summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-03-07video: Add i.MX23/28 framebuffer driverSascha Hauer4-0/+978
changes since v2: - use v3 and v4 for specifying the ip version instead of i.MX23/28. This is a better namespace when future versions are added. - rename mach/fb.h to mach/mxsfb.h changes since v1: - Add a LCDC_ prefix to the register names. - use set/clear registers where appropriate - protect call to mxsfb_disable_controller() in mxsfb_remove() with a (host->enabled) as suggested by Lothar Wassmann Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-fbdev@vger.kernel.org
2011-03-07ARM: mxc91231/iomux: allow pin_list to be constUwe Kleine-König2-11/+11
While at it remove some useless consts from unsigned int arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: iomux-imx31: allow pin_list to be constUwe Kleine-König2-10/+10
This fixes the following warning in a mx3_defconfig build: arch/arm/mach-mx3/mach-bug.c: In function 'bug_board_init': arch/arm/mach-mx3/mach-bug.c:47: warning: passing argument 1 of 'mxc_iomux_setup_multiple_pins' discards qualifiers from pointer target type While at it remove some useless consts from unsigned int arguments. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx53_smd: Add I2C supportFabio Estevam2-0/+9
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx25_3ds: Add I2C supportFabio Estevam2-0/+10
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx27_3ds: Add I2C supportFabio Estevam2-0/+8
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx31_3ds: Add I2C supportFabio Estevam2-0/+9
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx35_3ds: Add I2C supportFabio Estevam2-0/+9
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: Add SSI and aic3204 code to Visstrim_M10 boards.Javier Martin2-0/+15
Visstrim_M10 boards have an TI tlv320aic3204 codec attached to SSI1. Signed-off-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mx3/cpuimx35: fix build failureUwe Kleine-König1-1/+1
It seems vim's autocompletion played tricks on me without me noticing. This was intruduced in 97976e2 (ARM: mx3: use .init_early to initialize cpu type, reset address and iomuxer) Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx53_loco: add esdhc device supportRichard Zhu2-0/+3
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx51/53: add sdhc3/4 clockRichard Zhu2-1/+146
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07arm: mxs: tx28: add i2c bus and connected RTCWolfram Sang2-0/+11
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07arm: mxs: add i2c-devices for mx28Wolfram Sang5-0/+67
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add registration functions for SPI.Gwenhael Goavec-Merou1-0/+7
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Add data structure for SPIGwenhael Goavec-Merou1-0/+9
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Register clock for SPI2Gwenhael Goavec-Merou1-0/+1
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07MX1: Rename SPI interrupt name and base address.Gwenhael Goavec-Merou1-3/+4
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx35: fix trivial copy/paste errorRyan Lortie1-1/+1
Change imx31_add_imx_keypad() to imx35_add_imx_keypad() in mach-mx3/devices-imx35.h. Signed-off-by: Ryan Lortie <desrt@desrt.ca> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: imx35: fix ATA_DATA3 pad control addressRyan Lortie1-7/+7
According to the "i.MX35 (MCIMX35) Multimedia Applications Processor Reference Manual" the correct address for the pad control register IOMUXC_SW_PAD_CTL_PAD_ATA_DATA3 is 0x06ec, not 0x6e8. Signed-off-by: Ryan Lortie <desrt@desrt.ca> Acked-by: Marc Reilly <marc@cpdesign.com.au> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07i.MX25: add sdma clock definitionsEric Bénard1-0/+3
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-07ARM: mxs: Initial support for Ka-Ro TX28Lothar Waßmann7-2/+335
Based on code created by Lothar Waßmann, Sascha Hauer, Wolfram Sang and me. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-07ARM: mxs: Add missing EXPORT_SYMBOL for mxs_reset_blockSascha Hauer1-0/+2
It is used for example in the i2c driver which can be compiled modular. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-01ARM: mxs: Add pwm clocks and device registrationSascha Hauer9-2/+49
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-01ARM: mxc: add a dma mask to fec devicesUwe Kleine-König1-2/+2
This is not strictly necessary but the right thing to do. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-01ARM: mxs: add a dma mask to fec devicesLothar Waßmann1-2/+3
