summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-11-18drm/amdgpu: perform srbm soft reset always on SDMA resumeEvan Quan1-15/+12
[ Upstream commit 253475c455eb5f8da34faa1af92709e7bb414624 ] This can address the random SDMA hang after pci config reset seen on Hawaii. Signed-off-by: Evan Quan <evan.quan@amd.com> Tested-by: Sandeep Raghuraman <sandy.8925@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18scsi: hpsa: Fix memory leak in hpsa_init_one()Keita Suzuki1-1/+3
[ Upstream commit af61bc1e33d2c0ec22612b46050f5b58ac56a962 ] When hpsa_scsi_add_host() fails, h->lastlogicals is leaked since it is missing a free() in the error handler. Fix this by adding free() when hpsa_scsi_add_host() fails. Link: https://lore.kernel.org/r/20201027073125.14229-1-keitasuzuki.park@sslab.ics.keio.ac.jp Tested-by: Don Brace <don.brace@microchip.com> Acked-by: Don Brace <don.brace@microchip.com> Signed-off-by: Keita Suzuki <keitasuzuki.park@sslab.ics.keio.ac.jp> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18gfs2: check for live vs. read-only file system in gfs2_fitrimBob Peterson1-0/+3
[ Upstream commit c5c68724696e7d2f8db58a5fce3673208d35c485 ] Before this patch, gfs2_fitrim was not properly checking for a "live" file system. If the file system had something to trim and the file system was read-only (or spectator) it would start the trim, but when it starts the transaction, gfs2_trans_begin returns -EROFS (read-only file system) and it errors out. However, if the file system was already trimmed so there's no work to do, it never called gfs2_trans_begin. That code is bypassed so it never returns the error. Instead, it returns a good return code with 0 work. All this makes for inconsistent behavior: The same fstrim command can return -EROFS in one case and 0 in another. This tripped up xfstests generic/537 which reports the error as: +fstrim with unrecovered metadata just ate your filesystem This patch adds a check for a "live" (iow, active journal, iow, RW) file system, and if not, returns the error properly. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-freeBob Peterson1-1/+1
[ Upstream commit d0f17d3883f1e3f085d38572c2ea8edbd5150172 ] Function gfs2_clear_rgrpd calls kfree(rgd->rd_bits) before calling return_all_reservations, but return_all_reservations still dereferences rgd->rd_bits in __rs_deltree. Fix that by moving the call to kfree below the call to return_all_reservations. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18usb: gadget: goku_udc: fix potential crashes in probeEvgeny Novikov1-1/+1
[ Upstream commit 0d66e04875c5aae876cf3d4f4be7978fa2b00523 ] goku_probe() goes to error label "err" and invokes goku_remove() in case of failures of pci_enable_device(), pci_resource_start() and ioremap(). goku_remove() gets a device from pci_get_drvdata(pdev) and works with it without any checks, in particular it dereferences a corresponding pointer. But goku_probe() did not set this device yet. So, one can expect various crashes. The patch moves setting the device just after allocation of memory for it. Found by Linux Driver Verification project (linuxtesting.org). Reported-by: Pavel Andrianov <andrianov@ispras.ru> Signed-off-by: Evgeny Novikov <novikov@ispras.ru> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18ath9k_htc: Use appropriate rs_datalen typeMasashi Honma1-1/+1
commit 5024f21c159f8c1668f581fff37140741c0b1ba9 upstream. kernel test robot says: drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: warning: incorrect type in assignment (different base types) drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: expected restricted __be16 [usertype] rs_datalen drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:987:20: sparse: got unsigned short [usertype] drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:988:13: sparse: warning: restricted __be16 degrades to integer drivers/net/wireless/ath/ath9k/htc_drv_txrx.c:1001:13: sparse: warning: restricted __be16 degrades to integer Indeed rs_datalen has host byte order, so modify it's own type. Reported-by: kernel test robot <lkp@intel.com> Fixes: cd486e627e67 ("ath9k_htc: Discard undersized packets") Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200808233258.4596-1-masashi.honma@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-18geneve: add transport ports in route lookup for geneveMark Gray1-10/+26
commit 34beb21594519ce64a55a498c2fe7d567bc1ca20 upstream. This patch adds transport ports information for route lookup so that IPsec can select Geneve tunnel traffic to do encryption. This is needed for OVS/OVN IPsec with encrypted Geneve tunnels. This can be tested by configuring a host-host VPN using an IKE daemon and specifying port numbers. For example, for an Openswan-type configuration, the following parameters should be configured on both hosts and IPsec set up as-per normal: $ cat /etc/ipsec.conf conn in ... left=$IP1 right=$IP2 ... leftprotoport=udp/6081 rightprotoport=udp ... conn out ... left=$IP1 right=$IP2 ... leftprotoport=udp rightprotoport=udp/6081 ... The tunnel can then be setup using "ip" on both hosts (but changing the relevant IP addresses): $ ip link add tun type geneve id 1000 remote $IP2 $ ip addr add 192.168.0.1/24 dev tun $ ip link set tun up This can then be tested by pinging from $IP1: $ ping 192.168.0.2 Without this patch the traffic is unencrypted on the wire. Fixes: 2d07dc79fe04 ("geneve: add initial netdev driver for GENEVE tunnels") Signed-off-by: Qiuyu Xiao <qiuyu.xiao.qyx@gmail.com> Signed-off-by: Mark Gray <mark.d.gray@redhat.com> Reviewed-by: Greg Rose <gvrose8192@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> [bwh: Backported to 4.9: - Use geneve->dst_port instead of geneve->cfg.info.key.tp_dst - Adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18i40e: Memory leak in i40e_config_iwarp_qvlistMartyna Szapar1-8/+15
