrate (speed) is unsignedMaciej Żenczykowski1-1/+1
commit 3370139745853f7826895293e8ac3aec1430508e upstream. [ 190.544755] configfs-gadget gadget: notify speed -44967296 This is because 4250000000 - 2**32 is -44967296. Fixes: 9f6ce4240a2b ("usb: gadget: f_ncm.c added") Cc: Brooke Basile <brookebasile@gmail.com> Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com> Cc: Linux USB Mailing List <linux-usb@vger.kernel.org> Acked-By: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16cgroup1: don't allow '\n' in renamingAlexander Kuznetsov1-0/+4
commit b7e24eb1caa5f8da20d405d262dba67943aedc42 upstream. cgroup_mkdir() have restriction on newline usage in names: $ mkdir $'/sys/fs/cgroup/cpu/test\ntest2' mkdir: cannot create directory '/sys/fs/cgroup/cpu/test\ntest2': Invalid argument But in cgroup1_rename() such check is missed. This allows us to make /proc/<pid>/cgroup unparsable: $ mkdir /sys/fs/cgroup/cpu/test $ mv /sys/fs/cgroup/cpu/test $'/sys/fs/cgroup/cpu/test\ntest2' $ echo $$ > $'/sys/fs/cgroup/cpu/test\ntest2' $ cat /proc/self/cgroup 11:pids:/ 10:freezer:/ 9:hugetlb:/ 8:cpuset:/ 7:blkio:/user.slice 6:memory:/user.slice 5:net_cls,net_prio:/ 4:perf_event:/ 3:devices:/user.slice 2:cpu,cpuacct:/test test2 1:name=systemd:/ 0::/ Signed-off-by: Alexander Kuznetsov <wwfq@yandex-team.ru> Reported-by: Andrey Krasichkov <buglloc@yandex-team.ru> Acked-by: Dmitry Yakunin <zeil@yandex-team.ru> Cc: stable@vger.kernel.org Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16btrfs: return value from btrfs_mark_extent_written() in case of errorRitesh Harjani1-2/+2
commit e7b2ec3d3d4ebeb4cff7ae45cf430182fa6a49fb upstream. We always return 0 even in case of an error in btrfs_mark_extent_written(). Fix it to return proper error value in case of a failure. All callers handle it. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16kvm: avoid speculation-based attacks from out-of-range memslot accessesPaolo Bonzini1-1/+10
commit da27a83fd6cc7780fea190e1f5c19e87019da65c upstream. KVM's mechanism for accessing guest memory translates a guest physical address (gpa) to a host virtual address using the right-shifted gpa (also known as gfn) and a struct kvm_memory_slot. The translation is performed in __gfn_to_hva_memslot using the following formula: hva = slot->userspace_addr + (gfn - slot->base_gfn) * PAGE_SIZE It is expected that gfn falls within the boundaries of the guest's physical memory. However, a guest can access invalid physical addresses in such a way that the gfn is invalid. __gfn_to_hva_memslot is called from kvm_vcpu_gfn_to_hva_prot, which first retrieves a memslot through __gfn_to_memslot. While __gfn_to_memslot does check that the gfn falls within the boundaries of the guest's physical memory or not, a CPU can speculate the result of the check and continue execution speculatively using an illegal gfn. The speculation can result in calculating an out-of-bounds hva. If the resulting host virtual address is used to load another guest physical address, this is effectively a Spectre gadget consisting of two consecutive reads, the second of which is data dependent on the first. Right now it's not clear if there are any cases in which this is exploitable. One interesting case was reported by the original author of this patch, and involves visiting guest page tables on x86. Right now these are not vulnerable because the hva read goes through get_user(), which contains an LFENCE speculation barrier. However, there are patches in progress for x86 uaccess.h to mask kernel addresses instead of using LFENCE; once these land, a guest could use speculation to read from the VMM's ring 3 address space. Other architectures such as ARM already use the address masking method, and would be susceptible to this same kind of data-dependent access gadgets. Therefore, this patch proactively protects from these attacks by masking out-of-bounds gfns in __gfn_to_hva_memslot, which blocks speculation of invalid hvas. Sean Christopherson noted that this patch does not cover kvm_read_guest_offset_cached. This however is limited to a few bytes past the end of the cache, and therefore it is unlikely to be useful in the context of building a chain of data dependent accesses. Reported-by: Artemiy Margaritov <artemiy.margaritov@gmail.com> Co-developed-by: Artemiy Margaritov <artemiy.margaritov@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16drm: Lock pointer access in drm_master_release()Desmond Cheong Zhi Xi1-1/+2
