summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-03-03ath9k: Fix MCI TX controlSujith Manoharan2-2/+10
This patch makes sure that the antenna configuration is used properly when setting AR_MCI_TX_CTRL. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03ath9k: Handle 2-ANT AR9565 in MCI resetSujith Manoharan2-16/+69
The value programmed in the BTCOEX control register is different for each chip. This patch adds support for 2-ANT, 1-ANT solutions based on AR9565. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03ath9k: Add new MCI configuration parametersSujith Manoharan1-0/+11
Several new MCI parameters need to be handled for new chips, add them. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03ath9k: Remove useless check in MCI resetSujith Manoharan1-5/+0
If we fail to allocate the sched/gpm buffers when initializing MCI, we bail out properly. Checking them in ar9003_mci_reset() is unnecessary, so remove it. Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03ath9k: Move MCI registers to reg_mci.hSujith Manoharan3-275/+301
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03iwlegacy: 4965-rs: Remove bogus colon after newline from debug messageGeert Uytterhoeven1-1/+1
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-03Merge tag 'iwlwifi-next-for-kalle-2015-03-01' of ↵Kalle Valo33-1103/+1325
https://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next * add triggers for firmware dump collection * remove support for -9.ucode * new statitics API * rate control improvements
2015-03-02bcma: enable support for PCIe Gen 2 host devicesRafał Miłecki3-2/+16
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02bcma: support bringing up bus hosted on PCIe Gen 2Rafał Miłecki4-3/+32
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02bcma: change IRQ control function to accept bus as an argumentRafał Miłecki4-6/+6
It doesn't operate on PCI core, but PCI host device, so there is no point of passing core related struct. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02bcma: add helpers bringing PCIe hosted bus up / downRafał Miłecki7-26/+41
Bringing PCIe hosted bus up requires operating on host-related core. Since we plan to support PCIe Gen 2 devices we should provide a helper picking the correct one (PCIE or PCIE2). Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02brcmfmac: respect reason when deleting (deauthenticating) STARafał Miłecki1-1/+1
Starting with kernel 3.19 reason is provided by cfg80211. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-03-02iwlwifi: mvm: don't override passive dwell in case of fragmented scanDavid Spinadel1-6/+7
Currently scan params structure has only active or passive dwell time fields, passive one is used for fragmented scans too. FW needs the passive dwell time even when performing fragmented scan for calculating time between channels. Add a separate parameter for fragmented dwell time and pass both fragmented and passive to FW. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add trigger for firmware dump upon low RSSIEmmanuel Grumbach3-0/+30
Lots of issues can be caught when the RSSI drops. Add the ability to collect the firmware data at that point. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add trigger for firmware dump upon statisticsEmmanuel Grumbach3-0/+48
It can be very useful to monitor the statistics and trigger a firmware dump when a certain value hits a certain offset. Since the statistics are huge, add a generic trigger. When the DWORD at offset X reaches value Y. Since there is another trigger before this one I can't add right now because of a dependency on mac80211, add a reserved entry to keep the enum in place. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: restart firmware recording when no configuration is setEmmanuel Grumbach2-1/+19
Sometimes the firmware will have a hard coded configuration. In this case, the driver won't find any configuration in the firmware file, and it will have to re-start recording in case it has been stopped. This can't be done by the configuration host command since there is no such host command configured. Do that with the registers instead. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add trigger for firmware dump upon command responseEmmanuel Grumbach3-0/+48
This will allow to collect the data as soon the firmware sends a specific notification of command response. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add trigger for firmware dump upon channel switchEmmanuel Grumbach2-0/+5
We fire the trigger when the channel switch starts, but the delay is configurable. That makes is easier to catch channel switches that fail. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add trigger for firmware dump upon missed beaconsEmmanuel Grumbach3-0/+49
Missing beacons is a good indication that something is going wrong in the firmware. Add a trigger to be able to collect data when we start missing beacons with a configurable threshold. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add the cause of the firmware dump in the dumpEmmanuel Grumbach6-12/+108