commit 0b63644602cfcbac849f7ea49272a39e90fa95eb upstream. Added freeing the old allocation of vf->qvlist_info in function i40e_config_iwarp_qvlist before overwriting it with the new allocation. Signed-off-by: Martyna Szapar <martyna.szapar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18i40e: Fix of memory leak and integer truncation in i40e_virtchnl.cMartyna Szapar1-1/+1
commit 24474f2709af6729b9b1da1c5e160ab62e25e3a4 upstream. Fixed possible memory leak in i40e_vc_add_cloud_filter function: cfilter is being allocated and in some error conditions the function returns without freeing the memory. Fix of integer truncation from u16 (type of queue_id value) to u8 when calling i40e_vc_isvalid_queue_id function. Signed-off-by: Martyna Szapar <martyna.szapar@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [bwh: Backported to 4.9: i40e_vc_add_cloud_filter() does not exist but the integer truncation is still possible] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18i40e: Wrong truncation from u16 to u8Grzegorz Siwik1-1/+1
commit c004804dceee9ca384d97d9857ea2e2795c2651d upstream. In this patch fixed wrong truncation method from u16 to u8 during validation. It was changed by changing u8 to u32 parameter in method declaration and arguments were changed to u32. Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18i40e: add num_vectors checker in iwarp handlerSergey Nemov1-0/+10
commit 7015ca3df965378bcef072cca9cd63ed098665b5 upstream. Field num_vectors from struct virtchnl_iwarp_qvlist_info should not be larger than num_msix_vectors_vf in the hw struct. The iwarp uses the same set of vectors as the LAN VF driver. Signed-off-by: Sergey Nemov <sergey.nemov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18i40e: Fix a potential NULL pointer dereferenceChristophe JAILLET1-0/+3
commit 54902349ee95045b67e2f0c39b75f5418540064b upstream. If 'kzalloc()' fails, a NULL pointer will be dereferenced. Return an error code (-ENOMEM) instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18pinctrl: devicetree: Avoid taking direct reference to device name stringWill Deacon1-6/+20
commit be4c60b563edee3712d392aaeb0943a768df7023 upstream. When populating the pinctrl mapping table entries for a device, the 'dev_name' field for each entry is initialised to point directly at the string returned by 'dev_name()' for the device and subsequently used by 'create_pinctrl()' when looking up the mappings for the device being probed. This is unreliable in the presence of calls to 'dev_set_name()', which may reallocate the device name string leaving the pinctrl mappings with a dangling reference. This then leads to a use-after-free every time the name is dereferenced by a device probe: | BUG: KASAN: invalid-access in strcmp+0x20/0x64 | Read of size 1 at addr 13ffffc153494b00 by task modprobe/590 | Pointer tag: [13], memory tag: [fe] | | Call trace: | __kasan_report+0x16c/0x1dc | kasan_report+0x10/0x18 | check_memory_region | __hwasan_load1_noabort+0x4c/0x54 | strcmp+0x20/0x64 | create_pinctrl+0x18c/0x7f4 | pinctrl_get+0x90/0x114 | devm_pinctrl_get+0x44/0x98 | pinctrl_bind_pins+0x5c/0x450 | really_probe+0x1c8/0x9a4 | driver_probe_device+0x120/0x1d8 Follow the example of sysfs, and duplicate the device name string before stashing it away in the pinctrl mapping entries. Cc: Linus Walleij <linus.walleij@linaro.org> Reported-by: Elena Petrova <lenaptr@google.com> Tested-by: Elena Petrova <lenaptr@google.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20191002124206.22928-1-will@kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> [bwh: Backported to 4.9: adjust context] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18Btrfs: fix missing error return if writeback for extent buffer never startedFilipe Manana1-0/+4
[ Upstream commit 0607eb1d452d45c5ac4c745a9e9e0d95152ea9d0 ] If lock_extent_buffer_for_io() fails, it returns a negative value, but its caller btree_write_cache_pages() ignores such error. This means that a call to flush_write_bio(), from lock_extent_buffer_for_io(), might have failed. We should make btree_write_cache_pages() notice such error values and stop immediatelly, making sure filemap_fdatawrite_range() returns an error to the transaction commit path. A failure from flush_write_bio() should also result in the endio callback end_bio_extent_buffer_writepage() being invoked, which sets the BTRFS_FS_*_ERR bits appropriately, so that there's no risk a transaction or log commit doesn't catch a writeback failure. Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18xfs: flush new eof page on truncate to avoid post-eof corruptionBrian Foster1-0/+10