commit c336a5ee984708db4826ef9e47d184e638e29717 upstream. This patch eliminates the following smatch warning: drivers/gpu/drm/drm_auth.c:320 drm_master_release() warn: unlocked access 'master' (line 318) expected lock '&dev->master_mutex' The 'file_priv->master' field should be protected by the mutex lock to '&dev->master_mutex'. This is because other processes can concurrently modify this field and free the current 'file_priv->master' pointer. This could result in a use-after-free error when 'master' is dereferenced in subsequent function calls to 'drm_legacy_lock_master_cleanup()' or to 'drm_lease_revoke()'. An example of a scenario that would produce this error can be seen from a similar bug in 'drm_getunique()' that was reported by Syzbot: https://syzkaller.appspot.com/bug?id=148d2f1dfac64af52ffd27b661981a540724f803 In the Syzbot report, another process concurrently acquired the device's master mutex in 'drm_setmaster_ioctl()', then overwrote 'fpriv->master' in 'drm_new_set_master()'. The old value of 'fpriv->master' was subsequently freed before the mutex was unlocked. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210609092119.173590-1-desmondcheongzx@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16i2c: mpc: implement erratum A-004447 workaroundChris Packham1-1/+78
[ Upstream commit 8f0cdec8b5fd94135d643662506ee94ae9e98785 ] The P2040/P2041 has an erratum where the normal i2c recovery mechanism does not work. Implement the alternative recovery mechanism documented in the P2040 Chip Errata Rev Q. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16i2c: mpc: Make use of i2c_recover_bus()Chris Packham1-2/+16
[ Upstream commit 65171b2df15eb7545431d75c2729b5062da89b43 ] Move the existing calls of mpc_i2c_fixup() to a recovery function registered via bus_recovery_info. This makes it more obvious that recovery is supported and allows for a future where recovery is triggered by the i2c core. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllersChris Packham1-0/+8
[ Upstream commit 19ae697a1e4edf1d755b413e3aa38da65e2db23b ] The i2c controllers on the P1010 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P1010 Chip Errata Rev L. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllersChris Packham1-0/+16
[ Upstream commit 7adc7b225cddcfd0f346d10144fd7a3d3d9f9ea7 ] The i2c controllers on the P2040/P2041 have an erratum where the documented scheme for i2c bus recovery will not work (A-004447). A different mechanism is needed which is documented in the P2040 Chip Errata Rev Q (latest available at the time of writing). Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Wolfram Sang <wsa@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16bnx2x: Fix missing error code in bnx2x_iov_init_one()Jiapeng Chong1-1/+3
[ Upstream commit 65161c35554f7135e6656b3df1ce2c500ca0bdcf ] Eliminate the follow smatch warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16MIPS: Fix kernel hang under FUNCTION_GRAPH_TRACER and PREEMPT_TRACERTiezhu Yang1-6/+6