This is not strictly necessary but the right thing to do. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-01ARM: mxc: free dma_mask in error pathUwe Kleine-König1-0/+2
This fixes a small memory leak that was only hit in very unlikely error paths Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-01ARM: mxs: free dma_mask in error pathLothar Waßmann1-0/+2
This fixes a small memory leak that was only hit in very unlikely error paths. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2011-03-01cpuimx51sd: mcp2515 supports up to 10MHz SPI clockEric Bénard1-1/+1
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01cpuimx51sd: fix tsc2007Eric Bénard1-7/+1
- wrong MUX was set before for IRQ - get_pendown_state is no more needed Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01cpuimx51sd: add cpufreq supportEric Bénard1-0/+5
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01eukrea-tlv320: add MBIMXSD51 supportEric Bénard2-2/+4
Signed-off-by: Eric Bénard <eric@eukrea.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-03-01arm: mach-mx3: use IMX_GPIO_NR instead of hard-coded valuesWolfram Sang3-6/+6
The latter are error-prone because the bank number is one less than one would read in the documentation. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Eric Benard <eric@eukrea.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-28mx31: add support for the bugbase 1.3 from buglabsDenis 'GNUtoo' Carikli4-0/+80
Note that the hardware schematics and documentations can be obtained here: http://www.bugcommunity.com/wiki/index.php/BUGbase Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-28ARM: mx51_defconfig: change CONFIG_LEDS_CLASS 'm' to 'y'Shawn Guo1-1/+1
This patch is to fix the warning below. arch/arm/configs/mx51_defconfig:113:warning: symbol value 'm' invalid for LEDS_CLASS Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-28ARM: imx/mach-mx25_3ds: Use IMX_GPIO_NR instead of hard-coded valuesFabio Estevam1-2/+2
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-28ARM: imx53: add sdhc pad settingsRichard Zhu1-40/+43
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-21ARM: imx53: correct Silicon Revision definition following fuse mapRichard Zhao1-3/+8
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-21ARM: imx53_smd add uncompress printFrank Li1-0/+1
Signed-off-by: Frank Li <Frank.Li@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx50: correct iomux-mx50.h wrong daisy chain settingsRichard Zhao1-22/+22
Most fix is for uart txd/cts. They don't need to select input. And fix some other pads with wrong select input. Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx53_loco: add i2c device supportRichard Zhao2-0/+7
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx53_loco add uncompress printRichard Zhao1-0/+1
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: imx53_loco: add all pad configure.Richard Zhao1-0/+137
Signed-off-by: Richard Zhao <richard.zhao@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: mach-mx5: Add watchdog support for MX53 based boardsFabio Estevam4-0/+6
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18ARM: mx5: Add watchdog support for MX53Fabio Estevam5-2/+17
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18mx51: add support for efika smartbookArnaud Patard (Rtp)3-0/+291
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18efika: enable cpufreqArnaud Patard (Rtp)1-0/+5
Enable cpufreq on Genesi efika platforms Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18efikamx: add mc13892 support / implement power offArnaud Patard (Rtp)2-0/+407
This patch declares regulators for the efikamx. Use it also to power off the efikamx. Unfortunately, on the efikamx to2 boards, this doesn't work but they allow to power off by setting GPIO 4 13 to high level instead of powering off through the mc13892. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18efikamx: add usb h1 supportArnaud Patard (Rtp)4-4/+122
Now that usb has been fixed, we can enable usb h1 on efikamx Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2011-02-18Introduce EFIKA_COMMONArnaud Patard (Rtp)5-128/+191
The Genesi EFIKA MX and EFIKA Smartbook are sharing a lot of things so it makes sense to create a common file for both devices and a specific file for each. No functionnal change except dropping uart 1 & 2. Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org> Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-13 18:14:05 +0300