[ Upstream commit 869ae85dae64b5540e4362d7fe4cd520e10ec05c ] It is possible to expose non-zeroed post-EOF data in XFS if the new EOF page is dirty, backed by an unwritten block and the truncate happens to race with writeback. iomap_truncate_page() will not zero the post-EOF portion of the page if the underlying block is unwritten. The subsequent call to truncate_setsize() will, but doesn't dirty the page. Therefore, if writeback happens to complete after iomap_truncate_page() (so it still sees the unwritten block) but before truncate_setsize(), the cached page becomes inconsistent with the on-disk block. A mapped read after the associated page is reclaimed or invalidated exposes non-zero post-EOF data. For example, consider the following sequence when run on a kernel modified to explicitly flush the new EOF page within the race window: $ xfs_io -fc "falloc 0 4k" -c fsync /mnt/file $ xfs_io -c "pwrite 0 4k" -c "truncate 1k" /mnt/file ... $ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file 00000400: 00 00 00 00 00 00 00 00 ........ $ umount /mnt/; mount <dev> /mnt/ $ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file 00000400: cd cd cd cd cd cd cd cd ........ Update xfs_setattr_size() to explicitly flush the new EOF page prior to the page truncate to ensure iomap has the latest state of the underlying block. Fixes: 68a9f5e7007c ("xfs: implement iomap based buffered write path") Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrappingStephane Grosjean1-5/+46
[ Upstream commit ecc7b4187dd388549544195fb13a11b4ea8e6a84 ] Fabian Inostroza <fabianinostrozap@gmail.com> has discovered a potential problem in the hardware timestamp reporting from the PCAN-USB USB CAN interface (only), related to the fact that a timestamp of an event may precede the timestamp used for synchronization when both records are part of the same USB packet. However, this case was used to detect the wrapping of the time counter. This patch details and fixes the two identified cases where this problem can occur. Reported-by: Fabian Inostroza <fabianinostrozap@gmail.com> Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Link: https://lore.kernel.org/r/20201014085631.15128-1-s.grosjean@peak-system.com Fixes: bb4785551f64 ("can: usb: PEAK-System Technik USB adapters driver core") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18can: peak_usb: add range checking in decode operationsDan Carpenter1-11/+37
[ Upstream commit a6921dd524fe31d1f460c161d3526a407533b6db ] These values come from skb->data so Smatch considers them untrusted. I believe Smatch is correct but I don't have a way to test this. The usb_if->dev[] array has 2 elements but the index is in the 0-15 range without checks. The cfd->len can be up to 255 but the maximum valid size is CANFD_MAX_DLEN (64) so that could lead to memory corruption. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20200813140604.GA456946@mwanda Acked-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18can: can_create_echo_skb(): fix echo skb generation: always use skb_clone()Oleksij Rempel1-12/+8
[ Upstream commit 286228d382ba6320f04fa2e7c6fc8d4d92e428f4 ] All user space generated SKBs are owned by a socket (unless injected into the key via AF_PACKET). If a socket is closed, all associated skbs will be cleaned up. This leads to a problem when a CAN driver calls can_put_echo_skb() on a unshared SKB. If the socket is closed prior to the TX complete handler, can_get_echo_skb() and the subsequent delivering of the echo SKB to all registered callbacks, a SKB with a refcount of 0 is delivered. To avoid the problem, in can_get_echo_skb() the original SKB is now always cloned, regardless of shared SKB or not. If the process exists it can now safely discard its SKBs, without disturbing the delivery of the echo SKB. The problem shows up in the j1939 stack, when it clones the incoming skb, which detects the already 0 refcount. We can easily reproduce this with following example: testj1939 -B -r can0: & cansend can0 1823ff40#0123 WARNING: CPU: 0 PID: 293 at lib/refcount.c:25 refcount_warn_saturate+0x108/0x174 refcount_t: addition on 0; use-after-free. Modules linked in: coda_vpu imx_vdoa videobuf2_vmalloc dw_hdmi_ahb_audio vcan CPU: 0 PID: 293 Comm: cansend Not tainted 5.5.0-rc6-00376-g9e20dcb7040d #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Backtrace: [<c010f570>] (dump_backtrace) from [<c010f90c>] (show_stack+0x20/0x24) [<c010f8ec>] (show_stack) from [<c0c3e1a4>] (dump_stack+0x8c/0xa0) [<c0c3e118>] (dump_stack) from [<c0127fec>] (__warn+0xe0/0x108) [<c0127f0c>] (__warn) from [<c01283c8>] (warn_slowpath_fmt+0xa8/0xcc) [<c0128324>] (warn_slowpath_fmt) from [<c0539c0c>] (refcount_warn_saturate+0x108/0x174) [<c0539b04>] (refcount_warn_saturate) from [<c0ad2cac>] (j1939_can_recv+0x20c/0x210) [<c0ad2aa0>] (j1939_can_recv) from [<c0ac9dc8>] (can_rcv_filter+0xb4/0x268) [<c0ac9d14>] (can_rcv_filter) from [<c0aca2cc>] (can_receive+0xb0/0xe4) [<c0aca21c>] (can_receive) from [<c0aca348>] (can_rcv+0x48/0x98) [<c0aca300>] (can_rcv) from [<c09b1fdc>] (__netif_receive_skb_one_core+0x64/0x88) [<c09b1f78>] (__netif_receive_skb_one_core) from [<c09b2070>] (__netif_receive_skb+0x38/0x94) [<c09b2038>] (__netif_receive_skb) from [<c09b2130>] (netif_receive_skb_internal+0x64/0xf8) [<c09b20cc>] (netif_receive_skb_internal) from [<c09b21f8>] (netif_receive_skb+0x34/0x19c) [<c09b21c4>] (netif_receive_skb) from [<c0791278>] (can_rx_offload_napi_poll+0x58/0xb4) Fixes: 0ae89beb283a ("can: add destructor for self generated skbs") Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: http://lore.kernel.org/r/20200124132656.22156-1-o.rempel@pengutronix.de Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18can: dev: __can_get_echo_skb(): fix real payload length return value for RTR ↵Oliver Hartkopp1-2/+6
