summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-06-02i2c: designware-pci: Add Haswell PCI IDsMika Westerberg1-0/+22
Intel Haswell has the same I2C host controller than Baytrail and it can also be enumerated as a PCI device. Add the PCI IDs to the driver list. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: designware: Add runtime PM hooksMika Westerberg1-7/+5
It is possible that after entering runtime PM suspend the controller context is lost due the fact that its power is removed. This happens for example on Asus T100, an Intel Baytrail based tablet/laptop. In order to get the controller back to functional state, we need to implement runtime PM hooks which will re-initialize the hardware during runtime PM resume. We can re-use the existing system suspend hooks as the steps to resume/suspend the controller are the same. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: designware: Disable device on system suspendMika Westerberg1-0/+1
Userspace can initiate system suspend on arbitrary times which means that device drivers must make sure that their device gets quiesced before system suspend is entered. Therefore disable the I2C host controller in the driver system suspend hook. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: nuc900: remove driverWolfram Sang3-717/+0
Arnd said in another patch: "As far as I can tell, this driver must have produced this error for as long as it has been merged into the mainline kernel, but it was never part of the normal build tests: drivers/i2c/busses/i2c-nuc900.c: In function 'nuc900_i2c_probe': drivers/i2c/busses/i2c-nuc900.c:601:17: error: request for member 'apbfreq' in something not a structure or union ret = (i2c->clk.apbfreq)/(pdata->bus_freq * 5) - 1; ^ This is an attempt to get the driver to build and possibly work correctly, although I do wonder whether we should just remove it, as it has clearly never worked." I agree with removing it since nobody showed interest in Arnd's fixup patch. Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: Wan ZongShun <mcuos.com@gmail.org> Acked-by: Arnd Bergmann <arnd@arndb.de>
2014-06-02i2c: imx: update i2c clock divider for each transactionFugang Duan1-44/+49
Since IMX serial SOCs support low bus freq mode, some clocks freq may change to save power. I2C needs to check the clock source and update the divider. For example: i.MX6SL I2C clk is from IPG_PERCLK which is sourced from IPG_CLK. Under normal operation, IPG_CLK is 66MHz, ipg_perclk is at 22MHz. In low bus freq mode, IPG_CLK is at 12MHz and IPG_PERCLK is down to 4MHz. So the I2C driver must update the divider register for each transaction when the current IPG_PERCLK is not equal to the clock of previous transaction. Signed-off-by: Fugang Duan <B38611@freescale.com> [wsa: removed an outdated comment and simplified debug output] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: imx: fix the i2c bus hang issue when do repeat restartFugang Duan1-11/+30
Test i2c device Maxim max44009, datasheet is located at: http://www.maximintegrated.com/datasheet/index.mvp/id/7175 The max44009 support repeat operation like: read -> repeat restart -> read/write The current i2c imx host controller driver don't support this operation that causes i2c bus hang due to "MTX" is cleared in .i2c_imx_read(). If "read" is the last message there have no problem, so the current driver supports all SMbus operation like: write -> repeat restart -> read/write IMX i2c controller for master receiver has some limitation: - If it is the last byte for one operation, it must generate STOP signal before read I2DR to prevent controller from generating another clock cycle. - If it is the last byte in the read, and then do repeat restart, it must set "MTX" before read I2DR to prevent controller from generating another extra clock cycle. The patch is to fix the issue. Signed-off-by: Fugang Duan <B38611@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: update copyright and license informationWolfram Sang1-8/+6
Make clear that the driver is GPL v2 only. Remove FSF address. Remove filename in comment. Update copyright information. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: janitorial cleanup after refactoringWolfram Sang1-45/+5
Remove some obvious comments, remove some superfluous debug output (the error code carries the same information), some white space fixing... Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: reuse status bits as enable bitsWolfram Sang1-13/+4
Status register and enable register are identical regarding their layout. Use the bit definitions for both. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: remove spinlockWolfram Sang1-22/+0
The i2c core has per-adapter locks, so no need to protect again. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: refactor status bit handlingWolfram Sang1-13/+7
The old macros made it harder to see what was actually happening. Replace them with something more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: refactor setting up msgWolfram Sang1-25/+5