Now that the firmware dump can be triggered by events in the code and not only the user or an firmware ASSERT, we need a way to know why the firmware dump was triggered. Add a section in the dump file for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: add framework for triggers for fw dumpEmmanuel Grumbach10-80/+243
Most of the time, the issues we want to debug with the firmware dump mechanism are transient. It is then very hard to stop the recording on time and get meaningful data. In order to solve this, I add here an infrastucture of triggers. The user will supply a list of triggers that will start / stop the recording. We have two types of triggers: start and stop. Start triggers can start a specific configuration. The stop triggers will be able to kick the collection of the data with the currently running configuration. These triggers are given to the driver by the .ucode file - just like the configuration. In the next patches, I'll add triggers in the code. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: use only 40 ms for fragmented scanDavid Spinadel1-1/+1
20 ms fragments are no longer required by system. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: allow to force the Rx chains from debugfsEmmanuel Grumbach3-0/+57
This is useful to debug weird antenna problems. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: add new TLV capability flag for BT PLCREmmanuel Grumbach4-4/+12
Packet Level Co-Running is a BT Coex feature which is supported on certain devices only, hence the need for a TLV flag for it. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-02iwlwifi: mvm: don't iterate interfaces to disconnect in net-detectLuciano Coelho1-3/+6
We shouldn't call iwl_mvm_d3_disconnect_iter() on the running interfaces when we are woken up due to net-detect, because it doesn't make sense. Additionally, this seems to set the IEEE80211_SDATA_DISCONNECT_RESUME flag that will cause a disconnection on the next resume (if a normal WoWLAN is used). To solve this, skip the iteration loop when net-detect is set. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reported-by: Samuel Tan <samueltan@chromium.org> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: new Alive / error table APIEmmanuel Grumbach7-32/+245
The new API slightly changes the layout of the version of the firmware - prepare for that. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: support beacon statistics for BSS clientJohannes Berg4-4/+82
Report the average beacon signal and the number of received beacons as measured by the firmware. Since the firmware just counts, and doesn't reset the counter at all, clear it in the firmware whenever we associate. However, accumulate it over firmware restart. Since clearing the statistics in the firmware will also clear the ones for the radio statistics, add those to the accumulator when cleared. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: don't write to DBGC_OUT_CTRL when stopping the recordingEran Harary1-1/+2
Due to HW bug in the DBGC when driver want to stop the dbg recording it should wait 100us before collecting the data instead of write 0 to DBGC_OUT_CTRL. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: remove deprecated scan API codeLuciano Coelho7-818/+20
The legacy scan API is deprecated and not used anymore with 10 and higher firmware versions. Since we deprecated firmware version 9, we can remove a whole lot of unused code. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: deprecate -9.ucode for 3160 / 7260 / 7265Luciano Coelho2-3/+3
This firmware is not supported anymore. Stop loading this firmware. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: support radio statistics as global surveyJohannes Berg8-22/+127
Export the radio statistics from the statistics v10 API (if the firmware also has the capability to fill these statistics) using the global survey data facility. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: add statistics API version 10Johannes Berg4-22/+90
New firmware versions will report statistics using a new version 10 of the API, instead of the current version 8. Add support for this. This enables getting beacon and radio statistics. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: pcie: apply destination before releasing resetEmmanuel Grumbach1-3/+3
This allows to use the firmware debugging system even when the configuration values are set hard coded in the firmware. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: remove unused function in BT coexEyal Shapira2-7/+0
Cleanup unused code. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: fix BT coex shared antenna activity checkEyal Shapira1-1/+1
The shared antenna should be forbidden to use only if there's high BT activity. Comparing to BT_OFF was effectively causing us to always forbid using the shared antenna for SISO. This leads to degraded performance in scenarios where the shared antenna would have better performance. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: print single stream params via debugfsEyal Shapira1-0/+11