[ Upstream commit 78cf0eb926cb1abeff2106bae67752e032fe5f3e ] When update the latest mainline kernel with the following three configs, the kernel hangs during startup: (1) CONFIG_FUNCTION_GRAPH_TRACER=y (2) CONFIG_PREEMPT_TRACER=y (3) CONFIG_FTRACE_STARTUP_TEST=y When update the latest mainline kernel with the above two configs (1) and (2), the kernel starts normally, but it still hangs when execute the following command: echo "function_graph" > /sys/kernel/debug/tracing/current_tracer Without CONFIG_PREEMPT_TRACER=y, the above two kinds of kernel hangs disappeared, so it seems that CONFIG_PREEMPT_TRACER has some influences with function_graph tracer at the first glance. I use ejtag to find out the epc address is related with preempt_enable() in the file arch/mips/lib/mips-atomic.c, because function tracing can trace the preempt_{enable,disable} calls that are traced, replace them with preempt_{enable,disable}_notrace to prevent function tracing from going into an infinite loop, and then it can fix the kernel hang issue. By the way, it seems that this commit is a complement and improvement of commit f93a1a00f2bd ("MIPS: Fix crash that occurs when function tracing is enabled"). Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16net: appletalk: cops: Fix data race in cops_probe1Saubhik Mukherjee1-2/+2
[ Upstream commit a4dd4fc6105e54393d637450a11d4cddb5fabc4f ] In cops_probe1(), there is a write to dev->base_addr after requesting an interrupt line and registering the interrupt handler cops_interrupt(). The handler might be called in parallel to handle an interrupt. cops_interrupt() tries to read dev->base_addr leading to a potential data race. So write to dev->base_addr before calling request_irq(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Saubhik Mukherjee <saubhik.mukherjee@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16net: macb: ensure the device is available before accessing GEMGXL control ↵Zong Li1-0/+3
registers [ Upstream commit 5eff1461a6dec84f04fafa9128548bad51d96147 ] If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16scsi: target: qla2xxx: Wait for stop_phase1 at WWN removalDmitry Bogdanov1-0/+2
[ Upstream commit 2ef7665dfd88830f15415ba007c7c9a46be7acd8 ] Target de-configuration panics at high CPU load because TPGT and WWPN can be removed on separate threads. TPGT removal requests a reset HBA on a separate thread and waits for reset complete (phase1). Due to high CPU load that HBA reset can be delayed for some time. WWPN removal does qlt_stop_phase2(). There it is believed that phase1 has already completed and thus tgt.tgt_ops is subsequently cleared. However, tgt.tgt_ops is needed to process incoming traffic and therefore this will cause one of the following panics: NIP qlt_reset+0x7c/0x220 [qla2xxx] LR qlt_reset+0x68/0x220 [qla2xxx] Call Trace: 0xc000003ffff63a78 (unreliable) qlt_handle_imm_notify+0x800/0x10c0 [qla2xxx] qlt_24xx_atio_pkt+0x208/0x590 [qla2xxx] qlt_24xx_process_atio_queue+0x33c/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx] or NIP qlt_24xx_handle_abts+0xd0/0x2a0 [qla2xxx] LR qlt_24xx_handle_abts+0xb4/0x2a0 [qla2xxx] Call Trace: qlt_24xx_handle_abts+0x90/0x2a0 [qla2xxx] (unreliable) qlt_24xx_process_atio_queue+0x500/0x7a0 [qla2xxx] qla83xx_msix_atio_q+0x54/0x90 [qla2xxx] or NIP qlt_create_sess+0x90/0x4e0 [qla2xxx] LR qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] Call Trace: 0xc0000000348fba30 (unreliable) qla24xx_do_nack_work+0xa8/0x180 [qla2xxx] qla2x00_do_work+0x674/0xbf0 [qla2xxx] qla2x00_iocb_work_fn The patch fixes the issue by serializing qlt_stop_phase1() and qlt_stop_phase2() functions to make WWPN removal wait for phase1 completion. Link: https://lore.kernel.org/r/20210415203554.27890-1-d.bogdanov@yadro.com Reviewed-by: Roman Bolshakov <r.bolshakov@yadro.com> Signed-off-by: Dmitry Bogdanov <d.bogdanov@yadro.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16scsi: vmw_pvscsi: Set correct residual data lengthMatt Wang1-1/+7