Setting up a read or write message is similar enough to be done in one function. Also, move a helper function into the new function since it is only used here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: check bus free before first messageWolfram Sang1-11/+5
We should always check if the bus is free, independently if it is a read or write. It should be done before the first message, though. After that, we ourselves keep the bus busy. Remove a 'ret' assignment which only silenced a build warning. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: refactor irq state machineWolfram Sang1-32/+7
Remove the seperate functions and use designated constants. As readable but less overhead. Actually, this is even more readable since the old function used a mix of "=" and "|=". Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: refactor bus state machineWolfram Sang1-27/+10
Remove the seperate functions and use designated constants. As readable but less overhead. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: no need to store irq numberWolfram Sang1-5/+4
We use devm, so irq number is only needed during probe. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: not everything needs to be a functionWolfram Sang1-11/+3
Very basic operations, just called once, can also go to the caller. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: sh_mobile: add compatibles for additional SoCWolfram Sang1-0/+3
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-06-02i2c: rcar: add compatibles for additional SoCWolfram Sang2-0/+6
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22ARM: sunxi: dt: Convert to the new i2c compatiblesMaxime Ripard4-14/+14
Switch the device tree to the new compatibles introduced in the i2c drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: gpio: Use devm_gpio_request()Jingoo Han1-18/+7
Use devm_gpio_request() to make cleanup paths simpler. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Reviewed-by: Violeta Menendez <violeta.menendez@codethink.co.uk> Reviewed-by: Ian Molton <ian.molton@codethink.co.uk> Tested-by: Violeta Menendez <violeta.menendez@codethink.co.uk> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: eg20t: Fix Kconfig dependenciesJean Delvare1-1/+1
The i2c-eg20t driver is for a companion chip to the Intel Atom E600 series processors. These are 32-bit x86 processors so the driver is only needed on X86_32. Add COMPILE_TEST as an alternative, so that the driver can still be build-tested elsewhere. Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: fix clock calculation for newer SoCsWolfram Sang1-10/+38
Newer SoCs have so fast input clocks that the ICCL/H registers only count every second clock to have a meaningful 9-bit range. The driver was already prepared for that happening, but didn't use it so far. Add the proper DT configuration for SoCs that need it. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: check timing parameters for valid rangeWolfram Sang1-4/+13
Due to misconfiguration, it can happen that the calculated timing parameters are out of range. Bail out if that happens. We can also simplify some logic later because of the verified value. Also, make the printouts of the values more precise by adding the hex-prefixes. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: bail out on errors when initializingWolfram Sang1-5/+7
sh_mobile_i2c_init() could detect wrong settings, but didn't bail out, so it would continue unconfigured. Fix this. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: remove superfluous offset parameterWolfram Sang1-9/+6
Following the KISS principle, remove unneeded stuff. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: devm conversion, irq setupWolfram Sang1-41/+15
This is what devm was made for. No rollback mechanism needed, remove the hook parameter from the irq setup function and simplify it. While we are here change some variables to proper types. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: devm conversion, low hanging fruitsWolfram Sang1-31/+10
Convert the easy parts to devm. irqs will be converted in a seperate patch to keep diffs readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: add devicetree documentationWolfram Sang1-0/+26
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: honor DT bus speed settingsWolfram Sang1-1/+4
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: improve error handlingWolfram Sang1-16/+9
Use standard i2c error codes for i2c failures. Also, don't print something on timeout since it happens regularly with i2c. Simplify some, logic, too. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: sh_mobile: replace magic hex values with constantsWolfram Sang1-5/+6
No functional change, binaries are identical. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: exynos5: add support for HSI2C on Exynos5260 SoCNaveen Krishna Ch2-14/+64
