summaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-12-14Merge branch 'master' of ↵John W. Linville13-64/+70
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: drivers/net/wireless/iwlwifi/iwl-agn.c
2011-12-14iwlwifi: allow to switch to HT40 if not associatedWey-Yi Guy1-2/+2
My previous patch 34a5b4b6af104cf18eb50748509528b9bdbc4036 iwlwifi: do not re-configure HT40 after associated Fix the case of HT40 after association on specified AP, but it break the association for some APs and cause not able to establish connection. We need to address HT40 before and after addociation. CC: stable@vger.kernel.org #3.0+ Reported-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Tested-by: Andrej Gelenberg <andrej.gelenberg@udo.edu> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14iwlwifi: tx_sync only on PAN contextJohannes Berg1-0/+6
Ted reported that he couldn't connect to some APs and bisected it to the tx_sync implementation. Disable it for the BSS context to fix this issue. Reported-by: Ted Ts'o <tytso@mit.edu> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mwifiex: avoid double list_del in command cancel pathYogesh Ashok Powar1-7/+2
Command cancel path cancels the current command and moves it to free command queue. While doing that it deletes the command entry from the pending list. This is not correct as the entry has been already deleted from the pending list at 'mwifiex_exec_next_cmd'. Fixing it. Also making sure the stale command pointer is cleaned and unaccessible for later use. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: avoid calling bcma_* if CONFIG_B43_BCMA is not setJohn W. Linville1-0/+4
Avoids this: ERROR: "bcma_chipco_pll_write" [drivers/net/wireless/b43/b43.ko] undefined! Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mwifiex: do not advertise custom regulatory domain capabilityAmitkumar Karwar1-3/+0
mwifiex driver no longer supports it's own custom regulatory rules, but custom regulatory domain capability is still advertised during wiphy registration by the driver. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: register with bcma for specific 802.11 core revisionsArend van Spriel1-2/+2
The brcmsmac driver has been verified on chipsets that were supported when it was a pci device driver, ie. bcm4313, bcm43224, and bcm43225. This patch restricts the driver to 802.11 core revisions that are found in these chipsets. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: cleanup buscore handling in aiutils.cArend van Spriel3-44/+34
Instead of storing the buscore information now the BCMA core device is kept for quick reference in si_info structure. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: cleanup si_info structure definitionArend van Spriel2-67/+11
Number of fields are no longer needed as the BCMA provides it or makes them redundant. These have been removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: remove mapped core related function from aiutils.cArend van Spriel4-184/+59
In aiutils.c the selected core was maintained by its index number. This is obsolete using BCMA functions so several functions using that index have been removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: remove ai_switch_core() functionArend van Spriel5-69/+7
The function ai_switch_core() is no longer needed and its counterpart ai_restore_core() as well, because interrupts disabling is not needed anymore. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: remove interrupt disable callback functionalityArend van Spriel3-57/+0
There is no need to interrupt disable/enable functionality any longer due to BCMA usage assures the correct core is accessed in any context. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: INTROFF/INTRESTORE macros removedArend van Spriel1-24/+6
The macros were used to assure that the correct core was accessed in the ISR, but register access is now done giving the explicit core so no need to change interrupt state. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: remove empty or unused functions from pmu.cArend van Spriel3-66/+1
A number of functions in pmu.c are not used or adding no functionality at all. These have been removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: remove register access macro definitionsArend van Spriel1-51/+0
The register access macros like R_REG/W_REG/etc. are no longer needed as the driver uses the BCMA provided functions. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma core access functions in aiutils.cArend van Spriel1-120/+70
The code in aiutils.c now uses the BCMA function for control the registers in the device cores. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma core access functions in pmu.cArend van Spriel1-80/+73
The code in pmu.c now uses the functions provided by BCMA to access the core registers. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma core access function in srom.cArend van Spriel3-37/+17
The code in srom.c now uses the core access function provided by BCMA so no need to pass __iomem pointer any longer. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma core access functions in otp.cArend van Spriel2-42/+28
The code in otp.c now uses the bcma core access functions to read the OTP information from the device. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: change ai_findcoreidx() to ai_findcore()Arend van Spriel2-7/+9
Instead of returning the core index the function now returns the bcma device for the requested core id. This function is now exposed in the header file. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: update TX power fixRafał Miłecki1-5/+27
Specs were updated. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: workaround broken auto-increment on BCM43224Rafał Miłecki1-0/+6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: fix 32-bit reads of tablesRafał Miłecki1-6/+6
The order is different than on older PHYs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14bcma: extract revision and TX power IDs from SPROMRafał Miłecki1-0/+39
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mac80211: don't check sdata_running in vif notifierEliad Peller1-4/+1
The ip address of the vif can be set even before the vif is up. requiring the vif to be up in the vif notifier makes the notifer ignore this event, which causes wrong arp filter configuration later on. Reported-by: Eyal Shapira <eyal@wizery.com> Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mac80211: configure BSS_CHANGED_ARP_FILTER on reconfigurationEliad Peller1-1/+2
Configure arp filtering on sta reconfiguration. Signed-off-by: Eliad Peller <eliad@wizery.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mac80211: Do not request FIF_BCN_PRBRESP_PROMISC for HW scan.Dmitry TARNYAGIN1-3/+3
