summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-05Merge branch 'for-linus' of ↵Linus Torvalds4-6/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice) ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582 ALSA: take tu->qlock with irqs disabled ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite P500-PSPGSC-01800T ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite Pro T130-15F ALSA: hda - fix array indexing while creating inputs for Cirrus codecs ALSA: es968: fix wrong PnP dma index
2010-05-05Merge branch 'for-linus' of ↵Linus Torvalds10-56/+183
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: joydev - allow binding to button-only devices Input: elantech - ignore high bits in the position coordinates Input: elantech - allow forcing Elantech protocol Input: elantech - fix firmware version check Input: ati_remote - add some missing devices from lirc_atiusb Input: eeti_ts - cancel pending work when going to suspend Input: Add support of Synaptics Clickpad device Revert "Input: ALPS - add signature for HP Pavilion dm3 laptops" Input: psmouse - ignore parity error for basic protocols
2010-05-05raid6: fix recovery performance regressionDan Williams1-8/+13
The raid6 recovery code should immediately drop back to the optimized synchronous path when a p+q dma resource is not available. Otherwise we run the non-optimized/multi-pass async code in sync mode. Verified with raid6test (NDISKS=255) Applies to kernels >= 2.6.32. Cc: <stable@kernel.org> Acked-by: NeilBrown <neilb@suse.de> Reported-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-05Merge branch 'fix/hda' into for-linusTakashi Iwai2-3/+7
2010-05-05ALSA: hda: Fix 0 dB for Packard Bell models using Conexant CX20549 (Venice)Daniel T Chen1-2/+3
BugLink: https://launchpad.net/bugs/541802 The OR's hardware distorts at PCM 100% because it does not correspond to 0 dB. Fix this in patch_cxt5045() for all Packard Bell models. Reported-by: Valombre Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-05ALSA: hda - Add quirk for Dell Inspiron 19T using a Conexant CX20582Anisse Astier1-0/+1
Add a quirk for all-in-one computer Dell Inspiron One 19 Touch to have proper HP and Mic support. Signed-off-by: Anisse Astier <anisse@astier.eu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-05ALSA: take tu->qlock with irqs disabledDan Carpenter1-2/+3
We should disable irqs when we take the tu->qlock because it is used in the irq handler. The only place that doesn't is snd_timer_user_ccallback(). Most of the time snd_timer_user_ccallback() is called with interrupts disabled but the the first ti->ccallback() call in snd_timer_notify1() has interrupts enabled. This was caught by lockdep which generates the following message: > ================================= > [ INFO: inconsistent lock state ] > 2.6.34-rc5 #5 > --------------------------------- > inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage. > dolphin/4003 [HC1[1]:SC0[0]:HE0:SE1] takes: > (&(&tu->qlock)->rlock){?.+...}, at: [<f84ec472>] snd_timer_user_tinterrupt+0x28/0x132 [snd_timer] > {HARDIRQ-ON-W} state was registered at: > [<c1048de9>] __lock_acquire+0x654/0x1482 > [<c1049c73>] lock_acquire+0x5c/0x73 > [<c125ac3e>] _raw_spin_lock+0x25/0x34 > [<f84ec370>] snd_timer_user_ccallback+0x55/0x95 [snd_timer] > [<f84ecc4b>] snd_timer_notify1+0x53/0xca [snd_timer] Reported-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-05ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite P500-PSPGSC-01800TDaniel T Chen1-0/+1
BugLink: https://launchpad.net/bugs/549267 The OR verified that using the olpc-xo-1_5 model quirk allows the headphones to be audible when inserted into the jack. Capture was also verified to work correctly. Reported-by: Richard Gagne Tested-by: Richard Gagne Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-05ALSA: hda: Use olpc-xo-1_5 quirk for Toshiba Satellite Pro T130-15FDaniel T Chen1-0/+1
BugLink: https://launchpad.net/bugs/573284 The OR verified that using the olpc-xo-1_5 model quirk allows the headphones to be audible when inserted into the jack. Capture was also verified to work correctly. Reported-by: Andy Couldrake <acouldrake@googlemail.com> Tested-by: Andy Couldrake <acouldrake@googlemail.com> Cc: <stable@kernel.org> Signed-off-by: Daniel T Chen <crimsun@ubuntu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-05ALSA: hda - fix array indexing while creating inputs for Cirrus codecsBrian J. Tarricone1-1/+1