frames [ Upstream commit ed3320cec279407a86bc4c72edc4a39eb49165ec ] The can_get_echo_skb() function returns the number of received bytes to be used for netdev statistics. In the case of RTR frames we get a valid (potential non-zero) data length value which has to be passed for further operations. But on the wire RTR frames have no payload length. Therefore the value to be used in the statistics has to be zero for RTR frames. Reported-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net> Link: https://lore.kernel.org/r/20201020064443.80164-1-socketcan@hartkopp.net Fixes: cf5046b309b3 ("can: dev: let can_get_echo_skb() return dlc of CAN frame") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18can: dev: can_get_echo_skb(): prevent call to kfree_skb() in hard IRQ contextVincent Mailhol1-1/+5
[ Upstream commit 2283f79b22684d2812e5c76fc2280aae00390365 ] If a driver calls can_get_echo_skb() during a hardware IRQ (which is often, but not always, the case), the 'WARN_ON(in_irq)' in net/core/skbuff.c#skb_release_head_state() might be triggered, under network congestion circumstances, together with the potential risk of a NULL pointer dereference. The root cause of this issue is the call to kfree_skb() instead of dev_kfree_skb_irq() in net/core/dev.c#enqueue_to_backlog(). This patch prevents the skb to be freed within the call to netif_rx() by incrementing its reference count with skb_get(). The skb is finally freed by one of the in-irq-context safe functions: dev_consume_skb_any() or dev_kfree_skb_any(). The "any" version is used because some drivers might call can_get_echo_skb() in a normal context. The reason for this issue to occur is that initially, in the core network stack, loopback skb were not supposed to be received in hardware IRQ context. The CAN stack is an exeption. This bug was previously reported back in 2017 in [1] but the proposed patch never got accepted. While [1] directly modifies net/core/dev.c, we try to propose here a smoother modification local to CAN network stack (the assumption behind is that only CAN devices are affected by this issue). [1] http://lore.kernel.org/r/57a3ffb6-3309-3ad5-5a34-e93c3fe3614d@cetitec.com Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/r/20201002154219.4887-2-mailhol.vincent@wanadoo.fr Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18ALSA: hda: prevent undefined shift in snd_hdac_ext_bus_get_link()Dan Carpenter1-0/+2
[ Upstream commit 158e1886b6262c1d1c96a18c85fac5219b8bf804 ] This is harmless, but the "addr" comes from the user and it could lead to a negative shift or to shift wrapping if it's too high. Fixes: 0b00a5615dc4 ("ALSA: hdac_ext: add hdac extended controller") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20201103101807.GC1127762@mwanda Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18perf tools: Add missing swap for ino_generationJiri Olsa1-0/+1
[ Upstream commit fe01adb72356a4e2f8735e4128af85921ca98fa1 ] We are missing swap for ino_generation field. Fixes: 5c5e854bc760 ("perf tools: Add attr->mmap2 support") Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18net: xfrm: fix a race condition during allocing spizhuoliang zhang1-3/+5
[ Upstream commit a779d91314ca7208b7feb3ad817b62904397c56d ] we found that the following race condition exists in xfrm_alloc_userspi flow: user thread state_hash_work thread ---- ---- xfrm_alloc_userspi() __find_acq_core() /*alloc new xfrm_state:x*/ xfrm_state_alloc() /*schedule state_hash_work thread*/ xfrm_hash_grow_check() xfrm_hash_resize() xfrm_alloc_spi /*hold lock*/ x->id.spi = htonl(spi) spin_lock_bh(&net->xfrm.xfrm_state_lock) /*waiting lock release*/ xfrm_hash_transfer() spin_lock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi*/ hlist_add_head_rcu(&x->byspi) spin_unlock_bh(&net->xfrm.xfrm_state_lock) /*add x into hlist:net->xfrm.state_byspi 2 times*/ hlist_add_head_rcu(&x->byspi) 1. a new state x is alloced in xfrm_state_alloc() and added into the bydst hlist in __find_acq_core() on the LHS; 2. on the RHS, state_hash_work thread travels the old bydst and tranfers every xfrm_state (include x) into the new bydst hlist and new byspi hlist; 3. user thread on the LHS gets the lock and adds x into the new byspi hlist again. So the same xfrm_state (x) is added into the same list_hash (net->xfrm.state_byspi) 2 times that makes the list_hash become an inifite loop. To fix the race, x->id.spi = htonl(spi) in the xfrm_alloc_spi() is moved to the back of spin_lock_bh, sothat state_hash_work thread no longer add x which id.spi is zero into the hash_list. Fixes: f034b5d4efdf ("[XFRM]: Dynamic xfrm_state hash table sizing.") Signed-off-by: zhuoliang zhang <zhuoliang.zhang@mediatek.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18genirq: Let GENERIC_IRQ_IPI select IRQ_DOMAIN_HIERARCHYMarc Zyngier1-0/+1
[ Upstream commit 151a535171be6ff824a0a3875553ea38570f4c05 ] kernel/irq/ipi.c otherwise fails to compile if nothing else selects it. Fixes: 379b656446a3 ("genirq: Add GENERIC_IRQ_IPI Kconfig symbol") Reported-by: Pavel Machek <pavel@ucw.cz> Tested-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201015101222.GA32747@amd Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18btrfs: reschedule when cloning lots of extentsJohannes Thumshirn1-0/+2
