summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-17Merge branch 'devel-pmu' into develRussell King18-1950/+1316
2010-05-17ARM: 6136/1: ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIOHartley Sweeten1-21/+1
The ARCH_REQUIRE_GPIOLIB config option will select GPIOLIB which in turn will select GENERIC_GPIO. Because of this, there is no reason to do the select GENERIC_GPIO in arch/arm/Kconfig for the architectures that have ARCH_REQUIRE_GPIOLIB. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17ARM: 6074/1: oprofile: convert from sysdev to platform deviceWill Deacon1-15/+29
This is a reworking of an original patch posted by Aaro Koskinen: oprofile does not work with PM, because sysdev_suspend() is done with interrupts disabled and oprofile needs a mutex. Implementing oprofile as a platform device solves this problem. Cc: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17ARM: 6073/1: oprofile: remove old files and update KConfigWill Deacon13-1789/+3
Enable hardware perf-events if CPU_HAS_PMU and select HAVE_OPROFILE if HAVE_PERF_EVENTS. If no hardware support is present, OProfile will fall back to timer mode. This patch also removes the old OProfile drivers in favour of the code implemented by perf. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17ARM: 6072/1: oprofile: use perf-events framework as backendWill Deacon1-52/+281
There are currently two hardware performance monitoring subsystems in the kernel for ARM: OProfile and perf-events. This creates the following problems: 1.) Duplicate PMU accessor code. Inevitable code drift may lead to bugs in one framework that are fixed in the other. 2.) Locking issues. OProfile doesn't reprogram hardware counters between profiling runs if the events to be monitored have not been changed. This means that other profiling frameworks cannot use the counters if OProfile is in use. 3.) Due to differences in the two frameworks, it may not be possible to compare the results obtained by OProfile with those obtained by perf. This patch removes the OProfile PMU driver code and replaces it with calls to perf, therefore solving the issues mentioned above. The only userspace-visible change is the lack of SCU counter support for 11MPCore. This is currently unsupported by OProfile userspace tools anyway and therefore shouldn't cause any problems. Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Jamie Iles <jamie.iles@picochip.com> Cc: Jean Pihet <jpihet@mvista.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17ARM: 6071/1: perf-events: allow modules to query the number of hardware countersWill Deacon2-0/+15
For OProfile to initialise oprofilefs correctly, it needs to know the number of counters it can represent. This patch adds a function to the ARM perf-events backend to return the number of hardware counters available for the current PMU. Cc: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17ARM: 6070/1: perf-events: add support for xscale PMUsWill Deacon1-6/+821
The perf-events framework for ARM only supports v6 and v7 cores. This patch adds support for xscale v1 and v2 PMUs to perf, based on the OProfile drivers in arch/arm/oprofile/op_model_xscale.c Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17ARM: 6069/1: perf-events: use numeric ID to identify PMUWill Deacon2-10/+43
The ARM perf-events framework provides support for a number of different PMUs using struct arm_pmu. The char *name field of this struct can be used to identify the PMU, but this is cumbersome if used outside of perf. This patch replaces the name string for a PMU with an enum, which holds a unique ID for the PMU being represented. This ID can be used to index an array of names within perf, so no functionality is lost. The presence of the ID field, allows other kernel subsystems [currently oprofile] to use their own mappings for the PMU name. Cc: Jean Pihet <jpihet@mvista.com> Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17ARM: 6064/1: pmu: register IRQs at runtimeWill Deacon3-80/+126
The current PMU infrastructure for ARM requires that the IRQs for the PMU device are fixed at compile time and are selected based on the ARCH_ or MACH_ flags. This has the disadvantage of tying the Kernel down to a particular board as far as profiling is concerned. This patch replaces the compile-time IRQ registration with a runtime mechanism which allows the IRQs to be registered with the framework as a platform_device. A further advantage of this change is that there is scope for registering different types of performance counters in the future by changing the id of the platform_device and attaching different resources to it. Acked-by: Jamie Iles <jamie.iles@picochip.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-17Merge branches 'at91', 'bcmring', 'ep93xx', 'iop', 'misc', 'nomadik', ↵Russell King250-2100/+17265
'omap', 'pxa', 'spear' and 'versatile' into devel Conflicts: arch/arm/Makefile arch/arm/common/Makefile arch/arm/mm/Kconfig
2010-05-17ARM: Optionally allow ARMv6 to use 'normal, bufferable' memory for DMARussell King3-2/+21
Provide a configuration option to allow the ARMv6 to use normal bufferable memory for coherent DMA. This option is forced to 'y' for ARMv7, and offered as a configuration option on ARMv6. Enabling this option requires drivers to have the necessary barriers to ensure that data in DMA coherent memory is visible prior to the DMA operation commencing. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: 6134/1: Handle instruction cache maintenance fault properlyKirill A. Shutemov1-0/+5
Between "clean D line..." and "invalidate I line" operations in v7_coherent_user_range(), the memory page may get swapped out. And the fault on "invalidate I line" could not be properly handled causing the oops. In ARMv6 "external abort on linefetch" replaced by "instruction cache maintenance fault". Let's handle it as translation fault. It fixes the issue. I'm not sure if it's reasonable to check arch version in run-time. Let's do it in compile time for now. Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Siarhei Siamashka <siarhei.siamashka@nokia.com> Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: nwfpe: allow debugging output to be configured at runtimeRussell King1-2/+11