This fixes a problem where cards show up as only having a single mixer element, suppressing all sound output. Signed-off-by: Brian J. Tarricone <brian@tarricone.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-05Merge branch 'drm-linus' of ↵Linus Torvalds14-47/+83
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms/legacy: only enable load detection property on DVI-I drm/radeon/kms: fix panel scaling adjusted mode setup drivers/gpu/drm/drm_sysfs.c: sysfs files error handling drivers/gpu/drm/radeon/radeon_atombios.c: range check issues gpu: vga_switcheroo, fix lock imbalance drivers/gpu/drm/drm_memory.c: fix check for end of loop drivers/gpu/drm/via/via_video.c: fix off by one issue drm/radeon/kms/agp The wrong AGP chipset can cause a NULL pointer dereference drm/radeon/kms: r300 fix CS checker to allow zbuffer-only fastfill
2010-05-05Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds5-1/+22
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip: powernow-k8: Fix frequency reporting x86: Fix parse_reservetop() build failure on certain configs x86: Fix NULL pointer access in irq_force_complete_move() for Xen guests x86: Fix 'reservetop=' functionality
2010-05-05Merge branch 'for-linus' of ↵Linus Torvalds2-4/+8
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: KEYS: Fix RCU handling in key_gc_keyring() KEYS: Fix an RCU warning in the reading of user keys
2010-05-05KEYS: Fix RCU handling in key_gc_keyring()David Howells1-3/+6
key_gc_keyring() needs to either hold the RCU read lock or hold the keyring semaphore if it's going to scan the keyring's list. Given that it only needs to read the key list, and it's doing so under a spinlock, the RCU read lock is the thing to use. Furthermore, the RCU check added in e7b0a61b7929632d36cf052d9e2820ef0a9c1bfe is incorrect as holding the spinlock on key_serial_lock is not grounds for assuming a keyring's pointer list can be read safely. Instead, a simple rcu_dereference() inside of the previously mentioned RCU read lock is what we want. Reported-by: Serge E. Hallyn <serue@us.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Acked-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-05-05KEYS: Fix an RCU warning in the reading of user keysDavid Howells1-1/+2
Fix an RCU warning in the reading of user keys: =================================================== [ INFO: suspicious rcu_dereference_check() usage. ] --------------------------------------------------- security/keys/user_defined.c:202 invoked rcu_dereference_check() without protection! other info that might help us debug this: rcu_scheduler_active = 1, debug_locks = 0 1 lock held by keyctl/3637: #0: (&key->sem){+++++.}, at: [<ffffffff811a80ae>] keyctl_read_key+0x9c/0xcf stack backtrace: Pid: 3637, comm: keyctl Not tainted 2.6.34-rc5-cachefs #18 Call Trace: [<ffffffff81051f6c>] lockdep_rcu_dereference+0xaa/0xb2 [<ffffffff811aa55f>] user_read+0x47/0x91 [<ffffffff811a80be>] keyctl_read_key+0xac/0xcf [<ffffffff811a8a06>] sys_keyctl+0x75/0xb7 [<ffffffff81001eeb>] system_call_fastpath+0x16/0x1b Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2010-05-05drm/radeon/kms/legacy: only enable load detection property on DVI-IAlex Deucher1-0/+2
DVI-D doesn't have analog. This matches the avivo behavior. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-05drm/radeon/kms: fix panel scaling adjusted mode setupAlex Deucher3-22/+53
This should duplicate exactly what the ddx does for both legacy and avivo. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-05-05Merge branch 'fixes' of ↵Linus Torvalds8-74/+110
git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: ocfs2: Avoid a gcc warning in ocfs2_wipe_inode(). ocfs2: Avoid direct write if we fall back to buffered I/O ocfs2_dlmfs: Fix math error when reading LVB. ocfs2: Update VFS inode's id info after reflink. ocfs2: potential ERR_PTR dereference on error paths ocfs2: Add directory entry later in ocfs2_symlink() and ocfs2_mknod() ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_mknod error path ocfs2: use OCFS2_INODE_SKIP_ORPHAN_DIR in ocfs2_symlink error path ocfs2: add OCFS2_INODE_SKIP_ORPHAN_DIR flag and honor it in the inode wipe code ocfs2: Reset status if we want to restart file extension. ocfs2: Compute metaecc for superblocks during online resize. ocfs2: Check the owner of a lockres inside the spinlock ocfs2: one more warning fix in ocfs2_file_aio_write(), v2 ocfs2_dlmfs: User DLM_* when decoding file open flags.
