summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-10-13Linux 4.9.133v4.9.133Greg Kroah-Hartman1-1/+1
2018-10-13x86/fpu: Finish excising 'eagerfpu'Andy Lutomirski5-33/+1
commit e63650840e8b053aa09ad934877e87e9941ed135 upstream. Now that eagerfpu= is gone, remove it from the docs and some comments. Also sync the changes to tools/. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Rik van Riel <riel@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/cf430dd4481d41280e93ac6cf0def1007a67fc8e.1476740397.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13Revert "perf: sync up x86/.../cpufeatures.h"Greg Kroah-Hartman1-1/+1
This reverts commit f09a7b0eead737b33d940bf5c2509ca1441e9590 Daniel writes: Because the modification in this patch actually belongs to e63650840e8b ("x86/fpu: Finish excising 'eagerfpu'") Reported-by: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13x86/fpu: Remove struct fpu::counterRik van Riel4-21/+1
commit 3913cc3507575273beb165a5e027a081913ed507 upstream. With the lazy FPU code gone, we no longer use the counter field in struct fpu for anything. Get rid it. Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-6-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Cc: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13x86/fpu: Remove use_eager_fpu()Andy Lutomirski7-105/+13
commit c592b57347069abfc0dcad3b3a302cf882602597 upstream. This removes all the obvious code paths that depend on lazy FPU mode. It shouldn't change the generated code at all. Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Rik van Riel <riel@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-5-git-send-email-riel@redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Daniel Sangorrin <daniel.sangorrin@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ebtables: arpreply: Add the standard target sanity checkGao Feng2-0/+8
commit c953d63548207a085abcb12a15fefc8a11ffdf0a upstream. The info->target comes from userspace and it would be used directly. So we need to add the sanity check to make sure it is a valid standard target, although the ebtables tool has already checked it. Kernel needs to validate anything coming from userspace. If the target is set as an evil value, it would break the ebtables and cause a panic. Because the non-standard target is treated as one offset. Now add one helper function ebt_invalid_target, and we would replace the macro INVALID_TARGET later. Signed-off-by: Gao Feng <gfree.wind@vip.163.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Cc: Loic <hackurx@opensec.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ath10k: fix scan crash due to incorrect length calculationZhi Chen1-4/+4
commit c8291988806407e02a01b4b15b4504eafbcc04e0 upstream. Length of WMI scan message was not calculated correctly. The allocated buffer was smaller than what we expected. So WMI message corrupted skb_info, which is at the end of skb->data. This fix takes TLV header into account even if the element is zero-length. Crash log: [49.629986] Unhandled kernel unaligned access[#1]: [49.634932] CPU: 0 PID: 1176 Comm: logd Not tainted 4.4.60 #180 [49.641040] task: 83051460 ti: 8329c000 task.ti: 8329c000 [49.646608] $ 0 : 00000000 00000001 80984a80 00000000 [49.652038] $ 4 : 45259e89 8046d484 8046df30 8024ba70 [49.657468] $ 8 : 00000000 804cc4c0 00000001 20306320 [49.662898] $12 : 33322037 000110f2 00000000 31203930 [49.668327] $16 : 82792b40 80984a80 00000001 804207fc [49.673757] $20 : 00000000 0000012c 00000040 80470000 [49.679186] $24 : 00000000 8024af7c [49.684617] $28 : 8329c000 8329db88 00000001 802c58d0 [49.690046] Hi : 00000000 [49.693022] Lo : 453c0000 [49.696013] epc : 800efae4 put_page+0x0/0x58 [49.700615] ra : 802c58d0 skb_release_data+0x148/0x1d4 [49.706184] Status: 1000fc03 KERNEL EXL IE [49.710531] Cause : 00800010 (ExcCode 04) [49.714669] BadVA : 45259e89 [49.717644] PrId : 00019374 (MIPS 24Kc) Signed-off-by: Zhi Chen <zhichen@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Cc: Brian Norris <briannorris@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ubifs: Check for name being NULL while mountingRichard Weinberger1-0/+3
commit 37f31b6ca4311b94d985fb398a72e5399ad57925 upstream. The requested device name can be NULL or an empty string. Check for that and refuse to continue. UBIFS has to do this manually since we cannot use mount_bdev(), which checks for this condition. Fixes: 1e51764a3c2ac ("UBIFS: add new flash file system") Reported-by: syzbot+38bd0f7865e5c6379280@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ucma: fix a use-after-free in ucma_resolve_ip()Cong Wang1-0/+2
commit 5fe23f262e0548ca7f19fb79f89059a60d087d22 upstream. There is a race condition between ucma_close() and ucma_resolve_ip(): CPU0 CPU1 ucma_resolve_ip(): ucma_close(): ctx = ucma_get_ctx(file, cmd.id); list_for_each_entry_safe(ctx, tmp, &file->ctx_list, list) { mutex_lock(&mut); idr_remove(&ctx_idr, ctx->id); mutex_unlock(&mut); ... mutex_lock(&mut); if (!ctx->closing) { mutex_unlock(&mut); rdma_destroy_id(ctx->cm_id); ... ucma_free_ctx(ctx); ret = rdma_resolve_addr(); ucma_put_ctx(ctx); Before idr_remove(), ucma_get_ctx() could still find the ctx and after rdma_destroy_id(), rdma_resolve_addr() may still access id_priv pointer. Also, ucma_put_ctx() may use ctx after ucma_free_ctx() too. ucma_close() should call ucma_put_ctx() too which tests the refcnt and waits for the last one releasing it. The similar pattern is already used by ucma_destroy_id(). Reported-and-tested-by: syzbot+da2591e115d57a9cbb8b@syzkaller.appspotmail.com Reported-by: syzbot+cfe3c1e8ef634ba8964b@syzkaller.appspotmail.com Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Doug Ledford <dledford@redhat.com> Cc: Leon Romanovsky <leon@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13f2fs: fix invalid memory accessChao Yu1-4/+5