HSI2C module on Exynos5260 differs from current modules in following ways: 1. HSI2C on Exynos5260 has fifo_depth of 16bytes 2. Module needs to be reset as a part of init sequence. Hence, Following changes are involved. 1. Add a new compatible string and Updates the Documentation dt bindings. 2. Introduce a variant struct to support the changes in H/W 3. Reset the module during init. Thus, bringing the module back to default state irrespective of what firmware did with it. Signed-off-by: Naveen Krishna Chatradhi <ch.naveen@samsung.com> Signed-off-by: Pankaj Dubey <pankaj.dubey@samsung.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: mux: Add more warnings to i2c-arb-gpio-challenge docsDoug Anderson1-0/+6
This adds some more warnings to the i2c-arb-gpio-challenge docs to help encourage people not to use it in their designs unless they have no choice. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: ali1563: fix checkpatch.pl issuesRichard Leitner1-37/+45
Fixed most checkpatch.pl issues Signed-off-by: Richard Leitner <me@g0hl1n.net> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: nomadik: Fixup system suspendUlf Hansson1-7/+7
For !CONFIG_PM_RUNTIME, the device were never put back into active state while resuming. For CONFIG_PM_RUNTIME, we blindly trusted the device to be inactive while we were about to handle it at suspend late, which is just too optimistic. Even if the driver uses pm_runtime_put_sync() after each tranfer to return it's runtime PM resources, there are no guarantees this will actually mean the device will inactivated. The reason is that the PM core will prevent runtime suspend during system suspend, and thus when a transfer occurs during the early phases of system suspend the device will be kept active after the transfer. To handle both issues above, use pm_runtime_force_suspend|resume() from the system suspend|resume callbacks. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: imx: add SMBus block read supportKaushal Butala1-3/+28
The smbus block read is not currently supported for imx i2c devices. This patchset adds the support to imx i2c bus so that blocks of data can be read using SMbus block reads.(using i2c_smbus_read_block_data() function from the i2c_core.c.). Tested with 3.10.9 kernel. Reviewed-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Kaushal Butala <kaushalkernelmailinglist@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22i2c: mv64xxx: Change i2c compatibles for sunxiMaxime Ripard2-2/+2
The Allwinner A10 compatibles were following a slightly different compatible patterns than the rest of the SoCs for historical reasons. Move to the other pattern for consistency across all Allwinner Socs. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> [wsa: dropped binding OK as per http://lists.infradead.org/pipermail/linux-arm-kernel/2014-February/229438.html] Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-05-22Linux 3.15-rc6v3.15-rc6Linus Torvalds1-1/+1
2014-05-22Merge branch 'merge' of ↵Linus Torvalds2-4/+2
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc Pull two powerpc fixes from Ben Herrenschmidt: "Here are a couple of fixes for 3.15. One from Anton fixes a nasty regression I introduced when trying to fix a loss of irq_work whose consequences is that we can completely lose timer interrupts on a CPU... not pretty. The other one is a change to our PCIe reset hook to use a firmware call instead of direct config space accesses to trigger a fundamental reset on the root port. This is necessary so that the FW gets a chance to disable the link down error monitoring, which would otherwise trip and cause subsequent fatal EEH error" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc: irq work racing with timer interrupt can result in timer interrupt hang powerpc/powernv: Reset root port in firmware
2014-05-22Merge branch 'for-linus' of ↵Linus Torvalds2-2/+6
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs Pull two btrfs fixes from Chris Mason: "This has two fixes that we've been testing for 3.16, but since both are safe and fix real bugs, it makes sense to send for 3.15 instead" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: send, fix incorrect ref access when using extrefs Btrfs: fix EIO on reading file after ioctl clone works on it
2014-05-22Merge branch 'for-linus' of ↵Linus Torvalds2-1/+24
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client Pull two ceph fixes from Sage Weil: "The first patch fixes a problem when we have a page count of 0 for sendpage which is triggered by zfs. The second fixes a bug in CRUSH that was resolved in the userland code a while back but fell through the cracks on the kernel side" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: crush: decode and initialize chooseleaf_vary_r libceph: fix corruption when using page_count 0 page in rbd
2014-05-22Merge tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfsLinus Torvalds5-25/+27