2010-05-05Fix the x86_64 implementation of call_rwsem_wait()David Howells1-1/+1
The x86_64 call_rwsem_wait() treats the active state counter part of the R/W semaphore state as being 16-bit when it's actually 32-bit (it's half of the 64-bit state). It should do "decl %edx" not "decw %dx". Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-05Merge branch 'i2c-for-linus' of ↵Linus Torvalds3-23/+47
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'i2c-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: i2c-core: Use per-adapter userspace device lists i2c: Fix probing of FSC hardware monitoring chips i2c-core: Erase pointer to clientdata on removal
2010-05-05Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf: Fix resource leak in failure path of perf_event_open()
2010-05-05Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds2-5/+18
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: Fix RCU lockdep splat on freezer_fork path rcu: Fix RCU lockdep splat in set_task_cpu on fork path mutex: Don't spin when the owner CPU is offline or other weird cases
2010-05-04i2c-core: Use per-adapter userspace device listsJean Delvare2-16/+20
Using a single list for all userspace devices leads to a dead lock on multiplexed buses in some circumstances (mux chip instantiated from userspace). This is solved by using a separate list for each bus segment. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Michael Lawnick <ml.lawnick@gmx.de>
2010-05-04i2c: Fix probing of FSC hardware monitoring chipsJean Delvare1-5/+16
Some FSC hardware monitoring chips (Syleus at least) doesn't like quick writes we typically use to probe for I2C chips. Use a regular byte read instead for the address they live at (0x73). These are the only known chips living at this address on PC systems. For clarity, this fix should not be needed for kernels 2.6.30 and later, as we started instantiating the hwmon devices explicitly based on DMI data. Still, this fix is valuable in the following two cases: * Support for recent FSC chips on older kernels. The DMI-based device instantiation is more difficult to backport than the device support itself. * Case where the DMI-based device instantiation fails, whatever the reason. We fall back to probing in that case, so it should work. This fixes kernel bug #15634: https://bugzilla.kernel.org/show_bug.cgi?id=15634 Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Cc: stable@kernel.org
2010-05-04i2c-core: Erase pointer to clientdata on removalWolfram Sang2-2/+11
After discovering that a lot of i2c-drivers leave the pointer to their clientdata dangling, it was decided to let the core handle this issue. It is assumed that the core may access the private data after remove() as there are no guarantees for the lifetime of such pointers anyhow (see thread starting at http://lkml.org/lkml/2010/3/21/68) Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Jean Delvare <khali@linux-fr.org>
2010-05-04Input: joydev - allow binding to button-only devicesChristoph Fritz1-0/+18
Dance pads don't have an axis, so allow this kind of controllers to be used via legacy joystick interface. Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-04Input: elantech - ignore high bits in the position coordinatesFlorian Ragwitz2-29/+48
In older versions of the elantech hardware/firmware those bits always were unset, so it didn't actually matter, but newer versions seem to use those high bits for something else, screwing up the coordinates we report to the input layer for those devices. Signed-off-by: Florian Ragwitz <rafl@debian.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-04Input: elantech - allow forcing Elantech protocolFlorian Ragwitz1-2/+10
Apparently hardware vendors now ship elantech touchpads with different version magic. This options allows for them to be tested easier with the current driver in order to add their magic to the whitelist later. Signed-off-by: Florian Ragwitz <rafl@debian.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-04Input: elantech - fix firmware version checkFlorian Ragwitz1-1/+2
The check determining whether device should use 4- or 6-byte packets was trying to compare firmware with 2.48, but was failing on majors greater than 2. The new check ensures that versions like 4.1 are checked properly. Signed-off-by: Florian Ragwitz <rafl@debian.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-04Input: ati_remote - add some missing devices from lirc_atiusbJarod Wilson1-5/+9