commit d3f07c049dab1a3f1740f476afd3d5e5b738c21c upstream. syzbot found the following crash on: HEAD commit: d9bd94c0bcaa Add linux-next specific files for 20180801 git tree: linux-next console output: https://syzkaller.appspot.com/x/log.txt?x=1001189c400000 kernel config: https://syzkaller.appspot.com/x/.config?x=cc8964ea4d04518c dashboard link: https://syzkaller.appspot.com/bug?extid=c966a82db0b14aa37e81 compiler: gcc (GCC) 8.0.1 20180413 (experimental) Unfortunately, I don't have any reproducer for this crash yet. IMPORTANT: if you fix the bug, please add the following tag to the commit: Reported-by: syzbot+c966a82db0b14aa37e81@syzkaller.appspotmail.com loop7: rw=12288, want=8200, limit=20 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. openvswitch: netlink: Message has 8 unknown bytes. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN CPU: 1 PID: 7615 Comm: syz-executor7 Not tainted 4.18.0-rc7-next-20180801+ #29 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: f2fs_get_valid_checkpoint+0x436/0x1ec0 fs/f2fs/checkpoint.c:860 f2fs_fill_super+0x2d42/0x8110 fs/f2fs/super.c:2883 mount_bdev+0x314/0x3e0 fs/super.c:1344 f2fs_mount+0x3c/0x50 fs/f2fs/super.c:3133 legacy_get_tree+0x131/0x460 fs/fs_context.c:729 vfs_get_tree+0x1cb/0x5c0 fs/super.c:1743 do_new_mount fs/namespace.c:2603 [inline] do_mount+0x6f2/0x1e20 fs/namespace.c:2927 ksys_mount+0x12d/0x140 fs/namespace.c:3143 __do_sys_mount fs/namespace.c:3157 [inline] __se_sys_mount fs/namespace.c:3154 [inline] __x64_sys_mount+0xbe/0x150 fs/namespace.c:3154 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x45943a Code: b8 a6 00 00 00 0f 05 48 3d 01 f0 ff ff 0f 83 bd 8a fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 0f 83 9a 8a fb ff c3 66 0f 1f 84 00 00 00 00 00 RSP: 002b:00007f36a61d4a88 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00007f36a61d4b30 RCX: 000000000045943a RDX: 00007f36a61d4ad0 RSI: 0000000020000100 RDI: 00007f36a61d4af0 RBP: 0000000020000100 R08: 00007f36a61d4b30 R09: 00007f36a61d4ad0 R10: 0000000000000000 R11: 0000000000000206 R12: 0000000000000013 R13: 0000000000000000 R14: 00000000004c8ea0 R15: 0000000000000000 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) ---[ end trace bd8550c129352286 ]--- RIP: 0010:__read_once_size include/linux/compiler.h:188 [inline] RIP: 0010:compound_head include/linux/page-flags.h:142 [inline] RIP: 0010:PageLocked include/linux/page-flags.h:272 [inline] RIP: 0010:f2fs_put_page fs/f2fs/f2fs.h:2011 [inline] RIP: 0010:validate_checkpoint+0x66d/0xec0 fs/f2fs/checkpoint.c:835 Code: e8 58 05 7f fe 4c 8d 6b 80 4d 8d 74 24 08 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 c6 04 02 00 4c 89 f2 48 c1 ea 03 <80> 3c 02 00 0f 85 f4 06 00 00 4c 89 ea 4d 8b 7c 24 08 48 b8 00 00 RSP: 0018:ffff8801937cebe8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8801937cef30 RCX: ffffc90006035000 RDX: 0000000000000000 RSI: ffffffff82fd9658 RDI: 0000000000000005 netlink: 65342 bytes leftover after parsing attributes in process `syz-executor4'. RBP: ffff8801937cef58 R08: ffff8801ab254700 R09: fffff94000d9e026 openvswitch: netlink: Message has 8 unknown bytes. R10: fffff94000d9e026 R11: ffffea0006cf0137 R12: fffffffffffffffb R13: ffff8801937ceeb0 R14: 0000000000000003 R15: ffff880193419b40 FS: 00007f36a61d5700(0000) GS:ffff8801db100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc04ff93000 CR3: 00000001d0562000 CR4: 00000000001426e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 In validate_checkpoint(), if we failed to call get_checkpoint_version(), we will pass returned invalid page pointer into f2fs_put_page, cause accessing invalid memory, this patch tries to handle error path correctly to fix this issue. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2018-10-13x86/mm: Expand static page table for fixmap spaceFeng Tang5-7/+39
commit 05ab1d8a4b36ee912b7087c6da127439ed0a903e upstream. We met a kernel panic when enabling earlycon, which is due to the fixmap address of earlycon is not statically setup. Currently the static fixmap setup in head_64.S only covers 2M virtual address space, while it actually could be in 4M space with different kernel configurations, e.g. when VSYSCALL emulation is disabled. So increase the static space to 4M for now by defining FIXMAP_PMD_NUM to 2, and add a build time check to ensure that the fixmap is covered by the initial static page tables. Fixes: 1ad83c858c7d ("x86_64,vsyscall: Make vsyscall emulation configurable") Suggested-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Feng Tang <feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: kernel test robot <rong.a.chen@intel.com> Reviewed-by: Juergen Gross <jgross@suse.com> (Xen parts) Cc: H Peter Anvin <hpa@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andy Lutomirsky <luto@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180920025828.23699-1-feng.tang@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ARC: clone syscall to setp r25 as thread pointerVineet Gupta1-0/+20
commit c58a584f05e35d1d4342923cd7aac07d9c3d3d16 upstream. Per ARC TLS ABI, r25 is designated TP (thread pointer register). However so far kernel didn't do any special treatment, like setting up usermode r25, even for CLONE_SETTLS. We instead relied on libc runtime to do this, in say clone libc wrapper [1]. This was deliberate to keep kernel ABI agnostic (userspace could potentially change TP, specially for different ARC ISA say ARCompact vs. ARCv2 with different spare registers etc) However userspace setting up r25, after clone syscall opens a race, if child is not scheduled and gets a signal instead. It starts off in userspace not in clone but in a signal handler and anything TP sepcific there such as pthread_self() fails which showed up with uClibc testsuite nptl/tst-kill6 [2] Fix this by having kernel populate r25 to TP value. So this locks in ABI, but it was not going to change anyways, and fwiw is same for both ARCompact (arc700 core) and ARCvs (HS3x cores) [1] https://cgit.uclibc-ng.org/cgi/cgit/uclibc-ng.git/tree/libc/sysdeps/linux/arc/clone.S [2] https://github.com/wbx-github/uclibc-ng-test/blob/master/test/nptl/tst-kill6.c Fixes: ARC STAR 9001378481 Cc: stable@vger.kernel.org Reported-by: Nikita Sobolev <sobolev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13powerpc/fadump: Return error when fadump registration failsMichal Suchanek1-8/+15
commit 98b8cd7f75643e0a442d7a4c1cef2c9d53b7e92b upstream. - log an error message when registration fails and no error code listed in the switch is returned - translate the hv error code to posix error code and return it from fw_register - return the posix error code from fw_register to the process writing to sysfs - return EEXIST on re-registration - return success on deregistration when fadump is not registered - return ENODEV when no memory is reserved for fadump Signed-off-by: Michal Suchanek <msuchanek@suse.de> Tested-by: Hari Bathini <hbathini@linux.vnet.ibm.com> [mpe: Use pr_err() to shrink the error print] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Cc: Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ath10k: fix kernel panic issue during pci probeYu Wang1-2/+10