[ Upstream commit 6b613cc97f0ace77f92f7bc112b8f6ad3f52baf8 ] We have several occurrences of a soft lockup from fstest's generic/175 testcase, which look more or less like this one: watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [xfs_io:10030] Kernel panic - not syncing: softlockup: hung tasks CPU: 0 PID: 10030 Comm: xfs_io Tainted: G L 5.9.0-rc5+ #768 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Call Trace: <IRQ> dump_stack+0x77/0xa0 panic+0xfa/0x2cb watchdog_timer_fn.cold+0x85/0xa5 ? lockup_detector_update_enable+0x50/0x50 __hrtimer_run_queues+0x99/0x4c0 ? recalibrate_cpu_khz+0x10/0x10 hrtimer_run_queues+0x9f/0xb0 update_process_times+0x28/0x80 tick_handle_periodic+0x1b/0x60 __sysvec_apic_timer_interrupt+0x76/0x210 asm_call_on_stack+0x12/0x20 </IRQ> sysvec_apic_timer_interrupt+0x7f/0x90 asm_sysvec_apic_timer_interrupt+0x12/0x20 RIP: 0010:btrfs_tree_unlock+0x91/0x1a0 [btrfs] RSP: 0018:ffffc90007123a58 EFLAGS: 00000282 RAX: ffff8881cea2fbe0 RBX: ffff8881cea2fbe0 RCX: 0000000000000000 RDX: ffff8881d23fd200 RSI: ffffffff82045220 RDI: ffff8881cea2fba0 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000032 R10: 0000160000000000 R11: 0000000000001000 R12: 0000000000001000 R13: ffff8882357fd5b0 R14: ffff88816fa76e70 R15: ffff8881cea2fad0 ? btrfs_tree_unlock+0x15b/0x1a0 [btrfs] btrfs_release_path+0x67/0x80 [btrfs] btrfs_insert_replace_extent+0x177/0x2c0 [btrfs] btrfs_replace_file_extents+0x472/0x7c0 [btrfs] btrfs_clone+0x9ba/0xbd0 [btrfs] btrfs_clone_files.isra.0+0xeb/0x140 [btrfs] ? file_update_time+0xcd/0x120 btrfs_remap_file_range+0x322/0x3b0 [btrfs] do_clone_file_range+0xb7/0x1e0 vfs_clone_file_range+0x30/0xa0 ioctl_file_clone+0x8a/0xc0 do_vfs_ioctl+0x5b2/0x6f0 __x64_sys_ioctl+0x37/0xa0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f87977fc247 RSP: 002b:00007ffd51a2f6d8 EFLAGS: 00000206 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f87977fc247 RDX: 00007ffd51a2f710 RSI: 000000004020940d RDI: 0000000000000003 RBP: 0000000000000004 R08: 00007ffd51a79080 R09: 0000000000000000 R10: 00005621f11352f2 R11: 0000000000000206 R12: 0000000000000000 R13: 0000000000000000 R14: 00005621f128b958 R15: 0000000080000000 Kernel Offset: disabled ---[ end Kernel panic - not syncing: softlockup: hung tasks ]--- All of these lockup reports have the call chain btrfs_clone_files() -> btrfs_clone() in common. btrfs_clone_files() calls btrfs_clone() with both source and destination extents locked and loops over the source extent to create the clones. Conditionally reschedule in the btrfs_clone() loop, to give some time back to other processes. CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18time: Prevent undefined behaviour in timespec64_to_ns()Zeng Tao1-0/+4
[ Upstream commit cb47755725da7b90fecbb2aa82ac3b24a7adb89b ] UBSAN reports: Undefined behaviour in ./include/linux/time64.h:127:27 signed integer overflow: 17179869187 * 1000000000 cannot be represented in type 'long long int' Call Trace: timespec64_to_ns include/linux/time64.h:127 [inline] set_cpu_itimer+0x65c/0x880 kernel/time/itimer.c:180 do_setitimer+0x8e/0x740 kernel/time/itimer.c:245 __x64_sys_setitimer+0x14c/0x2c0 kernel/time/itimer.c:336 do_syscall_64+0xa1/0x540 arch/x86/entry/common.c:295 Commit bd40a175769d ("y2038: itimer: change implementation to timespec64") replaced the original conversion which handled time clamping correctly with timespec64_to_ns() which has no overflow protection. Fix it in timespec64_to_ns() as this is not necessarily limited to the usage in itimers. [ tglx: Added comment and adjusted the fixes tag ] Fixes: 361a3bf00582 ("time64: Add time64.h header and define struct timespec64") Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1598952616-6416-1-git-send-email-prime.zeng@hisilicon.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18mm: mempolicy: fix potential pte_unmap_unlock pte errorShijie Luo1-3/+3
[ Upstream commit 3f08842098e842c51e3b97d0dcdebf810b32558e ] When flags in queue_pages_pte_range don't have MPOL_MF_MOVE or MPOL_MF_MOVE_ALL bits, code breaks and passing origin pte - 1 to pte_unmap_unlock seems like not a good idea. queue_pages_pte_range can run in MPOL_MF_MOVE_ALL mode which doesn't migrate misplaced pages but returns with EIO when encountering such a page. Since commit a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified") and early break on the first pte in the range results in pte_unmap_unlock on an underflow pte. This can lead to lockups later on when somebody tries to lock the pte resp. page_table_lock again.. Fixes: a7f40cfe3b7a ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified") Signed-off-by: Shijie Luo <luoshijie1@huawei.com> Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Feilong Lin <linfeilong@huawei.com> Cc: Shijie Luo <luoshijie1@huawei.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20201019074853.50856-1-luoshijie1@huawei.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18gfs2: Wake up when sd_glock_disposal becomes zeroAlexander Aring1-1/+2
[ Upstream commit da7d554f7c62d0c17c1ac3cc2586473c2d99f0bd ] Commit fc0e38dae645 ("GFS2: Fix glock deallocation race") fixed a sd_glock_disposal accounting bug by adding a missing atomic_dec statement, but it failed to wake up sd_glock_wait when that decrement causes sd_glock_disposal to reach zero. As a consequence, gfs2_gl_hash_clear can now run into a 10-minute timeout instead of being woken up. Add the missing wakeup. Fixes: fc0e38dae645 ("GFS2: Fix glock deallocation race") Cc: stable@vger.kernel.org # v2.6.39+ Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18ring-buffer: Fix recursion protection transitions between interrupt contextSteven Rostedt (VMware)1-10/+44
[ Upstream commit b02414c8f045ab3b9afc816c3735bc98c5c3d262 ] The recursion protection of the ring buffer depends on preempt_count() to be correct. But it is possible that the ring buffer gets called after an interrupt comes in but before it updates the preempt_count(). This will trigger a false positive in the recursion code. Use the same trick from the ftrace function callback recursion code which uses a "transition" bit that gets set, to allow for a single recursion for to handle transitions between contexts. Cc: stable@vger.kernel.org Fixes: 567cd4da54ff4 ("ring-buffer: User context bit recursion checking") Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-18regulator: defer probe when trying to get voltage from unresolved supplyMichał Mirosław1-0/+2