The (out-of-tree) lirc_atiusb driver has a much longer list of devices it supports. Some of them look like they may just be guesses at possible device IDs, but a few are definitely confirmed devices. This adds the nVidia-branded RF receiver and the X10 Lola Wireless Video Sender device (which contains an RF receiver) to the list of devices in ati_remote. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-05-04ocfs2: Avoid a gcc warning in ocfs2_wipe_inode().Joel Becker1-1/+1
gcc warns that a variable is uninitialized. It's actually handled, but an early return fools gcc. Let's just initialize the variable to a garbage value that will crash if the usage is ever broken. Signed-off-by: Joel Becker <joel.becker@oracle.com>
2010-05-04Merge branch 'for-linus' of ↵Linus Torvalds12-38/+71
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: remove bad auth_x kmem_cache ceph: fix lockless caps check ceph: clear dir complete, invalidate dentry on replayed rename ceph: fix direct io truncate offset ceph: discard incoming messages with bad seq # ceph: fix seq counting for skipped messages ceph: add missing #includes ceph: fix leaked spinlock during mds reconnect ceph: print more useful version info on module load ceph: fix snap realm splits ceph: clear dir complete on d_move
2010-05-03ceph: remove bad auth_x kmem_cacheSage Weil1-22/+10
It's useless, since our allocations are already a power of 2. And it was allocated per-instance (not globally), which caused a name collision when we tried to mount a second file system with auth_x enabled. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix lockless caps checkSage Weil1-1/+1
The __ variant requires caller to hold i_lock. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: clear dir complete, invalidate dentry on replayed renameSage Weil1-0/+9
If a rename operation is resent to the MDS following an MDS restart, the client does not get a full reply (containing the resulting metadata) back. In that case, a ceph_rename() needs to compensate by doing anything useful that fill_inode() would have, like d_move(). It also needs to invalidate the dentry (to workaround the vfs_rename_dir() bug) and clear the dir complete flag, just like fill_trace(). Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix direct io truncate offsetSage Weil1-1/+2
truncate_inode_pages_range wants the end offset to align with the last byte in a page. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: discard incoming messages with bad seq #Sage Weil1-0/+20
We can get old message seq #'s after a tcp reconnect for stateful sessions (i.e., the MDS). If we get a higher seq #, that is an error, and we shouldn't see any bad seq #'s for stateless (mon, osd) connections. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix seq counting for skipped messagesSage Weil1-0/+2
Increment in_seq even when the message is skipped for some reason. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: add missing #includesSage Weil3-0/+4
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix leaked spinlock during mds reconnectSage Weil1-1/+1
Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: print more useful version info on module loadSage Weil1-3/+4
Decouple the client version from the server side. Print relevant protocol and map version info instead. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: fix snap realm splitsSage Weil1-10/+14
The snap realm split was checking i_snap_realm, not the list_head, to determine if an inode belonged in the new realm. The check always failed, which meant we always moved the inode, corrupting the old realm's list and causing various crashes. Also wait to release old realm reference to avoid possibility of use after free. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03ceph: clear dir complete on d_moveSage Weil1-0/+4
d_move() reorders the d_subdirs list, breaking the readdir result caching. Unless/until d_move preserves that ordering, clear CEPH_I_COMPLETE on rename. Signed-off-by: Sage Weil <sage@newdream.net>
2010-05-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds1-1/+1
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.