commit 50e79e25250bf928369996277e85b00536b380c7 upstream. If device gone during chip reset, ar->normal_mode_fw.board is not initialized, but ath10k_debug_print_hwfw_info() will try to access its member, which will cause 'kernel NULL pointer' issue. This was found using a faulty device (pci link went down sometimes) in a random insmod/rmmod/other-op test. To fix it, check ar->normal_mode_fw.board before accessing the member. pci 0000:02:00.0: BAR 0: assigned [mem 0xf7400000-0xf75fffff 64bit] ath10k_pci 0000:02:00.0: enabling device (0000 -> 0002) ath10k_pci 0000:02:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0 ath10k_pci 0000:02:00.0: failed to read device register, device is gone ath10k_pci 0000:02:00.0: failed to wait for target init: -5 ath10k_pci 0000:02:00.0: failed to warm reset: -5 ath10k_pci 0000:02:00.0: firmware crashed during chip reset ath10k_pci 0000:02:00.0: firmware crashed! (uuid 5d018951-b8e1-404a-8fde-923078b4423a) ath10k_pci 0000:02:00.0: (null) target 0x00000000 chip_id 0x00340aff sub 0000:0000 ath10k_pci 0000:02:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 ath10k_pci 0000:02:00.0: firmware ver api 0 features crc32 00000000 ... BUG: unable to handle kernel NULL pointer dereference at 00000004 ... Call Trace: [<fb4e7882>] ath10k_print_driver_info+0x12/0x20 [ath10k_core] [<fb62b7dd>] ath10k_pci_fw_crashed_dump+0x6d/0x4d0 [ath10k_pci] [<fb629f07>] ? ath10k_pci_sleep.part.19+0x57/0xc0 [ath10k_pci] [<fb62c8ee>] ath10k_pci_hif_power_up+0x14e/0x1b0 [ath10k_pci] [<c10477fb>] ? do_page_fault+0xb/0x10 [<fb4eb934>] ath10k_core_register_work+0x24/0x840 [ath10k_core] [<c18a00d8>] ? netlbl_unlhsh_remove+0x178/0x410 [<c10477f0>] ? __do_page_fault+0x480/0x480 [<c1068e44>] process_one_work+0x114/0x3e0 [<c1069d07>] worker_thread+0x37/0x4a0 [<c106e294>] kthread+0xa4/0xc0 [<c1069cd0>] ? create_worker+0x180/0x180 [<c106e1f0>] ? kthread_park+0x50/0x50 [<c18ab4f7>] ret_from_fork+0x1b/0x28 Code: 78 80 b8 50 09 00 00 00 75 5d 8d 75 94 c7 44 24 08 aa d7 52 fb c7 44 24 04 64 00 00 00 89 34 24 e8 82 52 e2 c5 8b 83 dc 08 00 00 <8b> 50 04 8b 08 31 c0 e8 20 57 e3 c5 89 44 24 10 8b 83 58 09 00 EIP: [<fb4e7754>]- ath10k_debug_print_board_info+0x34/0xb0 [ath10k_core] SS:ESP 0068:f4921d90 CR2: 0000000000000004 Signed-off-by: Yu Wang <yyuwang@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> [AmitP: Minor rebasing for 4.14.y and 4.9.y] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ath10k: fix use-after-free in ath10k_wmi_cmd_send_nowaitCarl Huang2-9/+5
commit 9ef0f58ed7b4a55da4a64641d538e0d9e46579ac upstream. The skb may be freed in tx completion context before trace_ath10k_wmi_cmd is called. This can be easily captured when KASAN(Kernel Address Sanitizer) is enabled. The fix is to move trace_ath10k_wmi_cmd before the send operation. As the ret has no meaning in trace_ath10k_wmi_cmd then, so remove this parameter too. Signed-off-by: Carl Huang <cjhuang@codeaurora.org> Tested-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13cgroup: Fix deadlock in cpu hotplug pathPrateek Sood1-1/+5
commit 116d2f7496c51b2e02e8e4ecdd2bdf5fb9d5a641 upstream. Deadlock during cgroup migration from cpu hotplug path when a task T is being moved from source to destination cgroup. kworker/0:0 cpuset_hotplug_workfn() cpuset_hotplug_update_tasks() hotplug_update_tasks_legacy() remove_tasks_in_empty_cpuset() cgroup_transfer_tasks() // stuck in iterator loop cgroup_migrate() cgroup_migrate_add_task() In cgroup_migrate_add_task() it checks for PF_EXITING flag of task T. Task T will not migrate to destination cgroup. css_task_iter_start() will keep pointing to task T in loop waiting for task T cg_list node to be removed. Task T do_exit() exit_signals() // sets PF_EXITING exit_task_namespaces() switch_task_namespaces() free_nsproxy() put_mnt_ns() drop_collected_mounts() namespace_unlock() synchronize_rcu() _synchronize_rcu_expedited() schedule_work() // on cpu0 low priority worker pool wait_event() // waiting for work item to execute Task T inserted a work item in the worklist of cpu0 low priority worker pool. It is waiting for expedited grace period work item to execute. This work item will only be executed once kworker/0:0 complete execution of cpuset_hotplug_workfn(). kworker/0:0 ==> Task T ==>kworker/0:0 In case of PF_EXITING task being migrated from source to destination cgroup, migrate next available task in source cgroup. Signed-off-by: Prateek Sood <prsood@codeaurora.org> Signed-off-by: Tejun Heo <tj@kernel.org> [AmitP: Upstream commit cherry-pick failed, so I picked the backported changes from CAF/msm-4.9 tree instead: https://source.codeaurora.org/quic/la/kernel/msm-4.9/commit/?id=49b74f1696417b270c89cd893ca9f37088928078] Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ext4: always verify the magic number in xattr blocksTheodore Ts'o1-3/+3
commit 513f86d73855ce556ea9522b6bfd79f87356dc3a upstream. If there an inode points to a block which is also some other type of metadata block (such as a block allocation bitmap), the buffer_verified flag can be set when it was validated as that other metadata block type; however, it would make a really terrible external attribute block. The reason why we use the verified flag is to avoid constantly reverifying the block. However, it doesn't take much overhead to make sure the magic number of the xattr block is correct, and this will avoid potential crashes. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> [Backported to 4.9: adjust context] Signed-off-by: Daniel Rosenberg <drosen@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13ext4: add corruption check in ext4_xattr_set_entry()Theodore Ts'o1-8/+14