[ Upstream commit cf1ad559a20d1930aa7b47a52f54e1f8718de301 ] regulator_get_voltage_rdev() is called in regulator probe() when applying machine constraints. The "fixed" commit exposed the problem that non-bypassed regulators can forward the request to its parent (like bypassed ones) supply. Return -EPROBE_DEFER when the supply is expected but not resolved yet. Fixes: aea6cb99703e ("regulator: resolve supply after creating regulator") Cc: stable@vger.kernel.org Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Reported-by: Ondřej Jirman <megous@megous.com> Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com> Tested-by: Ondřej Jirman <megous@megous.com> Link: https://lore.kernel.org/r/a9041d68b4d35e4a2dd71629c8a6422662acb5ee.1604351936.git.mirq-linux@rere.qmqm.pl Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10Linux 4.9.243v4.9.243Greg Kroah-Hartman1-1/+1
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10powercap: restrict energy meter to root accessLen Brown1-2/+2
commit 949dd0104c496fa7c14991a23c03c62e44637e71 upstream. Remove non-privileged user access to power data contained in /sys/class/powercap/intel-rapl*/*/energy_uj Non-privileged users currently have read access to power data and can use this data to form a security attack. Some privileged drivers/applications need read access to this data, but don't expose it to non-privileged users. For example, thermald uses this data to ensure that power management works correctly. Thus removing non-privileged access is preferred over completely disabling this power reporting capability with CONFIG_INTEL_RAPL=n. Fixes: 95677a9a3847 ("PowerCap: Fix mode for energy counter") Signed-off-by: Len Brown <len.brown@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10Linux 4.9.242v4.9.242Greg Kroah-Hartman1-1/+1
Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20201109125025.630721781@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10Revert "ARC: entry: fix potential EFA clobber when TIF_SYSCALL_TRACE"Vineet Gupta1-5/+11
This reverts commit 00fdec98d9881bf5173af09aebd353ab3b9ac729. (but only from 5.2 and prior kernels) The original commit was a preventive fix based on code-review and was auto-picked for stable back-port (for better or worse). It was OK for v5.3+ kernels, but turned up needing an implicit change 68e5c6f073bcf70 "(ARC: entry: EV_Trap expects r10 (vs. r9) to have exception cause)" merged in v5.3 which itself was not backported. So to summarize the stable backport of this patch for v5.2 and prior kernels is busted and it won't boot. The obvious solution is backport 68e5c6f073bcf70 but that is a pain as it doesn't revert cleanly and each of affected kernels (so far v4.19, v4.14, v4.9, v4.4) needs a slightly different massaged varaint. So the easier fix is to simply revert the backport from 5.2 and prior. The issue was not a big deal as it would cause strace to sporadically not work correctly. Waldemar Brodkorb first reported this when running ARC uClibc regressions on latest stable kernels (with offending backport). Once he bisected it, the analysis was trivial, so thx to him for this. Reported-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Bisected-by: Waldemar Brodkorb <wbx@uclibc-ng.org> Cc: stable <stable@vger.kernel.org> # 5.2 and prior Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10ARC: stack unwinding: avoid indefinite loopingVineet Gupta1-1/+6
commit 328d2168ca524d501fc4b133d6be076142bd305c upstream. Currently stack unwinder is a while(1) loop which relies on the dwarf unwinder to signal termination, which in turn relies on dwarf info to do so. This in theory could cause an infinite loop if the dwarf info was somehow messed up or the register contents were etc. This fix thus detects the excessive looping and breaks the loop. | Mem: 26184K used, 1009136K free, 0K shrd, 0K buff, 14416K cached | CPU: 0.0% usr 72.8% sys 0.0% nic 27.1% idle 0.0% io 0.0% irq 0.0% sirq | Load average: 4.33 2.60 1.11 2/74 139 | PID PPID USER STAT VSZ %VSZ CPU %CPU COMMAND | 133 2 root SWN 0 0.0 3 22.9 [rcu_torture_rea] | 132 2 root SWN 0 0.0 0 22.0 [rcu_torture_rea] | 131 2 root SWN 0 0.0 3 21.5 [rcu_torture_rea] | 126 2 root RW 0 0.0 2 5.4 [rcu_torture_wri] | 129 2 root SWN 0 0.0 0 0.2 [rcu_torture_fak] | 137 2 root SW 0 0.0 0 0.2 [rcu_torture_cbf] | 127 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 138 115 root R 1464 0.1 2 0.1 top | 130 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 128 2 root SWN 0 0.0 0 0.1 [rcu_torture_fak] | 115 1 root S 1472 0.1 1 0.0 -/bin/sh | 104 1 root S 1464 0.1 0 0.0 inetd | 1 0 root S 1456 0.1 2 0.0 init | 78 1 root S 1456 0.1 0 0.0 syslogd -O /var/log/messages | 134 2 root SW 0 0.0 2 0.0 [rcu_torture_sta] | 10 2 root IW 0 0.0 1 0.0 [rcu_preempt] | 88 2 root IW 0 0.0 1 0.0 [kworker/1:1-eve] | 66 2 root IW 0 0.0 2 0.0 [kworker/2:2-eve] | 39 2 root IW 0 0.0 2 0.0 [kworker/2:1-eve] | unwinder looping too long, aborting ! Cc: <stable@vger.kernel.org> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: Add NO_LPM quirk for Kingston flash driveAlan Stern1-0/+3