[ Upstream commit e662502b3a782d479e67736a5a1c169a703d853a ] Some commands (such as INQUIRY) may return less data than the initiator requested. To avoid conducting useless information, set the right residual count to make upper layer aware of this. Before (INQUIRY PAGE 0xB0 with 128B buffer): $ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good Received 128 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 40 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 50 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 70 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ After: $ sg_raw -r 128 /dev/sda 12 01 B0 00 80 00 SCSI Status: Good Received 64 bytes of data: 00 00 b0 00 3c 01 00 00 00 00 00 00 00 00 00 00 00 ...<............ 10 00 00 00 00 00 01 00 00 00 00 00 40 00 00 08 00 ...........@.... 20 80 00 00 00 00 00 00 00 00 00 20 00 00 00 00 00 .......... ..... 30 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ [mkp: clarified description] Link: https://lore.kernel.org/r/03C41093-B62E-43A2-913E-CFC92F1C70C3@vmware.com Signed-off-by: Matt Wang <wwentao@vmware.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16net/qla3xxx: fix schedule while atomic in ql_sem_spinlockZheyu Ma1-1/+1
[ Upstream commit 13a6f3153922391e90036ba2267d34eed63196fc ] When calling the 'ql_sem_spinlock', the driver has already acquired the spin lock, so the driver should not call 'ssleep' in atomic context. This bug can be fixed by using 'mdelay' instead of 'ssleep'. The KASAN's log reveals it: [ 3.238124 ] BUG: scheduling while atomic: swapper/0/1/0x00000002 [ 3.238748 ] 2 locks held by swapper/0/1: [ 3.239151 ] #0: ffff88810177b240 (&dev->mutex){....}-{3:3}, at: __device_driver_lock+0x41/0x60 [ 3.240026 ] #1: ffff888107c60e28 (&qdev->hw_lock){....}-{2:2}, at: ql3xxx_probe+0x2aa/0xea0 [ 3.240873 ] Modules linked in: [ 3.241187 ] irq event stamp: 460854 [ 3.241541 ] hardirqs last enabled at (460853): [<ffffffff843051bf>] _raw_spin_unlock_irqrestore+0x4f/0x70 [ 3.242245 ] hardirqs last disabled at (460854): [<ffffffff843058ca>] _raw_spin_lock_irqsave+0x2a/0x70 [ 3.242245 ] softirqs last enabled at (446076): [<ffffffff846002e4>] __do_softirq+0x2e4/0x4b1 [ 3.242245 ] softirqs last disabled at (446069): [<ffffffff811ba5e0>] irq_exit_rcu+0x100/0x110 [ 3.242245 ] Preemption disabled at: [ 3.242245 ] [<ffffffff828ca5ba>] ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] Kernel panic - not syncing: scheduling while atomic [ 3.242245 ] CPU: 2 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00145 -gee7dc339169-dirty #16 [ 3.242245 ] Call Trace: [ 3.242245 ] dump_stack+0xba/0xf5 [ 3.242245 ] ? ql3xxx_probe+0x1f0/0xea0 [ 3.242245 ] panic+0x15a/0x3f2 [ 3.242245 ] ? vprintk+0x76/0x150 [ 3.242245 ] ? ql3xxx_probe+0x2aa/0xea0 [ 3.242245 ] __schedule_bug+0xae/0xe0 [ 3.242245 ] __schedule+0x72e/0xa00 [ 3.242245 ] schedule+0x43/0xf0 [ 3.242245 ] schedule_timeout+0x28b/0x500 [ 3.242245 ] ? del_timer_sync+0xf0/0xf0 [ 3.242245 ] ? msleep+0x2f/0x70 [ 3.242245 ] msleep+0x59/0x70 [ 3.242245 ] ql3xxx_probe+0x307/0xea0 [ 3.242245 ] ? _raw_spin_unlock_irqrestore+0x3a/0x70 [ 3.242245 ] ? pci_device_remove+0x110/0x110 [ 3.242245 ] local_pci_probe+0x45/0xa0 [ 3.242245 ] pci_device_probe+0x12b/0x1d0 [ 3.242245 ] really_probe+0x2a9/0x610 [ 3.242245 ] driver_probe_device+0x90/0x1d0 [ 3.242245 ] ? mutex_lock_nested+0x1b/0x20 [ 3.242245 ] device_driver_attach+0x68/0x70 [ 3.242245 ] __driver_attach+0x124/0x1b0 [ 3.242245 ] ? device_driver_attach+0x70/0x70 [ 3.242245 ] bus_for_each_dev+0xbb/0x110 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] driver_attach+0x27/0x30 [ 3.242245 ] bus_add_driver+0x1eb/0x2a0 [ 3.242245 ] driver_register+0xa9/0x180 [ 3.242245 ] __pci_register_driver+0x82/0x90 [ 3.242245 ] ? yellowfin_init+0x25/0x25 [ 3.242245 ] ql3xxx_driver_init+0x23/0x25 [ 3.242245 ] do_one_initcall+0x7f/0x3d0 [ 3.242245 ] ? rdinit_setup+0x45/0x45 [ 3.242245 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.242245 ] kernel_init_freeable+0x2aa/0x301 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] kernel_init+0x18/0x190 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ? rest_init+0x2c0/0x2c0 [ 3.242245 ] ret_from_fork+0x1f/0x30 [ 3.242245 ] Dumping ftrace buffer: [ 3.242245 ] (ftrace buffer empty) [ 3.242245 ] Kernel Offset: disabled [ 3.242245 ] Rebooting in 1 seconds. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16wq: handle VM suspension in stall detectionSergey Senozhatsky1-2/+10