commit 5369a762c882c0b6e9599e4ebbb3a9ba9eee7e2d upstream. In theory this should have been caught earlier when the xattr list was verified, but in case it got missed, it's simple enough to add check to make sure we don't overrun the xattr buffer. This addresses CVE-2018-10879. https://bugzilla.kernel.org/show_bug.cgi?id=200001 Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Andreas Dilger <adilger@dilger.ca> [bwh: Backported to 3.16: - Add inode parameter to ext4_xattr_set_entry() and update callers - Return -EIO instead of -EFSCORRUPTED on error - Adjust context] Signed-off-by: Ben Hutchings <ben@decadent.org.uk> [adjusted context for 4.9] Signed-off-by: Daniel Rosenberg <drosen@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13of: unittest: Disable interrupt node tests for old world MAC systemsGuenter Roeck1-9/+19
commit 8894891446c9380709451b99ab45c5c53adfd2fc upstream. On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Frank Rowand <frank.rowand@sony.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13tty: Drop tty->count on tty_reopen() failureDmitry Safonov1-3/+8
commit fe32416790093b31364c08395727de17ec96ace1 upstream. In case of tty_ldisc_reinit() failure, tty->count should be decremented back, otherwise we will never release_tty(). Tetsuo reported that it fixes noisy warnings on tty release like: pts pts4033: tty_release: tty->count(10529) != (#fd's(7) + #kopen's(0)) Fixes: commit 892d1fa7eaae ("tty: Destroy ldisc instance on hangup") Cc: stable@vger.kernel.org # v4.6+ Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Reviewed-by: Jiri Slaby <jslaby@suse.cz> Tested-by: Jiri Slaby <jslaby@suse.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13USB: serial: simple: add Motorola Tetra MTP6550 idJohan Hovold1-1/+2
commit f5fad711c06e652f90f581fc7c2caee327c33d31 upstream. Add device-id for the Motorola Tetra radio MTP6550. Bus 001 Device 004: ID 0cad:9012 Motorola CGISS Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0cad Motorola CGISS idProduct 0x9012 bcdDevice 24.16 iManufacturer 1 Motorola Solutions, Inc. iProduct 2 TETRA PEI interface iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 3 Generic Serial config bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0000 (Bus Powered) Reported-by: Hans Hult <hanshult35@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13usb: xhci-mtk: resume USB3 roothub firstChunfeng Yun1-2/+2
commit 555df5820e733cded7eb8d0bf78b2a791be51d75 upstream. Give USB3 devices a better chance to enumerate at USB3 speeds if they are connected to a suspended host. Porting from "671ffdff5b13 xhci: resume USB 3 roothub first" Cc: <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13xhci: Add missing CAS workaround for Intel Sunrise Point xHCIMathias Nyman1-0/+2
commit ffe84e01bb1b38c7eb9c6b6da127a6c136d251df upstream. The workaround for missing CAS bit is also needed for xHC on Intel sunrisepoint PCH. For more details see: Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13dm cache: fix resize crash if user doesn't reload cache tableMike Snitzer1-2/+7
commit 5d07384a666d4b2f781dc056bfeec2c27fbdf383 upstream. A reload of the cache's DM table is needed during resize because otherwise a crash will occur when attempting to access smq policy entries associated with the portion of the cache that was recently extended. The reason is cache-size based data structures in the policy will not be resized, the only way to safely extend the cache is to allow for a proper cache policy initialization that occurs when the cache table is loaded. For example the smq policy's space_init(), init_allocator(), calc_hotspot_params() must be sized based on the extended cache size. The fix for this is to disallow cache resizes of this pattern: 1) suspend "cache" target's device 2) resize the fast device used for the cache 3) resume "cache" target's device Instead, the last step must be a full reload of the cache's DM table. Fixes: 66a636356 ("dm cache: add stochastic-multi-queue (smq) policy") Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13dm cache metadata: ignore hints array being too small during resizeJoe Thornber1-2/+2
commit 4561ffca88c546f96367f94b8f1e4715a9c62314 upstream. Commit fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to on-disk superblock") enabled previously written policy hints to be used after a cache is reactivated. But in doing so the cache metadata's hint array was left exposed to out of bounds access because on resize the metadata's on-disk hint array wasn't ever extended. Fix this by ignoring that there are no on-disk hints associated with the newly added cache blocks. An expanded on-disk hint array is later rewritten upon the next clean shutdown of the cache. Fixes: fd2fa9541 ("dm cache metadata: save in-core policy_hint_size to on-disk superblock") Cc: stable@vger.kernel.org Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13PM / core: Clear the direct_complete flag on errorsRafael J. Wysocki1-1/+4
commit 69e445ab8b66a9f30519842ef18be555d3ee9b51 upstream. If __device_suspend() runs asynchronously (in which case the device passed to it is in dpm_suspended_list at that point) and it returns early on an error or pending wakeup, and the power.direct_complete flag has been set for the device already, the subsequent device_resume() will be confused by that and it will call pm_runtime_enable() incorrectly, as runtime PM has not been disabled for the device by __device_suspend(). To avoid that, clear power.direct_complete if __device_suspend() is not going to disable runtime PM for the device before returning. Fixes: aae4518b3124 (PM / sleep: Mechanism to avoid resuming runtime-suspended devices unnecessarily) Reported-by: Al Cooper <alcooperx@gmail.com> Tested-by: Al Cooper <alcooperx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Cc: 3.16+ <stable@vger.kernel.org> # 3.16+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13mac80211: fix setting IEEE80211_KEY_FLAG_RX_MGMT for AP mode keysFelix Fietkau1-1/+1
commit 211710ca74adf790b46ab3867fcce8047b573cd1 upstream. key->sta is only valid after ieee80211_key_link, which is called later in this function. Because of that, the IEEE80211_KEY_FLAG_RX_MGMT is never set when management frame protection is enabled. Fixes: e548c49e6dc6b ("mac80211: add key flag for management keys") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13PCI: Reprogram bridge prefetch registers on resumeDaniel Drake1-8/+19