commit afaa2e745a246c5ab95103a65b1ed00101e1bc63 upstream. In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston flash drive spontaneously disconnects and reconnects, over and over. Testing revealed that disabling Link Power Management for the drive fixed the problem. This patch adds a quirk entry for that drive to turn off LPM permanently. CC: Hans de Goede <jwrdegoede@fedoraproject.org> CC: <stable@vger.kernel.org> Reported-and-tested-by: Julien Humbert <julroy67@gmail.com> Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas1-0/+2
commit db0362eeb22992502764e825c79b922d7467e0eb upstream. Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas1-0/+6
commit 489979b4aab490b6b917c11dc02d81b4b742784a upstream. Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <dnlplm@gmail.com> Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10USB: serial: cyberjack: fix write-URB completion raceJohan Hovold1-1/+6
commit 985616f0457d9f555fff417d0da56174f70cc14f upstream. The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <stable@vger.kernel.org> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10serial: txx9: add missing platform_driver_unregister() on error in ↵Qinglang Miao1-0/+3
serial_txx9_init commit 0c5fc92622ed5531ff324b20f014e9e3092f0187 upstream. Add the missing platform_driver_unregister() before return from serial_txx9_init in the error handling case when failed to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI defined. Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10serial: 8250_mtk: Fix uart_get_baud_rate warningClaire Chang1-1/+1
commit 912ab37c798770f21b182d656937072b58553378 upstream. Mediatek 8250 port supports speed higher than uartclk / 16. If the baud rates in both the new and the old termios setting are higher than uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered. Passing NULL as the old termios so uart_get_baud_rate() will use uartclk / 16 - 1 as the new baud rate which will be replaced by the original baud rate later by tty_termios_encode_baud_rate() in mtk8250_set_termios(). Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping") Signed-off-by: Claire Chang <tientzu@chromium.org> Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10fork: fix copy_process(CLONE_PARENT) race with the exiting ->real_parentEddy Wu1-5/+5
commit b4e00444cab4c3f3fec876dc0cccc8cbb0d1a948 upstream. current->group_leader->exit_signal may change during copy_process() if current->real_parent exits. Move the assignment inside tasklist_lock to avoid the race. Signed-off-by: Eddy Wu <eddy_wu@trendmicro.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10vt: Disable KD_FONT_OP_COPYDaniel Vetter1-22/+2
commit 3c4e0dff2095c579b142d5a0693257f1c58b4804 upstream. It's buggy: On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote: > We recently discovered a slab-out-of-bounds read in fbcon in the latest > kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that > "fbcon_do_set_font" did not handle "vc->vc_font.data" and > "vc->vc_font.height" correctly, and the patch > <https://lkml.org/lkml/2020/9/27/223> for VT_RESIZEX can't handle this > issue. > > Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and > use KD_FONT_OP_SET again to set a large font.height for tty1. After that, > we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data > in "fbcon_do_set_font", while tty1 retains the original larger > height. Obviously, this will cause an out-of-bounds read, because we can > access a smaller vc_font.data with a larger vc_font.height. Further there was only one user ever. - Android's loadfont, busybox and console-tools only ever use OP_GET and OP_SET - fbset documentation only mentions the kernel cmdline font: option, not anything else. - systemd used OP_COPY before release 232 published in Nov 2016 Now unfortunately the crucial report seems to have gone down with gmane, and the commit message doesn't say much. But the pull request hints at OP_COPY being broken https://github.com/systemd/systemd/pull/3651 So in other words, this never worked, and the only project which foolishly every tried to use it, realized that rather quickly too. Instead of trying to fix security issues here on dead code by adding missing checks, fix the entire thing by removing the functionality. Note that systemd code using the OP_COPY function ignored the return value, so it doesn't matter what we're doing here really - just in case a lone server somewhere happens to be extremely unlucky and running an affected old version of systemd. The relevant code from font_copy_to_all_vcs() in systemd was: /* copy font from active VT, where the font was uploaded to */ cfo.op = KD_FONT_OP_COPY; cfo.height = vcs.v_active-1; /* tty1 == index 0 */ (void) ioctl(vcfd, KDFONTOP, &cfo); Note this just disables the ioctl, garbage collecting the now unused callbacks is left for -next. v2: Tetsuo found the old mail, which allowed me to find it on another archive. Add the link too. Acked-by: Peilin Ye <yepeilin.cs@gmail.com> Reported-by: Minh Yuan <yuanmingbuaa@gmail.com> References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html References: https://github.com/systemd/systemd/pull/3651 Cc: Greg KH <greg@kroah.com> Cc: Peilin Ye <yepeilin.cs@gmail.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-11-10ACPI: NFIT: Fix comparison to '-ENXIO'Zhang Qilong1-1/+1
[ Upstream commit 85f971b65a692b68181438e099b946cc06ed499b ] Initial value of rc is '-ENXIO', and we should use the initial value to check it. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Reviewed-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Reviewed-by: Vishal Verma <vishal.l.verma@intel.com> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10vsock: use ns_capable_noaudit() on socket createJeff Vander Stoep1-1/+1