Pull xfs fixes from Dave Chinner: "Code inspection of the XFS error number sign translations found a bunch of issues, including returning incorrectly signed errors for some data integrity operations. These leak to userspace and result in applications not getting the errors correctly reported. Hence they need fixing sooner rather than later. A couple of the bugs are in data integrity operations, a couple more are in the new COLLAPSE_RANGE code. One of these came in through a recent ext4 merge and so I had to update the base tree to 3.15-rc5 before fixing the issues" * tag 'xfs-for-linus-3.15-rc6' of git://oss.sgi.com/xfs/xfs: xfs: list_lru_init returns a negative error xfs: negate xfs_icsb_init_counters error value xfs: negate mount workqueue init error value xfs: fix wrong err sign on xfs_set_acl() xfs: fix wrong errno from xfs_initxattrs xfs: correct error sign on COLLAPSE_RANGE errors xfs: xfs_commit_metadata returns wrong errno xfs: fix incorrect error sign in xfs_file_aio_read xfs: xfs_dir_fsync() returns positive errno
2014-05-22Merge branch 'renameat2' of ↵Linus Torvalds10-5/+16
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull renameat2 arch support from Miklos Szeredi: "I've collected architecture patches for the renameat2 syscall that maintainers acked and/or asked me to queue. This adds architecture support for the renameat2 syscall to m68k, parisc, ia64 and through asm-generic to arc, arm64, c6x, hexagon, metag, openrisc, score, tile, unicore32" * 'renameat2' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: scripts/checksyscalls.sh: Make renameat optional asm-generic: Add renameat2 syscall ia64: add renameat2 syscall parisc: add renameat2 syscall m68k: add renameat2 syscall
2014-05-21Merge tag 'iommu-fixes-v3.15-rc5' of ↵Linus Torvalds3-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull iommu fixes from Joerg Roedel: "Three fixes for the AMD IOMMU driver: - fix a locking issue around get_user_pages() - fix two issues with device aliasing and exclusion range handling" * tag 'iommu-fixes-v3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: fix enabling exclusion range for an exact device iommu/amd: Take mmap_sem when calling get_user_pages iommu/amd: Fix interrupt remapping for aliased devices
2014-05-21Merge tag 'stable/for-linus-3.15-rc5-tag' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft Pull iscsi_ibft fix from Konrad Rzeszutek Wilk: "Fix iBFT regression on Broadcom NICs introduced in 3.2" * tag 'stable/for-linus-3.15-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/ibft: iscsi_ibft: Fix finding Broadcom specific ibft sign
2014-05-21Merge tag 'renesas-sh-drivers-for-v3.15' of ↵Linus Torvalds3-8/+28
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas Pull SH driver fix from Simon Horman: "Compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI This resolves a regression introduced in v3.14 by commit bf98c1eac1d4 ("ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY")" * tag 'renesas-sh-drivers-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: drivers: sh: compile drivers/sh/pm_runtime.c if ARCH_SHMOBILE_MULTI
2014-05-21Merge branch 'v4l_for_linus' of ↵Linus Torvalds16-47/+132
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Most of the changes are drivers fixes (rtl28xuu, fc2580, ov7670, davinci, gspca, s5p-fimc and s5c73m3). There is also a compat32 fix and one infoleak fixup at the media controller" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode [media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space [media] media-device: fix infoleak in ioctl media_enum_entities() [media] fc2580: fix tuning failure on 32-bit arch [media] Prefer gspca_sonixb over sn9c102 for all devices [media] media: davinci: vpfe: make sure all the buffers unmapped and released [media] staging: media: davinci: vpfe: make sure all the buffers are released [media] media: davinci: vpbe_display: fix releasing of active buffers [media] media: davinci: vpif_display: fix releasing of active buffers [media] media: davinci: vpif_capture: fix releasing of active buffers [media] s5p-fimc: Fix YUV422P depth [media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function [media] rtl28xxu: silence error log about disabled rtl2832_sdr module [media] rtl28xxu: do not hard depend on staging SDR module
2014-05-21Merge tag 'staging-3.15-rc6' of ↵Linus Torvalds5-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are five staging driver fixes for 3.15-rc6 that resolve some reported issues. They are for the imx and rtl8723au drivers" * tag 'staging-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: rtl8723au: Do not reset wdev->iftype in netdev_close() staging: rtl8723au: Use correct pipe type for USB interrupts imx-drm: imx-tve: correct DDC property name to 'ddc-i2c-bus' imx-drm: imx-drm-core: skip components whose parent device is disabled imx-drm: imx-drm-core: fix imx_drm_encoder_get_mux_id
2014-05-21Merge tag 'driver-core-3.15-rc6' of ↵Linus Torvalds4-10/+32
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are two driver core (well, sysfs) fixes for 3.15-rc6 that resolve some reported issues and a regression from 3.13" * tag 'driver-core-3.15-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: sysfs: make sure read buffer is zeroed kernfs, sysfs, cgroup: restrict extra perm check on open to sysfs
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-24 22:27:25 +0300