commit 083874549fdfefa629dfa752785e20427dde1511 upstream. On 38+ Intel-based ASUS products, the NVIDIA GPU becomes unusable after S3 suspend/resume. The affected products include multiple generations of NVIDIA GPUs and Intel SoCs. After resume, nouveau logs many errors such as: fifo: fault 00 [READ] at 0000005555555000 engine 00 [GR] client 04 [HUB/FE] reason 4a [] on channel -1 [007fa91000 unknown] DRM: failed to idle channel 0 [DRM] Similarly, the NVIDIA proprietary driver also fails after resume (black screen, 100% CPU usage in Xorg process). We shipped a sample to NVIDIA for diagnosis, and their response indicated that it's a problem with the parent PCI bridge (on the Intel SoC), not the GPU. Runtime suspend/resume works fine, only S3 suspend is affected. We found a workaround: on resume, rewrite the Intel PCI bridge 'Prefetchable Base Upper 32 Bits' register (PCI_PREF_BASE_UPPER32). In the cases that I checked, this register has value 0 and we just have to rewrite that value. Linux already saves and restores PCI config space during suspend/resume, but this register was being skipped because upon resume, it already has value 0 (the correct, pre-suspend value). Intel appear to have previously acknowledged this behaviour and the requirement to rewrite this register: https://bugzilla.kernel.org/show_bug.cgi?id=116851#c23 Based on that, rewrite the prefetch register values even when that appears unnecessary. We have confirmed this solution on all the affected models we have in-hands (X542UQ, UX533FD, X530UN, V272UN). Additionally, this solves an issue where r8169 MSI-X interrupts were broken after S3 suspend/resume on ASUS X441UAR. This issue was recently worked around in commit 7bb05b85bc2d ("r8169: don't use MSI-X on RTL8106e"). It also fixes the same issue on RTL6186evl/8111evl on an Aimfor-tech laptop that we had not yet patched. I suspect it will also fix the issue that was worked around in commit 7c53a722459c ("r8169: don't use MSI-X on RTL8168g"). Thomas Martitz reports that this change also solves an issue where the AMD Radeon Polaris 10 GPU on the HP Zbook 14u G5 is unresponsive after S3 suspend/resume. Link: https://bugzilla.kernel.org/show_bug.cgi?id=201069 Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-By: Peter Wu <peter@lekensteyn.nl> CC: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13x86/vdso: Fix vDSO syscall fallback asm constraint regressionAndy Lutomirski1-4/+4
commit 02e425668f5c9deb42787d10001a3b605993ad15 upstream. When I added the missing memory outputs, I failed to update the index of the first argument (ebx) on 32-bit builds, which broke the fallbacks. Somehow I must have screwed up my testing or gotten lucky. Add another test to cover gettimeofday() as well. Signed-off-by: Andy Lutomirski <luto@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Fixes: 715bd9d12f84 ("x86/vdso: Fix asm constraints on vDSO syscall fallbacks") Link: http://lkml.kernel.org/r/21bd45ab04b6d838278fa5bebfa9163eceffa13c.1538608971.git.luto@kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13x86/vdso: Fix asm constraints on vDSO syscall fallbacksAndy Lutomirski1-8/+10
commit 715bd9d12f84d8f5cc8ad21d888f9bc304a8eb0b upstream. The syscall fallbacks in the vDSO have incorrect asm constraints. They are not marked as writing to their outputs -- instead, they are marked as clobbering "memory", which is useless. In particular, gcc is smart enough to know that the timespec parameter hasn't escaped, so a memory clobber doesn't clobber it. And passing a pointer as an asm *input* does not tell gcc that the pointed-to value is changed. Add in the fact that the asm instructions weren't volatile, and gcc was free to omit them entirely unless their sole output (the return value) is used. Which it is (phew!), but that stops happening with some upcoming patches. As a trivial example, the following code: void test_fallback(struct timespec *ts) { vdso_fallback_gettime(CLOCK_MONOTONIC, ts); } compiles to: 00000000000000c0 <test_fallback>: c0: c3 retq To add insult to injury, the RCX and R11 clobbers on 64-bit builds were missing. The "memory" clobber is also unnecessary -- no ordering with respect to other memory operations is needed, but that's going to be fixed in a separate not-for-stable patch. Fixes: 2aae950b21e4 ("x86_64: Add vDSO for x86-64 with gettimeofday/clock_gettime/getcpu") Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/2c0231690551989d2fafa60ed0e7b5cc8b403908.1538422295.git.luto@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13xen-netback: fix input validation in xenvif_set_hash_mapping()Jan Beulich1-5/+7
commit 780e83c259fc33e8959fed8dfdad17e378d72b62 upstream. Both len and off are frontend specified values, so we need to make sure there's no overflow when adding the two for the bounds check. We also want to avoid undefined behavior and hence use off to index into ->hash.mapping[] only after bounds checking. This at the same time allows to take care of not applying off twice for the bounds checking against vif->num_queues. It is also insufficient to bounds check copy_op.len, as this is len truncated to 16 bits. This is XSA-270 / CVE-2018-15471. Reported-by: Felix Wilhelm <fwilhelm@google.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Tested-by: Paul Durrant <paul.durrant@citrix.com> Cc: stable@vger.kernel.org [4.7 onwards] Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13fbdev/omapfb: fix omapfb_memory_read infoleakTomi Valkeinen1-1/+4
commit 1bafcbf59fed92af58955024452f45430d3898c5 upstream. OMAPFB_MEMORY_READ ioctl reads pixels from the LCD's memory and copies them to a userspace buffer. The code has two issues: - The user provided width and height could be large enough to overflow the calculations - The copy_to_user() can copy uninitialized memory to the userspace, which might contain sensitive kernel information. Fix these by limiting the width & height parameters, and only copying the amount of data that we actually received from the LCD. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Reported-by: Jann Horn <jannh@google.com> Cc: stable@vger.kernel.org Cc: security@kernel.org Cc: Will Deacon <will.deacon@arm.com> Cc: Jann Horn <jannh@google.com> Cc: Tony Lindgren <tony@atomide.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-13mm/vmstat.c: skip NR_TLB_REMOTE_FLUSH* properlyJann Horn1-0/+3