ieee80211_configure_filter code used local->scanning as a boolean value when it was a bit mask. Bits SCAN_COMPLETED, SCAN_ABORTED should not set FIF_BCN_PRBRESP_PROMISC filter. SCAN_HW_SCANNING should not set FIF_BCN_PRBRESP_PROMISC either, as there is no explicit filter configuration request from scan code. If a driver requires FIF_BCN_PRBRESP_PROMISC mode during HW scanning, it's up to the driver to temporary enable it. Similar mistake was fixed also in ieee80211_hw_config (power configuration code). Verified-by: Vitaly Wool <vitaly.wool@sonyericsson.com> Signed-off-by: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14rtlwifi: merge ips,lps spinlocks into one mutexStanislaw Gruszka3-15/+12
With previous patch "rtlwifi: use work for lps" we can now use mutex for protecting ps mode changing critical sections. This fixes running system with interrupts disabled for long time. Merge ips_lock and lps_lock as they seems to protect the same data structures (accessed in rtl_ps_set_rf_state() function). Reported-by: Philipp Dreimann <philipp@dreimann.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Mike McCormack <mikem@ring3k.org> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Tested-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14rtlwifi: use work for lpsStanislaw Gruszka2-13/+16
Leaving leisure power save mode can take some time, so it's better to perform that action in process context with interrupts enabled. This patch changes lps_leave tasklet to work. Reported-by: Philipp Dreimann <philipp@dreimann.net> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Mike McCormack <mikem@ring3k.org> Cc: Chaoming Li <chaoming_li@realsil.com.cn> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: implement spurious tone avoidanceRafał Miłecki1-2/+91
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: finish 2.4GHz 0x2056 radio setupRafał Miłecki3-1/+105
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: determine various PHY paramsRafał Miłecki2-0/+43
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: add table for antenna software controlRafał Miłecki2-1/+52
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: workaround BCM43224 hw bug in writing table id 9Rafał Miłecki1-0/+7
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: update some init valuesRafał Miłecki2-17/+17
Changes were obtained from MMIO dump from 5.100.82.112. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14b43: N-PHY: random trivial fixes for typos, missing writesRafał Miłecki3-23/+30
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14ath9k: make two mci related functions staticFelix Fietkau2-8/+4
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14bcma: support for suspend and resumeRafał Miłecki3-0/+56
bcma used to lock up machine without enabling PCI or initializing CC. Cc: stable@vger.kernel.org Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mwifiex: wakeup and stop multiple tx queues in net_deviceAvinash Patil6-12/+63
replace single queue function calls with equivalent multiple queue functions. Wakeup queue and stop queue calls are guarded by spin lock. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mwifiex: proper cleanup when RX multiport aggregation failsAvinash Patil1-3/+19
Free SKBs allocated during multiport aggrgation setup when RX multiport aggregation fails in the middle. With this handling freeing SKB in mwifiex_process_int_status() for failure case is removed. Also handles single RX transaction failure. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14mwifiex: failure case handling for PCIe eventsAmitkumar Karwar1-14/+6
Event buffers for PCIe interface are allocated during driver initialisation, and respective physical addresses are sent to FW in *_PCIE_DESC_DETAILS command so that FW can do DMA. These buffers will be freed while unloading the driver. Therefore we should not free them in event handling error path. Also we should skip next pending events in failure case. Also fixed 'returning -1 instead of -ENOMEM is sloppy' warnings. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma core access functions in nicpci.cArend van Spriel3-111/+90
Code in nicpci.c now uses the PCI(E) core as provided by the BCMA bus driver to configure that core. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma core control functionsArend van Spriel5-140/+47
BCMA provides functions to control the state of the cores so using that and remove similar implementation from the driver. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: remove unused functions and/or prototypesArend van Spriel2-151/+1
Several functions provided by aiutils.c are not used in brcmsmac driver and have been removed. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: replace ai_corereg() function with ai_cc_reg()Arend van Spriel7-87/+68
The ai_corereg() function is only used in the driver to safely access the chipcommon core. The function has been renamed to ai_cc_reg() removing the need to provide a core index parameter. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: remove SI_FAST() macro usageArend van Spriel1-122/+35
The use of SI_FAST() macro interferes with the BCMA integration as it causes BCMA and aiutils.c to get out of sync on what the current core is. When everything is using BCMA we will try to add SI_FAST functionality to BCMA to avoid unnecessary core switching. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma functions for register access in phy codeArend van Spriel7-176/+162
This adds the use of bcma functions to access the registers within the phy source code. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma function for register access in dma.cArend van Spriel3-91/+108
The dma.c source file now uses the register access functions provided by bcma. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use DMA-API calls for descriptor allocationsArend van Spriel3-30/+35
Using BCMA hides the specifics about the host interface. The driver is now using the DMA-API to do dma related calls. BCMA provides the device object to use in the DMA-API calls. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-14brcm80211: smac: use bcma core register access functions for 802.11 coreArend van Spriel5-267/+274
The driver now uses the bcma register access functions to read and write the registers on the 802.11 core. The dma and phy code need to be modified next and access to the other cores. That will be done in coming patches. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Alwin Beukers <alwin@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-01-26 22:51:06 +0300