Enabling CONFIG_USER_DEBUG allows NWFPE to complain about every FP exception, which with some programs can cause the kernel message log to fill with NWFPE debug, swamping out other messages. This change allows NWFPE debugging to be configured at run time. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: rename mach_cpu_disable() to platform_cpu_disable()Russell King3-3/+3
Consistently name all SMP platform related functions. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: 6132/1: PL330: Add common core driverJassi Brar4-0/+2187
PL330 is a configurable DMA controller PrimeCell device. The register map of the device is well defined. The configuration of a particular implementation can be read from the six configuration registers CR0-4,Dn. This patch implements a driver for the specification:- http://infocenter.arm.com/help/topic/com.arm.doc.ddi0424a/DDI0424A_dmac_pl330_r0p0_trm.pdf The exported interface should be sufficient to implement a driver for any DMA API. Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: 6094/1: Extend cache-l2x0 to support the 16-way PL310Jason McMullan2-5/+37
The L310 cache controller's interface is almost identical to the L210. One major difference is that the PL310 can have up to 16 ways. This change uses the cache's part ID and the Associativity bits in the AUX_CTRL register to determine the number of ways. Also, this version prints out the CACHE_ID and AUX_CTRL registers. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Jason S. McMullan <jason.mcmullan@netronome.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: Move memory mapping into mmu.cRussell King3-28/+28
Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: Ensure meminfo is sorted prior to sanity_check_meminfoRussell King2-10/+10
Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: Remove useless linux/bootmem.h includesRussell King4-4/+0
These files include linux/bootmem.h without using anything from this file; remove the unnecessary include. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15ARM: convert /proc/cpu/aligment to seq_fileAlexey Dobriyan1-27/+26
Convert code away from ->read_proc/->write_proc interfaces. Switch to proc_create()/proc_create_data() which makes addition of proc entries reliable wrt NULL ->proc_fops, NULL ->data and so on. Problem with ->read_proc et al is described here commit 786d7e1612f0b0adb6046f19b906609e4fe8b1ba "Fix rmmod/read/write races in /proc entries" This patch is part of an effort to remove the old simple procfs PAGE_SIZE buffer interface. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-15arm: use asm-generic/scatterlist.hFUJITA Tomonori1-18/+2
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-13ARM: 6107/1: plat-nomadik: use the MTU clocksrc for sched_clockLinus Walleij1-1/+27
This provides some serious scheduling for the Nomadik family by introducing a sched_clock() using the MTU clock source in the same manner as e.g. OMAP or U300. This type of solutions has been discussed at no end in the past, however we need this resolution for making measurements and using HRTimers. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-13ARM: 6124/1: ep93xx: SPI driver platform support codeMika Westerberg4-0/+70
This patch adds platform side support code for the EP93xx SPI driver. This includes clock, resources and muxing. There is a new function: ep93xx_register_spi() which can be used by board support code to register new SPI devices for the board. This patch depends on patch 5998/1 ep93xx: added chip revision reading function Cc: Ryan Mallon <ryan@bluewatersys.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi> Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Martin Guy <martinwguy@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6104/1: nomadik-gpio: use clk APIRabin Vincent3-6/+40
Add clocks with appropriate names in platforms that use it, and use the clk API in nomadik-gpio. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6103/1: nomadik: define clocks staticallyRabin Vincent3-18/+21
Add a table for clocks to be defined statically, so that new clocks can be added without having to call nmdk_clk_create() for each of them. Remove the now unused nmdk_clk_create() function. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6102/1: nomadik-gpio: set a default trigger for interruptsRabin Vincent1-0/+1
Set a default trigger type for interrupts, otherwise if request_irq is called without specifiying a trigger type, the interrupt will not actually be enabled. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6101/1: nomadik-gpio: don't enable in set_typeRabin Vincent1-4/+7
On this peripheral, setting the trigger type enables the interrupt, and the current set_type() implementation unconditionally enables the interrupt, even if it is called when the interrupt is disabled. Fix set_type() to: - if the interrupt is disabled, defer the actual trigger setting to when it is unmasked - if the interrupt is enabled, change the type immediately by clearing the old type and then re-enabling with the new type. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6100/1: nomadik-gpio: factor out helper to enable/disable irqsRabin Vincent1-30/+27
Remove some nearly-duplicated code to make the following patch simpler. Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-06ARM: 6099/1: nomadik-gpio: fix mask/unmaskRabin Vincent1-8/+8
Mask/unmask should modify the interrupt mask register (RIMSC and FIMSC) not the wakeup mask registers (RWIMSC and FWIMSC). Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-05ARM: 5966/1: at91_udc HW glitchHarro Haan1-0/+7