commit 58bc4c34d249bf1bc50730a9a209139347cfacfe upstream. 5dd0b16cdaff ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP") made the availability of the NR_TLB_REMOTE_FLUSH* counters inside the kernel unconditional to reduce #ifdef soup, but (either to avoid showing dummy zero counters to userspace, or because that code was missed) didn't update the vmstat_array, meaning that all following counters would be shown with incorrect values. This only affects kernel builds with CONFIG_VM_EVENT_COUNTERS=y && CONFIG_DEBUG_TLBFLUSH=y && CONFIG_SMP=n. Link: http://lkml.kernel.org/r/20181001143138.95119-2-jannh@google.com Fixes: 5dd0b16cdaff ("mm/vmstat: Make NR_TLB_REMOTE_FLUSH_RECEIVED available even on UP") Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Roman Gushchin <guro@fb.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Kemi Wang <kemi.wang@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10Linux 4.9.132v4.9.132Greg Kroah-Hartman1-1/+1
2018-10-10dm thin metadata: fix __udivdi3 undefined on 32-bitMike Snitzer1-4/+2
commit 013ad043906b2befd4a9bfb06219ed9fedd92716 upstream. sector_div() is only viable for use with sector_t. dm_block_t is typedef'd to uint64_t -- so use div_u64() instead. Fixes: 3ab918281 ("dm thin metadata: try to avoid ever aborting transactions") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10ocfs2: fix locking for res->tracking and dlm->tracking_listAshish Samant1-2/+2
commit cbe355f57c8074bc4f452e5b6e35509044c6fa23 upstream. In dlm_init_lockres() we access and modify res->tracking and dlm->tracking_list without holding dlm->track_lock. This can cause list corruptions and can end up in kernel panic. Fix this by locking res->tracking and dlm->tracking_list with dlm->track_lock instead of dlm->spinlock. Link: http://lkml.kernel.org/r/1529951192-4686-1-git-send-email-ashish.samant@oracle.com Signed-off-by: Ashish Samant <ashish.samant@oracle.com> Reviewed-by: Changwei Ge <ge.changwei@h3c.com> Acked-by: Joseph Qi <jiangqi903@gmail.com> Acked-by: Jun Piao <piaojun@huawei.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <ge.changwei@h3c.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10proc: restrict kernel stack dumps to rootJann Horn1-0/+14
commit f8a00cef17206ecd1b30d3d9f99e10d9fa707aa7 upstream. Currently, you can use /proc/self/task/*/stack to cause a stack walk on a task you control while it is running on another CPU. That means that the stack can change under the stack walker. The stack walker does have guards against going completely off the rails and into random kernel memory, but it can interpret random data from your kernel stack as instruction pointers and stack pointers. This can cause exposure of kernel stack contents to userspace. Restrict the ability to inspect kernel stacks of arbitrary tasks to root in order to prevent a local attacker from exploiting racy stack unwinding to leak kernel task stack contents. See the added comment for a longer rationale. There don't seem to be any users of this userspace API that can't gracefully bail out if reading from the file fails. Therefore, I believe that this change is unlikely to break things. In the case that this patch does end up needing a revert, the next-best solution might be to fake a single-entry stack based on wchan. Link: http://lkml.kernel.org/r/20180927153316.200286-1-jannh@google.com Fixes: 2ec220e27f50 ("proc: add /proc/*/stack") Signed-off-by: Jann Horn <jannh@google.com> Acked-by: Kees Cook <keescook@chromium.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ken Chen <kenchen@google.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H . Peter Anvin" <hpa@zytor.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10gpiolib: Free the last requested descriptorRicardo Ribalda Delgado1-1/+1
commit 19a4fbffc94e41abaa2a623a25ce2641d69eccf0 upstream. The current code only frees N-1 gpios if an error occurs during gpiod_set_transitory, gpiod_direction_output or gpiod_direction_input. Leading to gpios that cannot be used by userspace nor other drivers. Cc: Timur Tabi <timur@codeaurora.org> Cc: stable@vger.kernel.org Fixes: ab3dbcf78f60f46d ("gpioib: do not free unrequested descriptors) Reported-by: Jan Lorenzen <jl@newtec.dk> Reported-by: Jim Paris <jim@jtan.com> Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10crypto: mxs-dcp - Fix wait logic on chan threadsLeonard Crestez1-23/+30
commit d80771c08363ad7fbf0f56f5301e7ca65065c582 upstream. When compiling with CONFIG_DEBUG_ATOMIC_SLEEP=y the mxs-dcp driver prints warnings such as: WARNING: CPU: 0 PID: 120 at kernel/sched/core.c:7736 __might_sleep+0x98/0x9c do not call blocking ops when !TASK_RUNNING; state=1 set at [<8081978c>] dcp_chan_thread_sha+0x3c/0x2ec The problem is that blocking ops will manipulate current->state themselves so it is not allowed to call them between set_current_state(TASK_INTERRUPTIBLE) and schedule(). Fix this by converting the per-chan mutex to a spinlock (it only protects tiny list ops anyway) and rearranging the wait logic so that callbacks are called current->state as TASK_RUNNING. Those callbacks will indeed call blocking ops themselves so this is required. Cc: <stable@vger.kernel.org> Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10crypto: qat - Fix KASAN stack-out-of-bounds bug in adf_probe()Waiman Long6-18/+18
commit ba439a6cbfa2936a6713f64cb499de7943673fe3 upstream. The following KASAN warning was printed when booting a 64-bit kernel on some systems with Intel CPUs: [ 44.512826] ================================================================== [ 44.520165] BUG: KASAN: stack-out-of-bounds in find_first_bit+0xb0/0xc0 [ 44.526786] Read of size 8 at addr ffff88041e02fc50 by task kworker/0:2/124 [ 44.535253] CPU: 0 PID: 124 Comm: kworker/0:2 Tainted: G X --------- --- 4.18.0-12.el8.x86_64+debug #1 [ 44.545858] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS BKVDTRL1.86B.0005.D08.1712070559 12/07/2017 [ 44.555682] Workqueue: events work_for_cpu_fn [ 44.560043] Call Trace: [ 44.562502] dump_stack+0x9a/0xe9 [ 44.565832] print_address_description+0x65/0x22e [ 44.570683] ? find_first_bit+0xb0/0xc0 [ 44.570689] kasan_report.cold.6+0x92/0x19f [ 44.578726] find_first_bit+0xb0/0xc0 [ 44.578737] adf_probe+0x9eb/0x19a0 [qat_c62x] [ 44.578751] ? adf_remove+0x110/0x110 [qat_c62x] [ 44.591490] ? mark_held_locks+0xc8/0x140 [ 44.591498] ? _raw_spin_unlock+0x30/0x30 [ 44.591505] ? trace_hardirqs_on_caller+0x381/0x570 [ 44.604418] ? adf_remove+0x110/0x110 [qat_c62x] [ 44.604427] local_pci_probe+0xd4/0x180 [ 44.604432] ? pci_device_shutdown+0x110/0x110 [ 44.617386] work_for_cpu_fn+0x51/0xa0 [ 