Add this to the info printed when reading rate_scale_table. Useful for debugging. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: avoid ss_force from being reset after tx idleEyal Shapira2-12/+15
ss_force is a debugging option to force a certain single stream tx mode. It's not useful if it gets reset after tx idle. Fix that. While at it also make sure any code touching ss_force will only get compiled if debugfs support is configured. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: increase the number of PAPD channel groups to 9Eran Harary1-1/+1
Newer devices have more PAPD channel groups. Signed-off-by: Eran Harary <eran.harary@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: consider TDLS queues as used during drainArik Nemtsov1-0/+8
When a TDLS station is being drained its Tx queues are still in use. Don't allocate them to a different station in the meantime. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: disable MIMO for low latency P2PEyal Shapira1-0/+8
Due to issues with Miracast adapters MIMO reception disable use of MIMO when for low latency P2P traffic. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: adapt rate matching to new STBC/BFEREyal Shapira2-9/+37
Once the FW supports autonomous decision between STBC/BFER/SISO we no longer set the STBC bit and ANT_AB in the rate table. However the FW rate in the tx response will have the STBC or BFER bit set and the antennas set to ANT_AB in case these were chosen by it. This will cause us to discard any such response as unmatching the current LQ table and thus break the rs search cycle completely. Fix this by relaxing the rate matching in case we're working with the new API and STBC/BFER are used. Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-03-01iwlwifi: mvm: rs: fix BT Coex check to look at the correct antEyal Shapira1-7/+14
The check to avoid the shared antenna was passed the wrong antenna parameter. It should have checked whether the antenna of the next column we're considering is allowed and instead it was passed the current antenna. This could lead to a wrong choice of the next column in the rs algorithm and non optimal performance. Fixes: commit 219fb66b49fac64bb ("iwlwifi: mvm: rs - don't use the shared antenna when BT load is high") Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
2015-02-27wil6210: track privacy connection attributeVladimir Kondratiev1-12/+18
For the STA interface, track 'privacy'. Refactor safety checks to: - always print connection params - always check IE size validity - require RSN IE for secure connection Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: rename 'secure_pcp' to 'privacy'Vladimir Kondratiev4-4/+4
Make this field to track privacy attribute for all interface types Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: Fix division by zero in wil_vring_debugfs_showBoris Sorochkin1-6/+13
On some platforms get_cycles() implemented to allways return 0. On such platforms "Division by zero" bug was triggered. Signed-off-by: Boris Sorochkin <boriss@codeaurora.org> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: Change of threshold for tx vring idleness measurementVladimir Shulman3-17/+39
Change threshold to be variable debugfs entry from hard-coded 0. Default threshold value is 16 descriptors because HW is capable of fetching up to 16 descriptors at once. Signed-off-by: Vladimir Shulman <qca_shulmanv@qca.qualcomm.com> Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: branch prediction hintsVladimir Kondratiev2-32/+33
Mark expected branches using likely()/unlikely(). Do it on high performance route - data path and interrupts Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: enable fix for HW bug in 802.11->803.3 transformVladimir Kondratiev3-31/+11
In the old hardware, bug existed that caused DA and SA for every Rx packet to be swapped in the AP mode. New hardware has fix for this bug. Enable this fix in the hardware. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: remove support for old hardwareVladimir Kondratiev5-123/+42
Hardware older than Sparrow B0 obsolete. There is no WiFi product that uses this hardware. Recent firmware does not support it either. Remove driver support. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2015-02-27wil6210: boot loaderVladimir Kondratiev7-50/+88
Introduce boot loader. Instead of the operational firmware, very small boot loader is burned to the on-board flash. Boot loader initializes hardware upon reset, and prepares for low power mode. Boot loader reports MAC address and detects radio chip connected. Driver loads firmware only when bringing up interface. All information required to set up network interface, most important is MAC address, reported by the boot loader The firmware composed of 2 files: - wil6210.fw - firmware itself (compiled code + data) - wil6210.board - board file (various board and radio dependent calibrations and parameters) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-02 14:23:40 +0300