[ Upstream commit 940d71c6462e8151c78f28e4919aa8882ff2054e ] If VCPU is suspended (VM suspend) in wq_watchdog_timer_fn() then once this VCPU resumes it will see the new jiffies value, while it may take a while before IRQ detects PVCLOCK_GUEST_STOPPED on this VCPU and updates all the watchdogs via pvclock_touch_watchdogs(). There is a small chance of misreported WQ stalls in the meantime, because new jiffies is time_after() old 'ts + thresh'. wq_watchdog_timer_fn() { for_each_pool(pool, pi) { if (time_after(jiffies, ts + thresh)) { pr_emerg("BUG: workqueue lockup - pool"); } } } Save jiffies at the beginning of this function and use that value for stall detection. If VM gets suspended then we continue using "old" jiffies value and old WQ touch timestamps. If IRQ at some point restarts the stall detection cycle (pvclock_touch_watchdogs()) then old jiffies will always be before new 'ts + thresh'. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16cgroup: disable controllers at parse timeShakeel Butt1-8/+5
[ Upstream commit 45e1ba40837ac2f6f4d4716bddb8d44bd7e4a251 ] This patch effectively reverts the commit a3e72739b7a7 ("cgroup: fix too early usage of static_branch_disable()"). The commit 6041186a3258 ("init: initialize jump labels before command line option parsing") has moved the jump_label_init() before parse_args() which has made the commit a3e72739b7a7 unnecessary. On the other hand there are consequences of disabling the controllers later as there are subsystems doing the controller checks for different decisions. One such incident is reported [1] regarding the memory controller and its impact on memory reclaim code. [1] https://lore.kernel.org/linux-mm/921e53f3-4b13-aab8-4a9e-e83ff15371e4@nec.com Signed-off-by: Shakeel Butt <shakeelb@google.com> Reported-by: NOMURA JUNICHI(野村　淳一) <junichi.nomura@nec.com> Signed-off-by: Tejun Heo <tj@kernel.org> Tested-by: Jun'ichi Nomura <junichi.nomura@nec.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16net: mdiobus: get rid of a BUG_ON()Dan Carpenter1-1/+2
[ Upstream commit 1dde47a66d4fb181830d6fa000e5ea86907b639e ] We spotted a bug recently during a review where a driver was unregistering a bus that wasn't registered, which would trigger this BUG_ON(). Let's handle that situation more gracefully, and just print a warning and return. Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16netlink: disable IRQs for netlink_lock_table()Johannes Berg1-2/+4
[ Upstream commit 1d482e666b8e74c7555dbdfbfb77205eeed3ff2d ] Syzbot reports that in mac80211 we have a potential deadlock between our "local->stop_queue_reasons_lock" (spinlock) and netlink's nl_table_lock (rwlock). This is because there's at least one situation in which we might try to send a netlink message with this spinlock held while it is also possible to take the spinlock from a hardirq context, resulting in the following deadlock scenario reported by lockdep: CPU0 CPU1 ---- ---- lock(nl_table_lock); local_irq_disable(); lock(&local->queue_stop_reason_lock); lock(nl_table_lock); <Interrupt> lock(&local->queue_stop_reason_lock); This seems valid, we can take the queue_stop_reason_lock in any kind of context ("CPU0"), and call ieee80211_report_ack_skb() with the spinlock held and IRQs disabled ("CPU1") in some code path (ieee80211_do_stop() via ieee80211_free_txskb()). Short of disallowing netlink use in scenarios like these (which would be rather complex in mac80211's case due to the deep callchain), it seems the only fix for this is to disable IRQs while nl_table_lock is held to avoid hitting this scenario, this disallows the "CPU0" portion of the reported deadlock. Note that the writer side (netlink_table_grab()) already disables IRQs for this lock. Unfortunately though, this seems like a huge hammer, and maybe the whole netlink table locking should be reworked. Reported-by: syzbot+69ff9dff50dcfe14ddd4@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16bonding: init notify_work earlier to avoid uninitialized useJohannes Berg1-1/+1