[ Upstream commit af545bb5ee53f5261db631db2ac4cde54038bdaf ] During __vsock_create() CAP_NET_ADMIN is used to determine if the vsock_sock->trusted should be set to true. This value is used later for determing if a remote connection should be allowed to connect to a restricted VM. Unfortunately, if the caller doesn't have CAP_NET_ADMIN, an audit message such as an selinux denial is generated even if the caller does not want a trusted socket. Logging errors on success is confusing. To avoid this, switch the capable(CAP_NET_ADMIN) check to the noaudit version. Reported-by: Roman Kiryanov <rkir@google.com> https://android-review.googlesource.com/c/device/generic/goldfish/+/1468545/ Signed-off-by: Jeff Vander Stoep <jeffv@google.com> Reviewed-by: James Morris <jamorris@linux.microsoft.com> Link: https://lore.kernel.org/r/20201023143757.377574-1-jeffv@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10scsi: core: Don't start concurrent async scan on same hostMing Lei1-3/+4
[ Upstream commit 831e3405c2a344018a18fcc2665acc5a38c3a707 ] The current scanning mechanism is supposed to fall back to a synchronous host scan if an asynchronous scan is in progress. However, this rule isn't strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when checking shost->async_scan. When scsi_scan_host() is called concurrently, two async scans on same host can be started and a hang in do_scan_async() is observed. Fixes this issue by checking & setting shost->async_scan atomically with shost->scan_mutex. Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com Cc: Christoph Hellwig <hch@lst.de> Cc: Ewan D. Milne <emilne@redhat.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Ming Lei <ming.lei@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10of: Fix reserved-memory overlap detectionVincent Whitchurch1-2/+11
[ Upstream commit ca05f33316559a04867295dd49f85aeedbfd6bfd ] The reserved-memory overlap detection code fails to detect overlaps if either of the regions starts at address 0x0. The code explicitly checks for and ignores such regions, apparently in order to ignore dynamically allocated regions which have an address of 0x0 at this point. These dynamically allocated regions also have a size of 0x0 at this point, so fix this by removing the check and sorting the dynamically allocated regions ahead of any static regions at address 0x0. For example, there are two overlaps in this case but they are not currently reported: foo@0 { reg = <0x0 0x2000>; }; bar@0 { reg = <0x0 0x1000>; }; baz@1000 { reg = <0x1000 0x1000>; }; quux { size = <0x1000>; }; but they are after this patch: OF: reserved mem: OVERLAP DETECTED! bar@0 (0x00000000--0x00001000) overlaps with foo@0 (0x00000000--0x00002000) OF: reserved mem: OVERLAP DETECTED! foo@0 (0x00000000--0x00002000) overlaps with baz@1000 (0x00001000--0x00002000) Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Link: https://lore.kernel.org/r/ded6fd6b47b58741aabdcc6967f73eca6a3f311e.1603273666.git-series.vincent.whitchurch@axis.com Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10x86/kexec: Use up-to-dated screen_info copy to fill boot paramsKairui Song1-2/+1
[ Upstream commit afc18069a2cb7ead5f86623a5f3d4ad6e21f940d ] kexec_file_load() currently reuses the old boot_params.screen_info, but if drivers have change the hardware state, boot_param.screen_info could contain invalid info. For example, the video type might be no longer VGA, or the frame buffer address might be changed. If the kexec kernel keeps using the old screen_info, kexec'ed kernel may attempt to write to an invalid framebuffer memory region. There are two screen_info instances globally available, boot_params.screen_info and screen_info. Later one is a copy, and is updated by drivers. So let kexec_file_load use the updated copy. [ mingo: Tidied up the changelog. ] Signed-off-by: Kairui Song <kasong@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Link: https://lore.kernel.org/r/20201014092429.1415040-2-kasong@redhat.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10ARM: dts: sun4i-a10: fix cpu_alert temperatureClément Péron1-1/+1
[ Upstream commit dea252fa41cd8ce332d148444e4799235a8a03ec ] When running dtbs_check thermal_zone warn about the temperature declared. thermal-zones: cpu-thermal:trips:cpu-alert0:temperature:0:0: 850000 is greater than the maximum of 200000 It's indeed wrong the real value is 85°C and not 850°C. Signed-off-by: Clément Péron <peron.clem@gmail.com> Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201003100332.431178-1-peron.clem@gmail.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-11-10tracing: Fix out of bounds write in get_trace_bufQiujun Huang1-1/+1
commit c1acb4ac1a892cf08d27efcb964ad281728b0545 upstream. The nesting count of trace_printk allows for 4 levels of nesting. The nesting counter starts at zero and is incremented before being used to retrieve the current context's buffer. But the index to the buffer uses the nesting counter after it was incremented, and not its original number, which in needs to do. Link: https://lkml.kernel.org/r/20201029161905.4269-1-hqjagain@gmail.com Cc: stable@vger.kernel.org Fixes: 3d9622c12c887 ("tracing: Add barrier to trace_printk() buffer nesting modification") Signed-off-by: Qiujun Huang <hqjagain@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-15 03:24:07 +0300