44.621145] process_one_work+0x8fe/0x16e0 [ 44.625263] ? pwq_dec_nr_in_flight+0x2d0/0x2d0 [ 44.629799] ? lock_acquire+0x14c/0x400 [ 44.633645] ? move_linked_works+0x12e/0x2a0 [ 44.637928] worker_thread+0x536/0xb50 [ 44.641690] ? __kthread_parkme+0xb6/0x180 [ 44.645796] ? process_one_work+0x16e0/0x16e0 [ 44.650160] kthread+0x30c/0x3d0 [ 44.653400] ? kthread_create_worker_on_cpu+0xc0/0xc0 [ 44.658457] ret_from_fork+0x3a/0x50 [ 44.663557] The buggy address belongs to the page: [ 44.668350] page:ffffea0010780bc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 44.676356] flags: 0x17ffffc0000000() [ 44.680023] raw: 0017ffffc0000000 ffffea0010780bc8 ffffea0010780bc8 0000000000000000 [ 44.687769] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 44.695510] page dumped because: kasan: bad access detected [ 44.702578] Memory state around the buggy address: [ 44.707372] ffff88041e02fb00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 44.714593] ffff88041e02fb80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 44.721810] >ffff88041e02fc00: 00 00 00 00 00 00 f1 f1 f1 f1 04 f2 f2 f2 f2 f2 [ 44.729028] ^ [ 44.734864] ffff88041e02fc80: f2 f2 00 00 00 00 f3 f3 f3 f3 00 00 00 00 00 00 [ 44.742082] ffff88041e02fd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 44.749299] ================================================================== Looking into the code: int ret, bar_mask; : for_each_set_bit(bar_nr, (const unsigned long *)&bar_mask, It is casting a 32-bit integer pointer to a 64-bit unsigned long pointer. There are two problems here. First, the 32-bit pointer address may not be 64-bit aligned. Secondly, it is accessing an extra 4 bytes. This is fixed by changing the bar_mask type to unsigned long. Cc: <stable@vger.kernel.org> Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10ALSA: hda/realtek - Cannot adjust speaker's volume on Dell XPS 27 7760Kai-Heng Feng1-0/+1
commit 709ae62e8e6d9ac4df7dadb3b8ae432675c45ef9 upstream. The issue is the same as commit dd9aa335c880 ("ALSA: hda/realtek - Can't adjust speaker's volume on a Dell AIO"), the output requires to connect to a node with Amp-out capability. Applying the same fixup ALC298_FIXUP_SPK_VOLUME can fix the issue. BugLink: https://bugs.launchpad.net/bugs/1775068 Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10smb2: fix missing files in root share directory listingAurelien Aptel1-1/+1
commit 0595751f267994c3c7027377058e4185b3a28e75 upstream. When mounting a Windows share that is the root of a drive (eg. C$) the server does not return . and .. directory entries. This results in the smb2 code path erroneously skipping the 2 first entries. Pseudo-code of the readdir() code path: cifs_readdir(struct file, struct dir_context) initiate_cifs_search <-- if no reponse cached yet server->ops->query_dir_first dir_emit_dots dir_emit <-- adds "." and ".." if we're at pos=0 find_cifs_entry initiate_cifs_search <-- if pos < start of current response (restart search) server->ops->query_dir_next <-- if pos > end of current response (fetch next search res) for(...) <-- loops over cur response entries starting at pos cifs_filldir <-- skip . and .., emit entry cifs_fill_dirent dir_emit pos++ A) dir_emit_dots() always adds . & .. and sets the current dir pos to 2 (0 and 1 are done). Therefore we always want the index_to_find to be 2 regardless of if the response has . and .. B) smb1 code initializes index_of_last_entry with a +2 offset in cifssmb.c CIFSFindFirst(): psrch_inf->index_of_last_entry = 2 /* skip . and .. */ + psrch_inf->entries_in_buffer; Later in find_cifs_entry() we want to find the next dir entry at pos=2 as a result of (A) first_entry_in_buffer = cfile->srch_inf.index_of_last_entry - cfile->srch_inf.entries_in_buffer; This var is the dir pos that the first entry in the buffer will have therefore it must be 2 in the first call. If we don't offset index_of_last_entry by 2 (like in (B)), first_entry_in_buffer=0 but we were instructed to get pos=2 so this code in find_cifs_entry() skips the 2 first which is ok for non-root shares, as it skips . and .. from the response but is not ok for root shares where the 2 first are actual files pos_in_buf = index_to_find - first_entry_in_buffer; // pos_in_buf=2 // we skip 2 first response entries :( for (i = 0; (i < (pos_in_buf)) && (cur_ent != NULL); i++) { /* go entry by entry figuring out which is first */ cur_ent = nxt_dir_entry(cur_ent, end_of_smb, cfile->srch_inf.info_level); } C) cifs_filldir() skips . and .. so we can safely ignore them for now. Sample program: int main(int argc, char **argv) { const char *path = argc >= 2 ? argv[1] : "."; DIR *dh; struct dirent *de; printf("listing path <%s>\n", path); dh = opendir(path); if (!dh) { printf("opendir error %d\n", errno); return 1; } while (1) { de = readdir(dh); if (!de) { if (errno) { printf("readdir error %d\n", errno); return 1; } printf("end of listing\n"); break; } printf("off=%lu <%s>\n", de->d_off, de->d_name); } return 0; } Before the fix with SMB1 on root shares: <.> off=1 <..> off=2 <$Recycle.Bin> off=3 <bootmgr> off=4 and on non-root shares: <.> off=1 <..> off=4 <-- after adding .., the offsets jumps to +2 because <2536> off=5 we skipped . and .. from response buffer (C) <411> off=6 but still incremented pos <file> off=7 <fsx> off=8 Therefore the fix for smb2 is to mimic smb1 behaviour and offset the index_of_last_entry by 2. Test results comparing smb1 and smb2 before/after the fix on root share, non-root shares and on large directories (ie. multi-response dir listing): PRE FIX ======= pre-1-root VS pre-2-root: ERR pre-2-root is missing [bootmgr, $Recycle.Bin] pre-1-nonroot VS pre-2-nonroot: OK~ same files, same order, different offsets pre-1-nonroot-large VS pre-2-nonroot-large: OK~ same files, same order, different offsets POST FIX ======== post-1-root VS post-2-root: OK same files, same order, same offsets post-1-nonroot VS post-2-nonroot: OK same files, same order, same offsets post-1-nonroot-large VS post-2-nonroot-large: OK same files, same order, same offsets REGRESSION? =========== pre-1-root VS post-1-root: OK same files, same order, same offsets pre-1-nonroot VS post-1-nonroot: OK same files, same order, same offsets BugLink: https://bugzilla.samba.org/show_bug.cgi?id=13107 Signed-off-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Paulo Alcantara <palcantara@suse.deR> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10sysfs: Do not return POSIX ACL xattrs via listxattrAndreas Gruenbacher1-11/+13