Add some delay to avoid reading CSR TXCOUNT too early after updating it. For more info about this HW glitch see: http://lists.arm.linux.org.uk/lurker/message/20090325.150843.f515c02f.en.html http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100129/10ba0f8b/attachment.el http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/09cdb3b4/attachment.el http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20100203/08b5b249/attachment.el First applied: "Fix soft lockup in at91 udc driver" http://www.arm.linux.org.uk/developer/patches/viewpatch.php?id=5965 Signed-off-by: Anti Sullin <anti.sullin@artecdesign.ee> Signed-off-by: Harro Haan <hrhaan@gmail.com> Acked-by: Remy Bohmer <linux@bohmer.net> Acked-by: Andrew Victor <linux@maxim.org.za> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6090/1: ux500: add U5500 supportRabin Vincent9-6/+166
Add basic support for the U5500 platform. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6089/1: ux500: rename cpu-u8500.c to cpu-db8500.cRabin Vincent2-1/+1
Move the DB8500-specific file to a more appropriate name. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6088/1: ux500: use UX500_* macros instead of U8500_*Rabin Vincent2-6/+6
So that the correct addresses get used on U5500. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6087/1: ux500: move sys_timer to cpu.cRabin Vincent4-23/+23
Move the common system timer setup code to cpu.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6086/1: ux500: move gpio devices to devices-db8500.cRabin Vincent3-36/+40
The GPIO layout is different on DB5500, so move the current one to devices-db8500.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6085/1: ux500: reorganize i2c devicesRabin Vincent5-40/+88
Move common i2c devices to devices.c and DB8500-specific I2C devices to devices-db8500.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6084/1: ux500: move UART devices to devices.cRabin Vincent3-25/+27
The three PL011 UARTs are common among Ux500 SoCs, so move them to devices.c. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6083/1: ux500: put DB8500-specific devices in devices-db8500.cRabin Vincent4-18/+36
Add devices-db8500.c for DB8500-specific devices, starting with SSP0. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6082/1: ux500: put common devices into devices.cRabin Vincent7-15/+70
Introduce devices.c, for placing devices common among Ux500 SoCs. Start with the PL031 device. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6081/1: ux500: move gpio macros to common headerRabin Vincent2-30/+38
Move GPIO macros to a common header, and allow them to use the correct macros for the appropriate SoC, and be named accordingly. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6080/1: ux500: move irq and common maps to cpu.cRabin Vincent5-46/+83
Move IRQ initialization and common io mapping setup code to cpu.c, renaming U8500* to UX500* along the way. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6079/1: ux500: allow choice of the DEBUG_LL UARTRabin Vincent2-2/+17
Allow the UART used for DEBUG_LL to be selected. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6078/1: ux500: add per-SoC register definitionsRabin Vincent4-116/+302
Split up all the hardware register definitions previously found in hardware.h into per-SoC files db8500-regs.h and db5500-regs.h. Rename a couple of macros to prepare for sharing code between the variants. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6077/1: ux500: add SOC Kconfig variablesRabin Vincent2-6/+29
This adds the different config options for SoCs DB8500 and DB5500 and refines the SoC/CPU detection code to support the DB5500 as well via these. The selection between DB5500 and DB8500 is currently a simple compile-time choice. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6092/1: atmel_serial: support for RS485 communicationsClaudio Scordino3-37/+181
Final version of the patch that adds support for RS485 communications to the atmel_serial driver. The patch has been already sent and discussed on both linux-kernel and linux-arm-kernel mailing lists several times. Many people collaborated to improve and test the code: Tested-by: Sebastian Heutling <Sebastian.Heutling@who-ing.de> Tested-by: Bernhard Roth <br@pwrnet.de> Reviewed-by: Ryan Mallon <ryan@bluewatersys.com> Signed-off-by: Claudio Scordino <claudio@evidence.eu.com> Signed-off-by: Michael Trimarchi <michael@evidence.eu.com> Signed-off-by: Rick Bronson <rick@efn.org> Signed-off-by: Sebastian Heutling <Sebastian.Heutling@who-ing.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-04ARM: 6091/1: ST SPEAr: Adding support for shared irq layerviresh kumar11-8/+718
Multiple peripherals in SPEAr share common hardware interrupt lines. This patch adds support for a shared irq layer, which registers hardware irqs by itself and exposes virtual irq numbers to peripherals. Signed-off-by: Viresh Kumar <viresh.kumar@st.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-03ARM: 6053/1: AT91: Save power by disabling the processor clock when CPU is idleAnders Larsen1-2/+5
Disable the processor clock when the CPU is idle. This saves much more power than merely entering 'Wait for Interrupt' mode. Since JTAG-debugging doesn't work when the processor clock is switched off, make it conditional on CONFIG_DEBUG_KERNEL. Signed-off-by: Anders Larsen <al@alarsen.net> Acked-by: Andrew Victor <avictor.za@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: 6057/1: Realview: register PMU IRQs during board initialisationWill Deacon7-0/+164
This patch updates the initialisation routines for the Realview boards and the Versatile Express board [ca9x4 tile] so that they register their PMU IRQs with the PMU framework in the Kernel. Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Add Versatile Express SMP supportRussell King6-2/+281
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-05-02ARM: Add Versatile Express CA9x4 processor supportRussell King5-1/+266
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-29 09:10:55 +0300