[ Upstream commit 35d96e631860226d5dc4de0fad0a415362ec2457 ] If bond_kobj_init() or later kzalloc() in bond_alloc_slave() fail, then we call kobject_put() on the slave->kobj. This in turn calls the release function slave_kobj_release() which will always try to cancel_delayed_work_sync(&slave->notify_work), which shouldn't be done on an uninitialized work struct. Always initialize the work struct earlier to avoid problems here. Syzbot bisected this down to a completely pointless commit, some fault injection may have been at work here that caused the alloc failure in the first place, which may interact badly with bisect. Reported-by: syzbot+bfda097c12a00c8cae67@syzkaller.appspotmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16isdn: mISDN: netjet: Fix crash in nj_probe:Zheyu Ma1-1/+0
[ Upstream commit 9f6f852550d0e1b7735651228116ae9d300f69b3 ] 'nj_setup' in netjet.c might fail with -EIO and in this case 'card->irq' is initialized and is bigger than zero. A subsequent call to 'nj_release' will free the irq that has not been requested. Fix this bug by deleting the previous assignment to 'card->irq' and just keep the assignment before 'request_irq'. The KASAN's log reveals it: [ 3.354615 ] WARNING: CPU: 0 PID: 1 at kernel/irq/manage.c:1826 free_irq+0x100/0x480 [ 3.355112 ] Modules linked in: [ 3.355310 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.355816 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.356552 ] RIP: 0010:free_irq+0x100/0x480 [ 3.356820 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.358012 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.358357 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.358814 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.359272 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.359732 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.360195 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.360652 ] FS: 0000000000000000(0000) GS:ffff88817bc00000(0000) knlGS:0000000000000000 [ 3.361170 ] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3.361538 ] CR2: 0000000000000000 CR3: 000000000582e000 CR4: 00000000000006f0 [ 3.362003 ] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3.362175 ] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3.362175 ] Call Trace: [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Kernel panic - not syncing: panic_on_warn set ... [ 3.362175 ] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-rc1-00144-g25a1298726e #13 [ 3.362175 ] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 3.362175 ] Call Trace: [ 3.362175 ] dump_stack+0xba/0xf5 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] panic+0x15a/0x3f2 [ 3.362175 ] ? __warn+0xf2/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] __warn+0x108/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] report_bug+0x119/0x1c0 [ 3.362175 ] handle_bug+0x3b/0x80 [ 3.362175 ] exc_invalid_op+0x18/0x70 [ 3.362175 ] asm_exc_invalid_op+0x12/0x20 [ 3.362175 ] RIP: 0010:free_irq+0x100/0x480 [ 3.362175 ] Code: 6e 08 74 6f 4d 89 f4 e8 5e ac 09 00 4d 8b 74 24 18 4d 85 f6 75 e3 e8 4f ac 09 00 8b 75 c8 48 c7 c7 78 c1 2e 85 e8 e0 cf f5 ff <0f> 0b 48 8b 75 c0 4c 89 ff e8 72 33 0b 03 48 8b 43 40 4c 8b a0 80 [ 3.362175 ] RSP: 0000:ffffc90000017b48 EFLAGS: 00010082 [ 3.362175 ] RAX: 0000000000000000 RBX: ffff888104dc8000 RCX: 0000000000000000 [ 3.362175 ] RDX: ffff8881003c8000 RSI: ffffffff8124a9e6 RDI: 00000000ffffffff [ 3.362175 ] RBP: ffffc90000017b88 R08: 0000000000000000 R09: 0000000000000000 [ 3.362175 ] R10: ffffc900000179f0 R11: 0000000000001d04 R12: 0000000000000000 [ 3.362175 ] R13: ffff888107dc6000 R14: ffff888107dc6928 R15: ffff888104dc80a8 [ 3.362175 ] ? vprintk+0x76/0x150 [ 3.362175 ] ? free_irq+0x100/0x480 [ 3.362175 ] nj_release+0x51/0x1e0 [ 3.362175 ] nj_probe+0x450/0x950 [ 3.362175 ] ? pci_device_remove+0x110/0x110 [ 3.362175 ] local_pci_probe+0x45/0xa0 [ 3.362175 ] pci_device_probe+0x12b/0x1d0 [ 3.362175 ] really_probe+0x2a9/0x610 [ 3.362175 ] driver_probe_device+0x90/0x1d0 [ 3.362175 ] ? mutex_lock_nested+0x1b/0x20 [ 3.362175 ] device_driver_attach+0x68/0x70 [ 3.362175 ] __driver_attach+0x124/0x1b0 [ 3.362175 ] ? device_driver_attach+0x70/0x70 [ 3.362175 ] bus_for_each_dev+0xbb/0x110 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] driver_attach+0x27/0x30 [ 3.362175 ] bus_add_driver+0x1eb/0x2a0 [ 3.362175 ] driver_register+0xa9/0x180 [ 3.362175 ] __pci_register_driver+0x82/0x90 [ 3.362175 ] ? w6692_init+0x38/0x38 [ 3.362175 ] nj_init+0x36/0x38 [ 3.362175 ] do_one_initcall+0x7f/0x3d0 [ 3.362175 ] ? rdinit_setup+0x45/0x45 [ 3.362175 ] ? rcu_read_lock_sched_held+0x4f/0x80 [ 3.362175 ] kernel_init_freeable+0x2aa/0x301 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] kernel_init+0x18/0x190 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ? rest_init+0x2c0/0x2c0 [ 3.362175 ] ret_from_fork+0x1f/0x30 [ 3.362175 ] Dumping ftrace buffer: [ 3.362175 ] (ftrace buffer empty) [ 3.362175 ] Kernel Offset: disabled [ 3.362175 ] Rebooting in 1 seconds.. Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16ASoC: sti-sas: add missing MODULE_DEVICE_TABLEZou Wei1-0/+1
[ Upstream commit e072b2671606c77538d6a4dd5dda80b508cb4816 ] This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16net/nfc/rawsock.c: fix a permission check bugJeimon1-1/+1
[ Upstream commit 8ab78863e9eff11910e1ac8bcf478060c29b379e ] The function rawsock_create() calls a privileged function sk_alloc(), which requires a ns-aware check to check net->user_ns, i.e., ns_capable(). However, the original code checks the init_user_ns using capable(). So we replace the capable() with ns_capable(). Signed-off-by: Jeimon <jjjinmeng.zhou@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-06-16proc: Track /proc/$pid/attr/ opener mm_structKees Cook1-1/+8
commit 591a22c14d3f45cc38bd1931c593c221df2f1881 upstream. Commit bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") tried to make sure that there could not be a confusion between the opener of a /proc/$pid/attr/ file and the writer. It used struct cred to make sure the privileges didn't change. However, there were existing cases where a more privileged thread was passing the opened fd to a differently privileged thread (during container setup). Instead, use mm_struct to track whether the opener and writer are still the same process. (This is what several other proc files already do, though for different reasons.) Reported-by: Christian Brauner <christian.brauner@ubuntu.com> Reported-by: Andrea Righi <andrea.righi@canonical.com> Tested-by: Andrea Righi <andrea.righi@canonical.com> Fixes: bfb819ea20ce ("proc: Check /proc/$pid/attr/ writes against file opener") Cc: stable@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10Linux 4.9.272v4.9.272Greg Kroah-Hartman1-1/+1
Link: https://lore.kernel.org/r/20210608175927.821075974@linuxfoundation.org Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jason Self <jason@bluehome.net> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10xen-pciback: redo VF placement in the virtual topologyJan Beulich1-6/+8
The commit referenced below was incomplete: It merely affected what would get written to the vdev-<N> xenstore node. The guest would still find the function at the original function number as long as __xen_pcibk_get_pci_dev() wouldn't be in sync. The same goes for AER wrt __xen_pcibk_get_pcifront_dev(). Undo overriding the function to zero and instead make sure that VFs at function zero remain alone in their slot. This has the added benefit of improving overall capacity, considering that there's only a total of 32 slots available right now (PCI segment and bus can both only ever be zero at present). This is upstream commit 4ba50e7c423c29639878c00573288869aa627068. Fixes: 8a5248fe10b1 ("xen PV passthru: assign SR-IOV virtual functions to separate virtual slots") Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/8def783b-404c-3452-196d-3f3fd4d72c9e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10arm64: Remove unimplemented syscall log messageMichael Weiser1-8/+0