commit ffc4c92227db5699493e43eb140b4cb5904c30ff upstream. Commit 786534b92f3c introduced a regression that caused listxattr to return the POSIX ACL attribute names even though sysfs doesn't support POSIX ACLs. This happens because simple_xattr_list checks for NULL i_acl / i_default_acl, but inode_init_always initializes those fields to ACL_NOT_CACHED ((void *)-1). For example: $ getfattr -m- -d /sys /sys: system.posix_acl_access: Operation not supported /sys: system.posix_acl_default: Operation not supported Fix this in simple_xattr_list by checking if the filesystem supports POSIX ACLs. Fixes: 786534b92f3c ("tmpfs: listxattr should include POSIX ACL xattrs") Reported-by: Marc Aurèle La France <tsi@tuyoix.net> Tested-by: Marc Aurèle La France <tsi@tuyoix.net> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com> Cc: stable@vger.kernel.org # v4.5+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10xen: fix GCC warning and remove duplicate EVTCHN_ROW/EVTCHN_COL usageJosh Abraham1-1/+1
[ Upstream commit 4dca864b59dd150a221730775e2f21f49779c135 ] This patch removes duplicate macro useage in events_base.c. It also fixes gcc warning: variable ‘col’ set but not used [-Wunused-but-set-variable] Signed-off-by: Joshua Abraham <j.abraham1776@gmail.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10xen: avoid crash in disable_hotplug_cpuOlaf Hering1-7/+8
[ Upstream commit 3366cdb6d350d95466ee430ac50f3c8415ca8f46 ] The command 'xl vcpu-set 0 0', issued in dom0, will crash dom0: BUG: unable to handle kernel NULL pointer dereference at 00000000000002d8 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 65 Comm: xenwatch Not tainted 4.19.0-rc2-1.ga9462db-default #1 openSUSE Tumbleweed (unreleased) Hardware name: Intel Corporation S5520UR/S5520UR, BIOS S5500.86B.01.00.0050.050620101605 05/06/2010 RIP: e030:device_offline+0x9/0xb0 Code: 77 24 00 e9 ce fe ff ff 48 8b 13 e9 68 ff ff ff 48 8b 13 e9 29 ff ff ff 48 8b 13 e9 ea fe ff ff 90 66 66 66 66 90 41 54 55 53 <f6> 87 d8 02 00 00 01 0f 85 88 00 00 00 48 c7 c2 20 09 60 81 31 f6 RSP: e02b:ffffc90040f27e80 EFLAGS: 00010203 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff8801f3800000 RSI: ffffc90040f27e70 RDI: 0000000000000000 RBP: 0000000000000000 R08: ffffffff820e47b3 R09: 0000000000000000 R10: 0000000000007ff0 R11: 0000000000000000 R12: ffffffff822e6d30 R13: dead000000000200 R14: dead000000000100 R15: ffffffff8158b4e0 FS: 00007ffa595158c0(0000) GS:ffff8801f39c0000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000002d8 CR3: 00000001d9602000 CR4: 0000000000002660 Call Trace: handle_vcpu_hotplug_event+0xb5/0xc0 xenwatch_thread+0x80/0x140 ? wait_woken+0x80/0x80 kthread+0x112/0x130 ? kthread_create_worker_on_cpu+0x40/0x40 ret_from_fork+0x3a/0x50 This happens because handle_vcpu_hotplug_event is called twice. In the first iteration cpu_present is still true, in the second iteration cpu_present is false which causes get_cpu_device to return NULL. In case of cpu#0, cpu_online is apparently always true. Fix this crash by checking if the cpu can be hotplugged, which is false for a cpu that was just removed. Also check if the cpu was actually offlined by device_remove, otherwise leave the cpu_present state as it is. Rearrange to code to do all work with device_hotplug_lock held. Signed-off-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10xen/manage: don't complain about an empty value in control/sysrq nodeVitaly Kuznetsov1-2/+4
[ Upstream commit 87dffe86d406bee8782cac2db035acb9a28620a7 ] When guest receives a sysrq request from the host it acknowledges it by writing '\0' to control/sysrq xenstore node. This, however, make xenstore watch fire again but xenbus_scanf() fails to parse empty value with "%c" format string: sysrq: SysRq : Emergency Sync Emergency Sync complete xen:manage: Error -34 reading sysrq code in control/sysrq Ignore -ERANGE the same way we already ignore -ENOENT, empty value in control/sysrq is totally legal. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Reviewed-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10cifs: read overflow in is_valid_oplock_break()Dan Carpenter1-0/+8
[ Upstream commit 097f5863b1a0c9901f180bbd56ae7d630655faaa ] We need to verify that the "data_offset" is within bounds. Reported-by: Dr Silvio Cesare of InfoSect <silvio.cesare@gmail.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10s390/qeth: don't dump past end of unknown HW headerJulian Wiedmann2-2/+2
[ Upstream commit 0ac1487c4b2de383b91ecad1be561b8f7a2c15f4 ] For inbound data with an unsupported HW header format, only dump the actual HW header. We have no idea how much payload follows it, and what it contains. Worst case, we dump past the end of the Inbound Buffer and access whatever is located next in memory. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10s390/qeth: use vzalloc for QUERY OAT bufferWenjia Zhang1-2/+3
[ Upstream commit aec45e857c5538664edb76a60dd452e3265f37d1 ] qeth_query_oat_command() currently allocates the kernel buffer for the SIOC_QETH_QUERY_OAT ioctl with kzalloc. So on systems with fragmented memory, large allocations may fail (eg. the qethqoat tool by default uses 132KB). Solve this issue by using vzalloc, backing the allocation with non-contiguous memory. Signed-off-by: Wenjia Zhang <wenjia@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-10r8169: Clear RTL_FLAG_TASK_*_PENDING when clearing RTL_FLAG_TASK_ENABLEDKai-Heng Feng1-3/+6
[ Upstream commit 6ad569019999300afd8e614d296fdc356550b77f ] After system suspend, sometimes the r8169 doesn't work when ethernet cable gets pluggued. This issue happens because rtl_reset_work() doesn't get called from rtl8169_runtime_resume(), after system suspend. In rtl_task(), RTL_FLAG_TASK_* only gets cleared if this condition is met: if (!netif_running(dev) || !test_bit(RTL_FLAG_TASK_ENABLED, tp->wk.flags)) ... If RTL_FLAG_TASK_ENABLED was cleared during system suspend while RTL_FLAG_TASK_RESET_PENDING was set, the next rtl_schedule_task() won't schedule task as the flag is still there. So in addition to clearing RTL_FLAG_TASK_ENABLED, also clears other flags. Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2026-05-12 21:09:13 +0300