2010-05-03nilfs2: fix sync silent failureRyusuke Konishi1-0/+1
As of 32a88aa1, __sync_filesystem() will return 0 if s_bdi is not set. And nilfs does not set s_bdi anywhere. I noticed this problem by the warning introduced by the recent commit 5129a469 ("Catch filesystem lacking s_bdi"). WARNING: at fs/super.c:959 vfs_kern_mount+0xc5/0x14e() Hardware name: PowerEdge 2850 Modules linked in: nilfs2 loop tpm_tis tpm tpm_bios video shpchp pci_hotplug output dcdbas Pid: 3773, comm: mount.nilfs2 Not tainted 2.6.34-rc6-debug #38 Call Trace: [<c1028422>] warn_slowpath_common+0x60/0x90 [<c102845f>] warn_slowpath_null+0xd/0x10 [<c1095936>] vfs_kern_mount+0xc5/0x14e [<c1095a03>] do_kern_mount+0x32/0xbd [<c10a811e>] do_mount+0x671/0x6d0 [<c1073794>] ? __get_free_pages+0x1f/0x21 [<c10a684f>] ? copy_mount_options+0x2b/0xe2 [<c107b634>] ? strndup_user+0x48/0x67 [<c10a81de>] sys_mount+0x61/0x8f [<c100280c>] sysenter_do_call+0x12/0x32 This ensures to set s_bdi for nilfs and fixes the sync silent failure. Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-05-03powernow-k8: Fix frequency reportingMark Langsdorf1-1/+2
With F10, model 10, all valid frequencies are in the ACPI _PST table. Cc: <stable@kernel.org> # 33.x 32.x Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com> LKML-Reference: <1270065406-1814-6-git-send-email-bp@amd64.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Reviewed-by: Thomas Renninger <trenn@suse.de> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-03watchdog: ep93xx_wdt.c fix default timout value in MODULE_PARM_DESC string.Wim Van Sebroeck1-1/+1
The WATCHDOG_TIMEOUT macro does not exist. The default timeout value is WDT_TIMEOUT. Fix the MODULE_PARM_DESC so that the code can compile again. reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2010-05-03x86: Fix parse_reservetop() build failure on certain configsIngo Molnar1-0/+1
Commit e67a807 ("x86: Fix 'reservetop=' functionality") added a fixup_early_ioremap() call to parse_reservetop() and declared it in io.h. But asm/io.h was only included indirectly - and on some configs not at all, causing a build failure on those configs. Cc: Liang Li <liang.li@windriver.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Wang Chen <wangchen@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <1272621711-8683-1-git-send-email-liang.li@windriver.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-01perf: Fix resource leak in failure path of perf_event_open()Tejun Heo1-1/+1
perf_event_open() kfrees event after init failure which doesn't release all resources allocated by perf_event_alloc(). Use free_event() instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Mackerras <paulus@au1.ibm.com> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <4BDBE237.1040809@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-05-01x86: Fix NULL pointer access in irq_force_complete_move() for Xen guestsPrarit Bhargava1-0/+3
Upstream PV guests fail to boot because of a NULL pointer in irq_force_complete_move(). It is possible that xen guests have irq_desc->chip_data = NULL. Test for NULL chip_data pointer before attempting to complete an irq move. Signed-off-by: Prarit Bhargava <prarit@redhat.com> LKML-Reference: <20100427152434.16193.49104.sendpatchset@prarit.bos.redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Cc: <stable@kernel.org> [2.6.33]
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-07 07:38:11 +0300