commit 1962682d2b2fbe6cfa995a85c53c069fadda473e upstream. Stop printing a (ratelimited) kernel message for each instance of an unimplemented syscall being called. Userland making an unimplemented syscall is not necessarily misbehaviour and to be expected with a current userland running on an older kernel. Also, the current message looks scary to users but does not actually indicate a real problem nor help them narrow down the cause. Just rely on sys_ni_syscall() to return -ENOSYS. Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Michael Weiser <michael.weiser@gmx.de> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10KVM: SVM: Truncate GPR value for DR and CR accesses in !64-bit modeSean Christopherson1-4/+4
commit 0884335a2e653b8a045083aa1d57ce74269ac81d upstream. Drop bits 63:32 on loads/stores to/from DRs and CRs when the vCPU is not in 64-bit mode. The APM states bits 63:32 are dropped for both DRs and CRs: In 64-bit mode, the operand size is fixed at 64 bits without the need for a REX prefix. In non-64-bit mode, the operand size is fixed at 32 bits and the upper 32 bits of the destination are forced to 0. Fixes: 7ff76d58a9dc ("KVM: SVM: enhance MOV CR intercept handler") Fixes: cae3797a4639 ("KVM: SVM: enhance mov DR intercept handler") Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <seanjc@google.com> Message-Id: <20210422022128.3464144-4-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> [sudip: manual backport to old file] Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10bnxt_en: Remove the setting of dev_port.Michael Chan1-1/+0
commit 1d86859fdf31a0d50cc82b5d0d6bfb5fe98f6c00 upstream. The dev_port is meant to distinguish the network ports belonging to the same PCI function. Our devices only have one network port associated with each PCI function and so we should not set it for correctness. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10btrfs: fixup error handling in fixup_inode_link_countsJosef Bacik1-6/+7
commit 011b28acf940eb61c000059dd9e2cfcbf52ed96b upstream. This function has the following pattern while (1) { ret = whatever(); if (ret) goto out; } ret = 0 out: return ret; However several places in this while loop we simply break; when there's a problem, thus clearing the return value, and in one case we do a return -EIO, and leak the memory for the path. Fix this by re-arranging the loop to deal with ret == 1 coming from btrfs_search_slot, and then simply delete the ret = 0; out: bit so everybody can break if there is an error, which will allow for proper error handling to occur. CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-10btrfs: fix error handling in btrfs_del_csumsJosef Bacik1-5/+5
commit b86652be7c83f70bf406bed18ecf55adb9bfb91b upstream. Error injection stress would sometimes fail with checksums on disk that did not have a corresponding extent. This occurred because the pattern in btrfs_del_csums was while (1) { ret = btrfs_search_slot(); if (ret < 0) break; } ret = 0; out: btrfs_free_path(path); return ret; If we got an error from btrfs_search_slot we'd clear the error because we were breaking instead of goto out. Instead of using goto out, simply handle the cases where we may leave a random value in ret, and get rid of the ret = 0; out: pattern and simply allow break to have the proper error reporting. With this fix we properly abort the transaction and do not commit thinking we successfully deleted the csum. Reviewed-by: Qu Wenruo <wqu@suse.com> CC: stable@vger.kernel.org # 4.4+ Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-13 13:05:28 +0300